Used Palmberg Height Adjustable Desk for sale (44,345)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 510127C00186, Year of construction: 2012, operating hours: 14,539 h, fuel type: electric, overall weight: 3,650 kg, total height: 1,920 mm, total length: 3,050 mm, total width: 1,290 mm, TECHNICAL DETAILS Tractive force: 25,000 kg Nedpszuli Rofx Amrjwk Number of wheels: 4 MACHINE DETAILS Drive type: Electric Battery type: PzS 465 Battery year of manufacture: 2014 Battery capacity: 465 Ah Battery voltage: 80 V Battery compartment length: 1,020 mm Battery compartment width: 560 mm Battery compartment height: 790 mm Operating hours: 14,539 h Dimensions & Weight Dimensions (L x W x H): 3,050 x 1,290 x 1,920 mm Unladen weight: 3,650 kg EQUIPMENT Full cab User manual available CE marking

Condition: used, mileage: 120,000 km, power: 120 kW (163.15 HP), first registration: 10/2019, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2026, color: white, gearing type: mechanical, emission class: euro6, total length: 6,363 mm, total width: 2,050 mm, total height: 2,522 mm, Year of construction: 2019, Equipment: air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Passenger-side airbag, exterior mirrors electrically adjustable and heated, both sides, design package, driver assistance system: emergency brake assist, reinforced rear suspension, speed limiter, rear wing doors (opening angle 270 degrees), seats in cab: sprung driver's seat, seat base cover Additional equipment: Nodpfezvwxyjx Amrswk Driver's airbag, exterior mirrors with wide-angle, load compartment floor plate, on-board computer, rear wing doors without windows, body/build type: standard high-roof van, padded headrests, fuel tank: 90 liters, load compartment partition wall, engine 2.0 L - 120 kW Blue-HDI FAP CAT, radio pre-installation, 4 speakers, wheelbase 4035 mm, spare wheel in standard tire configuration, low-emission according to Euro 6 emission standard, rear disc brakes, sliding door right for cargo/passenger compartment, SCR system (AdBlue technology), side protection strips, seat upholstery/trim: fabric, seats in cab: double passenger seat (incl. automatic seat belt), seats in cab: driver's seat with armrest, height adjustable, seats in cab: driver's seat with lumbar support, permissible total weight 3.5 t The vehicle is in very good condition! Service booklet, new timing belt Financing possible via Santander Bank

Condition: used, mileage: 97,000 km, power: 90 kW (122.37 HP), first registration: 11/2017, fuel type: diesel, overall weight: 3,100 kg, next inspection (TÜV): 03/2026, color: white, gearing type: mechanical, emission class: euro6, loading space length: 2,750 mm, loading space width: 1,600 mm, loading space height: 1,330 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Special equipment: Audio navigation system NAC 3-D, DAB with color display, front and rear parking sensors incl. rear view camera, increased payload, tailgate, fixed window, wooden floor in cargo area with anti-slip profile and side paneling (wood) with wheel arch covers, partition wall with window in cargo area, sound and thermal insulation, front side airbags, auxiliary heater Additional equipment: Driver and passenger airbags, dual passenger seat, onboard computer, driver assistance system: hill start assist, body type: panel van, lumbar support for driver's seat, adjustable, adjustable steering column, engine 2.0 L - 90 kW Blue-HDI FAP, wheelbase 3275 mm, spare wheel with standard tire, low emissions according to Euro 6, right sliding door, SCR system (AdBlue technology), full-depth side protection strips, visibility package, height-adjustable driver's seat, seat upholstery: fabric, steel rims 7x16, Start/Stop system, 12V socket in load compartment, 12V socket in center console, seat heating The vehicle is in good condition! Internal cargo area dimensions: L 2.75 m x W 1.60 m x H 1.33 m Last inspection at 96,028 km Nwedpfjzvwz Ujx Amrsk Only 1 vehicle key Financing available through Santander Bank

