Used Mvd S 40 for sale (78,720)

Condition: new, Schunk PWG 40-S 302611 angle gripper, unused in opened original packaging, 100% functional, scope of delivery as per photos. Blodoy Nr Acopfx Al Aon

Condition: excellent (used), functionality: fully functional, empty load weight: 5,630 kg, maximum load weight: 27,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2021, total length: 12,610 mm, total width: 2,500 mm, total height: 1,150 mm, color: black, trailer brake: trailer braked, Year of construction: 2021, Equipment: ABS, Göbel / System Trailer Interchangeable Chassis COS27 Rare special equipment! For sale is an exceptionally equipped Göbel 3-axle interchangeable chassis / container chassis in very good condition. The trailers have been used very little and have been well maintained. Due to the extensive special equipment, this is not a standard container chassis, but a technically very interesting and rare configuration. Of particular note is the combination of WABCO OptiLoad and a BPW trailing steering axle with Active Reverse Control. The first axle is designed as a lift axle with WABCO OptiLoad. The system ensures a permanently optimized fifth wheel load and load distribution via automatic air spring relief. The rear BPW steering axle steers in normal driving operation and also provides active support when reversing. The steering can be additionally influenced via the existing remote control. Especially when maneuvering and in confined spaces, this design offers a significant advantage over a conventional container chassis! Bjdpfx Aloz D Umue Aoln The chassis is designed for various container configurations and features a twist-lock system and a gooseneck design. Equipment / special features: 3-axle interchangeable chassis / container chassis WABCO OptiLoad on the first axle first axle as a lift axle BPW trailing steering axle BPW Active Reverse Control steers when reversing remote control for the steering system WABCO EBS braking system WABCO SmartBoard / TIM with ECAS operation gooseneck design twist-lock container locking accommodation of various container sizes possible 2 stainless steel toolboxes with high-gloss polished front flap, approx. 1,000 x 500 x 500 mm ALCOA Dura-Bright aluminum rims 11.75 x 22.5 inches tires 385/55 R22.5 with M+S and snowflake symbol DUO-MATIC air connection 15-pole electrical connection complete lighting system in LED design additional reversing lights high-quality KTL coating additional powder coating in RAL 9005 deep black The original new price for this extensive special configuration was over 50,000 € net. The main inspection (HU) will be renewed before delivery. Several interchangeable chassis are available. Two largely identically equipped interchangeable chassis are available in this design. Available designs or container accommodations: 10 ft 20 ft 30 ft 40 ft In addition, another interchangeable chassis for a 20-foot container is available. If desired, a suitable design / material container is also available. Further information on the individual chassis, container dimensions and available combinations is available upon request. A viewing is only possible after prior arrangement. Image note: AI-assisted adjustment of background, vegetation and lighting mood. Vehicle unchanged.

Condition: like new (used), Year of construction: 2006, GLASS VAS 40 Bledpfxju Ivauj Al Aon ID.NO. 2853 GLASS VAS 40 process machine for mixing & emulsions. Year mod 2006 built-in steam generator to be able to process the products under heat and pressure. Very nice machine that has previously been at a charcuterie school. Dimensions 260 x 160 cm Height 215 cm.

Condition: used, Year of construction: 1998, x-travel 1.020 mm y-travel 510 mm z-travel 510 mm control MSC 501 Fanuc table surface area (APC) 1.200 x 480 mm max. table load (APC) 550 kg turning speed range - milling 10.000 U/min power capacity - milling spindle 22 / 18,5 kW tool taper BT 40 number of toolpositions 30 pos. tool taper BT 40 Bledpfx Aey Apcyjl Asn max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg rapid traverse 32 m/min feed 1 ~ 16.000 mm/min Tipp feed 0 ~ 1.260 mm/min spindle bearing diameter 85 mm total power requirement 59,5 kVA weight of the machine ca. 6,9 t dimensions of the machine ca. 3,9 x 2,7 x 2,9 m CNC - Machining Center - Vertical MORI SEIKI - SV 500 B/40 - Clamping devices are NOT included in the scope of delivery

