Used Positech Filter Device for sale (18,044)

Condition: excellent (used), Year of construction: 2017, operating hours: 4,000 h, functionality: fully functional, operating pressure: 2,500 bar, Used Falch Trail Jet 125 high-pressure washer with 2500 bar pressure. The unit is in very good technical condition and ready for operation. Included with the device are the following items: - 3 new Falch high-pressure hoses - 3 used Falch high-pressure hoses - 3 control cables for connecting the Falch gun - New Falch 4-nozzle rotary head Fpedpfexzk U Ssx Aaysl - Falch gun - 3 lance extensions for the Falch gun - Additional components for the machine: sets of seals, filters, etc. The machine has been serviced at the Falch headquarters and has operated for 5 hours since service. Machine data: Year of manufacture: 2017, power: 129 kW, Deutz engine. The machine allows for adjustable working pressure.

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level Fjdszlktpepfx Aayepl at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Condition: used, This listing is for a Pacific Scientific 3313LL Met One Particle Counter The unit is in full working condition and is ready for immediate release. Operational & Practical Notes / Behavior The 3313LL counts particles by passing a laser (or light source) through the sampled air stream; when particles pass through the beam, they scatter light, which is detected by a photodetector. By having multiple size channels, the instrument can bin the counts into different particle-size ranges (for example: 0.3 µm, 0.5 µm, 1.0 µm, 3.0 µm, 5.0 µm, 10.0 µm). It likely offers programmable sampling intervals, hold times, alarm thresholds, etc. (common features in Met One/Met One‑type instruments). Data export via serial is standard, allowing integration with control or data acquisition systems. Because it’s a relatively high‑flow device (1 CFM), it can sample a substantial volume of air (improving statistical confidence in counts). The stainless steel construction helps with durability, cleanliness, and possibly resistance to corrosion or harsh environments. Fsdpfx Aasxv Ab Hoyopl As a used / legacy device, calibration, maintenance, and replacement parts (filters, laser, pump, optics) may be important considerations.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, turning length: 111,111 mm, We offer you the following: Manufacturer: DMG MORI Model: NTX 3000/1500 Year of manufacture: 2023 Control: DMG Mori Celos with Fanuc F31iB5 Technical specifications: Max. turning diameter: 670 mm Turning length: 1,519 mm Bar capacity: max. 102 mm Travels: x1-axis: 675 mm y-axis: +/- 150 mm z1-axis: 1,562 + 164 mm b-axis: +/- 120° a-axis: 1,542 mm x2-axis: 200 mm y2-axis: +/- 40 mm z2-axis: 1,542 mm Main spindle: Max. speed: 3,000 rpm Drive power: 30/25 kW Torque: 1,194/995 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 111 mm Counter spindle: Max. speed: 4,000 rpm Drive power: 18.5/18.5/15 kW Torque: 599/505/409 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 91 mm Milling spindle: Speed range: 0 – 12,000 rpm Drive power: 28/23 kW Torque: 132/95.3 Nm Tool holder: Capto C6 Number of tool stations: 76 positions Max. tool diameter: Ø 70/Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Turret: Number of tool holders: 12 positions Speed of driven tools: 12,000 rpm Tool holder: BMT40 Torque: 16.9 Nm Rapid traverse speeds: x-axis: 50 m/min y-axis: 40 m/min z-axis: 50 m/min a-axis: 36 m/min x2-axis: 25 m/min y2-axis: 18 m/min z2-axis: 40 m/min b-axis: 100 rpm Operating hours: approx. 4,500 h Spindle hours: approx. 2,200 h Technical features & accessories: Fpedpfxey Sfx Nj Aayel − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-400-128 incl. hollow clamping cylinder for main spindle − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-260-78-3Z incl. hollow clamping cylinder for counter spindle − Foot switch for chuck operation − Automatic clamping stroke monitoring of the clamping cylinder for main and counter spindle − Tailstock function for counter spindle − Magazine-side control panel for the tool magazine − Coolant: water-soluble coolant − Chip conveyor (right discharge) − Coolant temperature control/coolant chiller − Coolant spray gun − Float switch for coolant − Coolant shower at main and counter spindle chucks − Compressed air blow-off system for chuck (counter spindle) − Oil mist separator zeroGOF #2 − Oil separator − ICS 70 bar, TMF300 band filter system, 980 l tank − Manual tool presetting device for main and counter spindle − Direct measuring system in x1, x2, y, z1, z2 axes − Spindle sensor measuring system with wireless signal transmission, manuf. Renishaw RMP600 − Universal filter − 3D quickSET − Cycle Alternating Spindle Speed − Cycle "Tailstock Tip at Turret" − Cycle MPC – Machine Protection Control − Cycle MVC – Machine Vibration Control − Synchronous thread cutting without compensating chuck − Increased input resolution to 0.0001 mm − Cs control for tool spindle − Program restart Accessories, illustrated tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change, errors and prior sale excepted!