Condition: good (used), mileage: 119,853 km, power: 88 kW (119.65 HP), first registration: 03/2021, fuel type: diesel, tire size: 215/65R16, axle configuration: 4x2, wheelbase: 3,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, total length: 5,450 mm, total width: 1,900 mm, total height: 2,150 mm, loading space length: 2,700 mm, loading space width: 1,660 mm, loading space height: 1,400 mm, Year of construction: 2021, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - Incl. roller - Manual - Radio/cassette Nsdpezwu Afefx Amrswk - Fabric - Partition = Notes = Configuration: 4x2, Payload: 1284 kg, Unladen weight: 1756 kg, Gross vehicle weight: 3040 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 2000 kg, Trailer coupling, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Parking assist: Rear, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: White, Maintenance manual, Heated mirrors, Lighting type: Halogen lamp, Bluetooth, Engine power: 88 kW (118 Hp), Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: Extended, Side paneling, Roof rack: Incl. roller, Side doors: 2, Rear closure: Double door, Central locking, Seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, L2 2x side door, Navigation, Air conditioning, Tow hitch, Roof rack, Maintenance history, 1st owner, Euro6!, Tire type: All-season tires = Additional Information = General Information Number of doors: 2 License plate: VJJ-61-R Axle Configuration Tire size: 215/65R16 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 4 mm Axle 2: Tire tread depth left: 7 mm; Tire tread depth right: 5 mm Weights Unladen weight: 1,756 kg Payload: 1,284 kg GVW: 3,040 kg Functional Loading area height: 60 cm Maintenance APK (Technical Inspection): Valid until 03/2027 Condition Technical condition: Good Optical condition: Good Damage: None Number of keys: 1 Financial Information Leasing price: €259 per month (delivery van, 72 months); Ask for more information and conditions.

Condition: good (used), mileage: 80,534 km, power: 75 kW (101.97 HP), first registration: 06/2021, fuel type: diesel, tire size: 215/65R16, axle configuration: 4x2, wheelbase: 3,280 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 4,950 mm, total width: 1,850 mm, total height: 1,950 mm, loading space length: 2,510 mm, loading space width: 1,590 mm, loading space height: 1,310 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, traction control, = Additional Options and Accessories = - Heated mirrors - Halogen lamp - None - Leather / Fabric - Manual - Radio/Cassette - Blind spot sensor - Partition = Notes = Configuration: 4x2, Payload: 1195 kg, Curb weight: 1635 kg, Gross vehicle weight: 2830 kg, Trailer load, unbraked: 750 kg, Trailer load, center axle, braked: 2000 kg, Type of cab: Single cab, Cruise control, Air conditioning, Number of airbags: 2, Parking assistance: Front and rear, Electric windows, Electric mirrors, Partition, Radio/Cassette, Color: White, Maintenance manual, Heated mirrors, Lighting type: Halogen lamp, Air conditioning, Bluetooth, Blind spot sensor, Engine power: 75 kW (101 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: Extended, Side paneling, Roof rack: None, Side doors: 1, Rear closure: Double door, Workshop equipment, Central locking, Seats: 3, Seat arrangement: 1+2, Seat cover: Leather / Fabric, Seat adjustment: Manual, L2 NAP Euro6 3-seater Maintenance history Workshop equipment 1st owner!, Spare wheel, Tire type: All-season tires = Additional Information = General Information Number of doors: 1 License plate: VKT-98-S Axle Configuration Tire size: 215/65R16 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread depth left: 4 mm; Tire tread depth right: 3 mm Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 4 mm Weights Unladen weight: 1,635 kg Payload: 1,195 kg GVW: 2,830 kg Functional Loading area height: 59 cm Maintenance APK (Technical Inspection): valid until 06.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Nsdpfxszw A Hxo Amrewk Leasing price: 226 € per month (delivery van, 72 months); Ask for more information and terms.

Condition: used, mileage: 41,000 km, power: 100 kW (135.96 HP), first registration: 12/2023, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 12/2027, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 6,109 mm, total width: 2,052 mm, total height: 2,694 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Storage compartment on the dashboard with USB connection, audio system: digital audio system (DAB) with USB and Bluetooth hands-free system, audio/telephone controls on the steering wheel, programmable speed limiter, rear door (opening angle 260/270 degrees), cooling compressor 170 ccm, exterior load space light above the rear doors, steering column (steering wheel) adjustable in height/length, enlarged oil pan. Nedpfx Amezwyyiorowk Additional equipment: Trailer stabilization program (TSM), trailer socket preparation, traction control system (ASR), design: S-series, exhaust pipe on the left side, exterior mirrors electrically adjustable and heated, ceiling light in the cargo area, electronic brake force distribution, rear axle suspension: leaf spring, front axle suspension: transverse leaf spring, windshield and side windows tinted, generator 210 A, speed limiter 160 km/h, urea tank (AdBlue): 20 liters, body/superstructure: high-roof box body with overhang, fuel tank: 70 liters, engine 2.3 liters - 100 kW diesel, wheelbase 3520 mm, low emissions according to emission standard Euro 6d-TEMP, sliding door for cargo/passenger compartment on the right, seats in the driver's cab: double passenger seat, maintenance indicator, permissible total weight 3.50 t. The vehicle has some minor cosmetic signs of wear and tear on the exterior (see pictures), but is like new on the inside! Technically in perfect condition! Financing possible through Santander Bank.

