Used Plc Processor for sale (2,730)

Condition: new, High-performance Firewood Processor with 20 Tons of Splitting Force - Brugger SA48 Pro! The Brugger SA48 Pro log splitter is the perfect solution for quickly and effortlessly processing logs with a diameter of up to 48 cm into high-quality firewood. Its well-thought-out yet simple design distinguishes this machine, which not only requires low maintenance but also facilitates repairs. This impressive device is equipped with either a powerful 14 HP Kohler petrol engine or a 9.5 kW 400V electric motor. The SA48 Pro does not rely on electronic control but is operated purely by mechanical components such as hydraulic valves with levers. Specifications: Maximum cutting length: 55 cm Maximum diameter: 48 cm Splitting force: 20 tons 55 cm bar Extra-wide 3.2 m conveyor belt Hydraulic feed up to the chainsaw Pivoting conveyor belt Automatic chain lubrication Despite its high splitting force and large diameter capacity, the log splitter remains relatively compact. Equipped with a drawbar, it can be attached to any trailer hitch, allowing for easy transportation. Additionally, two people can easily move the log splitter by hand on a flat surface without the need for a vehicle. The length of the firewood can be adjusted continuously up to 55 cm. The splitting wedge can be manually adjusted in different positions using a lever, allowing for 2-way, 4-way, or even 6-way splitting, depending on the thickness of the wood. Optional equipment such as the log lifter or chain conveyor further facilitates the work process. The chain conveyor allows for loading multiple logs using a forklift, crane, or front loader, eliminating the need to lift one log at a time. Prices: Knjdpfxspz I Nco Afwja Brugger SA48 Pro: €9,749 6-way knife: €199 8-way knife : €299 Additional PTO drive (for electric or gasoline): €949 Log lifter: €1,498 Chain infeed log deck: €1,898

Condition: new, High-performance Log Splitter with 20 Tons of Splitting Force - Brugger SA48 Pro! The Brugger SA48 Pro log splitter is the perfect solution for quickly and effortlessly processing logs with a diameter of up to 48 cm into high-quality firewood. Its well-thought-out yet simple design distinguishes this machine, which not only requires low maintenance but also facilitates repairs. Knsdpfx Aolu Dc Nefwea This impressive device is equipped with either a powerful 14 HP Kohler petrol engine or a 9.5 kW 400V electric motor. The SA48 Pro does not rely on electronic control but is operated purely by mechanical components such as hydraulic valves with levers. Specifications: Maximum cutting length: 55 cm Maximum diameter: 48 cm Splitting force: 20 tons 55 cm bar Extra-wide 3.2 m conveyor belt Hydraulic feed up to the chainsaw Despite its high splitting force and large diameter capacity, the log splitter remains relatively compact. Equipped with a drawbar, it can be attached to any trailer hitch, allowing for easy transportation. Additionally, two people can easily move the log splitter by hand on a flat surface without the need for a vehicle. The length of the firewood can be adjusted continuously up to 55 cm. The splitting wedge can be manually adjusted in different positions using a lever, allowing for 2-way, 4-way, or even 6-way splitting, depending on the thickness of the wood. Optional equipment such as the log lifter or chain conveyor further facilitates the work process. The chain conveyor allows for loading multiple logs using a forklift, crane, or front loader, eliminating the need to lift one log at a time. Prices: Brugger SA48 Pro: €9,749 6-way knife: €199 8-way knife: €299 Additional PTO drive (for electric or gasoline) : €949 Log lifter: €1,498 Chain conveyor: €1,898

