Used Niro Atomizer Minor for sale (605)

Condition: ready for operation (used), LAIPPLE / KEB M63L / 4a-SO SN:L113063970025005, used, minor signs of wear, 100% functional, scope of delivery as per photos Hodei D I D Njpfx Adzsn

Condition: ready for operation (used), SEW Eurodrive DT90L4 / TH motor SN:3010351801.0001.99, used, minor signs of wear, 100% fully functional, scope of delivery as per photos. Hodpfx Adox Duc Ejzjn

Condition: ready for operation (used), Siemens 1FT5066-0AC01-2 - Z permanent magnet motor SN E0T98376301008 Z = holding brake installed + prepared for encoder system + 06I0 H33K rotary encoder, used, minor signs of wear, 100% functional, scope of delivery as per photos Hsdpfx Adsmbr I Djzsn

Condition: ready for operation (used), Philips 4022 228 3162 Dig.M Contr 3Axes, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Hedei Ecizspfx Adzjn

Condition: ready for operation (used), Bürkert SC00015-6U F03F05-N-DS-11 AU Pneumatic rotary actuator 214529, coil voltage 24 VDC, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Hsdji D Ul Dopfx Adzsn

Condition: ready for operation (used), SEW Eurodrive MDX61B0015-5A3-4-00 MOVIDRIVE inverter SN:01.7166473401, used, minor signs of wear, 100% functional, scope of delivery as per photos Hodpfx Adoqdm Raezen

Condition: ready for operation (used), SEW Eurodrive MDX61B0015-5A3-4-00 MOVIDRIVE inverter SN:0633554, used, minor signs of wear, 100% functional, scope of delivery as per photos Hjdpjqdm Rdofx Adzen

Condition: ready for operation (used), Rexroth HMS02.1N-W0028-A-07-NNN MNR: R911309078 IndraDrive M single-axis inverter, serial no. INDRAD 53144, used, minor signs of wear, 100% functional, scope of delivery according to photos Hjdpfxoi Ecvms Adzjn

Condition: ready for operation (used), Siemens 1FT5066-0AC01-2 - Z permanent magnet motor SN E0T98376301014 without cover Z = holding brake installed + prepared for encoder system, used, minor signs of wear, 100% functional, scope of delivery as per photos Hsdpfembr Najx Adzsn

Condition: ready for operation (used), SEW Eurodrive D36HS DV132S4/2BMG gear motor , serial no. according to photo , hole spacing of mounting holes: 225 x 140 mm, Ø drive shaft: 28 mm ,used, minor signs of wear, 100% functional ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hjdpfji D N N Esx Adzon

Condition: ready for operation (used), Bosch SM 4.7/20-G16 Servo Control Module 1070917161, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Hodsi D Ufdepfx Adzon

Condition: ready for operation (used), Siemens 1FT5064-1AF71-4AB0 AC-VSA Motor SN: EK984395701010, used, minor signs of wear, 100% functional, scope of delivery as per photos Hedpjwch R Ajfx Adzon

Condition: ready for operation (used), Bosch SM 4.7/20-G16 Servo Control Module 1070917161, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Hsdpfxji D Ufhe Adzen

Year of construction: 2024, condition: excellent (used), functionality: fully functional, Pneumatically operated grease pump from SAMOA – the industry standard for lubrication services in workshops and for agricultural and construction machinery. Completely assembled and mounted on a trolley with a bucket attachment, pressure regulator, pressure gauge, and grease hose. The pump is mounted directly onto a standard 20 kg grease container (Hobbock). Hsdpfx Ajzabryjdzon The PumpMaster 3 is SAMOA's best-selling series and is known for its reliability. The unit is practically new (year of manufacture 01/2024 according to the nameplate), with only minor signs of use. Technical data: - Model: PumpMaster 3, Part No. 405100 - Gear ratio: according to the nameplate - Max. air pressure: 10 bar - Drive: compressed air - Construction: trolley with carrying handle and wheel - Medium to be pumped: grease up to NLGI class 2 - Manufacturer: SAMOA Industrial S.A., Made in Spain - Year of manufacture: 01/2024 Collection / Transport: Self-collection or shipment via freight forwarder on a pallet. Grease container may be included (to be clarified on-site).

