Used Seipee Zk71B-4 for sale (58,939)

Condition: good (used), machine/vehicle number: 3598, Year of construction: 2009, load capacity: 16,000 kg, lifting height: 5,000 mm, mast type: triplex, fork carriage width: 200 mm, fork length: 2,400 mm, total length: 4,960 mm, total width: 2,700 mm, operation weight: 31,490 kg, additional equipment features: Dual tread, Battery indicator, Side extraction of the battery, Equipment: lighting, Carer R160KN from Uniktruck Wheel type – Drive wheel: Supersoft Wheel type – Steering wheel: Supersoft Wheel size – Drive wheel: 12.00 x 20 Iiedeyuippopfx Afhsg Wheel size – Steering wheel: 12.00 x 20

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Iisdpfez Dmn Rsx Afhsg Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so

Condition: used, Year of construction: 2015, ALLU DS 4-12 bucket separator / screening bucket – manufactured in 2015 – 2,070 kg. For sale: an ALLU DS 4-12 bucket separator/screening bucket, manufactured in 2015. High-quality Finnish ALLU attachment for processing a wide variety of materials directly on the construction site. Technical data: * Manufacturer: ALLU Finland Oy * Type: DS 4-12 * Year of manufacture: 2015 * Serial number: DS41215444 * Weight according to nameplate: 2,070 kg * Recommended hydraulic oil flow: 95–160 l/min * For excavators approx. 20–35 t * 4 drums * Robust heavy-duty design Possible applications: * Sieving soil and topsoil * Construction rubble and recycled materials * Gravel and sand * Compost and biomass Iedjz Dm Nbjpfx Afhsig * Processing and separating soil material * Depending on the shaft configuration, also crushing and mixing The ALLU D series is designed for sieving, crushing, mixing, aerating, and loading material. Condition: used, with signs of wear and tear commensurate with its age. Inspection possible by appointment.

Condition: used, Year of construction: 2007, Overview This complete can filling line was manufactured mainly in 2007 and is designed for the filling of beer, carbonated soft drinks and other carbonated beverages in aluminium cans. The line has a capacity of approx. 6,000 cans per hour and is suitable for several can formats, including 250 ml slim, 330 ml sleek, 330 ml standard and 500 ml standard cans. The line includes depalletizing, carbonation, filling and seaming, tunnel pasteurization, tray packing / shrink wrapping, conveyors and control system. The equipment is still installed, currently out of production and available for inspection in Northern Europe. The layout shows a compact line arrangement with depalletizer, filler / seamer, tunnel pasteurizer and downstream packaging area. Technical Data - Line type: Complete can filling line - Capacity: approx. 6,000 cans/hour - Main year of manufacture: 2007 - Application: Beer, CSD and carbonated beverages - Can formats: 250 ml slim, 330 ml sleek, 330 ml standard, 500 ml standard - Packaging: 3x4 or 4x6 trays with shrink foil - Filling / seaming: Monoblock 16/4 - Control system: Siemens SIMATIC S7-300 - Condition: excellent condition - Status: still installed, currently out of production - Location: Northern Europe Inspection: possible anytime Scope of Delivery - Can Depalletizer | TMG Impianti | – | Included with conveyors | 2007 - Carbonator | Comac | Carbonator 1 Column | - | 2007 - Filling & Seaming Monoblock | MCD Bottling Solution / Comac | Can Filler 16-4 P.164.85 | 16 filling valves / 4 seaming heads | 2007 - Tunnel Pasteurizer | Comac | Tunnel Pasteurizer | 2007 Iiedezh Ifuepfx Afhog - Tray Packer / Shrink Wrapper | Dimac | Star One | For 3x4 and 4x6 trays with shrink foil | 2007 - Can Conveyors | Various | – | Complete conveyor system included | 2007

