Used Suga Upper Support for sale (16,190)

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Lsdpfx Aevvkipeh Seru

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 15,000 kg, maximum load weight: 12,900 kg, empty load weight: 2,100 kg, loading space volume: 18 m³, loading space width: 2,380 mm, loading space length: 6,000 mm, loading space height: 1,250 mm, Dear Sir or Madam, We are offering a new 18 m³ container for sale, manufactured in our own production facility. The container features the following: - Manufactured according to DIN 30722-1 - Lifting bracket, 50 mm diameter - Hook height 1570 mm - Internal length 6,000 mm - Internal width approx. 2,350 mm - Internal height 1,250 mm - Floor made of 5 mm S-235 steel - Side walls, front wall & rear doors made of 3 mm S-235 steel - Sheets and profiles continuously welded - Distance between side supports every 750 mm - Distance between floor supports every 750 mm - Upper frame – round tube, 89 mm diameter - All-round net hooks Lrodpfx Aho Aay Ipe Sou - External rollers, greaseable and replaceable - Warning marking according to § 32 (1) StVO & DIN 67520 - Total weight 15,000 kg - Tare weight approx. 2,100 kg - Payload approx. 12,900 kg - Complete primer coating - 1K paint finish in RAL 7016 anthracite - Portal doors including central locking and additional locking according to UVV - Including type plate and container inspection according to DGUV rule 114-010 (formerly BGR 186) - Immediately available - Unit price €5,100.00 plus VAT Nationwide delivery is possible for an additional charge. If you are interested in other roll-off container products, please do not hesitate to contact us.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 97700 € 1846.53 € 2550 mm 15 mm 15 mm 13 mm 12 mm 12 mm Lrsdpfx Asypbp Doh Ssu 10 mm 270 mm 270 mm 230 mm 50 mm 1155 mm 15 kW 4760 mm 1660 mm 1155 mm 8950 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 50500 € 954.45 € 3100 mm 10 mm 6 mm 50 mm 13 1/min 1.5 ° 16 22 to 1000 mm 200 mm/s 22 kW 200 l Lrsdpfx Ahjwiqxce Ssu 2 Stk. 865 mm 580 mm 3515 mm 4200 mm 2250 mm 3600 mm 2100 mm 9300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules WE HAVE MORE THAN 850 REFERENCES!

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 112500 € 2126.25 € 3100 mm 16 mm 16 mm 13 mm 16 mm 14 mm 12 mm 300 mm 300 mm 240 mm 50 mm 1140 mm 18.5 kW 5310 mm 1660 mm 1140 mm 11100 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation Ljdpfx Asynm Hfeh Ssru adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity

Condition: excellent (used), Year of construction: 2009, Weeke BHX 500 – Operator Side Right Weeke Machining Center, each with one machining support above and below Infeed table with automatic workpiece feeding and positioning WORKPIECE DIMENSIONS Min. workpiece length: 200 mm Max. workpiece length: 2,500 mm Min. workpiece width: 70 mm Max. workpiece width: 1,000 mm Min. workpiece thickness: 8 mm (2*4 mm) Max. workpiece thickness: 80 mm Max. workpiece stacking: 2 pieces Machine configuration: 2V21 HIGH SPEED 7500 Vertical drilling unit arranged in both upper and lower machining supports, each with 21 drilling spindles (individually controllable with variable speed range). 2H4X/1Y Horizontal drilling unit arranged in both upper and lower machining supports, each with 10 spindles individually selectable via program. Each with 8 drilling spindles: in X-direction Each with 2 drilling spindles: in Y-direction N2 X-Y 90° Grooving saw unit arranged in both upper and lower machining supports for machining operations in the X-Y direction, swiveling 90°. Cutting depth: 30 mm Ledpox S Hzlsfx Ah Soru ADDITIONAL NOTE ON GROOVING SAW BLADE The saw blade width can be 8.4 mm. The cutting cross-section must not exceed 70 mm². F2-ETP-6 KW Milling unit arranged in both upper and lower machining supports, suitable for receiving shank tools. Manual tool change. Tool clamping: manual, Hydro quick-clamping system ETP 25 Rotation direction: right/left Speed: 6,000 – 18,000 rpm, stepless programmable Machining up to 3,000 mm Infeed table with automatic workpiece feeding and positioning Workpiece discharge area with cross belt conveyor and lifting arms – Workpiece length measurement in the machine – Movable operator terminal – Barcode software incl. scanner

