Used Technolit Profimat 170 Plus for sale (7,232)

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You will find our entire inventory of immediately and short-term available vehicles on our website. For a complete list of equipment, please enquire. SPECIFICATION: GOOSENECK: * Gooseneck in SNT design for improved platform length, approx. 3,700 mm long, rear with approx. 1,000 mm x 6° taper * For tractor units: 4 x 2 and 6 x 2 * ASPÖCK-UNIBOX * On the gooseneck and rear taper: open grating with 5 mm steel reinforcement * 2-inch kingpin * Guide plate from gooseneck for the fifth wheel, approx. 500 mm wide * Round NATO connector on the front panel (Maeler & Kaege VG 96 917) * On the gooseneck: 1 pair of removable ALU side panels, approx. 400 mm high, anodized finish * 1 LED work light each, left and right, mounted at the top of the front wall, wired to the coupling panel for the tractor unit CARGO AREA: * Platform length approx. 9,600 mm, with rear slope approx. 900 mm x 6° * Hydraulic lift/lowering section after gooseneck, length approx. 3,000 mm, rated for up to approx. 9,000 kg * Continuous open grating on lift bed and platform with approx. 5 mm steel underlay for reinforced point loading TYRES: 235/75 R17.5, 3PMSF, twin tyres. Make at our discretion * TPMS tyre pressure monitoring system compliant with ECE R 141 AXLES: * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steerable Nwsdpfxjy Auhhe Anfsf * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * 1st axle with starting aid * Technical axle load: 12,000 kg per axle * Air suspension with raise/lower valve HYDRAULIC LOADING RAMPS: * 1 pair of AXS steel ramps, two-part, open grating surface, length approx. 4,920 mm, width approx. 900 mm * Hydraulically folding ramp tips * Each ramp hydraulically adjustable by approx. 235 mm outward and approx. 365 mm inward * Strobe lights at ramp tips, switch positioned next to ramp controls * Ramp transport lock in driving position with quick-release * Painted non-slip coating on outer frame and ramp tip * Mechanical drop-leg side supports integrated in ramps, to assist with dock alignment * Ramp control valves on right side of vehicle BRAKE SYSTEM: WABCO EBS-E braking system, compliant with EU regulations SURFACE TREATMENT: * Entire chassis HRM metallized with ZINACOR 850 (85% zinc / 15% aluminium) for superior corrosion protection PAINTWORK: * Trailer body Carmine Red (RAL 3002) * Rims Silver Grey * Side walls Aluminium natural finish * Hub caps as per axle manufacturer * License plate holder Pure White (RAL 9010) EQUIPMENT: * Front wall made of steel, removable, approx. 1,600 mm high, incl. coupling panel for supply lines to tractor unit, mounted approx. 1,000 mm from the lower edge of the outer frame * Lashing chain anchor points inside left and right on front wall incl. aluminium trays below left and right for stowing chains or straps * Behind the front wall: approx. 12 mm thick DELIGNIT panel, bolted * Additional 2 pairs of bolted lashing rings (LC 5,000 daN) * Electric cable winch, approx. 5,400 kg pulling power, with remote control. Steel cable approx. 24 m long, 9.5 mm diameter, incl. cable pressure roller * Deflection pulley for the winch, with shackle and bolted lashing point

Condition: excellent (used), Year of construction: 1995, Usable work area with cutting head: 1000 x 1200 mm Usable work area with milling head: 950 x 1150 mm Nsdpfx Anowgkyzsfswf Cutting/milling speed: 10 mm/sec - 500 mm/sec Acceleration: up to 5 m/sec2 Mechanical/addressable resolution: 0.01 mm Static repeatability: 0.02 mm Software data format: ASCII/HPGL RS-232 interface or RS-232/USB converter Plotter input buffer: 16 kilobytes Power requirements: 230 volts +-10% / 50-60 Hz / 450 VA Software: CoCut trial version can be downloaded for free. Converter is missing to be able to mill.

