Used Side Channel Compressor for sale (24,479)

Condition: good (used), mileage: 542,139 km, power: 338 kW (459.55 HP), first registration: 10/2018, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2018, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, navigation system, parking heater, power mirror, soot filter, spoiler, - Aluminum fuel tank - Brake booster - Roof spoiler - EPS - Low noise - Particle filter - Radio/CD player - Sleeper cab - Side door - Auxiliary heater - Toolbox Front axle: Steered; Suspension: Leaf suspension Rear axle 1: Lift axle; Suspension: Air suspension Rear axle 2: Suspension: Air suspension Unladen weight: 8,472 kg Payload: 17,528 kg GVW: 26,000 kg APK (Technical Inspection): Valid until 08/2027 Technical condition: Good Optical condition: Good Vehicle number: 131 MAN 26.460 TGX / 6x2 / Lift axle / Euro 6 .: WMA24XZZ2KP114005 Transmission: Automatic Suspension: Leaf / Air Air conditioning Engine brake Cruise control Navigation system Distance assist Lane keeping assist Auxiliary heater Lift axle Emission standard EURO 6 Special equipment: Front axle load 8.0 t, Exterior mirrors and wide-angle mirrors, electrically adjustable and heated, Battery 225 Ah, Battery disconnect switch, mechanical, Curb mirror right electrically adjustable and heated, Roof antenna CB radio, Differential lock rear axle, ETA fuse, Driver's seat comfort, air-suspended and heated, with lumbar support and shoulder adjustment, Lever-operated - brake EVBec controlled, Air compressor 2-cylinder 720 ccm, Air dryer heated, Auxiliary air heater Eberspächer D4S, Fifth wheel coupling: Jost JSK SL 36, Bunk bed lower and upper with storage space, Sun visor external, Power socket cab 12V and 24V, Door extension for cab, Front axle VOK-09 curved, Additional long-range/fog lights with cornering light, Additional fuel filter heated with water separator Additional equipment: Axle configuration: 6x2, Ambient lighting, Approach/front mirror, Trailer socket 24V / 7-pole, Anti-slip control (ASR), Audio system: Radio MAN Media Truck Advanced 12V with navigation system preparation, On-board computer MAN-Tronic, Electronic braking system MAN-Brakematic, EURO 6 engine, Cab: with Nordic insulation, Cab: XLX, Bunk bed lower with storage space, Suspension: Leaf / Air, Window lift electric, Remote control central locking, Windshield tinted, Generator 28 V 80 A, Transmission 16-speed - Type: ZF 16 S, Lift roof mechanical, Body/Structure: Semi-trailer tractor, Lever-operated - brake EVB, Automatic climate control, Fuel filter heated, Steering wheel with multifunction, Air intake raised, Engine 12.4 Ltr. - 338 kW Diesel, Engine compartment encapsulation, Wheelbase 2600 mm, Disc brake rear axle, Disc brake front axle, Side windows rear tinted, Seat cover / upholstery: Comfort quality, Sun blind for windshield, Sun blind side window, Driver's door, Spray mist reduction, Stabilizer on one rear axle, Stabilizer front axle, Storage box accessible from outside, Control type cab, TGX, Door windows tinted, Underrun protection front, Viscous fan, Central locking, Permissible total weight 26.0 t No liability for printing and typesetting errors, changes, prior sale and errors reserved! No liability for printing and typesetting errors, changes, prior sale and errors reserved! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email. Fpjdpfozz Aygox Aaysl

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CMC 250 turbocode inserter for sale! 2014 the year of made Only 7 Million clics on meter! 16.000 envelopes /hr Fedpjzza H Rsfx Aayspl 60.000 A4 sheets/hr 2 rotary feeders with cameras Dual channel Pinless Hunkeler UW6 unwinder Tecnau cutters Tecnau waste exhausting system File based integrity system with Datalogic cams Address printing system Label attaching system See video and pictures!

