Used Rogi Cy355 Inverter for sale (1,900)

Condition: used, GRIESER Type: GFD 11 LST Product: Grieser Laboratory Stand Dissolver Intended Use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can range from thin to pasty. Machine Design: The laboratory stand dissolver consists essentially of the machine stand, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the collet chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (customer-supplied) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed control via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is carried out by switching on the lifting motor. This runs only as long as the push buttons (two-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains in any desired position. Lowering the mixing tool drive To lower the arm, the corresponding buttons (two-hand safety circuit DOWN-DOWN) on the control panel are pressed. Mixing tool change The mixing tool shaft is provided with an M8 connection thread. Depending on the requirement, the mixing tool (stirring blade, customer-supplied) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of construction: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) customer-supplied Mixing tool: Stirring blade, customer-supplied Control panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". Safety-relevant functions such as disconnection from the mains via the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber are excluded. The control panel consists of an illuminated LCD display and film-covered tactile buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. Hedpfx Aszdtfloqpsfn The individual menu screens can be switched through using the up and down buttons. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: repair required (used), Universal Milling Machine HURON MU6 Travel X: 1500 mm Travel Y: 700 mm Travel Z: 600 mm Spindle: SA 40 Spindle speed: from 30 to 2066 RPM Table size: Length 2000 mm x Width 460 mm Spindle motor: 12 CV Scale: 3 axes HEIDENHAIN Centralized lubrication Machine sold as is, some works required: - freewheel of the advances box to be changed - Y-axis locking system needs to be checked Hodez Stlgspfx Aqpefn - the ram inverter is non-functional - there is a leak on the spindle deflector - there is a missing pin on 1 gearbox lever Voltage: 380 V Length: 2200 mm (without ends table) Depth: 2000 mm Total height: 2000 mm Weight: approx 4 T

Condition: good (used), Gas metal arc welding machine, arc welding system, MIG/MAG welding system, inverter welding machine -Manufacturer: Ess, MIG/MAG gas-shielded welding machine -Type: E1-3300 -Max. welding current: 330 A Hjdpfxszrt E Us Aqpjfn -Features: Water-cooled, remote control -Accessories: Hose assembly, ground cable (see photos) -Dimensions: 1020/520/H980 mm -Weight: 116 kg

Condition: used, functionality: fully functional, The conveyor belt is for sale; technical details: Voltage: 220 volts / 50 Hz Frequency inverter: adjustable from 0-6 m/min Hedpfxjz Sxikj Aqpjfn Discharge height: 700 mm Inclined belt length: 1300 mm Usable width: 400 mm Overall width: 600 mm Mobile Height-adjustable Discharge height: 900 mm - 1100 mm Guide plate: 80 mm

Condition: used, Year of construction: 2004, High-capacity band saw with roller feed MG model BMSO 320L Used semi-automatic band saw - High-capacity band saw with roller feed - Progressive hydraulic feed - Chip cleaning brush - Saw speed adjustable via electronic frequency inverter from 20 to 100 m/min - Front millimeter stop of 500mm with electric limit switch Hfsdpjx Ng Sxofx Aqpsn Serial number: 41021 - Blade dimensions: 4160x27x0.9mm - Motor: 1.5kW - Round cutting capacity at 90°: 320mm - Rectangular cutting capacity at 90°: 500x320mm - Square cutting capacity at 90°: 320mm

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 16 A, type of input current: three-phase, volume flow: 6,000 m³/h, intake manifold diameter: 300 mm, total height: 2,000 mm, total length: 3,100 mm, total width: 900 mm, overall weight: 925 kg, compressed air connection: 6 bar, nominal flow rate: 5,100 m³/h, negative pressure: 2,700 Pa, Technical data: Suction nozzle diameter D = 300 mm Residual dust content < 0.1 mg/m³ H3 Filter area 28 m² Cleaning method: compressed air Volume flow 6000 m³/h Negative pressure 2500 Pa Sound pressure level 72 dB(A) Motor/fan 7.5 kW 400 V 50 Hz Operating mode: continuous operation Volume of chip collection container 3 x 165 l Weight approx. 1000 kg Dimensions (L x W x H in mm) 3070 x 900 x 1950 Scope of delivery: Hjdpfx Ajyi Efceqpjfn - Housing, pressure shock-resistant up to 200 mbar, - Chassis, - 3 filling containers for the SMU 6000.1, - Separator with filter, - Fan unit with discharge duct, - Compressed air or vibration cleaning, - Control cabinet with main switch, motor starter and automatic start, - Integrated fire extinguishing system, - Automatic cleaning initiation and integrated filter monitoring with indicator light, - 5 m connection cable with 32 A CEE plug, - Device plug with phase inverter, including frequency inverter workshop tested