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 62500 € 1181.25 € 40 to 1250 mm Y1 / Y2 / X und R Achse 200 mm 1050 mm 250 mm 440 mm servomotorischer Spindela 115 mm/s 10 mm/s 115 mm/s 650 mm 250 mm 1000 mm 7.2 kW 1950 mm 1450 mm 2650 mm 3600 kg servomotorized spindle drive 4 axes (Y1, Y2, X and R) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws quick release upper tool clamping upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules users manual in English or German ADVANTAGES OF THIS CONCEPT: - higher productivity as classic hydraulic press brakes, by nearlyinstantaneously reaction on foot pedal signal -low energy consumption - compact motor-spindle unit with small amount of components -no hydraulic components Lrodpfxeynm Ayo Ah Seu OPTIONAL EQUIPMENT (PRICES ON REQUEST): Z1/Z2-axes CNC control DELEM DA-66S or DA-69S

Condition: excellent (used), Catalog number: 7715 TECHNICAL DATA - Max. width of workpiece: 220mm - Max. height of workpiece: 130mm - 8 spindles: 1) Horizontal, lower: 220mm, 5.5kW 2) Vertical, right: 130mm, 7.5kW 3) Vertical, left: 130mm, 7.5kW 4) Vertical, right: 130mm, 5.5kW 5) Horizontal, upper: 220mm, 11kW – 5th spindle adjustable electrically, up/down 6) Horizontal, lower: 220mm, 5.5kW 7) Horizontal, lower: 220mm, 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal: 220mm, adjustable 360°, 7.5kW - All spindles adjustable, up/down, left/right - Spindle diameter: 40mm – Top: - 6 infeed rollers, double-toothed, pull-type + 1 single - 3 outfeed rollers, pull-type, rubber, smooth, double + 3 single - Meter counter – Bottom: - 1 infeed roller, toothed, pull-type, swiveling in the lower table - 3 metal outfeed rollers, pull-type, smooth - Feed on Cardan shafts - Rollers with pneumatic pressure - Stepless feed speed adjustment + 2 speeds, 10-60m/min - Feed motor: 10kW - Electric adjustment of planing thickness - Body lifting motor: 0.75kW - Central lubrication of the table - Diameter of dust extraction nozzles: 5x140mm, 3x120mm - Machine dimensions (L/W/H): 4680x1780x1850mm - Control cabinet dimensions (on pallet): 1020x1000x2230mm - Weight: approximately 5000kg Lrsdszx Rlxspfx Ah Ssu ADVANTAGES - 8 heads - Universal spindle - Ideal for both wet and dry wood - German production, WEINIG brand - Unpainted - Very few operating hours - Used planer, in perfect condition Net price: 125900 PLN Net price: 29280 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 107000 € 2022.3 € 3100 mm 13 mm 12 mm 8 mm 13 mm 10 mm 10 mm Lredpfx Ahoypbqhe Sju 8 mm 270 mm 270 mm 230 mm 50 mm 1155 mm 15 kW 5310 mm 1660 mm 1590 mm 10050 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity

Condition: new, Working width 4000 mm Working height 2600 mm Number of cylinders 6 St. Dimensions (L/W/H) 5300 x 1250 x 3330 mm S&S frame press type RP 2000, ----- C E - version Stable frame welded construction made of thick-walled special hollow profiles, Sliding carriage and pressure bar with 50 mm hole pattern. Continuous abutment on the left for width compression, lower abutment in two levels. Vertical press cylinder on special pressure bar with one-hand quick adjustment with weight compensation in the 50 mm hole pattern, height-adjustable, long Sliding carriages ensure the permanent absorption of high pressing forces. Fast, smooth width adjustment with ball-bearing carriage Central locking, fixation in 50 mm hole pattern. Upper horizontal press cylinder infinitely adjustable in height and with Equipped with counterbalance. Lower horizontal press cylinder with center holes for the two Abutment levels, with weight compensation. Abutment and pressure plate depth 100 mm Printing plate and support width 130 mm Machine electro-hydraulically controlled, with 2 vertical pressure cylinders d = 50 mm, stroke 120 mm double-acting, with counterweight and One-hand quick adjustment, 2 pieces Horizontal pressure cylinders d = 40 mm, stroke 120 mm double-acting, with weight balancing; 2 manual control valves, Pressure gauge, 1 pressure control valve from 20 to 125 bar corresponds to 400 to 2400 kg pressure vertical, with 3 kW three-phase motor for 400 volts, 50 Hz operating voltage. Complete with electrical connection. Paint finish: RAL 7035 light gray with RAL 7016 anthracite grey Working size: 4000mm x 2600mm (length x height) Required space: 5300 x 1250 x 3330 mm (L x W x H) Machine including the following options: ----- Article .00 pc Medium pressure bar with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2600 mm high Article .00 pc Individual pressure control for medium pressure bar, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Cross printing device complete with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve There is no weight compensation on the lower horizontal cylinder Lredpfx Aju Uvaloh Seu Article .00 pc Individual pressure control for transverse pressure device, Pressure control range up to max. 100 bar (for pressing crossbar windows) Article .00 pc Shut-off valve on the 3rd vertical cylinder Article .00 pc Shut-off valve on the upper horizontal cylinder Article .00 pc Width allowance for compression of small frames to bridge the 1st pressure beam, including shut-off valve on the 1st vertical cylinder Article .00 pc Basic equipment for counter profiles The space required in height increases by 100 mm Item All pressure plates and abutments covered with plastic Article .00 pc Triangle studio window pressing device consisting of: locking device of Vertical pressure bar and 3 attachable, side-guided pendulum pressure plates Article .00 pc double pendulum pressure plate for pointed windows (triangle) ----- Total price in the above version ex works: On request! ----- Options: Article ....

Condition: good (used), DREISTERN P3.100.40/3 Profiling Line – 44 driven stations with flying shear Short title for platforms with character limitations: DREISTERN P3.100 Profiling Line, 44 Stations + Shear Platform Data * Machine Type: Profiling Line / Roll Forming Line * Manufacturer: DREISTERN-WERK * Model: P3.100.40/3 * Year of Manufacture: 2002 Ledpfx Ahszzyd Ae Soru * Factory Number: 02 098 * Order Number: 38933-46 * Condition: Used, disassembled * Control System: Not available For sale is a comprehensively equipped DREISTERN profiling line, type P3.100.40/3, with 48 stations, 44 of which are driven, as well as an inline shear (“flying shear”). The line features quick-change plates, mechanical quick clamps, and a coolant piping system. Due to the large number of profiling stations, it is particularly suitable as a mechanical base for demanding, customer-specific roll forming applications. An expansion with additional stations is structurally possible. According to the previous operator, the line operated flawlessly until it was disassembled at the customer's plant. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine Bed and Drive * Production direction: from right to left * Center distance: 330 mm * 48 stations total * 44 stations driven, with 44 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping system * 1 × Baumüller DC motor, 42 kW * 1 × Baumüller DC motor, 15 kW Profiling Frames * Number included in scope of supply: 44 pieces * Tool width per frame: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with keyway * Lower shaft mostly fixed; 6 frames with adjustable lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:21 * Lower/upper shaft ratio: 1:1 Inline Shear * Travel path: 1,900 mm * Profile rail guidance * Ball screw drive * Bosch servo motor * Valve block with punching unit * Folding table length: 3,000 mm * Emergency stop Scope of Supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Straightening device * Belt filter unit, 800 liters * Hydraulic unit for the shear * 44 gearboxes * 44 profiling frames * 2 Baumüller DC motors * 66 universal joints * Inline shear according to the above description