Condition: used, Year of construction: 2000, Overview Iodpfsy Azv Sex Afheig This cold glue labeling machine was manufactured in 2000 by Krones. The machine is designed for the application of cold glue labels on bottles. The machine is equipped with three labeling aggregates (front, back, and neck/seal label) and operates with a 20-head rotary table, making it suitable for medium-speed beverage production lines. The unit includes an integrated Krones Checkmat inspection system for quality control and comes with 11 bottle formats (0.5 – 1.0 L). Maintenance was performed as required. Technical data - Capacity: up to approx. 15,000 bph - Formats: 0.5 L – 1.0 L, 11 formats - Application: Cold glue labeling of bottles - Configuration: 20-head rotary table, 3 labeling aggregates - Label positions: Front, back, neck/seal label - Utilities: Standard Krones control system - Incl. 3 glue pumps for cold glue system, Inspection system (Krones Checkmat), Format parts, Documentation

Condition: good (used), Year of construction: 2006, Waste compactor, waste compactor, compactor container, waste container, self-compacting container, waste compactor, paper compactor container, paper container, cabinet compactor, vertical baler -Manufacturer: Bramidan, cabinet baler, vertical baler Iiedpfx Afexnb Nyehog -Type: 4-0 S50 KBP PES243768-2 -Drive power: 5.5 kW -Pressure pressure: 50 t -Bale size: 1360 780 x H1200 mm -Bald weight of cardboard: 400 - 500 kg -Bald weight plastic: 450 - 600 kg -Filling opening: WxH 1350 x 760 mm -Bale ejection device: Bale dimensions 1200x800x1100 mm -Transport dimensions: 1400/2040/H2880 mm (press can be laid down for transport) -Weight: 2750 kg

Condition: used, Year of construction: 2022, Overview The rotary filling and capping machine manufactured by Bertolaso in 2022 is currently used for vinegar production. It features 30 filling valves and 4 capping stations and operates based on the atmospheric filling principle. The machine can be used with a wide range of shape-stable containers and is suitable for filling low-viscosity, non-carbonated liquids. Technical details:  Iiodpfx Afjxqz D Aeheg Filler: 30 valves (Ø16 mm), model Olimpia 30/1050 Capper: 4 Pick & Place heads, model Sigma P&P 4/350 Bottles: 600 ml & 1000 ml cylindrical (range Ø55–95 mm, H160–360 mm) Caps: Pre-threaded plastic Output: 8,000 bph (600 ml) / 6,000 bph (1000 ml) Material: All product-contact parts in AISI 316 stainless steel Bowl: Electrically height-adjustable, mechanical float level control Features: - Automatic valve opening/closing - Centralized fill-level adjustment (±50 mm) - Maintenance-free lifting cylinders - Automated lubrication system - Integrated washing/CIP system - Remote teleservice via Ethernet Safety: CE compliant, transparent guards with microswitches Includes: Format parts for 600 & 1000 ml bottles; adjustable star wheels (+/- Ø55-95mm)  

Condition: used, Year of construction: 2008, Overview  This cold glue labeller was manufactured in 2008 by the German company Gernep. The machine is designed for applying labels using cold glue technology and is immediately available for sale. Technical data  - Manufacturer: Gernep - Model: Labetta 4/3/10 640 2A - Year: 2008 Iiodpfx Afjwaxyishsg - Direction of rotation: Left-hand machine (bottle plate rotates counterclockwise) - Nominal capacity: 14,000 bottles/hour - Adjustable from 3,000 - 15,000 bottles/hour - 2 cold glue units - Label positions: Body, front, back - Bottle formats: - 0.5L NRW bottle - 0.33L Vichy bottle - 0.33L Ale bottle