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here, we offer a complete Desktop Metal 3D printer system. Nedszd Tlljpfx Amrswk 3D metal printer studio system from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System includes: 1.1 Desktop Metal Studio 3D printer Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell infills for lightweight strength. 1.2 Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. 1.3 Desktop Metal Studio Sintering Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles tailored to each design and material ensure uniform heating and cooling without the residual stresses found in laser-based systems. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 2021, overall weight: 97 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, number of axes: 3, This 3-axis DESKTOP METAL Metal Studio 2 was manufactured in 2021. It utilizes Bound Metal Deposition technology and features a build volume of 300 x 200 x 200 mm. The machine supports various materials, including 316L and H13 Tool Steel, and operates with a dual extruder system. If you are looking to get high-quality metal 3D printing capabilities, consider the DESKTOP METAL Metal Studio 2 machine we have for sale. Contact us for further details. • Technology: Bound Metal Deposition (BMD) • Process: 2-step (printing and sintering – no debinder needed) • Build volume: 300 x 200 x 200 mm • Layer height: 50 µm to 250 µm • Build plate: Heated up to 120°C (vacuum-adhered) • Extruders: Dual (metal and ceramic support) • Support interface: Ceramic release layer (manual breakaway) • Materials: 316L, 17-4 PH, 4140, H13 tool steel, copper • Software: Fabricate (automated scaling and sintering profiles) Nodeyuyz Njpfx Amrowk • Connectivity: WiFi / Ethernet Additional equipment • Furnace: Max temperature 1400°C; atmosphere: partial pressure Synthogas (Ar/H2); sintering cycle: 16–24 hours

Condition: good (used), Year of construction: 2017, In this offer you buy used office furniture, which is in good condition. They were delivered in 2017 and are generally in very good condition, since little used. Items for sale: We also offer workplace sets for 450€. 1x desk - Manufacturer: FM Nedsiiv Ikspfx Amrewk - 160 x 80 x 76 (stepless height adjustable 68cm to 76cm) - gray top - aluminum frame 1x office chair "Dauphin MagicShape elan - armrests - completely adjustable - cover polo grey/black 1x mobile pedestal - Manufacturer: FM - 43,4 x 80 x 59 - one material drawer - 3 steel drawers with softclose - lockable incl. key Desks: - Approx. 10x desk from the manufacturer FM 1600 x 800 x 680 to 760 (infinitely height adjustable) in the color light gray. Frame made of aluminum - Approx. 12x folding table (can be used as a desk) 1600 x 800 x 720 on castors, in the color light gray. Aluminium frame - Approx. 2x round meeting table 1000mm diameter in the color light gray. Aluminium frame - Approx. 4x high table 1600 x 800 x 1300 in the color arctic white. Frame in white aluminum Chairs: - Approx. 10x Dauphin swivel chair MagicShapeS elan with armrests and fully adjustable. Fabric cover Polo black, base plastic black - Approx. 44x Interstuhl Hero 550H cantilever chair with armrests. Upholstery in ruby red color. Metal frame chrome-plated. - Approx. 52x Interstuhl Hero 550H cantilever chair with armrests. Upholstery in the color ocean blue. Metal frame chrome-plated. - Approx. 10x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color black. Frame in silver color. - Approx. 16x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color ocean blue. Frame in silver color - 12x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color red. Frame in the color silver - 16x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color ruby red. Frame in the color silver Storage space: - Approx. 16x FM 434 x 800 x 590 mobile pedestal with one material drawer and 3 steel drawers. Body completely in the color light gray. Handles made of aluminum meeting table with 4 conference chairs - 750,-€ net high table with 6 bar stools - 1500,-€ net Prices may vary slightly depending on the quantity purchased. We will be happy to prepare a suitable offer for you. You can also purchase each piece of furniture separately. Condition: This offer is used furniture, which may show signs of use (minor scratches or yellowing). Packing and shipping: You are welcome to look at everything during our business hours. Please make an appointment for this! Seaworthy packing and worldwide shipping is possible on request! For more information you can of course also contact us personally.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the winner to pick up the machine between September 21st and October 1st! Njdpfx Ajzqunhomrowk TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance from pallet surface to spindle center: -20 to 430 mm Distance from B-axis center to spindle center: -40 to 410 mm Distance from B-axis center to spindle center: -20 mm Distance from pallet center to Z zero point: 265 mm Distance from pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance from pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool interface: SK 40 Spindle taper: 7/24, Taper No. 40 Spindle bearing inner diameter: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle orientation: Standard Tool clamping force: 7.0 kN Tool Changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free auxiliary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Tool change arm: W-gripper type Feed Rates Rapid traverse rate, X/Y/Z-axis: 50 m/min Rapid traverse rate, B-axis: 30 min⁻¹ Rapid traverse rate, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Tipping feed rate, X/Y/Z-axis: 0 to 4000 mm/min Tipping feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. movement increment, X/Y/Z-axis: 0.001 mm Min. movement increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical Connection Values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and Weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT - Chip conveyor - Coolant system - Tool holders on the tool changer External Reference: Hanon - Lot 1

