Used S+S Varisort Cn 1000 for sale (73,246)

Condition: used, Year of construction: 2022, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2022 Control : Heidenhain TNC 640 Speed : 10000 rpm Movement X/Y/Z : 1000/600/600 mm Tool holder : SK40 Spindle: Technology:Belt drive Speed:10,000 rpm Tool holder:SK40 Media feed-through:Blown air + cooling lubricant Working table: Clamping surface:1,200 x 600 mm Tableloading (max.):750 kg General: Tool magazine:40 stations Features/Accessories: Coolant Management:IKZ system with filter and high pressure, 20 bar Redpfxezhzare Adcsw Chip Management:Chip conveyor Workpiece Measurement:25.50-HDR Tool Measurement:Pick UP wireless 35.40 TS Position Measurement System:Heidenhain linear measurement system (direct) X/Y/Z Setup Mode:Electronic handwheel

Condition: used, Year of construction: 1988, turning speed range 0 - 1.500 U/min curb weight 240 kg engine output 1,7 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. The offer consists of: 1x Vibratory finishing system, CN 150, year of manufacture 1988 1x Trowalpur wastewater treatment system RT 02-SK, year of manufacture 1997 Accessories, tools, and work-holding devices shown are included in the scope of delivery Redpfx Adjzczh Hjcsw only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: new, Year of construction: 2022, Belt width: 150 mm Belt length: 2740 mm Veneer sanding attachment: no Oscillation: yes Roller diameter: 115 mm Sanding unit swivels: yes / 90° - 0° Work table: 900 x 305 mm Auxiliary table: 290 x 260 mm Belt speed: 16 m/s Dust extraction connection: 100 mm Motor power: 3 kW / 400V Machine length: 1540 mm Rsdpshq A H Defx Adcsw Machine width: 750 mm Weight: 220 kg

Condition: excellent (used), Liebisch SKBWF 1000 A-TR Corrosion Test Unit Manufacturer: Gebr. Liebisch GmbH & Co. KG Type: SKBWF 1000 A-TR Corrosion test unit / salt spray chamber for salt spray, condensation, and combined tests. Technical Data Test chamber volume: approx. 1000 liters External dimensions: approx. 2600 x 1120 x 1210 mm Internal dimensions: approx. 1535/1425 x 800/780 x 660/650 mm Max. test specimen load: 10 kg per level Voltage: 400 V Frequency: 50 - 60 Hz Phases: 3~ Rated current: 12 A Power data according to nameplate: S Watts: 2800 W K Watts: 2150 W B Watts: 500 W W Watts: 1700 W Test solution reservoir: approx. 150 liters Distilled water consumption for humidifier: approx. 80 - 120 ml/h Test solution consumption: approx. 0.7 - 1.0 l/h Water filling for bottom trough system: approx. 15 liters Test procedures DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B 368 MIL STD 202 F-101D VW PV 1210 Equipment Automatic control Touch panel / operating panel GFK test chamber Test specimen grids Test specimen holders Connections for temperature, humidity, compressed air, and test solution NaCl test solution supply Deionized water supply Condition Used unit from industrial application. Optical condition as shown in the pictures. Inspection possible by appointment. Scope of delivery: (See picture) Shipping or freight forwarding possible. Rjdszba N Topfx Adcjw Subject to changes, errors, and prior sale. We will gladly answer any further questions by phone.

Condition: used, Year of construction: 2017, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2017 Control : Siemens 840 Dsl Grinding length : 1000 mm In General: Year of manufacture:2017 Control system:Siemens 840 Dsl Centre height:180 mm Centre distance:1,000 mm Maximum workpiece weight:150 kg X-Axis: Technology:Electromechanical Transverse speed:0.001 – 8,000 mm/min Measuring system:Direct, 0.0005 mm (glass scale) Guideway:Hydrostatic Z-Axis: Technology:Electromechanical Table speed:0.01 – 12,000 mm/min Measuring system:Direct, 0.0005 mm (glass scale) B-Axis: Technology:Continuously swivelling axis Resolution:0.001° Clamping:Hydropneumatic Rsdpfezhdybjx Adcjw Workpiece spindle: Power:2.0 kW Speed:0–600 rpm Chuck:MK 5 and KK 5 C-axis:0.001° Grinding spindle: Disc configuration:left/right Power:9 kW Speed:1,400 rpm Internal grinding spindle: Power:2.2 kW Speed:60,000 rpm Tail stock: Quill stroke:40 mm Mounting:MK 4 Quill retraction:Hydraulic Cylinder fine adjustment:Yes Equipment: Coolant supply:Coolant system with filter Emulsion mist separator:Mechanical Grinding wheel dresser:Diamond dressing tile Technology option I:Cone grinding Technology option II:Out-of-round grinding Balancing system:Automatic Grinding detection:Via structure-borne sound Workpiece measurement:Linear encoder Accessories:Various flanges, discs and mandrels

