Used Mkf Gmbh Cs 70D for sale (71,532)

Condition: new, Equipment: lighting, Take your painting process to a new level - with mobile convenience. Mobile paint booths in container design for painting and coating various objects. They are specially designed for mobility so that they can be easily transported and set up on different construction sites. The booth is usually equipped with a ventilation system to ensure air quality, lighting and a filter system that prevents paint mist from escaping. The ventilation system ensures that the vapors and particles released during painting are kept inside the booth so that there is no danger to the environment. Mobile paint booths are a practical and flexible solution for companies that need an effective painting system that can be moved from one construction site to another at any time. Overview of the design and functions Our mobile 20-foot Sapi painting containers consist of a robust steel frame with welded wall and ceiling panels. Inside, we can add special equipment such as cranes or lifting devices. The floor is made of tear plate. There are ventilation grilles in both door leaves, which are fitted with fine-pored filter mats. One leaf is designed as an escape door for safety reasons and has a viewing window. It should also be mentioned that these are not simply converted shipping containers! We manufacture all our containers from scratch ourselves. We only use the most stable materials that meet the requirements and have also been tested and proven in terms of safety. Normal shipping containers would not meet the required safety standards. Paint extraction system in the mobile painting container The paint mist extraction wall for paint mist separation is located in front of the rear wall and is equipped with multi-layer filter mats. The extraction wall consists of a galvanized housing, edged with baffle plates including various suspension and fastening elements for the filter equipment. The powerful and EX-protected extraction fan with drive motor is installed on a console in the rear wall area on the outside of the container. Kodpfx Aaeun Shgo Rodt Next-generation mobile spray booths: meeting EU requirements and advancing coating solutions The new generation of mobile spray booths must meet the highest EU requirements. The consideration of new paint systems such as hydro paints, polyurethane resins, epoxy-zinc dust or epoxy-iron-mica paints places high demands on existing paint booths. That is why we have developed a new and unique mobile paint booth for the next generation of coating solutions. An important criterion is the transportation of the workpieces for painting and for further processing steps. Do you need more information? Our engineers can offer expert advice and support. Whether paint mist dry separation or wet scrubbing, air humidification or air drying, condensation drying in a low-temperature process or hot air drying, whether pre-treatment of the workpieces by high-pressure washing with water flow in a circulation system or by compressed air blasting or wheel blasting technology.

Condition: new, Year of construction: 2025, power: 5 kW (6.80 HP), SAPI Premium 200-liter pressure blast machine with cyclone cleaner and abrasive vacuum for abrasive treatment. This blasting system provides a cost-effective, highly economical, and effective solution for open blasting work with semi-automatic abrasive recycling. Open blasting system for manual sandblasting of many different types of workpieces using a blaster with abrasive treatment. The abrasive is collected by hand after blasting and pushed into the collection hopper on the floor. The abrasive vacuum extracts the abrasive from the hopper and pulls it through the cyclone cleaner. The dust is extracted and collected in the dust container of the vacuum. Coarse particles are separated by a sieve. The cleaned abrasive falls back into the vented pressure blast pot and is available for reuse. Our SAPI safety shut-off ensures a safe and economical blasting process. The remote control allows you to start and stop the blast pot using a hand lever mounted on the blast hose package. This is a highly economical and effective solution for open blasting operations with semi-automatic abrasive recycling. The scope of delivery includes: SAPI Premium 200-liter blast pot with 1 1/4" piping, pressure-regulated from 0.1 - 12 bar, max. operating pressure 12 bar High-performance 1 1/4" water separator, permanently installed on the unit SAPI safety shut-off device Cyclone cleaner for abrasive preparation with lifting device Abrasive sieve (inserted sieve in the blast pot hopper) Filling hopper 500x500x380 mm Kdsdpfx Aewc Rcnja Rjt 4-meter connecting hose from the filling hopper to the cyclone cleaner 3-meter connecting hose from the cyclone cleaner to the abrasive vacuum cleaner Abrasive vacuum cleaner 5.5 kW, 400 V, 50 Hz with 70-liter dust container 10-meter blast hose package 25x7 mm, fully assembled with nozzle holder, hand lever, control line, and blast hose coupling Boron carbide Venturi long nozzle (diameter optionally 6 mm) mm, 8 mm or 10 mm)

