Used Rotary Sieve for sale (4,431)

Year of construction: 2012, condition: good (used), Separator sluice / cell wheel sluice Nestro, year of manufacture 2012, for the separation / differentiation of paper chips or paper edge sections. Technical data: Manufacturer: Nestro Lufttechnik GmbH Year of manufacture: approx. 2012 Motor: 4 kW Volume flow rate max. 28000 m³/h Inlet diameter max.: 450 mm Speed: 22 rpm Rotor width: 1500 mm Hnjdszt Ipkopfx Airot Rotor diameter: 1200 mm Dimensions: 2200 x 2200 x 2500 mm (L x W x H) Weight: approx. 3000 kg Note: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. The video can be found at the top of our website or on our YouTube channel. Inspections, including under power, are possible at any time by arrangement. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offers are non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: like new (used), Year of construction: 2021, machine/vehicle number: B440, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, rotational speed (max.): 300 rpm, rotational speed (min.): 60 rpm, Equipment: CE marking, rotational speed infinitely variable, OMAC B440 3600 VX Hygienic Rotary Lobe Pump Unit – Fully ATEX Rated – 2021 Complete hygienic rotary lobe positive displacement pump unit by O.M.A.C. S.r.l. (Italy), professionally decommissioned from an INEOS manufacturing facility. Fully matched ATEX drivetrain — pump, gearbox and motor all Category 2G (Zone 1) rated, suitable for installation in hazardous area environments. Suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Ready to install. Pump: Manufacturer: O.M.A.C. S.r.l., Italy Model: B440 3600 VX Year: 2021 Wetted parts: AISI 316L stainless steel Connections: 4" (DN100) hygienic tri-clamp ATEX: II 2G Ex h T4 Gb Gearbox: Motovario HR 101M helical reducer Ratio: i = 4.88 Torque: 530 Nm ATEX dual-rated Motor: Cemp E3AB70 132M-4 — 7.5 kW 400V Δ / 690V Y, 1462 rpm ATEX: Ex db IIB T4 Gb IP55, IE3 efficiency Inverter-rated (S9 variable speed duty, PTC 120°C thermal protection) Pump shaft speed approx. 300 rpm at 50Hz (approx. 60–300 rpm range on inverter) Complete unit mounted on a stainless steel baseplate with forklift access. 3 identical units available — matched factory batch with consecutive serial numbers across pump, gearbox and motor. Price is per unit. Condition: New other. Excellent, clean condition throughout — see photos. Inspection welcome prior to purchase. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. Please contact us for further information or to discuss delivery and installation options. Hnodpfx Ajzmgdaeirot

Condition: good (used), Rotary actuator for air flaps, air flap rotary actuator -Manufacturer: Siemens -Type: GBB161.1E -unused from: warehouse clearance -Quantity: 2 available -Price: per piece Hsdpfx Aisd Tn Ddsrsnt -Dimensions: 340/105/H105 mm -Weight: 2 kg

Condition: used, Year of construction: 2010, table length 2000 mm table width 1800 mm table load 12,5 t longitudinal adjustment 1250 mm longitudinal feeds of table 0,63-2000 mm/min table height 920 mm groove width 36 mm Control moviaxes SEW total power requirement 10 kW weight of the machine ca. 7,5 t Hsdoztrvnspfx Airent dimensions of the machine ca. 3,7 x 2,1 x 1 m

Year of construction: 1988, condition: used, table diameter 400 mm table load 0,126 t Hsdpfx Aioipyx Njrent table height 100 mm weight 126 kg Dividing rotary table with 400 mm diameter of a Heckert FSS 400.

Condition: used, Year of construction: 2010, table diameter 1000 mm table load 0,5 t table height 300 mm total power requirement 12 kW Hjdpfx Aoznndksirsnt weight of the machine ca. 0,5 t dimensions of the machine ca. 1 x 1,2 x 0,3 m Permamantly rotationg table,adjustable in speed. Basic of table has a diameter of 570 mm. Table diameter increased to 1000 mm. Table was mounted on a surface ginding machine. Table will be delivered with a new spare motor.