Condition: used, Year of construction: 2012, CNC machining center Manufacturer: Unverzagt Model: UVA 550 Plus Year of manufacture: 2012 Control unit: Siemens 828D Njdewv Tm Nepfx Anfjwf Operating hours: approx. 3,000 Travel (X/Y/Z): 600 x 400 x 500 mm Tool stations: 20 Tool holder: SK40 Spindle speed range: 10,000 rpm Hexagon wireless probe Chip conveyor Spindle cooler IKZ (internal cooling system) 16426ä

Condition: good (used), Year of construction: 2001, machine/vehicle number: NN7716, Maximum book size: 40cm X 27cm, Minimum book size: 12 cm X 9,5cm Maximum book block size: 40mm, Minimum thickness book block: 3 mm, Max.speed 1500 p/h 4 Clamps, Milling, Back and side gluing with hot melt Nsdormkmropfx Anfewf

Year of construction: 2007, condition: excellent (used), RAS Turbo bend plus 62.25 New gearboxes fitted from Ras Bending length 2540mm / 2.5 metre Material thickness max 2.5mm Four extremely dynamic and fast ramp-driven movements under CNC System 6000 CNC touch screen – New control fitted in 2016 Extended back supports Light guards Portable tooling rack New / Year of manufacture 2007 Complete with: J shape back gauge Complete with segmented and straight tools and tooling rack Tooling (supplied with the machine): Standard ‘sharp’ upper tooling – 3x lengths 845mm Bottom tooling single length – 1x 2.54m length 10mm wide Nodjgd Dgqjpfx Anfjwf Bottom tooling single length – 1x 2.54m length 20mm wide Goats foot segmented upper tooling – 110 height section 200mm wide – 10 lengths 60mm – 1 length 55mm – 1 length 50mm – 1 length 45mm – 1 length 40mm – 1 length 35mm – 1 length 30mm – 1 length 120/90mm LH Box end – 1 length 120/90mm RH Box end – 1 length Segmented bottom tooling 200mm wide – 10 lengths 120mm – 2 lengths 60mm – 1 length 55mm – 1 length 50mm – 1 length 45mm – 1 length 40mm – 1 length 35mm – 1 length 30mm – 1 length Tool cart supplied

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, pressing force: 170 t, working width: 3,100 mm, working range: 3,100 mm, AMADA MULTI AXIS CNC 170 TONS X 3100 HYDRAULIC DOWNSTROKING PRESS BRAKE WITH AMADA OPERATEUR II 8 AXIS CNC CONTROL Description TYPE HYDRAULIC DOWNSTROKING CAPACITY 170 TONS CONTROL AMADA OPERATEUR II NO OF AXIS 8 INCLUDING Z1 AND Z 2 Nodpfov Iftgex Anfewf BENDING LENGTH 3100mm OPEN HEIGHT 450 STROKE LENGTH 180 THROAT DEPTH 410 MOTOR SIZE 15 KW FRONT GUARDING ERWIN SICK MACHINE MOUNTED ELECTRONIC GUARDS SIDE FENCING REAR INTERLOCKED WEIGHT 11 TONS

Condition: used, Year of construction: 2018, load capacity: 7,000 kg, fuel type: diesel, gearing type: automatic, Equipment: cabin, Manitou MRT 2470 plus Privilege #772691 in red Type: MRT 2470 Lifting capacity: 7,000 kg Power: 129 kW Color: red EXTRAS: Radio remote control included (see photo) Performance (Metric) Max. lifting capacity: 7,000 kg Max. lift height: 24.80 m Max. outreach: 20.50 m Dimensions l2 - Length to fork back: 7.55 m l1 - Overall length: 8.75 m b1 - Overall machine width: 2.49 m b7 - Overall width (stabilisers extended): 6.25 m h17 - Overall height: 3.05 m Wa3 - Outer turning radius (chassis): 6.50 m m4 - Ground clearance: 0.35 m a4 - Tilt angle: 12.30° a5 - Dump angle: 108.70° Standard tires: pneumatic Standard forks: 1200 x 130 x 60 mm Weight: 21,760 kg Stabilisers Type: Telescopic scissor supports Controls: Stabiliser operation, individual or simultaneous Drive Manufacturer: Mercedes Type / Emission standard: OM 934 E4-5 - Stage 4 / Final Tier 4 Power: 176 hp / 129 kW Max. torque: 750 Nm @ 1,500 rpm No. of cylinders / Displacement: 4 / 5,130 cm³ Injection: Direct Cooling: Water-cooled Transmission Type: Hydrostatic Tractive force: 9,500 daN Parking brake: Automatic negative Service brake: Hydraulic Hydraulics Pump type: Variable displacement Hydraulic flow: 180 l/min Pressure: 350 bar Nedpfx Anoytk Nbefowf Tanks Hydraulic oil: 290 l Fuel: 290 l Exhaust treatment fluid AdBlue: 57 l Noise emission and vibration Operator station noise level (LpA): 79.70 dB(A) Ambient noise level (LwA): 108 dB(A) Hand/arm vibration exposure

Condition: good (used), Year of construction: 2020, functionality: fully functional, For sale: WMF 5000-S-Plus fully automatic coffee machine. The machine is sold with all accessories shown in the pictures. Viewing is possible at any time by prior appointment, even at short notice. Nwodpfx Anow S T Htsfsf VAT can be stated separately!