Condition: excellent (used), Year of construction: 2024, operating hours: 86 h, lifting height: 3,400 mm, fuel type: diesel, mast type: duplex, fork length: 1,400 mm, front tire size: 12.5/80-18/12, rear tire size: 27X10-12, total height: 2,150 mm, total length: 4,190 mm, total width: 1,450 mm, color: other, Year of manufacture: 2024 Front tyre size: 12.5/80-18/12 Rear tyre size: 27X10-12 Lifting capacity: 2.500 kg CE mark: yes Registration number: T-59-GJD Manitou MC 25-4 Building year: 2024 Working hours: 86 h Engine: Kubota 37KW Weight: 4068 kg Lifting height: 3.4 mtr Closed height: 2,15 mtr Mast: Duplex Capacity: 2500 kg Drive: 4x4 CE certified Price is excluded VAT Machine from our rentalfleet. (still in rental) For more pictures and productvideo look at our website Iodpsw Uffgsfx Afhsig Good working condition

Condition: good (used), mileage: 645,000 km, power: 382 kW (519.37 HP), fuel type: diesel, tire size: 385/65R 22.5, axle configuration: 6x2, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2016, Colour: Blue Details Manufacturer: Scania Type: R520 LA 6x2/4 HNB Chassis number: YS2R6X20005418765 Year: 2016 Mileage: approx. 645,000 km Engine: 16 L | DC16 101 | 520 HP | S8 | Diesel | EURO 6 Transmission: Automatic transmission Front axle: Air suspension | 8,000 kg | 385/65R 22.5 Second axle: Air suspension | Steering | 7,500 kg | 385/65R 22.5 Rear axle: Air suspension | Driven | 11,500 kg | 315 / 80R 22.5 | Double tires Wheelbase: 2,750 mm / 1,300 mm GVW: 27,000 kg GCW: 66,000 kg Equipment 540L + 175L fuel tanks AdBlue tank, 65 L 24-volt electrical system JOST JSK 38 C fifth wheel Pneumatically operated sliding fifth wheel Central lubrication Work lights Side skirts & roof spoiler Cab Multi-functional steering wheel Cruise control Refrigerator 2 x Bed Comfortable seats Storage boxes Night AC / climate control Radio CD player / Bluetooth = Further information = General information Year of manufacture: 2016 Axle configuration Suspension: Air suspension Front axle: Tire size: 385/65R 22.5; Max. axle load: 8,000 kg; Steerable Rear axle 1: Tire size: 385/65R 22.5; Max. axle load: 7,500 kg; Steerable Rear axle 2: Tire size: 315 / 80R 22.5; Double tires; Max. axle load: 11,500 kg Weights Payload: 66,000 kg Isdpfx Ajzy Rniefhjig GVW: 27,000 kg Condition Technical condition: good Optical condition: good Financial information Price: On request

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2265.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Isdpfx Ajzy U A Rjfhjig Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 350 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 350 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2356.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Iisdpozy Uzgefx Afhjg Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Ijdpfxezy Uzte Afhoig Data: - H: approx. 416 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2631.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Our recommendation: Tell us what you need... We will be happy to help you realize your projects, from planning to ordering to installation. Delivery is possible on request at a reasonable price.

