Used Optical Multi-Sensor Measuring Machine for sale (74,867)

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, holders, and additional accessories! For more Schütte multi-spindle machines available at the same location, see below! TECHNICAL DETAILS Max. turning length: 80 mm Max. drilling depth: 80 mm Maximum bar diameter round: 32 mm Maximum bar diameter square: 22 mm Maximum bar diameter hexagonal: 27 mm Maximum bar diameter octagonal: 29 mm Spindle circle diameter: 300 mm Standard bar feed: 125 mm Special bar feed: 290 mm Normal longitudinal slide total travel: 100 mm Normal longitudinal slide working travel: 80 mm Special longitudinal slide total travel: 145 mm Special longitudinal slide working travel: 115 mm Cross slide upper slide total travel: 50 mm Cross slide upper slide working travel: 33 mm Cross slide middle slide total travel: 50 mm Cross slide middle slide working travel: 30 mm Cross slide lower slide total travel: 60 mm Cross slide lower slide working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: E-submersible pump Pump capacity: 180 l/min EQUIPMENT Rapid drilling device Gripper device Reaming device Independent auxiliary longitudinal control Motorized cross slide adjustment Kedpjy R Rnyefx Al Njlu Collets Holders Additional accessories

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! This machine is sold complete with collets, tool holders, and additional accessories. For more Schütte multi-spindle lathes available from the same site, please see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Klodpfsy R Rm Ajx Al Neu Standard bar feed up to: 125 mm Special bar feed up to: 290 mm Standard longitudinal slide travel, total: 100 mm Standard longitudinal slide travel, working travel: 80 mm Special longitudinal slide travel, total: 145 mm Special longitudinal slide travel, working travel: 115 mm Upper cross slide travel, total: 50 mm Upper cross slide travel, working travel: 33 mm Middle cross slide travel, total: 50 mm Middle cross slide travel, working travel: 30 mm Lower cross slide travel, total: 60 mm Lower cross slide travel, working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: Submersible electric pump Pump output: 180 l/min EQUIPMENT High-speed drilling unit Gripper unit Reaming unit Independent auxiliary longitudinal control Powered cross slide adjustment Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! Ksdpfsy R Rkusx Al Nelu The machine is sold with collets, holders, and additional accessories! For more Schütte multi-spindle machines being sold from the same location, see below! TECHNICAL DETAILS Maximum material passage: 32 mm Maximum material feed: 125 mm Maximum turning length: 80 mm Maximum drilling depth: 80 mm Turning speed: 200–3,150 rpm Thread cutting speed (right-hand): 11.2–1,575 rpm Thread cutting device: Right-hand thread by underspinning MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & weight Footprint: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Current type: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Holders Additional accessories

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (max.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum bar capacity: 32 mm Maximum bar feed: 125 mm Maximum turning length: 80 mm Maximum drilling depth: 80 mm Spindle speed for turning: 200–3,150 rpm Spindle speed for right-hand thread cutting: 11.2–1,575 rpm MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Required space: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Kljdpfx Aey R Rcwel Nou Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines being sold from the same location, please see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Kodpoy R N Ulofx Al Njlu Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle circle diameter: 300 mm Bar feed normal/special up to: 125 / 290 mm Longitudinal slide travel, standard, total/work stroke: 100 / 80 mm Longitudinal slide travel, special, total/work stroke: 145 / 115 mm Cross slide travel, upper slide, total/work stroke: 50 / 33 mm Cross slide travel, middle slide, total/work stroke: 50 / 30 mm Cross slide travel, lower slide, total/work stroke: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per operation, standard: 60–425 Workpiece revolutions per operation, shortened: 33.5–236 Workpiece revolutions per operation, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor rated power: 18.5 kW Drive motor speed: 1,500 rpm Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space requirement for packed machine: 15 m³ EQUIPMENT Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard/special bar feed: up to 125 / 290 mm Standard longitudinal slide travel, total/traverse: 100 / 80 mm Special longitudinal slide travel, total/traverse: 145 / 115 mm Cross slide travel – upper slide, total/traverse: 50 / 33 mm Cross slide travel – middle slide, total/traverse: 50 / 30 mm Klodpfx Aley R N I Ej Nju Cross slide travel – lower slide, total/traverse: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per cycle, standard: 60–425 Workpiece revolutions per cycle, reduced: 33.5–236 Workpiece revolutions per cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space required for packed machine: 15 m³ EQUIPMENT Collets Toolholders Additional accessories