Condition: good (used), Year of construction: 2000, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system -Manufacturer: Donaldson, Filter system cartridge filter -Type: Torit Downflo DF 6 -Motor power: 3 kW -Volume flow rate: 2500 m³/h -Filter cleaning: pneumatic Fpedey Nnkvspfx Aayjl -Extraction opening: 3x Ø 320 mm -Dimensions: 1650/1300/H2740 mm -Weight: 835 kg

Condition: used, machine/vehicle number: 26694, Year of construction: 2007, operating hours: 10,077 h, load capacity: 3,500 kg, lifting height: 3,900 mm, fuel type: diesel, mast type: simplex, construction height: 3,900 mm, Equipment: cabin, sideshift, .: 26694 Device details: Year of manufacture: 2007 Load capacity: 3500 kg Lifting height: 3900 mm Recorded operating hours: 10077 h Mast type: Standard Mast height: 3900 mm Length/width/height: 2750 / 1250 / 2220 mm Operating weight: 4725 kg ---- Equipment: * Canopy * 3rd valve * 4th valve * Full cabin * Particle filter * Heater * Front work light * Rear work light ----- Attachments: * Side shifter * Fork positioner Fpodpfjzmdnvjx Aayol * Telescopic forks ---- Additional device information: Fork length 1360 - 2360mm Inner fork spread range 200mm-1090mm---- The operating hours are generally recorded hours. We would be happy to offer you suitable transport. We have another 250 - 300 forklifts, attachments, and sweepers available for you immediately. Of course, also for rent! We would be happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Subject to prior sale and errors in this offer. In retail, the device is sold in its AS-IS condition, without refurbishment. All information is without guarantee, errors and changes reserved.

Condition: good (used), Year of construction: 2009, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system, cartridge filter unit, cartridge filter Fsdpfx Aoyh Hp Roayepl -Filter system: with vibrator -Type: TMS 8/10 -Filter area: 8.5 m² -Vibration motor: Motor power 0.06 kW -Inlet connection: Ø 200 mm -Outlet connection: Ø 300 mm -Dimensions: 1070/680/H2530 mm -Weight: 243 kg

