Used Olympus Gold Expert Spectrometer for sale (2,299)

Year of construction: 2017, condition: used, This listing is for a Agilent Eclipse Fluorescence Spectrometer. Fgjdsxx Ax Rspfx Adcjc The unit is in full working condition and is ready for immediate release. Supplied with cables, software disk, License key,spare diffuser and Neutral density attenuator. The Agilent Cary Eclipse fluorescence spectrometer is sensitive, accurate, and flexible. Ideal for use as a routine fluorometer, the Cary Eclipse can easily be switched between fluorescence, phosphorescence, chemiluminescence, and bioluminescence measurements. Additional flexibility can be achieved through various accessories, including temperature control and solid sample handling, automatic polarizers, and a microplate reader for high sample throughput. Type:Benchtop fluorescence spectrometer Control Software :Cary WinFLR Light Source:Xenon flash lamp (80 Hz) with 10-year warranty on new instruments Maximum Scanning Speed :24,000 nm/min Modes of Operation:Fluorescence,Phosphorescence,Chemiluminescence,Biolumi nescence,Time resolved phosphorescence. Power Requirements:100-240 VAC, 50/60 Hz Spectral Bandwidth Emission: 1.5 nm, 2.5 nm, 5 nm, 10 nm, 20 nm & 10 nm round nm Excitation: 1.5 nm, 2.5 nm, 5 nm, 10 nm, 20 nm & 10 nm round nm Wavelength Accuracy:± 1.5 nm Wavelength Range:Operational emission: 200 - 900 nm Operational excitation: 200 - 900 nm Depth:644 mm Height:271 mm Weight:30 kg Width:608 mm

Condition: excellent (used), The probe was used on a Zeiss Prismo Ultra as a replacement probe with few operating hours. Fgjdpfxsy Epm Ij Adcec

Condition: used, mileage: 85,220 km, power: 90 kW (122.37 HP), first registration: 06/2019, fuel type: diesel, axle configuration: 4x4, wheelbase: 2,920 mm, fuel: diesel, CO₂ emissions: 139 g/km, fuel tank capacity: 69 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, Year of construction: 2019, Equipment: ABS, Android Auto, Apple CarPlay, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, hill-start assist, navigation system, power mirror, sliding door, start-stop system, tire pressure monitoring, trailer coupling, = Additional options and equipment = - Rear parking sensors - Right-hand side sliding door - Automatic dipped headlights - Exterior mirrors in body color - Heated exterior mirrors - Passenger airbag - Front electric windows Fgodpoypqqqefx Adcjc - Electrically folding exterior mirrors - Electrically adjustable exterior mirrors - Euro 6 - Driver airbag - Remote central locking - Rear doors - Height-adjustable driver's seat - Height-adjustable steering wheel - LED daytime running lights - Lumbar support - Front center armrest - Multimedia capability - Fog lights - Front and rear parking sensors - Radio - Radio with DAB - Rain sensor - Reversing camera - Immobilizer - Bumpers in body color - Blind spot monitoring = Further information = General information Number of doors: 5 Model range: Apr. 2016 - May 2019 Cabin: single Technical information Torque: 340 Nm Number of cylinders: 4 Engine displacement: 1,997 cc Acceleration (0–100): 12.6 s Maximum speed: 169 km/h Dimensions Length/Height: L1H1 Weights Unladen weight: 1,565 kg Payload: 1,535 kg Gross vehicle weight: 3,100 kg Interior Interior: black Consumption Average fuel consumption: 5.3 l/100km Urban fuel consumption: 5.9 l/100km Extra-urban fuel consumption: 4.9 l/100km Maintenance, history, and condition Number of owners: 2 APK (general inspection): valid until 03/2027 Number of keys: 2 (1 remote control) Product safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: used, Year of construction: 2012, Overview  The crate control was built in 2012 by the German manufacturer Syscona. The percentage of foreign bottles at which the crate is rejected can be set. Technical details Capacity: 3,800 crates/h  Longitudinal run  Previously used formats: 12x 1L PET bottles  Inspection via camera  Including pre-belt and line distributor 230V/ 50Hz  Fsdpfx Aeqc E I Redcegc

