Used Servo Multiple Amplifier 1 Piece for sale (82,354)

Condition: new, Year of construction: 2024, functionality: fully functional, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As a manufacturer, we offer you maximum precision and efficiency with a capacity of 3050 mm in length and 175 tons. Benefit from our comprehensive all-in-one service: We take care of transportation, installation, commissioning and offer you a one-year warranty as well as fast and reliable service. Visit us and see the quality and versatility of this first-class machine for yourself. Standard equipment Capacity (length - ton) 3050mm - 175t Rsdpfstr Dk Esx Al Iot Installation height 530mm Outreach 450mm Stroke 265mm Servo drive Y1, Y2, X - 3 axles Control unit - DT 15 Manuel F. AKAS FPSC safety system CE-Fiessler Akas Servo motor backgauge & linear guide & Ball screw system Manual crowning European tool holder Sliding front arms Options - DELEM 69S control unit (3D control) -Motorized crowning - 6 axes X=650mm Y1, Y2, X ,R , Z1, Z2 (6 axes controlled press brake) press brake) -Lower tool European M.460R.85 -European upper tool P135.75.R08

Condition: used, mileage: 153,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. In service with a small municipality until 2026, initially used by the fire brigade and then by the municipal works department. This vehicle has civilian truck registration as a "box body truck" and is officially rated for 9 seats in the registration papers. The vehicle was originally operated as a multi-purpose vehicle (MZF), and afterwards was used to transport the municipality’s lawn mower. Only 1 bench seat is permanently mounted. 2 of the 3 bench seats were not used in recent years and are included loose. The original seat belts and mounting bolts are also supplied. A fold-out table with a radio handset is still installed on the left side, and a genuine large fire brigade first aid kit is integrated into the fit-out. OM 602 engine, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and runs cleanly at first, but after about 20 seconds at idle the running characteristics at idle worsen significantly and smoke develops. Once warmed up, the smoke subsides and the engine runs cleanly again, almost normally. The engine is either heavily worn or there is engine damage. No precise diagnosis so far. The vehicle drives immediately and functions well; typical engine power was fully and consistently available during a brief test drive, but we do not guarantee roadworthiness. A repair is certainly necessary in the near term! For driving short distances or boarding a RORO ship at port under its own power towards Africa, this 310 D appears completely unproblematic. 5-speed manual transmission. 127 km/h top speed. Tow hitch (ball head) with a braked trailer load of 2,000 kg or 750 kg unbraked. Power steering. Factory-installed auxiliary heater Mercedes/Eberspächer (working). Rodpfx Aloyx N Hqe Iot Bodywork has isolated rust spots; overall, due to years of storage indoors, the vehicle is still in comparatively good condition. The passenger door window is broken and covered with a film. The paint below has previously been touched up in black. The vehicle clearly received very good maintenance while with the fire brigade—unfortunately, this was not maintained afterwards. Opening the sliding door mechanically deploys a large step. Unladen weight: 2,370 kg. Gross vehicle weight rating: 3,200 kg. External overall vehicle dimensions: Length 5,345 mm / Width 1,975 mm / Height 2,680 mm. The tires (205R14C) are from 2013 and not cracked, tread depth approx. 50-60%. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unvarnished basis for restoration. MOT expired 12/2025, will not be renewed. We do not have our own workshop. We have deliberately priced the vehicle attractively, as genuinely good comparable vehicles are now usually being traded for double or even higher prices. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for businesses, freelancers, and public authorities of any kind. Sale to private end users is strictly excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT incurred (according to §25a of the German VAT Act / margin scheme).

Condition: new, x-travel 1000 mm y-travel 360 mm z-travel 400 mm spindle taper ISO 40 ISO table: 1370 x 300 mm feed: 30-830 / 23-625 mm/min. turning speeds 45 - 1660 U/min distance spindle /table 60 - 460 mm rapid traverse Z Achse 750 mm/min throat 95 - 575 mm total power requirement 3.0 kW weight of the machine ca. 1505 kg range L-W-H 1740 x 1860 x 1900 mm - Large rectangular guide in y and z axes - ensure increased stability - 8x automatic feeds and rapid traverse in all axes - driven by servo motor - Universal milling head system "Huron", adjustable to all angular positions - Swiveling control panel with ergonomically placed switches - Heavy machine stand made of gray cast iron for vibration-free work - Very smooth running thanks to ground gears running in an oil bath - Upper arm with clearly structured gear box for the spindle speed - Digital position display for x, y and z axes included in delivery - Precisely surface-machined cross table with T-slots Scope of delivery - 3-axis digital display ES-12 H with LCD display - Drawbar spindle M16 - LED machine light - Feed for x, y and z axes - Coolant system Rjdpfxsxaak Ts Al Iot - Counter bearing - Long milling arbor ISO 40 / 27 mm - Combined milling arbor ISO 40 / 27 mm - Coolant tray - Adjustable protective device - Central lubrication for x, y and z axes - Operating tool