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, spindle speed (max.): 3,750 rpm, bar diameter (max.): 26 mm, overall weight: 6,800 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For further Schütte multi-spindle machines for sale from the same location, see below! TECHNICAL DETAILS Bar diameter round: 26 mm Bar diameter square: 19 mm Bar diameter hexagonal: 22 mm Bar diameter octagonal: 24 mm Spindle circle diameter: 270 mm Standard bar feed: 125 mm Special bar feed: 290 mm Longitudinal slide travel, standard total: 80 mm Longitudinal slide travel, standard working length: 63 mm Longitudinal slide travel, special total: 125 mm Longitudinal slide travel, special working length: 98 mm Cross slide travel, upper slide total: 40 mm Cross slide travel, upper slide working length: 25 mm Cross slide travel, middle slide total: 40 mm Cross slide travel, middle slide working length: 25 mm Cross slide travel, lower slide total: 50 mm Cross slide travel, lower slide working length: 31 mm Number of spindle speeds: 49 Spindle speed range I: 530–3,750 rpm Spindle speed range II: 236–1,700 rpm Workpiece revolutions per working cycle, standard: 60–425 Workpiece revolutions per working cycle, short: 33.5–236 Workpiece revolutions per working cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Rated drive motor power: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,500 x 1,450 mm Length with bar guide: 6,470 mm Klsdpfey R Nx Dox Al Neu Machine weight: 6,800 kg Space requirement for packed machine: 14 m³

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 405 mm, Mitutoyo Crysta Apex C544 year of manufacture: 2006 x, y, z: 505 x 405 x 405 mm manual storage for measuring probes clamping plate calibration sphere 5 x measuring probes Renishaw TP 200 PH 6M probe incl. computer, software, dongle, and documentation machine is powered up for inspection Klsdpfxey R A Aps Al Nou

Condition: refurbished (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 00059, measuring range X-axis: 1,500 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 900 mm, workpiece weight (max.): 2,000 kg, Equipment: type plate available, Motorized measuring machine, DEA MISTRAL type. DEA RC1 NEW electronics. Automated, indexed measuring head: RENISHAW PH10M + PAA1 + 1 complete measuring probe with 2 magnetic modules. PC-DMIS CAD DCC software license (mathematical data management with DXF-IGES-DWG-STEP-STL import). Personal workstation + 22" monitor. Desk. Set of styli and extensions. Calibration sphere. Klodpfx Alozdfg Ne Nou Filter unit.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: type plate available, Taylor Hobson Talyrond 265 roundness measuring device. Extremely precise, it can measure the roundness of lenses, optics, piston turbine parts, tubes, shafts, but also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft; it is certainly also of interest to motorsports and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog; this is what it looks like, except for the computer, which is a newer, smaller-form-factor HP model. Max. diameter 350mm Max. test piece height 500mm (higher measurements can be taken in two parts, up to a maximum of 1000mm...) Self-centering of the workpiece +/- 5mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg; it was used in a "medically clean environment," and it is extremely clean. It has never been in a dirty machine hall. The year of manufacture is estimated to be between 2002 and 2005. The Taylor-Hobson measuring software is of course included and runs on the supplied HP computer (without a password...). Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) is included for calibration! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped by freight forwarder on two Euro pallets. It is already well secured on them. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and with stretch film to provide maximum protection for transport; the system itself is fixed with "transport safety screws." Shipping costs within Germany are included; I will cover them! So, within Germany: FREE SHIPPING! The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then recalibrate the system on-site; this is recommended after a few years. It is possible to make mistakes during assembly and commissioning. For example, there are several locking screws installed for transport; if you forget them, the system may be damaged when it starts up. Klsdpfjzcqy Ejx Al Neu This is a truly well-maintained, very precise system that will continue to provide excellent service for many years to come!

Condition: defective spare-parts repository (used), functionality: limited functionality, Dear Sir or Madam, We hereby offer you the following device for sale: Keyence XM-1200 coordinate measuring machine. Kedpsyrcx Sofx Al Nolu The device is defective and currently not operational. The machine is sold with the equipment documented in the photos and specified in the advertisement text. Location: 40764 Langenfeld ATTENTION! The device originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information about the current highest bid. Your bid becomes binding upon receipt by email. Please send us your binding bid by 10 a.m. on 13 May 2026. After the auction ends, you will be informed of the auction result within 72 hours.