Condition: as good as new (ex-display), MIG/MAG welding machine with inverter technology. Three-phase power supply, welding machine. Master Software TERRA PME included. Technical data Power Supply: Voltage (50/60 Hz): 3x400V ±15% Maximum input power: 22.9 kVA Maximum input current: 31.1 A Power factor PF: 0.73 Efficiency: 89% Slow-blow fuse: 25 A Open-circuit voltage: 61Vdc IP protection class: IP23S Hedew Rm Sajpfx Aqpjfn Insulation class: H Power cable: 4x3mm² – 5 m Welding: Setting range: 3–400A Duty cycle MIG/MAG at 40°C: 40% – 400A, 100% – 330A Duty cycle MIG/MAG at 25°C: 100% – 400A Wire diameter: 1.0–1.2 mm (optional 0.6–1.6 mm) Flux-cored wire diameter: 0.9–2.4 mm Aluminum wire diameter: 0.8–1.6 mm Wire feed speed: 0.5–22.0 m/min Wire spool diameter: Ø 200/300 mm Remote control connection: yes

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 90.0 kg range L-W-H 1100 x 550 x 1035 mm Furnishing : - High quality construction - The drive roller is crowned - This automatically centers the sanding belt in the middle of the roll - Fully vulcanized contact roller for the longest service life and the best possible smoothness - Tool-free and therefore faster, uncomplicated change of the sanding belt - Stepless height adjustment - for optimal adjustment of the belt sander to the user - Freely adjustable metal stop Hfodjxabtcspfx Aqpjn - for the optimal and safe guidance of workpieces Use of the large surface grinding area - Belt speed structurally optimized - thus a burning of the workpiece during processing can be largely excluded - Extraction equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector including phase inverter - engine brake - Including sanding belt, grain 60 - dust bag

Condition: as good as new (ex-display), Year of construction: 2018, The TAC CNX is a fully automatic machine that can cross cut straight or angled, coupled with a CNC vertical drilling unit and vertical hopper feed loading leading device. This means a combined operating cycle of feeding, drilling and cutting with no manual operator intervention. The TAC can also just be used for crosscutting if so required. The saw unit cutting angle automatically adjusts to the required angle from the program, while the drilling group is controlled in 3 axis with a 5 spindle point to point head. Programming is quick and simple thanks to the integrated colour graphic touch screen controller. The saw and drilling units are both located in an enclosed safety cabin with electrically interlocked doors, this giving the operator the highest level of protection. The machine is ideal for cutting and drilling for sofa / chair frame rails / parts, general furniture parts, plastics and / or aluminium extrusions. Specification - Heavy duty thick steel monobloc frame electro welded. Hodpfx Aqov Aalyopjfn - Automatic vertical loading system with length capacity upto 1350mm (longer on request). - Feeding via self centering grippers. - Special grippers to allow loading of / feeding of 2 pieces together (on top of each other). - Automatic step advancement movements of the material to be drilled / cut controlled by the NC on the X axis. Programmable movement from 1 to 1050mm, advancement speed max 60 mt/min (adjustable). Special 'macro' for back movement of the piece for material saving. - Outfeed motorised exit conveyor belt for cut / drilled parts 600mm long x 75mm wide. - Saw unit with 4kw motor/ 2800mm adjustable through inverter up to 4000 rpm. Automatic rotation of the sawblade +/- 60 degrees controlled by the CN. - 5 spindle in line vertical point to point drilling unit controlled on 3 axis by CN. - Easy programming with dedicated software with 12" screen an operator interface - Total protection of the the working cabin, interlocked doors with inspection windows. - In conformity with CE safety rules. Working dimensions - Length feeding in one operation 1 to 1000mm (can be increased by setting more positioning steps of the loader. - Width 10 to 200mm cutting at 90 degrees. - Width 10 to 150mm cutting at 34 degrees. - Thickness 10 to 80mm. - Productivity approx 3 seconds per operation (feeding, drilling, cutting = 9 seconds) Complete with optional Vertical hopper feed loader with 3m length capacity Year - 2018 CE Condition - As new ex display [ only used for demonstrations.]

