Used Multivac Thermoformers for sale (174)

Condition: as good as new (ex-display), operating hours: 50 h, Uhlmann thermoform packaging system UPS 4 ETX for processing PVC forming film and aluminum lidding film Basic machine in modular technology and balcony construction, with 12 modules: - Molding film holder with 2 pneumatic clamping shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for shaped film - Shaped film unwinding, clocked - 3-zone contact heating: - 6 heating circuits, individually adjustable - Simultaneous heating of min. 3 feeds - Heating plates during machine stop automatic opening - Forming station with 4-column lifting table guide - Filling section, length 1,360 mm - Safety flap on the filling section Dedjtndpzepfx Akreck Cover film unwinding on operating side with pneumatic expansion shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns lifting table guide: - Integrated overload protection - Automatic lifting of the upper sealing sealing tool when the machine stops - Free module for the installation of an additional station - Clamping gripper feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punching grid - Smoothing device - ET/DT perforating station - Monitoring of the compressed air supply with machine stop when the minimum the minimum value - Visio Scan - Electrically interlocked safety doors - Quick format change due to - plug-in format parts - Plug-in connections for cooling water supply - Main drive with frequency-controlled three-phase motor geared motor - Switch cabinet at the rear of the machine, swivel-mounted Paccontrol operating control - 10.4" TFT color display with 640x480 pixel resolution - Processor 68C030 - OS9 2.9 operating system - 2 MB SRAM, 2 MB Flash, 16 MB DRAM - SRAM card reader - IBM standard membrane keyboard - Centronics interface for external printer - PS2 interface for external keyboard - VGA interface for external monitor - Serial interface for diagnostic purposes - Arcnet interface - 8 serial interfaces for connecting devices Integrated shift register ISR Rejection of individual blister rows, e.g. overheated film in the heating station, products in the sealing station, etc. Machine control: Memory-programmable sequence control in modular design: - B&R - PLC control - Bus system with modules for CPU, inputs, outputs, temperature controller, cam controller, etc. - External program memory Technical data UPS 4 ETX: - Number of cycles: - ET range: min./max. : 15/ 50 T/min. depending on film quality, feed and format design - Format range: min./max. feed in filling area : 64/226 mm min./max. film width : 100/300 mm min./max. punching width : 28/284 mm max. drawing depth : 12 mm - Compressed air: - Inlet pressure: approx. 6 - 8 bar 4 Simtap feeders

Condition: excellent (used), Year of construction: 1999, CFS 620 | Thermoforming Packaging Machine Brand: CFS Model: 620 Machine number: 625/0118 Year of manufacture: 1999 Power supply: 230 V, 3 phase, 50 Hz Current consumption: 23/25 A Module dimensions: Main module: 3350 mm x 1300 mm x 1900 mm Additional module: 3300 mm x 1050 mm x 1100 mm Djdpfx Akjy Hl Ndersck The industrial CFS 620 thermoforming machine is an advanced unit designed for the automatic forming of packages from rigid or flexible film and for packaging food and technical products. The machine operates in a continuous cycle, performing the processes of lower film forming, filling, vacuum or protective gas flushing, sealing, and cutting of finished packs. Thanks to its modular design with a total length exceeding 6 meters, the unit offers a large loading area and high production efficiency.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, The system consists of the following components: Unwinding station with a lifting device for the rolls and a take-off device Film preheating station KVH 83 Thermoforming machine KMD52BFS TECHNICAL DETAILS Maximum forming area: 520 x 400 mm Minimum forming area: 260 x 250 mm Maximum tool dimensions: 540 x 420 mm Positive forming height: 120 mm Negative forming height: 120 mm Maximum film width: 570 mm Minimum film thickness: 200 µm Maximum film thickness: 1,200 µm Maximum speed: 45 cycles/minute MACHINE DETAILS Operating pressure: 6 bar Maximum air consumption: 50 Nl/cycle Heating power, upper heating: 15 kW Heating power, lower heating: 15 kW Vacuum pump: 100 m³/h Voltage: 3x 400 V AC + N + PE, 50/60 Hz Total connected load: approx. 80 – 90 kVA EQUIPMENT Dcedszfgglspfx Akrjk Forming station for combined forming and in-mold cutting with steel knives Stacking station, including counting and stack ejection A/B stacking function via a second ejector drive, pneumatically operated Winding station for skeleton waste, motorized Note: No molds are included in the scope of supply.