Condition: new, The Brugger SA38 impresses with an impressive splitting force of 12 tons and is the ideal solution for the quick and uncomplicated transformation of tree trunks into high-quality firewood. Logs up to 38 cm in diameter can be transformed into firewood with ease. The SA38 is characterized by its simple yet sophisticated design, which not only ensures high reliability, but also facilitates maintenance and repairs. Technical data - Up to 38cm diameter - Splitting power of 12 tons - 50cm Oregon sword - Log length from 20 - 50cm - Optional log lifter or chain conveyor - Weight 450kg Knjdpfxopz I I He Afwja Depending on your individual requirements, various drive options are available, a powerful 14 HP Kohler gasoline engine, a 7.5 kW 400V electric motor or a PTO drive with three-point linkage. Prices Brugger SA38 - 5.499€ infeed conveyor 100cm - 590€ discharge conveyor 350cm - 895€ 6-way splitting knife - 199€

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 25680 € 490.49 € Schwenkrahmen 3270x27x0,9 mm 35/70 (PLC) m/min 20-100 (CNC/Touch) m/min 300 mm 240 mm 420x200 mm rund 240 mm, quadrat 230 rund 170 mm, quadrat 170 220 mm 835 mm 0.37 kW 0.12 kW 3220 mm 2050 mm 1900 mm 1090 kg VERSION PLC: adjustment of material feed by handwheel, counter and limit switch VERSION CNC:feed lenght and numbers by CNC (99 progamms) VERSION TOUCH: as CNC but with 7" touchscreen for easier operation automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp automatic feed 800 mm/stroke chip conveyer (CNC/Touch) variable cutting pressure Machine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch) cutting fluid system automatic saw blade breakage detection hydraulic vices suggested max. diam. in automatic mode for full material: 150 mm maerial chute user manual in GERMAN ALTERNATIVES: Model 420ACNC Kjdoynm Snopfx Afwona € 31.700,00 Model 420ATouch € 33.750,00

Condition: new, neu ca. 10 Wochen ab Auftrags Italien 17770 € 341.18 € Schwenkrahmen 3010x27x0,9 mm 35/70 (PLC) m/min 20-100 (CNC/Touch) m/min 260 mm 240 mm 330x120 mm rund 200 mm, quadrat 190 rund 120 mm, quadrat 115 220 mm 835 mm 0.37 kW Knodewiqpuopfx Afwea 0.12 kW 2800 mm 2050 mm 1900 mm 1090 kg VERSION PLC: adjustment of material feed by handwheel, counter and limit switch VERSION CNC:feed lenght and numbers by CNC (99 progamms) VERSION TOUCH: as CNC but with 7" touchscreen for easier operation automatic cutting cycle clamping, saw blade and cutting fluid on, cutting operation, saw blade and cutting fluid off, fast return stroke, declamp automatic feed: PLC 800 mm/stroke, CNC/Touch: 600 mm/stroke variable cutting pressure. Machine with 2 cutting speeds (PLC) orspeed variator (CNC/Touch) cutting fluid system automatic saw blade breakage detection hydraulic vices material chute chip brush suggested max. diam. in automatic mode for full material: 150 mm user manual in English or German ALTERNATIVES: Model 330 AE CNC € 20.490,00 Model 330 AE Touch € 22.600,00