Condition: used, Technical details: power consumption: 350 A total power requirement: 17,5 kVA weight of the machine approx.: 58 kg dimensions of machine: 0,6 x 0,35 x 0,5 m Welding rectifier/inverter with trolley MIG/ MAG:40A / 14V up to 350A / 31,5 V TIG: 10A / 10V up to 350 A E-welding: 15A / 20,5V up to 350A / 34V Hodpfx Asu Nwdkjqpefn Voltage U1: 380 - 415V Cooling type: F (water cooled) Protection class: IP 23 Without hosepackage and welding gun! *

Condition: used, Technical details: power consumption: 350 A total power requirement: 17,5 kVA weight of the machine approx.: 64 kg dimensions of machine: 0,65 x 0,32 x 0,5 m Welding rectifier/inverter MIG/ MAG:40A / 14V up to 350A / 31,5 V TIG: 10A / 10V up to 350 A E-welding: 15A / 20,5V up to 350A / 34V Hfodpfxou Nwd Ds Aqpjn Voltage U1: 380 - 415V Cooling type: F (water cooled) Protection class: IP 23 without hose package without grounding cable *

Condition: new, mileage: 100 km, power: 360 kW (489.46 HP), fuel type: diesel, tire size: 385/55 R22,5, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: black, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, total length: 7,970 mm, total width: 2,550 mm, total height: 4,000 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2025, Equipment: ABS, USB port, air conditioning, central locking, cruise control, electric window regulation, fog lights, fridge, navigation system, parking heater, power mirror, second fuel tank, spoiler, = Additional Options and Equipment = - 2 beds - Adaptive cruise control - Airflow system - Alarm - Aluminum fuel tank - Roof spoiler - FCW (Forward Collision Warning) - Remote central locking - Speed limiter - LDWS (Lane Departure Warning System) - Alloy wheels - Microwave - Radio - Reversing camera - Side fender - Sun visor flap - Stand air conditioning - Inverter - Xenon headlights = Notes = Parking air conditioning Xenon headlights Refrigerator Inverter Microwave Navigation system REMA connector ADBLUE tank 90 l Blind spot camera Reversing camera 4-point air suspension in the driver’s cab Auxiliary heating Adaptive cruise control LDWS FCW USB = Additional Information = General Information Number of doors: 2 Model year: 2026 Registration number: BB-971-S Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Transmission Gearbox: Optidrive, 12-speed, automatic Axle Configuration Axle brand: Anders Brakes: disc brakes Front axle: Tire size: 385/55 R22.5; Max. axle load: 8,000 kg; Steering; Tire tread left: 100%; Tire tread right: 100%; Suspension: parabolic springs Rear axle: Tire size: 315/70 R22.5; Twin tires; Max. axle load: 11,500 kg; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100%; Suspension: air suspension Weights Empty weight: 8,315 kg Payload: 11,185 kg Gross vehicle weight: 19,500 kg Interior Interior color: grey Hfedpfx Asyvqi Ioqpjn Number of seats: 2 History Number of owners: 1 Condition Overall condition: very good Technical condition: very good Cosmetic condition: very good Product safety Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Condition: as good as new (ex-display), Year of construction: 2021, Number of spindles 5 St. Working width 250 mm Working height 160 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-24 m/min. control K2 Basic 7"-Touch KUPER SWT XL-5 AUTOMATIC PLANER AND MOULDER ----- LIKE NEW, showroom machine ! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 - 6,000 rpm, spindle 4.5 to 8,000 rpm - Width and height motor-controlled: left spindle radial upper spindle axial - Feed carrier motor-controlled - Additional motor-controlled positioning: right spindle radial and axial left spindle axial - working width 250 mm TECHNICAL DATA ----- Working width (perimeter of tools 163 mm) 15 - 230 mm Working height(perimeter of tools 163 mm) 10 - 150 mm (perimeter of tools 123 mm) 10 - 160 mm Min. workpiece length: single piece: min. 800 mm piece by piece: min. 300 mm The processing of the work pieces is depending on the following operating parameters: material, wood moisture, tools, diameter of the chip removal and feed speed. If necessary adjustments to the operating parameter have to be done. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 250 mm Usabale length for tools Spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 125 - 160 mm Reference cutter Diameter difference 20 - 25mm to the cutterhead Connecting piece D = 125 mm Quick action lock nut Pro-Lock 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Adjustable table plate to tool radius Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 165 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Adjustment path axial 60 mm Standard profile depth 20 mm Adjustable table plate to tool radius Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7,5 kW (10 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle length minus approx. 6 mm Drive, frequency-controlled 4000 - 6000 rpm Perimeter of tools 112 - 200 mm Pressure shoe pneumatically, via linear guides dynamically adjustable Standard profile depth 20 mm Connecting piece D = 125 mm Aspiration individual adjustable shavings guiding plate Quick action lock nut Pro-Lock 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake 5,5 kW (7,5 HP) Diameter 40 mm Spindle length 235 mm Usable length for tools spindle lenght minus approx. 6 mm Hedpfx Aqewgwmnopefn Drive, frequency-controlled...