Condition: excellent (used), functionality: fully functional, Special offer! From the inventory of the city of Meschede, we can offer you this top-condition, complete "G 7882 CD" system from the world-renowned brand Miele. This unit is a fully automatic system for cleaning, disinfecting, and reprocessing medical devices and containers. The included basket features special holders for laboratory glassware and other containers – see images. The G 7882 has an internal, automatic dosing system for cleaning and additive agents, which are stored in a separate housing. The unit has never been used commercially and has seen very little use; the installed filters have only a few operating hours. All components are in perfect optical and technical condition; there are no significant damages – see images. Equipment: - Cleaning and disinfection unit - Washing basket - Data cable - Operating manual - Operating hours of the fine filter: 111 hours - Operating hours of the coarse filter: 27 hours Technical data: Weight (net): 120 kg Height with device cover: 85 cm Height without device cover: 82 cm Width: 90 cm Fpedpfx Aaozzcf Njyol Depth: 70 cm Depth with door open: 126.5 cm The sale is exclusively for commercial businesses; you will, of course, receive an invoice – but without VAT, as the item comes from a public entity. Private buyers have the option to purchase the unit "on behalf of a customer"; a direct commercial sale to private individuals will not take place. The goods are sold with the exclusion of any warranty or liability for defects. The exclusion does not apply to claims for damages resulting from gross negligence or intentional breach of the seller's obligations, as well as for any injury to life, body, and health. The total weight of the system, including accessories and pallet, is approximately 140 kg! The unit can be collected from our premises by appointment during regular opening hours. Insured shipping via a freight forwarder is possible for an additional charge. Delivery will be made within three business days after payment receipt via a freight forwarder – you also have the option to collect the unit from our premises during regular business hours by appointment. If you have any questions, please contact us directly using the contact details provided.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, fuel type: electric, fuel: electricity, Equipment: second-hand vehicle warranty, IPC GANSOW 1250E SWEEPERS NEW 6V 175Ah GEL BATTERIES (SIAP) (4x) NEW NEOS 24V 20A RECTIFIER NEW, MAIN AIR FILTER 2014 production year New cylindrical brush combined with new side brushes provide excellent sweeping effect Highly efficient dust extraction turbine and new protective rubbers around the main brush prevent fine dust and dirt from rising after sweeping. The machine has a large waste flap for collecting larger waste. The device after a general, detailed renovation, operating fluids and parts such as bearings, drive belts, protective rubbers and filters have been replaced with new ones. Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Model: IPC GANSOW 1250 E Sweeping width (mm): 700 Sweeping width with two side brushes (mm): 1200 Efficiency with two side brushes (m²/h): 7800 Fedpfx Aovunxfsayopl Sweeping speed (km/h): 6 Tank capacity (l): 85 Filter surface (m²): 3.3 Dimensions L x W x H (mm) 1615 mm x 905 mm x 1210 mm Weight of the machine ready to work (kg) ~ 350 INCLUDED: NEW GEL BATTERIES 6V 175Ah (SIAP) (4x) NEW BATTERIES NEOS 24V 20A NEW, MAIN AIR FILTER New roller brush New side brushes New roller rubber guards 85l waste containers KEY FEATURES: Ergonomically designed cockpit and centrally located operator's seat provide good visibility of the cleaned surface IPC GANSOW 1250 E sweeper is a perfect machine for efficient, economical sweeping of multi-level parking lots, warehouses and production buildings as well as outdoor areas Battery power supply provides high flexibility, allowing work also in closed places, buildings, warehouses Large working width (1200mm) ensures high surface efficiency Very legible and intuitive control panel.

Condition: new, Year of construction: 2026, Capacity: 5500 m³/h Motor power: 5.5 kW Voltage: 3-phase / 380 V Net weight: 700 kg Dimensions (L x W x H): 2289 x 1160 x 3063 mm Material: Galvanized sheet steel, flowerless, zinc coating: 80 g/m² (both sides) Minimum water flow rate: 20 L/min Minimum required pressure: 0.9 bar Sound power level: 65 - 75 dB(A) Negative pressure: 2200 - 2500 Pa Filtration area: 30 m² Dust container: 618 x 555 x 640 mm (0.22 m²) Safety and ATEX compliance The design has been adapted for use in environments with dust explosion hazards in accordance with the requirements ATEX. A robust design and an effective dust extraction system support safe and efficient work in professional industrial applications. Efficient Sawdust and Dust Removal This vacuum sawdust extractor is designed for the efficient collection of waste generated during the operation of woodworking machines. The system is ideal for extracting sawdust, shavings, and fine dust in workshops and production plants, improving workplace cleanliness and safety. Vacuum Filtration System Fsdpfx Aaezx Av Asyepl The device operates using bag filtration technology using negative pressure generated by a powerful fan. Contaminants are transported into the extractor, where larger fractions fall directly into collection containers, while fine dust is retained on the surface of the filter bags. Automatic Filter Cleaning The system is equipped with a vibration filter cleaning mechanism, which helps maintain high filtration efficiency and stable performance. After the machine finishes operating, the cleaning process is automatically activated, reducing dust buildup on the filters and improving user comfort. Universal Application The device is primarily designed for use with woodworking machines and machining lines, where effective removal of light production waste and maintaining appropriate working conditions are essential. Fire Suppression System – Water Sprinkler The extractor is equipped with a fire suppression system with a water sprinkler, permanently connected to the fire protection system via a pipeline maintained under constant water pressure. The sprinkler system must be connected to the fire protection system in accordance with the manufacturer's requirements. Explosion-Resistant Plate The extractor is equipped with an explosion-proof plate, designed to increase work safety in environments with dust explosion hazards. This element allows for controlled release of excess pressure in the event of a sudden increase in pressure within the system, reducing the risk of damage to the device and improving dust extraction system protection.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 07/018, overall weight: 2,900 kg, inner diameter: 2,500 mm, temperature: 65 °C, heating capacity: 4 kW (5.44 HP), load capacity: 1,500 kg, Equipment: documentation/manual, Cleaning System Type W 250 Used, low operating hours Available immediately. Useful dimensions: • Basket diameter: 2,500 mm • Usable internal height: 1,200 mm • Basket load capacity: 1,500 kg With the following features: • Washing • Rinsing • Hot air drying 2 x 10 kW • Plate phase separator for oil removal • Automatic filling device • Chip filter with lye cover plate Fedpfoxgcx Tox Aayepl • Indirect bath heating stainless steel/ceramic • Vapor extraction • Rinse water extraction • Automatic pumping system with floor flushing • PLC with operator panel • Pull-out washing basket with transport trolley Current new price: approx. €160,000.00 Offer price: €70,000.00 Unpacked, ex works Bad Salzuflen. Payment: Due immediately, net.