Condition: good (used), mileage: 671,713 km, first registration: 08/2020, fuel type: diesel, tire size: 315/70 R22,5, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, differential lock, fog lights, fridge, power mirror, retarder, soot filter, spoiler, = Additional Options and Accessories = - 2 beds - Airflow system - Aluminum fuel tank - Roof spoiler - FCW (Forward Collision Warning) - Remote central locking - Speed limiter - LDWS (Lane Departure Warning System) - LED lighting - Alloy wheels - Adjustable steering wheel - Engine brake - PTO (Power Take-Off) - Sleeper cab - Side fender - Side skirts - Differential lock - Toolbox = Notes = Scania R410 Highline FCW + LDWS Auxiliary heater Auxiliary air conditioning Alcoa rims Auxiliary drive (PTO) Gardner-Denver compressor Toolbox = Further Information = General Information Number of doors: 2 Cab: Highline Fpodjzz St Aopfx Aayel Technical Information Number of cylinders: 6 Engine displacement: 12,742 cc Unladen weight: 7,771 kg GVWR (Gross Vehicle Weight Rating): 7,771 kg Transmission Transmission: Scania, 12 gears, automatic Axle Configuration Tire size: 315/70 R22.5 Axle brand: Anders Brakes: Disc brakes Front axle: Max. axle load: 7500 kg; Steered; Tire tread left: 50%; Tire tread right: 50%; Suspension: Parabolic suspension Rear axle: Dual tires; Differential lock; Max. axle load: 11500 kg; Tire tread left inner: 40%; Tire tread left outer: 40%; Tire tread right inner: 40%; Tire tread right outer: 40%; Suspension: Air suspension Performance Maximum speed: 90 km/h Interior Interior: gray Product Safety Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Condition: used, mileage: 399,000 km, power: 315 kW (428.28 HP), first registration: 04/2016, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: red, gearing type: automatic, emission class: euro6, loading space length: 5,800 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Year of construction: 2016, Equipment: ABS, air conditioning, had accident, * Mercedes Arocs 3243, 3-sided dump truck with Bordmatic * First registration 2016 * 399,000 km * Euro 6 * Automatic transmission * Leaf spring - leaf spring * 8 x 4 * Air conditioning * Meiller body: 5.80 x 2.38 x 1.00 m * Unladen weight: 14,215 kg * Payload: 17,750 kg * Wheelbase: 4.25 m * ENGINE FAILURE! Hole in the engine ---- Fodszuqynepfx Aayjpl Special equipment: Audio system: CD radio (Bluetooth), step with handrail on the roof, compressed air connection in the cab, compressed air horn, cab: steel-sprung, comfort, gearbox 12-speed - type: G 230-12, rear lights construction site version, rear axle bevel gear 233, hydraulic pump (Meiller pump - 9 pistons - 296 / 54), interior filter for construction site vehicles, fender ribbed aluminum, fuel tank: 320 liters aluminum, left, air intake from the front, engine brake reinforced, reversing warning sound (warning signal outside), interface fleet management system, seats in the cab: driver's seat, sprung seat comfort, sun visor outside, sun blind side window, driver's door, storage compartment outside left, socket 24V / 25 A in the front passenger footwell, road paver package, underrun protection rear foldable Additional equipment: Emission standard EURO 6, axle configuration: 8x4/4, axle load front axle 7.5 t, trailer coupling: towing coupling Ringfeder, Arocs, exterior mirrors electrically adjustable and heated, battery 170 Ah, batteries arranged one above the other, differential lock rear axle, compressed air tank steel, compressed air unit low, cab: width 2.30 m, cab: cab access movable, cab: tilting mechanism hydraulic, cab: M ClassicSpace, cab floor with engine tunnel 170 mm, cab: mounting height 600 mm, suspension: leaf spring / leaf spring, suspension: rear springs 2x10 t, hard, suspension: front springs 7.5 t, 3 leaves, power windows, windshield tinted, generator 100 A, urea tank (AdBlue): 25 liters, info display 10.4 cm, interior filter: pollen filter, body/superstructure: tipper, comfort locking system, steering pump unregulated, air compressor 2-stage, air dryer heated, engine 10.7 liters - 315 kW R6 diesel (OM 470), engine compartment encapsulation, auxiliary drive MB 131-2c, wheelbase 4250 mm, ramp mirrors, waste heat recovery, rear window, disc brakes with full protection, disc brakes front and rear axle, seat cover / upholstery: fabric, seats in the cab: front passenger functional seat, stabilizer rear axle, stabilizer front axle, tachograph / EG control unit, underrun protection rear fixed, preparation toll collection, front axle straight, water pump regulated, permissible gross weight 32.00 t, oil cooler transmission

Condition: used, Year of construction: 2008, functionality: limited functionality, power: 150 kW (203.94 HP), nominal heat output: 250 kW (339.91 HP), heating capacity: 220 kW (299.12 HP), Fixed-bed wood gasification plant from Urbas. The system is operational. Scope includes engine and generator. The engine requires an overhaul. Also included is a valid EEG feed-in contract at 21.6 cents/kWh until 2028. A comprehensive stock of spare parts, such as side channel blowers, sensors, and pumps, is included. A second unit is provided as a parts donor. Fedpfjyyzv Tjx Aayepl

Condition: used, -Reference: 7.2 / 84x214-4 -Oven dimensions (WxDxH): 1475x2780x2400 mm -Hearth size (WxD): 840x2140 mm -Baking surface: 7.2 m² -Serial No.: 1405116/BN/0010 -Temperature: 300°C -Electronic controls -Year: 2014 -4 decks -Voltage: 400V -Power: 43.5 kW -Weight: 3400 kg -High-efficiency combustion chambers -Combustion chamber with reinforced insulation -Large radiant surface across the three flue channels, ensuring rapid temperature recovery after loading -Flue channels fully lined with refractory material to improve temperature retention and heat resistance STEAM -Steam generator for each deck -Steam generators located on the right side inside each baking chamber -Electrovalve group for water supply mounted on the oven roof Fjdpfoy H Hykox Aayepl -STEAM EXHAUST -Individual steam exhaust for each baking chamber -Hood with steam extraction fan -Steam extractor with single speed -Manual steam exhaust valves ELECTRICAL INSTALLATION -Controls located on the left side -Electrical panel accessible from the front for easy maintenance -Lighting system with 1 lamp per deck positioned at the mouth, easily replaceable -Safety thermostat

Condition: not inspected (used), Year of construction: 2013, functionality: unexamined, working width: 330 mm, passage height: 120 mm, Infrared drying tunnel for profiled wood Manufacturer: Makor Type: FTC-IRE Year of manufacture: 2013 The Makor FTC I.R.E. paint drying tunnel is designed for the accelerated curing of paints and surface coatings using electric heating elements, which are applied to frame timbers, moldings, profiled wood, and generally all types of wood profiles. It can also be used for preheating the profiles before the painting process to improve the paint quality. Passage width approx. 330 mm Passage height approx. 120 mm Infrared heating elements from above and below Includes output conveyor belt, manufacturer: Makor Length 4000 mm, conveyor belt width 250 mm Connection value approx. 55 kW Dimensions: Drying tunnel approx. 5000 x 1400 x 1750 mm L x W x H Operator terminal approx. 1200 x 500 x 1100 mm L x W x H Additional output conveyor belt approx. 4000 x 600 mm L x W Fpjdpjzhap Esfx Aayel Total weight approx. 2200 kg