Year of construction: 2001, condition: like new (used), flader brushing machine CMC futura bold x 2 6 agergate WIDE UP AGGREGATE, WIDE DOWN AGGREGATE, LEFT AND RIGHT NARROW AGGREGATE X 4 brushing machine flader CMC futura bold x 2 6 agergate WIDE UP AGGREGATE, WIDE DOWN AGGREGATE, LEFT AND RIGHT NARROW AGGREGATE X 4 WIDTH 1200 mm smooth feed adjustment inverters Hfjdpfji A Ivyox Aqpon

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 800 mm, Equipment: lighting, Fully automatic continuous powder coating system (indexed conveyor, pretreatment, Wagner coating, ovens) For sale is a professional, fully automatic powder coating system as a continuous system (indexed process) from the trading agency Klaus Benecke. The system is ideally suited for the efficient coating of aluminum components as well as other metallic parts. A customized configuration of the system is possible upon request! Highlights & Key Components: - Chemical pretreatment: 2-stage spray booth (L=3,600mm, W=1,500mm, H=2,250mm) including degreasing/phosphatizing and rinsing zone with spray ring. - Flash-off oven: Continuous oven up to 120°C with 40kW LPG gas burner (Riello). (other energy supply possible) - Powder coating booth PVC 3,600: Antistatic plastic booth with mono-cyclone (12,000m³/h extraction capacity) and after-filter. - Wagner Premium application technology: 2 lifting units, 6 automatic PEA-C4 guns, 2 manual guns and control system designed for up to 10 guns. - Curing oven: Continuous oven up to 220°C with 80kW LPG gas burner (Riello). (other energy supply possible) - Conveyor system: Cardin chain conveyor C-100 in indexed operation (50m conveyor length, 54m chain). - Control system: Modern PLC control system with 7" color display (Easy View), inverter and modem for remote maintenance. Technical data: - System type: Powder coating system (continuous / indexed process) - Max. workpiece dimensions: (L x W x H) 2,500 x 800 x 1,200 [mm] - Max. load per carrier: 100 kg/traverse - Estimated throughput: approx. 50 m²/h (both sides) - Material: Aluminum / metal parts - Conveyor belt: Chain Cardin C-100 (50m) - Burner output: Dryer / Oven 40kW / 80kW (LPG gas or other energy source on request) - Control system: PLC with 7" touchscreen Condition: New system / Project Components included in scope of supply: - Chemical pretreatment (2-stage spray booth) - Flash-off oven - Powder coating system (PCB 3,600) - Wagner application technology - Powder curing oven Hfsdpfx Aqoum Uflepjn - Conveyor system - Electrical control system - Services & accessories