Condition: used, Year of construction: 2022, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Rsdjzg Shqspfx Adcow Description: Year of manuf. : 2022 Control : Heidenhain TNC 640 Speed : 10000 rpm Movement X/Y/Z : 1000/600/600 mm Tool holder : SK40 Spindle: Technology:Belt drive Speed:10,000 rpm Tool holder:SK40 Media feed-through:Blown air + cooling lubricant Working table: Clamping surface:1,200 x 600 mm Tableloading (max.):750 kg General: Tool magazine:40 stations Features/Accessories: Coolant Management:IKZ system with filter and high pressure, 20 bar Chip Management:Chip conveyor Workpiece Measurement:25.50-HDR Tool Measurement:Pick UP wireless 35.40 TS Position Measurement System:Heidenhain linear measurement system (direct) X/Y/Z Setup Mode:Electronic handwheel

Year of construction: 2025, condition: like new (used), functionality: fully functional, total length: 400 mm, total width: 1,000 mm, total height: 600 mm, machine/vehicle number: 2025, Wall cabinet HS 1000 with sliding door Top used unit, cleaned Dimensions: 1000 x 400 x 600 mm, WxDxH with intermediate shelf Rodpoy Ac T Sofx Adcjw

Condition: used, Multiple knife mill / granulator with rotor with 16 knives Rjdpfx Adszddlwecow 6 stator knives Drive 90 kW With equipment

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Condition: factory-reconditioned by Osama Technologies Equipment and technical data: - Automatic gluing machine with two rollers - Working width 1000 mm - Usable working thickness 0-100 mm - Application roller diameter 185 mm - Feed speed 24 m/min Rjdpowkbb Dsfx Adcsw - Height of the working surface 800 mm - Roller groove spacing 2 mm - Motor power 0.37 kW - Glue distribution container made of painted sheet metal - Water tank made of galvanized sheet metal - CE marking - Voltage 400/50/3Ph Availability: short-term Location: Röllbach

Condition: new, Year of construction: 2026, Are you looking for a professional storage solution for industry, commerce, agriculture, PV systems, or emergency power supply? With the APS 2000 kWh - 4000 kWh battery storage system, Albari Power Systems GmbH offers a high-quality and scalable energy storage system for demanding applications. Technical data * Storage capacity: 3 MWh or 4 MWh per container * AC power: 1.5 MW or 2 MW * Lithium iron phosphate technology (LFP) * High-quality cell, cell module, and BMS technology based on CATL components * Integrated power electronics for industrial and utility applications * Liquid cooling system for continuous operation * Integrated protection and safety systems * Grid-parallel operation, island operation, and hybrid operation possible * Expandable to storage parks with several MWh, up to the double-digit MWh range Typical applications * Self-consumption optimization * Peak shaving * Electricity cost reduction * PV surplus storage * Grid stabilization * Load shifting * Curtailment reduction * Feed-in optimization * Black start capable energy systems * Emergency and backup power supply * Hybrid solutions with PV, BESS, and generators Optionally available * APS Energy Management System (EMS) Rjdpfx Adogu Rukocsw * Grid-parallel operation * Island operation * Black start concepts * Integration of PV systems * Integration of diesel generators * Integration of CHP systems * Energy flow optimization * Remote monitoring and energy management * Multi-container systems with several MWh total capacity Your advantages ✓ High safety thanks to LFP cell technology ✓ High-quality CATL technology for cells, cell modules, and BMS ✓ Very high cycle life (≥ 8,000 cycles) ✓ German EMS with high safety standards ✓ German system design by Albari Power Systems ✓ German system integration by Albari Power Systems ✓ Multi-level safety and fire protection concept ✓ Grid-parallel, island, and hybrid operation ✓ Scalable from a single container to a large storage park ✓ Individual project planning and commissioning ✓ Service and support Turn-key solutions from a single source Albari Power Systems supports you from the initial project idea to the final commissioning: * Project analysis and economic evaluation * Storage sizing * EMS configuration * Grid and protection concepts * Engineering * Commissioning * Service and maintenance Designed in Germany The APS large storage containers are designed and engineered in Germany. Architecture, safety concepts, EMS logic, and integration strategies are developed according to European standards and industrial quality standards. We would be happy to create an individual concept for your project. Albari Power Systems GmbH 21376 Salzhausen Price on request according to project configuration