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, total width: 2,438 mm, total height: 2,896 mm, total length: 6,058 mm, overall weight: 3,300 kg, workpiece weight (max.): 5,000 kg, filter area: 40 m², tank capacity: 200 l, Equipment: lighting, We offer an absolute innovation! A high-quality high-cube container for both indoor and outdoor use. This container is made of durable Corten steel, ensuring a lifespan of at least 30 years. It is fully sealed, windproof, and waterproof. What’s included? Kodsuiwu Hjpfx Aa Rjdt ✔ Premium 200 pressure blasting unit with manual abrasive recycling, capable of processing and reusing all common reusable abrasives. ✔ Integrated filtration system inside the container (including impact pre-separator, connecting elements, etc.). ✔ Pre-installed electrical system and LED lighting for immediate use. Robust, safe, and ready for versatile applications! This unit is immediately operational and designed for various industrial uses. Transport Available Transport can be arranged upon request, with pricing based on daily rates. If you are interested or have any questions, feel free to contact me! For detailed information or a quote, please do not hesitate to reach out to me directly. I am happy to assist you! We also offer rent-to-own and leasing options for this sandblasting container. For inquiries or a price quote, please contact Mr. Andreas Wallner at any time.

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: lighting, Modern painting systems and drying rooms must meet higher requirements than just a few years ago. The use of new coating systems, such as hydro-based paints, polyurethane resins, and epoxy-zinc powder or epoxy-iron glitter paints, demands advanced paint room solutions. A key aspect is the workpiece transport to the painting system and further processing. Our engineers offer expert guidance, whether it's dry overspray removal, wet washing, air humidification, or air drying, condensation drying at low temperatures, or hot air drying. We also provide pre-treatment solutions such as high-pressure washing with water circulation systems or compressed air blasting or wheel blasting techniques. Key Components of a Modern Painting System: Painting Booth: The key element of our system, equipped with advanced air filtration and ventilation systems to ensure a dust-free environment for top-quality results. 🎨 Air Treatment: Essential for maintaining the air balance in the spray booth by drawing in filtered air to replace the air exhausted by the ventilation system. 🌬️ Exhaust System: Removes overspray and volatile organic compounds (VOCs) from the booth, ensuring good air quality and operator safety. 🌿 Drying & Curing Oven: After painting, parts are transferred to the oven to cure and obtain a durable, high-quality surface. 🔥 Conveyor System: An automated conveyor moves parts from the spray booth to the oven, ensuring efficiency and consistency. 🚜 Control Panel: Kdodpfx Aaeun R Ufj Rst The brain of the system, where the operator controls everything from ventilation to temperature and conveyor speed. ⚙️ Lighting: LED-based lighting provides excellent visibility while also offering energy savings. 💡 Why Choose Our Painting & Drying Systems: Quality: Carefully designed with advanced features to ensure greater efficiency and performance. 🎯 Safety First: Efficient exhaust systems, fire suppression, and fire-resistant materials ensure a safe working environment. 🛡️ Customization: We offer customizable solutions that cater to your specific needs and preferences. 🛠️ Easy Maintenance: Our systems are designed to be easy to maintain, with durable and easy-to-clean materials. 🔧 Excellent Support: We provide top-notch customer service and technical support for installation, troubleshooting, and optimal maintenance. 🧰 Environmental Responsibility: Our systems are designed to be energy-efficient and environmentally friendly, minimizing pollution and making them a sustainable choice for surface treatment. 🌍 Complete Solutions for Painting Systems: Conveyor Systems: Automated transport systems for painting and blasting booths, with intersections and switching systems for parts up to 2000 kg. 🚛 Easy-to-Replace Filters: Painting booths with ceiling exhausts and easy-to-replace filter elements. 🧹 Versatile Heating & Drying Solutions: Heating options include oil, gas, or electrical heating, as well as cross-flow heat exchangers and activated carbon filters for solvent-heavy processes. 🌡️ Integrated Paint Supply System: An integrated paint supply system with airless pumps for full coverage in the painting booth. 🎨 Our complete solutions provide everything you need for efficient and safe painting operations. Get in touch with our experts today to optimize your painting system!