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm mm cutting width 300 mm Control NC capacity 90 degrees: flat 330x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 3,3 x 2,83 x 2,23 m Furnishing: - fully automatic electro-hydraulic band saw with additional semi-automatic, semi-automatic-dynamic and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic-dynamic and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle to make cuts outside of series production can be carried out directly without programming. - Numerically controlled band saw machines with the new, especially from MEP Windows CE based controller developed for automatic machines. - User interface with touch screen display of 7 and mechanical buttons for the operating functions of the sawing machine. - Stepless regulation of the cutting speed from 15 to 100 m/min Frequency converter (inverter). - Material feed with stepper motor via ball screw Hfedpfjfg E H Ejx Aqpjn - which is mounted on opposite ball bearings; Single stroke 600 mm - repeatable to cut to any length. - Automatic monitoring of cutting load - through a servo valve mounted directly on the cylinder. - The coolant pan is installed in the base frame - Chip clearing brush. - Bimetal saw band for solid and profile material. - Tools and instructions for use with a list of spare parts

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) Hfedpfx Asg Ailcoqpjn 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Year of construction: 2005, condition: excellent (used), ambulance class 3A Hfjdsgv U S Aopfx Aqpen year of production 2005

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Fully refurbished, in stock, warranty 12 months, no solvent oven! - Maximum temperature 250 °C - Total steam volume 20.5 m³ - Usable dimensions (L x W x H) 2300 x 2750 x 2200 mm - Control system Jumo Imago 500 Hfodpettbf Ujfx Aqpsn - Heating power 36 kW - Maximum load of the furnace car 6000 kg, electrically driven - Electric inlet and outlet air dampers Belimo - Exhaust fan controlled via frequency inverter - Installation dimensions (L x W x H) 3000 x 3000 x 3125 mm plus track in front of the oven - Own weight approx. 3500 kg - Freestanding control cabinet - Documentation - Electrically tested and with current DGUV test report Inspection in our warehouse by appointment. Hearth furnace, oven, industrial oven, convection oven, chamber convection oven, annealing oven, heat treatment oven, drying oven, tempering oven, chamber oven, drying cabinet, hardening oven, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Condition: used, Year of construction: 1979, Technical details: turning diameter over bed: 540 mm turning length: 630 mm centre distance: 900 mm center height over bed: 270 mm center height: über Hinterschlitten: 138 mm Turning diameter: über Hinterschlitten: 250 mm longitudinal feed: 700 mm facing movement : 80 / 75 mm revolution per minute: 1,8 - 450 bei 8x steples U/min clamping diameter: 26 mm range of feed in x - axis: 12 step / 0,063 - 0,63 mm/U range of feed in y - axis: 36 step / 0,070 - 1,11 mm/U tailstock quill: MK5 mm tailstock quill stroke: 250 mm Total power requirement: 7,0 kW machine weight approx.: 3,76 t dimension machine xH: 3,2 x 1,2 x 1,8 m Application: Mainly for relief turning and relief grinding of cutting tools (especially hobs with and without thread pitch). Hodpfsvbhv Rex Aqpjfn Back turning and relief grinding is possible from the front, the rear and in the axial direction of the machine. Main drive via 8-stage manual gearbox. Feed gearbox is designed as a 12-stage manual gearbox. Swivel range of the rear slide = 360deg. Swivel range of cross slide = 360deg. Lathe chuck is cone disc Ø 200mm with MK5 Equipment: turning mandrel Ø 49,5 x 400mm Measuring system ARBAH-L 3+1 Inverter FRENIC 5000G11 i.D. *

Condition: used, axle configuration: 1 axle, first registration: 07/2008, total length: 9,540 mm, total width: 2,550 mm, suspension: air, tire size: 215/75R17.5, wheelbase: 4,800 mm, color: black, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = - Toolbox Hfedpfxoxz D Urs Aqpsn = Notes = GS semi-trailer. First registration: 16-07-2008. Maximum weight: 11,000 kg. Insulated walls. Victron inverter. Kabola heating system. Air conditioning. Battery pack, 4 x gel batteries. 1500-liter fresh water tank. 2 x 800-liter grey water tanks. Kitchen equipped with: Stovetop. Microwave. Combination oven. Large refrigerator with freezer compartment. Seating area with speakers and TV. In the upper section, the camper is equipped with: Shower. Sink. Toilet with ventilation. 2 x double sleeping spaces, both sleeping areas are equipped with: Storage space. Lighting. Roof window and side windows that can be opened. Various 220V power outlets. Under the sleeping area is a workshop, which is equipped with: Lighting. Workbench. Cabinet space. Drawers for small tools and materials. Sink. Refrigerator. Various 220V power outlets. On the right exterior side, the camper is equipped with an electric sun awning. TV with speakers. = Further information = Tire size: 215/75R17.5 Brakes: Drum brakes Suspension: Air suspension Unladen weight: 4,210 kg Payload: 6,790 kg GVWR: 11,000 kg Price: On request Model number: CAMPER TRAILER / MOBILE HOME = Company information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki) We make every effort to provide accurate information. Nevertheless, no rights can be derived from the published texts.