Condition: new, Year of construction: 2026, Cormak press brakes are advanced devices that enable precise bending of sheet metal thanks to appropriately selected punches and dies. Our offer includes models equipped with DELEM DA-53TX controllers as standard and optionally DELEM DA53T, DA-58T, DA-66T, DA69T and CYBELEC 12 controllers, which provide a wide range of functions that allow for the implementation of the most demanding bending tasks. Dkeb A D Nwouw Ri Asw Aon Main Features: Front supports: 2 pieces on linear guides, ensuring stability during bending operations Y1, Y2 axis adjustment: automatic Back stop adjustment (X axis): servo drive on encoders R axis adjustment: servo drive on encoders Automatic adjustment of the deflection arrow Double-sided punch mounting: quick assembly type AMADA, enabling quick tool changes Technical parameters Max. thickness of bent sheet metal (S235) up to 6.0 mm Rodpfx Aleuw Scde Ist Nominal pressure 1700 kN Maximum length of bent sheet metal 3200 mm Depth of cut in beams (throat) 320 mm Maximum stroke of moving beam 120 mm Maximum opening height 390 mm Distance between beams 2700 mm Rear bumper departure 600 mm Engine power 9.5 kW Length 3870 mm Width 1550 mm Height 2460 mm Weight 7400 kg Additional equipment and models with different pressure available. Please contact the seller.

Condition: new, Year of construction: 2026, Cormak press brakes are advanced devices that enable precise bending of sheet metal thanks to appropriately selected punches and dies. Our offer includes models equipped with DELEM DA-53TX controllers as standard and optionally DELEM DA53T, DA-58T, DA-66T, DA69T and CYBELEC 12 controllers, which provide a wide range of functions, enabling the implementation of the most demanding bending tasks. Main Features: Front supports: 2 pieces on linear guides, ensuring stability during bending operations Y1, Y2 axis adjustment: automatic Rear stop adjustment (X axis): servo drive on encoders R axis adjustment: servo drive on encoders Automatic adjustment of the deflection arrow Double-sided punch mounting: quick assembly type AMADA, enabling quick tool changes Technical parameters Max. thickness of bent sheet metal (S235) up to 6.0 mm Nominal pressure 1300 kN Maximum length of bent sheet metal 3200 mm Depth of cut in beams (throat) 320 mm Maximum stroke of moving beam 120 mm Maximum opening height 390 mm Distance between beams 2700 mm Rear bumper departure 600 mm Engine power 9.5 kW Length 3870 mm Width 1550 mm Height 2460 mm Weight 7400 kg Additional equipment available. Please contact the seller. Rjdpfx Aljuw Ri Aj Ist

Condition: new, Year of construction: 2026, The fully automatic aluminum circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) was specially developed for cutting profile and solid materials made of cast aluminium, copper and hard plastics. An automatic feed and an automatic cutting movement are ideal for fast and precise series production! The material feed is up to 700 mm with one stroke. Multiple strokes and thus longer sections can be easily entered from the control panel. The main vice clamps the material over two horizontal and two vertical clamping cylinders, the material feed clamps over one horizontal and one vertical clamping cylinder. The cutting and feed speed can be adjusted to suit the material to be cut via the large and clearly arranged control panel! The machine is equipped with a mechanical lifting height adjustment, the maximum cutting height is 100 mm. A large protective hood covers the entire work area and is lifted pneumatically at the push of a button! The UK 350 A 90° CNC + drilling unit comes standard with an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. This machine is equipped with the vertical drilling unit TR 14 (drilling capacity up to ø 14 mm, thread M12). This has a connection to the cycle control of the aluminum circular saw. Rjdpekqz H Defx Al Ijt

Condition: good (used), Year of construction: 2011, clamping force: 240 kN, screw diameter: 50 mm, displacement volume: 540 cm³, injection pressure: 2,470 bar, injection weight: 491 g, mold height (min.): 350 mm, Battenfeld HM 500/3400 Injection Moulding Machine General Specifications Clamping force: 240 t Year of manufacture: 2011 Control system: Unilog B6 Injection Unit Unit designation: ... / 1330 Screw diameter: 50 mm Injection pressure: 2470 bar Injection volume: 540 cm³ Screw L/D ratio: 22 Clamping Unit Clamping system: 240 / ... Clamping force: 240 t Platen dimensions: 910 x 930 mm Clearance between tie bars: 630 x 570 mm Ejector force: 59 kN Ejector stroke: 200 mm Rodpfx Ajyzzkgjl Ist Mould height: 350 mm Opening stroke: 725 mm Max. daylight (max. platen distance): 1075 mm Dimensions and Weight Weight: 10,000 kg Dimensions (L x W x H): 5.5 x 1.8 x 2.4 m