Condition: new, Year of construction: 2020, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 52AMG162, compressed air connection: 6 bar, working width: 560 mm, warranty duration: 12 months, operating speed: 400 mm/s, Komfi Laminator Amiga 52I (Intelligent In-Line Feeding) New, Manufactured 2020 Specifications: Max. speed of lamination: 25 m/min Max. output: 8000 sheets/h Min. sheet dimensions: 200 × 250 mm Max. sheet dimensions: 560 × 800 mm (or up to 1016 mm) Paper weight: 115-600 g/m² Paper thickness: Max 0.7 mm (with overlap > 0) / Max 1.4 mm (with overlap < 0) Max. paper pile: 6 cm (depending on sheet length) Thickness of laminating film: 24-50 μm; OPP, PET, Nylon Sheet overlap accuracy: ± 1 mm Feeder: Intelligent In-Line Feeding (connection with the PRinter) Laminating Unit: Nwjdpszb Db Hefx Amrok Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller with position control to move the snapping moment automatically when the position of decurler is changed. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk with adjustable air nozzles.

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 36AMG, compressed air connection: 6 bar, working width: 360 mm, warranty duration: 12 months, operating speed: 250 mm/s, Komfi Laminator Amiga 36B (Bottom Suction Feeder) New, Manufactured 2024 Specifications: Max. speed of lamination 15 m/min Min. sheet dimensions 20 × 20 cm Max. sheet dimensions 36 × 70 cm Paper weight/Paper thickness 115-350 g/m² / max 0.5 mm (with overlap > 0) / max 1 mm (with overlap < 0) Max. paper pile 6 cm (depending on sheetlenght) Thickness of laminating film 24-50 μm Njdpfx Aozh N Dlomrewk Kind of laminating film OPP, PET, Nylon, PVC Time of laminating roll warm up Approx 3.5 min Sheet overlap accuracy ±1 mm Machine dimensions incl. table 230 × 79 × 152 cm Air supply requirements Min. 6 bar Consumption of compressed air 20 l/min Max. consumption of compressed air 30 l/min Max. pressing force 12.8 kN = 1.3 ton-force Max. linear nip pressure 35,5 N/mm Max. consumption of electricity 6 kW Power supply 6 kVA Machine weight 332 kg Recommended machine capacity 100 000 sheets/month Feeder: Bottom Suction Vacuum Feeder Laminating Unit: ”On-the-fly” side-adjustable unwinding shaft with adjustable brake force. Height-adjustable and removable spread roller perfectly removes wrinkles from laminate. IR heating for laminating cylinder. Temperature sensor inside the cylinder for precise regulation. Rubber coated pressure roller. Adjustable distance stoppers for lamination unit to enable processing thick substrates and windows lamination. The powerful pneumatic pressure system guarantees even nip pressure and perfect lamination results. Separator & Delivery: Decurling unit consisting of bar and roller elements to reach flat result also for difficult thin or duplex sheets. Built-in film perforator to enable sheet separation. Cam-driven separation roller with adjustable tearing action, delivery roller and sheet skewing wheel. Fixed delivery desk.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 043804 / 55060428, No minimum price – guaranteed sale to the highest bidder! Two machines are offered for sale as a package: 1. Lapping machine Bierther ELAP700-91S 2. Oil mist separator Donaldson B.V.B.A. DMC-MMC Both machines have recently been inspected and certified by DGUV. Nwodpfxeztqxzj Amrsk Data for the BIERTHER ELAP700-91S: TECHNICAL DETAILS Diameter of lapping disc: 700 mm Inner diameter of truing rings: 275 mm Number of truing rings: 3 Rated speed: 56 rpm MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Mains connection: 3P + N Fusing: 16 A Current consumption: 8 A Motor power: 2.2 kW Power of lapping compound pump: 55 W Sound pressure level: < 70 dB(A) Tank capacity: 10 l Compressed air connection: 4 bar Dimensions & Weight Dimensions (L x W x H): 1,200 x 1,200 x 1,900 mm Height without pneumatics: 1,400 mm Weight without pneumatics: 750 kg Total weight: 900 kg EQUIPMENT Crossbeam for forklift attachment DGUV-certified Data for the DONALDSON B.V.B.A. DMC-MMC: TECHNICAL DETAILS Air volume flow rate: 2,000 m³/h MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): 1,600 x 670 x 2,000 mm Weight: 200 kg EQUIPMENT DGUV-certified