Year of construction: 1999, condition: used, Used machine Year of manufacture: 1999 Large milling area despite compact design Copy milling using lateral stops or templates at a 1:1 ratio Pneumatic copy pin, two-stage, for two different cutter diameters The patented suspension of the copying lever ensures precise milling with minimal effort Table height adjustment for extremely high profiles up to 400 mm Easy tool change via spindle lock Pneumatic material clamping device Nsdpsxqihisfx Anfewf Metering spray unit Options: Copy templates milled for standard handle holes and PZ milling Copy pin Collet chuck Stop system Material clamping device with 2 clamping cylinders Milling cutter 8 mm Availability: short-term Location: Flörsheim

Condition: used, functionality: fully functional, power: 92 kW (125.09 HP), fuel type: diesel, color: yellow, overall weight: 14,800 kg, tire size: 10.00 x 20, number of seats: 1, Year of construction: 2022, machine/vehicle number: 2477168, Equipment: all wheel drive, cabin, Year of manufacture: 2022 Engine: 92 kW (Isuzu) Nodpfx Aey Hhkdonfswf Weight: 14.8 t Dimensions (L x W x H): 7.89 x 2.41 x 3.04 m Reach: 9.24 m Digging depth: 5.93 m Tyres: 10.00 x 20 Displacement: 2.99 l Boom: VA

Condition: good (used), Wilo ILE50-170 Glanded centrifugal pump Nwjdpfsw Dylnsx Anfjf Glanded centrifugal pump, with built in frequency converter for electronic control for constant or variable pressure, 8.6Kw, two in stock

Condition: excellent (used), Year of construction: 1995, Weinig Profimat 23E four side planer Nwjdpjibq Niofx Anfof - German production - year of production 1995 - right and left spindles with a face milling cutter ensuring parallelism and a right angle of 900 - element width measurement - electronic width adjustment TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm electronic planing width control 1 lower spindle 4 kW 2 right spindle 4 kW 3 left spindle 4.2 kW (face milling) 4 spindle right 4.2 kW (face milling) 5 upper spindle 7.5 kW element width measurement electric height adjustment of the feed rollers electric height adjustment of the upper spindle spindle diameter 40 mm six top steel rollers yen top roller, rubber one roll in the table top pulling pneumatic pressure feed on cardan shafts pre-table length 2470 mm diameter of nozzles 140 mm Machine dimensions 456x240x220 weight 4000 kg

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 3214, functionality: fully functional, workpiece height (max.): 40 mm, feed rate X-axis: 10 m/min, total height: 1,600 mm, total length: 3,700 mm, total width: 1,445 mm, overall weight: 1,080 kg, TECHNICAL DETAILS Feed speed: 10 m/min Panel thickness: 8 - 40 mm Max. edge thickness: 3 mm MACHINE DETAILS Operating length: approx. 100,000 m Nwjdey Hih Ropfx Anfef Dimensions & Weight Dimensions (L x W x H): 3,700 x 1,445 x 1,600 mm Weight: 1,080 kg EQUIPMENT/FEATURES PLC control including touchscreen Power stop/trimming knife Jointing unit with DIA milling tools Application of hot melt adhesive to workpiece Robust chain drive Upper operator panel, rapid adjustment from operator side Double roller pressure Signal lamp for workpiece feed Quick-heating glue pot, maintenance-free Pneumatic end trimming for edge thicknesses up to 3 mm High-frequency crosscut saw High-frequency milling unit with replaceable cutter heads For radius, straight and chamfer milling Workpiece air blower Integrated collection container for edge material offcuts Extendable support arm on the front side Note: The machine can still be inspected under power until the middle of calendar week 19.

