Used Sick Icr845-2E1020 for sale (192)

Condition: used, Year of construction: 2006, pressure 135 t chamfer lenght 2550 mm distance between columns 2050 mm control CYBELEC ModEva 10 S dayligth 570 (EHT) mm total power requirement 25 kW weight of the machine ca. 11.000 kg Machine: - Sturdy machine frame constructed as a fully welded all-steel structure - Pressure beam with high bending strength - Electrohydraulic top drive via proportional valves - Modern block hydraulic system Optional equipment: - Increase in installation height and stroke by 150 mm each - Backgauge system 2 - 2 axes, R-axis adjustment 150 mm - 2 x additional stop fingers 2/4-axes, however, offset by 20 mm - CNC holding device - Distance from the bending line to the holding device approx. 240 mm - EHT quick-clamping device for EHT upper tools, pneumatic, head width 26 mm, horizontally self-centering - EHT lower tool clamping, mounting width 55 mm, pneumatic - Hardened insert strip for EHT lower tool clamping 55 mm / 90 mm - Die shift CNC-controlled, infinitely variable - CNC crowning device in the table (table width min. 110 mm) without tool clamping - SICK V4000 safety device - 2 x bending aids, max. 1500 N - 2 x 2 support rails for bending aid with 14 mm T-slot and scale - 2 x table extensions for bending aid Laodpfx Aey D T S Isifjd - Parking position on right and left, short

Condition: new, Year of construction: 2026, neu 2026 070236 September 2026, Zwischenv Türkei 6900 € 133.17 € 500 kg 1200 mm 400 mm Lsdpfswirmusx Aifjad 550 mm 300 mm 80 mm 1450 mm 1200 mm 1640 mm 260 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control PNEUMATIC PRESSURE ARM ALTERNATIVES (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: ready for operation (used), Year of construction: 2008, power: 11 kW (14.96 HP), stroke length: 180 mm, throat depth: 335 mm, Equipment: CE marking, Hydraulic press brake Manufacturer: DURMA, Type: E-30120 Year of manufacture: 2008 Technical data: Manufacturer: Durma Type: E-30120 Year of manufacture: 2008 Press force: 120t Working length: 3050 mm Stroke of upper beam: 180 mm Throat depth: 335 mm Distance between uprights: 2550 mm Dimensions: approx. 3.25 x 2 x 2.65 m Lajdpfxszbixkj Aifod Connected power: 11 kW Weight: approx. 7,400 kg Equipment: • Amada tool clamping system • Durma DU 6000 control system • Sick C-4000 safety device • CNC-controlled crowning • Controlled axes: Y1, Y2, X • R axis + Z axes manually adjustable • 2 support arms, laterally adjustable • Tool package Upper die, straight, segmented approx. 3300 mm, R0.8 75° Upper die, bent, approx. 3300 mm segmented Lower die, 4-way block: V16, V20, V35, V50 All information without guarantee. The machine comes from the workshop of a Hamburg film studio. A demonstration with power supply is possible at any time.

Condition: new, Year of construction: 2026, neu 2026 070234 September 2026, Zwischenv Türkei 4800 € 500 kg 1200 mm 400 mm 550 mm 300 mm 50 mm 80 mm 0.55 kW 1400 mm 1200 mm 1550 mm 190 kg Ljdpjwirz Sefx Aifoad motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control ALTERNATIVES (prices on request): Version with pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: ready for operation (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: R201204B9, overall weight: 252 kg, Equipment: safety light barrier, TECHNICAL DETAILS Control Control model: A05B-2611-B382 Control serial number: E20110087 Gripper Design: Vacuum gripper Drive: Single zone MACHINE DETAILS Total weight: 252 kg Operating hours: approx. 1,000 h Lsdsy Hiy Topfx Aifoad EQUIPMENT Safety enclosure with Allen Bradley PLC Sick laser scanners, 2 units Light barriers, 4 units

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 10,500 mm, construction height: 4,730 mm, operating hours: 1,844 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 308 Mast: L + i - 3F10500 ID: 24033.5995 Category: Used Mast: 3F Lowered height: 4730 mm Lifting height: 10500 mm Capacity: 1000 kg Platform height: 10500 mm Picking height: 12100 mm Cabin width: 1500 mm Year: 2018 Hours: 1844 hours Capacity: Complete NEW 48 V / 620 Ah - Year of manufacture 2026 Lsdpfx Aozafqtoifsad Options: - Mast Triplex - FFL - PSA (Sick) - Induction / Wire Guidance In complete LIKE NEW condition.