Condition: good (used), Year of construction: 2001, sheet width 3050 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 - 8.0 mm down holder 13 Stück distance between columns 3070 mm cutting angle 1.0 - 4.0 ° no. of strokes ~ 22 Hub/min Control ELGO P8511 oil volume 240 l voltage 400 V total power requirement 15.0 kW weight 8000 kg range L-W-H 3550 x 2350 x 1900 mm good condition (!!) from a maintenance workshop Hodpfoy Ig R Ejx Adzen Equipment: - NC electro-hydraulic guillotine shears - heavy / stable welded construction (machine body) - NC ELGO digital control unit "P8511" - NC electro-motorized backgauge on ball screws - electro-hydraulic cutting angle adjustment * Front analog cutting angle display - 1x stable side fence, with T-slot and mm scale - 3x stable support arms, with T-slot and mm scale - Ball castors in the work table incl. recessed grips - Front finger guard - can be folded up at the front - 1x freely movable foot switch - 2x front emergency stop button - Rear safety guard (protective grille) - original operating instructions

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 560 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 10,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis Enshu EV450 was manufactured in 2001. It features an X-axis travel of 560 mm, Y-axis travel of 450 mm, and Z-axis travel of 460 mm. The machine is equipped with tooling for keyway machining and has a spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the Enshu EV450 vertical machining center we have for sale. Contact us for further details. • CNC control: Yasnac J100M • Special configuration: Equipped with tooling for keyway machining • Rapid traverse (X/Y/Z): 40,000 / 40,000 / 40,000 mm/min • Spindle motor power: AC 7.5 kW (10 min), AC 5.5 kW continuous • Pallet changer: Yes • Pallet size: 400 × 500 mm • Tool magazine capacity: 20 positions Hedpfx Adoy Rr Arszon • Measuring system: Renishaw probe (2018) • Important maintenance: • Tool magazine gearbox serviced/repaired (2021) • Z-axis replaced (2019) • Y-axis replaced (2019) • Ballscrews overhauled (2019) • Telescopic covers replaced (2019) • Spindle line repaired (2019) • Spindle taper overhauled (2019) Additional equipment • RRRobotica Atom 20 S automation cell (2015), fully functional and certified • Pallet storage system available with the robot cell • Note: Robot/work cell is included in the machine sale price Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2019, operating hours: 8,833 h, 2019 | Caterpillar 930M | Used Wheel Loader | 8833 hours 📍Location: Netherlands 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 40700 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 52 inspection points 35 approved ✅ 13 imperfect ℹ️ 4 issues ⚠️ 📌 Inspector's Comment: The machine recently underwent a refurbishment including the installation of new original Cat fenders (L+R) and a replacement windscreen, along with a full wash, repaint, and minor material repairs; however, its actual condition remains critical as it suffers from major operational failures caused by deep-seated electrical corrosion, multiple active warning lights, and a heavily gouged coupler, with the severe oxidation on material edges proving that the metal is being "consumed" and that the recent paintwork was only a cosmetic fix for a structural problem. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39790 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Hedpsy Eid Ajfx Adzjn ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Hjdpfsyxr T Tjx Adzen Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 230 mm, travel distance Z-axis: 520 mm, overall weight: 4,100 kg, number of axes: 5, This 5-axis MORI SEIKI SL-153 SMC was manufactured in 2000. It features a maximum X-axis travel of 230 mm and Z-axis travel of 520 mm. The machine includes a hydraulic chuck system, chip conveyor, and multiple driven tool holders for enhanced machining capabilities. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-153 SMC horizontal turning machine we have for sale. Contact us for further details. • Machine configuration • Enclosed CNC lathe • Hydraulic chuck system • Foot pedal included • Automatic bar feeder interface likely installed • Tooling and included holders Hedpfoy N Shlsx Adzon • 3x radial driven tool holders • 4x axial driven tool holders • 2x for main spindle machining • 1x for counter spindle machining • 1x shared output for both spindles • 2x special double boring bar holders (bore Ø20 mm) • Prepared for Schunk TendoTurn DSE hydraulic clamping accessories (Schunk accessories not included) • Multiple external tool holders • Axial tool holders • Boring bar holders with Ø25 mm and Ø32 mm bores • Accessories for direct mounting of square shank tools on turret • Collet holders • 2x Bellegrandi collet holders type MSCTN52 & MSCTNR52 • Suitable for BA and BD type collets size 52 • For main and counter spindle use • Electrical data • Voltage: 200 V • Frequency: 50 Hz • Full load current: 116 A • Spindle motor current rating: 76 A • Rated power: 40 kVA • Condition • Currently disconnected • Reported functional before removal • Available for inspection Additional equipment • Chip conveyor included (separate accessory) • LNS Hydrobar Sprint 555 / 3M automatic bar feeder • Serial number: 220250 • Year: 2006 • Bar length capacity: 3000 mm • Guide channel suitable for turning applications • Compatibility: Seller states compatible with Mori Seiki SL-153 SMC with minor modifications; reportedly never worked with this lathe previously • Condition: Reported functional Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 500 kg, The machine was purchased during a company liquidation. Flowpack Machine ITALDIBIPACK Dibiflow 500 – Year of Manufacture 2021 – Excellent Condition For sale is a high-quality flowpack packaging machine from ITALDIBIPACK, model Dibiflow 500, year of manufacture 2021. The machine is in excellent, well-maintained condition and is ideal for the efficient packaging of various products in tubular bags. Technical Data Manufacturer: ITALDIBIPACK S.p.A. Model: Dibiflow 500 Year of manufacture: 2021 Power connection: 400V – 3Ph + PE + N – 50/60 Hz Power: 4.3 kW Weight: approx. 500 kg Features & Equipment • Robust stainless steel construction • High-quality sensors for product and film detection • Adjustable guide rails for different product widths • Clean, modern control and drive technology • Ideal for food, non-food, industrial products, and more • CE marking • Perfectly suited for continuous packaging processes Condition The machine is ready for immediate use and shows only minor signs of wear. The guide systems, rollers, sensors, and the entire mechanical assembly are in very good condition (see photos). Price Negotiable – €15,000 + €4,000 for printer. Hodpfxjxw S Ixe Adzon