Year of construction: 2008, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 346100, Machine SAR-1000-B-015 including accessories: ULT ASD 300 Ex extraction unit. The operating manual can be provided as a PDF. The machine is currently in the condition shown in the pictures. It can be placed on pallets for collection if required. The machine has been inspected by Schunk, who determined that the following spare parts are needed: - Z-axis - Bearings for Y1 and Y2 axes - Replacement of power cable, Hall sensor cable, and pneumatic hoses - X-axis brake - Extraction nozzle and extraction hose - Shuttle sensor (B4.3/E) - Tool holders (5 pieces) - Replacement of UPS - Hold-down brush - Bulb for signal lamp - Hold-down sealing ring, pneumatic cylinder, guide shaft and plain bearing bush, spindle retaining plate Rjdpfx Ajxwvrusdcow - External exhaust hose ULT - Table lift cylinder (?) According to Schunk, material requirements are approx. €16,000. As we are selling the machine as defective/in need of repair and have listed all known deficiencies, the item is sold under exclusion of any warranty or liability for material defects.

Condition: like new (used), Dissolver VMA Getzmann Dispermat CN 40 Power: 2.2 kW Speed range: 0-5500 rpm Dissolver disc: 125 mm Basket mill Torusmill TML5-MS-S10 Redpfx Aezddvpjdcjw Double-walled mixing container, 5 liters, polished stainless steel 1.4571 Complete documentation available Like new, in top condition!!!

Condition: new, Year of construction: 2025, Panel Saw ALTENDORF F 35 Type 1 - 1000 Top for Solid Wood - New machine - immediately available from stock Bitburg - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large safety hood Double roller carriage, 3,200 mm Scoring unit-ready Rip fence, cutting width 1,000 mm Angle/miter fence 3,450 mm, without length compensation Table extension/widening: Powder-coated surface Saw blade tilting range: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade diameter: 450 mm Display size: 15 inch Rodpfx Adoxyl Epecow Working table height: 910 mm Extraction port diameter: 80 + 120 mm Options included: M45102 Rip fence 1000 mm Digit_X Location: ex-stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2005, Marking and surface plate 1000 x 1000 with base frame Redpfswqx Axsx Adcsw Location: from stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Panel Saw ALTENDORF F 35 Type 3 - 1000 with Scorer 7.5 kW (10 HP), 3 speeds, Motorized height and tilt adjustment, Redsxyl Ecspfx Adcjw Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Angle/miter fence Digit-L, Table extension/table width extension, With proven CDF surface ----- Technical Data ----- Swivel range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 7.5 kW, Screen size: 15 inch, Working table height: 910 mm, Extraction connection Ø: 80 + 120 mm Equipment: Altendorf F 35 Type: III - 1000 7.5 kW (10 HP) 3 speeds (M51064) Angle/miter fence Digit L option (M44154) Location: Ex stock 54634 Bitburg - immediately available -

Condition: ready for operation (used), Year of construction: 2000, operating hours: 6,688 h, travel distance X-axis: 235 mm, travel distance Z-axis: 1,045 mm, overall weight: 2,160 kg, number of axes: 2, This MORI SEIKI SL 1000 was manufactured in 2000. It features a robust Kitagawa Power Chuck and extensive tool holders, making it suitable for various turning applications. With a machine weight of 2160 kg and a rated power of 23 kVA, it offers reliable performance. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL 1000 horizontal turning machine we have for sale. Contact us for further details. • Phase: 3 • Frequency: 50 Hz • Voltage: AC 200 V • Full Load Current: 67 A Rsdpfxozb Indj Adcow • Spindle Motor Current Rating: 64 A • Interrupting Capacity: 5 kA • Rated Power: 23 kVA • Machine Weight: 2160 kg • Control: MSG-803 (MAPPS) • Chuck: Kitagawa Power Chuck • Power On Time: 7267 h • Auto Machining Time: 6688 h • Extensive Tool Holders Included • Chip Conveyor: Optional, not included Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2015, The ECO IceFighter consists of a stainless steel frame, a tank made of special plastic, a dry-running and brine-resistant piston diaphragm pump with an ON/OFF switch and connectors, a proportional control valve to regulate the spray volume with 3 electrically switchable zone valves, a pressure gauge, a shut-off valve, a spray lance with 3 types of stainless steel nozzles, and the necessary filters to prevent the nozzles from clogging. - Spray bar SB8 - 3 zones - Spray width 3.0 m - Drive with hydraulic motor for oil flow up to 60 l/min - Refueling automation - when the maximum level is reached, the refueling process is automatically switched off (must be prepared during brine preparation - the signal comes from the brine preparation unit) with a standardized 4-pole connector - C-filling nozzle + overflow made of stainless steel (except for the C-coupling) - Overflow generously sized, including a shut-off valve for closing after the filling process. Redpfxogqz A Re Adcew Storage location: 54595 Prüm