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 25156F, Mobile hydraulic tilting lift Wortmann HKV-S | DIN + 2x 240 liters | 1,400 mm For sale: mobile hydraulic tilting lift from Wortmann Milieutechniek, type HKV-S. This tilting lift is equipped with multiple attachments, making it versatile for use with various waste containers. The machine has a DIN attachment for roll-on/roll-off containers and also an attachment that allows two 240-liter containers to be tilted simultaneously. With a pivot point height of approximately 1,400 mm, the tilter is very suitable for emptying containers into, among other things, compaction containers, waste compactors, bins, and other collection systems. The complete installation is mounted on swivel casters, making it easy to move and use in different locations within a company. The moving parts are fitted with safety guards on both sides. Technical specifications: Brand: Wortmann Milieutechniek Type: HKV-S Year of manufacture/overhaul according to nameplate: 2018 Power supply: 400 V Motor power: 3.0 kW Fuse rating: 16 A Pivot point height: approx. 1,400 mm Own weight: approx. 750 kg Max. load weight: 650 kg Bedpfjz Ern Ejx Al Asln Color: RAL 7016 Hydraulic drive Mobile design Container attachments: DIN attachment for roll-on/roll-off containers Attachment for 2 x 240-liter containers Hydraulic lifting and tilting system A reliable and flexible solution for companies that want to empty various waste containers at a single, fixed tilting height. The machine is in used condition and can be inspected and tested by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: tilting lift, container tilter, waste container tilter, DIN tilter, 240-liter tilter, 2x 240 liters, roll-on/roll-off container tilter, hydraulic tilter, mobile tilting lift, container lift, waste processing, compaction container, Wortmann HKV.

Condition: used, Metal separator S+S MES 40 diameter 35 mm Blodpfx Alemkig Uj Aen price: 1.250 € contact: Mr. Rainer Eckerle

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, load capacity: 6,000 kg, fuel type: diesel, motor manufacturer: Perkins, overall weight: 9,400 kg, Equipment: cabin, - Water-cooled-engine and starts well - manually operated directional control valves for up, down, balance and extend the fork and retract it - brakes work Bledpfxozzw Rao Al Aen

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, overall weight: 22,400 kg, total length: 24,000 mm, total width: 3,500 mm, load capacity: 40 kg, power: 40 kW (54.38 HP), Equipment: documentation/manual, ABUS bridge crane, 40 t + 16 t auxiliary winch. Year of manufacture: Crane and main winch: 1997. Auxiliary winch: 2003. The crane was installed in this facility in 2003. Span: 21,100 mm. Bjdpfxozzagqo Al Aoln ABUS wire rope winches. Radio remote control. Power supply: 3 x 400 V. Price excludes dismantling. Dismantling and transport can be arranged.

Condition: used, Year of construction: 1998, Surface grinding machine Manufacturer: Geibel + Hotz Type: FS 40 AC Year of manufacture: 1998 Bjdpfxewcym As Al Asln Table length: 400 mm Table width: 200 mm Maximum workpiece weight on the table: 150 kg Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Machine weight approx.: 1,050 kg Machine dimensions L x W x H: 1,800 x 1,200 x 2,250 mm 28926

Condition: used, Year of construction: 2025, 40-foot High Cube container with side door and 2 window openings! ----* Year of manufacture: 2025 Bljdez E Uakjpfx Al Aon * With side door and 2 window openings * Like new, used only once * Tare weight: approx. 4,080 KG * Gross weight: 30,480 KG * Payload: 26,400 KG * Small crack due to loading. See photos. * Price: 4,900 Euro, net + 19% VAT. ----For further questions, please call: Erik Kortum: WhatsApp ?All information is subject to change without notice and without guarantee. Errors and prior sale are reserved.?

Year of construction: 2018, condition: excellent (used), ESPEC PL-4J Climate Testing Chamber / Temperature Testing Chamber Manufacturer: ESPEC Corp. Type: PL-4J Equipment Type: Climate Testing Chamber / Temperature Testing Chamber Year of Manufacture: 2018 Bledpfx Aszntunel Ajn For sale is a used temperature and climate testing chamber from the manufacturer ESPEC. The device is suitable for temperature and climate tests, environmental simulations, material tests, quality assurance, as well as development and stress tests. Technical Data Manufacturer: ESPEC Corp. Type: PL-4J Temperature Range: -40 °C to +100 °C Humidity Range: 10 to 98 % RH Test Chamber Volume: approx. 800 liters Heating Rate: approx. 3 K/min Cooling Rate: approx. 2 K/min Internal Dimensions (W × H × D): approx. 1000 × 1000 × 800 mm External Dimensions (W × H × D): approx. 1410 × 1970 × 1273 mm Power Connection: AC 400 V / 3~ / 50 Hz Max. Power Consumption: 21 A Weight: approx. 610 kg Refrigerant: R452A Refrigerant Quantity: 1.16 kg + 0.36 kg Equipment Touchscreen control Temperature and humidity control Program control Stainless steel interior Viewing window Interior lighting 100-mm cable gland Water-cooled condenser Castors for easy transport Application Areas Temperature testing Climate testing Environmental simulation Material testing Quality assurance Electronics testing Research and development Endurance and aging tests Workshop testing The climate chamber has been workshop tested. Functional testing performed. Humidity system repaired. Documented test run successfully completed. Scope of Delivery ESPEC PL-4J Climate Testing Chamber Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age and use. Note Collection or shipping by freight forwarder is possible by arrangement. Subject to changes, errors and prior sale.