Condition: used, mileage: 60,000 km, power: 124 kW (168.59 HP), first registration: 12/1974, overall weight: 11,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, next inspection (TÜV): 12/2026, gearing type: mechanical, loading space width: 2,450 mm, loading space length: 4,680 mm, loading space height: 1,450 mm, Year of construction: 1974, total width: 2,470 mm, total height: 3,050 mm, Equipment: all wheel drive, 1st hand. German fire truck with valid TÜV (general inspection) and SP (special inspection) until 12/2026. Regular registration valid until 18.02.2026. For 30 years (after its official service life), this vehicle has only been kept as a collector’s item in a hall, always regularly serviced, driven, and exceptionally well maintained by the fire department. In the meantime, it was transferred to the local airport. Bachert body in an aluminum-steel composite construction, extremely robust and built to last, with great attention to detail. The heavy-duty roller shutters and flaps are all still working perfectly. Rsdjyndg Nepfx Al Iot The 1113 starts immediately and is ready to drive. Good original condition. There are signs of use from over 50 years of firefighting service. No serious defects or significant rust damage are visible on the vehicle. Overall, a solid round-hood model. LAF 1113 B with 3 windshield wipers. Power steering. OM 352 A 6-cylinder diesel engine with turbocharger and just under 170 hp. 85 km/h is registered as the top speed in the papers. 5-speed manual transmission. PTO (power take-off). Hydraulic system for auxiliary equipment. Selectable 4x4 all-wheel drive. Wheelbase: 4200 mm. 3 seats. Large Rockinger trailer coupling with air connections and 10,000 kg braked towing capacity. Maximum unbraked towing capacity is 1,500 kg. RW2 rescue vehicle body with winch, power generator, and light mast. Winch: Rotzler 5 tons with 65 m steel cable. Power generator: Knurz-Kirsch 20s. Output: 20 kVA. Light mast at the left rear, hydraulically extendable. Roof is accessible via rear ladder, with aluminum checker plate, and two large storage boxes. Overall vehicle dimensions: 7300 mm long / 2470 mm wide / 3050 mm high. Box body dimensions (external measurement) approx.: 4680 mm long / 2450 mm wide / 1450 mm high. Tires: 8.25-20/14 PR, apparently without DOT marking, not porous and in good condition. The 1113 was previously registered as “Other Vehicle – Fire Brigade – Rescue Vehicle”. Battery charging socket and manual battery disconnect switch on the driver’s seat console. The odometer was replaced in 2018 and now shows 141,000 km. The original odometer with 27,000 kilometers was retained and correctly handed over to us by the fire brigade. The actual total mileage is a maximum of 60,000 kilometers, in reality likely much less. As the inspection log has been continuously maintained with mileage figures for the last 25 years, both the mileage and the odometer replacement during this period can be reliably and continuously documented. In addition to the original odometer, there is a box full of original Daimler-Benz and Bachert documents, as well as paperwork such as logbooks and generator documentation, most of which are original documents from the year of manufacture 1974. Everything is in good and well-preserved condition. The documents are not for sale separately, nor will they be copied; please accept these facts as presented. Only the buyer of the 1113 will receive these treasures along with the vehicle from us. This offer is only for tradespeople, freelancers, authorities (BOS), public institutions, and all kinds of comparably self-employed businesses. Sale to private end users is, unfortunately, not possible. Interim sale and errors excepted at any time. Net price: €18,900!

Condition: used, Year of construction: 2013, clamping force: 2,400 kN, screw diameter: 55 mm, displacement volume: 653 cm³, injection pressure: 2,041 bar, ejector force: 59 N, Clamping force: 240 t Year of manufacture: 2013 Injection unit .../1330 Screw diameter: 55 mm Specific injection pressure: 2041 bar Injection volume: 653 ccm Screw L/D ratio: 22 Tool clamping system 240/... Clamping force: 240 t Mould platen dimensions: 910 x 930 mm Clearance between tie bars: 630 x 570 mm Ejector force: 59 kN Mold height: 350 mm Opening stroke: 725 mm Max. platen distance: 1075 mm Ejector stroke: 200 mm Weight: 10,000 kg Dimensions (m) L x W x H: 5.5 x 1.8 x 2.4 m Year of manufacture: 2013 Control: Unilog B6 Rjdpjyvtu Hofx Al Iet

