Used Roughness Gauge Tester for sale (2,665)

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Csdsya Iaqepfx Apberh Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: used, Year of construction: 2010, No. 3214 Feed-through veneer press Sergiani LAS Plus Used, year of construction 2010, already dismantled and stored Automatic press with continuous operation for the production of barrier doors, finished doors (veneer doors, HPL, CPL) and pre-treated parquet (2 - 3 layers). The press can be used to load the workpieces one after the other, while the pressure in the other compartments is kept constant. Up to 2 employees are required to operate the line. The multi-daylight press enables a very high production output. The pressing time is approx. 3 minutes (180 seconds) and is spread over 10 levels, which means that the press opens every 18 seconds and a new panel is processed. The press has already been dismantled and stored. The system was in operation until it was dismantled. The previous owner produced 3-layer parquet with the system. The bottom layer was inserted manually. The middle layer consists of one piece. This was glued at the top and bottom and automatically inserted into the system. The top layer was also inserted automatically. Glue spreader / glue applicator not included (optionally available) Stages: 10 Pressing force: approx. 5.5 kg/cm² Total force: 200 tons Panel size: approx. 2500 x 1300 mm LW Heating: Hot water Area of application: Production of doors, laminating, veneer and wood-based material processing High productivity with a capacity of up to 1200 doors per shift (factory specification) Vacuum loading system with 2-lane infeed roller conveyor, without gluing Scissor lift table with loading belt (belt approx. 2900 x 1000 mm LW) Vacuum stacking station with outfeed roller conveyor Space requirement for press with loading table approx. 6500 x 2365 mm LW Space requirement for entire production line approx. 25000 x 5710 mm LW Credjv Sthgspfx Apbjh Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without transportation and assembly Loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), 50 hp model for between 3000-5000 kg per hour. In lovely condition. Photos show machine before it has been cleaned. Credpfx Aeyw A Hnspboh

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total height: 6,500 mm, 1x Pallet flow rack by Bito, fully functional. Capacity for 96 pallet positions. Year of manufacture: 2021. Basic dimensions: W 10.20 m - D 5.20 m - H 6.50 m. Pallet weight min: 250 kg, max: 1000 kg. Channel width / beam length: 2400 mm. The floor-level roller tracks are foldable for flexible cleaning access underneath (see picture no. 4). Inspected and serviced annually. The system is already dismantled and in storage. Crjdpfow Az Emex Apboh Europe-wide shipping available for an extra charge.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 19823 i 19251, input frequency: 50 Hz, input current: 116 A, working width: 3,100 mm, total width: 6,617 mm, total length: 6,900 mm, total height: 2,550 mm, overall weight: 11,000 kg, input voltage: 380 V, workpiece length (max.): 1,000 mm, workpiece width (max.): 3,100 mm, workpiece height (max.): 60 mm, type of input current: three-phase, actuation type: electric, Equipment: CE marking, documentation/manual, TECHNO KERNEL FD I SD – a line of 2 through-feed drilling machines. Each machine has 6 upper and 6 lower drilling heads, with 2 independent motor units for each. On each unit, it is possible to install an assembly with 11 vertical spindles, arranged either along the X-axis or the Y-axis with a 32 mm spacing, or assemblies for dedicated machining operations. The first machine also has two horizontal drilling units, each consisting of 2 independent assemblies equipped with 11 spindles with a 32 mm spacing. Crodpfx Aezyrpnepbeh In the second machine, instead of the horizontal spindles, there are 4 glue and dowel insertion units installed on each side. It is possible to load the components manually, or to connect the machine to automated loading and unloading systems for operation in a production line.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, feed rate X-axis: 95 m/min, plate height: 60 mm, plate length: 900 mm, plate width: 3,000 mm, production capacity: 1,500 unit/h, TECHNICAL DETAILS Minimum panel width: 250 mm Maximum panel width: 3,000 mm Minimum panel length: 100 mm Maximum panel length: 900 mm Minimum panel thickness: 12 mm Maximum panel thickness: 60 mm Maximum panel weight: 50 kg Working height: 1,060 mm Panel conveyor speed with inverter: 20 - 95 m/min Speed for panels over 50 kg: 50 m/min MACHINE DETAILS Control model: TPA - Albatros - CNC 2000 Crsdjyzn Sdspfx Apbjh EQUIPMENT EASYTOOL software 5 split lower vertical drilling heads, automatically adjustable with NC control, each with 26 independent spindles 2 horizontal drilling heads with split heads, 28 + 28 spindles (per side), independently arranged on two levels External reference: MMA004.003