Condition: used, functionality: fully functional, Leica ASP300 Automated Vacuum Tissue Processor. This advanced solution combines cutting-edge features and a user-friendly interface, redefining routine clinical and research histopathology applications. With an innovative touch-screen display, smart reagent compatibility monitor, and customizable cleaning programs, the ASP300 ensures optimal processing conditions and sample quality. Enhanced security, remote fill and drain capabilities, and a maximum capacity of 300 cassettes guarantee efficiency and reliability. Discover an intuitive user experience through the solvent-resistant color touch-screen display of the Leica ASP300. Its user-friendly interface guides you seamlessly through each step, ensuring hassle-free operation. The graphical process representation displayed on the touch-screen adds a visual dimension to your workflow, enhancing clarity and control. Knjdpfxsupv Nks Afwoa Experience the innovative reagent compatibility monitor that ensures your reagents are perfectly suited for the task, minimizing errors and maximizing efficiency. Instrument performance control (QC) is integrated to maintain top-notch performance standards, guaranteeing consistent results with each processing cycle. The ASP300 Tissue Processor introduces a remote fill and drain system, further simplifying your laboratory operations. With four pressure vacuum options – P/V, P, V, and ambient – you have the flexibility to choose the ideal setting for your specific needs, optimizing processing conditions. Customize your workflow with four user-defined cleaning programs, adapting the processor to your laboratory’s requirements. The active paraffin cleaning program ensures the longevity of your paraffin, prolonging its service life and enhancing cost-efficiency. Good working condition. Please check out our other listings as well.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: S40Basic, Compact size, high productivity vegetable processing machine: ​ The commercial vegetable processing machine, cabbage shredder S40 is a productive, compact size commercial food processing machine that is intended for cabbage shredding, slicing, High productivity 500-1000 kg/h, high-quality materials as food-grade stainless steel AISI 304. Made for small and middle-size producing companies. General Features: Productivity 500-1000 kg/h; High quality, long-lasting stainless steel cutting knives (up to 100 tons Kodpfsffwgvox Afwona between sharpening); Disc diameter of 40 cm, grants, that you can cut small cabbage heads that are sliced in half. Universal cutting machine, very good for slicing, grating, mashing, julienne stick cutting; (additional attachments) Compact size, can be equipped with wheels and easily transported; Easy to clean, can be washed with low-pressure water; All food contact elements made of stainless steel; Powder painted frame, three-layer lacquer in the standard version, or full stainless steel version(additional option) Machine motors 0.75kW in the ​standard version Electric connection 400/220/120 Volts, 50-60 Hz. For different connections, please, ask

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: Alistar AF166, Multifunctional vegetable processor S55 2000-4000kg/h The Vegetable Processing Line S55 is a versatile and efficient solution for processing various vegetables and fruits. Its productivity range is from 2000 kg/h to 4000 kg/h, making it suitable for medium—to large-scale operations. Knsdpodwlfkefx Afwja

Year of construction: 2026, condition: new, machine/vehicle number: Al160, Compact size, high productivity food processing machine: Vegetable processor is a productive, compact-sized commercial cabbage shredding machine that is intended for cabbage shredding, slicing, grating, as well as beets, carrots grating, and julienne cutting. High productivity 500-1000 kg/h, high-quality materials as food-grade stainless steel AISI 304. Made for small and medium-sized producing companies. General Features: Ksdpfx Afsdwfdqewona • Productivity 500-1000 kg/h; • High quality, longlasting stainless steel cutting knives (up to 100 tons between sharpening); • Disc diameter of 40 cm, grants, that you can put whole or cut in half small cabbage heads; • The universal cutting machine, very good for slicing, grating, mashing, julienne stick cutting; • Compact size can be equipped with wheels and easily transported; • Easy to clean, can be washed with low-pressure water; • All food contact elements made of stainless steel; • Powder-painted frame, three-layer lacquer in the standard version, or full stainless steel version • Machine motors can be adjusted as required up to 2200 W. • Electric connection 400/220/120 Volts, 50-60 Hz. For different connections, please ask;