Condition: new, Bernardo Universal Milling Machine UWF 110 Servo -1000 Technical specifications table size 1370 x 300 mm Spindle mounting ISO 40 mm spindle speed (11) 45 - 1660 rpm Travel lengthwise (x) 1000 mm traverse path cross (y) 360 mm Travel vertical (z) 400 mm Distance spindle / table 60 - 460 mm throat 95 - 575 mm Table can be tilted -45° to + 45 Max. workpiece weight workpiece weight 250 kg Feed range longitudinal / transverse (8) 30 - 830 mm/min Feed range vertical (8) 23 - 625 mm/min Rapid traverse x-, y- and z-axis 1000 / 1000 / 750 mm/min T-slots (number / width / distance) 3 / 14 mm / 80 mm Main motor 3,0 kW Rjdpeg Hzbxsfx Al Iot Servo motor (torque / power) 10 Nm / 1.5 kW Coolant pump power 60 W Coolant pump flow rate 12 l/min Machine dimensions (W x D x H) 1740 x 1860 x 1900 mm Weight approx. 1505 kg Scope of delivery - 3-axis digital display ES-12 H with LCD display - M16 tightening spindle - LED machine light - feed for x-, y- and z-axis - coolant device - counter bearing - Long milling arbor ISO 40 / 27 mm - Combination arbor ISO 40 / 27 mm - Coolant trough - Adjustable guard - Central lubrication for x-, y- and z-axis - Operating tool

Condition: new, x-travel 1000 mm y-travel 360 mm z-travel 400 mm spindle taper ISO 40 ISO table: 1370 x 320 mm feed: H 80 - 830 / V 23-625 mm/min. turning speeds H 35 - 1500 / V 45 - 1660 U/min distance spindle /table H 30 - 430 / V 210-610 mm rapid traverse Z Achse 750 mm/min throat 305 - 805 mm T-slots 3 x 14.0 mm table - swivable ° workpiece weight max. 300 kg coolant pump 25.0 L/min. total power requirement 7.6 kW weight of the machine ca. 1540 kg range L-W-H 1840 x 1830 x 2050 mm - Large rectangular guide in y and z axes - ensure increased stability - 8x automatic feeds and rapid traverse in all axes - driven by servo motor - Universal milling head system "Huron", adjustable to all angular positions - Swiveling control panel with ergonomically placed switches - Heavy machine stand made of gray cast iron for vibration-free work - Very smooth running thanks to ground gears running in an oil bath - Upper arm with clearly structured gear box for the spindle speed - Digital position display for x, y and z axes included in delivery - Precisely surface-machined cross table with T-slots Rjdpfx Aljxaagno Ijt Scope of delivery - 3-axis digital display ES-12 H with LCD display - Drawbar spindle M16 - LED machine light - Feed for x, y and z axes - Coolant system - Counter bearing - Long milling arbor ISO 40 / 27 mm - Combined milling arbor ISO 40 / 27 mm - Coolant tray - Adjustable protective device - Central lubrication for x, y and z axes - Operating tool

Condition: good (used), Year of construction: 2016, functionality: fully functional, Used Durma CNC press brake Type: AD Servo 30175 Capacity: 3050 x 175 tons Cybelec ModEva 15T CNC control CNC-controlled Y1, Y2, X and R axes CNC crowning Rjdpfx Ajx Iflzjl Ist Akas Fiessler laser safety Includes tooling set

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,600 mm, total height: 1,600 mm, total width: 1,000 mm, overall weight: 1,500 kg, input voltage: 400 V, Metal Technics Polska Professional CNC machines, lasers, and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe, and Asia—used by hundreds of companies across Europe. For 15 years, we have focused on quality, precision, and reliability. HYDRAULIC PRESS BRAKE 1320x40 MM Touchscreen control + SERVO The press brake is used for sheet metal forming. During the ram cycle, the sheet can be bent to match the required geometric profile. The machine can be used in many industries, including electromechanical, light industry, agricultural machinery production, shipbuilding, automotive, and aerospace industries. Technical Data: Nominal force: 400 kN (40 tons) Working table length: 1320 mm Distance between columns: 900 mm Throat depth: 180 mm Ram stroke: 100 mm Daylight: 290 mm Back gauge range: 500 mm Approach speed: 80 mm/s Working speed: 9 mm/s Return speed: 80 mm/s Main motor power: 4 kW Dimensions: 1500 × 1300 × 1600 mm AMADA Tool Clamping System: Each press is equipped with a quick and safe tool clamping system. The Amada-Promecam system is a reliable manual technology that allows fast tool insertion without additional tools. Rsdpfxjyr N E Eo Al Ijt Control System MTP 3212: Modern controllers combining ease of use with advanced programming capabilities. Touchscreen interface Automatic bending angle calculation Storage of thousands of programs Functions: Manual programming (no visualization) Tool library and editing SD card memory Crowning correction: YES Angle correction: YES Axis correction: YES Safety: Side guards – protection against accidental contact Light curtains – stop the machine when intrusion is detected Rear safety zone – prevents access from the back Delivery available. Transport cost quoted individually.

