Used Spectroline Es-160/Fbe for sale (12,996)

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 909 h, load capacity: 1,000 kg, lifting height: 6,010 mm, free lift: 1,995 mm, fuel type: electric, mast type: triplex, construction height: 2,540 mm, drive type: Elektro, Electric 3-wheel forklift Load centre: 500 Dcodpfxoyw A E Dj Anfjg Mast type: Triplex Condition: Ready for use and fully operational Technical condition: Very good Front tyre type: Superelastic Rear tyre type: Superelastic Battery voltage: 24V Battery type: Lithium-ion Battery year: 2022 Description: Sideshift, Sideshift NEW!!! 3rd valve, 4th valve, roof cover, full free lift, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 775 h, load capacity: 1,300 kg, lifting height: 4,740 mm, free lift: 1,545 mm, fuel type: electric, mast type: triplex, construction height: 2,090 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tyre type: Superelastic Rear tyre type: Superelastic Battery voltage: 24V Battery capacity: 805Ah Dcodpfx Aoyw A Ewjnfjg Battery year: 2018 Description: Sideshift, fork positioner, 3rd valve, 4th valve, front work lights, full free lift, CE certificate, safety light.

Condition: new, maximum load weight: 63,960 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You will find our complete range of vehicles, including immediately and short-term available units, on our website. Excerpt from the equipment features. Full equipment details available on request. Chassis: * Welded construction made from high-quality steel sections with punched cross-members, designed for high point loads * Outer frame made of UNP steel Coupling device: * 2-inch kingpin Underrun protection: * In accordance with EC regulations, bolted version Side guard: * In accordance with EC regulations Landing gear: * Landing legs with single-sided operation, static load approx. 66 t / lifting capacity approx. 24 t Axles: * 5 x 10 t air-suspended axle assemblies, SAF brand, with drum brakes approx. 400 x 200 mm * ABS * Wheel connection: centre-guided 10-hole with ET 0 * Total air suspension travel approx. 200 mm (raising approx. 140 mm, lowering approx. 60 mm), controlled via rotary slide valve with detent function Steering: * 1st axle as self-steering, 2nd axle fixed, 3rd, 4th, and 5th axles forced steered via linkage * Centralized grease points positioned externally Axle lift: * First and second axles automatically liftable, with additional manual override at the chassis Brake system: * Two-line compressed air brake system in accordance with EC regulations, with EBS and RSS, automatic load-dependent control, Wabco 4S/3M system * Spring brake cylinders as parking brake, tamper-proof coupling heads permanently mounted on the front cross member, without connection line to the tractor unit * Aluminum air reservoirs Tyres: * 10 x 445/65 R22.5 164J on 11.75x22.5 ET 0 rims – brand of our choice TPMS: * Tyre pressure monitoring system (TPMS) in accordance with ECE R141, with data transmission to tractor unit Mudguards: * In accordance with EC regulations, 1st axle front, 2nd axle rear, 3rd–5th axles each with 1/4 PVC mudguard front and rear * Rear mudguards with spray suppression flaps Load securing: * 5 pairs of folding lashing rings, evenly distributed (lashing capacity approx. 14 t) * 11 pairs of hook plates welded into the outer frame (lashing capacity approx. 3 t) * 10 pairs of lashing rings in the side outer frame, evenly distributed (lashing capacity approx. 8 t) Stanchion pockets: * 10 pairs of stanchion pockets recessed into the outer frame * 6 pairs of stanchion pockets flush-mounted in the floor (outer longitudinal beam) Removable stanchions: * 16 galvanized plug-in stanchions, approx. 80 x 80 x 8 mm, usable length approx. 850 mm Stanchion magazine: * Each side, in front of the front wall, a magazine for 8 plug-in stanchions approx. 80/80 mm Front wall: * Bolted corner stanchions filled with aluminum box sections, interior with full-width and full-height steel collision protection plate Floor: * Approx. 28 mm Z-hardwood floor, recessed in the outer frame, flush finished Lighting system: Dsdswx Dcaopfx Anfocg * In accordance with EC regulations, 24 Volt with multi-chamber rear lamps * LED side marker lights * LED position lights, white, front * LED marker lights, rear * Number plate lights, 1x 15-pin and 2x 7-pin connectors at front cross member Equipment: * Two chocks with holders * Warning board according to ECE 70 * Work light at the lamp bracket (activated via reverse gear) * Holder for rotating beacon at the rear (includes beacon) * Each side left and right: 1 permanently mounted access ladder, including plug-in step * Smart Board * 'Vehicle swings out' sticker, load centre marking sticker Paintwork: * Chassis and front wal