Condition: used, fuel type: diesel, lifting height: 20,300 mm, Year of construction: 2014, Empty weight: 17.020 kg General condition: average Technical condition: average Visual appearance: average Nsdpfx Anjv Ti I Esfewf Delivery terms: EXW Please contact Christian Theißen for more information Manufacturer: Manitou Model: MRT 2150 Plus Year of build: 2014 Condition: Used Data: Max. lifting height: 20,32 m Lifting capacity: 4.999 kg Max. extension: 18,20 m Length forks: 1,20 m Drive type: Diesel Dimensions (without forks): LxB 6,89 x 2,43 m Building height: 3,08 m Rotation range: 360° (endlos) Own weight: 17.020 kg Total permissible weight: 17.400 kg Special features: All-wheel drive, all-wheel steering, connection for auxiliary equipment, supports, automatic attachment recognition. Location: 41468 Neuss immediately available

Condition: used, mileage: 295,913 km, power: 103 kW (140.04 HP), first registration: 02/2019, fuel type: diesel, overall weight: 3,500 kg, gearing type: mechanical, emission class: euro6, number of seats: 5, Year of construction: 2018, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, VW Crafter 2.0 TDI, medium wheelbase, with 5 seats, featuring: air conditioning, navigation, auxiliary heater with remote control, electric windows, tilting window in the second row of seats. - Special features: Nsdpfxoyt Uzzj Anfjwf Second battery with battery monitoring; driver and passenger airbags; passenger airbag can be deactivated; Discover Media audio navigation system (touchscreen color display); electrically adjustable and heated exterior mirrors; driver assistance systems: front and rear parking sensors; chassis: reinforced suspension and shocks; sliding windows in cargo/passenger compartment: front left and right; vehicle without cargo partition; Climatic air conditioning (driver’s cab) with second evaporator; side marker lights; smoker's package; spare wheel in matching tire configuration including on-board tools and jack; rear door hinges with increased opening angle; comfort seats for driver and front passenger; auxiliary heater with remote control; 4 x 12V power sockets in the cab; rear entry step integrated in bumper; half-height plastic cladding in the cargo/passenger compartment. Additional equipment: Convex exterior mirrors left and right; LED indicators integrated into exterior mirrors; rubber floor covering in cab; aerodynamic underbody paneling; dual headlights; twin-tone horn; grab handle on rear left and right roof pillars; hill start assist; brake assist system (HBA); crosswind assist; front electric window lifters; laminated safety glass windscreen; grab handles on A-pillars; rear wing doors without windows; LED interior lights in cab and cargo/passenger compartment; body type: standard panel van; roof type: standard roof; 75-litre fuel tank; front radiator grille with upper chrome trim; steering column (steering wheel) adjustable; headlight beam adjustment; N1 homologation (commercial vehicle registration); engine: 2.0 L - 103 kW TDI; rear fog light; wheelbase: 3640 mm; tire repair kit; low-emission as per Euro 6 emissions standard; right-side sliding door in cargo/passenger compartment; SCR system (AdBlue technology); electro-mechanical power steering; seat upholstery: fabric; 6.5x16 steel wheels; start/stop system; front bumper in grey with colour-coded trim; lashing points in cargo area; driver's seatbelt warning system; heat-insulating glazing; central locking with remote and interior actuation; permissible gross vehicle weight: 3.5 t. - Financing available via our partner banks. We are happy to assist you. Please note: subject to prior sale as this item is also offered on other platforms. Accessory specifications provided without guarantee. Changes, prior sale, or errors excepted. We offer and strongly recommend a viewing and inspection to ensure buyers have an accurate understanding of condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged.

Condition: good (used), Stacking boxes, plastic boxes, Euro stacking boxes, transport baskets, stacking baskets, Euro stacking containers, Euro stacking containers, small load carriers -External dimensions: 400 x 600 x 170 mm -Bottom and sides permeable Nwsdpfx Aneuzn Dlefef -Contents: 33 liters -Quantity: approx. 2050 pieces Minimum order quantity: 5 pieces -Piece: 4 euros net ex warehouse -For larger orders, price on request