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 10,500 mm, construction height: 4,730 mm, operating hours: 1,201 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 308 Laodpfxozafqms Aifod Mast: L + i - 3F10500 ID: 24033.5993 Category: Demo Mast: 3F Lowered height: 4730 mm Lifting height: 10500 mm Capacity: 1000 kg Platform height: 10500 mm Picking height: 12100 mm Cabin width: 1500 mm Year: 2018 Hours: 1201 hours Capacity: Complete NEW 48 V / 620 Ah - Year of manufacture 2026 Options: - Mast Triplex - FFL - PSA (Sick) - Induction / Wire Guidance In complete LIKE NEW condition

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 10,500 mm, construction height: 4,730 mm, operating hours: 1,629 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 308 Mast: L + i - 3F10500 ID: 23123.5000 Category: Used Mast: 3F Lowered height: 4730 mm Lifting height: 10500 mm Capacity: 1000 kg Lajdezafpcspfx Aifod Platform height: 10500 mm Picking height: 12100 mm Cabin width: 1500 mm Year: 2018 Hours: 1629 hours Capacity: Complete NEW 48 V / 620 Ah - Year of manufacture: 2026 Options: - Mast Triplex - FFL - PSA (Sick) - Induction / Wire Guidance – complete, LIKE NEW!!

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 5,075 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.0175 Category: Used Mast: 3F Lowered height: 3900 mm Laodpfjzafn Sox Aifsd Lifting height: 9450 mm Capacity: 1200 kg Platform height: 8900 mm Picking height: 10500 mm Initial lift: Yes Cabin width: 1200 mm Year: 2015 Hours: 5075 h Battery capacity: 48V / 620Ah – Year 2021 Options: FULLY equipped!! – Triplex mast – FFL – SAFETY doors with TILT FUNCTION!! – Adjustable forks! – PSA (Sick) – Induction / Wire Guidance – End position sensors on mast Condition: LIKE NEW!!!

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 4,059 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.0180 Category: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Platform height: 8900 mm Picking height: 10500 mm Initial lift: Yes Cabin width: 1200 mm Year: 2015 Hours: 4059 hours Battery: 48 V / 620 Ah - Year 2021 Lsdpezafn Esfx Aifjad Options: FULL options!! - Triplex mast - FFL - Safety doors with tilt function!! - Adjustable forks! - PSA (Sick) - Induction / wire guidance - End position sensors on the mast Machine LIKE NEW!

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 3,483 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.016 Category: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Picking height: 10500 mm Initial lift: Yes Cabin width: 1200 mm Year: 2015 Operating hours: 3483 hours Battery capacity: 48 V / 620 Ah - Year 2021 Laedpfxszafnxj Aifsd Options: FULLY equipped!! - Triplex mast - FFL - SAFETY doors with TILT FUNCTION!! - Adjustable forks! - PSA ( Sick ) - Induction / wire guidance - End position sensors on mast Complete LIKE NEW!!!

Condition: good (used), Year of construction: 2006, Press force: 135 t Bending length: 2550 mm Frame gap: 2050 mm Control system: CYBELEC ModEva 10 S Ljdpfx Aisy H Ilbsfsad Total power requirement: 25 kW Machine weight approx.: 11,000 kg Description Machine: – Rigid machine frame as an all-steel welded construction – Ram with high flexural rigidity – Electrohydraulic top drive via proportional valves – Modern block hydraulics Special equipment: – Increased installation height and stroke by 150 mm each – Rear gauge system 2 – 2 axes, R axis adjustment 150 mm – 2 x additional backgauge fingers 2/4 axes, however offset by 20 mm – CNC sheet support device – Distance from bending line to sheet support device approx. 240 mm – EHT quick-release clamping system for EHT upper tools, pneumatic, head width 26 mm, horizontally self-centering – EHT lower tool clamping, receiving width 55 mm, pneumatic – Hardened insert strip for EHT lower tool clamping 55 mm / 90 mm – CNC-controlled die shifting, stepless – CNC crowning system in the table (minimum table width 110 mm), without tool clamping – Safety device SICK V4000 – 2 x bending aids max. 1500 N – 2 x 2 support rails for bending aid with 14 mm T-slot and scale – 2 x table extensions for bending aid – Park position right and left, short