Condition: good (used), mileage: 497,708 km, power: 368 kW (500.34 HP), first registration: 05/2021, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 4,100 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,400 mm, total width: 2,550 mm, total height: 3,950 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, seat heater, traction control, - Heated mirrors - CarPlay - Digital tachograph - Driver's card (control unit) - Highline - Air conditioning - Compressor - LED lamp - Alloy wheels - Manual - Auxiliary drive - Radio/cassette - Rear view camera - Slider - Lane keeping assist - Fabric - Auxiliary braking system Number of axles: 3, Configuration: 6x2, Twin tires, Tare weight: 9004 kg, Gross vehicle weight: 27000 kg, Total tank capacity: 550 liters, Fifth wheel height: 125 cm, Fifth wheel: Slider, Number of locks: 1, Alloy wheels, Suspension type: Full air, Cabin type: Highline, Cruise control, Driver's card (control unit), Digital tachograph, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, CarPlay, GPS navigation, Color: Red, Heated mirrors, Rear view camera, Lighting type: LED lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Engine power: 368 kW (493 Hp), Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Transmission type: Scania, Gears: 12, Auxiliary braking system, Retarder brand: Scania, Power steering, ABS, ASR, Compressor, Auxiliary drive, PTO type: 2, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, 6x2/4 Retarder Full Air 1 BED ADR Ijdezv Nycspfx Afhsig Transmission Transmission: SCA, 12 gears, Automatic Axle configuration Brakes: Disc brakes Axle 1: Tire size: 385/55R22.5; Steered; Tire tread depth left: 7 mm; Tire tread depth right: 7 mm; Suspension: Leaf suspension Axle 2: Tire size: 385/55R22.5; Lift axle; Steered; Tire tread depth left: 8 mm; Tire tread depth right: 8 mm; Suspension: Air suspension Axle 3: Tire size: 315/70R22.5; Twin tires; Tire tread depth left inside: 7 mm; Tire tread depth left outside: 7 mm; Tire tread depth right inside: 7 mm; Tire tread depth right outside: 8 mm; Suspension: Air suspension Weights Unladen weight: 9,004 kg Payload: 17,996 kg GVW: 27,000 kg Condition Technical condition: good Optical condition: good Damages: none Number of keys: 4 Financial information Leasing price: €1,101 per month (default, 60 months); Ask for more information and conditions Identification Registration number: KLEYN1 Kleyn Trucks is one of the largest independent used vehicle dealers in the world. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands from various years and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 651,948 km, power: 368 kW (500.34 HP), first registration: 06/2020, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 4,100 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 6,340 mm, total width: 2,550 mm, total height: 3,810 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, retarder, seat heater, traction control, - 2. Diesel tank - Heated mirrors - Carplay - Digital tachograph - Driver's card (recording device) - Fixed - Highline - LED lamp - Manual - Radio/cassette - Lane keeping assist - Blind spot sensor - Auxiliary braking system Number of axles: 3, Configuration: 6x2, Tare weight: 9150 kg, Gross vehicle weight: 26500 kg, Total tank capacity: 475 liters, 2. Diesel tank, Fifth wheel height: 103 cm, Fifth wheel: Fixed, Number of locks: 1, Winch pulling capacity: 4 tons, Suspension type: Full air, Cabin type: Highline, Cruise control, Driver's card (recording device), Digital tachograph, Air conditioning, Parking cooler, Parking heater, Electric windows, Electric mirrors, Radio/cassette, Carplay, GPS navigation, Color: White, Heated mirrors, Lighting type: LED lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Blind spot sensor, Flashing lights, Engine power: 368 kW (493 Hp), Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Transmission type: Scania, Gears: 12, Auxiliary braking system, Retarder brand: Scania, Power steering, ABS, ASR, Central locking, Seat configuration: 1+1, Seat cover: Leather, Seat adjustment: Manual, 6x2/4 Mega Full Air Retarder Leather LED Transmission Transmission: SCA, 12 gears, Automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/55R22.5; Steerable; Tire tread depth left: 12 mm; Tire tread depth right: 11 mm Axle 2: Tire size: 355/50R22.5; Lift axle; Steerable; Tire tread depth left: 10 mm; Tire tread depth right: 10 mm Axle 3: Tire size: 295/60R22.5; Dual tires; Tire tread depth left inside: 5 mm; Tire tread depth left outside: 4 mm; Tire tread depth right inside: 4 mm; Tire tread depth right outside: 5 mm Iedezwcxnspfx Afhjig Weights Tare weight: 9,150 kg Payload: 17,350 kg GVW: 26,500 kg Interior Upholstery: Leather Condition Technical condition: good Optical condition: good Damage: none Number of keys: 4 Financial information Leasing price: €953 per month (default, 60 months); Ask for more information and conditions Identification License plate: KLEYN1 Kleyn Trucks is one of the largest independent used vehicle dealers in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various production years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,425 h, load capacity: 2,000 kg, lifting height: 4,400 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 2,060 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Transmission: Automatic Condition: Refurbished, no warranty Technical Condition: Very good Front Tire Type: Superelastic Front Tire Condition: 80 - 100% Rear Tire Type: Superelastic Rear Tire Condition: 80 - 100% Battery Voltage: 48V Battery Capacity: 750Ah Battery Year of Manufacture: 2019 Description: Price includes a new UVV inspection. The battery will be regenerated using a power cycler, including a Kappa test. Charger included, suitable with plug. A new paint job can be purchased for an additional EUR 1,000.00 (net). We will gladly arrange cost-effective transport for you. A lease-purchase option is generally possible. We are an official Jungheinrich partner. Side shifter, Iijdpfx Afezn A S Nohjg 3rd valve, rear work light, front work light, half-cabin, load protection grid, STVZO compliant, full free lift, CE certificate, safety light.