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Dsdpfewx Dctex Anfecg Tyres: * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Superstructure: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing gear black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Condition: excellent (used), Hydromotor for screw cylinder Dcedpfxsfnqagj Anfog Injection unit size ES3550 Hägglunds Drives Type CA50 20 2 0 0 N 004

Condition: ready for operation (used), Siemens 6SL3210-5HE15-0UF0 S210 Servo Drive Version: 03 SN: T-P76031605, mint condition, never in operation, 100% functional, scope of delivery as shown in photos. The agreed sales discounts do not apply to this item. Please inquire separately for the price! Dodexahbtjpfx Anfscg

Condition: ready for operation (used), Siemens 6EW1160-5AE Power supply built-in power supply unit . A 627 590 , used, normal signs of wear, 100% functional, scope of delivery as per photos Dcsdpfoi Edwqjx Anfsg

Condition: ready for operation (used), Hofmann AB 9000 Electromagnetic ring balancing system SN:11160318 ,used, minor signs of wear, 100% functional, scope of delivery as per photos Dedpfsr Nrbtex Anfecg

Condition: ready for operation (used), Siemens signal processing HCP Board IMCAD L93742 9/99 board SN 42369-92, used, minor signs of wear, 100% functional, scope of delivery as per photos Djdpfxsxahrxs Anfocg

Condition: ready for operation (used), Siemens 6DD1606-2AB0 process module , used, normal signs of wear, 100% functional Djdei Edl Rspfx Anfjcg

Condition: new, Siemens Teleperm M 6DS1603-8RR binary output E Version 1 > unused < in opened original packaging, 100% functional Dodpexahxfefx Anfjcg

Condition: ready for operation (used), Fanuc A06B-6087-H130 Power Supply Module SN:EA7601604, used, normal signs of wear, 100% functional, scope of delivery as per photos. Dcodpfex Era Hex Anfog

Condition: ready for operation (used), Siemens 6GK5216-0BA00-2FC2 SCALANCE XC216EEC E-Stand 1 SN SVPL2139223, used, in good condition, 100% functional, delivery scope as per photos. Dcedpfx Ansx Dxdyefsg

Condition: used, mileage: 30 km, power: 120 kW (163.15 HP), first registration: 01/2023, fuel type: diesel, overall weight: 5,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, * 3 units available * Chassis NEW * Permissible total weight 5500 kg * Rear-wheel drive Dodpfx Asxy Ehwonfscg * Automatic transmission * Air conditioning * Cruise control * Multifunction steering wheel * DAB+ radio ----Internal vehicle numbers: 11536 11357 11358----Subject to errors & prior sale WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. Whatsapp Whatsapp

Condition: used, Year of construction: 2016, operating hours: 1,786 h, * Engine power: 73.4 kW * Year of manufacture: 2016 * Weight: 13,700 kg * 4x stabilizers * Rear-view camera * Air conditioning * Pallet forks * Lifting hook -----Internal vehicle number: 9626----Subject to errors and prior sale. WhatsApp support available! Dedpfjviqgzjx Anfocg If you have questions about the vehicle or need further information, feel free to contact us easily via WhatsApp WhatsApp German, English -- WhatsApp German, English, Arabic

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, drying oven, tempering oven Caltherm 150 C Dedovpagdjpfx Anfjcg For sale in excellent condition CALTHERM manufactured air mixing multi-purpose Convection oven heat treatment oven electric heated oven with one chamber, air mixing Max temp: 150°C internal dimensions: length: 200cm height: 200cm width: 100cm electronic heating elements 8pcs air circulation fan: 4kw 380v 50Hz temperature range: 50-160 Celsius external dimensions:

Year of construction: 1995, condition: excellent (used), REIFENHÄUSER RAM 160 PIPE HITCH - 6 Caterpillars Year of manufacture: Approx. 1990 Caterpillars: 6 Diameter: Min. 30 mm, Max. 160 mm Haul-off speed: 0.2 - 10 m/min With central chain lubrication Renewed gear motor and frequency converter With remote control and approx. 10 m cable Condition: Very good, ready for operation The haul-off is my property We speak Spanish We speak French We speak English Dcodpowq E Etjfx Anfog Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 3,260 h, load capacity: 1,500 kg, lifting height: 4,300 mm, free lift: 1,430 mm, fuel type: electric, mast type: triplex, construction height: 1,975 mm, fork length: 1,200 mm, empty load weight: 3,200 kg, total length: 1,850 mm, drive type: Elektro, construction width: 1,000 mm, 3-wheel electric forklift Load centre: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tyres type: Superelastic Rear tyres type: Superelastic Battery voltage: 24V Battery capacity: 600Ah Battery year: 2015 Dcsdpfx Anjxwfviefog Sideshift, 3rd valve, rear work light, front work light, overhead guard, front windscreen, load guard, pulse control, full free lift, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 3,110 h, load capacity: 1,500 kg, lifting height: 4,300 mm, free lift: 1,430 mm, fuel type: electric, mast type: triplex, construction height: 1,975 mm, fork length: 1,200 mm, empty load weight: 3,200 kg, total length: 1,850 mm, drive type: Elektro, construction width: 1,000 mm, Electric 3-wheel forklift Load center: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Dcjdpfx Ajxbixionfsg Technical condition: good Front tyre type: superelastic Front tyre condition: 60 - 80% Rear tyre type: superelastic Rear tyre condition: 60 - 80% Battery voltage: 24V Battery capacity: 600Ah Battery year: 2014 Sideshift, 3rd valve, rear work light, front work light, roof cover, windscreen, half cab, load guard, electronic control, full free lift, CE certificate.

Condition: new, maximum load weight: 39,850 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the specifications. Full equipment details available upon request. Chassis: - Welded construction from high-quality steel sections with through-profile cross members - Designed for high point loads. Outer frame as UNP profile - Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide - Bracket at front for customer-side mounting of a support device, approx. 90 x 90 x 4 mm Coupling device: - 2-inch kingpin (mount also suitable for 3.5) Rear underrun protection: - According to EC, bolted design Side underrun protection: - According to EC Landing gear: - 24 t landing legs with single-side operation (test load approx. 66 t), Jost Modul CH (Heavy Duty) S-foot Axles: - 3 x 9 t air suspension axle units, manufacturer of our choice, with disc brake approx. 430 x 45 mm - ABS - Hub-centric wheel mounting, 10-hole, ET 120 - Total air suspension travel approx. 200 mm, of which raising approx. 140 mm and lowering approx. 60 mm, controlled via rotary slide valve with detent, with RTR function - Switch for second ride height (+ approx. 50 mm) on the bracket of the lifting and lowering device - Smartboard/TIM/Infocenter, without TPMS display Lifting axle: Dcedpfxjwx Dbps Anfeg - First axle liftable, with fully automatic load-dependent lift control, starting aid via button in the driver’s cab (15-pin socket PIN12). Button in cab not included in delivery Braking system: Manufacturer of our choice - Two-line compressed-air braking system according to EC with EBS and RSS, automatic load-dependent adjustment - Spring brake cylinder as parking brake - Mistake-proof coupling heads mounted securely on front cross member, without connecting line to the motor vehicle Tyres: - 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (manufacturer of our choice), ET 120 - Basic version tyre pressure monitoring, connected to EBS CAN-bus system - Tyre pressure display in driver’s cab (pre-installed by truck manufacturer) Mudguards: - According to EC, PVC mudguards (half-shells) over all axles - Anti-spray mudflaps Load securing: - 8 pairs of lashing plates welded into the outer frame (pulling force approx. 3 t) - 6 pairs of lashing rings on the side of the outer frame, evenly distributed (pulling force approx. 10 t) - 13 pairs of lashing eyes (bails) on the outer frame (tested lashing capacity approx. 2.5 t per point) Stake pockets/stakes: - 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm - 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm - 10 plug-in stakes made of galvanized box section, approx. 80 x 80 x 4 mm, with stop at the bottom Front wall: - Bolted front wall, approx. 1,200 mm high, covered with approx. 5.5 m sheet metal Stake magazine: - Inside the front wall, a magazine for plug-in stakes Floor: - Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: - According to EC, 24 volts with multi-chamber taillights - LED side marker lights - LED front position lights white - LED rear outline marker lights - Number plate lights - 1x 15-pin and 2x 7-pin socket connectors on the front cross member Equipment: - Chock with double holder - Warning sign according to ECE 70 - 2 LED work lights on the lamp bracket (switched by reverse gear) - Bracket for optional rotating beacon at rear (incl. beacon) - 1 foldable and extend