Condition: used, Year of construction: 1975, workpiece diameter 8-125 mm grinding depth 130 mm clamping length 50-1100 mm max. workpiece diameter 0 mm min. workpiece diameter 0 mm workpiece length mm total power requirement 1 kW weight of the machine ca. 500 kg dimensions of the machine ca. m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 1000 Year approx. 1975 Serial No. J 1400 _____ Distance between centres 50 – 1,100 mm Height of centres 145 mm Workpiece Ø 8 – 125 mm Rjdpjt Hwuvefx Adcsw Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice 4 – 150 mm Stroke of grinding head 130 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø 15 – 60 mm Grinding spindle speeds 13,000 – 45,000 rpm Workpiece drive 0 rpm Total electrical load, approx. 0.5 kW - 380 V - 50 Hz Weight, approx. 500 kg Accessories / Special Features: * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. * The workpiece remains stationary, enabling the procuction of perfect centre holes. * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw chuck which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering tool with carbide inserts. Manual adjustment of appropriate workpiece diameter with a rachet coupling. * Manual dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form. * Pre-centering device for Workpiece only partially available. * Height-adjustable tailstock and bore in machine base allow longer workpieces. Condition : average to good/should be reconditioned. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: used, Year of construction: 1987, x-travel 400 mm y-travel 250 mm workpiece height 485 mm Control ELESTA CNC 314 total power requirement 10 kW weight of the machine ca. 4000 kg dimensions of the machine ca. m H A U S E R CNC - Controlled Vertical Precision Coordinate Grinding Machine Model S 3 – CNC 314 Year 1987 / 1998 partially reconditioned by Swiss-HTT # 0463 _____ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Rodpst Hw Txefx Adcow Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 7.500 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm 18 Spindle speeds, depending on spindle motor 4,500 – 80,000 rpm Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 10 kW - 380 V - 50 Hz Weight, approx. 4.000 kg Accessories / Special Features: * CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XYC) Interpolation with a free programming,the U-Axis is not interpolating it is just an infeed axis. There is also a handwheel controldevice for setting – up purposes. Digital Read-out for the Z-Axis W Axis for vertical positioning of grinding head, Z Axis as high speed stroke axis, also for blind-hole grinding and surface grinding. U Axis for the infeed cycles during bore grinding. C Axis Feed for the of the Planetary Head. * Alltogether 2 grinding turbines 22.500 to 80.000 rpm, with some collets * Built-on Acoustic Grinding Contact Display Device Model KSV 5. * Separate coolant unit with band filter. * Built-on fire extinguishing system. Separate switch and control cabinet. Covered working area. Separate hydraulic unit * Central lubrication, service tools. Condition : Very good - Machine can be inspected under power. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract

Condition: used, Year of construction: 1981, x-travel 650 mm y-travel 450 mm workpiece height 585 mm Control ADCOS CNC 400 total power requirement 15 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m H A U S E R (Switzerland) CNC Controlled Hi Precision Double Column Jig Grinder Model S 40 – CNC 311 / ADCOS 400 CNC Year 1981 / CNC modernized in 2008 # 0126 _____ Table size approx. 630 x 770 mm Table load capacity approx. 500 kg Table travel longitudinal max. (X) 650 mm Grinding head slide cross max. (Y) 450 mm Vertical adjustment of cross rail max. (W) 500 mm Grinding spindle stroke max. (Z) 140 mm Stroke number of grinding head (4cycles) 0,5-12 m/min. Vertical distance between Table/grinding spindle 0-585 mm Distance between columns 750 mm Conical grinding max. 16 ° Grinding-Ø bore approx. 230/360 mm 18 spindle speeds depending on spindle motor infinitely variable 4.500-80.000 rpm Fine feeds in X and Y-axis and W-axis 0,5-1.500/3.000/800 mm/min. Planetary speed (C) 5-250 rpm U-axis, radial feed 6 mm Total electrical load approx. 15 kW - 400 V – 50 cycles Weight approx. 4.500 kg Accessories/ Special Features: • CNC Pathcontrol replaced and modernized into a ADCOS Control Model CNC 400, (German Manufacturer) including large monitor and Redpfxjt Hw S Uo Adcow relevant software, electronic handwheel, for following axis: X=Table length, Y= spindlehead carriage cross, Z= Quill vertical/stroke, C=Quill-Rotation,U=Circular Infeed, w=Vertical adjustment of cross rail. • Z-axis as rapid stroke for shorter processing times, plunge-cut grinding, face grinding, Pre-selection of reversing stops (start movement + teach-in) and of stroke speed (infinitely variable), • U-axis as manual and controlled feed-axis radial, mounted on grinding head, with electr.display of feeding size 1 Grinding motor mounted on spindle, maybe up to a spindle speed of 30.000 rpm, • Mounted accustic grinding contact-display device KSV 5 • Separate standing coolant facility, switching- and control cabinet, separate hydraulic system, central lubrication system, dust suction, etc Condition : very good / can be inspected under power Delivery : ex stock – as inspected Payment : net – after completion of contract

Condition: used, Year of construction: 1990, x-travel 400 mm y-travel 250 mm workpiece height mm Control CNC 314 ELESTA total power requirement 15 kW weight of the machine ca. 5500 kg dimensions of the machine ca. m H A U S E R (Switzerland) CNC - Controlled High Precision Jig Grinding Machine Model S 3 – CNC 314 Year approx.. 1990 S/N 32086 _____ Table size, approx. 600 x 380 mm Max. load on table, approx. 300 kg Table travel, longitudinal, max. (X Axis) 400 mm Table travel, cross, max. (Y Axis) 250 mm Vertical adjustment of grinding head max. (W Axis) 450 mm Stroke of grinding spindle, max. (Z Axis) 120 mm Table Longitudinal and cross feeds (X/Y-Axis) 0 – 1.500 mm/min Speed of grinding head stroke 15 – 12.000 mm/min Vertical distance between table and grinding spindle, max. 0 – 485 mm Distance between grinding spindle and column 350 mm Rsdpfet Hxcnox Adcow Conical grinding, up to max. 16 ° Grinding Ø bore approx. 230 mm Planetary speeds (C-Axis) 5 – 250 rpm U Axis, radial infeed 6 mm Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight/Total weight approx. 4.000/5.500 kg Accessories / Special Features: • CNC Continuous Path Control, Model CNC 314, (ELESTA-POLESTA II) with new monitor,for 4 axes (XYC+U) in 2 1/2 dimension (XY+C) Interpolation with a free and easy programming for Linear and circle interpolation. Direct Input of data on keyboard, also loading data on RS 232 connection. There is also a handwheel control device for setting – up purposes. Manual feed correction during the working cycle possible. • Digital Read-out for the Z-Axis, Z-Axis as high speed stroke, also good for blind holes. • W Axis for vertical positioning of grinding head slide, • U Axis for the infeed cycles during bore grinding, grinds different bore-Ø automatically. • C Axis Feed for the of the Planetary Head, grinds radii and contours • 2 grinding motors HAUSER approx.. 22.500 to 60.000 rpm, with some collets and arbors • Built-on Acoustic Grinding Contact Display Device Model KSV 5. • Separate coolant unit with band filter. * Built-on fire extinguishing system. • Separate switch cabinet and control unit, Separate hydraulic unit with oilchiller, • Central lubrication, service tools, collets and grinding arbors/tools. Condition : Very good - Machine can be inspected under power commissioned by a Specialist. Delivery : Ex stock - as inspected under power. Payment : Net, after conclusion of contract

Condition: used, Year of construction: 1983, table diameter 1000 mm workpiece height 25 mm number of wheels 1 Rsdpfx Aot Hw H Sjdcsw total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Year of construction: 1984, pressure 500 t Rodpfjt Hwpyjx Adcjw passage width 750 mm stroke 120 mm total power requirement 57 kW weight of the machine ca. 16 t dimensions of the machine ca. m