Condition: new, pressure 80.0 t chamfer lenght 2600 mm distance between columns 2200 mm column arm 250 mm ram stroke speed 90.0 mm/sec work speed 7.5 mm/min return speed 60.0 mm/sec work stroke 160 mm dayligth 380 mm table height 900 mm oil volume 150 ltr. Fgjdpfexaafwjx Adcjc voltage 400 Volt weight 5227 kg range L-W-H 3750 x 1950 x 2400 mm Furnishing: - DELEM - CNC control model DA-58T - controlled axes: Y1 - Y2 and X - AKAS laser in front of the machine - manual crowning - Upper tool, deer foot - Lower tool, die block with 4Vs - SICK light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes

Condition: new, pressure 200 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 250 mm ram stroke speed 100 mm/sec Fedpfxjxaalwj Adcegc return speed 75,0 mm/sec work speed 7,0 mm/min work stroke 180 mm dayligth 415 mm oil volume 200 ltr. table height 900 mm voltage 400 Volt range L-W-H 4450x2050x2650 mm Furnishing: - DELEM - CNC control model DA-58T - controlled axes: Y1 - Y2 and X - FIESSLER AKAS - laser protection in front of the machine - Deer foot upper tool - Universal die block - manual table crowning - Safety device: light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes

Condition: new, pressure 160 t chamfer lenght 3100 mm distance between columns 2600 mm column arm 250 mm ram stroke speed 90.0 mm/sec work speed 7.5 mm/sec return speed 80.0 mm/sec work stroke 160 mm dayligth 395 mm table height 900 mm back stop - adjustable max. 800 mm oil volume 200 ltr. voltage 400 Volt total power requirement 11.0 kW weight 7524 kg range L-W-H 4250 x 1900 x 2550 mm Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution Fgedjxab Hiopfx Adcoc * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - controlled axes : Y1 - Y2 and X - manual table crowning - AKAS - laser protection device f. d. machine - Upper tool, deer foot - Lower tool, die block with 4V's - Light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH/HOERBIGER hydraulic system - CE mark/Declaration of Conformity - Operating manual : machine and control - Safety manual : press brakes

Condition: new, pressure 160 t chamfer lenght 3760 mm distance between columns 3250 mm column arm 250 mm ram stroke speed 90.0 mm/sec work speed 7.5 mm/min return speed 80.0 mm/sec work stroke 160 mm dayligth 395 mm table height 900 mm oil volume 200 ltr. voltage 400 Volt weight 8514 kg range L-W-H 4910 x 1900 x 2550 mm Furnishing: Fgedoxabb Topfx Adcsc - DELEM - CNC control model DA-58T - controlled axes: Y1 - Y2 and X - SICK light barrier in front of the machine - Upper tool, deer foot - Lower tool, die block with 4Vs - manual table crowning - SICK light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes

Condition: new, empty load weight: 825 kg, maximum load weight: 1,775 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,420 mm, loading space width: 1,670 mm, loading space height: 2,300 mm, loading space volume: 13.3 m³, color: grey, construction height: 2,670 mm, working width: 2,110 mm, Hydraulics, Automatic reverse drive, Hot-dip galvanizing, New color: Iron Grey, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle - TÜV: New/2 years - Availability:* IMMEDIATELY AVAILABLE * - Number of animals: 2 - Gross vehicle weight: 2.600kg - Unladen weight: 825 kg - Payload: 1,775 kg - Interior dimensions: 328 x 166 x 230 cm (L x W x H) - Overall exterior dimensions: 443 x 211 x 267cm (LxWxH) - Tires: 185/65R14 steel rim - Brake: yes - Support wheel: yes - Automatic with comfort handle - 100km/h: Included! - incl. vehicle documents Vehicle body: - Floor: ALUMINIUM floor - Drop sides/body: Anodized double-walled aluminium - Roof material: Full polyester - Tack room: Yes - Tack room equipment: Luggage net, saddle holder can be swung out, make-up mirror, bridle holder, lockable door, door lock - Feed troughs: Yes, recessed in tack room - Chassis: Pullmann 2 independent suspension with coil spring and shock absorber - Height of stall bars: 99 to 119cm, adjustable - Distance between stall bars: 172 to 191cm, adjustable - Distance between tack room and breast bar: outside 32cm / with partition wall: 48cm - Tailgate material: approx. 1000kg load capacity, rubber with tread strips and anti-slip - Tailgate function: Hinged door and tailgate combination - Drain flap: no - Overrun device & brake: KNOTT - Lighting plug: 13-pin - Approval: COC papers Standard equipment: - Pullmann2 chassis Independent wheel suspension with coil spring - incl. wheel shock absorber Wheel shock absorber (100 km/h) - Aluminum floor - Aluminum walls - Tethering option outside - Tethering option inside - Padded safety stall rail system - Height adjustment for stall rails - Depth adjustment for stall rails - Panic release at the front - Saddle compartment inside with: Swivel saddle holder, net, mirror, bridle holder - High entrance door - Lockable entrance door - Door retainer on entrance door - PVC transparent partition wall - Large windows can be pushed open at the front - 2 additional windows at the side - Rubber glued to the floor and sealed - Hay net hooks - PVC transparent partition wall - Single mudguards, (black) - Interior light at rear - Side pads (2 pieces) - Step protection on side walls (GRP plastic) - Tarpaulin roller blind as net - Maneuvering handle - Lifting device gas pressure shock absorber on tailgate - Step on rear flap - 3rd brake light on rear flap - Light on rear flap - Light on rear flap - Light on rear flap - Light on rear flap - Light on rear flap. Third brake light on rear flap - Lighting system with reversing light - 13-pin plug Accessories can be retrofitted - please enquire: - Cover for automatic jockey wheel - Spare wheel with holder - Spare wheel cover - Anti-sway hitch - Weight reduction to different total weight - Aluminum rims - Approach mirror - Climbing aid - Storage bracket for saddle (KTL-coated) - Additional interior light - Foal grille - Feeding trough for hanging with holder - Chest bar pad - Box bar continuous, padded (rear) - Full-length, padded stall rail (front) - Wear mat/scratch mat - Video surveillance system incl. reversing camera New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop Fjdpfx Adsu Hrrkscjgc

Condition: good (used), Waters Type: Synapt G2-Si SYNAPT G2-Si mass spectrometry (TOF with ion mobility) New discovery opportunities for your lab Data, data processing. Powerful. SYNAPT enables the detailed characterization of complex mixtures and molecules with uncompromising qualitative and qualitative performance, optimized workflows and a platform of unparalleled versatility. Ultimate UPLC/MS/MS performance Powerful data-independent and data-dependent solutions CID and ETD fragmentation Wide range of experimental options Upgrade to three separation dimensions! Condition: used Scope of delivery: (see picture) Fjdpfx Adevitlmjcogc (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Spectro Type: Ciros Vision CCD Analyzer Ciros Vision CCD Total height: 162cm, total width: 150cm, total depth: 90cm Adjustable extractor Total air output 500m³/h Condition: used Scope of delivery: (Autosampler as shown) Fodpfxovyd Ruj Adcjgc (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Bruker Type: Tensor 27 IR spectrometer Full sample flexibility. The improved QuickLockTM mechanism and the locking button on the front even bulky accessories can be installed quickly and, above all, safely. The INVENIO can also be equipped with three software-controlled beam outputs for a variety of external modules. FPA micro and macro imaging Variable external sample chamber (left and right) for individual experiments Fiber optic coupling to fiber probes for liquids and solids Integration sphere Autosampler for liquids High-throughput analysis module HTS-XT Reflection unit for the air-water phase boundary Much more! Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone. Fgsdpfxjvwcikj Adcec