Year of construction: 2025, condition: new, Hydraulic C-frame press (punch press) Year of manufacture: 2025 Capacity: 100 tons at 230 bar Control / key switch: 1. Manual setup mode without light sensor 2. Automatic (at full speed) with light sensor Main cylinder: Ø 230 mm Auxiliary cylinders: 2 x Ø 50 x 30 mm Auxiliary guide: 2 x Ø 50 mm Motor: 11 kW – 15 hp Pump: 16 cc – 23 liters / ASC – Helical gear pump Speed: Forward 110 mm/sec – Return 200 mm/sec Pressure phase: 9 mm/sec Lsdpfx Aiowag Riefsad Installation height: 500 mm Stroke length: 400 mm. Push plate: 750 x 600 mm. – with T-slots Table top: 750 x 600 mm. – with T-slots Table height: 850 mm. (Floor to table top edge) ----- Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC. (20 – 100 tons) Speed adjustable via PLC. Air cooler Feed valve NG.63 Control accessories: Siemens S7-1200 Blsbjftg Sgsmmvyhwof Main control box Foldable control panel With side safety door (doors can be moved backwards) SICK 750 + 150 mm light sensors. Ruler for adjusting the stroke length 7" PLC screen – Siemens Movable two-hand control Alarm indicator for faults (light & sound) ----- • The press complies with the EN693 Machinery Directive • Hydraulic two-way valves • Dual-channel fused control system • Safety PLC – SICK • Operating instructions & parts list (German) • Warranty: 24 months ----- Oil capacity: 190 liters (Tank volume: 205 liters) Total weight: approx. 5,500 kg. Overall dimensions: 1300 x 2000 x 2750 mm. Delivery time: 2 - 3 weeks from stock. Paint finish: Light gray & dark gray The machine is available immediately in 2 - 3 weeks. Freight: approx. €2,000 from Konya to Germany

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) * Lasdpfx Aiju Nfmyefed

Condition: used, Year of construction: 2012, Technical details: y-travel: 1500 mm distance between columns: 2300 (Brücke) mm Beam Hour: ca. 22000 h Lsdpfou Nu R Ijx Aifead laser capacity: 6000 W control: CNC P 8109-10-600D table length: 4500 / Auflage: mm Table width: 2300 mm operating pressure: 120hPa Waterpressure - requiered: max. 6,0 bar voltage: 400 / 50 V / Hz dimension laser device LxWxH: ca. L: 3,0 x B: 1,5 m dimension filtering system LxWxH: ca. 1,4 x 2,0 x 2,2 m dimension coolant device LxWxH: ca. 2,55 x 1,0 x 1,9 m space requirements of the machine approx.: gesamt: ca. 12,8 x 5,3 x 4,3 m Flatbed laser cutting machine Application: ind. Cutting and engraving Laser medium Co²; N²; compressed air Sheet dimensions/format 3000x 1500mm Cutting thickness: e.g. steel X5CrNi18-10 = 1 - 25mm / CNS 25mm / aluminum: 1 - 15mm (Tabb. available) Resonator - laser source ByLaser 6000W, wavelength 10.600mm, beamØ 20mm, circular polisariation Shuttle table LxWxH: 4500 x 2300 x 1000mm, load capacity 900kg, table support surface = 3200 x 2000mm Rf cooling type WKL 560, refrigerant R 407C, cooling capacity 65kW, high pressure 27bar, pump 220 l/min, fan Dedusting system, Donaldson type DFPRO6 (size approx. 1.4 x 2.0 x 2.2m) Cross conveyor by Kabelschlepp type SRF 040 (size LxW.H: approx. 3630 x 705 x 1000mm) Light barrier Sick type M 4000 Cutting bridge: Y-path 3000mm, stand width 2300mm, cutting carriage size LxWxH: 400 x 300 x 650mm Operating terminal with complete cabinet combination and manual control unit Cut Control *

Year of construction: 1997, condition: used, Technical details: pressure: 250 t stroke: ca. 400 mm pass through width: 640 mm table above floor: 900 mm ram stroke speed: regulierbar/adjustable passage between the side columns: 470 mm table clamping surface LxW: 570x550 mm clamping area of ram: 570x550 mm total power requirement: 56 kW weight of the machine ca.: ca. 9,0 t dimension machine xH: 2,5x1,8x3,8 m transport dimensions LxWxH: 2,6x1,8x3,1 m - control manual and via automatic via SPS Allen Bradley - one hand and two hand control - ram guidance column, zero backlash - set up mode and automatic mode via SPS controlled - light curtain type "Sick" and safety curtains installed - no CE certification available i.D. Lasdpfxsu Nfn Rj Aifod *