Condition: used, Tenoning spindle 1 St. Number of milling agregates 1 St. Spindle diameter 40 mm Small-scale window manufacturing consisting of: ----- 1) Haberkorn FZS1 slotting machine. Price: €12,500 2) Okoma SF3F table milling machine with glazing bead saw. Price: €4 Oertli tooling for the Haberkorn and Okoma machines. Price: €7,500 1 set of wooden windows IV 68/78/88 and 1 set of wood-aluminum windows IV 68/78, manufactured in 2011 4) Götzinger OBM Plus corner hinge and olive drilling machine, Maco MultiMatic hardware. Price: €7 (Hardware can be converted for an additional charge upon request!) ----- Technical Manufacturer's Description: - Haberkorn FZS1 slotting machine with automatic feed, - Stepless height adjustment D 40 mm Crosscut saw: - Spindle arrangement: top - Three-phase motor: 3 kW - Spindle diameter: 30 mm - Speed: 2800 rpm - Saw blade diameter: 400 mm - Automatic brake with speed monitoring - Pneumatic horizontal positioning, manually adjustable - Guard and dust extraction hood with extraction port diameter: 100 mm Slotting spindle D 40 mm: - Power: 7.5 kW - Speed: 4200 rpm - Working length: 252 mm - Maximum tool diameter: 340 mm - 220 mm stroke, stepless height adjustment via Precision ball screws - Guard and dust extraction hood with extraction port diameter: 180 mm - Automatic brake with speed monitoring Studio table: - Swivel range +/- 65 degrees - Automatically changing counterweight (programmable) - Pneumatic clamp - High-precision electric degree indicator - Automatic length compensation - Counterweight at every angle setting in the cutting plane Optional equipment: - Laser for workpiece positioning - Pneumatic saw position Nwedpfx Aexa Hi Nenfof - Length stop LA 2500 mm + 1850 extension ----- 2) Okoma SF3F table milling machine with lifting spindle, 3 tools - Dust extraction ports 2 x 120 mm - Spindle length 270 mm - Counter gauge with fine adjustment and turret - Triple stroke, maximum stroke height 90 mm - Glass strip cutting saw with protective and extraction hood, 80 mm diameter - 8-roller feed unit with stand and hold-down arm, required for the glass strip cutting saw attachment - Pneumatically controlled dispensing unit for edge drive, speed 6000 rpm - 2 x 3 kW motors - Mounting diameter 30 mm ----- 3) Oertli tools for Haberkorn and Okoma machines - 1 set of wood window IV 68/78/88 - 1 set of wood-aluminum window IV 68/78 Tools are sold in the condition, scope, and with accessories as currently available in our stock. Note regarding window cuts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems mentioned and drawn. [Note regarding window cuts, tool drawings, and tool system listings:] ----- 4) Götzinger OBM Plus Corner Hinge and Olive Drilling Machine -Corner and scissor hinges + handle olive drilling -Vertical drilling unit with: -Quick-change drill head device -Pneumatic feed via foot valve -1x Olive drill head 24 mm -1x Double-head corner hinge -Maco MultiMatic fitting -1x Adjustable flip stop, left, with 6 stops -1x Adjustable flip stop, right, with 6 stops -1x Machine stand complete with storage tray -220/400 V, 60 Hz, 1.3 kW -1x Roller conveyor appr...

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Saw blade diameter: 290-300 mm Saw blade speed: 4750 rpm Motor power: 4.5/5.5 kW Motor speed: 2880 rpm Max. cutting width: 5300 mm Max. cutting height: 2100 mm Max. panel height: 2200 mm Max. processing thickness: 80 mm Small parts support: Yes Nodpfx Ansy Dkg Nofewf Transport dimensions approx. 7000 x 2000 x 2600 mm Weight approx. 1000 kg Availability: short-term Location: Röllbach

Condition: good (used), Year of construction: 2019, functionality: fully functional, Ice machine, flake ice machine Maja SA 170 used, fully functional. For technical data see the nameplate. No VAT can be shown due to differential taxation. No guarantee or warranty. Shipping on pallet (costs borne by the buyer). Test on site possible upon collection. Nwodpfxjy Hfwho Anfjf