Condition: good (used), DREISTERN P3.100 Profiling Line – 16 driven stations and 2 × 18.5 kW Short title for platforms with character limits: DREISTERN P3.100 Profiling Line, 16 driven stations Platform data * Machine type: Profiling line / Roll forming line * Manufacturer: DREISTERN * Model: P3.100 * Year of manufacture: not known / to be added before publication * Condition: used, dismantled * Control system: not available For sale is a DREISTERN profiling line, type P3.100, with 18 stations, 16 of which are driven. The line is equipped with 16 profiling stands, 50 mm working shafts, quick-change plates, and two Bosch motors, each with 18.5 kW. The modular design with mechanical quick clamps and quick-change plates is suitable as a solid mechanical base for customer-specific roll forming applications. A constructive expansion with additional stations is possible. According to the previous operator, the line operated flawlessly until it was dismantled at the customer's site. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine bed and drive * Production direction: from left to right * Axle distance: 330 mm * 18 stations in total * 16 stations driven, with 16 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping * 2 × Bosch motor, each 18.5 kW Profiling stands * Number in scope of supply: 16 pieces Lrsdpfszzyd Njx Ah Seu * Tool width per stand: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with groove * Fixed lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:7.5 * Lower/upper shaft ratio: 1:1 Scope of supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Special straightening device * 16 gearboxes * 16 profiling stands * 2 Bosch motors, each 18.5 kW * 32 universal joints

Condition: used, clear span: 3,600 mm, load per truss pair (max.): 3,300 kg, Technical data for the pallet racking crossbeam: Racking system: Bito Type: PL 38 Included in the scope of delivery: 01x Pallet racking crossbeam, used Material color: green Ljdpfx Aez Ayyaeh Seru Box profile: 142 x 50 mm Crossbeam type: PT36.142SN Clip: 3 HK (hooks) Clear width: 3,600 mm Maximum load per crossbeam pair: 3,300 kg, with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports against unintentional lifting Note: 4-5 drill holes in the upper box profile General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location or scope of delivery.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. Lsdpfozz Rpcjx Ah Ssru - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: new, Year of construction: 2026, sheet width 3100 mm plate thickness 9 mm pre-bending 6 mm diameter of upper rolls 220 mm diameter of lower rolls 200 mm side roll diameter 170 mm min. dia. 250 mm roll speed 6 m/min total power requirement 10,3 kW weight of the machine ca. 4651 kg dimensions of the machine ca. 4915 x 1120 x 1235 mm Features - Machines include the following DAVI standard specification: The components of the machine structure (machine stand, frame and swivel bearings, etc.) have been calculated and designed to withstand the loads required for the applications and performance levels. The robust and heavy-duty machine construction absorbs the loads generated during the bending process without transferring them to the foundation. - High-quality surface finish: For forming delicate surfaces and/or soft materials without leaving marks Hydraulic-mechanical parallelism system, supported by electronics for fine-tuning. There are two INDEPENDENT & SYMMETRICAL hydraulic circuits for the left and right cylinders of each roller. The oil flow is regulated by two DOUBLE PUMPS, which are mounted on the same motor shaft and are fully synchronised. The two symmetrical hydraulic circuits move the cylinders and supply the rollers with the SAME amount of oil in a fully synchronised manner. Electronic control is activated only for extremely precise fine-tuning. - Smooth transmission of the drive Both the hydraulic motors and the gearboxes (top and bottom) can follow the deflection of the roll without load when bending narrow sheets. This ensures perfectly symmetrical deflection of the rolls under load. This system also allows the rollers to deflect freely, without the risk of breakage under excessive load. - ‘Roll-by-Wire’© digital technology Lredpfoz Dxpmox Ah Seu Since 2004, DAVI has revolutionised the way sheet metal rollers are wired (similar to ‘fly-by-wire’ technology in the aerospace, FMS and automotive industries) and introduced ‘Roll-by-Wire’ technology. This allows the entire control system of the roller to be controlled via digital signals rather than, as was previously the case, via numerous relays and contacts. Digital technology is much faster and more reliable. Action Benefit Reduction in the number -> Reduction in potential of components component failures Very compact design -> Improved accessibility for maintenance work Improved accessibility for -> Damaged parts can be identified maintenance work more easily More reliable -> Greater accuracy thanks to the use of ‘digital signals’ Permanent lubrication technology The lever-arm feed system eliminates all linear friction during the movement of the side rollers, as the roller support arms, which house the bushings, rotate simply and smoothly around two large, strong pivot points made of alloy steel, ensuring precise and friction-free rotation. This guarantees reduced wear and safety during unlimited use. Further advantages of the lubrication-free lever-arm feed mechanism are: •NO daily maintenance required (lower operating costs). •More production time available. •The bearings are sealed to protect against scale, dust and rust - Hardened rollers •Excellent heat tre...