Condition: new, pressing force: 280 t, 280 t servo double-column heated press with heating plates We can offer you this press at a particularly attractive price, as the machine is already under construction and the original customer has cancelled an order for two identical machines. This gives you the opportunity to purchase a high-quality servo-hydraulic double-column press with heating plates under favorable conditions and with comparatively short lead times. The photos shown depict similar, previously built machines from the factory and are for reference purposes only. Technical data & information: ==== General information Press force: 280 t Design: servo double-column heated press Main cylinder: 1 Auxiliary cylinders: 2 Guidance: 4-column guides Clear width between uprights: 1,250 mm Cylinder stroke: 600 mm Max. distance between heating plates: 800 mm Table height from floor incl. damping plates and heating plate: 900 mm Overall height approx.: 3,500 mm Width incl. control cabinet approx.: 2,200 mm Depth approx.: 1,200 mm Weight approx.: 13,000 kg ==== Table & Ram Fixed lower table with T-slots: 1,250 × 800 mm Ram with T-slots: 700 × 800 mm Heating plate: 600 × 600 × 80 mm ==== Speeds Approach speed: 100 mm/sec Working speed: 10 mm/sec Return speed: 100 mm/sec ==== Hydraulics & Drive/Electrics Hydraulic power unit: Duplomatic Hydraulic pump: Rexroth / Baumüller / Servo Pump capacity: 72 l/min Motor power: 10 kW Servo hydraulics: included Control: Siemens S7-1200 with Siemens MTP 1000 touchscreen display Programming: up to 50 programs Travel measurement: encoder Pressure measurement: data recording ==== Equipment Digital control for stroke, pressure, speed, and changeover positions Passive pressure-holding function for up to 15 minutes Electrically heated plates up to 250 °C Heating capacity: 24 kW Temperature monitoring and heating element control via monitor Piece counter Alarm management Downward accuracy: 0.1 mm Stroke limitation via Leuze measuring rod and monitor Two-hand operation Ram return via operating button Light curtain protection front and rear up to 2,500 mm height CE certificate and user manual included Control cabinet with Siemens components Safety systems by Sick / Pilz / Keyence / Datalogic ==== Additional included features 40 mm thick base plate with chamfered ramp Lsdpsyynaljfx Aifead 4 vibration damping plates Energy-saving servo hydraulics Applications: Heated presses, compression molding presses, presses with temperature-controlled processes, plastics processing, composite materials, technical molded parts, lamination processes, industrial special applications Hydraulic press, servo-hydraulic press, servo press, double-column press, heated press, servo double-column press, compression molding press, press with heating plates, industrial machine, special machine, tool adjustment press, tryout press, tool try out press.