Condition: excellent (used), Year of construction: 1981, machine/vehicle number: 1345, Machine Type: Two-Roll Mixing Mill (Mischwalzwerk) Main Manufacturer: TROESTER MASCHINENBAU (Sontra, Germany) Year of Construction: 1981 Origin: Made in Germany (West Germany) Heating System: Integrated heating system, equipped with temperature sensors. Main Motor: EMOD (Herbert Odenwald Elektromotorenfabrik KG) Power: 45 kW (60 HP) Protection Class: IP 23 Current/Voltage: 88A / 380V (Delta) / 50Hz Speed (n1): 1465 U/min Gearbox (Transmission): Jahnel Getriebebau GmbH (Bochum) Type: D 450 SO Ratio: 16.4 : 1 Output Speed (n2): 89.3 U/min Oil Specifications: ISO-VG 320 Djdpfx Akjyx Etgjrsck Safety Features: Equipped with built-in temperature sensors for motor protection (Kaltleiter-Temperaturfühler 130°C).

Condition: new, Year of construction: 2017, functionality: fully functional, operating hours: 25 h, input voltage: 380 V, type of input current: three-phase, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, overall weight: 2,500 kg, saw band length: 520 mm, saw band width: 580 mm, New machine. Dcjdpfxjunia Ho Akrjk

Year of construction: 2022, condition: used, Model: TTF-520AF Forming Area: 520mm x 400 mm Forming Depth (Max.): 110mm Sheet thickness: 0.2-1.6mm Forming Speed (Max.): 30times/min Air pressure: 0.6-0.8mpa Air consumption: 3.0 m³/min Water consumption: 0.7 m³/h Sheet width (Max.): 550mm Suitable Sheet: PP, PS, HIPS, PET, PVC, PLA etc. Power supply: AC 380V, 50Hz, Three-phase, Four-wire Used power: 55Kw Dcsdpfx Akeyvh Tqjrjk Rated power: 136Kw Heating power: 75Kw Procedure: Forming-punching-cutting-stacking Dimension: L10800*W4650*H2670mm Weight: About 11.0T

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1126, film width: 540 mm, type of input current: three-phase, total width: 1,710 mm, total length: 3,070 mm, total height: 2,520 mm, overall weight: 838 kg, power: 1.9 kW (2.58 HP), Equipment: type plate available, Skinpack machine, packaging machine, thermoforming machine, vacuum forming machine -Manufacturer: Illig, skin pack machine type SK 74c -Foil width: 540 mm -Roller conveyors: each 1000 x 560 mm maximum Dcjdpfeft Sccsx Akrsk -Work table: dimensions see photos -total Motor output: 1.9 kW -total Heating power: 8.9 kW -Dimension: 3070/1710/H2520 mm 838 kg -Accessories: incl. 8 foil rolls Ø290 x 540 mm 276 kg -Transport dimension: 1710/1070/H2520 mm / 1200/800/H700 mm -Total weight: 1114 kg + 500 kg foil

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 202-052, film width: 570 mm, type of input current: three-phase, pressure: 6 bar, total width: 25,800 mm, total length: 82,200 mm, total height: 22,800 mm, Thermoforming machine used,functional for PET,PS,PP. The machine is still in production mode, but is available immediately. Dcjdorh E Ibspfx Akrsk