Condition: used, mileage: 9,900 km, power: 120 kW (163.15 HP), first registration: 06/2026, fuel type: diesel, overall weight: 2,800 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, Internal Vehicle No.: 96451_1 Equipment Lines and Packages * MX0 BlueEFFICIENCY package * FP4 Chrome interior package * XZ2 Model generation 2 * JB7 Parking package with reversing camera * Z3K Pro Exterior * LB9 Exit lights * F68 Heated and electrically adjustable exterior mirrors * CF0 Basic suspension * E28 Additional battery for retrofitted equipment * IB6 C447 Vito/V-Class series * VV9 Mounting points in the roof frame * RG7 Tires 225/55 R17 * BB7 CO2-optimized braking system * E57 Electrical system for trailer socket * K51 Protection against misfueling * MG9 Generator management * XG6 Weight variant 2,800 kg * KB5 Main fuel tank 70 liters * W65 Tailgate * IL1 Domestic - code * ZM0 Panel van * IK0 Complete vehicle * HX1 Refrigerant R-1234yf * L45 Multibeam LED: High beam assist Adaptive plus * Z3T Premium complete wheel protection (3 years) * IN2 Wheelbase 3200 mm, long overhang * RD8 Full wheel covers * RF1 Tire manufacturer Continental (10) Lsdjzk Srkjpfx Ah Sjru * LG4 Tail, brake and indicator lights in LED technology * VV0 Welding nuts side panel for conversions * RS7 Steel wheels 6.5 J x 17 * E36 Battery separation relay with additional battery * LC8 Ambient lighting tailgate * H20 Heat-insulating glass all around Interior * F66 Lockable glove compartment * V3L All-weather floor mats * FS5 Illuminated vanity mirrors * LC7 Footwell lighting front * FJ3 Double cupholder center console * T75 Grab handles for driver and passenger entry * V43 Wooden floor * V20 Interior trim cargo area, upper panels * V30 Interior trim cargo area, side panels * HH4 Automatic climate control Thermotronic * SB2 Comfort co-driver seat * LC4 Comfort roof control panel * SB1 Comfort driver seat * LC2 LED light strip in the cargo area * CL3 Leather steering wheel * SE4 Lumbar support co-driver seat * SE5 Lumbar support driver seat * FF1 Center console with storage compartment * SK2 Driver seat occupancy recognition * SA2 Co-driver seat cushion depth adjustment * SA1 Driver seat cushion depth adjustment * VF4 Fabric Caluma black * D50 Partition wall, full height Multimedia * EL8 2-way front speakers * E1E Digital extra: Hard disk navigation * EW6 Digital extra: Remote Services Plus * E4S Digital extra: Smartphone integration * E1D Digital radio (DAB) * JK5 Instrument cluster with color display * JH3 Communication module (LTE) for digital services * EY2 Live traffic information * E7M MBUX multimedia system * ES9 Media Interface cable kit * EY5 Mercedes-Benz emergency call system Comfort and Environment * G43 9G-TRONIC * KP7 Exhaust gas purification SCR generation 4 * JB4 Active lane keeping assist * JW8 Attention Assist * E07 Hill-start assist * MJ8 ECO start-stop function * LA2 Driving light assist * LP1 Interior and ambient lighting panel van * 502 Intelligent speed assist (ISA) * F3Z Trunk comfort closing * CL1 Steering wheel adjustable in inclination and height * FY7 Multi-button remote control * C6L Multifunction steering wheel * LE6 Night lighting * MS1 Cruise control * JA7 Blind spot assist * JA9 Traffic sign assist * H12 Hot water auxiliary heater Safety * BA3 Active brake assist * SA6 Co-driver airbag * BB6 Brake force compensation in case of brake booster failure * B25 Electronic parking brake * J55 Seat belt warning for co-driver * BH1 HOLD function * RY2 Tire pressure monitoring front and rear, wireless * SH2 Thorax-pelvis sidebag co-driver * SH1 Thorax-pelvis sidebag driver * Y10 First aid kit * Y44 Warning triangle Condition/Documents * JX2 Maintenance interval

