Used Scm Tech Z 25 for sale (36,710)

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. Lrsdpfx Adog Ewwrotjk -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: excellent (used), Flexible N.C. line for drilling, routing and "hardware" insertion. Ledpfx Adshvagkstork Numerical Control "TPA" Albatros. Composed by: 1) Hedgehog loader, with 12 positions (for 12 panels), vertical panel introduction. 2) CNC Drilling and routering machine Mod. Over 25.13 with inserter (for bushes, shelf support and base). - N. 1 operating head (estimated KW 5,5) with tool storing revolver (10 positions) - N. 1 boring head with 24 independent spindles (X axis) - N. 1 boring head with 2 independent spindles (Y axis) - N. 1 boring head with 5 independent spindles (Z axis) - N. 1 insertion unit (bushing screwing) - N. 1 insertion unit (shelf support pressure) - N. 1 storage and feeding tank 3) Unloader (90° side-deplacement), with motorized conveyor for vertical outfeed of the panel. 4) Unloader - tilting (0°-90) moves the panel from vertical to horizontal, with motorized conveyor

Condition: used, Year of construction: 2023, functionality: fully functional, For Sale: OTT Unimatic 25.8F Edgebander with Ligmatech ZHR 15 Return System Ledpfxeygl A Ao Adtjrk We are selling an OTT Unimatic 25.8F edgebanding machine combined with a Ligmatech ZHR 15 return conveyor table. The units are sold exclusively as a complete set (line). Key Features and Customizations: Custom Grooving Units: The machine has been upgraded with two additional milling units—one for lateral grooving from the front and one for vertical grooving from the top. It was primarily used for the production of interior door frames. Stability Upgrades: Custom-built stabilization rollers have been added to the interior side to ensure precision when processing narrow workpieces. Recent Maintenance: Last year, the glue application unit (including the roller) was completely replaced with a new one. The track pads (shoes) were also replaced. Condition and Dimensions: Condition: The machine is rarely used but has been regularly maintained and serviced by TIBO. It is currently in full working order and available for testing on-site. Dimensions: Total line length is 11m, width is 2m. Serious inquiries only, please.

Condition: new, Year of construction: 2010, functionality: fully functional, space requirement width: 2,700 mm, space requirement length: 3,500 mm, space requirement height: 2,600 mm, overall weight: 5,200 kg, pressure: -1 bar, operating pressure: 6 bar, temperature: 200 °C, filter area: 2.5 m², operating temperature: 200 °C, Reference: C13598 316 stainless steel ATEX nozzle filter drier, 3V Tech 250 FPP/SD FM, with 2.5 m² of filtration surface. Unused equipment, designed for solid-liquid separation processes in the chemical and pharmaceutical industries. Material 316/316L stainless steel Technical specifications Model 250 FPP/SD FM Year of manufacture 2010 Body working pressure -1/+6 bar Body working temperature -25/+200 ºC Total body volume Lsdpfowpf Sqsx Adterk 3450 L Case/jacket working pressure -1/+10 bar Case/jacket working temperature -25/+200 ºC Case/jacket volume 80 + 20 L Equipment configuration ATEX Electrical panels Bag filter Hydraulic unit Centrifugal pump Transport information Length 3500 mm Width 2700 mm Height 2600 mm Weight 5200 kg Documentation CE certificate Certificate ATEX Maintenance Manual Operating Manual Drawings Electrical Diagrams Filtration Area Filtration Area 2.5 m² Condition Unused Manufactured by 3V TECH

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, planing width: 520 mm, tool diameter: 120 mm, number of blades: 4, actuation type: electric, total length of planing tables: 2,200 mm, total width: 1,040 mm, total height: 1,100 mm, overall weight: 1,050 kg, total length: 2,200 mm, working width: 520 mm, extraction nozzle diameter: 120 mm, height adjustment type: mechanical, jointer table length: 2,200 mm, number of planer blades: 4, planer shaft diameter: 1,200 mm, planing height: 240 mm, table length: 2,200 mm, working height: 240 mm, SCM 2252 Surface Planer/Thicknesser – Planer Thicknesser in PERFECT CONDITION!!! Italian-made machine! TECHNICAL SPECIFICATIONS: Thicknesser: - Max planing width: 520 mm - Max planing height: 240 mm - Cutterblock diameter: 120 mm - Number of knives: 4 TERSA - Feed speed: 6.5–17 m/min - 2 rollers in the table - Manual and mechanical adjustment of working height Surface planer: - Total table length: 2200 mm - Adjustable tables - Cutterblock silencing - Cutterblock guard - Extraction port: 150 mm - Tilting fence 0–45° - Fence length: 1070 mm - Power supply: 400 V - Motor: 5.5 kW Machine dimensions: - Length: 2200 mm - Width: 1040 mm - Height: 1100 mm - Weight: 1050 kg Where can you view our machines? JBS WOODWORKING MACHINERY Lredpfxoyft Hyo Adtjk WOLICA DRUGA 26 23-310 MODLIBORZYCE LUBELSKIE PROVINCE, POLAND Possibility to test the machine on site. Financing options available – leasing or installment payments. WE ORGANIZE TRANSPORT Tel: 664 335 465 Tel: 530 632 386 jbsmaszyny.pl