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Dedpfxew U H Sbj Anfjcg Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: new, maximum load weight: 34,350 kg, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our entire vehicle inventory with immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment details available on request. Chassis: * Welded construction made of high-quality steel profiles with through cross members, designed for high floor or point loads, equipped with a heavy-duty outer frame * Loading platform at the rear as a welded steel construction, with two welded-in outer driving rails made of 5-hole steel plate (Lohr/Rolfo hole pattern system) approx. 2,250 mm in length, hydraulically lowerable by approx. 350 mm * Rear section includes a hydraulically extendable loading table (approx. 1,500 mm), constructed from welded steel with 5-hole steel plate (Lohr/Rolfo hole pattern system) cover, lighting brackets, and two ramp compartments and ramp supports * Drive and control of the rear operated via electric-hydraulic power unit housed in a stainless-steel box mounted on the left of the chassis, with radio remote control * Power supplied by the towing vehicle’s battery (NATO socket on the front wall, without connecting cable to the truck) Towing Device: * 2" king pin, replaceable from below Underrun Protection: * Fixed as per EU standard Landing Legs: * 2 x 12 t support winches with 2-speed gearbox Axles: * 3 x 9 t air suspension axle assemblies * Brand: SAF, disc brakes approx. 370 x 45 mm * ABS * 10-hole hub-centric wheels, offset ET120 * Total air suspension travel approx. 310 mm (lifting approx. 220 mm, lowering approx. 90 mm) * Air suspension controlled via hand lever with stop function Lift Axle: Dsdpfx Anowt Iylefscg * 1st and 3rd axles automatically liftable, can also be actuated from the chassis frame or via PIN 12 of the lighting socket Tires: * 6 units, 445/45R19.5, fitted on 14.00X19.5 rims, 10-hole ET120 Mudguards: * As per EU regulations, 1/4 PVC mudguards * 1st axle front and rear, 2nd and 3rd axle rear Brake System: * Brand: Wabco * Dual-line brake system as per EU with EBS, automatically load-dependent control * Spring-operated parking brake acting on 2 axles * Interchange-proof coupling heads fixed to the front cross member, no connection to towing vehicle Lighting System: * As per EU regulations, 24V, * Multi-chamber rear lights, * License plate lights * LED side marker lights * LED front position light (white) and rear track lights * 15-pin socket and 2x7-pin sockets fixed at the front cross member, no cables to towing vehicle Load Securing: * 9 pairs of foldable lashing rings evenly distributed, approx. 8 t pulling force * 8 pairs of foldable lashing rings evenly distributed, approx. 2.5 t pulling force * 2 pairs of foldable lashing rings at the rear, approx. 2.5 t pulling force * External frame with holes approx. every 500 mm for tie-down straps Stake Pockets: * 16 plug-in stakes approx. 100/40 mm, usable length approx. 800 mm Stake Pockets: * 8 per side integrated into the outer frame * 4 rows of stake pockets transverse to the loading area Floor: * Approx. 28 mm Z-grade hardwood floor recessed into the outer frame Front Wall: * Solid front wall * Depot for 16 plug-in stakes approx. 100/40 * Front wall bolted to the top frame Equipment: * 2 wheel chocks with holders * 2x PVC toolboxes, approx. 600/400/500 mm * Holder for beacon light at rear incl. lamp * 2 LED reversing lights (rear) * 2 aluminum loading ramps, dimensions approx. 1,550 x 400 mm, load capacity approx. 4,000 kg/pair * Wheel load