Condition: ready for operation (used), Year of construction: 2003, pressure 160 t chamfer lenght 4100 mm distance between columns 3100 mm dayligth 370 mm stroke of upper beam 200 mm throat 500 mm ajustment speed 100 mm/sec working feed 9.0 mm/sec return speed 86.0 mm/sec work height max. ca. 900 mm back stop - adjustable max. 500 mm Control CYBELEC oil volume 150 l total power requirement 15.0 kW weight 12000 kg range L-W-H 5100 x 2100 x 2750 mm Original price ~ 85.000 Euro From a maintenance workshop Well-maintained condition (!!) Includes optional equipment - in checked conditions - machinevideo - ?v=pleltYCkXDQ Equipment: - Electro-hydraulic CNC press brake - With DELEM CNC control unit Lrjdpfx Ajzrzt Heh Seu * Swiveling control panel (front right) * Tool & program library * Simple CNC programming - CNC-controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC motorized backgauge (X-axis) * With 4x manually adjustable stop fingers (Z-axis) - CNC motorized height adjustment (R-axis) - WILA CNC bed crowning system - WILA electro-hydraulic upper tool clamping * Incl. sectionalized set of 28° acute-angle punches * Incl. WILA hydraulic power unit - WILA manual lower tool clamping * Incl. die adapter rail (width 77 mm) * Incl. WILA tool holder (width 13 mm) - 2x sliding front support arms - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - 1x movable foot pedal - Operating manual

Year of construction: 2023, operating hours: 4,371 h, condition: ready for operation (used), travel distance X-axis: 460 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 660 mm, spindle motor power: 11,500 W, spindle speed (max.): 10,500 rpm, number of axes: 5, This 5-axis WALTER HELITRONIC RAPTOR DIAMOND was manufactured in 2023. It features a tool diameter capacity of Ø3-290 mm, with an optional extension up to Ø400 mm, and a maximum tool length of 270 mm. The machine is designed for the production and regrinding of carbide, HSS, PCD, and CBN tools. If you are looking to get high-quality grinding capabilities, consider the WALTER HELITRONIC RAPTOR DIAMOND cylindrical grinding machine we have for sale. Contact us for further details. • Operating hours: approx. 4,371 h • Working range: • Tool diameter: Ø3–290 mm (optional up to Ø400 mm, depending on configuration) • Maximum tool length: 270 mm (optional up to 350 mm, depending on configuration) • Maximum tool weight: 50 kg • Axes: • Number of CNC axes: 5 • Linear axis speed: up to 15 m/min • Spindle: • Max grinding wheel diameter: Ø200 mm • Interface: HSK • Belt-driven, double-ended spindle • Grinding / Eroding: • Grinding and EDM in one setup • For carbide, HSS, PCD, CBN tools • Configurable for up to 3 electrodes and 3 grinding wheels, or alternatively up to 6 grinding wheels • Control / Machine design: • WALTER / UNITED GRINDING CNC control • Enclosed working area with automatic protective door • Installed machine options/features: • Upper table • Glass scales • Reinforced A-axis, up to 750 rpm • Preparation for automatic calibration/probe • Grinding wheel measuring probe • Automatic fire suppression system with leak detection • TS-Remote Ready • Keyboard support • Oil leak sensor • Connection for external filtration system Additional equipment Ljdezxg Tfepfx Ah Soru • Automatic loading/manipulator system for shank tools (automatic tool loader/manipulator) • Process cooling system • Coolant/dielectric filtration and circulation system • Coolant/dielectric system • Tool holders • Flanges/adapters • Grinding wheel/electrode accessories • Automation/handling: • TOP loader • 12 pallets • Filtration/cooling/extraction: • Oil mist extraction system • Extraction silencer • Oil cooling unit • Filtration system with tank and pump • Workholding/tooling: • Collets 6–16 mm • Collets 16–32 mm • 351 ES collets: 6, 8, 10, 12, 16 mm • 4 x 351 ES collet sets • Collets: 6, 8, 10, 12, 14, 16, 18, 20, 25 mm • Automatic holder 6–16 mm • Automatic E386 holder, 16–27 mm • Manual hydraulic holder, diameter 32 mm • ISO 50 socket • ISO 50 arbor • 2 x 50 mm HSK electrode holders • 4 x 45 mm HSK grinding wheel holders • Grinding wheel holder for dressing • Grinding wheel set measuring adapter • HSK calibration disc • Calibration roller • Measuring: • Heliset Plus measuring device • Software/options/packages: • Tool Studio for PC • Tool Studio Step Tools • 45-degree P-System sharpening option • P36 wood drill tooling package • Drill package • Hoger P58 package • Consumables: • 4 x 208 l dielectric fluid