Year of construction: 2023, condition: like new (used), Thermo Fisher Type: ARL easySpark metal analyzer Analysis table spectrometer with PC, monitor and software Thermo Scientific OXSAS 2.7 software OXSAS is the most modern software for optical emission spectrometers. Current analyses are displayed in tabs. Immediate editing of data sets using fill-down and increment-down tools OXSAS is a multi-processing application with amazing capabilities and potential. The comprehensive functionality of OXSAS enables it to meet all your requirements. Technical machine description: Condition: fully functional In mint condition Year of manufacture: 02/2023 Technical description of the system: The ARL easySpark metal analyzer is designed to meet the challenges and requirements of small to medium-sized plants and laboratories in the metal industry that require high-quality but cost-effective OES analysis for the production of parts for the automotive, aerospace, consumer goods and other industries. The device impresses with its particularly high resolution thanks to a unique optical system based on multi-grating/CCD (charge-coupled device). Additional benefits of the Thermo Scientific ARL easySpark analyzer include: The ability to accurately analyze all elements, from trace levels to percent, in all solid metal samples A breakthrough spark excitation and optical design to ensure best-in-class performance Intuitive, user-friendly Thermo Scientific OXSAS analysis software for a quick learning curve and easy routine operation A robust and reliable design that requires minimal maintenance Compliance with safety and quality guidelines A simple design that is suitable for both novice production users and expert lab staff The instrument is ideal for other areas such as metal recycling, academic and non-academic laboratories and primary metal producers where a cost-effective solution for analyzing metal products and materials for quality assurance and process control or a secondary instrument is required. Power connection: 110-230 VAC, 50Hz or 60Hz Fsdpfx Ajv Hbvbsdcsgc Max. power: 600 VA Dimensions: Approx. L x H x D 0.80m x 0.45m x 0.70m Weight: Approx. 80 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Optical emission spectrometer Ultima 2 benchtop device, sequence spectrometer with a 1m monochromator, 2400 g/mm grating in first and second order 160-800 nm without image Quick overview analysis IMAGE: Quick overview analysis IMAGE NAVIGATOR for JY 2000-2, JY Ultima 2 or JY Ultima 2C External closed cooling circuit for cooling the Ultima 2's HF coil Argon humidifier - for analyzing solutions with a high salt content. ULTIMA 2 ICP-OES - Optical Emission Spectrometer reliable high-efficiency 40.68 MHz semiconductor generator complete and precise wavelength scan from 160 to 800 nm as standard Fgodpfour Rmvox Adcec highest practical resolution

Condition: used, HPLC Waters The system consists of these modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow control modules Flow rate from 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Fodovcnpaopfx Adcjgc Auxiliary solvent manager Flow rates from 0.10 to 5.00 µl/min. Flow control module Flow rate from 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples it takes from microplates or vials into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard rinse, or it can do so in less than 60 seconds, including a double standard flush. The sample manager accepts standard impression plates, 5.03 $0.02 in. x 3.365 $0.02 in, SBS/ANSI compliant plates (maximum height of 2.2 inches, including covers). The sample manager can test samples at any temperature between 4 and 40 °C (39 and 104 °F) at ambient conditions of 25 °C (77 °F) or less. Heating and trapping module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient to 65 °C (149 °F). The column base can be swiveled outwards to any position between 0° and 180°. In the 0° "Home" position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° "away" position, the analytical column can be connected to a mass spectrometer (on the right-hand side of the system). The Synapt G2 is a Q-TOF based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used as a peptide identification only (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Instruction manual Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, functionality: unexamined, machine/vehicle number: TSH 065 D, Used Pfeiffer TSH 065D with Mass Spectrometer. Complete set! Turbo pump: Pfeiffer TSH 065 D (Controller Pfeiffer TCP 015) Diaphragm pump: Vacuubrand MZ 2 NT Fgedpfx Aow H Np Isdcsc Mass Spectrometer: Balzers QME 064 + Partial Pressure Gauge Printer: Philips PM8222 recorder Complete with many vacuum components.