Condition: used, Year of construction: 2025, operating hours: 8 h, total length: 2,000 mm, total width: 3,000 mm, total height: 3,000 mm, overall weight: 1,000 kg, type of input current: three-phase, power: 2.5 kW (3.40 HP), pressure: 3 bar, compressed air connection: 3 bar, input frequency: 50 Hz, Designed to form portions of minced meat by volume - 8 portions of 1 kg + up to 100 g and feed them into molds made on a thermoforming machine. - Productivity of the machine unit: a) up to 8 cycles / min for minced pork; b) up to 8-5.4 cycles / minute on average, depending on the content of beef fat in minced meat. Total electrical power consumption - 2.5 kW. included: 1.Filler 2.Tipper option 2 position empty product Height ~ 700mm and ~1900mm 3.Screw conveyor Dcjdov R Ttaopfx Akrok Multivac is not included - MULTIVAC R515 bottom film - 140 microns Top film - 60 microns. Pack size - 135 x 175mm, block size 4x2 - 375 x 585 mm Length x width x height 2000.0 × 3000.0 × 2000.0 This will make it easier to work in production. This will increase the production capacity of minced meat.

Condition: new, The Zerma ZCS shredder combines leading shredder and granulator technology in a single, compact unit. By developing the combination of shredder and granulator, ZERMA has successfully expanded its product portfolio. Through the interplay of the proven design and high torque of the single-shaft shredder with a highly efficient granulator, ZERMA is able to deliver a reliable and compact pre-shredding system. Dcsdeyr Tg Tjpfx Akrek The shredder and granulator are driven separately, providing better process control throughout. To further improve efficiency, the ZERMA Smart Drive System is used to constantly monitor the load and adjust the current accordingly, resulting in reduced power consumption. The ZERMA ZCS can be used in any application where consistent quality in shredding and granulating is required. Typical applications include, but are not limited to, the following: Injection molding Thermoforming Blow molding Recycling Extrusion Waste

Condition: used, Year of construction: 2014, two identical machines available, were in production until April 2025. Can be supplied with or without loading hoist for 200 litre tote bins. Machines were supplied new by Multivac UK and have come from a bakery where they were mixing fillings for pasties and sausage rolls. Dodpjwd Un Rsfx Akrsck

Condition: good (used), Year of construction: 2010, Ref. no.: 18637 Manufacturer: BUSCH Type: MM 1252 AV (15 Stück) Year of construction: 2010 Further information: Make | Model | Year | Capacity | Frequency | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2009 | 250/300 m³/h | 50/60 Hz | Busch Mink MM 1252 AV | 2010 | 250 m³/h | 50 Hz | BUSCH MINK MM 1252 AV VACUUM PUMPS A total of 15 units Busch Mink MM 1252 AV industrial vacuum pumps are available for sale. The pumps were removed from a running production line and are generally in clean and good cosmetic condition. These high-quality Busch MINK series pumps are widely used in plastics injection molding, central vacuum systems, packaging and automation applications. TECHNICAL SPECIFICATIONS • Manufacturer: Busch • Model: MINK MM 1252 AV • Technology: Dry Claw / Oil-Free Vacuum Technology • Capacity: 250 – 300 m³/h • Final Vacuum: 100 hPa (0.1 bar) Djdpfxjy Tlcws Akrsck • Frequency: 50/60 Hz • Year of Manufacture: 2009 / 2010 • Origin: Germany MAIN ADVANTAGES • Oil-free operating system • Low maintenance costs • Energy-efficient operation • Quiet and reliable performance • Suitable for continuous industrial operation • High Busch quality with worldwide service support APPLICATION AREAS • Plastic injection molding machines • Central vacuum systems • Packaging machines • Thermoforming systems • Automation and conveying systems • Industrial production facilities