Condition: new, SAPI Powder Coating The Perfect Coating for Lasting Protection. Powder coating is a highly effective and widely used method for applying a protective and decorative surface to various types of substrates. It is a dry finishing process where a fine powder made of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. Kdodpfxoun Sd Uj Aa Rot To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared first. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for ensuring that the powder bonds effectively to the substrate, creating a strong and long-lasting coating. Components of a Powder Coating System A typical powder coating system consists of several components and devices required for applying and curing the powder coating. Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures an even distribution of the powder. 🎨 Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. 💨 Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It typically includes devices like powder pumps, feed hoses, and powder sieves to transport the powder from storage to the spray gun. 🔄 Pre-treatment Equipment Pre-treatment systems are used to prepare the substrate before applying the powder coating. This can include processes like cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. 🧼 Curing Oven A curing oven is a crucial component of a powder coating system. It is used to heat the coated substrate to the correct temperature so the powder coating melts, flows, and hardens into a permanent surface. The oven usually consists of a conveyor system or racks to transport the coated parts through the oven chamber. 🔥 Exhaust System An exhaust system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe work environment for the personnel and prevents the accumulation of powder particles in the air. 🌬️ Looking for a Powder Coating Solution? Are you searching for a custom powder coating solution? We specialize in providing tailored powder coating solutions to meet your individual needs. Whether you have specific color requirements, complex designs, or challenging substrates, our experienced team is ready to deliver exceptional results. 💡 Contact us today to discuss your requirements, and let us develop a custom powder coating solution for you. 📞 Get in touch with us today!

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: SAPI Jumbo, pressure: 12 bar, total width: 3,087 mm, total height: 2,078 mm, total length: 3,692 mm, overall weight: 3,000 kg, inner dimension width: 2,340 mm, inner dimension length: 3,520 mm, inner dimension height: 2,500 mm, workpiece weight (max.): 500 kg, filter area: 20 m², Equipment: lighting, Efficient and Ready-to-Use JUMBO Blasting Cabin This fully assembled, walk-in JUMBO blasting cabin provides a comprehensive solution for efficient blasting operations. Equipped with two LED blasting lights, it ensures optimal illumination of the workspace. The double-wing door allows easy access and handling of larger workpieces, while the blast-resistant rubber lining on the walls protects the interior from wear and extends the cabin’s lifespan. For air filtration and dust reduction, the cabin features a high-performance cartridge filter and an impact separator, ensuring a clean working environment. The flat conveyor system in the floor, covered with a grated surface, enables the automatic return transport of the blasting media, while the electric drive unit for the conveyor system guarantees smooth operation. Additionally, the cabin is equipped with a bucket elevator and a high-performance abrasive recycling unit, allowing for efficient processing and reuse of blasting media. The 38-liter pressure blasting pot provides sufficient capacity for extended blasting cycles. The package also includes a 10-meter-long blasting hose and a durable boron carbide nozzle, ensuring optimal blasting performance. Ideal for Professional Blasting Operations This blasting cabin is the perfect solution for businesses that require a reliable and efficient system for blasting work. Kodpfx Asukdfpea Rodt ✔ Custom features, such as loading trolleys, are also available upon request. ✔ Compressed air, electrical supply, and installation must be provided on-site. If you are interested or have any questions, feel free to contact us at any time!