Condition: used, maximum load weight: 32,610 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2023, next inspection (TÜV): 11/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete selection of vehicles with immediately and short-term available units on our website. Sample from the equipment list. Full equipment details available upon request. Dcodpfx Answyhy Esfjg Chassis: * Welded construction made from high-quality steel profiles with through-profile cross members, designed for high point loads. Coupling Device: * 2-inch king pin Underrun Protection: * Bolted version, compliant with EC regulations Side Impact Protection: * EC compliant Landing Legs: * 2 x 12 t landing legs with compensating foot and one-sided operation on the right hand side (FR) Axles: * 3 x 9 t air suspension axle assemblies * Disc brakes * Brand: Gigant Brake System: * Dual-line compressed air brake system compliant with EC regulations, equipped with EBS and RSS, automatic load-dependent control * Spring brake cylinders as parking brake * Foolproof coupling heads permanently mounted on front crossmember, without connection line to tractor unit * Brand: Wabco Tyres: * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120 Mudguards: * EC compliant, PVC mudguards in front of and behind the axle assembly Spare Wheel Carrier: * 1 piece double basket with mounting hardware for one spare wheel with ET 120 Load Securing: * 9 pairs of foldable lashing rings, evenly distributed, tensile force approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, tensile force approx. 2.5 t * Drill holes for tie-down straps approximately every 500 mm on the outer frame Front Wall: * Reinforced steel construction, fixed * Interior lined with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor set in outer frame Lighting System: * EC compliant, 24 Volt, with multi-chamber lamps * LED side marker lights * LED front position lights (white) * LED rear outline marker lights * Number plate lights * 1x 15-pin and 2x 7-pin plug connectors on front crossmember Paintwork: * Chassis and front wall sand-blasted, primed and painted in single color * Chassis: RAL 3002 carmine red * SSV: aluminium anodized * Underrun protection: white RAL 9010 * Attachments: galvanized/KTL black * Wheels: silver Including Special Accessories: * First axle liftable with fully automatic, load-dependent lift control * 10 pairs of stake pockets in outer frame, evenly distributed * 4 rows of stake pockets crosswise to loading area * 20 stakes made of galvanized pipe 80/50, total length approx. 1,000 mm * Storage magazine for 20 plug-in stakes on inner front wall * Twistlocks for 1 x 40’ and 2 x 20’ containers, flush-mounted at the rear * Twistlocks for 1 x 20’ container in middle position * Work light on lamp bracket (switched via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment. Full equipment details on request. Chassis: * Welded construction made of high-quality steel profiles with punched profile cross members, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile Dcsdpfx Anjugqvfsfjg * Wear plate approx. 8 mm * Neck height at the front approx. 130 mm Towing Device * 2” kingpin Underrun Protection * Bolted version, compliant with EU regulations Side Guard Protection * EU-compliant, made of anodized aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating foot and single-side operation on the right (FR) Axles * 3 x 9 t air-suspension axles * 22.5" disc brakes * Total lift approx. 180 mm * Lift and lowering mechanism operated via rotary slide valve Braking System * Dual-line pneumatic braking system (EU compliant) with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Anti-swapping coupling heads firmly mounted on the front cross member, no connection line to the tractor Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120 * Make of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN-bus system Mudguards * EU-compliant Spare Wheel Carrier * None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.0 t * Approx. every 400–600 mm in the external frame, holes for attaching tension straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior panelled with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z hardwood floor, recessed in the outer frame with galvanized omega steel profiles Lighting System * EU-compliant, 24 volts, with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline marker lights at the rear * Number plate lights * Lane marker lights LED * 1 x 15-pin and 2 x 7-pin connectors at the front cross member Equipment * 2 wheel chocks with holder * ECE 70 warning plates * Beacon mounting bracket incl. rotating beacon * 2 rubber buffers at the rear * Folding and extendable rear access ladder on the right (without platform) * 1 open perforated sheet box, crosswise to direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind the axles Paintwork * Front wall: RAL colour of your choice * Chassis: hot-dip galvanized * Outer frame: hot-dip galvanized + RAL colour of your choice * Side underrun protection: aluminium, anodized; underrun guard: white (RAL 9016 traffic white) * Add-on parts: galvanized / black KTL coated * Rims: silver * Contour marking: complete yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets crosswise to the loading area * 20 stakes made of galvanized 80/50 tube, total length approx. 1,200 mm * Magazine for 20 plug-in stakes inside the front wall * Container locks for 1 x 40' and 2 x 20' containers, rear flush * Container lock for 1 x 20' container in the center * Working headlight at the lamp support (switched via reverse gear) * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm, one each on left and right

Condition: used, functionality: fully functional, machine/vehicle number: 13182, Year of construction: 2021, operating hours: 1,401 h, load capacity: 1,300 kg, lifting height: 3,010 mm, free lift: 920 mm, fuel type: electric, mast type: duplex, construction height: 2,000 mm, drive type: Elektro, Electric 3-wheel forklift Chassis number: 13182 Mast type: Duplex Condition: Refurbished without warranty Technical condition: good Description: Toyota 7FBEST13 No.: R0579 Year of manufacture: 2021 Fast and uncomplicated transport possible by arrangement! The advertisement is merely for the identification of the device! An exact description of the condition as well as possible equipment will be provided individually upon request! Errors and prior sale excepted, sale only to commercial customers.. every sale of used goods is made with exclusion of warranty and/or guarantee. If you have not found your forklift, please contact us. We have a wide selection of other machines on site. The machine is visually in good and technically in good condition. Dedpfx Ajwp Uxajnfscg Sideshift, 3rd valve,