Condition: used, Year of construction: 2000, Complete Mini Dairy Line – Seital 05X Separator + Malldison 1,000 L/h Self‑Heated Pasteuriser + Fords Little Gem 6/2 Glass Pint Bottle Filler Ideal for: Small dairies, farm bottling, cream production, test plants and product development. Line is designed for approx. 1,000 L/h milk processing into glass pint bottles. 1) Seital 05X Cream Separator • Make/Model: Seital 05X disk‑stack centrifuge • Application: Milk clarification / cream separation • Typical capacity: up to approx. 1,000 L/h (depending on product and setup) • Construction: Stainless steel product contact parts Rodpey Rk T Aefx Adcjw • Features: • Designed for continuous operation in dairy service • Compact footprint – suitable for small plants/farm dairies • Complete with bowl, drive and base frame • Condition: Used, in good overall condition; available for inspection • Suitable for: Whole milk separation into cream and skim milk prior to pasteurisation or standardisation. 2) Malldison 1,000 L/h Self‑Heated Pasteuriser • Make: Malldison • Capacity: 1,000 L/h • Type: Self‑heated HTST plate pasteuriser – no separate external boiler required • Product: Cow’s milk (also suitable for similar liquid dairy products) • Key features: • Plate heat exchanger with regeneration, heating, holding and cooling sections • Self‑contained heating system (self‑heated) for convenient installation • Designed for standard dairy temperatures (e.g. 72–75°C for 15 seconds, depending on setup) • Includes balance tank, pumps and control panel (as pictured / supplied) • Condition: Used, previously in dairy service, offered as is / tested prior to dispatch (as agreed). 3) Fords “Little Gem” 6/2 Glass Pint Bottle Filler • Make/Model: Fords “Little Gem” • Type: 6/2 rotary filler for glass pint milk bottles • Configuration: • 6 filling heads, 2 capping stations (6/2) • Suitable for returnable glass pint bottles • Application: • Filling pasteurised milk into pints for local delivery / farm shop / retail • Compact machine ideal for small to medium‑scale bottling • Features: • Stainless steel contact parts • Adjustable for standard UK‑style glass pint bottles • Simple, robust design with easy operation and cleaning • Condition: Used, good working order when last in production; inspection and test run available by arrangement. Line Summary This package offers a complete small‑scale milk processing and bottling line: 1. Seital 05X – separation of cream and skim milk 2. Malldison 1,000 L/h self‑heated pasteuriser – HTST pasteurisation without external boiler 3. Fords Little Gem 6/2 – rotary filling of glass pint bottles • Approximate throughput: up to 1,000 L/h (depending on product and operating conditions) • Ideal for: farm dairies, local milk brands, glass bottle milk delivery or artisan dairy operations. Additional Services (optional – include what you actually offer) • Loading and packing for transport • Assistance with installation/start‑up emote or on‑site by agreement • Export documentation if required

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 22428, total height: 4,000 mm, total width: 2,500 mm, total length: 13,000 mm, overall weight: 11,000 kg, rotor diameter: 600 mm, rotor width: 1,000 mm, type of input current: AC, opening width: 1,000 mm, rotor length: 1,000 mm, sieve perforation: 8 mm, power: 150 kW (203.94 HP), Herbold SM 600/1000 - S7-2 Recycling Plant, complete – Year of manufacture 1999 – Ready for immediate use For sale is a fully equipped and operational recycling plant based on a Herbold SM 60/100 shredder, manufactured in 1999. This is a complete production line, from the feed hopper to the filled end product. The plant is ready for operation, runs reliably, and can be demonstrated in operation after prior arrangement. The plant is mounted on a semi-trailer and can be used flexibly at different locations. The integrated 340 kVA generator enables autonomous operation. Rodpfxezfxqvs Adcsw The plant was specifically designed for the processing of plastic materials and features an enlarged material inlet, which is particularly suitable for feeding in crates and large-volume plastic parts. For export or stationary installation, the plant can be disassembled after prior arrangement. Preparation for container or sea transport is possible. Equipment: Herbold SM 60/100 shredder Year of manufacture 1999 Generator 340 kVA Conveyor system Filling system Dust extraction system Demetallization / metal separator Complete plant, ready for immediate use Condition: Functional and in regular use Good technical condition Extensive spare parts stock included Several spare conveyor belts Conveyor fan Spare motors Set of spare blades Deflector wedge Other wear and spare parts Immediately available upon agreement Advantages: Complete line from a single source Autonomous operation possible through generator Suitable for recycling companies, plastic processors and export If you are interested, please contact us by phone or message. Inspection and demonstration are possible after prior arrangement.