Year of construction: 2026, condition: new, 1800 mm diameter vibrating sieve with two SUS304 stainless steel decks vibrating motor 3 kW, 1460 rpm, 400 V, 50 Hz Hsdpozzkpvsfx Airent Mesh size of choice

Year of construction: 1989, condition: good (used), For sale is a fully functional welding positioner from APS. Model 1000 E Year of manufacture: 1989 Machine number: H1-008 Speed range: 0.3-1 rpm 64mm hollow shaft Tilts left and right approximately 135° Hodpfxjcl Ttvo Airsnt Space requirement: approximately 1700x1700mm Weight: 750kg

Condition: used, Riveting machine, double riveting unit with rotary indexing table, DUNKES Type DN 4 Rotary table, rotary indexing table with SIEMENS control Machine No. P 81 - 5458, Year of manufacture 1982 / 2009 Clamping force 40 kN Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Overhang 190 mm Rivet head stroke per riveting unit approx. 60 mm Rivet spindle speed approx. 1400 rpm Installation height, tool - counter-tool max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Mains connection 380 Volt, 50 Hz - Rotary table, indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame in relation to the rotary table - Table size Ø 295 mm for holding round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with lead screw, positioning via adjustable microswitch - Modernization of the control system and conversion of the servo drive in the rotary table in 2009 Hnodpfx Ajdzp T Nsirjt - New electrical control cabinet with Siemens Simatic Panel - Year of manufacture 2009 - Riveting time continuously programmable - Riveting pressure adjustment continuously adjustable via pressure gauge - Micrometer stop for limiting the stroke of the counter-rotating riveting units, 0-60 mm Space requirement L x W x H 3200 x 1250 x 2400 mm Weight approx. 2500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed on the support disc and fixed with straight rivet pins. The counter-rotating riveting unit rivets the pin simultaneously from both sides. The controlled table automatically rotates to the next working position. Ideal for saw blade manufacturers and repair companies. Or for the construction of a special machine. The riveting unit can also be easily removed and used as a conventional riveting machine by creating a suitable counter-tool.

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003585 - Manufacturer Code: 205367 - Condition: As new (showroom item) - Functionality: Fully functional - Compatible machine: - If interested, we offer an overhaul service, please contact us. 1KG - 20X20X20 Hedpfx Aisyrn Ufjront

Condition: used, Year of construction: 1995, Rebuilt in 2020 Printing Specifications: 5 wet-offset printing towers Variable print repeat: 14”–26” Printing width: 475 mm Web width: 485 mm Mechanical speed: 250 m/min 360° register control Manual ink duct 24” printing inserts Plate thickness: 0.30 mm Sticky-back blanket thickness: 0.95 mm 3-cylinder printing configuration Unwinding & Rewinding: Hsdpfxozzaz Us Airont • Unwinder for reels up to Ø1270 mm • Unwind shaft • Rewinder for reels up to Ø1270 mm • Rewind shaft Ø70 mm Web Handling: • BST web edge control • BST WebVideo inspection system • 2 turner bars with air blower (after printing units 1 and 2) Drying & Dampening: • GEW UV drying system, 5 lamps (2020) • Power cabinets for UV system • Technotrans dampening cooling system with alcohol dampening Die Cutting & Finishing: • Servo-driven die-cutting unit • Waste rewinder • Punching and perforation station including: o Common paper infeed with pull wheels o Length perforation o Space for two file-hole groups o IMR block with duplex sprocket punching (245–485 mm) o Pile marking device o Length slitting o 24” file-hole punch unit o Common anvil cylinder for two cross-perforation cylinders up to 28” o Variable zig-zag folder (5”–16”) o 2 × 24” cross-perforation cylinders Control & Equipment: • Main drive motor frame • Press control panel • Main electrical cabinet • Plate bender

Condition: good (used), Rotary table Storage location: 3135 Hnodezy Rm Ejpfx Airot Diameter: 380 mm Graduation on the table: 360° rotatable Height: 110 mm Center hole: 40 mm Number of clamping slots: 7 Condition: very good Weight: 50 kg Dimensions: 500 x 380 x 140 mm