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Fpodpfxouv Hrde Aayol Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 2804221, functionality: fully functional, input frequency: 50 Hz, type of input current: three-phase, volume flow: 18,000 m³/h, suction capacity: 18,000 m³/h, filter area: 60.6 m², actuation type: electric, The EK-24 unit is a dust and chip extraction and filtration system for wood and wood-based material processing. The unit is manufactured by the Polish company Euro-Komplex, which specializes in the design, production, and installation of comprehensive dust extraction systems used in various industries, particularly in woodworking and furniture factories. The filter effectively removes contaminants from multiple machines simultaneously, such as circular saws, panel saws, four-sided planers, veneer coating machines, CNC machines, milling plotters, and sanders. Technical specifications: • Airflow: 18,000 m³/h • Filtration area: 60.6 m² • Number of filters: 48 pcs / 2000mm / 200mm • Electrovibrator: 0.09 kW x 2 • Control cabinet with frequency converter Fodpfx Aezba E Ioayepl • WTK fan • Air lock • Dry fire tube The filter's robust and solid construction is made of hot-dip galvanized or powder-coated steel with a thickness of 2mm, and the inlet tunnel and reinforcements are made of 3mm steel. The structural elements are fastened with 8.8 screws with Teflon inserts. It is worth noting that the filter basket used is uniform and smooth, without welded elements, which facilitates airflow with waste fractions without depositing them on the basket walls. The EK-24 is equipped with an 0.09 kW electrovibrator in an ATEX system, used to clean the filter bags made of antistatic and waterproof material with a weight of 350g/m² and an air permeability of 240l/dm²/min. The cleaning system is fully automated and operates in appropriately selected time cycles adapted to the type of dust being extracted. Thanks to the use of an air return lock (summer/winter flap), in winter, the cleaned and filtered air returns to the production hall, which has a very beneficial effect on maintaining the appropriate temperature and provides measurable financial benefits. The WTK fans used in the EK-24 have self-cleaning impellers and a reinforced design, which guarantees stable operation for a long time. Electrical control is carried out using a control unit equipped with protection and a time control system for the electrovibrator and the fan motor. The control cabinet is equipped with a frequency converter, which enables the adjustment of the fan motor speed and provides very precise control. The air lock is used to separate the filter zone from the external zone. It blocks the airflow, allowing only wood chips to pass through, so they fall freely into the bag without an air blast. The air lock is equipped with a system that mitigates the impact of the impeller in case a large solid object enters the unit. It is equipped with a dry fire tube mounted on the filter, used to quickly supply water or extinguishing agent to the closed filter chamber using internal sprinklers. The installation is equipped with a fire brigade connection necessary to connect fire department equipment or a hose directly from a fire hydrant. The filter also has a pressure relief device, which lowers the pressure in the event of an explosion. It is designed to relieve an explosion developing inside a protected device, such as hoppers, silos, separators, filters, sorters, etc., where an explosion hazard exists. By releasing the explosion into the environment, the explosion pressure is reduced to a value below the allowable pressure resistance of the protected device.