Condition: good (used), mileage: 834,435 km, power: 353 kW (479.95 HP), first registration: 01/2021, fuel type: diesel, tire size: 385/55 R22,5, axle configuration: 6x2, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, number of gears: 16, emission class: euro6, suspension: steel-air, total length: 6,490 mm, total width: 2,550 mm, total height: 3,990 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2021, Equipment: central locking, cruise control, electric window regulation, fridge, navigation system, power mirror, second fuel tank, = Additional Options and Accessories = - 2 beds Hfjdpfxszvqkij Aqpjn - Aluminum fuel tank - Remote central locking - Speed limiter - Alloy wheels - Lift axle - Air horn - Sleeper cabin - Sun visor - Converter = Notes = The heater control does not work! Crack in the windshield Axle load indicator Saddle height: 117 cm Special interior equipment Inverter New tachograph Refrigerator Leather interior Alloy wheels Navigation system Lift platform Remote spotlights = Additional Information = General Information Number of doors: 2 Model year: 2026 License plate: 45-BRB-8 Technical Information Number of cylinders: 6 Engine displacement: 11,120 cc Axle Configuration Axle brand: Other Brakes: Disc brakes Front axle: Tire size: 385/55 R22.5; Max. axle load: 8000 kg; Steerable; Tire tread left: 45%; Tire tread right: 45%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 385/55 R22.5; Lift axle; Max. axle load: 7500 kg; Steerable; Tire tread left: 35%; Tire tread right: 35%; Suspension: Air suspension Rear axle 2: Tire size: 315/70 R22.5; Double tires; Max. axle load: 11500 kg; Tire tread left inner: 45%; Tire tread left outer: 45%; Tire tread right inner: 45%; Tire tread right outer: 45%; Suspension: Air suspension Weights Unladen weight: 7,489 kg Payload: 18,511 kg GVW: 26,000 kg Interior Interior: gray, leather Number of seats: 2 Maintenance, History, and Condition Number of owners: 1 APK (Technical Inspection): Valid until 02.2027 Product Safety Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, type of cooling: water, Equipment: cabin, For sale is a ready-to-use, compact, plug-and-play welding cell: OTC Easy Arc MIG/MAG 3.03. This system combines precise robotic technology with a high-performance, high-end welding power source and a fully automatically controlled horizontal rotary positioner. It is ideally suited for the automated, cost-effective production of small and medium-sized series. The entire cell is mounted on a stable base frame with a welding table/perforated plate and can be easily integrated into your production process. Technical highlights & components: Robot FD-B6: Highly dynamic 6-axis articulated arm robot, optimized for arc welding with internal cable routing (6 kg payload). Controller FD11: Modern robot controller for precise path guidance, including an ergonomic teach pendant for quick programming. Welding power source Welbee Inverter P400: Pulse welding power source (400 A) for spatter-free welding of steel, stainless steel, and aluminum, even at high welding speeds. Easy Arc PB250 Positioner / Horizontal Rotary Table: Fully controlled additional axis (up to 250 kg payload) for precise workpiece rotation, which enables welding in the optimal weld pool position, even with complex components. Safety concept: Complete enclosure including welding protection viewing windows and CE-compliant safety technology for direct use in a workshop. Condition & scope of supply: The system is in very good, fully functional, and ready-to-use condition, as it has been used only rarely. Scope of supply: Complete welding cell as described, including welding torch equipment, cable package, and documentation. The system is available immediately and can be inspected under power after consultation. Hfedszvqunopfx Aqpen Technical data at a glance: Manufacturer: OTC DAIHEN Europe GmbH Model: Easy Arc MIG/MAG V03.03 Year of manufacture: 2024 Power connection: 400 V / 50 Hz B2B sale with exclusion of all warranties. Subject to prior sale. Net price plus VAT ex Philippsburg. Loading can be arranged on-site. Components: Robot welding cell as shown OTC welding robot Easy Arc MIG/MAG 1.03, robot FD B6 Easy Arc PB250 (Move) programmable positioner for automatic component alignment Controller FD11 Welding machine Welbee P400 Additional equipment: Water cooling If you have any questions or require further information, please send us a message or call us. An inspection and demonstration are possible at any time.