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: 13RO210, We are offering this used Oxford Instruments PMI-MASTER Pro mobile spectrometer, year of manufacture 2014. Model year: 2014 Input voltage: 24 V DC Power: 500 VA Fgedeywwr Sjpfx Adcec The spectrometer was originally purchased new by us, has always been serviced by Oxford Instruments Analytical GmbH, and is in good, working condition. Last maintenance: 09/2024. The device was in operation until 09/2025. If you have any questions or require further information, please send us a message or give us a call.

Condition: new, functionality: fully functional, machine/vehicle number: 12623007, empty load weight: 730 kg, maximum load weight: 1,270 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,280 mm, loading space width: 1,670 mm, loading space height: 2,300 mm, suspension: other, Year of construction: 2026, Loading dimensions approx. 1670 mm x 3280 mm x 2300 mm External dimensions approx. 2130 mm x 4475 mm x 2705 mm Permissible total weight: 2000 kg Payload: approx. 1270 kg (payload may vary depending on additional equipment) Manufacturer: Cheval Liberté Special features Fgodpoi R Hvtefx Adcjc - Aluminium horse trailer GOLD Origins (2 horses) - Polyester roof and front section (aerodynamic) - Rear ramp in aluminium / pivoting and swivelling with rubber mat - Lockable tack room - Roll-up tarpaulin (air and light permeable) - Shock absorbers installed incl. 100 km/h approval - Lockable side door (large version) - Interior lighting with switch - Vehicle documents included Further equipment - Aluminium floor with 8 mm rubber mat (bonded and sealed) - Sliding windows left and right (tinted) - Partition bars front and rear (split / adjustable) - Centre partition (removable) - Emergency release - Kick protection and side padding Chassis - Knott | Rubber suspension axle | V-drawbar | Automatic heavy-duty jockey wheel | Reverse drive automatic Electrics - 12 Volt | 13-pin plug | Rear fog lamp If you wish to purchase this trailer or have further questions about trailers, please use our internal horse trailer reference "No. 12613027".