Condition: new, Year of construction: 2026, Vacuum membrane press VPR-4000 is a universal press for woodworking and thermoforming. The VPR-4000 press is also tiltable and mobile. Applications: Veneering / Form gluing / Wrapping... Coating of various profiles (veneer, paper, plastic, etc.) Dcsdpoyr R Hwsfx Akrsk Wood bending: production of curved and laminated components Vacuum system: Working surface with vacuum channels for even negative pressure, even with large workpieces. Becker vacuum pump / oil-free / tank capacity 100 l Working area: 4000 x 1500 mm Pump power: 0.75 kW Vacuum pump flow rate: 40 m³/h Rubber membrane External dimensions: 4100 x 1650 x 1000 mm Weight: 400 kg Location: Ex stock 54634 Bitburg - Free loading on truck -

Year of construction: 2026, condition: new, The VPR-3500 vacuum membrane press is a universal press for woodworking and thermoforming. The VPR-3500 press is also swivelable and mobile. Possible applications: Veneering / Form bonding / Encasing… Coating of various profiles (veneer, paper, plastic…). Wood bending: Production of curved and laminated components. Dodpsd Ecc Tsfx Akrjck Vacuum system: Work surface with vacuum channels for uniform negative pressure, even with large workpieces. Becker vacuum pump / Oil-free / Tank capacity 100 l Work area: 3500x1500mm Pump power: 0.75 kW Vacuum pump flow rate: 40 m3/h Rubber membrane External dimensions: 3600 x 1650 x 1000 mm Weight: 400 kg Location: Available ex warehouse, 54634 Bitburg - Free loading -

Year of construction: 2026, condition: as good as new (ex-display), The VPR-3500 vacuum membrane press is a universal press for woodworking and thermoforming. The VPR-3500 press is also swivelable and mobile. Possible applications: Veneering / Form bonding / Encasing… Coating of various profiles (veneer, paper, plastic…). Wood bending: Production of curved and laminated components. Vacuum system: Work surface with vacuum channels for uniform negative pressure, even with large workpieces. Becker vacuum pump / Oil-free / Tank capacity 100 l Dedpfxjdvldaj Akrsck Work area: 3500x1500mm Pump power: 0.75 kW Vacuum pump flow rate: 40 m3/h Rubber membrane External dimensions: 3600 x 1650 x 1000 mm Weight: 400 kg Location: Available ex warehouse, 54634 Bitburg - Free loading -

Condition: used, Manufacturer: Treif / Variovac Year: 2018 Condition: Used Stock Number: 3346J / 3347J Line is consisting of: Treif slicer Type: Divider 660+ Serial number: 660002.21888.133706 Year of construction: 2018 Cuts: max 2640 RPM Slice thickness: 0.5 - 25 mm Dcedpfx Akjyz Sc Tjrek Stacking height: up to 100 mm Product size: max 280 x 160 mm Product length: max 850 mm Belt width: 385 mm Compressed air: min 6 Bar Power: 3 x 400V, 50Hz, 7.5kW Dimensions: 1900 x 1050 x 2150 mm Weight: 850 kg Including knife holder and tool trolley Treif / Wipotec check weigher Belt width: 345 mm Weighing platform: 400 mm Dimensions: 400 x 1100 x 1050 mm Treif transversal sorter Belt width: 420 mm Dimensions: 700 x 1050 x 1050 mm Treif sorting conveyor Belt width: 420 mm Dimensions: 2300 x 1150 x 1250 mm Treif knife sharpener Type: HS-380 Serial number: 243003.61973.105787 Year of construction: 2009 Dimensions: 500 x 900 x 1650 mm Weight: 90 kg Variovac thermoformer Type: Optimus Serial number: 420.OL0707 Year of construction: 2018 Film: rigid film Film width: 420 mm Index: 280 mm Dye: 2 pc. of 232 x 175 mm Vacuum pump: Busch, RA0100F Compressed air: min 6 Bar Power: 3 x 400V, 50Hz, 15kW Dimensions: 4200 x 1100 x 1850 mm Weight: 1170 kg