Condition: used, functionality: fully functional, mileage: 339,027 km, power: 338 kW (459.55 HP), first registration: 07/2022, fuel type: diesel, overall weight: 8,510 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features I-See Predictive Cruise Control - Map based topography information Cab: Globetrotter XL Battery system type: Single energy battery system (2 batteries) Engine & Turbo Package: D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR Gearbox: I-shift Automated 12-speed - GCW 60 tonne Automatic transmission manual shift options: Standard transmission shift - I-Shift or Powertronic Volvo Engine Brake - Retardation D13K-375kW/D16-500kW Advanced Emergency Brake System AEBS Driver attention support Driver comfort Cab Climate Unit: Electrically controlled air conditioning with carbon filter, sun, mist, and air qu Driver Seat: Comfort 5: suspended & heated - belt in seat Passenger seat: Comfort 5: suspended & heated - belt in seat Top bunk: Height adjustable foldable top bunk 700 x 1900mm Lower bunk: Lower manual recline bunk 815mm wide in the centre Aux. cab heater: 1.8kW Air to air Refrigerator: 33 litre under bunk mounted fridge / freezer with dividers Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front Axle Tyre Size: 315/70R22.5 Drive Axle Tyre Size: 315/70R22.5 Nwsdszlcn Sopfx Amrek Fifth Wheel Type: Jost JSK 37 cast fixed or sliding fifth wheel Wheelbase: 3800 mm Drive Axle Ratio: 2.31:1 Fuel tank - RHS: 610 LITRE, RIGHT SIDE FUEL TANK Fuel tank - LHS: 650 LITRE, LEFT SIDE FUEL TANK Plastic AdBlue Tank: 65 litre under/behind cab Cruise Control: Eco fleet software - with speed 85, I-See and push button I-shift Technology Secondary Information Display: Secondary colour information display FMS gateway: FMS gateway for Fleet Management System Exterior Headlamps: LED headlamps Daytime Running Lights: V-shaped Front fog lamps: Front fog lights - white Cornering lights: Static corner lights - works with indicator at low speed to light up direction Air Deflector - Roof: Roof air deflector Side air deflector: Cab side air deflector - long tractor Cab Exterior Trim Level Enhanced Complete painted finish - Main Grille, handles, mirrors, bumper in cab colour Side skirts on fuel tanks Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, functionality: fully functional, mileage: 176,345 km, power: 368 kW (500.34 HP), first registration: 07/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Nodszmb Dhjpfx Amrowk Cabin type: Globetrotter XL Volvo FH 500 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne NEW D13K500 diesel engine, 500hp, 2500Nm SCR and EGR Batteries: 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI Step E Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with sun sensor Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.5 tonne Retarder: NO ACC - Adaptive cruise control: YES I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with adaptive cruise control and AEBS advanced emergency brake system Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 65 litre under/behind cab Additional roof lights: Without Tyres: 315/70R22.5 Technology Infotainment System GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: no Automatic - LED headlights Roof lights: without Side skirts on fuel tanks Roof air deflector Cab Enh Exterior Trim Levels: Enhanced complete paint - Main Grille, handles, mirrors, bumper in cab colour Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets. New price currently around €250,000. Description: Complete system for dosing and packaging dry ice pellets. Fully automated process with high capacity and reliability. Advantages: Additional information about the bagging machine. System Dimensions: The entire system is 6 meters long, 3.20 meters high, and approximately 1.20 meters wide. The round turntable (disc) has a diameter of 1.5 meters. The system does not need to be installed in a completely straight line. The system can be rotated 90 degrees in two sections, creating a U-shape. This allows the machine to be installed in smaller spaces without affecting its operation. The height of the system is not adjustable. Machine Output: The machine has a capacity of approximately 500 kg per hour. Dimensions and Weight of the Bags: The bag sizes can be fully adjusted to your needs. This ranges from small bags of approximately 750 grams to larger bags of 20 kg. This can be flexibly adjusted to meet your production needs. Maintenance Costs: Nwedpfjw Ttxfox Amrjk The average annual maintenance cost, excluding materials and call-out charges, is between €1200 and €1500 per year. Worldwide Shipping. Cold Jet Prime 600, Cold Jet Prime600, Cold Jet dry ice dosing & bagging system, dry ice dosing machine for sale, dry ice bagging machine for sale, dry ice production machine, dry ice production machine for sale, dry ice dosing and packaging system, automatic dry ice dosing machine, automatic dry ice bagging system, dry ice pellet production & packaging, dry ice packaging equipment, industrial dry ice production system, dry ice pellet production machine, dry ice pellet making equipment, dry ice pellet packing machine, pelletizer & bagging system, dry ice pelletizer bagger, cryogenic dry ice production equipment, CO2 dry ice production machine, dry ice manufacturing system, dry ice production & dosing system, used dry ice dosing machine, used dry ice production machine, refurbished dry ice machine, dry ice supply system, high-capacity dry ice production system, automatic CO2 pellet bagger, liquid CO2 to dry ice converter, dry ice bag filling machine, dry ice packaging automation system, industrial packaging machine for dry ice, high-output dry ice system, adjustable bag size dry ice, dry ice buffer tank system, 500 kg/h dry ice production, worldwide export dry ice machinery, industrial dry ice packaging, cold chain dry ice packaging equipment, food-grade dry ice packaging machine, logistics dry ice dosing & bagging, dry ice dosing & shipping solution, dry ice dosing system Netherlands, dry ice dosing system Noordwijkerhout, DrDryice, dry ice production equipment Europe, cryogenic pellet production systems, dry ice manufacturing equipment for sale, dry ice production line, dry ice pelletizer PR series, integrated dry ice dosing systems, industrial CO2 pellet production, dry ice automation system, dry ice bagging & dosing automation, high-reliability dry ice machine. DrDryice.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 6,608 h, load capacity: 400 kg, empty load weight: 5,512 kg, fuel type: electric, PB lifttechnik S171-16E. Year of manufacture: 2020. Operating hours: 6608. Working height: 17.3 meters. Platform capacity: 400 kg. Nwedpfx Aezp Sitjmrsk 48-volt battery in good condition, with a 230-volt charger. Non-marking tires for indoor use. The aerial platform is in good optical and technical condition. Video available via WhatsApp. Calling or sending a WhatsApp message is always faster. Price is net plus 21% VAT or net for export. We are open to your price offer! Our general terms and conditions apply to all transactions! Machines are sold EX Works Winterswijk (Netherlands) in as-is condition!