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm feed 0.10 + 0.20 mm/U T-slots 2 x 14 x 224 mm distance spindle /table 117 / 701 mm engine output 1.45 / 1.90 kW weight 285 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint, signal white RAL 9003 PANTONE 7545c, black including special accessories: Bsdpfsxab Rhex Al Ajln - 25. Coolant system B.

Condition: used, mileage: 500 km, power: 294 kW (399.73 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (available by phone). Iveco S-Way AD190S40/P box truck with tail lift. Bsdpfx Aoyfqprel Aeln Steel rims, standard reverse gears, speed limiter 90 km/h, manually operated cab tilting mechanism, halogen headlights, black decorative film on doors, driver's cab rear wall without window, fog lights, front underrun protection for chassis with a total weight greater than 7.490 kg, first aid kit, plastic bumper, black driver's cab components, electrically adjustable and heated exterior mirrors, standard driver's cab roof insulation, white flat roof, electronic immobilizer and 2nd vehicle key, digital EG control unit 4.1, static co-driver seat, air suspension on rear axle, Hi-TroniX 12TX 1810 TD, chocks, 2 pieces, batteries horizontally mounted on the frame, 2160 Watt generator (24 Volt x 90 Ampere). Recommended for tail lift operation, rear shock absorbers, vertical dry air filter, 1-cylinder 352 ccm air compressor, gray chassis frame, APU pressure release into the atmosphere, standard total vehicle braking system, steel air reservoirs, number depending on suspension version and trailer version, front stabilizer bar, exhaust tailpipe, to the left, emission standard EURO VI E, rear frame overhang, 2793 mm, omission of rear underrun protection, AdBlue tank, 50 liters, fuel pre-filter with separator, heated, standard transmission mode, optimized aerodynamics on the A-pillar, preparation for toll system (OBU), includes antenna and wiring harness on the dashboard without a receiver unit, ECO-Switch: switches from power mode to eco mode to optimize the total cost of ownership (TCO) through fuel-optimized engine and transmission tuning, VDI interface (Vehicle-Data-Interface) for telematics services (FMS), version 4.0, transmission software ECO-Roll (coast function), driving style analysis (DSE), adaptive cruise control (ACC), lane departure warning system (LDWS), warning triangle, design and dimensions according to ECE-27 directive, hazard warning lights, electronic stability program (ESP), advanced emergency braking system (AEBS), DRIVE T. 315/70R22.5, transparent sun visor, installed on the outside of the driver's cab roof, with curtains on the bed, signal horn behind the bumper (compressed air), ashtray in the center console, reinforced parabolic spring on the front axle, electrical preparation for tail lift operation according to VEHH standard, weight variant front axle 8,000 kg / rear axle 11,500 kg (technically possible 13,000 kg), reinforced torsion bar stabilizer rear axle D 60mm, battery disconnect switch in the driver's cab, electrically operated, batteries 225 Ah, without jack, battery charging socket, terminals, rear axle ratio: i 3.08, trailer socket for 24 Volt operation, 15-pin, trailer coupling, manufacturer Rockinger, trailer version for trailer operation with continuous braking system, fuel tank 390 liters, aluminum, rear cross member, D-value: 130 kN, trailer coupling, 40 mm, 130 kN, edge protection frame end, electrical connection for body on the left side of the frame, side marker lights, warning sound for reversing, switchable, axle load indicator in the instrument cluster, hill start assist, for comfortable starting on inclines, LED rear lights, tire manufacturer Fa. GOODYEAR tires 315/70 R22.5 KMAX S GEN-2 (3PMSF), KMAX D GEN-2, operating and maintenance manual printed, new box truck with tail lift according to AN 200028995 + optional side door on the right, ...