Condition: new, Number of motors 1 Stück 0 , mm Control , 0 cutting width 115 und 82 mm Cutting height 55 mm Motor output 2.0 kW machine weight ab. 45 kg Graule KS crosscut saw for cutting (glass) beads with a rebated joint with manual and electronic length stop Suitable for wood, PVC, aluminum ----- Brief manufacturer's description: - Crosscut and miter saw for precise and user-friendly cutting to length in the strip area - Sturdy gray cast iron construction - A double ball-bearing axle acts as a pivot point below the material support table, facilitating material cutting. The cut is always made at the rear top. - Quick miter adjustment up to 45° - Readjustable fixed stops at 90° and 45° - Upper saw blade guard can be connected to extraction system ----- Technical data: Motor: 400 V / 2.0 kW Speed: 2,800 rpm Max. cutting width: 115 mm (at 90°); 82 mm (at 45°) Max. cutting height: 55 mm Mitre range: 45° - 90° - 45° Saw blade diameter: 250 mm Extraction nozzle diameter: 45 kg ----- Technical description: Item 1.1 Crosscut and miter saw type KS, 2 kW, 400 V, 30/40 mm saw blade holder Item 1.2 Pivot point LEFT Item 1.3 Pneumatic material clamping for KS, on both sides of the saw blade, 2 horizontal pneumatic cylinders, controlled via roller valve during saw stroke, can be switched off Item 1.4 HM circular saw blade for wood 250 x 2.8 x 40 mm 80 teeth neg ----- ----- Price of the above machine on request! Plus packaging and shipping ----- Options with additional charge: Item 1.5: EUR 1,270.00 Digital electronic angle display for one axis, crystal display, 1.5 V battery power supply, reading via magnetic tape and magnetic sensor, resolution 0.1° Item 1.6: EUR 695.00 Machine stand for KS crosscut saw ----- Item 2.1: 7,290.00 Electronic length stop with support plate EUR Electronic length stop type RLE 2.0 m – with support plate Mounting side: LEFT Electronic length stop system for cutting strips Travel distance 1.8 m, overall length 2.0 m 10" touch display, 230 V connection Feed speed 40 m/min Direct measuring system – repeat accuracy +/- 0.1 mm Working mode: (1) automatic absolute stop, (2) cutting lists, (3) pusher cutting lists, (4) step measurement, (5) fine adjustment Program memory for up to 999 cutting lists USB import and direct editing of cutting lists on the terminal Stop can be folded away to the rear Lrsdpfjy T R Sqox Ah Seu With support foot Item 2.2: 295.00 EUR Support 2 m, right, 110 mm wide, with support ----- Item 3.1: EUR 600.00 Manual length stop Length stop 2 m, left, with 110 mm wide support, with scale, foldable stop slider and support Item 3.2: EUR 295.00 Support 2 m, right, 110 mm wide, with bracket ----- (Technical data according to manufacturer - no guarantee!) All prices quoted are net. Plus statutory VAT.