Condition: like new (used), Year of construction: 2016, pressing force: 400 t, passage width 2500 mm stroke 900 mm Total power requirement 62 kW machine weight approx. 27,5 t dimensions L x W x H approx. 3950 x 2200 x 4850 mm retraction force 40 t Main cylinder 2 pieces column diameter 220 mm installation height 1300 mm table size 2500 x 1600 mm ram size 3100 x 16000 mm table height above floor approx. 900 mm forward speed 200 mm/sec return speed 200 mm/sec working speed 5 - 15 mm/sec oil tank 1500 l oil quantity 1200 l pressure control adjustable from up to 50 - 400 t thermoforming cushion 1400 x 800 mm thermoforming unit capacity 30 - 60 t deep drawing cushion stroke 250 mm thermoforming cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low maintenance and reliable piston rod with induction hardening and chrome plating T-slots according to customer requirements, if not specified 22mm according to DIN CE certificate manufactured according to EU standards operating instructions, technical documentation, documentation in German language engineering steel LCG ASTM A36 T-slots in table and ram according to DIN 650-22 Travel control adjustable via monitor Light sensors front + rear: Sick 1300mm Dcodsin Et Nepfx Akrjk Hydraulic components Bosch Rexroth Monitor Siemens 12 inch Electrical control box for wall mounting Interior of the press illuminated with LEDs Hydraulic block monitored by safety PLC Energy control system: Reduction of the idle consumption of the pump to approx. 2 kw Remote control for remote maintenance Two-hand operation on movable stand Further information: Pressure build-up up to 400 T within max. 4 seconds after closing the die. Left side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Right side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Operation of the press can be manual, semi-automatic or fully automatic

Year of construction: 2025, condition: new, functionality: fully functional, Vacuum Press / Membrane Press “Columbus Pioneer” – Available for Immediate Delivery! (Modular system with various configurations and usable surfaces) – now including a digital Master Manual and AI support on tablet for a safe start and reproducible results. The COLUMBUS Pioneer is a professional vacuum and membrane press for applications such as vacuum form-bonding, veneering, coating, and laminating of flat or curved workpieces. Thanks to its modular concept, the machine can be adapted to different requirements and is available in various sizes and configurations. Technical Features: • Quick-change membrane system Dedpfx Aozqtnyskrsck • Gas pressure dampers for comfortable lid opening • Highly elastic natural rubber membrane (up to +130 °C) • Durable phenolic resin worktop, 15-ply bonded (up to +120 °C) • BECKER high-performance vacuum pump, 40 m³/h (up to 900 mbar / 9 t/m²) • Optional automatic shut-off upon reaching set pressure • Pressure regulation 400–900 mbar with analogue vacuum gauge • Connection for external vacuum bag • Base feet with smooth-running swivel castors • FESTO pneumatic components and SIEMENS electrical systems Available Working Areas: 3,050 mm x 1,350 mm (Pioneer L) 4,050 mm x 1,350 mm (Pioneer XL) 4,050 mm x 1,700 mm (Pioneer XXL) Designs/Modular Configuration: The COLUMBUS Pioneer features a modular design and is available in BASIC (classic vacuum pressing such as veneering, coating, and form-bonding), HEAT (heating and thermoforming of plastics and solid surface materials), and VERTICAL (processing of taller workpieces and convenient loading/unloading via vertical opening) versions, which can be combined or retrofitted depending on requirements. COLUMBUS machines are designed for long-term operation and are manufactured using high-quality industrial components. The robust construction, proven components from renowned manufacturers, and precision workmanship ensure high durability and reliable performance. COLUMBUS offers a lifetime warranty on the machine frame (excluding wearing parts). Every COLUMBUS Pioneer is part of the COLUMBUS 360° System. This includes the digital Master Manual with extensive practical vacuum technology knowledge and Master GPT – an artificial intelligence for all questions regarding the machine, applications, materials, and optimal process parameters. The system assists users with setup, operation, and process optimization, and comes with a tablet for immediate use.

