Used Riggs Three Head Filler for sale (14,475)

Condition: used, Three-phase power meter: current, voltage, and power measurement; long-term monitoring; energy measurement Kodpfx Aex A Imzspdsdl 3-phase power measurement device, ammeter, voltmeter, digital measuring instrument, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, phase sequence detection, energy measurement, and harmonics measurement. Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 KB non-volatile memory (max. 21,000 readings, max. 10 data sets) Sampling rate: 5 s, 30 s, 1 min, 2 min. (adjustable) Data transmission: via optically isolated RS232 interface Manual memory: max. 99 measurements Overvoltage category: CAT III 600 V Power supply: 8 x 1.5V AA batteries or mains adapter 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measuring range: 0 - 600 V RMS Display range: 0 - 999.9 V RMS Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Measuring range Input I1, I2, I3: 3 - 999.9 A Input I4: 3 - 250 A Display range: 0 - 999.9 A Resolution: 0.1 A Clamp opening: 40 mm Active power: Selectable display of the active power of an individual input or the total value Display range: 0 - 999.9 kW Resolution: 0.1 kW Apparent power: Calculated from the RMS values of voltage and current Display range: 0 - 999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45...80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - Operating manual - 4 measuring clamps - 4 test leads with crocodile clips - RS232 adapter cable - Mains adapter 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: 3 kg Device tested, fully functional. Note: The housing of 2 measuring clamps is damaged and the battery compartment shows some oxidation (see photos).

Condition: used, Rotary table, indexing table, dividing head WMW type D 315 k Serial no.: 10930 Table diameter: 315 mm Table height: 135 mm Gear ratio: 90 : 1 - Crank handle with indexing plate and sector arm - Graduated scale ring for reading at the crank - Readable degree graduation on the rotary table Kdodpfx Apsxf Uytodel - Swing-out worm for direct indexing - Clamping via clamping lever - 14 mm T-slots in the table plate (one place damaged) - Built-in indexing plate: 23-28-33-42-51-61 Weight: 85 kg

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 360 mm Table height: 130 mm Transmission ratio: 120 : 1 Clamping surface: 375 x 430 mm Grid pattern on clamping surface: 400 x 125 mm, Ø 14 mm - Indirect indexing via handwheel on the worm gear, transmission ratio: 120:1 - Worm gear can be engaged/disengaged for direct and indirect indexing - Clamping via 2 clamping levers in any position Kdsdpfoy Sbwzox Apdel - Crank handle with index plate - 1 index plate with hole counts: 22, 24, 29, 36, 37, 49, 57, 63 - 1 index plate with hole counts: 16, 27, 30, 33, 41, 47, 53, 61 - 1 index plate with hole counts: 23, 25, 28, 31, 39, 43, 51, 59 - 14 mm T-slots in the table surface - Table surface slightly face milled Overall dimensions L x W x H: 600 x 440 x 130 mm Weight: 81 kg Good condition