Condition: used, Year of construction: 2003, machine/vehicle number: M317, Technical Specifications & Performance DataThis ACMA rotary filling monoblock integrates a precision filler and capping unit with an automatic cap sorter, delivering reliable throughput for liquid detergent production and industrial packaging applications. As a second hand solution ideal for a used bottling line, it combines compact footprint with robust engineering.Manufacturer: ACMA (Corniani division) Model: RCCA-1562 Manufacturing year: 2003 Production speed: up to 105 bpm depending on format Format performance: 0.45L: 95–100 bpm; 0.5L: 100–105 bpm Compatible formats: 0.45L, 0.5L Container handling: Designed for PET and Glass bottle handling (with appropriate change parts) Electrical supply: 380 V, 50 Hz, 10 kW Auxiliary circuits: 24 V Pneumatic pressure: 6 barAdvanced Automation & Control SystemsThe monoblock features rotary motion for steady, synchronized bottle transfer between filling and capping stations. The integrated cap sorter ensures consistent cap orientation and feeding to the capping heads, supporting sustained high-speed operation. Standard industrial control architecture enables precise timing, smooth acceleration curves, and consistent torque application during capping.Automatic cap sorting and feeding to the capperCoordinated filler-capper synchronization for stable continuous flowIndustrial control logic for accurate cycle timingOperator-friendly interface and routine changeover adjustmentsElectrical protection and auxiliaries matched to 24 V control circuitsProduction Line Integration CapabilitiesThis filling monoblock integrates seamlessly within a complete used bottling line. It can operate inline with upstream bottle preparation equipment and downstream inspection, labeling, and packaging machinery. Format changes between 0.45L and 0.5L are supported with the correct set of format parts.Standalone or inline operation with conveyorsInterfaces readily with labeling, inspection, and end-of-line packaging systemsSuitable for liquid detergents, household cleaners, and similar chemical products when configured accordinglyFlexible container materials subject to starwheel and guide change partsMachine Condition & Maintenance HistoryOffered as a second hand rotary filling monoblock, the unit presents defined performance data for 0.45L and 0.5L formats. It is positioned for quick recommissioning in an industrial packaging environment, with capacities appropriate for medium-speed production. Availability and readiness support rapid deployment in existing lines.Operational Performance & VersatilityWith speeds up to 105 bottles per minute, this ACMA monoblock is engineered for consistent fill accuracy and secure closure application. The integrated sorter enhances capping efficiency and minimizes misfeed-related downtime. The rotary platform supports smooth bottle handling, reducing scuffing and maintaining presentation quality across PET or glass bottles when equipped with the correct handling parts.Stable rotary handling for reduced container stressHigh capping reliability supported by integrated sortingAdaptable to multiple home care and chemical categories with appropriate componentsBalanced... Hnodpfjyr Hu Djx Airot

Condition: used, Year of construction: 2023, machine/vehicle number: ET195, Used adhesive labeling machine PE labelers overhauled up to 6000 BPH Complete transformation from a mechanical machine to an electronic machine Used rotary labeler overhauled up to 6000 complete replacement of the head with new plates, motors, boards, and double jacks for optical centering replacement of groups with 3 new adhesive groups PE labeler or PackLab type. complete overhaul of the glue group for the l-shaped seal for the PE labelers review of seal stretching pliers new electrical panel new complete and CE standard protections for the PE labelers installation of the touchscreen and plc control panel new certifications for Used labeler rotary machine overhauled up to 6000 a bottle passage format for the Used adhesive labeling machine overhauled up to 6000 composed of: auger entry/exit star counter star 11. one seal format per glue group for adhesive rotary labeling up to 6000 complete with: Hnodpfevlnv Esx Airst 1 warehouse 3 blades 1 hook drum Delivery time equipment of the Used adhesive labeling machine overhauled: This PE labeler can be serviced and delivered in approximately 90 working days from the order and payment of the first deposit. It is important to approve all technical drawings and label measurements for the PE labelers. This allows orders for replacement materials for the PE labelers to be prepared in an efficient time. In this particular historical period, we encounter very long delivery dates for electrical materials. Is for this reason that it is very important to plan the entire project in the correct direction to avoid wasting time for the PE labelers overloaded. For the installation of the PE labelers we only use our own direct workers, to give safety to our customers. We follow the entire process from start to finish and to the commissioning of the new or used machinery.