Year of construction: 2012, operating hours: 50 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 120501, High-frequency generator, 70 kW, frequency range: 120 - 450 kHz, including energy controller, current controller, and bus interface. Ground fault monitoring, adjustable. Kdsdpfx Ajzxwx Eoa Rst

Condition: new, tank capacity: 437 l, wall material: stainless steel, Unused, temperature-controlled stainless steel container with insulation Article number: 10910 Volume: Approx. 437L Material: 1.4404 stainless steel V4A Surface: Interior IIId, exterior satin finish Welded seams inside the container pickled, passivated and brushed Operating pressure: ATM Operating pressure for thermoplates: Max. 1.8 bar -Vertical design on three legs -Top: 1/2 hinged lid, 1/2 fixed with screws, with tension handle (can be locked open) -Sheet metal grids below the hinged lid as a strainer, screwed on, removable -1x thermoplate on the cylinder, inlet/outlet connection 3/4", operating pressure max. 1.8 bar -1x thermoplate on the bottom, inlet/outlet connection 3/4", operating pressure max. 1.8 bar -Insulation t=30mm mineral wool for cylinder and bottom, welded stainless steel insulation jacket 1.4301 -Bottom: Conical bottom with central outlet and forward-extending pipe DN50 DIN11851 -Outlet valve: ball valve DN50 DIN11851, gasket EPDM/PTFE -Agitator flange on the top Container dimensions: Outer diameter: 650mm Cylindrical height: 1300mm Overall width: 750mm Overall length: 850mm Overall height: 1930mm Materials: Interior: 1.4404 / AISI 316 Exterior parts: 1.4404 / AISI 316 Features: Kdjdpezwmr Esfx Aa Ret Outlet diameter: DN50 Distance from outlet to bottom: 110mm Height of legs: 330mm Nameplate: yes Agitator: Variable speed propeller agitator for low-viscosity media Type: SRT8-1500-Vari Manufacturer: Schwarzer Rührtechnik GmbH Power: 0.75kW Speed: 1410 RPM (continuously adjustable) Voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for smooth running within the speed range -1 piece 3-blade mixing propeller Ø 138mm at the end of the agitator shaft Mixing propeller made of a stainless steel casting, highly polished -Stainless steel flange, sealing V-ring, EPDM -Motor mounted on neoprene rubber buffers Infinitely variable speed control of the agitator motor via a compact, motor-mounted frequency inverter, manufactured by Getriebebau NORD. Including potentiometer. Pre-programmed for agitator operation. Operating voltage 3PH 400V

Year of construction: 1989, condition: good (used), functionality: fully functional, machine/vehicle number: 18678, Used 100,000-liter steel tank Year of manufacture: 1989 Located in 79423 Heitersheim Price is negotiable Kodozaquwepfx Aa Rsdt

Condition: used, functionality: fully functional, The IBD Wickeltechnik industrial unwinding-shaft assembly is designed to support and controllably unwind rolls of web material. It incorporates an unwinding shaft supported by KL.S-series foot-mounted safety chucks, a CX.250.4 single-disc pneumatic brake, and forced cooling from a 24 V DC fan. The safety chucks allow for rapid shaft loading and removal, while the locked closure secures the journal during operation. The brake uses four pneumatic calipers, a 250 mm self-ventilating cast-iron disc, and a modular design that enables control of the braking torque through air pressure. The assembly is mounted on an adjustable, wheeled steel transport frame. Manufacturer: IBD Wickeltechnik GmbH Device type: industrial unwinding-shaft assembly with pneumatic brake Safety chuck model: IBD-KL.S.O.1800.0380.1.40.VT Safety chuck series: KL.S Safety chuck configuration: foot-mounted Maximum shaft and roll weight: 1800 kg Maximum safety chuck torque: 380 Nm Kedpfx Aaozw Uile Rsdt Square journal range: 30–40 mm Triangular journal size: 36 mm Brake model: CX.250.04.28.0/V.24 Brake type: pneumatic, single-disc, air-cooled Number of brake calipers: 4 Brake disc diameter: 250 mm Disc material: cast iron Minimum braking torque: 6 Nm at 0.2 bar Maximum braking torque: 640 Nm at 6 bar Maximum permissible brake speed: 2500 rpm Fan voltage: 24 V DC Safety chuck serial number: 6800.37879.1/47.18 Brake serial number: 6800.37879.12/47.18