Condition: used, mileage: 197,845 km, power: 265 kW (360.30 HP), first registration: 03/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 06/2026, color: blue, gearing type: automatic, emission class: euro5, loading space length: 4,000 mm, loading space width: 2,450 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, crane, Stock no. 5822 Iveco Trakker 360 - AD190T/W Magirus with Palfinger front crane type 13001 / Radio remote control / Meiller steel 3-way tipper / 4x4 / AP axles ---- * Manufacturer: Iveco * Model: Trakker 360 - AD190T/W Magirus * Gross vehicle weight: 18,000 kg * Unladen weight (as per registration): 11,700 kg * Transmission: Automatic * First registration: 03/2017 * Mileage: approx. 197,845 km * Axles: 4x4 / AP axles * Wheelbase: 3.80 m * Suspension: Leaf springs * Tyres: 1st axle 385/65 R 22.5, 2nd axle 315/80 R 22.5, approx. 50% tread * Cab: Day cab / 2 seats * MOT (TÜV): 06/2026 * Safety inspection (UVV): 06/2026 * Colour: Blue * Palfinger front crane type PK 13001K, year 2017, with radio remote control * 2 hydraulic extensions * Maximum outreach at 6.60 m = 1,700 kg * Short outreach at 3.80 m = 3,450 kg * 5th and 6th hydraulic circuits for grab * Kinshofer grab type KM 604-250, 250 L capacity * Hydraulic support legs at the front * Meiller steel 3-way tipper with 2 pairs of retractable lashing eyes * Trailer coupling with 50 mm pin and hydraulic connections * Toolbox rear left and right * Approx. 295 litre steel diesel tank (right) * AdBlue tank (right) * Foldable underrun protection * Sun visor * Rear cab wall with window * Roof hatch * Electric windows and mirrors * Heated mirrors * Differential locks * Cruise control * Engine brake * Multifunction steering wheel * Radio with Bluetooth * One owner German vehicle! German documents! One previous owner! Notice regarding possible errors in the listing: Despite careful creation of the advertisement, there may be errors in the text or specifications. We accept no liability for mistakes, changes, or prior sale. All information is provided without guarantee. Please contact us to verify details or for further questions. Kdedpfxsy Sra To Apdol Tipper body approx. 4.00 m long x 2.45 m wide x 0.60 m high.

Condition: used, mileage: 533,900 km, power: 279 kW (379.33 HP), first registration: 08/2006, fuel type: diesel, empty load weight: 15,800 kg, maximum load weight: 10,200 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro4, suspension: steel-air, loading space length: 5,700 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, onboard computer, parking heater, soot filter, trailer coupling, Scania R380 6x2*4 three-way tipper with crane First registration: 1990, with documentation Euro 4 Long cab with bed Automatic transmission Air conditioning, auxiliary heater Trailer coupling 6x2*4 axle configuration Leaf/air suspension 3rd axle steerable and liftable Technically permissible total weight 70,000 kg Tires 385/65 R22.5, tread depth approximately 50% Tires 315/80 R22.5, tread depth approximately 50% Wheelbase 1st - 2nd axle 4800 mm Three-way tipper body 5700 mm Side boards 1000 mm Unladen weight 15,810 kg Crane HIAB 220C-5 Radio remote control 5 hydraulic extensions 5th + 6th control circuit Including rotator!!! Including grab!!! 2.60 m / 7000 kg 4.50 m / 4000 kg 6.10 m / 2900 kg 7.80 m / 2100 kg 9.80 m / 1600 kg 11.80 m / 1300 kg 13.80 m / 1100 kg Hook height approximately 17.50 meters Kdedpfxey S Spbj Apdjl Export / net price: 33,900 Euros All information without guarantee, errors and omissions excepted.

Condition: new, power: 170 kW (231.14 HP), fuel type: diesel, overall weight: 8,600 kg, axle configuration: 2 axles, color: white, gearing type: automatic, Equipment: air conditioning, * Multifunction steering wheel * Rear-view camera * Air conditioning * 2 passenger seats * Cruise control * Leaf/air suspension * HIAB X-Hiduo 072 DS-2 year 2024 Kodoy Sribepfx Apdsdl * Remote control * 2 hydraulic outriggers * Load hook * Unladen weight: 6,500 kg ----Internal vehicle number: 10283----Errors and prior sale excepted.