Condition: like new (used), Year of construction: 2020, operating hours: 574 h, functionality: fully functional, consisting of: additional vacuum tank for workpiece clamping, complete with vacuum distributor and control logic for automatic cycle KW6.6 / 9 HP (S6) electrospindle teleservice system cable remote control for easier positioning and adjustment Robot: automatic loading and unloading system for glass sheets Loading and unloading trolley with lockable wheels Mechanical/electronic device on the robot head for centering the workpiece on the working surface Pneumatically retractable workpiece stop Various double vacuum suction cups Various tool sets incl. reverse osmosis system type IDROTECNICA "IDRO RO 130 ST" max. 130 l/h VERTICAL 500 plastic storage tank 500 l Stand for storage tank SE15002 conductivity test kit incl. FILTRAGLASS ECO-BOX CNC grinding coolant water treatment unit incl. stainless steel chamber tank approx. 3,000 l, 3,000 x 1,000 x 1,000 mm, 3 chambers, circulation pump, agitators, filter system approx. 800 x 600 x 1,780 mm, electrical connection 230 V / 1.5 kW, compressed air connection on-site 7-8 bar (480 Nl/min) Dismantling/removal to be carried out by the buyer Fjdpfx Aasw H R A Noyopl

Condition: good (used), Year of construction: 2012, functionality: fully functional, Matec 30 L, Year of manufacture 2012, Fedpfxszlc Hne Aayopl Heidenhain iTNC 530 control, X/Y/Z travel 1300/600/700 mm, Spindle speed up to 12,000 rpm, HSK 63-A spindle mount, Electric handwheel, 20 bar internal coolant supply, Paper belt filter, 80-way water coolant supply, Fully enclosed work area, Direct measuring systems, Chip conveyor, Bellows with steel blades, 3D measuring probe, Laser measuring device

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure cleaner with vacuum unit on hot-dip galvanized and painted high-quality steel frame with forklift slots. The following models are available:  Vortex Combi 400 or 1000 Sewer Whale - 55 l/min, 160 bar HD pump - 1260 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank  Vortex Combi 400 or 1000 Sewer Salmon - 60 l/min, 200 bar HD pump - 3600 l/min suction capacity - 500 l fresh water tank - 400 or 1000 l sludge tank HIGH-PRESSURE HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 50-80 m ½" high-pressure hose  Hose: 50-80 m ½" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL:  Type: manual hose reel  Material: stainless steel  Capacity: max. 35 m ¾" low-pressure hose  Hose: 35 m ¾" low-pressure hose (included) FUEL TANK:  Capacity: approx. 13 l WATER FILTER:  With washable cartridge and drain valve  Filtration grade: 50 Mesh Fpsdpfx Aaofdkb Esyel INCLUDED IN DELIVERY:  Multifunction radio remote control IMET; - On/Off motor; - On/Off bypass; - Electric speed control +/-; - Emergency stop button;  Battery charger for radio remote control;  400 or 500 l water tank made of polyethylene; ACCESSORIES AVAILABLE ON REQUEST:  STORZ kit for connection to the water hydrant;  UNI 45 kit;  Mobile hot water generator 10 kW – 12 VDC;  High-pressure spray gun kit, swivel joint, and quick coupling;  High-pressure lance kit with flat jet nozzle 15° / rotating nozzle;  Lance kit for high flow rate;  Rotating nozzle kit;  Double nozzle kit;  Water sandblasting lance kit;  Detergent dispenser kit;  Stair cleaning unit;  Surface cleaner;  Sludge suction device (Venturi);  Pipe cleaning nozzles;  Other accessories on request Other available models: VORTEX COMBI 400 Whale E = Fully electric  Vortex Combi 800 Cleaning D Cold water - 800 l sludge tank - 2750 l/min suction capacity - Diesel engines: Yanmar - 15 l/min at 150 bar - HD reel with 20m hose - Radio remote control on request

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, table load: 500 kg, OPS INGERSOLL GANTRY EAGLE 400 Year of manufacture: 2015 Completely overhauled August-September 2026 EAGLE Powertec PC/NC control system 3060 22" screen with touchscreen operation MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec handheld multifunctional operating device Manual eroding with Powertec handheld EAGLE Powertec - Fine finishing generator PT 60, 60 amps (60 amps peak current) High-speed jump max. 18,000 mm/min Travel ranges (X, Y, Z) 420 x 300 x 300 mm Linear measuring system in all axes Fedpfxozwcfhs Aayspl Distance table / electrode chuck min. 135 mm / max. 585 mm Electrode changer, 20-position pick-up disc magazine Working tank (W x D x H) 650 x 500 x 340 mm Work table (W x D) 550 x 470 mm Load capacity 500 kg Overhang load 200 kg Machine dimensions W x D x H 1,436 x 2,940 x 2,730 mm Integrated cartridge filter system Accessories: CO2 fire extinguishing system The machine is currently undergoing overhaul. Original images will follow. 08/28.