Condition: good (used), mileage: 17,207 km, power: 84 kW (114.21 HP), first registration: 10/2024, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,660 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, total length: 6,080 mm, total width: 2,020 mm, total height: 2,740 mm, loading space length: 3,320 mm, loading space width: 1,780 mm, loading space height: 1,920 mm, Year of construction: 2024, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Halogen lamp - None - Air conditioning - Manual - Radio/cassette - Rear view camera - Lane keeping assist - Blind spot sensor - Partition = Notes = Number of axles: 2, Configuration: 4x2, Unladen weight: 2494 kg, Gross vehicle weight: 3200 kg, Tow hitch, Type of cab: Single cab, Cruise control, Number of airbags: 2, Parking assistance: None, Electric windows, Electric mirrors, Partition, Radio/cassette, GPS navigation, Color: White, Rear view camera, Lighting type: Halogen lamp, Lane keeping assist, Air conditioning, Bluetooth, Blind spot sensor, Engine power: 84 kW (113 hp), Fuel: Diesel, Euro: 6, Drive technology: Timing chain, Gearbox type: Manual, Power steering, ABS, ASR, Starter battery, Body type: extended and raised, Side paneling, Roof rack: None, Side doors: 1, Rear closure: Double door, Central locking, Number of seats: 3, Seat configuration: 1+2, Seat cover: Leather, Seat adjustment: Manual, MBUX | RWD | Camera | Cruise Control | New Model | Tow Hitch | Multifunction steering wheel |, Spare wheel, Tire type: Summer tires = Further Information = General Information Number of doors: 1 License plate: KLEYN1 Axle Configuration Tire size: 235/65R16 Brakes: Disc brakes Suspension: Leaf spring suspension Axle 1: Tire tread left: 6 mm; Tire tread right: 5 mm Axle 2: Tire tread left: 4 mm; Tire tread right: 4 mm Weights Unladen weight: 2,494 kg Payload: 706 kg GVWR: 3,200 kg Functional Loading area height: 61 cm Interior Upholstery: Leather Nodpfx Amjzuk Hnsrewk Maintenance APK (Technical Inspection): valid until 10.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: 482 € per month (delivery van, 72 months); Please inquire about further information and conditions.