Condition: used, Year of construction: 2020, functionality: fully functional, product height (max.): 610 mm, Equipment: double-sided, FICEP NOZOMI 601 RAZ - ROBOTIC PLASMA CUTTING SYSTEM FOR STRUCTURAL STEEL | YEAR 2020 The Ficep NOZOMI 601 RAZ is a fully automatic robotic plasma cutting system for three-dimensional thermal processing of steel profiles and beams. An anthropomorphic 9-axis articulated robot machines all four profile faces without re-clamping, replacing layout, thermal cutting, coping and grinding with one automated work cell - less handling, shorter throughput times, reproducible quality from CAD/CAM data. CONDITION Used - technically sound. The machine is currently in productive operation. Year 2020 - a comparatively young machine of its class on the used market. - Inspection UNDER POWER during ongoing production possible by appointment. - Handover as preferred: directly from ongoing production (cleaned and serviced) or - at additional cost - reconditioned by ASM. - Details on the technical condition are disclosed individually upon serious interest. Fpsdpsxq Rpnefx Aayel FUNCTION & APPLICATION The NOZOMI 601 RAZ combines plasma cutting, coping, bevel cutting, weld-seam preparation and marking in a single pass. The non-contact laser scanner measures the profile surfaces and determines the torch start position automatically. The system processes H-beams, U-channels, L-angles and flat bar. Typical applications: structural steel, bridge and plant construction, series production of connection and node details. Plasma processing uses the Hypertherm True Hole process. TECHNICAL DATA - Manufacturer: Ficep | Model: NOZOMI 601 RAZ | Year: 2020 | S/N: 36291 - Machine type: Robotic plasma cutting system (thermal profile processing) - Condition: used, technically sound - Profile size min.: 80 x 10 mm - Profile size max.: approx. 610 mm profile height (flange width to be confirmed during inspection) - Profile types: H-beams, U-channels, L-angles, flat bar - Machining sides: 4 | Clamping: automatic - Number of CNC axes: 9 | Design: anthropomorphic articulated-arm robot - Profile measurement: laser scanner, non-contact, fully automatic (multi-surface) - Cutting process: plasma | Plasma cutting heads: 1 - Plasma technology: Hypertherm True Hole - Bevel cutting: 45-degree bevels, copes, weld-seam preparation - Marking function: yes (orientation marks, weld symbols, labelling) - Software: Steel Projects PLM (licence transfer on request), free vector programming, automatic nesting - Infeed length: 16 m | Outfeed length: 16 m - Extraction: integrated particle filter system Machine weight, electrical connection values and max. plasma cutting thickness are confirmed on request. SCOPE OF DELIVERY - 1 x Ficep NOZOMI 601 RAZ robotic thermal cutting system (year 2020) - 1 x anthropomorphic 9-axis articulated-arm robot - 1 x plasma cutting head (Hypertherm True Hole compatible) | 1 x automatic torch changer - 1 x laser-scanner measuring system (non-contact, multi-surface) - 1 x infeed roller conveyor (16 m) | 1 x outfeed roller conveyor (16 m) - 1 x automatic clamping device | 1 x integrated extraction system LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) is a specialist for Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Arrange an inspection under power | Price on request. Sale exclusively to commercial customers (B2B).

Condition: used, mileage: 811,366 km, power: 383 kW (520.73 HP), first registration: 10/2015, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, parking heater, soot filter, Vehicle No. for customer inquiries: 244 ----Vehicle with engine damage!!! * Oil pan removed, vehicle without OIL!!! * Intercooler full of water!!! * Vehicle with cylinder liner damage!!!! ----Special equipment: * Aero kit * Battery 225 Ah * Curb mirror, right, electrically adjustable and heated * EURO 6 engine * Cab: with air suspension * Cab: XXL * Suspension: Air ECAS * Cruise control with distance control * Roof deflector * Heated air dryer * Wheelbase 3600 mm * Headlight cleaning system * Exterior sun visor * Door extension for cab * Front axle VOK-08, angled * Xenon headlights * Additional high/low beam and fog lights with cornering light ----Standard equipment: * Axle configuration: 4x2 * Ambient lighting * Front/approach mirrors * Trailer socket 24V / 7-pin * Anti-lock braking system (ABS) * Anti-slip regulation (ASR) * Audio system: MAN Media Truck Advanced 12V radio with navigation system preparation * Exterior mirrors, electrically adjustable and heated, wide-angle mirror, heated * Onboard computer MAN-Tronic * Electronic Stability Program (ESP) * Electronic braking system MAN-Brakematic * Cab: with Nordic insulation * Driver's seat, comfort, air-sprung * Suspension: Air / Air (full air) * Power windows * Remote central locking * Tinted windshield * Generator 28 V 80 A * Transmission 16-speed - Type: ZF 16 S * Body/superstructure: semi-trailer tractor * Rocker arm - brake EVB * Automatic climate control * Fuel filter, heated * Fuel tank: combination tank - 400 liters diesel + 60 liters AdBlue * Steering wheel with multi-function buttons * Raised air intake * Air compressor 1-cylinder, 360 ccm * Engine compartment encapsulation * Side-mounted spare wheel jack * Fifth wheel coupling: Jost JSK 37 C * Disc brake, rear axle * Disc brake, front axle Fedozz Ubpspfx Aayspl * Tinted rear side windows * Seat cover / upholstery: comfort quality * Sun protection roller blind, side window, driver's door * Spray mist reduction * Stabilizer on one rear axle * Storage box accessible from the outside * TGX * Tinted door windows * Underrun protection, front * Viscous fan * Central locking * Permissible total weight 18.00 t ----German vehicle! * 9,850 EUR net plus VAT * A deposit will be retained for export to third countries or EU countries. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We will gladly accept your used vehicle in part exchange!! * Financing/leasing also possible in difficult cases * This description serves only for the general identification of the vehicle and does not constitute a guarantee in the legal sense. * The information does not claim to be complete. The information/descriptions/pictures provided are non-binding and do not constitute guaranteed characteristics. * We do not assume liability for errors and obvious mistakes. * The buyer is obliged to independently verify the condition and equipment of the vehicles before purchase. * Subject to price changes, typos, errors and prior sale. * Dear customer, please understand that due to the age and mileage, we prefer to sell the vehicle to businesses or dealers. Thank you very much. * We speak: * Greek / Miláme Elliniká