Condition: used, mileage: 497,170 km, power: 353 kW (479.95 HP), first registration: 09/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, S-WAY AS440S48T/P German vehicle from first owner ---- * Assistance Systems Adaptive cruise control, lane departure warning, hill start assist, speed limiter: 90 km/h * Exterior Fifth wheel: Jost, roof spoiler, electrically adjustable and heated exterior mirrors, axle load indicator, 1x 15-pin connector, tilting roof, suspended cab * Safety Intarder, electronic stability program (ESP), immobilizer, front underrun protection, emergency braking assistant * Interior Multifunction leather steering wheel, sun visor * Comfort Comfort seats driver/co-driver: lumbar support, air-suspended driver and co-driver seats, height-adjustable driver seat, co-driver armrest, heated seats driver/co-driver, lumbar support for driver/co-driver * Further Features ECOSWITCH, VDI interface for telematics systems, Eco Smart generator, OBU preparation, ECO-Fleet, driving style analysis (DSE) and driver fatigue detection (DAS), ECO-ROLL, HI-MATIC * Dimensions and Weights Bjdpfoyygbnox Al Asln Wheelbase: 3,790 mm Permissible total weight: 18,000 kg Payload: 11,194 kg Max. axle loads: 7,500 / 11,500 kg Fuel tank: 710 / 480 l AdBlue: 135 l Tyres: 315/70R22.5 We are happy to prepare a personalized financing or leasing offer for you! Contact us! Sale only to commercial customers or for export Subject to errors and prior sale.

Condition: excellent (used), Manual trolley, trolley, crane trolley, trolley drive, crane trolley, trolley, girder trolley, monorail trolley, running trolley, trolley, trolley, monorail trolley, pantograph trolley, cable trolley Blodpezht Diofx Al Aon -Manufacturer: Vahle, pantograph wagon -Type: SWN 4/40 HS -Item No.: Dimensions: see photos -Number: 5x pantograph cars available - Price: per piece -Dimensions: 200/55/H130 mm -Weight: 0.5 kg/pc.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, clamping jaws, segment jaws Blsdpfx Alezhuw Dj Aen -Manufacturer: Schunk, soft attachment jaws, 4 sets = 12 pieces -Type: SWB-200 -Dimensions: see photo technical drawing -Submission/Price: complete -Transport dimensions: 240/180/H60 mm -Weight: 16.3 kg

Condition: ready for operation (used), For sale here is a main spindle from a Fooke Endura milling machine; it is in working condition. Bljdpozhh Ipefx Al Aen

Condition: used, machine/vehicle number: 1680, Year of construction: 2017, operating hours: 2,690 h, load capacity: 4,000 kg, lifting height: 18,000 mm, overall weight: 13,200 kg, enginetype: Diesel, manufacturer: Merlo Bodpszca Dtsfx Al Aoln

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Claimant: Kläger VBS 405 S Vertical Bandsaw / Metal Bandsaw Manufacturer: Kläger Type: VBS 405 S Condition: used, very good Blsdpszmh Ugefx Al Asn Year of manufacture: 2006 Cutting width: 400 Table tilt right/left: 45°/15° Table size: 607 x 607 mm Saw band width: 3-20 mm Saw band length: 3300-3400 mm Band speed: 15 – 300 m/min Length: 1120 mm Width: 740 mm Height: 1930 mm Weight: 510 kg – Ideal saw band welding device – Original documentation – Machine feet

Condition: excellent (used), Binder MK 115 E3.1 Temperature Cycling Chamber Device Data Manufacturer: Binder Type: MK 115 E3.1 Bedpjy H Hvlofx Al Aeln Article Number: 9020-0175 Design: Temperature Cycling Chamber Refrigerant: R404A (1.20 kg) Description Used temperature cycling chamber from Binder. Suitable for dynamic temperature tests and rapid temperature changes. Used in material testing, research, and quality assurance. Technology APT.line™ preheating chamber technology Natural simulation of temperature profiles High precision and reproducibility Features MCS controller with program memory Adjustable ramp functions Temperature selector limiter Class 2 (DIN 12880) Heated viewing window with interior lighting Ethernet interface Feedthrough Ø 50 mm (left) Stainless steel interior with insert 4 rollers (2 lockable) Technical Data Temperature range: -40 °C to +180 °C Fast temperature changes (temperature cycling mode) Interior volume: 115 liters Dimensions External (W x H x D): approx. 980 x 1725 x 865 mm Internal (W x H x D): approx. 600 x 480 x 400 mm Electrical Data 400 V / 50 Hz Power: 3.5 kW Current: 11.0 A Pressure Data Max. operating pressure: 29 bar Weight approx. 260 kg Condition: Used. Optical and technical condition, see pictures. Scope of delivery: Binder MK 115 temperature cycling chamber Insert / interior fittings Inspection possible by arrangement. Loading and transport can be arranged upon request. Subject to change and prior sale. If you have any questions, please contact us.