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2020, operating hours: 300 h, Price is for the machine from the demo center, including additional barrel and second build platform. - Construction space 250*250*250 - Scan speeds up to 12 m / s - Layer thicknesses from 0.05 mm - Accuracy of +/- 0.1% over part length - Granite return frame - Control of key operating parameters Ledpehvim Eefx Adtork - Pump fed replenishment capability - High performance vacuum overcoating system - Key components from Spectra-Physics, Advanced Optowave, SCANLAB and Panasonic. The machine has an open material platform - consumables from all manufacturers can be sourced and processed directly. Transport; commissioning and consumables are not included in the price. The local UnionTech partner takes over setup, training and service!

Condition: good (used), Year of construction: 1995, functionality: fully functional, SCM Combination Planer/Thicknesser 2252 Year of manufacture: 1995 Manufacturer: SCM (Italy) S/N AB 44714 good condition, from a training facility Planing & thickness width 500–520 mm Planing table length     ~2000–2200 mm Cutterhead Ø 120 mm, 4 knives (HSS/TERSA) Motor power     5.5 kW (400 V) Thicknessing height   3 – ~235 mm Feed speed 5 – 17 m/min Table adjustment  manual (planing), electric with display (thicknessing) Extraction connection   Ø 120 mm The SCM 2252 is a robust combination machine ideal for craft applications. Cast iron tables, HSS cutterhead, stepless feed, motor-driven thicknessing table adjustment with display and mortising attachment make it a versatile work tool. Easy table adjustment for changing to thickness planing (spring assist) Lredpfx Adowrcd Nstok Planer part (planing function) Working width: approx. 500–520 mm Table length: about 2000–2200 mm Cutterhead: d = approx. 120 mm with 4 HSS knives Power: 5.5 kW (~7.5 HP) motor, 400 V Start: conventional "YA" start with motor brake Alignment & guidance: tiltable parallel fence (0° to 45°), mostly aluminum, length approx. 1100 × 170 mm Protection: Extraction hood (Ø approx. 120 mm) and CPS operator protection Tables: Cast iron tables, height adjustable manually Thickness planer part Working width: same range – 500–520 mm Height range: min. 3 mm to max. approx. 235–252 mm Table dimensions: approx. 500 × 930 mm to 550 × 320 mm implemented Table adjustment: electric, with display (e.g., SIKO, digital height display) Feed speeds: continuously adjustable between ~ 5 and 17 m/min or in steps like 7.5 / 15 m/min Extraction: usually also Ø 120 mm, often combined extraction option Machine features & dimensions Dimensions (L×W×H): around 2200 × 1000–1500 × 800–1000 mm Working height: approx. 800 mm Weight: 1050 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Working area: 2700 x 1250 mm Z-axis travel: 160 mm Rotary axis: C-axis Spindle motor power: 8.5 kW Spindle speed: 24,000 rpm Tool changer (carousel): 8 tools (auxiliary magazine) Main tool magazine: 10 tools Saw unit along X and Y axes Vertical drills along X-axis: 8 pcs Vertical drills along Y-axis: 5 pcs Horizontal drills along X-axis: 4 pcs Horizontal drills along Y-axis: 4 pcs Tool holder type: HSK 63 Central lubrication pump Vacuum raster table Edge milling unit along X-axis Ljdowp R Eiopfx Adterk Year of manufacture: 2011

Condition: like new (used), cutting length 4.5 m maximum working height 60 mm maximum saw blade diameter 350 mm scorer pneumatic pressure beam main motor power 7.5 kW power supply 380 V Ledpfx Aowtygqedtsrk

