Used Robino Galandrino Zenit 2/6 for sale (95,495)

Condition: ready for operation (used), Working widths 660 mm Equipment 2nd folding unit: • 6 buckle plates Rcsdpod Hgvzjfx Am Tod • noise prevention

Condition: ready for operation (used), Year of construction: 2001, Two identical Kuka industrial robots are available. Reach: approx. 1500mm. Accuracy: +/-0.15mm. Control system: Kuka KRC 1. 4 CNC axes have been added to one robot. Including: 2x hand-held programming devices (PHG) and 2x control cabinets. Documentation: available. On-site inspection is possible. Rodev Dagajpfx Am Tjcd

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Rcjdjuxfu Nepfx Am Ted Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, functionality: fully functional, HYDRAULIC VALVE Redpfjxzqrwox Am Tecd All our items have been inspected by the technical department.

Condition: used, functionality: fully functional, Agilent 1100 Series G1158A 2 Position 6 Port Valve. Rjdpfx Amsuavv Dj Tscd The 1100 Series Model G1158A 2 Position 6 Port Valve provides the user comprehensive solutions for more flexibility through solvent selection and column selection. It offers new automation capabilities for sample preparation as well as higher sample throughput with alternating column regeneration. It is fully integrated in the CAN environment (control area network) of the Agilent 1100 HPLC system and can be controlled by the Agilent ChemStation Software. 2 for sale. 1 piece/590 EUR. Good working condition. Please check out our other listings as well.

Condition: excellent (used), For sale: a Mannesmann Demag geared motor with an angular gearbox, fully functional and ready for operation. The unit has been inspected and is in good technical condition. Normal signs of wear and tear resulting from use are visible. Technical data: Manufacturer: Mannesmann Demag Motor type: UMF71BX-6-7 Gearbox type: S040-B5-21-3 Motor power: 0.25 kW Rjdjzn Aamopfx Am Tecd Power supply: 3×220/380 V Frequency: 50 Hz Motor speed: 890 rpm Output speed: 64 rpm Gear ratio: i = 14:1 Protection rating: IP54 Insulation class: B

Condition: excellent (used), For sale: Mannesmann Demag S040-B5-21-3 geared motor with a three-phase UMF71BX-6-Z motor, 0.25 kW. The unit is fully functional, tested, and ready for operation. The technical and visual condition is good, with normal signs of wear and tear from use. The robust gearbox and reliable motor make this geared motor ideally suited for driving conveyors, feeders, production machines, and other industrial equipment. Technical specifications: Rcsdpfx Aoznxa Asm Tjd Manufacturer: Mannesmann Demag Gearbox type: S040-B5-21-3/ Motor type: UMF71BX-6-Z Motor power: 0.25 kW Power supply: 3× 220/380 V, 50 Hz Motor speed: 890 rpm Output speed: approx. 64 rpm Gear ratio: i = 14 Current: 1.56 / 0.90 A Power factor: cos φ 0.73 Protection rating: IP54 Insulation class: B Lubrication: synthetic oil Country of manufacture: Germany

Condition: as good as new (ex-display), End milling cutter for rollers (24340) Diameter 86 mm and length 62 mm Diameter 97 mm and length 63 mm Weight 4.5 kg Rcsdpfjdwbk Djx Am Tjd

Condition: excellent (used), I am offering a Heraeus Kendro UT 6 P laboratory oven with a digital Function Line controller. This device is designed for drying, heating, sterilization, and thermal processing of samples in laboratories, research facilities, and industrial plants. The oven is in perfect working order. The stainless steel chamber is clean and in good condition. It is equipped with a grate and guides that allow for adjusting the shelf height. Technical data: Manufacturer: Heraeus / Kendro Laboratory Products Rjdpfszmamusx Am Tecd Model: UT 6 P Maximum temperature: 250°C Power supply: 230 V / 50–60 Hz Power: 1.27 kW Rated current: 5.5 A Protection class: IP20 Control: digital Function Line panel Stainless steel chamber Forced air circulation for uniform temperature distribution Condition: used, in working order