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: Laodjk S Dt Tspfx Aifjd HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: new, pressing force: 1,100 t, 1100 t Servo Double-Column Heated Press with Heating Plates We can offer you this press at a particularly attractive price, as the machine is already under construction and the original customer has cancelled their order for two identical units. This provides an opportunity to purchase a high-quality servo-hydraulic double-column press with heating plates under attractive terms and with comparatively short delivery times. The photos shown display similar, already completed machines from the factory and are for reference purposes only. Technical Data & Information: ==== General Specifications Press force: 1,100 t Design: Servo Double-Column Heated Press Main cylinder: 1 Auxiliary cylinders: 2 Guidance: 4-column guides (Ø 150 mm) Clear opening between columns: 1,600 mm Cylinder stroke: 600 mm Max. distance between heating plates: 800 mm Table height from floor incl. shock absorber and heating plate: 1,000 mm Overall height approx.: 4,600 mm Width incl. control cabinet approx.: 3,250 mm Depth approx.: 1,700 mm Weight approx.: 41,000 kg ==== Table & Ram Lower fixed table with T-slots: 1,600 × 1,100 mm Ram with T-slots: 1,500 × 1,100 mm Heating plate: 1,100 × 1,100 × 140 mm ==== Speeds Approach speed: 100 mm/sec Working speed: 10 mm/sec Return speed: 100 mm/sec ==== Hydraulics & Drive/Electrics Hydraulic unit: Duplomatic Hydraulic pump: Bosch Rexroth / Baumüller / Servo Pump capacity: 240 l/min Motor power: 32 kW Servo hydraulics: included Control system: Siemens S7-1200 with Siemens MTP 1000 touchscreen display Programming: up to 50 programs Position measurement: encoder Pressure measurement: digital data acquisition ==== Equipment Digital control for stroke, pressure, speed, and changeover positions Passive pressure holding up to 15 minutes Electrically heated plates up to 250 °C Heating power: 60 kW Temperature monitoring and heating rod monitoring via monitor Piece counter Alarm management Downstroke accuracy: 0.1 mm Travel limitation via Leuze measurement rod and monitor Two-hand operation Ram return via control button Lasdpoyyna Sefx Aifsd Light curtain safety front and rear up to 1,900 mm height CE certificate and user manual included Control cabinet with Siemens components Safety systems from Sick / Pilz / Keyence / Datalogic ==== Additional Included Features 40 mm thick base plate with chamfered ramp 4 vibration damping pads Energy-saving servo hydraulics Applications: Heated presses, compression moulding presses, presses with temperature-controlled processes, plastics processing, composite materials, technical moulded parts, lamination processes, industrial large-scale production, special purpose machinery manufacturing Hydraulic press, servo-hydraulic press, servo press, double-column press, heated press, servo double-column press, compression moulding press, press with heating plates, industrial machinery, special-purpose machine, tool trial press, tryout press, tool try out press

Condition: like new (used), Year of construction: 2023, functionality: fully functional, table width: 1,500 mm, table length: 1,000 mm, ram plate width: 1,500 mm, reverse speed: 10 mm/s, ram plate length: 1,000 mm, travel distance X-axis: 1,200 mm, type of input current: AC, pressing force: 40 t, power: 9 kW (12.24 HP), Equipment: safety light barrier, Spotting Press – Manufacturer Hidrobrasil – 40 t Sliding Table Press – Table 1,500 × 1,000 mm For sale is a hydraulic spotting press from Hidrobrasil with a pressing force of 40 t. The machine is designed as a tool opener/closer and features an extendable table, a rotatable ram, and a large installation height of 1,800 mm. It is particularly suitable for spotting, adjustment, and tryout operations with heated dies. ===== Technical Data + Information: Spotting Press Hidrobrasil – 40 t Sliding Table Press ==== General Information - Manufacturer: Hidrobrasil - Model: Spotting Press - Design: Sliding Table Press / Die Opener-Closer - Pressing force: 40 t - Machine weight: approx. 13 t - Overall height: approx. 3,800 mm ==== Working Area - Maximum open height: 1,800 mm - Ram stroke: 1,500 mm ==== Table and Ram - Table size: 1,500 × 1,000 mm - Ram size: 1,500 × 1,000 mm - Ram rotatable: 180° - T-slots: according to customer specification ==== Table System - Table extension: 1,200 mm - Table travel speed: 30 mm/s ==== Forces - Pressure adjustment: 10 – 40 t ==== Hydraulics - Oil temperature monitoring with electric air cooling - Hydraulic components: Bosch Rexroth, Parker, Atos - Lubrication: manual ==== Control and Operation - Siemens control system - Monitor: 10" in control cabinet - Pressure adjustment and warning notifications via display Ljdpfx Ajtwmp Ssifead - Two-hand operation - Remote maintenance unit (Secomea Ethernet) ==== Safety - Safety components by SICK ==== Equipment - Insulation of the clamping plates (resin insulating plate + ventilation plate) - Custom color design as requested by customer - EU-compliant design ==== Operating Conditions - Maximum ambient temperature: 40 °C ===== Spotting, die adjustment, tool tryout, mould making, toolmaking, tryout operations, adjustment processes, heated dies Spotting press, tool tryout press, sliding table press, die opener, tryout press, tool adjustment press, tool try out press, tryout press, hydraulic press Looking for a hydraulic press tailored to your application? Contact us for a custom quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with all points of the Brazilian national safety regulation NR 12, which is based on these standards. Our core competencies include custom machine building and automation of presses. We supply tailor-made hydraulic presses at surprisingly competitive prices. The hydraulics in our presses primarily feature components from leading European manufacturers.