Condition: new, functionality: fully functional, grinding length: 510 mm, grinding width: 250 mm, Reduced slip-stick effect thanks to plastic-coated x and y-axis guides. The longitudinal table guide is flat, while the transverse guide is triangular. Radial and axial forces are evenly distributed on special backlash-free bearings in the grinding spindle head. A separate hydraulic unit with heat exchanger prevents vibration and overheating. High stability thanks to ribbing and dimensioned wall thicknesses. Digital control of automatic vertical feed with servomotor. The hydraulic system ensures smooth table movement, even under heavy load. Rapid approach to workpiece height, automatic lifting after completion of the work cycle. Adjustable longitudinal and vertical table feed via end stops. PLC models are equipped with SIEMENS PLC controllers and touchscreens. Technical specifications: Table clamping surface width: 510 mm Table clamping surface depth: 250 mm T-slots (quantity/width): 1 / 14 mm Electromagnetic table size: 250 x 500 mm Longitudinal travel (x): 560 mm Transverse travel (y): 275 mm Kodpsyt Hzmofx Afwona Max. spindle axis-to-table distance: 450 mm Max. table load: 180 kg Grinding wheel size: 200 x 20 x 31.75 mm Hydraulic table feed speed: 5 - 25 m/min Grinding spindle speed: 2850 rpm Grinding spindle motor power: 2.2 kW Hydraulic pump motor power: 0.75 kW Vertical feed motor power: 0.5 kW Total motor power: 3.45 kW Voltage: 400 V Dimensions (W x D x H): 1900 x 2050 x 1840 mm Weight (approx.): 1750 kg Transverse feed (Y): Automatic transverse feed: 0.5 - 8 mm/stroke Rapid transverse feed: 990 mm/min Transverse feed per handwheel revolution: 4 mm/rev Graduation on handwheel (Y): 0.02 mm Vertical feed (Z): Automatic vertical feed: 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm/stroke Rapid vertical feed: 480 mm/min Vertical feed per handwheel revolution: 2 mm Graduation on handwheel (Z): 0.005 mm

Year of construction: 2023, condition: new, Ultrasonic cleaner with PLC, specially designed for medical needs. Capacity: 50 Liter Automatic filling: Available Kodpfxefg Eqwj Afwena Automatic dosing: Available Lid: Pneumatic piston Programmable: Yes with PLC Liquid level control: Available ultrasonic cleaner, ultrasonic degreasing machine, ultrasonic washer, small ultrasonic washing machine, medical ultrasonic cleaner, automative

Year of construction: 2026, condition: new, machine/vehicle number: 1234, Mobile fruit and vegetable processor unit Specifications: -Performance: end product 300 L/h maximum -Input capacity: 300kg/h -Electric demands: 10 kW, 400 V -Heating performance: 30 kW -Fuel: propane, PB, natural gas -Flue gas outlet: 60/100mm concentric chimney -Material: WNr. 1.4301, AISI 304 stainless steel -Dimensions: 6100x2200x2800 mm -Weight: ~2,3 tons (depends on the accessories and options) -IP65 certified electronics -Heat exchanger: soft water -Connections: DN 25 BUILT-IN MACHINES: -Custom made washer with grinder (openable, tiltable) -MKSP 300 belt press (automatic) -MKT 100 juice collector tank with pump (automatic) -Puffer tanks -MKPAG 300 gas fuelled pasteurizer (automatic) -BB TOP 180 semi-automatic filler or Bottle filler with 2 heads -Air compressor -High pressure washer Galvanized steel chassis with aluminium anti-slip floor, and aluminium superstructure. The two sides and the rear side is openable in 90° angle. The openable washer recieves the fruits. After the grinding and pressing, the automatic juice collector towards the juice to the puffer tanks. Then the automatic pasteurizer does the heat treatment, and in the final step, the operator fills the end product in bags or bottles. The machine is as automatic as possible, it needs only 2 workers to operate. Very easy to clean. Requires minimal maintenance. Knjdpfx Afsiu Hz Howsa Options: -Diesel generator (10kW) -3,2 tons trailer -300L freshwater tank -300L waste water tank -Filtration system -Tent system -Custom graphic design on the outer surface

Condition: used, functionality: fully functional, Gilson HPLC Moduls. Includes: 4X Gilson 119 UV/VIS Detector Gilson 832 Temperature Regulator Gilson 305 Pump Gilson UV/VIS-156 Gilson 832 Temperature Regulator Gilson 811D Dynamic Mixer Gilson 805 Manometric Module Gilson 307 Pump Gilson 117 UV Detector Knsdpfx Asuaxm Sofwea Other components Good working condition. Please check out our other listings as well.