Condition: used, Compressor, Dürr-Dental 75L Oil-Free Dental Compressor with Refrigerated Dryer, Used Machine Manufacturer: Dürr Dental GmbH Type: 3621 / 14933 Overall dimensions: Width: 700 mm Depth: 550 mm Height: 890 mm Fpsdpfx Aajy Udfmeyjl Weight: 95 kg Tank capacity: 75 liters (Manufacturer: Silit-Werke) Power: 1.5 kW Intake capacity: 235 liters/minute Maximum operating pressure: 10 bar Speed: 1420 rpm Design: 3-cylinder, single-stage, completely oil-free compressor unit Year of manufacture: 1983 (extremely durable heavy-duty cast iron construction) Power supply: 400 V The special feature of this unit is the factory-installed high-capacity refrigerated dryer / condensing unit (the copper coil tower mounted on the side of the machine), which completely removes moisture from the compressed air. Since it produces 100% oil-free, dry and clean compressed air, it is perfectly suitable for dental clinics, dental laboratories, pharmaceutical/laboratory applications, or even precision industrial equipment (such as CNC machines, laser and plasma cutters), where even minimal moisture or oil vapor could damage the system.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 10,500 h, laser power: 6,000 W, travel distance X-axis: 4,064 mm, travel distance Y-axis: 2,032 mm, travel distance Z-axis: 100 mm, number of axes: 3, This 3-axis Salvagnini L3-4020 fiber laser cutting machine was manufactured in 2017. It features a powerful 6.0 kW solid-state fiber laser source, with a maximum working range of 4064 mm in the X-axis and 2032 mm in the Y-axis. The machine includes advanced automation components for efficient material handling and cutting. If you are looking to get high-quality sheet metal cutting capabilities, consider the Salvagnini L3-4020 machine we have for sale. Contact us for further details. • Height adjustment: 980 mm • Table load: 1250 kg • Laser Cutting Head: Patented "Dry Cooling" focusing head with auto-focus 210 mm lens and capacitance anti-collision profiling • Main electronic connection: 400 V / 50 Hz • Power consumption: 27 kWh • Year of Order Confirmation: 2017 • Machine Type: Fiber Laser Cutting Machine • Application Type: Sheet Metal Cutting • Maximum Axis Acceleration (X / Y): 1.5 g / 2.0 g • Material Cutting Capacity (Maximum Thicknesses): Mild Steel 25 mm, Stainless Steel 20 mm, Aluminum 20 mm, Copper 8 mm, Brass 8 mm • MTW4020.V5 Five-position storing module (Max capacity 3000 kg per tray) • Motorized Scissor Table (Max capacity 3000 kg) • Connection for automatic sheet loading and unloading (Unloading comb matrix) • Extra bay lengthened main automation structure • LTS4020 Tray supporting station with leafing magnets • MCL40 Cartesian Manipulator / Stacker with dual rotating gripping devices (Max part capacity: 65 kg single / 130 kg dual) • MCL Magnet kit (10 magnets total for picking up perforated or small parts) • TCV4020 Stacking Scissor Table (Max capacity 5000 kg, 1000 mm stroke) • CCVT40 Motorized Carriage (Short side mobile, max capacity 5000 kg) • PPC4020 Gantry Mobile Carriage & PMC4020 short-side mobile carriage • APC2 Adaptive Process Control (Double-channel sensor reading piercing spectrum and cutting losses) • AVS Artificial Vision System (HD camera for parts referenced program generation from dxf/dwg) Fedpfxozk D Hmo Aayspl • ANC Automatic Nozzle Change (8-position nozzle carrier with integrated cleaning brush) • GF Interchangeable grids with mild steel slats & CRS Scrap collection bins • ASF Fume Extraction unit with high-efficiency filtering sleeves, pneumatic cleaning, and integrated spark trap

Year of construction: 2010, condition: good (used), Granule dryer, granule drying system, granule conveyor, vacuum conveyor, vacuum station, drying container, vacuum suction conveying system, vacuum suction device, vacuum loader, hopper loader -Manufacturer: Plastic Systems, granulate conveyor vacuum suction conveying system -Type: PD2-40 FC1 -Side channel blower: Elmo Rietschle -Individual components: see photos Quantity: 1 piece available -Dimensions: 530/520/H1120 mm Fpjdpfxoy R S Twj Aayjl -Weight: 56 kg