Condition: as good as new (ex-display), Year of construction: 2016, pressing force: 40 t, We offer an immediately available Hydraulic spotting press with 40 tons pressure. Due to a change of warehouse location, this press is offered at a very competitive price. Pressure 40 t Table length 1000 mm table width 700 mm Lodpfx Aiehtm E Nefsad Machine weight approx. 9 t space requirement approx. 4000 x 4400 x 1800 mm stroke length 1050 mm installation height 1200 mm table rotatable 180 degrees table load max. 5 t forward speed 100 mm/sec return speed 100 mm/sec working speed adjustable from 0 to 10 mm/sec. Main cylinder 1 piece table extendable for 1050 mm table tiltable 50 degrees upper tool tiltable 180 degrees Traversing speed of the table 25 mm/sec Pressure, travel and speed adjustable via monitor- control adjustable robust machine body with solid welded construction, manufactured according to DIN 8651 low maintenance and reliable due to robust technology maintenance balcony with marine ladder entire range of motion secured by Sick light barriers Table moves out of the machine to the front and straightens up by 45 degrees on request. Control cabinet to the left of the machine Monitor control with 200 memory locations REMOTE function for remote maintenance Operating manual, technical documents, documentation in German language CE certificate monitor SIEMENS 9" Motors from WEG Hydraulics from Bosch Rexroth Interior lighting Operator panel on swivel arm Two-hand operation on movable stand USB interface for data transfer Siemens control system Light sensors Sick 1250 mm ram plate can be folded down hydraulically, moves up to approx. 175 degrees Columns and cylinders are made of SAE 1045 tool steel (identical to German standard C 45) and are induction hardened and chrome plated on the outside. The linear measuring rod informs the control system of the position of the ram in each case. The travel distance, the upper stop point and the changeover point at which the press is to switch from idle to working speed, as well as the end position to be approached, can be entered easily and quickly via the monitor control. The working speed can be set in 1 mm/sec increments from 0 to 10 sec and in 10 mm increments from 10 to 155 mm. The control monitors the secured areas, all hydraulics and the pump. The control system is housed in a separate control cabinet. The actual press operation is carried out via a control panel mounted on a swivel arm, which reduces the distances involved.