Condition: used, functionality: fully functional, mileage: 338,510 km, power: 353 kW (479.95 HP), first registration: 02/2024, fuel type: diesel, overall weight: 8,088 kg, axle configuration: 4x2, wheelbase: 390 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,419 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features MAN EfficientCruise 3. Large cab capacity with mid-height roof GX. Battery, 12 V, 230 Ah, 2 units, maintenance free. Diesel engine MAN D2676 LFAY, 353 kW (480 hp) output, 2,450 Nm torque, Euro 6e. MAN TipMatic Efficiency Plus driving program, without kickdown function Advanced Emergency Brake Assist (EBA). Adaptive cruise control - ACC Driver comfort Air-conditioning system, Climatronic. Comfort driver’s seat, air-sprung, with lumbar support and shoulder adjustment. Comfort co-driver’s seat, air-sprun. Bunk, top, with slatted support. Bunk, bottom, with slatted support. Auxiliary water heater 4 kW (night heater). Fridge and drawer, 1 unit, centre area, to rear. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Multi-function steering wheel, adjustable height and angle. Front axle tyres - 315/70 R22.5. Rear axle tyres - 315/70 R22.5. JOST JSK 37 C 2" fifth-wheel coupling. Main wheelbase, 3900 mm. Fuel tank capacity 580 l, left, alum. AdBlue tank capacity 80 l, left, plastic. Fuel tank capacity 580 l, right, alum. Maximum speed limiter, 89 km/h, tolerance +1 km/h, electronic, engine speed regulation. Technology MMT infotainment system, Advanced Mid. MAN TeleMatics. Exterior Front headlights, LED. Daytime driving lights, LED. Fog lights, LED. Contour lights, bulb, 2 units Roof spoiler, 600 mm adjustment range. Side flaps, left folding and right fixed. Tyres Information Front left - 12 mm Front right - 13 mm Rear left inner - 11 mm Rear left outer - 10 mm Rear right inner - 13 mm Nodpfozuwrqex Amrswk Rear right outer - 12 mm

Condition: excellent (used), REF: MM6174 1 x Machinery Automation Ltd Capping line Nwedsw E Ey Topfx Amrok Technical specification: ✅ Manufacturer - Machinery Automation Ltd ✅ Model - MA-CET70 Capping Line. ✅ Cap Types - Screw Cap, Jar, Foamer, Dropper, pre-formed ROPP. ✅ Cap Diameters - 18 – 70mm (extended to 90mm). ✅ Bottle Height - 30 – 300mm Notes: This has been built for glass jars, which include a 43mm cap, a 53mm cap, 73mm cap and 70mm cap. There are 4 x change parts with the elevator to suit these and the capper gets adjusted to suit without any change parts.

Condition: good (used), Year of construction: 2008, functionality: fully functional, A weighing system previously used for packing hard-boiled sweets, but suitable for all manner of snack foods, confectionery, nuts, seeds, etc. Features the following equipment: 1 x AST-2-1 stainless-steel hopper and vibratory feeding pan with manual gate. Hopper internal dimensions - 795mm long x 795mm wide. Overall dimensions - 1100mm long x 880mm wide x 1150mm high. 1 x AST-3-5 stainless-steel bucket elevator. Each bucket dimensions - 380mm long x 115mm wide x 60mm high. Overall dimensions - 2650mm long x 680mm wide x 3400mm high. 1 x A10 -10-head multi-head weigher with touch-screen control panel and 1.6L smooth weighing pans. Programmable for up to different 50 programs. 1 x Stainless-steel gantry with height-adjustable feet and wheels. Overall dimensions - 1220mm wide x 1320mm deep x 1680mm high. Nwodpfx Amozaw Nusrjk Overall footprint of system (in current setup) - 3.7m long x 2m wide x 3.4m high.