Condition: used, mileage: 753,492 km, power: 265 kW (360.30 HP), first registration: 05/2016, fuel type: diesel, empty load weight: 10,350 kg, maximum load weight: 8,250 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 5,300 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of seats: 2, loading space length: 7,100 mm, loading space width: 2,450 mm, loading space height: 2,800 mm, Equipment: ABS, air conditioning, cabin, central locking, compressed air brake, cooling unit, cruise control, differential lock, electronic stability program (ESP), navigation system, onboard computer, parking heater, power assisted steering, seat heater, tail-lift, traction control, trailer coupling, * German vehicle * 1st owner * Condition: see photos * Special vehicle for temperature-controlled art and furniture transport * Full-fledged furniture container with cooling * 2x Toshiba Inverter * Undercarriage units with diesel and electric drive * Furniture container dimensions: 7.10 x 2.45 x 2.80 m * Walls with felt lining * Screen-printed loading floor * Lashing rails and load securing in wall, ceiling, and floor * Container with side door on the right * Tail lift, Palfinger * Type MBB C1500S with 1,500 kg load capacity * Trailer coupling * Trailer load 18,000 kg * Total weight 40,000 kg * Air suspension, front and rear * XXL comfort cab, air-suspended * 2 beds * 2 air-suspended comfort seats * 2x seat heating * Refrigerator Hjdszwxtuopfx Aqpjfn * Automatic climate control * Auxiliary heater * Lane keeping assist system * Air horn * Adaptive cruise control * Multifunction steering wheel * Navigation * Roof air conditioning * Bluetooth phone * Electric windows * Electric, heated mirrors * Electric sun blind * Electric engine brake * Electrically tilting cab * ASR/ESP * Wheelbase 5.30 m * GVWR 18,600 kg * Unladen weight 10,350 kg * Payload 8,250 kg If a new TÜV (technical inspection) is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV (German Social Accident Insurance) certificate, a new SP (safety report), or a new UVV (accident prevention regulations) certificate. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods so that the buyer does not have any false impressions about the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: used, Year of construction: 2025, Overview This rotary counter-pressure filler and seamer was manufactured in 2025 by Italy Framax. The Cantastic 6000-EP is designed for filling and seaming of cans for beer, soft drinks, and alcoholic RTDs. It is currently still installed and can be visited on request. Technical data - Capacity: - approx. 70 cans/min (500 ml) Hedpozbhi Isfx Aqpjfn - approx. 100 cans/min (250 / 330 ml) - Formats: 250 ml / 330 ml / 500 ml (standard, slim, sleek cans) - Application: Filling and seaming of cans (beer, soft drinks, RTDs) - Configuration: 10 filling valves / 2 seaming heads - Filling system: Counter-pressure filling - Filling pressure: approx. 0.15 – 0.4 MPa - Filling temperature: approx. 1 – 4 °C - CO₂ management: Pre-purging and undercover gassing, oxygen reduction system - Seaming system: Lid size 202 (200 optional), manual lid feeding - Control system: Siemens S7-1200 PLC with HMI touchscreen - Drive system: Frequency inverter (Danfoss), unified drive - Utilities: - Power consumption: approx. 5 kW - Compressed air: approx. 0.4 Nm³/h at ≥ 0.4 MPa - CO₂ supply: ≥ 0.3 MPa - Water consumption: approx. 0.2 m³/h - Dimensions: approx. 3,153 × 1,980 × 2,350 mm - Weight: approx. 5,500 kg Scope of Delivery - Filler and seamer monoblock | Framax | Cantastic 6000-EP | Not provided | Rotary counter-pressure filler with integrated seamer - Control system | Siemens | S7-1200 | PLC with touchscreen HMI - Drive system | Danfoss | Frequency inverter - Filling valve cores | 1 set - Seaming rollers | 1 set (#1 and #2) - Seaming chuck | 1 unit - Can mouth seals | 10 units - Filling valve seals | 10 sets