Condition: excellent (used), The device performed only 140 measurements. NITON XL3t 980 GOLDD+ – a portable X-ray analyzer with a next-generation SDD detector featuring GOLDD technology. GOLDD technology enables significant improvements in accuracy and measurement time. This detector is 10 times faster than a conventional PIN detector and up to 3 times more accurate than a conventional SDD detector. The NITON XL3t 980 GOLDD+ analyzer achieves a unique combination of a 50kV X-ray tube with optimized measurement geometry and a patented processor and software. It allows for fast and accurate, simultaneous analysis of up to 28 elements: Mg, Al, Si, P, S, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, Zr, Nb, Mo, Hf, Ta, W, Re, Pb, Bi, Ag, Pd, Sn, Sb. Additionally, the analyzer enables the analysis of precious metals: Au, Pt, Ir, Ru, Rh. Analysis of light elements such as Mg, Al, Si, P without the use of helium is possible thanks to a special set of filters and a highly sensitive detector. Without helium, the determination of light elements is possible for concentrations above 0.x%. A large library of spectral databases for alloys enables the identification of stainless steels, tool steels, chromium-molybdenum steels, and alloys based on nickel, cobalt alloys, copper-based alloys, titanium alloys, and zinc, zirconium, and aluminum alloys. The analyzer provides very fast measurement. The analysis time for typical alloys is less than 3 seconds. An additional library for the analysis of light elements in the helium mode allows for the segregation and sorting of aluminum alloys such as: Fsdpezlccisfx Aayopl cast alloys depending on the silicon (Si) or magnesium (Mg) content, aluminum (Al), silicon (Si), and phosphorus (P) content in bronzes, aluminum (Al) content in titanium alloys, magnesium alloys (Mg), zinc alloys with aluminum (Al). The analyzer enables the analysis of: all iron-based alloys (0.00x% – 100%) and non-ferrous metal-based alloys (0.00x% – 100%) and rare metals Hf, Ta, Re (0.00x – 100%) precious metal alloys Au, Ag, Pd, Pt, Ir (0.00x%-100%). The NITON XL3t 980 GOLDD+ analyzer operates based on BASIC PARAMETERS, meaning that it calculates the percentage content of elements based on a mathematical equation. The analyzer also allows for the development of its own analytical programs: an identification program that assigns a name, symbol, number, etc., to a known sample, and such samples will be identified by that name. a program for quantitative chemical analysis (SuperChem Teach Mode) – based on its own standards, we create our own calibration curves for quantitative analysis. The analyzer has a large, user-friendly, touch-screen display. The screen is color and tiltable, which facilitates reading the results during field work. It includes an integrated scanner and backlit alphanumeric sample identification codes. The software allows you to store up to 10,000 results in the analyzer's memory or transfer them to a computer. Connecting the device to a computer and controlling its operation via a computer is possible using a traditional cable or wirelessly via Bluetooth. It is supplied with two interchangeable batteries. One battery enables continuous operation for 8-10 hours without the need to recharge. It has two libraries, 900 and 800.

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 700 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 68 kVA, controller manufacturer: HEIDENHAIN iTNC 530, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 600 kg, total height: 2,547 mm, total length: 5,866 mm, total width: 4,196 mm, table width: 500 mm, table length: 500 mm, overall weight: 12,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 34,000 W, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, CNC controller: HEIDENHAIN iTNC 530 Axes: X-axis travel mm: 700 Y-axis travel mm: 700 Z-axis travel mm: 700 Distance spindle nose - table surface mm: 100 - 800 Fjdpfswhdhzsx Aayjpl Rapid traverse m/min: 60 Acceleration in the axes m/s2: 6 / 6 / 5 Worktable: Number of pallets: 2 + 5 Table dimensions mm: 500 x 500 Maximum workpiece size (D x H) mm: 800 x 1.000 Max. workpiece weight kg: 600 T-Slot version: DIN 55201-A2 APC time s: 9,5 División estandar Grados: 360º (1º) Spindle: Spindle speed rpm: 18.000 Spindle drive power kW: 34 / 28 Spindle torque Nm: 110 Tool system: Tool holder: HSK-A63 Tool magazine slots: 120 Max. Tool Diameter: 80 Max. Tool Length mm: 550 Max tool weight kg: 12 Chip-to-chip time s: 2,9 Equipment: Electronic Handwheel Chip conveyor Rotating inspection windows Rinsing gun Signal lamp Tool breakage probe 3D quickSET Workarea light CE conformity Cooling device blowing air through spindle center, selectable via M-function MPC – Machine Protection Control Paper band filter Infrared Probe Heidenhain TS640 Blum laser tool measurement Taper clear brushes Blum laser NT Hybrid Round pallet Storage (RPS 5) Measuring probe Heidenhain TS 640 Production package Internal cooling supply 40 BAR Cooling: Cooling through the Spindle Center bar: 40 BAR Tank capacity: 980 High-pressure bar: 40 BAR Machine running times: Under power: 95.210 Operating Time: 44.971 Rated power kVA: 68 Basic machine dimensions / weight: Length mm: 5.866 Width mm: 4.196 Height mm: 2.547 Weight kg: 12.000.