Condition: new, empty load weight: 780 kg, maximum load weight: 1,220 kg, overall weight: 2,000 kg, 2-horse trailer with saddle room from Cheval Liberte model GOLD-ORIGINS. Beautiful design, aerodynamic, various poly colors, aluminum walls and aluminum floor. The ramp/door system allows pallets and horses to be loaded stress-free and without injury and the interior is easier to clean. This means that the horse cannot slip off the flap and the risk of injury is significantly lower. The two-horse trailer is equipped with a rubber spring axle, saddle room, polyester hood, aluminum walls, aluminum floor, entry door, flap door system, interior light, automatic support wheel, stable frame, V-drawbar and so on. Horse trailer accessories such as tie-down brackets, 100 km/h, feed bucket, weather protection hood, drawbar protection, trailer lock, aluminum rims and scratching mats. Fodpfx Aev A Tuhodcsgc The structure is splash-proof.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 12,000 W, laser wavelength: 1,060 nm, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness aluminum (max.): 35 mm, sheet thickness brass (max.): 25 mm, sheet thickness copper (max.): 25 mm, table length: 3,100 mm, table width: 1,550 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 150 mm, positioning speed: 280 m/min, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 2,150 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, compressed air connection: 14 bar, overall weight: 12,000 kg, total length: 10,000 mm, total width: 2,550 mm, total height: 2,500 mm, warranty duration: 12 months, space requirement height: 2,500 mm, space requirement length: 10,000 mm, space requirement width: 2,550 mm, Equipment: cooling unit, safety light barrier, Our flagship model: G3015 HF Expert 12KW Fiber Laser Cutting Machine The price includes delivery, installation, training, CAD-CAM software, and filtration system. Machine location: Germany. Delivery within Germany is free of charge. The HF Expert is one of our highest-quality and most compact fiber laser cutting machines. It is the perfect entry into professional laser part manufacturing and serial production. Han’s Laser stands out with utmost precision, robust industrial quality, and state-of-the-art fiber laser technology, and ranks among the industry’s leading manufacturers with around 17,000 employees and over 100,000 machines sold worldwide. Fsdpfx Aov Nzt Esdcsgc This machine is ideally suited for steel fabricators, sheet metal workers, and series production facilities looking to cut up to 50 mm steel with 12 kW laser power while minimizing post-processing requirements. Thanks to its high energy efficiency, this machine can save up to 25% energy compared to a similar plasma system or CO2 laser system with the same cutting capacity. German customer service in NRW (Rhineland region) with 400m² parts warehouse. German-speaking telephone and on-site support with short response times. All our machines are installed and serviced by us. 80% of the machine’s components are German or European-made. 1.5 x 3 m cutting area X-axis [mm]: 3100 Y-axis [mm]: 1550 Z-axis [mm]: 180 Maximum speed [m/min]: 280 Acceleration: 3 g Precision [mm]: 0.03 Repeatability [mm/m]: 0.02 Dimensions: Length [mm]: 10000 Width [mm]: 2550 Height [mm]: 2500 Maximum sheet weight [kg/table]: 2150 Available laser power: 6 kW, 12 kW, 20 kW Cutting capacity at 6 kW: Steel - 25 mm, Stainless steel - 18 mm, Aluminum - 18 mm Cutting capacity at 12 kW: Steel - 35 mm, Stainless steel - 35 mm, Aluminum - 25 mm • Fully enclosed for laser safety • Compact design reduces shipping costs and shortens installation time • Improved accessibility with side sliding door running the full length • Ergonomic loading and unloading for small workpieces • High dynamics and productivity thanks to powerful control and motors • Integrated control cabinet and laser source with maintenance-friendly access • Fast service response with “Remote Service” • Fully enclosed machine with OD5+ laser safety windows • Small footprint • Versatile operation with adjustable control panel, front door, and side sliding door Higher Dynamics & Productivity • The optimized machine bed and extruded aluminum portal, equipped with the fast real-time Han’s 901 controller (Rexroth) and powerful Rexroth motors, enable the HF Mini S to reach extremely high speeds and acceleration. Configuration and component selection: Control system: Han’s 901 (Rexroth, Germany) Servo drivers: Rexroth, Germany Cutting head: Precitec, Germany Linear guide: Hiwin, Taiwan (China) Rack: Güdel, Switzerland Gearbox: Güdel, Switzerland Servo valve: Lanny, Germany Machine frame: Han’s, China Gantry: Han’s, China Z-axis: Han’s, China Exchange table: Han’s, China