Condition: excellent (used), We are offering a Weiss temperature test chamber for sale. Weiss Temperature Test Chamber with S!MCON / 32-controller, water-cooled Control Unit: "Touchpanel" All control and operation commands can be initiated by simply touching the function symbols on the "Touchpanel" control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to provide adequate ventilation for the machine section. Cable Ports Cable ports are installed on both the right and left sides of the test chamber. These allow measurement cables and test devices to be routed into the test space. Ports included as standard: - R1: NW 125 mm - L1: NW 50 mm (The refrigerant has been converted to R-452A) Test Chamber Volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature Test Data: Bsdsziyb Repfx Al Ajln Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Maximum thermal compensation: 2500 W Operating Data: - Test chamber lighting: Halogen bulb 2 x 24V, 50W - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated current: 15 A; Rated power: 7.8 kW - Fuse (on-site): 16 A slow-blow - Sound pressure level: approx. 58 dB(A) (measured 1 m in front, 1 m height) - Refrigerant: R-452A - Weight: 620 kg Type: WT3-600/40 Important information for your safety as a buyer! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: excellent (used), Here, we offer a Weiss temperature chamber. Weiss temperature test chamber with S!MCON / 32 control, air-cooled (Refrigerant converted to R-452A) Control panel »Touchpanel« On the »Touchpanel« control panel, all control and operating commands can be triggered by simply touching the function symbols. Adjustable feet To compensate for uneven floors and to ensure sufficient ventilation of the machine part, the test chamber is equipped with adjustable feet. Feedthroughs Bljdpfszga Huex Al Ajn The test chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and test equipment to be placed in the test chamber. Feedthrough installed as standard R1: 125 mm L1: 50 mm Test chamber volume: approx. 600 liters External dimensions with hinges and door lock Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, Width 1000 mm, Depth 1660 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 2500 W Data for operation: Test chamber lighting: halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power 7.8 kW Fuse, to be provided by the customer: 16 A, slow-blow Sound pressure level approx. measured at a distance of 1m from the front, 1m height: 61 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: new, OTT-JAKOB IS-40-B1-1.0 built-in clamp, unused in opened original packaging, 100% functional, delivery as per photos Bledpex Et Swefx Al Ajn

Condition: used, first registration: 05/2018, empty load weight: 3,840 kg, 40-foot container | very good condition | age unfortunately unknown | WITHOUT PLATFORM!!! | Subject to errors, input mistakes, and prior sale. Bljdoxqqd Sepfx Al Aen

Condition: excellent (used), functionality: fully functional, Werner & Pfleiderer Twin-Screw Extruder ZSK 40 – Excellent Condition For sale is a Werner & Pfleiderer (WP) ZSK 40 co-rotating twin-screw extruder. Technical Specifications: • Machine Type: ZSK 40 • Screw Diameter: 40 mm • Screw Length: 7 barrels × 4 D → approx. 28 L/D • Main Drive: 34.5 kW Bjdpfx Aleycuuyo Asln • Motor Speed: 1,800 rpm • Screw Speed: 40 – 400 rpm • Max. Torque per Screw Shaft: 325 Nm • Heating: Electric, connected load approx. 17 kW • Cooling: Water chiller unit • Temperature Control Zones: 6 zones • Barrel Temperature Sensors: 6 • Material Temperature Sensor: 1 • Material Pressure Sensor: 1 Barrel Configuration: • Feed barrel with liquid injection port • Open barrel with insert and 2 liquid injection ports • Multiple closed barrels with ports for liquid injection or measurement points • Degassing barrel General Features: • Co-rotating, closely intermeshing (self-cleaning) screws • High mixing and dispersing performance thanks to modular mixing and kneading elements • Modular system for screws and barrels • Drive section and process section mounted on stable base frame Fields of Application: • Plastics compounding • Masterbatch • Additive and filler incorporation • Laboratory and pilot plant use • Formulation and product development Condition & Runtime: According to the operating hour counter, the machine has run for less than one year and is therefore in excellent, nearly as-new condition. The screw elements are also as new. Options & Customizations: Upon request, we can design and install suitable tooling, such as strand dies, and integrate additional peripherals such as screen changers, pelletizing units, dosing technology, or other customer-specific components. The machine can thus be configured and delivered ready-for-operation according to customer requirements.