Condition: excellent (used), G.i.N. Type: GL5350 GL5350-8H-1R3L G.i.N. Intelligent Data Logger GL5350 Performance meets intelligence Future generations of vehicles will be increasingly equipped with intelligent driver assistance systems, complex multimedia components, and systems for autonomous driving. These complex, networked technologies generate ever-larger amounts of data, making troubleshooting during the development phase more complex and time-consuming. To shorten test drives, reduce their number, and still meet the testing requirements of all departments, the advantages of an intelligent and powerful data logger, such as the GL5300 series, come into play. The GL5300 series covers the time-synchronized recording of LIN/CAN & CAN FD bus systems, FlexRay networks, and Ethernet networks (TCP/UDP/DLT/ADB and Ethernet raw logging). This series also offers the connection of up to 8 cameras and up to 5 GLX504 units for an additional 20 CAN FD channels with SIC transceivers, as well as up to 3 GL5450 units for the synchronous recording of up to 60 100-Base-T1 (30 taps) and up to 18 1000-Base-T1 lines (9 taps). Residual bus simulation Classification unit Gateway CCP/XCP on CAN, XCP on CAN FD, XCP on Flexray, XCP on Ethernet Sending of any, freely configurable messages Selective recording (extensive trigger and filter conditions) Data transfer via LAN/WLAN, USB, and mobile network Operation via menu control Technical data: GL5300 configuration GL5350-8H-1R3L CAN interfaces CAN 2.0 16 CAN FD 4 LIN interfaces 5 RS-232 interfaces 7 Analog inputs 10 bit 4 Operating voltage +7 V … +50 V Power consumption at 12 V: typ. 10.3 W Current consumption at 12 V: in sleep mode < 2 mA in semi-sleep mode typ. 180 mA in operation typ. 860 mA Operating temperature range -40 °C ... +70 °C Housing: Material side profiles: Al Mg3 Lid: EN AW-6060 (AlMgSiO,5) T66 Decorative strip: ABS Fpsdszg Tzrjpfx Aaysl Dimensions (L x W x H) 212 x 290 x 80 Weight ~ 3500 g Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: H-frame, railing Equipment: - Welded frame - 6 lashing points - H-frame at the front Net: €2,079.83 / Gross: €2,475.00 Article number: AZL113251337.01 Technical data: • Brand: Hapert Trailers • Model: Azure L-1 • Vehicle type: Box trailer • Vehicle condition: New vehicle • First registration: without first registration Fpodpfezu N Rxex Aayol • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 250 x 130 x 37 cm • External dimensions (LxWxH): 382 x 178 x 132 cm • Loading height of the floor: 54 cm • Permissible total weight: 1,350 kg • Unladen weight: 330 kg • Payload: 1,020 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum side panels, anodized with profile channel on the outside • Accessories such as tarpaulin buttons, hooks, or ring eyes can be mounted with hammer-head screws without drilling. • Screen-printed wood floor, continuous without joints, non-slip, and waterproof • Rear tailgate made of aluminum in the proven Hapert design • Side panel retaining ropes on the rear tailgate • Hinges for the rear tailgate welded to the frame • Stable eccentric locks for the rear tailgate, recessed in the side panel profile • Very stable steel frame, welded • Frame completely hot-dip galvanized • Reinforced, stable, bolted V-drawbar • Steel fenders • Option to insert at all 4 corners for tarpaulin frames, lattice attachments, side panel attachments, or front wall extension • Many stable cross members, resulting in high point load capacity • Lateral side panel struts welded (increased lateral stability) • H-frame at the front, removable (front wall gallery) • Hole railing on three sides, 6 cm (Combi Protect Rail), also usable with locking bars and lashing straps - round holes 25 mm, elongated holes 54x25 mm • 6 lashing eyes recessed on the inside in the side edge (1000 DaN/kg), TÜV certified! • Maintenance-free rubber spring axle from KNOTT • Reversing automatic • KNOTT overrun device and parking brake • 13-pole plug • Reversing light • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to ask about any specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or temporary registration plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, mileage: 858,800 km, power: 316 kW (429.64 HP), first registration: 01/2003, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: yellow, gearing type: mechanical, emission class: euro4, loading space length: 6,500 mm, loading space width: 2,550 mm, Year of construction: 2003, Equipment: ABS, air conditioning, parking heater, Roll-off tipper Fodpfx Aajzxv Skjyepl In operation with us for 14 years Polish registration For containers up to 6500 cm in length Vehicle runs and drives well Many new parts in recent years Special equipment: Burl wood dashboard, passenger seat armrest, driver’s seat armrest, wide-angle exterior mirrors, electrically adjustable and heated (left), Comfortshift gear shift, air horns on cab roof (2), cab: electro-hydraulic tilting system, comfort driver’s seat, air-suspended, heated and air-conditioned with lumbar support, cold start device, heated fuel filter, 400 L fuel tank, reinforced clutch, cooler box, Eberspächer D4S additional air heater, seat covers/upholstery in comfort quality, external sun visor, sun blinds for side windows (driver and passenger doors), sound system, 12V and 24V sockets in cab, front underride protection, hands-free system preparation Additional features: Axle configuration: 6x2, front axle load: 8.0 t, trailer socket 24V / 7-pin, ABS trailer socket, anti-slip regulation (ASR), electrically adjustable and heated exterior mirrors, wide-angle mirrors, battery 175 Ah, battery box, kerb mirror right side, rear axle differential lock, EDC engine management, MAN Brakematic electronic braking system, Euro 3 engine, cab with air suspension, XXL cab, comfort driver’s seat, tachograph, suspension: leaf/air, electric windows, 100 A alternator, speed limiter 80 / 85 km/h, rear axle HY-1350, pollen filter, chassis/cab construction, EVB brake lever, adjustable steering column (steering wheel), 1-cylinder air compressor, 10.5 L / 316 kW diesel engine, trailing axle NO-08, liftable, radio preparation 24V, wheelbase 4500 mm, rear disc brakes, front disc brakes, side underrun protection, front axle stabiliser, plastic bumper, rear underride protection, cranked front axle VOK-08, electronic immobiliser, central locking, permissible total weight 26.0 t * Air suspension * Auxiliary heater Speed control: Cruise control Air conditioning: A/C Hydraulic system: Tipping hydraulics Safety: ABS * EBS