Year of construction: 2019, condition: good (used), Waters Alliance e2695 HPLC system with a 2489 UV/Vis detector. The system was operated in a regulated GMP environment and underwent annual inspection and preventive maintenance by an independent German inspection organization and Waters. Year of manufacture: 2019 First put into service: 2020 Condition: Used Inspection and live demonstration available by appointment. Worldwide shipping can be arranged. Knjdpfxezmv N So Afwea

Year of construction: 2019, condition: good (used), Waters Alliance e2695 HPLC System with 2998 PDA Detector Ksdpfx Afezmv A Sewsna The system was operated in a regulated GMP environment and underwent annual inspection and preventive maintenance by an independent German inspection organization and Waters. Year of manufacture: 2019 First put into service: 2020 Condition: Used Inspection and live demonstration available by appointment. Worldwide shipping can be arranged.

Condition: used, HPLC Waters The system consists of the following modules and components: HPLC Waters Binary Solvent Manager HPLC Waters Auxiliary Solvent Manager HPLC Waters HDX Manager HPLC Waters Pal System HPLC Waters Leap Synapt HDMS Mass Spectrometer HPLC Waters Binary Solvent Manager Flow Control Modules Flow rate of 0.20 to 5.00 µl/min Solvents are mixed in the T-piece outlet of the flow control module. Auxiliary solvent manager Flow rates of 0.10 to 5.00 µl/min. Flow control module Flow rate of 0.20 to 5.00 µl/min Sample manager The sample manager injects the samples, which it draws from microtiter plates or vials, into the chromatographic flow stream. In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard wash, or it can do so in less than 60 seconds, including a double standard wash. The sample manager accepts plates with standard footprint, 5.03” x 3.365”, which correspond to SBS/ANSI-compliant plates (maximum height of 2.2 inches, including covers). The sample manager can store samples at any temperature between 4 and 40 °C (39 and 104 °F) under ambient conditions of 25 °C (77 °F) or less. Heating and capture module Inner diameter of up to 300 micrometers and a length of 250 mm Temperatures from 5 °C (9 °F) above ambient temperature to 65 °C (149 °F). The column base can be pivoted outwards into any position between 0° and 180°. In the 0° “home” position, the column base is located directly above the sample manager and can be connected to an optional optical detector. In the 180° “away” position, the analytical column can be connected to a mass spectrometer Knedpfx Afezg Tzxowoa (on the right side of the system). The Synapt G2 is a Q-TOF-based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of the ions based on their shape and conformation. Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used not only for peptide identification (LC-MSE data-independent acquisition), but also for denaturation and native MS analysis. Documents & Downloads Data sheet: Operating manual Condition: used Scope of supply: (See image) (Changes and errors in the technical data, information are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: new, Year of construction: 2024, Everything can be configured according to your needs, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Steel welded construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek software with automatic nesting Position determination of the sheet to be cut using a laser DURMA torch height control Double-sided drive system (rack and pinion) AC servomotors for movement in the X and Y axes CNC control outputs/inputs for the filter unit Consumables starter kit Plasma torch * Ignition console * Torch height control with Ball screw spindles on double Ksdpjfiqgrefx Afwena Linear guides * Optional equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch CE standard safety wire Automatic gas console for Hypertherm Manual gas console for Hypertherm Oxy-fuel cutting torch Plasma torch protection system Manual plasma angle cutting head CNC angle cutting head (+/- 45) Single drilling head Multi-drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning light for errors and program end With over 60 years of experience in the research and production of machines for sheet metal processing, with 8,000 machines produced annually in three technologically advanced manufacturing facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our showroom offers you the opportunity to gain an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our mission is to be your direct point of contact on site and to offer you services related to training and customer service. We are now happy to support you from Germany – from consulting to purchasing and throughout the entire life cycle of your machine. With our German branch, we are always there for you, so that we can react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions in sheet metal processing.