Condition: good (used), S151347 AC Servo Pack PT-R8xxx (SGDB-20AD-Y193) second-hand, tested Rjdpfx Alsyitc Ae Ijt All offers are subject to prior sale

Condition: new, Year of construction: 2026, neu 2026 080198 Mai 2026, Zwischenverkauf Türkei 106178 € 1806.84 € 95600 € 175 to 3050 mm Y1 / Y2 / X / R Achse 265 mm 2600 mm 410 mm 530 mm hydraulisch Rjdpfjwirtbox Al Ijt 200 mm/s 10 mm/s 200 mm/s 650 mm 500 mm/s 250 mm 900 mm 104 mm 2 x 4 kW 4250 mm 1700 mm 2750 mm 10900 kg 1 SERVO MOTOR AND PUMP PER CYLINDER Standard accessories: 4 axes (Y1, Y2,X and R) Color graphics control Delem DA 66 S - 2D graphical touch screen programming mode - 3D machine representation, in simulation and production - 24" high resolution color TFT - Delem Modusys compatibility (module scalability and adaptivity) - USB, peripheral interfacing - User specific application support within the control's multitasking environment - Sensor bending & correction interface - Profile-S2D offline software servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed OPTIONAL EQUIPMENT (TIME OF DELIVERY WITH THESE OPTIONS 16 WEEKS): CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Further options as pneumatic or hydraulic tool clamping on request.

Condition: ready for operation (used), Fanuc A06B-0146-B077 AC servo motor Serial number: C988A7708 / 3.0 kW 100 Hz Speed 1500 rpm, used, in good condition, 100% functional, scope of delivery as per photos. Rsdpfx Ajx Ncaljl Iet

Condition: ready for operation (used), Fanuc A06B-0146-B077 AC servo motor, serial number: C985A6505 / 3.0 kW 100 Hz, 1500 rpm, used, in good condition, 100% functional, scope of delivery as per photos. Redpfsx Ncafex Al Ijt

Condition: ready for operation (used), Fanuc A06B-0033-B675 AC servo motor, serial number: C049P1721, used, in good condition, 100% fully functional, scope of delivery as shown in the photos. Rsdpfxsx Ip Dns Al Iet

Condition: ready for operation (used), Fanuc A06B-0033-B675 AC servo motor, serial number: C153MA017, used, in good condition, 100% functional, scope of delivery as shown in the photos. Rsdpfx Ajx Ip Dusl Iot

Condition: ready for operation (used), Fanuc A06B-0034-B575 AC servo motor, serial number: C03YP2518, used, in good condition, 100% functional, scope of delivery as per photos. Rodpfx Aljx Ip Dzs Iot

Condition: ready for operation (used), Fanuc A06B-0123-B075 #7000 SN: 278697 AC servo motor, used, normal signs of wear, 100% fully functional, scope of delivery as per photos. Rodpfxsx Ip Ere Al Iet

Condition: ready for operation (used), Fanuc A06B-0313-B001 SN: G-894370 AC servo motor, used, in good condition, 100% fully functional, delivery as per photos. Rjdpsx Ip Hijfx Al Ijt

Condition: ready for operation (used), Fanuc A06B-0373-B569 #0008 AC Servo Motor SN:C13ZM0273 + A860-0346-T041 Pulsecoder, used, good condition, 100% functional, scope of delivery as shown in the photos. Rodpfx Alex Ip Hvj Iet

Condition: ready for operation (used), Fanuc A06B-0373-B569#0008 AC servo motor, serial number C166M11E1 + A860-2020-TT041 pulsecoder, serial number EE, used, in good condition, 100% functional, scope of delivery as shown in the photos. Rodpex Ip H Ajfx Al Ijt

Condition: ready for operation (used), Fanuc A06B-0063-B003 AC servo motor, serial number C196F1BB6 + pulsecoder, used, normal signs of wear, 100% functional, delivery as shown in photos. Redpfx Ajx Ip Efsl Ijt