Condition: used, This listing is for 1 of 2 Cole Parmer MasterFlex L/S 7554-95 Peristaltic Pump with a Masterflex Easy-Load 3 pump head . The unit is in full working condition and is ready for immediate release. The Cole-Parmer MasterFlex L/S 7554-95 Peristaltic Pump is a versatile and reliable solution for accurate fluid transfer in laboratory, pharmaceutical, and industrial environments. Designed to handle a wide range of flow rates and fluid viscosities, this peristaltic pump offers precision, ease of use, and durability. Key Features: Flow Rate: Delivers flow rates from 0.6 to 3400 mL/min, adjustable based on the tubing size used. Variable Speed Control: The pump operates at speeds between 6 and 600 RPM, allowing precise control of flow. Reversible Pumping: Enables bi-directional flow for easy priming, purging, and efficient fluid transfer. Digital Display: Provides a clear, easy-to-read display showing speed, direction, and operational status for precise monitoring. Easy Maintenance: Tool-free tubing changes and a low-maintenance design for efficient operation. Fsdpfx Aajxv A Sxjyspl Compatibility: Works with a variety of MasterFlex L/S tubing, ensuring adaptability for different fluid handling needs. Durable Construction: Engineered for reliable, long-term use, with corrosion-resistant materials to withstand demanding applications. Specifications: Flow Rate Range: 0.6 to 3400 mL/min Speed Range: 6 to 600 RPM Power Requirements: 90-260 VAC, 50/60 Hz Operating Temperature: 0 to 40°C (32 to 104°F) Dimensions: 8.6" H x 9.4" W x 11.1" D (21.8 cm x 23.9 cm x 28.2 cm) Weight: 15 lbs (6.8 kg) The Masterflex Easy-Load 3 pump head is designed for user-friendly operation and fast tubing changes. Key features include: Automatic Retention Mechanism: The spring-loaded occlusion lever opens the occlusion bed and retracts the tubing retainers, allowing tubing to be easily loaded and unloaded. Tubing Range: Suitable for use with Masterflex L/S Precision tubing, with a flow range of 0.001 to 2900 mL/min depending on tubing size. Stackability: Up to 4 Easy-Load 3 pump heads can be stacked on one compatible pump drive, making it an efficient solution for multi-channel applications. Easy Integration: Same-side tubing entry/exit permits easy integration into space-limited applications, with the option to mount and operate the pump head in any of four positions (depending on the drive).

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: AA1/015315, functionality: fully functional, planing width: 240 mm, number of spindles: 8, working height: 140 mm, TECHNICAL DETAILS Max. planing width: 240 mm Max. planing height: 140 mm Infeed table length: 2,500 mm Feed drive: Cardan drive Lubrication system: Automatic Diameter of planing shaft: 40 mm Spindles Number of spindles: 8 pcs. Spindle 1 Spindle type: Bottom Tool available: Yes Spindle 2 Spindle type: Right Tool available: Yes Spindle 3 Spindle type: Left Motor power: 15 kW Tool available: Yes Spindle 4 Spindle type: Right Motor power: 11 kW Tool available: Yes Spindle 5 Spindle type: Left Motor power: 11 kW Tool available: Yes Spindle 6 Spindle type: Top Motor power: 15 kW Tool available: Yes Spindle 7 Spindle type: Top Motor power: 11 kW Tool available: Yes Spindle 8 Spindle type: Bottom Motor power: 11 kW Tool available: Yes Feed system Manufacturer: H&M Max. infeed length: 250 mm Discharge system Manufacturer: H&M Max. discharge length: 760 mm Fpedpfx Aszxcfdjayol MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 20,000 x 2,400 x 2,200 mm Unladen weight: 6,000 kg Number of transport packages: 8 pcs. EQUIPMENT Tools for all 8 spindles Automatic lubrication system Electrical wiring diagrams Technical data Documentation CE marking