Condition: new, Year of construction: 2024, Everything is configurable upon request, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Steel welded construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek software with automatic nesting Position determination of the sheet to be cut using a laser DURMA torch height control Double-sided drive system (rack and pinion) AC servo motors for movement in the X and Y axes CNC control outputs/inputs for the filter unit Consumables starter kit Plasma torch * Ignition console * Torch height control with Ball screws on double Linear guides * Optional equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch HPR 260 XD + hose package + nozzles + Durma THC + ignition console + Hypertherm torch + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch CE standard safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Oxy-fuel cutting torch Plasma torch protection system Manual plasma bevel cutting head, CNC bevel cutting head (+/- 45). Kjdsfirx Topfx Afwsna Single drilling head Multi-drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning light for errors and program end D9hnyc97o With over 60 years of experience in the research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned manufacturers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact person from the Durmazlar team, who will competently assist you with advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to get an overview of our machines on site, to be convinced firsthand by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our task is to be your direct contact person on site and to offer you services relating to training and customer service. We would now like to support you from Germany – from advice to purchase and throughout the entire life cycle of your machine. With our German branch, we are always on site when you need us to be able to react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Year of construction: 2024, condition: new, Machine dimensions: • (L x W x H) 5,240 mm x 3,600 mm x 2,400 mm • Width with console: 7,700 mm • Length with filter: 11,000 mm Technical details: • Max. sheet size: 4,000 x 2,000 mm • Cutting speed: 12 m/min • Positioning accuracy: ± 0.1 mm • Repeatability: ± 0.1 mm • Power (Hypertherm XPR 170 XD Optimix): 170 A • Cutting range: • Unalloyed steel, piercing, argon: 40 mm • Unalloyed steel, piercing, air: 35 mm • Unalloyed steel, contour cutting: 60 mm • Alloyed steel, piercing: 22 mm • Alloyed steel, contour cutting: 38 mm • Aluminum, piercing: 25 mm • Aluminum, contour cutting: 38 mm Standard equipment: • Control system: Durma Aurora CNC controller • Truehole Standard • Sheet metal measurement using laser • Torch height control Kjdpfxedyfwko Afwsna • AC servo motors for X and Y axis • Software: Lantek or Metalix CAD/CAM software with autonesting • 50 pre-programmed part geometries for easy and quick modification • Consumable kit (torch nozzles, etc.) • Plasma torch • Ignition console • Remote control: remote maintenance Options include: • Hypertherm XPR 170 XD + Optimix + automatic gas control • Filter for HPR 170 XD • Safety system with surrounding safety wire • Oxy-fuel torch with sensor • Plasma torch – interruption system • Air dryer

Year of construction: 2024, condition: new, Everything can be configured according to your requirements; very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data available upon request. Standard equipment: Steel welded construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek software with automatic nesting Position determination of the sheet to be cut using a laser DURMA torch height control Double-sided drive system (rack and pinion) AC servomotors for movement in the X and Y axes CNC control outputs/inputs for the filter unit Consumables starter kit Plasma torch * Ignition console * Torch height control with Ball screw spindles on double Linear guides * Knsdpefirx Nefx Afwea Optional equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm HPR 260 XD + hose package + nozzles + Durma THC + ignition console + torch Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + torch CE standard safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Oxy-fuel cutting torch Plasma torch protection system Manual plasma angle cutting head, CNC angle cutting head (+/- 45). Single drilling head Multi-drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning light for errors and program end With over 60 years of experience in research and production of machines for sheet metal processing, producing 8,000 machines annually in three technologically advanced manufacturing plants with a total area of 150,000 m², the Durmazlar Group and its DURMA machines are now among the internationally renowned producers in its industry, whose products are distributed in 120 countries. With its branch in Staufenberg near Giessen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here, we are your direct contact within the Durmazlar Group, providing you with competent advice and support when it comes to sheet metal processing machines. Our demonstration center gives you the opportunity to get an overview of our machines on site, to be convinced up close by the quality and precise technology of our products, and to receive the best possible advice tailored to your company's goals. Our mission is to be your direct contact on site and offer you services related to training and customer service. We are happy to support you now from Germany - from consulting, through purchasing and throughout the entire service life of your machine. With our German branch, we are always available locally when you need us in order to react quickly and efficiently. Here, we are your reliable partner for technologically advanced solutions when it comes to sheet metal processing.