Condition: excellent (used), Year of construction: 2018, Chassis for edge banding machines Was mounted on Homag Edgeteq S-200, KDF 1130 FC (1100kg). Will certainly also fit other machines, such as Brandt (minor modifications may be necessary) Length of U-section: approx. 1130mm Overall height incl. castors: approx. 150mm Hjdew S Dmdjpfx Adzon 4 sturdy steel swivel castors with grease fittings 2 locking brakes 2 leveling plates for height adjustment Machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller".

Condition: used, High-quality mushroom cultivation facility with various machines for sale due to business closure! Stainless steel conical mixer, 6000 L capacity, including a platform for cleaning or inspecting the contents from above. Protected drive from below, including a complete spare drive unit. Price: €9,999 net Two air conditioning units with control systems: 1. Air conditioning unit for cleanroom technology with 5 filter stages. Price: €2,990 net 2. Air conditioning unit for the cultivation room. Price: €1,990 net Two high-pressure humidification systems, 125 bar, with numerous accessories. Price: €2,990 net/unit. Mobile cooling unit – 25 kW output, in 2 power levels. Price: €1,990 net Furthermore, various accessories: Blue multi-boxes in various designs, asparagus boxes, plastic boxes 60x40 cm, etc. Various electric chain hoists, e.g., from Demag. Various fans, e.g., with integrated water atomization. Note: The air conditioning units and stainless steel mixer are still in working order and can be demonstrated! The machines are in used condition, without any warranty! Shipping: Collection only! Hedpfsy Tlikjx Adzsn We are happy to provide further information.

Condition: used, mileage: 109,000 km, power: 110 kW (149.56 HP), first registration: 08/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, loading space length: 4,200 mm, loading space width: 2,060 mm, loading space height: 2,300 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Equipment: Navigation system * Power steering * Partition wall * Central locking Speed control: Cruise control Air conditioning: Air conditioner Safety: ABS Parking assistance: Camera * Rear 2 large rear doors Hsdpjy D Ip Uefx Adzen Cargo area (internal): L 4.20 m x W 2.06 m x H 2.30 m Payload: 950 kg The vehicle is in good condition with minor signs of use! Technical inspection (TÜV) valid until 01-2028 Financing possible through Santander Bank

Condition: used, mileage: 245,000 km, power: 172 kW (233.85 HP), first registration: 06/2019, fuel type: diesel, overall weight: 11,990 kg, next inspection (TÜV): 07/2026, color: blue, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,550 mm, Equipment: air conditioning, soot filter, tail-lift, * Tail lift Air conditioning: Air conditioner Hydraulic system: None The vehicle is in good condition! Minor dent on the cab – see pictures Hedpfxoy D Itmo Adzen Loading area (internal): L 4.70 m, W 2.50 m, H 2.50 m MOT (TÜV) valid until 07-2026

Condition: used, mileage: 99,850 km, power: 130 kW (176.75 HP), first registration: 05/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 05/2026, color: blue, gearing type: automatic, emission class: euro6, number of seats: 7, loading space length: 3,600 mm, loading space width: 2,200 mm, Equipment: ABS, air conditioning, central locking, crane, soot filter, * Crane * Power steering * Partition wall * Central locking * radio * bluetooth * 2 keys * multifunction steering wheel Speed control: Cruise control Air conditioning: Air conditioning Safety: ABS Loading crane Hummel GSK 500 Max lifting capacity: 500 kg Cable length: 65 meters Crane year: 2020 Hjdpfxsy D Iuqe Adzjn Platform loading area: L 3.60 m, W 2.20 m Payload: 1267 kg TÜV valid until 05-2026 The vehicle is in good condition, minor signs of use – see pictures.