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Fpsdpor Hr Arjfx Aayol Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: used, Year of construction: 2006, gebraucht 2006 5539 prompt, Zwischenverkauf v Taiwan 55100 € 1 49600 € 1000 mm 850 mm 1000 x 610 mm 1000 x 600 mm 1000 mm 5 - 25 m/min 1250 mm/min 3 - 32 (0,02) mm 690 mm max. 400 mm/min mm 400 mm/min 0.001 mm 1450 1/min 11 kW 3.7 kW 0.37 kW 20,6 kW 3700 mm 4000 mm 3250 mm 4800 x 2830 x 2800 mm 7400 kg 1500 kg 1120 kg Fpsdpfezzrcdjx Aayel 1500 kg 355 x 75 x 127 mm Servo drive for grinding wheel feed, hardened and grounded slide ways Grinding wheel spindle on 6 high precision angular contact bearings Electro-magnetic chuck Coolant equiptment with aut. paper filter and magnetic separator Over the wheel automatic dressing device (with automatic compensation) Grinding wheel withgrinding wheel flange machine lamp Machine and equipment according to the CE-regulations User manual in ENGLISH New grinding spindle, spindle bearings, grinding wheel andgrinding wheel flange Buying used machinery is a matter of trust - Our transparency promise We offer you maximum security and complete transparency. •HONEST INSIGHTS: Detailed photos and functional videos of the current condition •LIVE ON-SITE CHECK:Live testing is possible at our facility •DIGITAL DEMONSTRATION:Individual live demonstration via video call •RISK-FREE PURCHASE:14-day return policy Details:

Condition: good (used), Year of construction: 2015, CNC milling machine, milling and engraving machine, MECANUMERIC, MECA EASY 1510 – used: Price ex works: €23,500 (net)! Manufacturer: MECANUMERIC Type: MECA EASY 1510 Year of manufacture: 2015, former DEMO MACHINE Three-axis milling machine in a flat-bed gantry design. Working travels X, Y, Z axes: 1,050 / 1,550 / 200 mm. Table frame and gantry: Designed as a solid, stress-free, fully welded steel structure, powder-coated. Heavy table substructure for mounting the vacuum table VAC-CAISSON, designed as a cassette, with air passage holes in a 10 mm grid. Feed rate: 300 mm/sec (18 m/min) in rapid traverse and feed mode! Guidance on rails, slide shoes with upstream ball screw. Transmission: Precision ball screws Ball screw on all axes Maintenance-free, brushless servo drive motors (750 W on X and Y, 300 W on Z) Repeat accuracy: +/- 0.025 mm Mechanical resolution: 0.0006 mm Numerical control: Mecanumeric CN 7000 ISO-G-Code Machine operation via a 10" touch screen display Complete documentation and CE declaration of conformity in accordance with the basic safety and health requirements of Vacuum table 1,020 x 1,500 mm Support/work table designed as a closed aluminum plate, on which vacuum passage holes are arranged in a 10 mm grid. The table is divided into 2 main areas, which can be switched on manually. Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. Fedpfx Aozbybijayepl Milling spindle HF40-ATC24 ENC Conversion Module APSG-A Vacuum generation by one (1) two-stage high-performance vacuum side-channel compressor. Motor power 4.5 KW, suction capacity 320 m/hour, filter and silencer included. Due to the overall size and potential heat development, the pumps are housed outside the machine body. The electrical control and safety devices for the pump and valves are integrated in the machine control cabinet or on the control panel. High-frequency motor milling spindle 4KW Power: 4KW Speed range: up to 24,000 rpm. Fast tool change with pneumatic ejection, ISO30 taper. Tool holder: Clamping diameter up to 2-16 mm. Cooling with compressed air 6 bar 20 m/h Converters and switching elements are included in this position. Safety enclosure for the machine Front with door and safety lock - Position PROTCHOC omitted - Preparation of the electrical control and switching elements as well as the output socket for a high-performance industrial vacuum cleaner. Changer CH 6 S Condition: good Available: immediately Location: Delmenhorst