Condition: new, Year of construction: 2026, pressing force: 220 t, Equipment: documentation/manual, safety light barrier, New, immediately available, top-spec CNC press brake YAWEI PBH220/3100-7C - Pressing force: 2200 kN - Max. bending length: 3100 mm Lredpozyafksfx Ah Sju - Year of manufacture: 2026 - CNC-controlled hydraulic crowning - Cybelec DELEM DA66 control system - WILA upper tool clamping - Controlled axes: X, R, Y1/Y2, Z1/Z2, Delta X - Servo bending aid (up to 200 kg) - 60 mm table with 13.5 mm x 22 mm slot for insert dies - 2 front support arms, adjustable on linear guides - CE compliant with Fiessler AKAS IIF (automatic height adjustment) - 24-month warranty - Commissioning and training included

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. Ledpfx Aez Agv Uoh Ssru - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each Lrsdpjz Agw Esfx Ah Sou - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. Lrsdpfx Aez Ag Rrsh Seu - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, mileage: 390,028 km, power: 331 kW (450.03 HP), first registration: 01/2023, fuel type: diesel, empty load weight: 8,543 kg, maximum load weight: 11,957 kg, overall weight: 20,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, color: red, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2022, number of seats: 2, Equipment: ABS, air conditioning, cruise control, hydraulics, navigation system, parking heater, Color: Red, Unladen weight: 8543 kg, Gross vehicle weight: 20500 kg, 1st axle: 385/65 R22.5, 2nd axle: 315/70 R22.5, Seats: Velour, Suspension: Leaf spring/air suspension, Retarder, Digital tachograph, Trailer coupling: FISCHER SK-S36.20 2/150, -660 mm, EBS - Electronic Braking System, ESP - Electronic Stability Program, Automatic air conditioning, Auxiliary heater, Adaptive Cruise Control ACC, Parking heater with automatic preselection, Seat heating, LED headlights, Headlight cleaning system, Automatic lights, Headlight leveling, Radio, Bluetooth audio streaming, GSM preparation Bluetooth, Rain sensor, Multifunctional leather steering wheel, Mechanically adjustable steering column, Lumbar support, Theft alarm, Electric window lifts 2x, Sunroof, Roof spoiler, Fog lights, Electric and heated exterior mirrors, Electric curb mirror, Wide-angle mirror, Hill start assist, Central locking with remote control, Wind deflector, Refrigerator, Axle load indicator, Work lights, Hill Hold Control HHC, LED daytime running lights, Connection plug 1x15 pin, Floating function, Telematics system, Side skirts, Upper and lower bunk, Cab suspension, SCR, Smart tachograph 2, Ambient lighting, Rema connection Lredpfx Aoz Eckqsh Sou

Condition: used, mileage: 432,977 km, power: 331 kW (450.03 HP), first registration: 01/2023, fuel type: diesel, empty load weight: 8,543 kg, maximum load weight: 11,957 kg, overall weight: 20,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, color: red, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2022, number of seats: 2, Equipment: ABS, air conditioning, cruise control, hydraulics, navigation system, parking heater, Color: Red, Unladen weight: 8543 kg, Gross vehicle weight: 20500 kg, 1st axle: 385/65 R22.5, 2nd axle: 315/70 R22.5, Seats: Velour, Suspension: Leaf spring/air suspension, Retarder, Digital tachograph, Trailer coupling: FISCHER SK-S36.20 2/150, -660 mm, EBS - Electronic Braking System, ESP - Electronic Stability Program, Automatic air conditioning, Auxiliary heater, Adaptive Cruise Control ACC, Parking heater with automatic pre-selection, Heated seats, LED headlights, Headlight cleaning system, Automatic lights, Headlight leveling, Radio, Bluetooth audio streaming, GSM preparation Bluetooth, Rain sensor, Multifunctional leather steering wheel, Mechanically adjustable steering column, Lumbar support, Anti-theft alarm, Electric windows 2x, Sunroof, Roof spoiler, Fog lights, Electric and heated exterior mirrors, Electric curb mirror, Wide-angle mirror, Hill start assist, Central locking with remote control, Wind deflector, Refrigerator, Axle load indicator, Work lights, Hill Hold Control HHC, LED daytime running lights, Connector 1x15 pin, Ferry coupling, Telematic system, Side skirts, Upper and lower bunk, Cab suspension, SCR, Smart tachograph 2, Rema connection, Ambient lighting. Lsdjz Eckwspfx Ah Ssru