Condition: good (used), mileage: 653,447 km, power: 368 kW (500.34 HP), first registration: 01/2023, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 4,760 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 9,700 mm, total width: 2,550 mm, total height: 3,770 mm, Year of construction: 2023, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, seat heater, traction control, - Heated mirrors - Digital tachograph - Tachograph (recording device) - Fixed - LED lamp - Alloy wheels - Manual - Radio/cassette - Sleeper cab - Lane departure warning system - Fabric - Blind spot sensor - Auxiliary braking system Number of axles: 3, Configuration: 6x2, Tare weight: 11460 kg, Gross vehicle weight: 27000 kg, Total tank capacity: 550 liters, Chassis height: 98 cm, Fifth wheel coupling: Fixed, Number of locks: 1, Winch pulling capacity: 2 tons, Alloy wheels, Suspension type: Air suspension, Type of cab: Sleeper cab, Cruise control, Tachograph (recording device), Digital tachograph, Air conditioning, Number of airbags: 1, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Carplay, GPS navigation, Color: Multi-colored, Heated mirrors, Lighting type: LED lamp, Lane departure warning system, Climate control, Seat heating, Bluetooth, Blind spot sensor, Engine power: 368 kW (493 hp), Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Transmission type: Scania, Gears: 12, Auxiliary braking system, Retarder brand: Scania, Power steering, ABS, ASR, Central locking, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, CR 19, durabright, 6x2*4 Transmission Transmission: SCA, 12 gears, Automatic Axle configuration Brakes: Disc brakes Axle 1: Tire size: 385/55R22.5; Steered; Tire tread depth left: 7 mm; Tire tread depth right: 6 mm; Suspension: Leaf spring suspension Axle 2: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 5 mm; Tire tread depth left outer: 5 mm; Tire tread depth right inner: 3 mm; Tire tread depth right outer: 5 mm; Suspension: Air suspension Axle 3: Tire size: 385/55R22.5; Lift axle; Steered; Tire tread depth left: 8 mm; Tire tread depth right: 3 mm; Suspension: Air suspension Weights Tare weight: 11,460 kg Payload: 15,540 kg Iiedjzwlguepfx Afheg GVW: 27,000 kg Maintenance APK (Technical Inspection): valid until 01.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: €953 per month (default, 60 months); Inquire for more information and terms. Identification License plate: KLEYN1 Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands from various years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty...

Condition: used, mileage: 457,551 km, power: 346 kW (470.43 HP), first registration: 11/2020, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, wheelbase: 4,510 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro6, suspension: steel-air, Year of construction: 2020, Equipment: air conditioning, electric window regulation, spoiler, trailer coupling, Front axle: Tyre size: 385/65R22.5; Suspension: leaf suspension Rear axle 1: Tyre size: 315/80R22.5; Double wheels; Suspension: air suspension Rear axle 2: Tyre size: 385/55R22.5; Steering; Suspension: air suspension Drive: Wheel Number of cylinders: 6 Engine capacity: 12.419 cc GVW: 26.000 kg Engine type: MAN D2676 LF Make of bodywork: AJK Iiodoyplm Tspfx Afhog = Additional options and accessories = - Refrigerator - Roof spoiler - Tipper hydraulics