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 100 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Bosch Rexroth, controller model: Han´s 901, laser type: fiber laser, laser source manufacturer: Han´s Laser, laser hours: 20 h, laser power: 12,000 W, laser wavelength: 1,050 nm, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, table length: 3,000 mm, table height: 700 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 280 m/min, feed rate Y-axis: 280 m/min, cutting speed: 10,000 mm/min, repeat accuracy: 0.05 mm, workpiece weight (max.): 2,150 kg, power: 12 kW (16.32 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 14 bar, overall weight: 10,000 kg, total length: 10,000 mm, total width: 2,550 mm, total height: 2,200 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Trade Show Machine, New Machine at an Unbeatable Price!!! The machine offered here is a new trade show model from year 2025, which was exhibited at the EMO show in Hanover in September 2025 and is now looking for a new owner. The machine is new! Demonstration unit! The original list price for this machine is €295,000. Our unique offer for this machine: €199,000!!! including delivery within Germany, installation, and training. No hidden additional costs. The machine can be inspected from October 2025 and tested from December 2025. Cutting samples and cutting videos are available. From here, you will find the machine description. Fedpfx Ajxlt Hfodcogc G3015 HF Expert 12kW Fiber Laser Cutting Machine 1.5 x 3m with hydraulic shuttle table and extraction system, including delivery, installation, CAD CAM software, and training. Our high-end fiber laser cutting system features premium components and a distinctive design Cutting area X-axis [mm]: 3100 Y-axis [mm]: 1600 Z-axis [mm]: 150 Maximum speed [m/min]: 280 Acceleration: 3 g Precision [mm]: 0.03 Repeatability [mm/m]: 0.02 Dimensions Length [mm]: 10,000 Width [mm]: 2,550 Height [mm]: 2,200 Maximum sheet weight [kg/table]: 2,150 Available laser power: 6 kW, 12 kW, 20 kW, 30 kW Cutting capacity (quality cut/separation cut) Steel: 30mm/40mm Stainless steel: 25mm/30mm Aluminum: 25mm/30mm Brass: 14mm/16mm Suitable for processing the following materials: Steel, stainless steel, aluminum, copper, brass, titanium, and nickel alloys Fully enclosed for laser safety Compact design saves shipping costs and reduces installation time Hollow structure design suitable for up to 60 kW Improved access via a full-length side sliding door Ergonomic loading and unloading for small workpieces High load capacity for thick materials thanks to hydraulic shuttle table High dynamics and productivity due to powerful controls and motors Integrated control cabinet and laser source with maintenance-friendly access Various automation solutions available Fast service response thanks to remote service support Fully enclosed machine with OD5+ laser safety glass windows CE compliant The control cabinet, laser source, pneumatic system, lubrication system, and the table drive motors are fully integrated into the main frame. Simple visual inspection via the side sliding door Convenient loading and unloading through the side sliding door Easy cutting of a wide variety of small parts Faster response times for demo cuts Higher dynamics & productivity Thanks to the optimized machine frame and extruded aluminum gantry, equipped with the fast real-time controller 'Han’s 901 (Rexroth)' and powerful Rexroth motors, the HF Expert achieves exceptionally high speeds and acceleration. Configuration and component selection Control system: Han’s 901 (Rexroth, Germany) Servo drives: Rexroth, Germany Cutting head: Han’s Laser Linear guide: Hiwin, Taiwan (China) Rack: Güdel, Switzerland Gearbox: Güdel, Switzerland Servo valve: Lanny, Germany Machine frame: Han’s, China Gantry: Han’s, China Z-axis: Han’s, China Shuttle table: Han’s, China

Condition: like new (used), mileage: 38,000 km, Year of construction: 2023, PEUGEOT EXPERT LONG WHEELBASE YEAR 2023 KM 38000 ENGINE 1.5 DIESEL AIR CONDITIONING STANDARD STEREO STEERING WHEEL CONTROLS SINGLE OWNER STILL UNDER OFFICIAL PEUGEOT WARRANTY FINANCING POSSIBILITY BENITO 3383844139 Fsdpfxev Az Hfs Adcogc MICHELE 3394588233

Condition: like new (used), Year of construction: 2018, Danube Industrial Laundry Dryer Powerful dryer with condesator for hotels, pensions and large families Fsdpfxoc Utidj Adcogc We also have a suitable washing machine 32 Ah connection TOP CONDITION CAN BE TAKEN IMMEDIATELY IN OPERATION WITH QUESTIONS PLEASE ANNOUNCE VIELLENDAN IN ADVANCE

Year of construction: 2022, condition: used, Spectrometer for sale, complete set. Excellent condition. The device has not been used and has been serviced. In operation since 2022. Fodpfx Adsyw Rflecegc

Condition: like new (used), functionality: fully functional, machine/vehicle number: 30112, mileage: 5,557 km, power: 206 kW (280.08 HP), first registration: 12/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, axle spacing: 3,900 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, loading space volume: 21 m³, Equipment: ABS, air conditioning, airbag, differential lock, electric window regulation, tachograph, traction control, Right-hand drive, VOLVO D8K 280HP EURO 6 engine, air suspension, ABS, ASR, high-mounted exhaust on the right, hill-start assist, digital tachograph, 2x beacons, tyres: 1st and 3rd axle 315/80R22.5, 2nd axle 11R22.5. Three-person bench seat, driver's comfort seat, tinted windows, electric windows, air conditioning, radio CD, electrically adjustable and heated mirrors. RosRoca Olympus 21W, body-mounted scales, 2x beacons, adjustable loading edge, open-body RosRoca Beta, comb-lift, lid opener, foldable loading edge. Fsdpfx Adjyandvecogc