Condition: new, pressing force: 200 t, DURENDUS 200 T Deep Drawing Press – Double Column Press – 900 × 900 mm Table, 80 T Drawing Cushion The machine shown here was already built and delivered to a customer's order. We can manufacture a new machine of this model for you at short notice – including individual options tailored to your requirements. This is a hydraulic deep drawing press with integrated drawing cushion function designed for forming processes, drawing operations, and precise sheet metal processing. Base price: €76,000 net Options (upon request): The options listed are based on completed customer projects and allow targeted adaptation of the machine to your specific application. The basic version offers a functional standard configuration – in practice, it is usually enhanced with additional features and specifically configured to project requirements. * T-slots and holes to customer specification * Adaptation of stroke, installation height, and press force range * Extended drawing cushion configuration * Customized control modifications * Enhanced safety and monitoring systems ==== Technical Data + Information: ==== General Information * Design: Double column press * Press force: 40–200 t (adjustable) * Total weight: approx. 5,500 kg * Overall dimensions (W × D × H): 2,370 × 1,300 × 3,300 mm ==== Working Area * Table size: 900 × 900 mm * Ram area: 900 × 900 mm * Installation height: max. 800 mm ==== Table & Ram * Table height: 1,000 mm * Ram stroke: 0–500 mm (adjustable) * Column guide: 4 columns Ø 120 mm ==== Speeds * Pressing speed: 4–10 mm/s * Idle speed: 10 mm/s * Return speed: 16 mm/s * Drawing cushion speed: 20 mm/s ==== Hydraulics & Drive * Operating pressure: max. 260 bar * Pump capacity: 70 l/min * Servo motor power: 15 kW * Pressure accuracy: ±5 bar * Hydraulic system with air cooling and oil monitoring ==== Control & Operation * Two-hand operation * Mode selector switch (key switch) * Modes: setup, manual cycle * Electrical connection: 400 V / 50 Hz * Total connected load: approx. 20 kW ==== Equipment * Drawing cushion: 30–80 t, stroke 200 mm * CE-compliant design * Safety limit switches * Hydraulic interlock * Control cabinet IP54 with brand components (SIEMENS, ALLEN BRADLEY, SICK) * Two-layer coating according to RAL colors ===== Deep drawing, sheet metal forming, forming technology, manufacture of drawn parts, series production, metalworking Laedpfx Aoyzf A Hoifod Deep drawing press, hydraulic press, double column press, drawing cushion press, forming press, sheet metal processing press Are you looking for a hydraulic press tailored to your application? Contact us for an individualized quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 32 A, type of input current: three-phase, pressing force: 20 t, total length: 2,400 mm, total width: 1,500 mm, total height: 2,400 mm, overall weight: 2,000 kg, ambient temperature (min.): 10 °C, ambient temperature (max.): 40 °C, control cabinet length: 60 mm, control cabinet width: 80 mm, height adjustment type: hydraulic, Equipment: documentation/manual, Hidrobrasil Tablet Press – 20 t – C-Frame – Manual Loading Press For sale is a hydraulic single-column press (C-frame) from Hidrobrasil with a pressing force of 20 t, specifically designed for applications in the pharmaceutical and chemical industries. The machine is ideally suited for the production of tablets, as well as for precise pressing and forming tasks in smaller batch production and laboratory applications. ==== Technical Data & Information: Hydraulic Tablet Press – 20 t ==== General Information - Manufacturer: Hidrobrasil - Model: Single-Column Press - Machine type: Tablet Press - Design: C-Frame / Single-Column Press - Year of manufacture: 2023 - Location: Gelsenkirchen, Germany - Pressing force: max. 20 t - Machine weight: approx. 2 t - Total height: approx. 2,400 mm ==== Working Area - Max. opening width: 500 mm - Stroke / min. opening: 400 / 100 mm - Table height above floor: 800 mm ==== Speeds - Rapid closing: 120 mm/sec Lodpfstv Ewdsx Aifead - Pressing speed: 5–10 mm/sec ==== Hydraulics & Drive - Operating pressure: max. 250 bar - Pressure accuracy: ±5 bar - Main pump: Gear pump, approx. 10 l/min - Oil volume: approx. 150 l (HLP 46) - Main motor: 22 kW - Total connected load: approx. 6 kW ==== Precision & Stability - Parallelism deviation: ±0.1 mm at 20 °C - Deflection: max. 0.3 mm/m ==== Control & Safety - Control voltage: 24 V DC - Light barriers: SICK / Pilz / Schmersal - Two-hand control, optionally foot control - Safety design complies with EU standards and UVV ==== Equipment - Table top designed as a tray with 50 mm edge and drain - Position adjustment via sensors - Pressure adjustment: 5–20 t via rotary control - Control cabinet mounted on the right, protection class IP54 ==== Production & Features - Multi-tool: 8 pressing cylinders - Output: approx. 8–12 parts per minute - Hydraulic unit fully removable for maintenance ===== Tablet production, pharmaceutical industry, chemical applications, laboratory presses, small batch manufacturing Hydraulic press, tablet press, single-column press, C-frame press, pharma press, laboratory press Are you looking for a hydraulic press tailored to your specific application? Contact us for a customized quote. Our hydraulic presses are manufactured according to German and European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they comply with all aspects of the Brazilian national safety directive NR 12, which is based on these standards. Our main strength is custom machine building and press automation. We offer bespoke hydraulic presses at surprisingly affordable prices. We primarily use components from leading European manufacturers for the hydraulic systems of our presses.

Condition: used, Year of construction: 1982, pressure 40 t distance between columns 695 bzw. 215 mm stroke 100 mm table surface area 650 x 440 mm ram surface 580 x 285 mm dayligth 400 mm total power requirement 15 kW weight of the machine ca. t Lsdpfxjtqqq Rs Aifead dimensions of machine L x W x H 1,63 x 1,05 x 2,61 m - with die cushion - with light bareer make SICK

Year of construction: 1998, condition: good (used), AMADA PROMECAM ITS2 2512 CNC PRESS BRAKE MAKE AMADA PROMECAM, MADE IN FRANCE MODEL ITS2 2512 YEAR 1998 CONTROL OPERATEUR 2 TONNAGE 25 TONS LENGTH 1250.0 mm NO OF AXES 4 AXIS CNC GUARDING SICK OPERATOR LIGHT GUARD TOOLING FULL SET OF CLAMPS PLUS UPSTROKING HYDRAULIC PRESS BRAKE Ledpfx Aepz Igijifead FOOT CONTROL PENDANT FULL SET OF MANUALS FULL SET OF CLAMPS SET OF TOP AND BOTTOM TOOLING