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller length: 2,550 mm, sheet thickness (max.): 25 mm, STANDARD EQUIPMENT * Lower, upper, and side rolls are hydraulically actuated and move linearly up and down via body-mounted pistons * Protected against overload * Upper and side rolls are driven by hydromotors and planetary gearboxes (3-roller motor drive system) * Positions of the rolls can be easily read via three digital displays * The hydraulically opening head and automatically upward-moving shaft make it easy to remove the bent workpiece * Extremely easy operation with the mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone rolling system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) for support in large diameter rolling * Hydraulic side supports for large diameter rolling * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Rolling Length: 2550 mm Pre-bending: 16/20 mm Bending: 20-25 mm Upper & Lower Roll: 350 mm Side Roll: 260 mm Lrodpow Smb Refx Adtek Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1900 mm Height: 1950 mm Weight: 12,800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 280 mm, roller (top) diameter: 280 mm, side roll diameter: 220 mm, roller length: 2,550 mm, sheet thickness (max.): 16 mm, STANDARD EQUIPMENT * The upper, lower, and side rolls move linearly up and down via hydraulically actuated body-mounted pistons. * Protected against overload. * Upper and side rolls are driven by hydromotors and planetary gearboxes (all three rolls are motor-driven). * The positions of the rolls can be easily read through three digital display gauges. * The hydraulically opening head and automatic upward-lifting shaft allow easy removal of the bent workpiece. * Very user-friendly operation with a mobile control panel. * Welded steel construction body. * Rolls made from SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts. * Conical bending system. * Centralized lubrication system. * Hydraulic balancing system for parallel movement of the rolls (Ø280 - 320 - 350 - 380 - 400 - 460). * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680). * Dual-speed operating system. OPTIONAL EQUIPMENT * Automation with NC and CNC control consoles. * Upper crane (hoist) for support in large diameter rolling. * Hydraulic side supports for large diameter rolling. * Hydraulic plate ejector system. * Ground and polished rolls for special applications. * Infinitely variable speed adjustment system. * Electronic balancing system for parallel movement of the rolls (Ø280 - 320 - 350 - 380 - 400 - 460). TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Lsdpfxow Smfce Adtsrk Pre-bending: 10/12 mm Bending: 12/16 mm Upper & Lower Roll: 280 mm Side Roll: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1700 mm Height: 1850 mm Weight: 9650 kg

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 400 mm, roller (top) diameter: 400 mm, side roll diameter: 300 mm, working width: 2,550 mm, sheet thickness (max.): 40 mm, Equipment: documentation/manual, emergency stop, foot remote control, hardened rollers, STANDARD EQUIPMENT * Upper, lower, and side rolls are linearly moved up and down by hydraulically actuated pistons attached to the frame * Protected against overload * Upper roll and side rolls are driven by hydromotors and planetary reducers (3 roll motor drive) * The position of the rolls can be easily read with three digital indicators * The hydraulically opening head and the automatically lifting shaft allow the bent part to be removed easily * Very easy operation with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Conical bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operation system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) to support large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet removal system Lredjxw Ebxepfx Adtsk * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280-320-350-380-400-460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-Bending: 25/30 mm Bending: 30/40 mm Upper & Lower Roll Diameter: 400 mm Side Roll Diameter: 300 mm Motor Power: 38.5 kW Bending Speed: 1.5 – 5 m/min Length: 5350 mm Width: 2250 mm Height: 2350 mm Weight: 17,800 kg

Condition: used, machine/vehicle number: 008491, X axis working area: 2500 mm Y axis working area: 1300 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 0 Total number of tool changer positions: 24 Lsdpfeyxmvvox Adtsrk

Condition: used, Speed-Tech Equipment horizontal cardboard baler, bales are approx. 1200 lbs., 6' long x 36" wide x approx. 28" tall, 3 phase, in working condition, winning bidder responsible for proper removal. Ledpfjxd D Nzsx Adtjrk

Condition: used, machine/vehicle number: 007667, Max width workable: 1100 mm Lrodpju H R Hmofx Adtok Max length workable: 2500 mm Max height workable: 250 mm

Condition: used, Year of construction: 2018, operating hours: 1,919 h, machine/vehicle number: Z4525XCM-605, fuel type: diesel, Weights Empty weight: 6.822 kg Functional Mast: articulated arm Lifting capacity: 454 kg Working height: 1.600 cm Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Outrigger Max. horizontal reach: 755 m Transport dimensions (LxWxH): 6.65x2.29x2.25 Ledpfx Asy Dnxvsdterk Additional information Please contact PFEIFER GROUP for more information

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 4,171 h, load capacity: 2,500 kg, lifting height: 3,680 mm, fuel type: diesel, mast type: simplex, construction height: 2,480 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift truck Mast type: Standard Transmission: Automatic Condition: Refurbished without warranty Technical condition: Very good Front tyres type: Superelastic Front tyres condition: 60 - 80% Rear tyres type: Superelastic Rear tyres condition: 40 - 60% Ljdoy Dwfxspfx Adtjrk Description: Price includes new UVV (safety inspection), new paintwork, and air conditioning maintenance. We are happy to arrange cost-effective transport for you. Leasing with option to buy is generally possible! We are an official Jungheinrich partner. Sideshift, 3rd valve, rear work lights, front work lights, heating, road registration (StVZO), full cabin, air conditioning, CE certificate, Mini levers,