Condition: used, Year of construction: 2013, machine/vehicle number: A1 /000149, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 13,600 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,600 mm, workpiece length (max.): 13,600 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 300 mm, workpiece weight (max.): 2,600 kg, number of axes: 8, number of slots in tool magazine: 11, controller manufacturer: osai, actuation type: electric, total height: 3,500 mm, total length: 31,000 mm, total width: 6,500 mm, overall weight: 18,000 kg, table length: 13,600 mm, table width: 1,250 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Cutting center for glulam beams, solid wood beams, and X-lam panels with a width of 1250. Machine equipped with software for converting files into BTL language. Designation: FORA CNC Milling Machine Brand: SCM ROUTECH Model: OIKOS 12 Type: OIKOS12 HT Serial number: A1/000149 Year of manufacture: 2013 Weight: 18000 kg Rated voltage: 400 V Number of phases: 3 Rated current: 63 A Frequency: 50 Hz Reference: 3-577 Crsdpfjz Hcp Aox Apbjh If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2007, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 415 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, We offer this used WEEKE OPTIMAT BHX 500 throughfeed machining center, year of construction 2007. The Homag Weeke Optimat BHX 500 is a compact CNC Horizontal drilling centre designed for high-precision processing of furniture panels, cabinet parts, and joinery components. Its horizontal machining design allows efficient processing with minimal floor space while maintaining high production speed and accuracy. _____ Key Features • Horizontal CNC drilling centre for efficient panel processing • Large processing capability Codpfxsyr Utne Apbjrh • High-speed axis movement for fast production cycles • Integrated clamping system for precise panel positioning • Designed for drilling, routing, and grooving operations • Built by HOMAG / Weeke, a leading manufacturer of CNC woodworking machinery _____ Axis Speeds • X axis speed: up to 138 m/min • Y axis speed: up to 80 m/min • Z axis speed: up to 50 m/min • Pressure plate axis: 27 m/min _____ Workpiece Dimensions • Length: Min 300 max 2500mm • Width: Min 100 max 1000mm • Thickness: Min 4 max 80mm _____ Machine Dimensions • Length: approx. 6500 mm • Width: approx. 2300 mm • Height: approx. 2700 mm _____ Electrical Requirements • Operating voltage: 3 × 415 V ±5% • Frequency: 50 Hz • Total connected load: approx. 19.5 kW • Recommended fuse protection: 50 A _____ Pneumatic Requirements • Compressed air pressure: minimum 7 bar • Air consumption: approx. 2500 NL/min _____ Dust Extraction • Dust extraction connection: 2 × 280 mm ports • Airflow requirement: minimum 4450 m³/h • Vacuum pressure: approx. 3000 Pa _____ If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), 1 milling unit 8 vertical drills 6 side drills Cjdpfx Apoy Ukzzsbsrh 1 saw 12 kW Year of manufacture: 2011

Condition: used, functionality: fully functional, -WAG 917- Offered here is a trough-type shot blasting machine from the manufacturer Wheelabrator, model T85. The machine is used and fully functional. Manufacturer: Wheelabrator Cjdjzktvqopfx Apbjrh Model: T85 Machine number: 6610246 Overall width: approx. 2300 mm Conveyor belt width: approx. 750 mm Overall height: approx. 3250 mm Overall depth: approx. 2100 mm Year of manufacture: 1996 The machine is dismantled and cannot be tested under power on-site.

Condition: good (used), Year of construction: 2021, machine/vehicle number: H 21-3743, Offer 26175 Technical data: - max. pressing force up to 25 t - max. ram stroke 160 mm - installation height without straightening unit 675 mm - overhang to the center of the ram 250 mm - table size approx. 1300 x 300 mm - working speed, roughing approx. up to max. 30 mm/s - working speed, finishing approx. 100 mm/s - oil capacity approx. 150 liters - drive 400 V / 10 kW - space requirement approx. W 4900 x H 2400 x D 1500 mm - weight approx. 3000 kg - including: - straightening table extension 2030 + 1520 mm Cjdpszh Edbsfx Apborh - traversing carriage with mounts on the straightening table - pointed die holder - roller die holder - straightening ram - pivoting feeler gauge with dial indicator