Condition: used, machine/vehicle number: R92, Used KOSME rotary wine filler with rinsing Technical Specifications & Performance DataThis rotary rinser-filler is engineered by KOSME for precise, reliable wine bottling within industrial packaging environments. The carousel configuration ensures consistent bottle handling and steady throughput suitable for beverage production, including second hand and used bottling line integrations.Machine type: Rotary rinser-filler (carousel)Manufacturer: KOSMEPrimary application: Still wine fillingProduction speed: Typically a few thousand bottles per hour (configuration-dependent)Bottle size range: Approx. 0.25L to 1.5L (typical 0.75L wine format)Containers: Glass bottlesFilling principle: Level-controlled gravity or light vacuum (light depression)Rinsing: Integrated rinser with three spray stagesProduct contact materials: Stainless steelEnclosure: Glazed, lockable safety guardingAdvanced Automation & Control SystemsThe machine supports both automatic and manual operation to adapt to production needs and changeovers. Operator controls promote safe, efficient handling while maintaining high-quality filling.Automatic/manual mode selectorManual jog and machine start/stop controlsSpeed control for carousel rotation and process optimizationEmergency stop and reset-to-zero functionsLight signal for status indicationGate interlock and glazed safety enclosure for operator protectionDedicated rinsing control with three spray stagesProduction Line Integration CapabilitiesDesigned for seamless integration into a used bottling line or operation as a standalone unit, this rotary rinser-filler interfaces easily with upstream depalletizing/inspection and downstream labeling, capsule application, and secondary packaging machinery. Its glass-bottle handling and stable carousel motion support consistent infeed and discharge on standard conveyor systems.Inline or standalone operationCompatible with conveyors and accumulation systemsFormat range suited to common wine bottles: 0.25L, 0.75L, 1.5LIdeal for beverage production environments focusing on wineMachine Condition & Maintenance HistoryThe machine has operated in a well-maintained environment and features a full glazed, lockable enclosure that preserves hygiene and safety. Backed by KOSME engineering, spare parts and service support are readily accessible through established industrial channels. The overall condition is aligned with second hand equipment prepared for reliable start-up in professional beverage production.Operational Performance & VersatilityPurpose-built for still wine, the level-controlled gravity or light-vacuum system ensures consistent fill levels across a range of formats without over-pressurizing glass containers. The stainless steel product-contact surfaces support hygienic operation and quick cleaning, while the integrated rinser with three spray ... Hjdpfx Aezrgrbeirent

Condition: used, Year of construction: 2003, machine/vehicle number: M321, Used Acma rotary trigger filling monoblockTechnical Specifications & Performance Data2003 Acma RC15/6-200 with 15-valve rotary filler (gravity/light depression) and 8-head capping turret for 28 mm plastic screw closures. Rated speed 5000 Bottles/hour. Configured for detergents in glass or PET containers across 500 ml, 650 ml, 750 ml, 1 L formats. This used rotary filling machine provides compact, synchronized filling and capping on a single carousel.Manufacturer: AcmaModel: RC15/6-200Year of manufacture: 2003Machine concept: Rotary filling monoblock with integrated capper and cap sorterCategory: Filling MonoblockSpeed: 5000 Bottles/hourProduct types: DetergentsContainer types: Glass, PETFormats: 500 ml, 650 ml, 750 ml, 1 LFiller: 15 mobile nozzles; gravity/light depressionCapper: 8 heads; cap size 28 mm; neck 28 mm; cap type: plastic screwCompliance: CE markedAdvanced Automation & Control SystemsThe RC15/6-200 couples a synchronized rotary filler and capper with automatic cap sorting/feeding. Format parts enable rapid changeover between 0.5 L to 1.0 L. Operator controls coordinate turret timing and capping torque for stable throughput. This monoblock filling machine minimizes handling steps while maintaining fill accuracy and closure quality.Synchronized rotary filler/capper with integrated cap sorterQuick-change format parts for multiple bottle sizesControlled torque application and repeatable fill accuracyCE-compliant guarding and safety logicProduction Line Integration CapabilitiesDesigned for inline placement with upstream bottle handling and downstream equipment. Interfaces cleanly with infeed/outfeed conveyors, labeling, and case packing. For trigger applications, the capping stream can be paired with a downstream trigger capper when required.Inline operation with upstream and downstream conveyorsCompatible with screw-closure ecosystems and downstream trigger cappersFormat scope: 0.5 L, 0.65 L, 0.75 L, 1.0 LSuitable for integration in existing or new linesMachine Condition & Maintenance HistoryOffered in ready for operation condition. This used rotary filling machine is presented as operational equipment; standard integration and commissioning procedures are recommended. Original CE marking is present.Operational second-hand equipmentReady-for-operation conditionOriginal CE markingOperational Performance & VersatilityConfigured for 28 mm plastic screw closures on 28 mm necks. Smooth rotary handling supports consistent output across 500 ml to 1 L. The monoblock filler maintains stable cycles for detergent products in glass or PET.Consistent gravity/lig... Hsdjymdpzspfx Airent