Condition: used, mileage: 180,089 km, power: 294 kW (399.73 HP), first registration: 02/2017, fuel type: diesel, tire size: 315/80r22,5, axle configuration: 8x4, wheelbase: 1,800 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 16, emission class: euro6, suspension: other, loading space length: 6,000 mm, loading space width: 2,450 mm, loading space height: 750 mm, Year of construction: 2017, Equipment: air conditioning, crane, electric window regulation, trailer coupling, Technical information Number of cylinders: 6 Engine capacity: 12.419 cc Drivetrain Drive: Wheel Make of engine: MAN Transmission Transmission: ZF 16S, 16 gears, Manual gearbox Axle configuration Tyre size: 315/80r22,5 Axle 1: Suspension: leaf suspension Axle 2: Steering; Suspension: leaf suspension Axle 3: Double wheels; Suspension: air suspension Axle 4: Steering; Suspension: air suspension Weights Empty weight: 18.900 kg Carrying capacity: 13.100 kg GVW: 32.000 kg Functional Mast: telescopic (7 parts) Make of bodywork: PM PM 38.5 SP LC Tipper: Back = Additional options and accessories = - PTO Kjdpfsy Nmcwox Afwena - Tipper hydraulics

Condition: like new (used), mileage: 38,000 km, fuel type: gasoline, emission class: euro6, Year of construction: 2022, PIAGGIO PORTER NP6, year 2022, petrol/LPG, 38,000 km, refrigerated box with internal dimensions 2x1.50xH1.30 m, ATP FNA 0°, certificate valid until August 2028, single owner, national vehicle, financing or leasing available, 1-year warranty. Kodox Dclhepfx Afwona

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 163101 € 3082.61 € 2000x6000 mm Hypertherm XPR 170 CORE 60 mm 38 mm 38 mm 35 mm 22 mm 25 mm 170 A 12 m/min 35 m/min +/- 0,1 mm 0,1 mm 6000 kg HyPerformance plasma power sourceHyperthermXPR 170 COREWITH "TRUE HOLE" TECHNOLOGY Automatic gas console Plasma torch height control Collision protection (torch brake away system) CNC control with Aurora Software Lantek CAD/CAM software with auto nesting Control of filter unit by CNC Remote control diagnostic by Ethernet Knodpewiq Haofx Afwsa Cutting plate alignment function User manual in GERMAN or ENGLISH Options: Suction with filter Morepricefor Optimix instead of Core Further options as CNC bevel head, drilling head, oxyfuel torch, Durma cloud etc. on request.

Condition: used, This listing is for Waters Acquity UPLC The unit is in full working condition and ready for immediate use. The Waters Acquity UPLC is an ultra performance liquid chromatography system designed for rapid, high resolution analytical separations. It delivers excellent sensitivity, reproducibility, and solvent efficiency for pharmaceutical, biotechnology, environmental, food, and research laboratory applications. Transparency Report and Technical Audit Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer Knjdpjxx Af Defx Afwja Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory

Year of construction: 2020, condition: used, This listing is for 1 of 2 Waters Acquity UPLC System The unit is in full working condition and ready for immediate use The Waters ACQUITY UPLC System is a high-performance ultra performance liquid chromatography platform designed for fast, high-resolution analytical separations in demanding laboratory environments. Ideal for pharmaceutical, biotech, and research applications requiring precision and reproducibility. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and system initialization confirmed. Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility Kodpoy H Evqefx Afwona • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)