Condition: used, mileage: 141,880 km, power: 315 kW (428.28 HP), axle configuration: 4x2, color: red, gearing type: automatic, suspension: air, Year of construction: 2020, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (at the telephone number provided). Fpjdpfey Ivqnsx Aayjl Mercedes-Benz Actros 1843 LL 4x2 BDF swap body chassis S&G driving school equipment, 6 seats, A1A front axle with air suspension, A1D front axle 8.0 t, A1Z front axle, angled design, A2E rear axle, crown wheel 440, hypoid, 13.0 t, A3D rear axle with active lubrication, unregulated, A5H axle ratio i = 2.611, B1B electronic braking system with ABS and ASR, B1F heater, electronic compressed air supply unit, B1I electronic compressed air supply and control, high, B2A disc brake, on front and rear axles, B2X parking brake, electronic, B3H secondary water retarder, B4A condensate monitoring, for compressed air system, B4M compressed air tank, steel, B5A trailer brake, 2-line, brake connections on the left, B5D trailer stability control assistant (TSA), B5L trailer brake connection at the rear, Duo-Matic+Standard, C3H wheelbase 5500 mm, C4I frame overhang 2400 mm, C6I power steering pump, regulated, C8Y underbody fairing, aerodynamic, D0S compressed air connection, in the cab, D1C driver's air suspension seat, comfort, D1P co-driver's air suspension seat, comfort, D3Q seat cover, velour, D4Q shaving mirror, D4S sun visor, 1-piece, electric, front window, D4T curtain, transversely in front of the bed(s), D4Y sun visor, side, driver's side, D5F LED ambient lighting, for driving and living area, D6F air conditioning, D6I waste heat recovery system, D6M hot water auxiliary heater, cab, D7G storage compartment lid, driver's and co-driver's side, D7J drawers, under the bed, D7R storage flaps, above the windshield, D8N lift roof, electric, D9A pre-equipment for comfort bed, top, wide, E5H switch for night driving light, E5K switch for MirrorCam, on the bed, E6A trailer socket 24 V, 15-pole, E7F cable remote control for air suspension, F1H L-cab BigSpace, 2.50 m, level floor, F3C cab mounting, comfort, air-sprung, F3W cab tilting device, mechanical-hydraulic, F4H cab rear wall without window, F4X external storage compartment flap, left, F4Z storage box, left under the cab, F6C windshield tinted, F6I front mirror, heated, F6Q air horn, F6T MirrorCam, F7T door extension, F7X cab entry left/right, fixed, F8E locking system, with central locking, F8F comfort locking system, F8V light sensor, F8W rain sensor, G0K driving program economy/power, G0T Predictive Powertrain Control, G2B transmission G 211-12/14.93-1.0, G5A single-plate clutch, I4A axle configuration 4x2, I5A 18.0-tonner, I6I vehicle production plant Wörth, I6X air suspension, rear axle, J1O digital tachograph, 2nd generation, ADR, J1S tachograph manufacturer VDO, J2K loudspeaker, 2-way system, J2U navigation system, J3U prerequisite Fleetboard Manager App, J3V Truck Data Center 7, JDSE rear seat system, 3 persons, 3-point belts, JDSM middle seat with seat heating, air-sprung, JDSY head impact protection driver's/co-driver's seat, JDYF pedals for driving school vehicle, middle seat and co-driver, K7D exhaust system, tailpipe to the right outside, L0A lighting regulation, according to UN-R 48.06, L1A bi-xenon headlights, L1C LED daytime running lights, L1D automatic high beam/low beam and turning lights, L1H fog lights, halogen, L1P LED rear lights, L2H side marker lights, flashing, L3A work lights, below, L3Z headlight cleaning system, M5A 2nd generation engine OM470, M5C engine version Euro VI, D, M5V High Performance Engine Brake, M6L air compressor, 2 cylinders, M7K radiator grille, M7T water

Condition: used, Year of construction: 2007, ABAC Genesis 7.508 Air Compressor on Air Receiver Tank Working Pressure 8 Bar, Free Air Delivery 1.2m3/min, Power 7.5kW, Weight 390kg, Air Receiver Tank Cap 272 litres. S/No. 304263 001 (2007), Total Hours 7240, on Load 983. Country of Origin: Italy Fpsdezn Uvtspfx Aayel Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Location: These lots are located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2009, The new cold-regenerating adsorption dryer from Parker Zander combines proven and reliable elements of adsorption technology and impresses with its clear design. Key features of the K-MT series adsorption dryers, such as: • one-piece adsorber profiles • separately controlled main and discharge valves in a leak-free design • compact check valve combination, guarantee continuous operational reliability and high availability. All K-MT series adsorption dryers feature: • self-cleaning screen trays on the wet side • high-quality desiccants During adsorption, the desiccant stores the moisture contained in the compressed air. Parker Zander uses exclusively highly active, high-capacity molecular sieve desiccant. This desiccant guarantees a long service life at high inlet temperatures or low pressure dew points. Regeneration takes place in the opposite direction to adsorption. A portion of the dried compressed air is depressurized to atmospheric pressure and passed through the desiccant bed to be regenerated. The moisture stored during adsorption is carried away with the partial flow of dry regeneration air. The regeneration air requirement of 14.3% for cold-regenerated adsorption dryers is based on: Operating pressure 7 bar Inlet temperature 35°C Fpjdpfjypb Duox Aaysl Pressure dew point -40°C for a cycle with: - 5 minutes of adsorption - 4 minutes of desorption - 1 minute of pressure build-up The Parker Zander 10-minute cycle, with 5 minutes of adsorption, includes 12 load cycles per hour. The standard 6-minute cycle, with 3 minutes of adsorption, requires 20 load cycles per hour and therefore inevitably 5.6% more regeneration. The Parker Zander 10-minute cycle saves energy costs with reduced wear. Multitronic, the control system with groundbreaking new functions and a new design, is perfectly tailored to the K-MT series of cold-regenerating adsorption dryers. It allows for highly effective adaptation of the adsorption dryer to even the most diverse operating conditions. From the continuously visible status to the pressure dew point control of the adsorption dryer, the benefits for the operator are readily apparent with Multitronic. Housed in a clear and easily accessible control cabinet, the Multitronic system offers: • user-friendly microprocessor control for all Parker Zander Heatless dryer systems • flexible cycle time settings. • Front-panel LEDs for individual functions such as: - Operation - Adsorption - Desorption • Selector switch I-0-2 for fixed cycles or variable cycles as synchronization with the compressor Optional features: • Direct pressure dew point measurement including digital display • A potential-free output for the pressure dew point limit • The ability to set the desired dew point in the range of -25°C to -40°C Technical specifications: K-MT 8 Capacity m³/h: 72 Connection: G ½ Pressure bar: 16 Weight kg: 77 Electrical connection watts: 50 Year of manufacture: 2009 Manufacturer's price: €8,880 "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, empty load weight: 9,250 kg, maximum load weight: 23,750 kg, overall weight: 33,000 kg, axle configuration: 3 axles, first registration: 11/1997, loading space length: 13,400 mm, loading space width: 2,460 mm, loading space height: 2,520 mm, total length: 14,000 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 R 22,5, color: white, mileage: 1,001 km, fuel type: diesel, gearing type: other, driver cabin: other, Equipment: ABS, tail-lift, Vehicle location: Bovenden, 3 axles, BPW axles, air suspension, 1st axle can be lifted, raising and lowering function, ABS (anti-lock braking system), side aluminum fender, aluminum loading platform, stationary, diesel/electric refrigeration unit. Superstructure: Carrier Maxima Plus, BÄR loading platform with 1500 kg lifting capacity, permanently installed compressor refrigeration unit! Disc brakes. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Fsdpfx Asi N H Hmoayspl