Condition: good (used), The scope of delivery includes: 56x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Rcsdpfspl Tfwjx Am Tod Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: new, We offer you a new workbench from the manufacturer Metal Sistem for sale. Delivery time: approx. 3 - 4 weeks Technical data of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm The scope of delivery includes: 02x workbench frames, new Material color: fully galvanized Frame type: TS4 including cross and diagonal braces, base plates The frames are pre-assembled (bolted framework) 723 mm high 700 mm deep 04x workbench crossbeams, new Crossbeam type: TS Profile dimensions: 70 x 42 x 3 mm Clear width: 920 mm Material color: fully galvanized 01x worktop, new Wood type: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 03x steel shelves, new Dimensions: 300 x 700 mm Type: H29/D 02x swivel casters, new 02x brake/swivel casters, new Rcjdpfx Aehq Txhem Ted 01x angle set, new for fastening the worktop 08x locking hooks, new Material color: fully galvanized

Condition: good (used), Included in delivery are: 10x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Redpfx Amspl Tdge Tjcd Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Included in delivery are: 28x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Rcjdspl Tdnopfx Am Tod Stackable: yes Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 01x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Rcjdpfx Amspiur As Tod Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 261x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Weight / pallet: approx. 95,00 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. Rcsdpfxopl Tcbo Am Tsd small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: new, We offer you a new workbench from the manufacturer Metal Sistem for sale. Delivery time: approx. 3-4 weeks Technical data for the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in the scope of delivery: 02x Workbench frames, new Material color: fully galvanized Frame type: TS4 including cross and diagonal braces, foot plates The frames are pre-assembled (bolted framework) 888 mm high Rcodpfx Amehq Twyo Ted 700 mm deep 04x Workbench crossbeams, new Crossbeam type: TS Profile dimensions: 70 x 42 x 3 mm Clear span: 920 mm Material color: fully galvanized 01x Worktop, new Wood type: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 03x Steel shelves, new Dimensions: 300 x 700 mm Type: H29/D 01x Angle set, new for mounting the worktop 08x Locking hooks, new Material color: fully galvanized

Condition: new, We are offering a new workbench from the manufacturer Metal Sistem for sale. Delivery time: approx. 3-4 weeks Technical data for the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm The scope of delivery includes: 02x workbench frames, new Material color: fully galvanized Frame type: TS4 including cross and diagonal braces, footplates The frames are pre-assembled (bolted framework) 723 mm high 700 mm deep 02x workbench crossbeams, new Crossbeam type: TS Profile dimensions: 70 x 42 x 3 mm Clear width: 920 mm Material color: fully galvanized 01x worktop, new Wood type: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 02x swivel casters, new 02x brake/swivel casters, new 01x angle set, new for attaching the worktop Rodpfohq Txwox Am Tjcd 04x locking hooks, new Material color: fully galvanized

Condition: good (used), The scope of delivery includes: 1.044x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Weight / pallet: approx. 95,00 kg Weight / 1,044 pcs.: approx. 380.00 kg Remark: These are used stacking transport boxes. There may be scratches, dirt and color defects. color defects may be present. Rodpfx Aopl Tf Eom Tjcd Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: new, We are offering a new workbench from the manufacturer Metal Sistem for sale. Delivery time: approximately 3-4 weeks Technical specifications of the workbench: Manufacturer: Metal Sistem Type: Super 4/5/6 Workbench width: 1,200 mm Workbench depth: 900 mm Workbench height: 900 mm Included in the scope of delivery: 02x workbench stands, new Material color: fully galvanized Stand type: TS4 including cross and diagonal braces, foot plates Rodpfjhq Tqdjx Am Tjcd The stands are pre-assembled (bolted framework) 888 mm high 700 mm deep 02x workbench crossbeams, new Crossbeam type: TS Profile dimensions: 70 x 42 x 3 mm Clear span: 920 mm Material color: fully galvanized 01x worktop, new Wood type: MDF Thickness: 28 mm Dimensions: 900 x 1,200 mm Material color: black 01x angle set, new for fastening the worktop 04x locking hooks, new Material color: fully galvanized