Condition: used, functionality: unexamined, Dear Sir or Madam, We hereby offer you the following device for sale: Keyence WM-C3000 coordinate measuring machine. The machine is sold with the equipment documented in the photos and specified in the advertisement text. Location: 40764 Langenfeld ATTENTION! The device originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information about the current highest bid. Your bid becomes binding upon receipt by email. Klodpfjyrcx Eex Al Nsu Please send us your binding bid by 10 a.m. on 13 May 2026. After the auction ends, you will be informed of the auction result within 72 hours.

Condition: used, functionality: unexamined, Dear Sir or Madam, We are pleased to offer the following machine for sale: Keyence XM-5000 coordinate measuring machine. The machine is sold with the equipment shown in the photos and listed in the advertisement text. Location: 40764 Langenfeld PLEASE NOTE! The equipment originates from an insolvency. We are auctioning this off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information regarding the current highest bid. Your bid becomes binding upon receipt by email. Please submit your binding bid by 10:00 am on 13 May 2026. Once the auction has ended, you will be informed of the outcome within 72 hours. Klsdpey Iaayjfx Al Neu

Condition: used, Working width 1.350 mm Number of sanding units 2 st. Workpiece thickness max. 150 mm Multi-purpose surface sanding machine Heesemann type MFA 6 Impression Q2 - LF for precise surface, veneer, lacquer and intermediate sanding in woodworking. The machine is suitable for solid wood, coated workpieces and sensitive surfaces in furniture and interior finishing. The infinitely variable feed rate and vacuum clamping ensure a clean and even sanding pattern. Kljdpfoyyc Drox Al Neu Available from week 33/2026

Condition: like new (used), Year of construction: 2022, operating hours: 250 h, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 800 mm, workpiece weight (max.): 1,800 kg, total height: 3,150 mm, total width: 3,255 mm, total length: 1,600 mm, travel distance X-axis: 900 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, overall weight: 4,500 kg, table width: 1,475 mm, table height: 700 mm, table length: 2,830 mm, feed length X-axis: 900 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 800 mm, table load: 1,800 kg, ambient temperature (max.): 22 °C, ambient temperature (min.): 18 °C, maximum load weight: 1,800 kg, Machinery purchased in 2022 and used for only 250 hours, offered for sale due to business closure. In like-new condition. Technical specifications are attached. Klodozdnw Nepfx Al Nou

Condition: excellent (used), For sale: Professional KEYENCE IM-7500 measuring system with IM-7020 head. The device is designed for fast and highly precise measurement of components in production and quality control. The equipment enables automatic measurement of multiple dimensions simultaneously using a camera. Ideal for CNC workshops, tool rooms, and industrial applications. Technical data Manufacturer: KEYENCE Model: IM-7500 Head: IM-7020 Type: Optical measuring system Country of origin: Japan Automatic measurement by camera High measurement accuracy Condition Used Fully functional Normal signs of use Kodsyvv Trspfx Al Nelu Included in the set KEYENCE IM-7500 unit IM-7020 head Monitor Control unit Keyboard and mouse Wiring

Year of construction: 1993, condition: good (used), Measuring Range X – axis 700 mm Y – axis 1500 mm Z – axis 600 mm Accuracy acc. ISO 10360 E = [4,0 + 5,5L/1000] µm Klsdpjgvg I Tefx Al Nsu at temperature range 18 … 22 °C wax. workpiece weight 800 kg base material granit fixing holes M8 x 1,25 Scalesystem Mitutoyo Linear Scales resolution 0,0005 µm DCC Controller Mitutoyo CMMC-3S DC motors all axis Guideways air earings Tilt&swivel head Renishaw PH1 manual, PH9 or PH10M as option Probesystem Renishaw TP200 Computer Windows XPP Workstation Software MCOSMOS-1 V2.4