Year of construction: 2026, condition: new, COLUMBUS PIONEER – The Modular Professional Vacuum Press for Flexible Joineries More possibilities. More applications. More future security. The COLUMBUS Pioneer is not just a vacuum press, but a well-designed complete system for modern joineries and woodworking businesses. Ideal for: * Veneering * Form bending * Laminating * Thermoforming Djdpfx Aszqtn Tokrsck * Solid surface materials * Curved and complex workpieces Why choose COLUMBUS? Many businesses discover completely new uses and additional orders within a short time because the Pioneer makes jobs economical that were previously turned down. Your advantages: * Modular system – grows with your business * Lifetime warranty on the machine structure * Heavy-duty industrial construction for decades of use * Columbus 360° included: Practical expertise, master manual, and AI support for maximum application safety * Premium components from BECKER, FESTO and SIEMENS * Simple operation and reproducible results Equipment: * Quick-change membrane system * Highly elastic natural rubber membrane up to +130°C * Pressure regulation from 400–900 mbar * Connection for external vacuum bag * Sturdy phenolic resin worktop * Smooth-running swivel castors Available sizes: * L: 3,050 x 1,350 mm * XL: 4,050 x 1,350 mm * XXL: 4,050 x 1,700 mm COLUMBUS has been developing vacuum technology for professional users for almost 50 years. Viewing and personal consultation available by appointment.

Year of construction: 2026, condition: new, functionality: fully functional, Vacuum Press / Membrane Press “Columbus Pioneer” – Available for Immediate Delivery! (Modular system with various configurations and usable surfaces) – now including a digital Master Manual and AI support on tablet for a safe start and reproducible results. The COLUMBUS Pioneer is a professional vacuum and membrane press for applications such as vacuum form-bonding, veneering, coating, and laminating of flat or curved workpieces. Thanks to its modular concept, the machine can be adapted to different requirements and is available in various sizes and configurations. Technical Features: • Quick-change membrane system • Gas pressure dampers for comfortable lid opening • Highly elastic natural rubber membrane (up to +130 °C) • Durable phenolic resin worktop, 15-ply bonded (up to +120 °C) • BECKER high-performance vacuum pump, 40 m³/h (up to 900 mbar / 9 t/m²) • Optional automatic shut-off upon reaching set pressure • Pressure regulation 400–900 mbar with analogue vacuum gauge • Connection for external vacuum bag • Base feet with smooth-running swivel castors • FESTO pneumatic components and SIEMENS electrical systems Available Working Areas: 3,050 mm x 1,350 mm (Pioneer L) 4,050 mm x 1,350 mm (Pioneer XL) 4,050 mm x 1,700 mm (Pioneer XXL) Designs/Modular Configuration: Dcedpfjzqtmcox Akrok The COLUMBUS Pioneer features a modular design and is available in BASIC (classic vacuum pressing such as veneering, coating, and form-bonding), HEAT (heating and thermoforming of plastics and solid surface materials), and VERTICAL (processing of taller workpieces and convenient loading/unloading via vertical opening) versions, which can be combined or retrofitted depending on requirements. COLUMBUS machines are designed for long-term operation and are manufactured using high-quality industrial components. The robust construction, proven components from renowned manufacturers, and precision workmanship ensure high durability and reliable performance. COLUMBUS offers a lifetime warranty on the machine frame (excluding wearing parts). Every COLUMBUS Pioneer is part of the COLUMBUS 360° System. This includes the digital Master Manual with extensive practical vacuum technology knowledge and Master GPT – an artificial intelligence for all questions regarding the machine, applications, materials, and optimal process parameters. The system assists users with setup, operation, and process optimization, and comes with a tablet for immediate use.