Condition: used, mileage: 10,878 km, power: 382 kW (519.37 HP), first registration: 08/2023, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 3,600 mm, fuel: diesel, brakes: intarder, color: blue, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, Year of construction: 2023, Equipment: air conditioning, crane, electric window regulation, navigation system, trailer coupling, Technical information Iijdpsu U Ed Hefx Afheg Number of cylinders: 6 Engine capacity: 12.419 cc GVW: 35.000 kg Drivetrain Drive: Wheel Engine type: MAN D2676 LFAX Transmission Transmission: 12 TX 2621 TD + IT3, 12 gears, Automatic Axle configuration Axle 1: Tyre size: 385/65R22.5; Suspension: leaf suspension Axle 2: Tyre size: 315/80R22.5; Double wheels; Suspension: air suspension Axle 3: Tyre size: 315/80R22.5; Double wheels; Suspension: air suspension Axle 4: Tyre size: 385/65R22.5; Steering; Suspension: air suspension Functional Make of bodywork: AJK L170 K = Additional options and accessories = - PTO

Condition: used, mileage: 451,564 km, power: 206 kW (280.08 HP), first registration: 12/2009, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 4,150 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro4, suspension: steel-air, loading space volume: 13 m³, Year of construction: 2009, Equipment: electric window regulation, Applicable material: Fuel Tyre size: 315/70R22,5 Front axle: Suspension: leaf suspension Ijdswc Eabjpfx Afhoig Rear axle: Double wheels; Suspension: air suspension Drive: Wheel Empty weight: 7.120 kg Carrying capacity: 10.870 kg GVW: 17.990 kg Number of compartments: 4

Condition: good (used), mileage: 172,010 km, power: 360 kW (489.46 HP), first registration: 08/2017, fuel type: diesel, tire size: 355/50R22.5, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: green, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, Year of construction: 2017, Equipment: ABS, cruise control, electric window regulation, fog lights, fridge, navigation system, onboard computer, parking air conditioner, retarder, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Roof spoiler - Cab - Alloy wheels - Air suspension - Spare wheel - Sun visor = Notes = Scania R490 Highline 6x2/4 - Low mileage, 172,000 km - Retarder - Night climate control - Alloy wheels Year of manufacture: 09-08-2017 Mileage: 172,010 YS2R6X20005477598 Original low mileage Retarder Night climate control Steering axle Sliding fifth wheel Navigation system = Additional Information = Technical Information Number of cylinders: 6 Transmission Gearbox: Opti Cruise, 12 gears, automatic Axle Configuration Suspension: Air suspension Front axle: Tire size: 355/50R22.5; Alloy wheels; Steerable; Tire tread depth left: 40%; Tire tread depth right: 40% Iijdszzk Hbopfx Afhjg Rear axle 1: Tire size: 355/50R22.5; Alloy wheels; Steerable; Tire tread depth left: 40%; Tire tread depth right: 40% Rear axle 2: Tire size: 295/60R22.5; Dual tires; Alloy wheels; Tire tread depth left inner: 60%; Tire tread depth left outer: 60%; Tire tread depth right inner: 60%; Tire tread depth right outer: 60% Weights Unladen weight: 8,490 kg Payload: 17,510 kg GVWR: 26,000 kg Condition Technical condition: good Optical condition: good

Condition: good (used), mileage: 150,113 km, power: 400 kW (543.85 HP), first registration: 10/2020, fuel type: electric, axle configuration: 6x2, wheelbase: 44,950 mm, fuel: electricity, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2020, Equipment: central locking, cruise control, = Additional Options and Accessories = - Rear work lights - Front work lights - Windscreen - Enclosed cab - Cab - Automatic heating system Iiedpfx Afey Hrwbsheg = Notes = Volvo FE Electric - 6x2*4 - BDF - Full Air - 100% Electric - Low Mileage MY: 26-10-2020 KM: 150,113 YV2VB40C9LZ132195 100% Electric - Zero emission BDF Full air suspension Rear steering axle Alloy wheels Low mileage = Further Information = Front axle: Max. axle load: 8,000 kg; Steered Rear axle 1: Twin tires; Max. axle load: 11,500 kg Rear axle 2: Max. axle load: 7,500 kg; Steered Unladen weight: 9,825 kg Payload: 17,175 kg gross vehicle weight: 27,000 kg Technical condition: good Visual condition: good Please contact VAEX The Truck Traders for more information.