Condition: used, mileage: 88,150 km, power: 132 kW (179.47 HP), first registration: 10/2018, fuel type: diesel, overall weight: 7,000 kg, next inspection (TÜV): 02/2027, color: orange, gearing type: mechanical, emission class: euro6, number of seats: 6, loading space length: 3,100 mm, loading space width: 2,180 mm, loading space height: 400 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, crane, electronic stability program (ESP), parking heater, soot filter, CTM steel three-way tipper, internal loading dimensions: 3100 x 2180 x 400 mm, 4 pairs of lashing eyes recessed in the floor, headboard grid behind the driver's cab, Palfinger PK 7001-K loading crane mounted behind the driver's cab (year 2018) with remote control and oil cooler, lifting capacity at max. 6.30 m / 870 kg, Kinshofer type PZG 250 G dual-shell grab bucket, nominal capacity 250 l, with continuous rotation servo motor, cab with double crew compartment, 4 doors, 6 seats, comfort driver's seat, driver's airbag, Webasto auxiliary heater, air conditioning, 2x electric windows, electrically adjustable and heated exterior mirrors, multifunction steering wheel, maintenance interval display, radio / CD with Bluetooth, central locking with remote control, cruise control, ESP, lane departure warning system, 6-speed manual gearbox, 100 l fuel tank, 24 l AdBlue tank, digital tachograph, daytime running lights, fog lights, LED work lights on rear cab roof left & right, beacon lights on cab roof left & right, trailer coupling with tow jaw and ball head, 12-volt / 13-pin trailer socket, large plastic tool box on right side, spare wheel holder left side, rear axle differential lock, GVW 7,000 kg / payload 1,750 kg, wheelbase 4,750 mm, 1 owner, regularly serviced in workshop, good overall condition, not a rental vehicle! Euro 6 engine, low noise, German vehicle with German registration papers, sale to commercial customers only! All information without guarantee! Subject to errors and prior sale! Kdjdpfxoylriys Apdsl

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, 1 x EME Series 2000 inline wrap-around labelling machine with ICE Zodiac ES thermal transfer printer. Mounted on height-adjustable frame. It is designed to apply labels to a variety of containers including bottles, jars, cans, and tubs, making it suitable for diverse packaging needs. Serial Number - 15066. Kdjdpfxjy Hkqye Apdel Date of manufacture - 2015. Labelling heads - 2 x EME Series 4000. Belt - slatted, 85mm wide. Overall dimensions - 3000mm long x 1500mm wide x 1300mm high (can go higher).

Condition: used, diameter . mm Number of knives . tool adaptor . The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More Kjdpfx Apsyqvihjdjdl than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, 1 x Loma Systems IQ2F / IQ3 twin-head metal detector with alarm and belt stop on detect reject system, mounted on a height-adjustable frame. Date of manufacture - 2010. Kdedpey Hinkjfx Apdol Serial number IQ3 standard head - MD301-12429D. Aperture dimensions: IQ2F Ferrous-in-foil head - 370mm wide x 135mm high (105mm useable) / IQ3 standard head - 350mm wide x 150mm high (115mm useable). IQ3 standard head frequency - Variable. Handing - Left to Right. Belt type - rubber. Belt dimensions - 2600mm long x 300mm wide.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, 1 x Loma Systems IQ2F/IQ3+ twin-head metal detector with pneumatic push-arm reject into a lockable bin, mounted on a height-adjustable frame. This unit is fully retail compliant. Serial number for IQ2F Ferrous-in-Foil head - QFP37184-55144F. Kdjdpfx Asy Hh U Njpdsl Serial number for IQ3+ standard head - QPB35-15-25491D. Date of manufacture - 2014. Aperture dimensions: IQ2F Ferrous-in-Foil head - 370mm wide x 180mm high (125mm useable) / IQ3+ standard head - 350mm wide x 125mm high (115mm useable). IQ3+ standard head frequency - Variable. Handing - Right to Left. Belt type - modular plastic. Belt dimensions - 2700mm long x 300mm wide.

Condition: excellent (used), Item description: HOFMANN RW/NC-220/320L, 4th axis ----- Item condition: Good used condition. Removed from a Matec machine. Internal number: 26.368 Kedpfx Asy S Tzrjpdedl

Year of construction: 1999, condition: used, The Ilpra FS 5000 is equipped with twin stages of all stations, the filling heads are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Ilpra cup fillers are mainly driven by a main motor and signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request. Cup Diameter: 95 mm Outside diameter Filling Range: 50-500 grams Capacity: 4800 cups/Hour Stations: Cup Dispenser -> Filling -> Aluminium Lid Applicator -> Sealing -> Date Stamping -> Out-feed Conveyor Kdedpfxoxyh R Uj Apdel Guarding: Fully Enclosed Cabin Control Panle: Simple Push button Controls Air Requirements: 6 Bar Pressure Electrical Requirements: 400 v / 3 phase / 50 -60 hz Filling Type: Piston Volumetric Filling Hopper: Included Condition: Good Condition Serviced