Year of construction: 2026, condition: new, functionality: fully functional, COLUMBUS PIONEER – Modular Vacuum & Membrane Press with Lifetime Guarantee The COLUMBUS Pioneer is the professional solution for joineries and woodworking shops looking to produce flexibly and invest securely for the long term. Dedezqtl Sjpfx Akrsck Ideal for: * Veneering * Form gluing * Laminating * Thermoforming * Solid surface materials * Curved workpieces Your benefits: * Modular system – can be expanded at any time * Lifetime guarantee on the machine frame * Robust industrial construction * Columbus 360° included: Master Manual + AI support * Premium components from BECKER, FESTO, and SIEMENS * Simple operation and high reliability Features: * Quick-change membrane system * Natural rubber membrane rated up to +130 °C * Adjustable vacuum pressure from 400–900 mbar * Connection for external vacuum bag * Sturdy phenolic resin work surface * Smooth-running swivel casters Available sizes: * L: 3,050 x 1,350 mm * XL: 4,050 x 1,350 mm * XXL: 4,050 x 1,700 mm COLUMBUS has been developing vacuum technology for professional users for 50 years. Viewing and consultation available by appointment.

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: AK2-SCBS201, input current: 230 A, For sale is a used ELS labeler/labeling station with a conveyor belt. The machine was acquired by us after we installed our own labeling system on our thermoforming packaging machine. The labeler was subsequently completely overhauled and tested for functionality. Djdpszkucfsfx Akrsck The system is mounted on a sturdy stainless steel/aluminum frame and features an integrated conveyor belt. The photos show labeling heads, roll holder, control panels, sensors, and mechanical adjustment options for adapting to different products or packaging. Data / Features: Manufacturer: ELS Type / Designation according to nameplate: AK2-SCBS201 Machine no. according to nameplate: 16615 / 2024 Labeling station with conveyor belt Height and position adjustment Stainless steel / aluminum construction Control panels on the labeling head Sensors included Completely overhauled Function tested Condition: used, ready for operation The machine is suitable for use in packaging lines, e.g., for labeling packaged products, trays, boxes, or similar items. Before use, the system should be adjusted to the specific product and adapted to the corresponding label format. Note: Technical data such as label width, label length, belt width, connection values, and exact dimensions can be requested separately if needed or checked on-site. Inspection and testing possible by appointment. Errors and prior sale excepted.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, controller model: Simatic S7-1500, total length: 8,480 mm, film width: 460 mm, roll diameter: 400 mm, machine/vehicle number: 20-042, production capacity: 10 unit/h, No minimum price – guaranteed sale to the highest bidder! The new price of the thermoforming vacuum packaging machine was EUR 255,000 plus VAT! TECHNICAL DETAILS Film Bottom film width: 460 mm Bottom film: Soft film PA/PE, max. 350 µm Top film width: 455 mm Top film: Soft film PA/PE, max. 100 µm Film roll diameter, top film, max.: 400 mm Film roll diameter, bottom film, max.: 400 mm Performance and format Draw length: 300 mm Thermoforming depth, max.: 190 mm Adjustable output: 7 - 10 cycles/min MACHINE DETAILS Control system Touch panel: 12" Controller: Simatic S7-1500 Operating language: German Dedjzkgbyepfx Akrock Electrical and media connections Mains voltage: 400 V Mains frequency: 50 Hz Compressed air consumption: approx. 600 - 1,250 l/min Compressed air connection: 3/4" - DN 19 Cooling water consumption: approx. 80 - 150 l/h Water connection: 1/2" - DN 13 Machine dimensions Tool spacing: approx. 3,900 mm Free infeed path: approx. 1,997 mm Machine length: approx. 8,480 mm Outfeed belt, usable length: approx. 550 mm Machine height: approx. 1,965 mm EQUIPMENT Modular construction made of stainless steel Standard film rolls with a film core diameter of 3" / 76 mm Kne lever system for the forming and sealing station Memory-programmable controller with a swiveling operating terminal Fumigation system SWZ with a stainless steel tank and a storage volume of 5 liters Safety devices with magnetic and light curtain protection Automatic lubrication system for the film transport chain Outfeed belt Intralox Blue 950 mm, usable length 550 mm Format parts for several packaging and forming sizes