Condition: used, mileage: 27 km, power: 125 kW (169.95 HP), first registration: 09/2025, fuel type: diesel, empty load weight: 2,425 kg, maximum load weight: 1,075 kg, overall weight: 3,500 kg, wheelbase: 4,215 mm, next inspection (TÜV): 09/2027, color: grey, driver cabin: other, emission class: euro6, number of seats: 7, loading space volume: 3.2 m³, loading space length: 3,820 mm, loading space width: 2,120 mm, loading space height: 400 mm, construction height: 2,250 mm, working width: 2,175 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, Navigation via smartphone interface, central locking with remote control, electrically adjustable and heated exterior mirrors, front electric windows, onboard computer, cruise control, multifunction steering wheel, rear parking sensors, spare wheel with matching tires, summer tires, heated windscreen, light and rain sensor, LED daytime running lights, radio with Bluetooth hands-free system, touchscreen, USB interface, Apple CarPlay, Android Auto, long wheelbase, heat-insulating glazing, storage package, tachometer, driver airbag, anti-lock braking system (ABS), traction control system (ASR), comfort seats, center armrest, driver comfort seat - height-adjustable with armrest and lumbar support, particulate filter, full service history, immobilizer, side marker lights, outside temperature display, power steering, vehicle with extended loading area, ladder rack, multifunctional double passenger seat, second row with 4-seater bench, interior pollen filter, electrically heated windscreen, rear window, overhead storage shelf, electronic brake force distribution, brake assist, height-adjustable steering column, model update (2), permissible total weight 3.50 t, flatbed body, front mud flaps, shift indicator, electronic stability program (ESP), body/chassis: double cabin flatbed (standard), wheelbase 4215 mm, drive type: front-wheel drive, 6-speed transmission Financing example * Cash price: 41,649.00 Euro * Down payment: 8,330.00 Euro * Term: 60 months * Net loan amount: 33,319.00 Euro * Effective annual interest rate: 5.99 % * Fixed borrowing rate p.a.: 5.83 % * Gross loan amount: 38,493.00 Euro * Monthly installment: 642.00 Euro Nwodpfx Asxca Nbsnfsf *Representative financing example from Santander Consumer Bank AG, Santander-Platz 1, 41061 Mönchengladbach, for private customers, with the dealership acting as a credit broker. Subject to credit approval. Information also corresponds to the 2/3 example in accordance with § 6a paragraph 3 PAngV. Over 150 transporters and buses in stock. Financing or leasing available via Santander Consumer Bank, Targo Bank or Auto Europa Bank, we are happy to advise you. This offer is non-binding, no guarantee for equipment details. Listed features may need to be checked separately. Subject to change, error, and prior sale. Delivery available at extra cost. Export license plates available on site. Trade-in of your old vehicle possible. Retrofitting of: - Tow bars also up to 3500 kg possible - Auxiliary heaters - Screen for reversing camera and/or navigation via smartphone (Android Auto) - Reversing system with rear camera - Workshop fittings - Cruise control - Retrofitting of a tail lift and further individual solutions for your business requirements available at extra cost.

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400 V Nwsdoyyk Tzspfx Anfjf Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening: 119.5 cm × 65 cm Condition: very good! Video of the machine in operation available upon request.

Condition: good (used), Year of construction: 2015, operating hours: 899 h, mast type: telescopic, lifting height: 10,650 mm, fuel type: electric, Year of manufacture: 2015 GVW: 4.900 kg Dimensions (LxBxH): 365 x 120 x 199 cm Lifting capacity: 200 kg Working height: 1.265 cm Technical condition: good Visual appearance: good Please contact Ton for more information Manufacturer: JLG Type: Toucan 12E Plus Year of manufacturing: 2015 Weight: 4.900 KG Hourmeter: 899 Drive: Electric, 4x2 Product number: 25041 Platform height: 10,65 m Working height: 12,65 m Platform measurements: 70x105 cm Maximum outreach: 6,7 m Total measurements LxWxH: 365x120x199 cm Max. platform load: 200 KG Machine is technically in good condition. Fitted with good batteries. Documents incl. CE. Price: € 17.950,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Nedpfeyywxdsx Anfowf Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Condition: used, Year of construction: 2021, total length: 7,010 mm, Articulated telescopic work platform Manitou 160 ATJ Plus Drive Diesel Year built 2021 Work height (mm) 16,210 Nwodpfx Aoy Abhzsnfjf

Condition: new, Year of construction: 2025, total length: 3,700 mm, Vertical mast platform JLG Toucan 12E Plus Drive Diesel Year built 2025 Work height (mm) 12,650 Nsdpfxoy Abhnj Anfowf

Condition: new, Year of construction: 2025, total length: 10,130 mm, Telescopic work platforms Nedpfoy Abgqex Anfowf Manitou 220 TJ Plus Drive Diesel Year built 2025 Work height (mm) 21,740