Condition: used, Year of construction: 2006, This is an in-line Tub Filler for yoghurts and desserts for catering purposes. The filling volumes are 1-5 kg per tub. This machine was used for a high end customer with the ability of meeting all quality and health and safety standards. Kdsdpeynrzbefx Apdsl Capacity : 5000 kg per hour Sealing: Film roll with sealing and cutting device as well as roll to manage the excess material Stations: Tub dispenser > Filling > Sealing > Lid applicator > Date printing > outlet conveyor Protection: Fully enclosed cabin Condition: Good Available: Immediately

Condition: good (used), Year of construction: 2016, Ref:11076 . 2016 Muller Martini SIGMA Three Knife Trimmer On demand trimmer for digital dooks finishing Kdjdpfx Aoyw Hwdopdol Features: Designed for the finishing of both offset- and digitally-produced books in a one-off, short-, or large-run workflow. Fully-automated, one-off book 3-knife trimmer. Ultra-efficient digital book trimming system with zero makeready for optimal one-off book production. Workflow can be consolidated and efficiently processed through the SigmaTrimmer work center with minimal production planning effort & considerable labour savings. Bound, untrimmed books of varying sizes and thickness can be fed into the SigmaTrimmer continuously, without stopping to change parts or key in any data. Book printers can cut books of different formats and thicknesses in quick succession, without interruption. The format for each book is read with a barcode scanner during infeed and all settings are made automatically, which eliminates makeready time. Specification: Max speed: 1,000 cycles/hr Max untrimmed size: 320x240mm Min untrimmed size: 154x108mm Max book thickness: 40mm Min book thickness: 2mm Max Front trim: 86mm Min front trim: 3mm Max foot trim: 75mm Min foot trim: 3mm 5 x Sigma trimmers available, all the same age. Can be bought individually or as multiples.

Condition: used, mileage: 211,033 km, power: 331 kW (450.03 HP), first registration: 03/2016, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 04/2027, brakes: retarder, color: orange, gearing type: automatic, emission class: euro6, loading space volume: 14 m³, loading space length: 5,600 mm, loading space width: 2,420 mm, loading space height: 1,050 mm, Equipment: ABS, air conditioning, navigation system, parking heater, * Sun visor * ABS * TCS Traction Control System * Radio * Navigation system * On-board computer * Rear view camera * Cruise control * Air horns * Electric windows * Electrically adjustable mirrors * Mirror heating * Central locking * Fog lights * Sunroof * Rear window * Driver's comfort seat * Seat heating * Longitudinal and transverse locks * AP axles Kdsdpfxjy Tq Tzs Apdjl * Steel bumper * All-round orange warning light * Exhaust behind the cab * Foldable underrun protection * Auxiliary heater * Hill start assist * Cool box * Towing hitch * 12-speed * Suspension: leaf spring * Payload: 18060 * Continuous brake: retarder ----Body: Dautel 3-sided pallet tipping body, type DK 4 (rated load 24,500 kg), steel side board on the left with boardmatic system, elevated steel front wall with excavator protection, steel rear wall, hopper at the rear, steel floor, lashing points, aluminum side board on the right. Sales only to commercial businesses. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION WITHOUT GUARANTEE. INCLUDING EQUIPMENT + ACCESSORIES. Our general terms and conditions (see imprint) form the basis for all purchase agreements, invoices, proforma invoices, orders and sales negotiations.