Condition: new, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, loading space length: 3,857 mm, loading space width: 1,789 mm, loading space height: 1,755 mm, loading space volume: 12 m³, color: white, number of seats: 9, total length: 6,315 mm, total width: 2,466 mm, total height: 2,500 mm, Equipment: air conditioning, Renault Master, 9 seats with approved wheelchair space 170hp, 6-speed manual transmission Vision Package (FFGL0 PRAHL) * Fog lights * Light assistant SAFETY – ADAS – * eMRD2 approval criteria system * RCall system maintenance system * Tire pressure monitoring system * Full-size spare wheel * Traffic sign recognition system * Standard tires * “Wide View” interior mirror * Radio antenna and standard eCall * ABS system * Central locking * Rain and dusk sensor * Driver fatigue alert system * Driver airbag * Emergency braking system * Side outline marker lights * LED headlights * Wireless smartphone charger COMFORT Dcjdpfezn E Rnex Akrsk * 12V sockets in cab and cargo area * Double passenger bench with “mobile office” and storage locker * Manual air conditioning * Sliding glove compartment * Analog driver gauges with 3.5'' TFT monochrome display * Electrically operated windows * Cab lighting * Electrically adjustable, heated side mirrors, manual folding * Engine bay cover from factory Park Package (ITP15 RRCAM) * PDC sensors * Reversing camera Other Options * Suspension driver’s seat * openR link 10'' multimedia system with built-in Google services (navigation) * Heated windscreen * Partially painted front bumper * Fog lamps * Rear doors opening to 180 degrees Conversion: * Two seating rows (3 single seats each) with headrests, adjustable backrests, and 3-point inertia seatbelts. Outboard seat by the sliding door is airline-mounted. * Full aircraft floor system with non-slip surface * Tinted fixed windows in 2nd and 3rd rows * Tinted fixed windows in rear doors * Side panels and B-pillars lined with thermoformed ABS * Full headliner in passenger compartment * Plastic wheel arch covers in cargo area * Certified installation for two wheelchairs * Transport after conversion to selected dealer station * Type approval for transport of a person with disabilities OFFERED / OPTIONAL EQUIPMENT DESCRIPTION * Enhanced air conditioning for 2nd and 3rd rows – cooling only, weight 11kg – Price: €2,750 * Folding armrests, 4 total – Price: €380 * Webasto AirTop 2000 auxiliary heater (2kW) in passenger compartment, weight 5kg – Price: €1,300 * Ramps and 3-point seatbelt for wheelchair restraint – Price: €1,120 * Platform and 3-point seatbelt for wheelchair restraint – Price: €1,705 * 3-point seatbelt for wheelchair restraint – Price: €695 * Electrically operated step at sliding door – Price: €940 Our special service for you: * Service record maintained by authorized partner and master workshop * Winter tires available at extra cost * Extended warranty insurance up to max. 36 months available at extra cost * We are happy to take your used vehicle in part exchange at a fair price! * Financing available from 6.99%, with or without down payment, up to max. 96 months (subject to credit approval) * TÜV / DEKRA vehicle and emissions inspection * EU net sales possible – intra-community delivery with valid VAT ID number * Non-EU (worldwide) export possible incl. export declaration, supplier’s declaration * Nationwide delivery within Germany available at extra cost! * Registration service for customs and temporary license plates incl. insurance and registration fees The information provided online is a non-binding description.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 500 kg, See also homepage: bdtronic.com/de-de/heissnietanlagen/vollautomatisch-heissnieten/ Dcsdpsy Nzhbefx Akrek Furthermore, there are other similar machines. Currently physically located at the subsidiary plant.