Year of construction: 2019, condition: excellent (used), functionality: fully functional, TOMRA SORTING | Vibrating channel feeder Manufacturer: Tomra Sorting s.r.o. Model / Type: Vibrating channel Serial number: 1144-041091 Year of manufacture: 2019 Cedozczugspfx Apborh Power: 2 kW Drive system: Power Grid s.r.o. Type: PG Shaker Drive Drive serial number: PG 1818-0683 Tested: 02/05/2018 Working channel dimensions: 2900 x 1950 mm Dimensions: 3000 x 2050 x 1750 mm Professional, large-scale vibrating channel feeder (commonly known as a vibratory channel) from the renowned, global leader in sorting systems and process automation – TOMRA Sorting. The device is designed for demanding tasks such as close-range transport, linear dosing, preliminary separation, and uniform distribution and feeding of a wide stream of raw material to subsequent process sections (such as optical laser sorters, X-RAY inspection systems, slicers, or IQF freezing tunnels). The machine's construction is based on a massive stainless steel / acid-resistant channel with an impressive working width of 1950 mm and a length of 2900 mm. The feeder's operation is based on inertial vibration technology, generated by a specialized, energy-efficient Power Grid Shaker Drive system with a power of 2 kW. The vibratory motion ensures that the raw material moves smoothly and inertially across the channel surface.

Condition: excellent (used), functionality: fully functional, Throughfeed band saw for cutting side pieces. Equipped with 6 chain strands with feed dogs. Feed length approx. 1,700 mm. 10 length stops. Saw motor 4.4 kW. Chain spacing: 750 - 600 - 1000 - 1000 - 1000 mm. Cedpoy T E T Njfx Apborh

Condition: used, Year of construction: 2009, machine/vehicle number: A0908/7866, working width: 250 mm, KOCH SBD-B Saw-Mill-Drill - Pass-Through Machine The machine has the following functions - loading magazine - 2 units with a formatting saw diameter 400/30 mm - 4 milling units with oscillation 4KW 18,000 rpm adjustable pneumatic oscillation - 2 horizontal drilling supports head 7 spindles (2 in the 32 mm module, 5 in the 16 mm module) - 3 vertical drilling supports head 14 spindles (12 in the 32 mm module + 2 extreme angular in the 32 mm module - 3 horizontal drilling supports Y axis 2 heads 16 spindles (14 spindles in the 32 mm module + 2 angular in the 32 mm module + 1 head 8 spindle (7 in the 32 mm module + 1 middle angle 32 mm - Return belt to the operator Crodpfjwd Rlfsx Apbsh - Supports for long elements The machine does not have doweling units Dimensions of processed elements L- 350-2500 W- 30-200 Gr- 15-75 Machine configured for processing table elements, sample elements in the attachment

Condition: new, Year of construction: 2025, Through-feed optimizing saw controlled by numeric control and personal computer for the optimization of the wood and the elimination of the defects. Cedpfxefhgz Is Apborh COSTCUTTING OPTIMIZING SAW Supercut 300 is an extremely fast optimizer able to revolutionize your firm's production system. Really Fast: an exclusive dual workpiece feed system combined with an ultra-rapid cutting unit make Supercut 300 unique. EXTREMELY ROBUST Very robust and reinforced steel structure. The in-feed belt conveyor is synchronized and managed by the same motor of the advancing rollers. Exclusive system with a double and solid top and bottom traction. Top advancing group with three hardened drive rollers with teeth and 6 idle pressing wheels (3 couples). Rising and descending of each toothed roller managed by numeric control. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a computer connected in real time to a last generation numeric control. Software running on Windows. Complete with 5 qualities managing. 22” LED colour screen. Tele-service trough internet. + Macro Excel included. FAST Fast and full optimization maintaining a notable compactness of the machine Feeding system with Brushless servo driven 18 Nm motor. Power motor blade HP=7,5. Eight idle rollers under the belt of the in-feed conveyor. RELIABLE AND SAFE Double steel marking platform. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Internal lighting.