Year of construction: 2017, condition: excellent (used), REF: MM6476 1 x 2017 Packaging Automation Ltd Eclipse SL4 inline heat-sealing machine supplied with 1 x Packaging Automatic Ltd Eclipse C1 automated chain-and-peg conveyor system, 2 x interchangeable sets of tooling and some spare parts. Previously used to heat seal punnets of cauliflower and cauliflower/broccoli mix from multi-head weigher. Both machines on height adjustable feet. The Eclipse SL4 is a fully automatic inline tray-sealing machine designed for high-throughput food packaging applications. Suitable for sealing a wide range of pre-formed trays, the machine is ideal for use within the meat, poultry, seafood, ready meal, fresh produce, bakery, and convenience food sectors. The automated conveyor system provides continuous product handling, helping to improve production efficiency and throughput. Specification: Nedpfx Ajzrg T Ejmrowk Model of inline heat sealer - Eclipse SL4. Serial number - EC34-MC-00100. Model of indexing inline conveyor – Eclipse C1. Date of manufacture - 2017. Tooling - 2 x sets. Set 1: 4 x 1 format with arms. For punnets (double section) measuring 261mm L x 166mm W x 55mm D. Set 2: 4 x 1 format with arms (single punnet - in machine) measuring 177mm L x 140mm W x 55mm D. Eclipse C1 infeed conveyor belt (modular plastic belt section) - 300mm wide. Outfeed conveyor belt - 290mm wide, blue rubber. System footprint: Eclipse C1 indexing conveyor footprint - 3870mm L x 950mm W x 1050mm H. Eclipse SL4 inline sealer footprint - 3230mm L x 1050mm W x 2050mm H. Condition – Very good. This system was purchased new and run for approximately 6 months per year. Supplied with various spare parts, including cutters for both sets of punnets, spare belts, heater pads, etc. *Please note* - None of the following equipment pictured is included in the sale: multi-head chutes with sensors feeding the C1 infeed conveyor AND thermal transfer coder mounted on Eclipse SL4 inline sealer.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, total length: 1,250 mm, total height: 1,900 mm, total width: 2,000 mm, overall weight: 1,850 kg, No minimum price – guaranteed sale to the highest bidder! Lease return due to factory closure. Machine for the automatic and precise separation or singulation of printed circuit boards from a PCB panel. MACHINE DETAILS New price 2024: €149,000.00 net Processed printed circuit boards: 42,680 pieces Dimensions of pallet (L x W x H): 1,250 x 2,000 x 1,900 mm Machine weight: approx. 1,850 kg EQUIPMENT Cutter diameter control Wear parts package DIVISIO Automatic transport width adjustment SMEMA transport height Separation module, shank cutter 500 W Hardware module, camera Software module, teach function for camera Software module, fiducial mark recognition Extension, 8-position tool changer Extraction hose, manual Monitoring of suction power ASYCAM CAD data conversion A Adrep Offset main switch ESD energy chains and P-hoses, standard Packaging size, group 3 pallet • The height and weight of the asset must be taken into account when selecting the transport vehicle. • A forklift is available for loading. Nwsdpfx Ajzvb I Eomrek • If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. • The sale is made without any guarantee or warranty. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends.

Condition: new, Product driven flow divider The filling flow divider can be used for several kind of products like meat, fish, pasta products, sauces and salads. Includes 1 nozzle per exit (round, square, triangular or rectangular) with a maximum outer diameter of 40 mm Product temperature up to ± 80 °C Nedpszvcqnsfx Amrowk With universal connection With pneumatique knife 3 exits belt width 25 cm With support frame in height adjustable New

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: AA1/017825, functionality: fully functional, travel distance X-axis: 5,200 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 160 mm, number of axes: 5, number of slots in tool magazine: 12, TECHNICAL DETAILS Number of controlled axes, milling spindle: 5 Tool holder: HSK-F63 Type of milling table: Cross table Tool changer positions: 12 Working area, X-axis: 5,200 mm Working area, Y-axis: 1,550 mm Working area, Z-axis: 160 mm MACHINE DETAILS System/Software: SCM Maestro Vacuum pump Manufacturer: Becker Type: VTLF 2.250/0-791 Year of manufacture: 2014 Main motor power: 5.5 kW Capacity: 244 m³/h Negative pressure: 200 mbar Overall length: 9,000 mm Nedpfx Aszuwt Uomrewk Overall width: 5,000 mm Overall height: 3,100 mm EQUIPMENT Vacuum pump Becker VTLF 2.250/0-791 Manual control CNC documentation on USB stick Safety light curtain Safety fence CE certificate Documentation