Condition: excellent (used), Approx. 3000 m² steel platform, 2 stories Used, good condition, see pictures Manufacturer: STOW Length approx. 58.5 m Width approx. 54.6 m Height (bottom edge) 3.4 m Height (top edge) 3.7 m Load capacity 500 kg/m² C-profile and sigma-profile construction Fastened with screws and nuts Adjustable grid spacing in length Floor construction is 38 mm chipboard, highly compressed, tongue and groove Underside white, top side grey coated Negotiable price: Offer upon request! Partial sale possible! Dismantled and loaded Goods are in stock. Transport costs available upon request. Inspection possible at any time by appointment. Further information upon request. Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock. Rjdpfjd S S E Ujx Am Tscd (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse) Lenox Trading – Top warehouse technology & heavy-duty racking used & new Description: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of warehouse platforms & steel platforms immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearing orders, we offer a complete, all-round service package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including a thorough clean-up. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full service through our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling and thorough clean-up. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Forkardt 2-Jaw Chuck 1629034, Double-Jaw Chuck, Ø 160mm Index G200 Adapter, Ø140mm ZWS140-K5 Redpfezk Iy Rex Am Tjcd Index G200 Used, as shown in the pictures, in excellent condition From warehouse stock (may have storage marks) Please refer to the pictures for further technical information. Scope of delivery as shown in the pictures. With invoice. The invoice will be enclosed with the shipment.

Condition: new, Year of construction: 2026, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,000 kg, total length: 22,400 mm, total height: 4,500 mm, clearance between the columns: 3,600 mm, shelf height: 4,500 mm, number of shelf rows: 2, frame height: 4,500 mm, frame width: 1,100 mm, load per truss pair (max.): 3,000 kg, shelf length: 22,400 mm, support length: 3,600 mm, 2 rows of pallet racking (M45113615-3) each 11.2 m long, 4.5 m high, 1.1 m deep, each with 3 bays, 3.6 m wide, each with 3 beam levels, load capacity 3000 kg. - 8 upright frames (RM4511 - RAL5019) - 16 base plates, shims, fastening material - 16 floor anchors (ZZBA1210) - 36 individual beams (T3615 - RAL2008) - 2 load capacity signs (BSMcP) Rcjdpfx Aezl N Apem Ted Frames are bolted, not pre-assembled. Freight / Delivery: - max. 20 working days after payment receipt - delivery free to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made to the entire territory of the Federal Republic of Germany; excluding islands! Deliveries to EU countries are subject to individual agreement.

Condition: good (used), MBO K760E S-KTL/6+ Folding Machine with SBAP 82ME Press Manufactured in 2016. Paper format: 760x1100mm Maximum speed: 180m/min High stack feeding, FP-95 pallet feeder 6 cassettes on the first unit 2 knives 1 side cassette after the knife Rcsdpfx Ajzlaimsm Ted Additional veneer cassette. Sound insulation on all units MBO SBAP-82ME stacking press Spare parts and documentation included. The machine is in perfect condition, ready to work.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity per storage section: 3,250 kg, total length: 82,200 mm, total height: 5,000 mm, clearance between the columns: 3,300 mm, shelf height: 5,000 mm, number of shelf rows: 6, clear span: 3,300 mm, frame height: 5,000 mm, frame width: 1,100 mm, load per truss pair (max.): 3,250 kg, shelf length: 13,700 mm, support length: 3,300 mm, 2 single-row pallet racks + 2 double-row pallet racks (8 x M50113313-4) each 13.7 m long, 5 m high, 1.1 m deep, each with 4 bays, each with a clear width of 3.3 m, each with 3 beam levels, load capacity per bay 3250 kg. - 30 frames (RM5011 - RAL5019) - 80 baseplates, shims, screws - 20 spacers/connectors for double rows (ZAbh20) - 120 floor anchors (ZZBA1210) - 144 single beams (T33135 - RAL2008) - 0 impact protection / collision protection (ZRS40901) - 6 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - max. 20 working days after payment receipt - free to construction site / assembly location - unloading from the truck is carried out by the buyer using their own lifting equipment - deliveries are made to the entire territory of the Federal Republic of Germany; Rsdpszizyhsfx Am Tscd excluding islands! Deliveries to EU countries are made according to individual agreement.

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Rcedoxmt Eqspfx Am Ted