Condition: good (used), Code: 0405 Brand: VITAP - ITALY Model: ALFA 21 Multiple boring machine for furniture, kitchens, custom furniture, bathroom furniture and various Technical data: N° 21 spindles - Centre distance mm 32 Max drilling depth mm 80 Table dimensions mm 860 x 500 Spindle rpm 2800 Motor power Hp 2,5 Tilting head 0-90° Operating pressure 6-8 atm Overall dimensions mm 950 x 800 x 1140 h Weight kg 300 Kedpjyrrhiefx Al Nelu

Condition: used, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 250 mm, workpiece weight (max.): 40 kg, VideoCheck S 400x200 3D CNC Year of manufacture: 2014 Measuring range: X = up to 400 mm Y = up to 200 mm Z = up to 250 mm Installation area: Depth: 770 mm Width: 778 mm + 400 mm travel Height: 1673 mm + 200 mm travel Measuring device weight: up to 480 kg Max. workpiece weight: mmax = 40 kg Kjdexbifpspfx Al Nolu

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: P20109164, measuring range X-axis: 2,000 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 900 mm, workpiece weight (max.): 2,300 kg, warranty duration: 6 months, total height: 3,328 mm, total width: 1,965 mm, total length: 3,300 mm, overall weight: 5,600 kg, Machine parameters The machine features a granite worktable and axes mounted on air bearings. Measuring range of individual axes X-axis: 2000 mm; Y-axis: 1500 mm; Z-axis: 900 mm Machine dimensions Kodpfx Alozdnqpj Njlu Length: 3300 mm; Width: 1965 mm; Height: 3328 mm Weight: Machine: 5600 kg, max. weight of measured part: 2300 kg Sensing system RENISHAW PH10 sensing head RENISHAW TP20 measuring probe – Alternatively, the machine can be equipped with a Kreon laser scanning head or other components. Software and accessories With the sale of the machine, we will provide an up-to-date license for the Metrolog software and, if necessary, other accessories, according to the customer's additional requirements.

Condition: new, Year of construction: 2026, Working width: 600 mm Working height: 220 mm Minimum workpiece length: 250 mm Kedpfxehwrp Rj Al Nelu Units: 4 1. Saw cutting unit, Random System: Saw cutting head 2. Brush: Metal, diameter 220 mm 3. Brush: Tynex grit 60, diameter 220 mm 4. Brush: Tynex grit 120, diameter 220 mm Height adjustment: Handwheel Height indicator: Mechanical counter Feed rate: 4 - 12 m/min Motor power, saw cutting unit: 1.1 kW Motor power, brushes: 4 kW Motor power, feed: 0.37 kW Machine length: 2800 mm Machine width: 1500 mm Machine height: 1600 mm Weight: 1500 kg

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii - Diameters and distances - Cutting edge length - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. Kodpfxozdz S Te Al Nslu The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 135414, measuring range X-axis: 4,200 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 2,100 mm, controller model: C99, No reserve price – guaranteed sale to the highest bidder! The machine is currently not operational. There are defects on the Y-axis and Z-axis. Further details can be found in the attached service report and calibration certificate. TECHNICAL DETAILS Measuring range X: 4,200 mm Measuring range Y: 1,600 mm Measuring range Z: 2,100 mm Measuring table: 5,000 x 1,800 mm Calibrated measuring volume X-direction: 4,200 mm Y-direction: 1,600 mm Z-direction: 1,600 mm MACHINE DETAILS Control unit: C99 EQUIPMENT Ksdpjy R Taxofx Al Nolu Probe head: TP20 #5M2409 Measuring software: CMM-OS 5.4.00 CAA File: 03.06.2025 Calibration sphere: #134983 Note: The measuring computer HP Z420 Windows 7 can be supplied upon request. Please note this device has a virus infection caused by a hacker attack.

Condition: used, Year of construction: 2021, operating hours: 14,650 h, clamping force: 1,100 kN, displacement volume: 350 cm³, injection pressure: 1,455 bar, overall weight: 60,000 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request Kjdpfx Aey R Eq Aol Nelu terms of payment: 100% prior to delivery

Condition: used, Year of construction: 1996, Technical details: grinding length: 1370 mm grinding width: 560 mm workpiece height: 800 mm total power requirement: 50 kW dimensions of the machine ca.: 9 m ABA Z&B 2000, profile grinding machine with swivel dresser Mounting fixtures: magnet, dividing head E-axis dresser Ksdpfxsw S Hy He Al Njlu B-axis dividing head *