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Kodpfx Aaszw Ug Rs Redt Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Kedpszw Ucxofx Aa Rsdt Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 07.019.0000.00 / 114247 / 006, The mobile nozzle pack installation device from Theilen Maschinenbau is designed for lifting and positioning nozzle packs during assembly work. The welded frame structure is mounted on four swivel castors and features side handles for manual movement. The upper working beam is raised by a centrally mounted hydraulic hand jack and guided by two vertical guide elements. The beam is fitted with adjustable supports and mounting pins. The maximum load capacity is 200 kg. The device was manufactured in 2020 and bears CE marking. Safety symbols indicate a hot surface, an overhead hazard and the required use of head, hand and eye protection. Manufacturer: Theilen Maschinenbau GmbH Type: Nozzle pack installation device Number: 07.019.0000.00 / 114247 / 006 Year of manufacture: 2020 Maximum load capacity: 200 kg Lifting mechanism: Hydraulic hand jack Construction: Welded frame structure Ksdpfszw T Duex Aa Redt Undercarriage: 4 swivel castors Beam guidance: 2 vertical guide elements Conformity marking: CE

Condition: like new (used), Year of construction: 2022, immediately available, warranty 12 months, excellent condition Forced convection oven for solvent-containing substances according to DIN EN 1539, 4 charging carts available on request (see image) - Max. temperature 150°C - Usable volume 1875 liters - Internal dimensions: W 1250 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Guide rails and recesses for loading the oven with a charging cart - Maximum permissible amount of flammable substances at 150°C: 83.9 g - Minimum exhaust air flow rate at 20°C: 360 m³/h - KS controller 40-1 for simple temperature control with defined ramp or hold times (1 program, 4 segments) - Controller upgrade to JUMO DICON available on request - Additionally, a simple timer is integrated, which can be started via front buttons - Connection: 30 kVA, 3 x 400 V, 57 A, 50 Hz - Heating power: 36 kW - Weight: 820 kg Kedpoxbtvfofx Aa Rjdt - Includes 4 charging carts, each with 12 trays and 24 insertion levels, available in stainless steel - Documentation, CE declaration - Electrically tested and with current DGUV test report Inspection in our warehouse by appointment. Oven, drying oven, baking oven, heating oven, industrial oven, solvent oven, paint drying oven, annealing oven, heating oven, temperature oven, drying cabinet, chamber oven, chamber dryer, sintering oven, convection drying cabinet, convection oven

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Linear Scale: Gentle and Precise Filling Technology Our linear scale is the ideal solution for simple and precise dosing and filling of products. It combines accuracy with a gentle handling process. Thanks to minimal drop heights, product damage is effectively prevented, ensuring the quality of your goods—even with delicate products. Flexible and Efficient Operating Principle The core of our technology is a straightforward yet highly effective operating principle: Products are conveyed via linear belts or vibrating troughs and precisely dosed into weighing containers. Features: - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing (coarse / medium / fine), individually programmable - Tool-free format change - Intuitive scale design enables fast conversion and easy cleaning - Product-friendly – the reduced drop height protects fragile and sensitive products - Versatile – suitable for both food and non-food applications - Accurate dosing ensures consistent product quality - Robust and hygienic: parts made of stainless steel 304, easy to clean - Compact design and durable construction save space and reduce maintenance With our linear scale, you receive a reliable, precise, and hygienic solution that increases the efficiency of your production processes. Technical Data - Weighing range: 20 g to 2000 g - Accuracy: up to 0.5 g, depending on product - 4.5-liter weighing container - Max. speed: 30 weighings/min (2-head scale) - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A Discover more weighing systems from Impuls Packaging: - Linear scales (1-head, 2-head, 4-head, incl. mixing systems for blending 2–4 products) Kedpswymlyjfx Aa Rjdt - Multihead weighers with 10 to 32 heads and mixing systems for up to 8 products (control via the system or remote control through network connection, upgradeable to live camera monitoring) - Multipack systems with up to 36 heads and up to 8 simultaneous discharges - Systems for sticky, frozen, and meat products - Special scales for stick-shaped products (e.g. pretzel sticks) including product alignment - Weighing systems for large products like salads - Fine weighing systems for accuracies up to 0.1 grams - Auger fillers (1-stage or 2-stage weighing) and powder filling (accuracy of 0.3%–1%, including automatic recalibration in conjunction with a weighing system) - and much more.