Condition: used, mileage: 116,748 km, power: 335 kW (455.47 HP), first registration: 03/2022, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 04/2026, color: red, gearing type: automatic, emission class: euro6, loading space volume: 13 m³, loading space length: 5,600 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, navigation system, parking heater, * Sun visor * ABS * ASR * Radio * On-board computer * Cruise control * Hill start assist * Electric windows * Electrically adjustable mirrors * Heated mirrors * Central locking * Sunroof * Driver comfort seat * Seat heating * Longitudinal and transverse locks * AP axles * Towing hitch * Auxiliary heater * Cool box * Air intake on top * Foldable underbody protection * Rain sensor * Predictive Powertrain Control * Navigation system * Air horns * Fog lights * Automatic headlights * Seat ventilation * 360-degree warning light (orange) * Off-road driving program Kjdpfx Asy Tq Tnopdjdl * Rearview camera * Air dryer * 12-speed * Suspension: leaf spring * Payload: 17660 * Continuous brake: High Performance Engine Brake ----Superstructure: Meiller 3-way steel, Bordmatik on the left, Schütte at the rear, electric sliding tarp with remote control, cargo area camera.----Windshield tinted Sales only to businesses. IN CASE OF EXPORT, ONLY THE NET PRICE IS TO BE PAID!!!!! ALL INFORMATION IS WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. The basis for all purchase agreements, invoices, proforma invoices, orders, and sales negotiations are our general terms and conditions (see our legal notice for details).

Condition: used, mileage: 182,873 km, power: 260 kW (353.50 HP), first registration: 02/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 04/2026, color: white, gearing type: automatic, emission class: euro6, loading space volume: 7 m³, loading space length: 4,200 mm, loading space width: 2,420 mm, loading space height: 700 mm, Equipment: ABS, crane, navigation system, * Sun visor * ABS (Anti-lock Braking System) * ASR (Anti-Slip Regulation/Traction Control) * Radio * On-board computer * Cruise control * Hill-start assist * Electric window lifters * Electrically adjustable mirrors * Mirror heating * Central locking * Roof hatch * Rear window * Rear axle differential lock * Offroad driving mode * Trailer coupling * 2-line air connection * Hydraulic connection for trailer * AP axles * Fog lights * Driver comfort seat * Seat heating * Reversing warning system * ESP (Electronic Stability Program) * Cornering lights * Navigation system * Rear-view camera Ksdpfx Ajwv Syuspdjdl * 8-speed gearbox * Suspension: Leaf springs * Payload: 7,085 kg * Permanent brake: High Performance Engine Brake ----Special body: Crane: Atlas AK 126.3, foldable, double hydraulic extension, fully hydraulic outriggers, right/left operation with operator’s platform, 6th and 7th hydraulic circuits for rotator and grab operation. Read load chart: Lifts 5.66 t at 1.98 m, 3.26 t at 3.71 m, 2.22 t at 5.41 m, 1.69 t at 7.11 m. ----Body: Meiller 3-way steel pallet tipper, raised front wall, spring-assisted sideboards left and right, lashing eyes. Sale to business customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, PARTICULARLY REGARDING EQUIPMENT & ACCESSORIES. All contracts of sale, invoices, pro forma invoices, orders, and sales conversations are subject to our general terms and conditions (see imprint).

Condition: used, empty load weight: 4,430 kg, maximum load weight: 13,570 kg, overall weight: 18,000 kg, axle configuration: > 3 axles, first registration: 09/2016, loading space length: 5,000 mm, loading space width: 2,440 mm, loading space height: 900 mm, loading space volume: 10 m³, total length: 5,000 mm, suspension: air, wheelbase: 1,310 mm, color: red, Year of construction: 2016, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40577 Schwarzmüller, 3-way tipper * Year of manufacture: 2016 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Tandem trailer * Air connection coupling head (red + yellow) * 15-pin connection plug * Lifting and lowering device * Swing tailgate * Suspension: Air * Gross weight: 18,000 kg * Unladen weight: 4,430 kg * Payload: 13,570 kg * Permissible total weight: 18,000 kg * Axle manufacturer: BPW * Wheelbase: 1,310 mm * Internal dimensions: L=5,000 mm, W=2,440 mm, H=900 mm * Internal volume: 11 m³ * Pallet spaces: 12 * Additional photos can be sent on request Liability disclaimer: Specifications subject to change, prior sale, and errors excepted. More photos and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing options * Handling of all (export) documentation * Ordering of export / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transportation of commercial vehicles Kdodpfx Aoyicldepdel Feel free to contact our qualified staff—we are happy to advise you.