Year of construction: 2026, condition: new, Our KVK 5 is a semi-automatic rotary arm wrapper, which has the advantage over our wrappers with turntable that your pallets can be placed at ground level for the wrapping process. Equally ideal for light, unstable and heavy packaged goods, as there are no centrifugal forces and no load-bearing capacity to consider. In addition, the KVK 5 model is equipped with a pre-stretch system for 250% elongation. This pre-stretching system allows you to produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. With the KVK 5, there is only minimal contact tension, so that even light packages are not pulled off the pallet. The only thing that still has to be done manually with this wrapper is applying and cutting the film. The machine weight of almost 1000 kg shows how solid and stable this wrapper is. With its rotating arm, it can wrap pallets up to a maximum dimension of 1.00 x 1.20 x 2.40 m. Hnjdpfx Ajzr Hw Doirjt With adjustable speeds of the rotating arm and film carriage, as well as a pre-stretching unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. In addition to an optional photocell for the detection of dark packing goods or black film, this wrapper can be supplied either for wall mounting or with the feet shown. We recommend this model if it is important to you not to have to overcome a ramp with your goods - for example because they are too heavy or unstable. The fact that the rotating arm in this design rotates around the pallet also avoids any centrifugal force. Together with the low contact tension of the pre-stretch system, this also makes the KVK 5 ideal for very light packaged goods. For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: used, functionality: fully functional, Year of construction: 2022, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, pipe diameter (max.): 320 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, table width: 1,500 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: centralized greasing system, cooling unit, We offer this used laser cutting machine with a rotary table, manufactured by Otinus, model VF1530-3000W, year of manufacture 2022. Machine name: Fiber laser cutting machine Model: VF1530-3000W Working area: 1500×3000 mm Laser power: 3000 W Serial number: 2022011503J Date of manufacture: 2022,1 If you have any questions or require further information, please send us a message or contact us by phone. Hnjdpfezzx Ruox Airot

Condition: used, Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 1904150116, year of last overhaul: 2025, overall weight: 6,800 kg, We offer this used Forrec Granulator - 1000 R.A. rotary shear, year of construction 2019. Manufacturer: Forrec Model: Granulator - 1000 R.A. Hjdpfozmyufsx Airjnt Year of construction: 2019 Condition: used Category ID: 552 Type ID: 2731 Machine type: rotary shear If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 1987, condition: used, Electric motor power: 1.5kW, supply voltage: 380V, connected load: 4.5kVA, drive: fully electric. An on-site inspection is possible. Hnedpfxjzxr Rpj Airst

Condition: excellent (used), Kongskilde cyclone separator with rotary valve For sale is a Kongskilde cyclone separator, including an installed rotary valve with gear motor and connecting hose. This unit is suitable for separating and discharging chips, granules, dust, or similar materials in dust extraction and conveying systems. The cyclone is mounted on a sturdy frame and stands on a transport pallet. Scope of supply as shown in the photos: Kongskilde cyclone separator Rotary valve with drive Frame Connecting pipe and flexible hose Hjdpfxozrlznj Airsnt Inspection at our warehouse is possible by appointment. If you have any questions or are interested, please do not hesitate to contact us.