Condition: used, Year of construction: 2013, Alberti Vector B/CN is a vertical coordinate borer designed for precise drilling and machining of flat materials. The machine features continuous workpiece feed with automatic loading and positioning along the axis. Thanks to its monolithic steel construction and four-axis control, it offers high rigidity, stability, and accuracy even under demanding operating conditions. Optimized work cycles enable efficient drilling, milling, and handling of the workpiece. The combination of multiple spindles, independent vertical units, and the option to use a saw makes this machine a versatile solution for the furniture and woodworking industries. Technical Data Max. workpiece dimensions: 3200 × 1200 mm Min. workpiece dimensions: 300 × 130 mm Processable thickness: 10–60 mm Max. programmable speed (X/Y/Z): 100 / 45 / 12 m/min Axis positioning tolerance: ± 0.1 mm Spindle motors: 2 × 1.5 kW Spindle speed: 3800 rpm Independent vertical spindles: 30 units, 32 mm pitch Saw motor (Ø 125 mm): 1.33 kW Saw inverter: 7.5 kW – 1000 ÷ 18000 rpm Crjdpexgfg Tsfx Apbsh Electrospindle motor: 6.7 kW Electrospindle speed: 9000 ÷ 18000 rpm Max. tool diameter: 60 mm Max. required power: 10 kW Operating pressure: 6–7 bar Air consumption: 100 Nl/min Exhaust air speed: 30 m/s Chip extraction capacity: 5000 m³/h Total machine weight: 3500 kg Central unit weight: 350 kg Dimensions (L × W × H): 5600 × 2110 × 2200 mm

Condition: used, Safeline Mettler Toledo throughput metal detector Diameter 175 mm Various diameters in stock See our other listings Crjdpfox Nym Nox Apbjh VMA Wekerom

Condition: used, Safe line Mettler Toledo drop-through metal detector Diameter 185 mm Various diameters in stock See our other listings Codpjx Nynmjfx Apbjrh VMA Wekerom

Condition: good (used), functionality: fully functional, power: 2.8 kW (3.81 HP), Type: FR1750/800 Screening/working area: 800 x 2,150 mm Driven by 2 x 1.4 kW unbalance motors Csdpfx Apexrndroberh on stable steel construction

Condition: ready for operation (used), The item offered in my auction is a conveyor belt with a length of 2.15 m. I also have lengths of 2.7 m, 3 m, and 4 m available. The belt width is 0.45 m. The price is for the conveyor belt with a length of 2.15 m. Possibility of transport. Crsdpfx Apeq Tqn Hoboh

Condition: new, Year of construction: 2026, The composition of the cabinet handling systems to create a manual, semi- or fully-automatic cabinet assembly line is depending on individual production requirements. Crsdpfx Aodx R D Djpboh Cabinet assembly lines that will make work easier, reduce set-up time and increase precision, we will explain to you in a personal conversation.

Condition: new, Year of construction: 2024, Linishing machine for flat parts or rectangular tubes. Working capacity (mm) 120x120 Abrasive belt speed (m/s) 20 Abrasive belts (mm) 120x1850 Conveyor belt speed (m/min) 12 or 6+12 Abrasive belt motor (kW) 3 Consumption (A) 7 Dimensions approx. (mm) 975x880x1800 Credpfx Aeg R Sxvopbsh Weight approx. (kg) 350

Condition: good (used), Price plus VAT. This package includes: 1 x Tegometall push-through safety bar, 2,700 mm Credpsg S Uxmofx Apbeh Manufacturer: Tegometall Condition: used, good condition Length: 2,700 mm Color: yellow Mounting: for hanging

Condition: not inspected (used), 3m x 1000mm thermal oil fryer, direct from closed snack food factory where it was frying samosas and onion bhaajis. Complete with top hold down belt and teflon infeed. Machine was removed from the factory when it closed in 2015 and has been in storage ever since. Codpfx Apjh Uhamjbsrh

Condition: new, - incl. sideward drain - total volume of bowl 53 l - working volume of bowl 40 l - dimension approx. 790 x 415 x 670 mm (h) - dim. of working trough approx. 590 x 290 x 290 mm (h) - motor 0,55 kW - engine (rpm) 1500 - bottom P.U. layer of the trough 10 mm - side wall P.U. layer of the trough 8 mm - weight 80 kg - incl. dosing pump - incl. controlbox (speed control included, 1000 – 1500 rpm) Crjdpfxed I Dn Ne Apbjh