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder / Twin-Screw Kneader COLLIN ZK 25 For sale is a COLLIN ZK 25 twin-screw extruder in a compact laboratory or technical center design. The machine is ideal for trials, compounding, product development, as well as smaller-scale production applications. The extruder features a screw diameter of 2 x 25 mm with a process length of 36 D (6x6 D). Depending on the configuration, screw speeds of 460 / 600 / 800 min⁻¹ are possible. The drive power is 9.7 / 12.5 / 16 kW. The maximum melt pressure is 320 bar, and the maximum melt temperature is 400 °C. The machine is equipped with multiple heating zones. Barrel heating is 1 x 850 W plus 5 x 1200 W, and nozzle/adapter heating is 600 W. Water cooling is available, and temperature control is provided for zones 1 to 6, with water cooling connected via hose. Technical Data: • Manufacturer: COLLIN • Model: ZK 25 • Design: Twin-screw extruder / Twin-screw kneader • Screw diameter: 2 x 25 mm • Screw length: 36 D • Screw speed: 460 / 600 / 800 min⁻¹ • Max. melt pressure: 320 bar • Max. melt temperature: 400 °C • Weight: approx. 550 kg • Dimensions: • Length: approx. 2,100 mm • Width: approx. 600 mm • Height: approx. 1,900 mm • Screw center height: approx. 1,100 mm Electrical Data: • Connection: 3 x 400/230 V, 50/60 Hz • Power supply: L1 / L2 / L3 / N / PE • Fusing: 3 x 50 A • Max. connected load with downstream units: 30 kW Lredpfxsy A H Ume Adtjk Applications: Ideal for laboratory usage, technical centers, R&D, test series, compounding, and material testing.

Year of construction: 2010, condition: ready for operation (used), number of axes: 3, This 3-axis Mitutoyo Quick Scope QS-250 Z was manufactured in 2010, featuring a joystick box, various clamping lugs, and profile strips for versatile setup options. It includes MAG1 mounting and both short and long spring clips for precise optical measurement tasks. Consider the opportunity to buy this Mitutoyo Quick Scope QS-250 Z optical measurement machine. Contact us for further details regarding this machine. Additional equipment • Joystick box • Tailstock • Spring-loaded tailstock • Clamping lugs: 35–37, 39–41, 55–57 • Clamping profile strip with end-face connection • Clamping profile strip without end-face connection • Connector with connection slots • MAG1 mounting Ljdpfx Adox D D Abstork • Spring clip 15° (short) • Spring clip 15° (long) • Threaded clamping holder • 30 mm cylindrical pin • 40/10 mm guide comb with longitudinal groove only • 120° prism with spring clip • The maximum length measurement deviation in the XY plane is 2.5 + 0.006 µm • Measuring range (X/Y/Z): 200 x 250 x 100 mm • Resolution: 0.5 µm (0.0005 mm) • Accuracy XY: (2.5 + 0.006 µm) • Accuracy Z: (5 + 0.006 µm)

Condition: used, Year of construction: 2018, operating hours: 1,496 h, machine/vehicle number: Z4525XCM-464, fuel type: diesel, Weights Empty weight: 6.882 kg Functional Mast: articulated arm Lifting capacity: 454 kg Working height: 1.600 cm Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Outrigger Ledpfxjyzl E Uo Adterk Max. horizontal reach: 755 m Transport dimensions (LxWxH): 6.65x2.29x2.25 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Good working vacuum pump Ljdpfx Ajv Suuuodtsrk possibly with complete construction with water tanks, hydraulic tank, high pressure pump, high pressure hose reel, compressor...

Condition: used, Year of construction: 2012, total height: 1,450 mm, total length: 1,200 mm, total width: 800 mm, Type of fuel: Electric Drive: motorised Empty weight: 596 kg - Year: 2012 - Documentation available: No - CE certificate present: No - Serial number: ME000659 - Drive: Electric Lredpfx Aowtm H Rodtok - Type: Attachment - Transport dimensions: 1200mm x 800mm x 1450mm (l x w x h) - Transport weight [kg]: 596kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, Ledohpktvspfx Adtork - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: used, Year of construction: 2019, operating hours: 1,428 h, machine/vehicle number: Z4525M-8639, fuel type: diesel, Weights Empty weight: 6.129 kg Functional Mast: articulated arm Lifting capacity: 227 kg Working height: 1.600 cm Lrodpfxjyxvq No Adtek Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Outrigger Max. horizontal reach: 752 m Transport dimensions (LxWxH): 6.65x2.29x2.13 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2018, operating hours: 1,801 h, machine/vehicle number: Z4525XCM-461, fuel type: diesel, Weights Empty weight: 6.882 kg Functional Mast: articulated arm Lifting capacity: 454 kg Working height: 1.600 cm Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: Outrigger Max. horizontal reach: 755 m Ledpfxoyxambe Adtsrk Transport dimensions (LxWxH): 6.65x2.29x2.25 Additional information Please contact PFEIFER GROUP for more information