Condition: good (used), Infotec 1008 Rotary CNC machine adjustable RPM, manual or auto, 3Ph Hedpfsx Ai T Nox Airsnt

Condition: like new (used), Year of construction: 2019, Ref: 11072 . 2019 Horizon RD-4055 Dual Cylinder Rotary Die Cut System Like new, ex demo condition - ONLY 5,000 on the counter! Efficient production with new separator and card stacker for labour saving operation. Features: • Die cutting, waste separation and stacking in one pass for efficient production. • A wide range of applications can be processed such as business cards, greeting cards, labels and light packages. • Maximum 6,000 sheets can be processed. • 21-up round corner business card production can processed at 126,000 cards per hour. • Simple and easy operation without relying on a skilled operator. • Uniquely designed servo motor controlled ‘Repeat-cut’ feature allows multiple-up cuts from a single up die to minimize die cost. • Ruggedly constructed yet compact compared to normal die cutters. • Various delivery options are available to process a wide range of applications. • Die-cutting and Kiss cutting can be performed simultaneously by using a die which has two different blade heights, ideal for making stickers and labels. Hnjdsymmqzopfx Airot • Creasing can be achieved to avoid image cracking. Suitable for boxes, pocket folders and greeting cards which require additional folding processes after die cutting. • Repeat-cut enables the running of multiple up imposed applications with a smaller die to reduce die cost (Up to 8 repeats) Equipped with: TOUCH PANEL: Both setup and control can be done through the intuitive touch screen. After mounting the upper and lower die, the system can be set up by simply inputting sheet size and product size. The graphical illustrations on the screen are simple and easy to understand. FEED SECTION: Vacuum belt feeding enables superior feeding with easy setup and operation. An ultrasonic sensor is used for double feed detection on a wide range of substrates. The optional code reader BR-N4055 enables job separation for easy handling. TRANSPORT SECTION: Sheets are registered by vacuum belt and position is firmly secured with gripper rollers for accurate and consistent register. Servo motor driven gripper rollers ensure the die cut position without effecting processing speed. The optional alignment detection sensor ADS-N4055 detects the alignment error for additional quality control. DIE CUTTING SECTION: Rigid magnetic upper roller and solid lower anvil cylinder ensure high quality die cutting. Uniquely designed die cutting section enables easy and quick die setting. Specification: Sheet Size (Before processing): Max. W400 x L550 mm or W15.740" x L21.650" Min. W200 x L275 mm or W7.875” x L10.830” Processed Material: Normal paper, Coated paper, Cardboard Material Thickness: 127.9 to 400 gsm Die Cutting: Max. 0.5 mm or 0.019” (In case of blade height: 0.8 mm or 0.031”) Max. 0.3 mm or 0.011” (In case of blade height: 0.6 mm or 0.023”) Creasing: Max. 0.4 mm or 0.015” (In case of blade height: 0.8 mm or 0.031”)

Condition: used, Year of construction: 1967, Year of Manufacture: 1967 Machine / Serial No.: 72882 Country of Manufacture: Germany Manufacturer: Praehomawerk Kehren & Co., Hennef/Sieg Model: RW 6 Machine type: Rotary table surface grinding machine Hjdjzvfi Hjpfx Airjnt Grinding method: Surface grinding with rotary table Grinding spindle arrangement: Horizontal spindle Control: Conventional / manual Rotary table diameter: 600 mm Magnetic chuck: Electromagnetic rotary table Grinding height: approx. 350 mm Maximum workpiece diameter: approx. 650 mm Grinding wheel diameter: approx. 400 mm Grinding spindle speed: up to approx. 3,000 rpm Grinding spindle motor power: approx. 5.5–7.5 kW Vertical adjustment: Manual / powered vertical adjustment Table rotation: Powered rotary table Coolant system: Included Grinding wheel dressing: Manual dressing arrangement Machine operation: Conventional push-button control Operating hours shown: approx. 11,350 h Machine length: approx. 2,500–3,000 mm Machine width: approx. 2,000–2,300 mm Machine height: approx. 2,700–3,000 mm Machine weight: approx. 3,500 kg

Condition: like new (used), For sale is a pneumatic rotary distributor / rotary feedthrough with the article number DVR 125I8. Connection flange according to EN ISO 9409-1: TK 125 Flow rate per transfer channel: 270 [l/min] Electrical power transmission: 12-pole Maximum voltage: 250 [V] Maximum current: 6 [A] Pneumatic power transmission: 8 [number] This item comes from stock / spare parts inventory. The optical condition can be seen in the attached pictures. Hsdpfx Aezx Ag Uoirsnt We will gladly provide further technical documents or detailed images upon request. Inspection and collection are possible by arrangement. Shipping is possible at the buyer's expense. Subject to prior sale, errors and changes.