Condition: excellent (used), Year of construction: 2017, 2017 RoboJob Turn-Assist-E Robotic Automated Robotic Loading System With Fanuc M-10iA/12 (A05B-1224-B202) Robot & Robot Controller Fpedpfezvnn Sex Aayel RoboJob Turn-Assist-E- Minimum Ø Of The Workpieces 25mm. Maximum Ø Of The Workpieces 400mm. Minimum Width Of The Side Of Hexagonal Workpieces 25mm. Maximum Width Of The Side Of Hexagonal Workpieces 170mm. Maximum Stacking Height 80-100mm. Maximum Stacking Weight 600kg. Width Of The Automation 1.902mm. Depth Of The Automation 740mm. Height Of The Automation 2,202mm. Weight Of the Automation 1,000kg. Robot 6 Axes. Maximum Reach 1,420mm. Maximum Payload At Wrist 12kg. Robot S/No. R16Y03327. RoboJob S/No. 35-17-352 (2017). Please note a loading charge of £100 + VAT will be added to the buyer's invoice. With Handwheel Robot Control, Sick Safety Light Unit, Quantity Of Material Separators/Supports, Flip Over Unit & Safety Screen. Robot Weight 130kg. Controller Weight 120kg. Please note a loading charge of £100 + VAT will be added to the buyer's invoice.

Condition: new, Year of construction: 2017, functionality: fully functional, machine/vehicle number: API793297, overall weight: 1,431 kg, power: 37 kW (50.31 HP), pressure (max.): 8.6 bar, type of cooling: air, Equipment: documentation/manual, type plate available, BRAND NEW UNUSED Fedoxbtk Nspfx Aayspl Here we have a rare opportunity to purchase an 100% oil free air cooled variable speed drive twin stage rotary air compressor. Still on the manufacturers pallet from the factory in Belgium Energy efficient VSD machine

Year of construction: 2008, operating hours: 12,897 h, condition: ready for operation (used), travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,600 mm, overall weight: 34,000 kg, total width: 11,000 mm, total height: 6,450 mm, product length (max.): 12,500 mm, spindle speed (max.): 2,500 rpm, tool weight: 25,000 g, number of axes: 5, This 5-axis SHW UFZ 6L Bed Type Milling Machine was manufactured in 2008. It features an impressive X-axis travel of 6000 mm, Y-axis travel of 2100 mm, and Z-axis travel of 1600 mm. The machine includes an automatic tool changer with a capacity for 150 tools and a robust clamping plate surface of 3600 x 3750 mm. If you are looking to get high-quality milling capabilities, consider the SHW UFZ 6L machine we have for sale. Contact us for further details. Spindle operating time: 12,897 hoursHydraulic operating time: 43,912 hours • W-axis travel: 1500 mm • Digital feed drives • X-axis: 2–20000 mm/min • Y-axis: 2–24000 mm/min • Z-axis: 2–24000 mm/min • Rapid traverse • X-axis: 20000 mm/min • Y-axis: 24000 mm/min • Z-axis: 24000 mm/min • Spindle • Head: Automatic universal milling head • Main spindle motor: Siemens 1PH7 167 • Gearbox: ZF 2K300 / SEW FF37 / FA47 B / KA Z37 • Repeatability: ±0.002 mm • Spindle Speed (60 min Max): 3200 rpm • Spindle Speed (15 min Max): 4000 rpm • Tool changer • Type: Automatic • Capacity: 150 tools • Max tool length: 400 mm • Max tool weight: 25 kg • Tool taper: SK50 DIN 69871 • Station: Pickup-station Fpsdpoy Nzdcjfx Aayel • Table/plates • Clamping plate surface: 3600 x 3750 mm • Electronics and control • Control panel: Integrated CNC in work platform • Servo motors: Siemens 1FT6 series • Drives/regulators: Indramat ECOdrive 3 • Measuring systems: Heidenhain LS 186C / LB 382C / ROD 480 / ROQ 425 • Electronic pressure switch: ifm PN 5, PN 7 • Power supply • Voltage: 400 V, 3-phase, 50 Hz • Power connection: approx. 80 kVA • Main fuse: 160 A (slow-blow) • Conductor cross-section: 70 mm² • Pneumatics and hydraulics • Pressure: 4–6 bar • Connection: G1/4 • Air consumption: approx. 320–400 l • Valve terminal: Festo CP10+ • Hydraulic system: Bosch with 1 x 50 l accumulator Additional equipment • CNC rotary table unit: Demmeler DRTN • Table surface: 2000 x 1800 mm • Max rotation speed: 4 min^-1 • Collision monitoring: Brankamp Typ CMS (1-channel) • Safety brake: Mayr Typ 891... • Cooling unit: Schimpke DK 38 V / BKW SK 250D • Coolant filter: Knoll KF110/1100 • Oil filter: ARGO D 062-156 • Chip conveyor: Richter SP 250/63 (x2) • Measurement system: m&h 20.10 Set Multi SK50 / m&h 35.10 TS plug • Lubrication: Automatic • Machine enclosure: 3-sided Technical Specification Taper Size SK 40

Condition: excellent (used), Here, we offer you an RMS vibration exciter. Fpjdpfxszdta Ao Aaysl RMS vibration exciter SW 3009 with side-channel blower SKP49033-01/06 Type: SW 3009 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.