Condition: used, empty load weight: 4,150 kg, maximum load weight: 13,850 kg, overall weight: 18,000 kg, axle configuration: > 3 axles, first registration: 08/2018, next inspection (TÜV): 09/2026, loading space length: 5,000 mm, loading space width: 2,440 mm, loading space height: 900 mm, loading space volume: 10 m³, total length: 5,000 mm, suspension: air, wheelbase: 1,310 mm, color: red, Year of construction: 2018, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40575 Schwarzmueller, 3-way tipper trailer * Year of manufacture: 2018 * ABS (Anti-lock Braking System) * EBS (Electronic Braking System) * Air suspension * Tandem axle trailer * Air supply coupling heads (red + yellow) * 15-pin connector plug Kjdpfeyicv Njx Apdsdl * Lifting and lowering device * Swing tailgate * Next inspections (MOT / Emissions): 09/2026 * Suspension type: air * Gross vehicle weight: 18,000 kg * Unladen weight: 4,150 kg * Payload: 13,850 kg * Permissible gross weight: 18,000 kg * Axle manufacturer: BPW * Wheelbase: 1,310 mm * Internal dimensions: L=5,000 mm, W=2,440 mm, H=900 mm * Internal volume*: 11 m³ * Pallet spaces: 12 * Further photos available on request Disclaimer: Subject to prior sale, changes, and errors. More photos and videos can be found on our website. Our comprehensive services include, for example: * Purchase/Sale/Rental of commercial vehicles * Fast, straightforward financing options * Handling of all (export) documentation * Arrangement of export license plates / customs plates * Vehicle refurbishment: new tarpaulins, lettering, paintwork, etc. * Professional loading and load securing * TÜV inspections, registration service * Transportation of commercial vehicles Consult our trained specialists – we are happy to advise you.

Condition: excellent (used), Year of construction: 2002, Mayer FH2-3120 Veneer Saw, Precision Cut-Off Saw with Jointing Unit (Planer Unit) and Veneer Stop Table Kdjdpfjyug Hrjx Apdol Robust machine construction by Mayer A video of the machine in operation can be provided upon request. For tear-free and joint-tight cutting of veneer, including thick-cut veneer Maximum cutting length: 3100 mm Saw unit and jointing unit are combined in one assembly, so only one unit needs to be moved. Easily maneuverable saw unit running on linear guides. Rear support table with through finger stop, adjustable from approx. 2 to 62 cm, with pneumatic clamping and digital readout Pneumatic workpiece clamping Saw drive motor: 1.8 kW; Planer unit: 1.0 kW Motors can be conveniently switched on via the handle; they run only when needed. Fine-cutting saw blade with carbide tips, sharpened Planer head Z4, equipped with new carbide indexable inserts Practical front veneer tray, extendable for the planer unit 100 mm extraction port with extraction duct Extraction hoses and drive belts renewed Pneumatic maintenance unit renewed CE marking Operating manual On-board tools Original paint, only a few spots touched up Dimensions approx. 4350 x 1700 x 1400 mm (L x W x H). Weight approx. 800 kg. The machine can be inspected and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'more offers from this provider.'

Condition: used, circle diameter 125 mm number of blades 4 Z length 240 mm Kdodpsyz Dfyofx Apdjl bore 40 mm material Stahl

Condition: used, bore 50 mm length 310 mm knife system Centrolock circle diameter 150 mm number of blades 4 Z Two planing heads Weinig type 531 150 01 498 including a batch of untested knives. Kdedpfoyz Dftox Apdel

Condition: used, Bore: 50 mm Kdjdsw Uiq Tjpfx Apdjl Swing diameter (ø): 163 mm Length: 180 mm Material: steel Knives: strip planer knives Z2

Condition: used, Bore: 50 mm Speed: max. 6,000 rpm Cutting circle (ø): 163 mm Length: 100 mm Material: steel Knives: planer knives Z2 Available: 2 units Kdsdpew Ngv Ajfx Apdol Price per unit: €120.00 + VAT.