Condition: used, mileage: 407,797 km, power: 324 kW (440.52 HP), first registration: 02/2016, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2016, Equipment: AdBlue, central locking, cruise control, soot filter, = Additional options and accessories = - Leaf spring suspension - Cab - Air suspension - Particulate filter - PTO (Power Take-Off) = Remarks = Daf CF440 6x2*4 - JOAB Skiploader - Euro 6 - Steering axle Year of manufacture: 3-2-2016 KM: 407797 XLRASM4100G084248 JOAB Skiploader Euro 6 Steering axle Euro 6 = Further information = Transmission: AS Tronic, automatic Front axle: Max. axle load: 9000 kg; Steering; Suspension: leaf spring Rear axle 1: Twin tyres; Max. axle load: 11,500 kg; Suspension: air suspension Isdpfx Afsyw R A Dohsig Rear axle 2: Max. axle load: 7,500 kg; Steering; Suspension: air suspension Number of cylinders: 6 GVW: 28,000 kg

Condition: excellent (used), mileage: 21 km, power: 520 kW (707.00 HP), first registration: 04/2026, fuel type: diesel, axle configuration: 6x6, wheelbase: 4,150 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: other, emission class: euro3, Year of construction: 2026, Equipment: ABS, air conditioning, differential lock, electric window regulation, fog lights, retarder, trailer coupling, = Additional Options and Accessories = - All-wheel drive - Leaf spring suspension - Differential lock - Intarder - Cab - Sun visor - Power take-off (PTO) = Additional Information = Transmission: TURBO RETARDER CLUTCH, continuously variable transmission Front axle: Steerable Number of cylinders: 6 GVWR: 180,000 kg Technical condition: very good Isdsyyypfopfx Afhjig Optical condition: very good

Condition: good (used), mileage: 476,184 km, power: 272 kW (369.82 HP), first registration: 10/2014, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, fuel: diesel, gearing type: automatic, number of gears: 12, emission class: euro6, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2014, Equipment: AdBlue, air conditioning, central locking, cruise control, fog lights, onboard computer, soot filter, = Further options and accessories = - Front work lights - Heated mirrors - Windscreen - Enclosed cab - Cab - Air suspension - Particulate filter - PTO (power take-off) = Remarks = Iodpfxjy Hq A Ao Afhoig Volvo FM370 6x2*4 – HIAB X-Hiduo 188 E-5 Crane with remote control – Euro 6 MY: 23-10-2014 KM: 476184 YV2X922C1EA768827 HIAB Crane with remote control Rear steering axle Euro 6 I-Shift Sideboards = Further Information = Transmission Transmission: I-Shift, 12-speed, automatic Axle Configuration Front axle: Tyre size: 385/55R22.5; Max. axle load: 9,000 kg; Steered; Left tyre tread: 40%; Right tyre tread: 40% Rear axle 1: Tyre size: 315/70R22.5; Twin tyres; Max. axle load: 11,500 kg; Left inner tread: 50%; Left outer tread: 50%; Right inner tread: 50%; Right outer tread: 50% Rear axle 2: Tyre size: 385/55R22.5; Max. axle load: 7,500 kg; Steered; Left tread: 50%; Right tread: 50% Weights Unladen weight: 14,363 kg Payload: 13,636 kg Gross vehicle weight: 27,999 kg Functional Details Body manufacturer: HIAB X-Hiduo 188 E-5 Condition Technical condition: good Visual condition: good