Condition: good (used), mileage: 297,525 km, power: 151 kW (205.30 HP), first registration: 12/2006, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, suspension: steel-air, Year of construction: 2006, Equipment: cruise control, electric window regulation, fog lights, power mirror, = Additional Options and Accessories = - Leaf spring suspension - EPS (Electronic Stability Program) - Radio/CD player - Side door - Toolbox = Further Information = Axle configuration Front axle: Steering; Suspension: Leaf spring Rear axle: Suspension: Air suspension Weights Unladen weight: 7,300 kg Payload: 4,690 kg gross vehicle weight: 11,990 kg Functionality Refrigeration unit engine: Diesel and electric Condition Technical condition: good Visual condition: good Warranty Warranty: No liability for typographical and printing errors. Subject to prior sale and errors! Further Information Please contact Emad Al Shogran for more information. Fedovrt Tvopfx Aayspl Vehicle number: 17 MAN 12.210 CARRIER Supra 850 / Euro 4 / Tail Lift .: WMAN15ZZ27Y183093 German vehicle TÜV: General inspection (HU): 05.2024 - Safety inspection (SP): 11.2024 Transmission: Automatic Suspension: Leaf / air suspension Engine brake Cruise control Emission standard EURO 4 Tail lift Refrigeration unit brand: CARRIER Type: Supra 850 Refrigeration unit engine: Diesel + Electric Internal dimensions: Length: 7.25 m Width: 2.46 m Height: 2.45 m Special equipment: End crossmember, audio system: MAN CD radio 24V, wide-angle exterior mirror, left, 140 Ah battery, passenger bench seat, comfort driver's seat, air-suspended, flame-start system, mechanical lifting roof, side guard device Additional equipment: Axle configuration: 4x2, wide-angle exterior mirror, right, MAN-Tronic onboard computer, kerb mirror right, front compressed air connection, MAN-Brakematic electronic brake system, EURO 4 engine, cab type: C (Compact), suspension: leaf/air, generator 28V 80A, 6-speed transmission - Type: ZF S6-850, rear axle HY-0925, body/chassis: chassis, heated fuel filter, fuel tank: 150 L, adjustable steering column, raised air intake, dry air filter bottom right, engine 4.6 L - 151 kW diesel, engine brake, spare wheel holder behind rear axle, disc brakes rear axle, disc brakes front axle, rear axle stabilizer, plastic bumper, rear underride guard, front underride guard, viscous fan, front axle VOK-05 cranked, permissible total weight 11.99 t Refrigeration unit brand: Carrier = Company Information = No liability for typographical or printing errors, changes, prior sale, and mistakes reserved! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email.

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 620 kg, filter area: 60 m², suction capacity: 5,000 m³/h, negative pressure: 2,500 Pa, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based system for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Kemper System 8000 The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Year of manufacture: 2003 Fpedpfx Aezil Ivoayel Fans with a power of 5.5 kW. Flow rate: 5000 m3/h Vacuum: 2500 Pa Filtration area: 60 m2 Stock number: 1147

Condition: used, Year of construction: 2004, Equipment: type plate available, A complete drying unit MOTAN - LUXOR 1200 A (Line C) is for sale consisting of: 1x crystallizer: hopper 1200 PET A (1.2m³) including agitator + heating unit ETA Box including air filter 1x dryer: hopper 3600 PET (3.3m³) including heating unit ETA Box -1400 1x dry air generator 1200 - control unit including air filter 2x conveyor device HLX-30-1 1x coupling station 2x air washer 1x conveyor fan RIETSCHLE including MOTAN central filter F30 System features: - Capacity UP TO 20t/day - Dry air volume 1200m3/h - Dew point control - 2 cartridge dryers for residual moisture up to 0.003% - Technical documentation The system is 2x available Subject to prior sale Please send inquiries by email only Note: The machine is still installed and can be inspected on site. The buyer must remove it himself and organize shipping. Fpedpjuakr Hefx Aayjl This is not part of the offer price.