Condition: used, Year of construction: 2016, machine/vehicle number: 016, operating hours: 76,421 h, We are offering this used SIMAR GmbH eDRY 600 eDRY granulate dryer, manufactured in 2016. It has been regularly maintained and is in good working order. Kedpfozqdn Dsx Aa Rodt If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2025, functionality: fully functional, laser power: 30 W, type of cooling: air, total width: 60 mm, total height: 1,660 mm, total length: 80 mm, overall weight: 80 kg, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - signal light for indication of operating status - marking software EZCAD (optional additional laser software) - Pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with Windows operating system - dimensions: 800x 600 x 1660mm (LxWxH) Kedpjunh Hrsfx Aa Rsdt - weight: approx. 80 Kg

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,500 mm, total height: 2,050 mm, input voltage: 230 V, laser power: 30 W, laser wavelength: 1,064 nm, repeat accuracy: 0.01 mm, type of input current: AC, laser type: fiber laser, Equipment: USB port, lighting, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) Kdedsyxccrepfx Aa Ret - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Kdjdot Dig Ejpfx Aa Rst Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral cantilevers for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: autofocus function for automatic determination of the focus distance - marking software EZCAD - Pilot laser (simple preview, clear text preview) - focus finder (easy focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with operating system Windows - dimensions: 800x 600 x 1660mm (LxWxH) - Weight: approx. 80 Kg

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Kdsdpfx Aajzil S Ie Ret Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Year of construction: 2026, condition: new, Natural rubber Membrane Rubber sheet membrane Kdjdpfx Aaoi E Hp Ts Rjt In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Year of construction: 2026, condition: new, Silicone Membrane sheet for Membrane press, Silikon Membrane für Membranpressen ,Natural rubber Membran MEMBRANE for membrane presses - silicone or natural rubber Highest quality and suitable for every membrane press (foil and veneer presses). You can obtain our membranes cut to the required size or as rolls from us. In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Silicone and Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). POSSIBLITIES FOR DELIVERY: The membranes can be cut to you size or delivered in a 36m roll. SILICONE Type: SM1 -3mm Colour: milky translucent Surface: both sides smooth width (standard): 1700 or 1800 mm polymer type: Silicone hardness: 50° Shore Kdodpoff Agisfx Aa Rst thickness: 3 mm temperature range: min. -50°C/max.230°C SILICONE Type: SM1 -2mm Colour: milky translucent Surface: smooth width (standard): 1600/1800 mm polymer type: Silicone hardness: 45° +/- 3 Shore thickness: 2 mm temperature range: min. - 60 °C/max. +230°C NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Condition: new, Year of construction: 2026, Equipment: safety light barrier, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. Kdjdpfxoff Huwo Aa Rot As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: ready for operation (used), Year of construction: 2000, There are 13 LTA Type IR dust extraction systems available. They are from various production years (1997-2001), but are all the same type. The systems will be dismantled in week 35 and will then be available for delivery. The ionizer and collector will be cleaned in an ultrasonic bath, and the housing will be wiped down. More systems will become available in the coming months. Kdedpozv Ttaofx Aa Ret 20 x LTA AC3001 R, production years 2004-2011.

Condition: used, Year of construction: 2021, Technical details: voltage: 400/50 V/Hz air-pressure connection: - bar control: - Kedpfx Aey N R Hmoa Rodt capacity: 150 kg/h protection class: IP 20 temperature range: 0 - 40 °C sound level: