Used Titech Tomra Optical Separator for sale (9,758)

Year of construction: 2019, condition: excellent (used), Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber (Special Edition)!! Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Machine Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Test Chamber Volume: approx. 340 liters Description For sale is a used Vötsch ClimeEvent C/340/70/5/S temperature and climate testing chamber from 2019. This unit is a rare special edition with three side-pull-out telescopic test drawers. The test specimens can be conveniently prepared and connected outside the test chamber and then inserted into the test chamber. This makes the system particularly suitable for series testing, development tasks, long-term tests, and applications with frequent sample changes. Each test drawer features a stainless steel grid basket and a separately lockable front with its own test specimen port. The three separate test levels allow for a clear arrangement of several test specimens or assemblies within a single test chamber. Gedezp Nv Depfx Aanjkb The system is equipped, among other things, with WEBSeason Touch control, temperature and humidity control, Donaldson compressed air treatment, and extensive documentation. The system is suitable for: Temperature tests Climate tests Environmental simulation Material testing Electronics testing Component testing Battery testing Sensor testing Quality assurance Research and development Aging and stress tests Technical Data Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Test Chamber Volume: approx. 340 liters Temperature Range: approx. -70 °C to +180 °C Temperature Change Rate: approx. 5 K/min Max. Heat Compensation: approx. 3,000 W Temperature Deviation (time-dependent): ±0.1 to ±0.5 K Temperature Homogeneity (spatial): ±0.5 to ±1 K Temperature Gradient: ≤2 K Power Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated Power: 9 kW Rated Current: 20 A Refrigerant 1: R449A – 2.50 kg Refrigerant 2: R23 – 0.75 kg Max. Low Pressure: 21 bar(g) Max. High Pressure: 25 bar(g) Stand Pressure R23: 13 bar(g) Dimensions External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Test Chamber Dimensions (H x W x D): approx. 750 x 580 x 765 mm Weight: approx. 650 kg Equipment WEBSeason Touch Panel Temperature and Humidity Control Stainless Steel Interior Large Observation Window 3 side-pull-out telescopic test drawers 3 stainless steel grid baskets Separately lockable drawers Heated drawer ports Test specimen ports Donaldson Ultrafilter for compressed air treatment Shipping Information External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Weight: approx. 650 kg Condition Used The unit has been workshop-tested and subjected to a documented test run. The optical condition corresponds to the images. Scope of Supply Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber 3 telescopic test drawers 3 stainless steel grid baskets Donaldson Ultrafilter Accessories according to images Shipping or forwarding possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Weinig OptiCut 260 optimisation cross-cut saw for cutting timber to length and removing sections with defects (marked with fluorescent chalk). The separate measuring station records the lengths and marked defects. Technical data: - Cutting height: 260 mm - Saw blade diameter: 500 mm - Input length: 400 – 6,300 mm - Input thickness: 12 – 80 mm - Feed rate: max. 250 m/min - Cycle time: approx. 1 sec - Saw motor: 7.5 kW Gjdszryupspfx Aanekb - Marking station: 5,000 mm - Outfeed conveyor: 7.5 m with 3 pneumatic ejectors - Control system: OptiCom Pro

Condition: used, Weinig OptiCut C700 under-table cross-cut saw for the safe and precise cutting of solid timber, particularly hard and heavy timbers with large cross-sections. The machine features a pneumatically guided saw unit, two-hand control and a hold-down device, and is ideally suited for sawmills, timber construction and industrial solid timber processing. Gjdpfxezrywdo Aanskb Technical data: - Saw blade diameter: 550 mm - Cutting width: 750 mm - Cutting depth: 175 mm - Motor: 5.5 kW

Condition: used, mileage: 328,584 km, power: 240 kW (326.31 HP), first registration: 05/2017, fuel type: diesel, next inspection (TÜV): 02/2028, color: black, gearing type: automatic, emission class: euro6, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), had accident, immobilizer system, navigation system, parking heater, soot filter, VEHICLE IS NOT ROADWORTHY. ENGINE FAILURE!!!! Special equipment: Assistance package incl. Audi pre sense plus, Audi connect & Audi Phone Box, Exterior mirrors electrically adjustable, heated and foldable, with automatic anti-glare and memory function, Suspension (adaptive air suspension), Interior trim: Piano lacquer inlays, black, Isofix mounts for child seat on front passenger seat, Camera system for all-round view (Top View), Comfort automatic climate control, 4-zone, Alloy wheels 7.5x19 (15-spoke, star design), Alloy wheels 8.5x20 (5-double-spoke), Metallic paint, Multi-Media Interface MMI Navigation Plus with MMI Touch, Panoramic sunroof, electrically operated at the front, fixed at the rear, S sports seats at the front, Side airbags at the rear, Front seats electrically adjustable (left with memory function), Sound system BOSE, Parking heater, Door armrests in leather, Rear window tinted (privacy glass) Gkjdpfozxk Adjx Aansb Additional equipment: Adaptive brake light, Airbag driver/passenger side, Anti-slip regulation (ASR), Audi Drive Select, Equipment package: S line Sport / Plus, Exterior mirrors, aspherical, left, Exterior mirrors, aspherical, right, Exterior mirrors, black, Braking system with recuperation system, Brake assist, Roof rails (aluminum), Electronic differential lock (EDS), Exterior package S line, Driving assistance system: Occupant protection system (Audi pre sense basic), Power windows, electric, front + rear, Windshield with band filter at the top, Floor mats, velour, Luggage net on front seat backrest, Luggage compartment separation (net), Cup holders in center console, Rear lights LED, Isofix mounts for child seat, Body: 4-door, Head airbag system (Sideguard), Steering column (steering wheel) mechanically adjustable in height/length, Center armrest at the rear with compartment, Engine 3.0 L - 240 kW V6 24V TDI, Multifunction display / on-board computer, Black Audi exclusive optics package, Smoker's package, Tire repair kit, Rear seat back split/folding, Low emission according to emission standard Euro 6, Side airbags in front, Seat cover / upholstery: Leather Valcona with logo embossing on front seat backs, Seat heating front, Special paint finish Misano Red pearl effect, Start/stop system, Socket (12V connection) in trunk/loading area, Heat-insulating tinted glass green Vehicle is sold with winter tires! ---- Errors and prior sale excepted VEHICLE NUMBER: 12267

Year of construction: 2023, operating hours: 514 h, condition: used, functionality: fully functional, overall weight: 7,900 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0602, SORT FLUID is a dry sink-float sorting system with an integrated dosing bunker. This replaces conventional wet sink-float sorting and eliminates the need for liquids entirely. Through an innovative combination of airflow, a special bed material, and gravity, the metals are sorted according to their average particle density. This enables separation of light and heavy metals with a high purity of up to > 99%. This module is part of our rental fleet. Gsdpfsxtb A Dsx Aanekb

Year of construction: 2025, operating hours: 100 h, condition: used, functionality: fully functional, overall weight: 9,500 kg, total length: 6,050 mm, total width: 2,450 mm, total height: 2,700 mm, machine/vehicle number: B0403, EDDY CENTRIC combines an iron and non-ferrous metal separator and offers an efficient and compact way to separate metals from a material stream at the highest throughput rates. A combination of a robust and powerful drum magnet separator for separating ferrous metals (nails, screws, etc.) and a centric eddy current separator for separating non-ferrous metals (aluminum, copper, brass, etc.) allows for the production of three marketable fractions in a single processing step. This module is part of our rental fleet. Gsdpfxszfy R De Aanjkb

Condition: ready for operation (used), Year of construction: 2019, operating hours: 42,874 h, working width: 300 mm, cutting length (max.): 6,300 mm, workpiece width (max.): 120 mm, cutting speed: 300,000 mm/min, Optimizing Cross-Cut Saw manufactured in 2019. This WEINIG / DIMTER OptiCut 450 features a maximum board length of 6,300 mm and a wood thickness capacity ranging from 12 mm to 120 mm. It includes a powerful saw motor with 7.5 kW and a feed speed of up to 300 m/min. If you are looking to get high-quality cutting capabilities, consider the WEINIG / DIMTER OptiCut 450 machine we have for sale. Contact us for further details. • Working Height: 900 mm • Feed Direction: Left-hand feed • Blade Diameter: 500 mm • Blade Bore: 30 mm • Input Length, Min.: 500 mm • Input Length, Max.: 6,300 mm • Wood Width, Min.: 30 mm • Wood Width, Max.: 310 mm • Wood Thickness, Min.: 12 mm • Wood Thickness, Max.: 120 mm • Maximum Rectangular Wood Section: 310 × 12 mm • Maximum Rectangular Wood Section: 190 × 120 mm • Minimum Fixed Length After Sawing: 150 mm • Minimum Fixed Length at End of Board: 180 mm • Maximum Board Curvature: 10 mm/m • Length Tolerance: ±3 mm • Cutting Thickness Accuracy: ±0.8–1.5 mm • Feed Speed, Continuously Adjustable: Max. 300 m/min • Cutting Cycle Time, Including Braking and Acceleration: 0.6–1.0 sec. • Saw Motor Power: 7.5 kW (10 HP) • Feed Motor Power: 5.0 kW (7 HP) • Vario Conveyor Motor Power: 2.5 kW (3.4 HP) • Electrical Connection: Approx. 18 kW • Operating Voltage: 400 V / 50 Hz • Control Voltage: 230 VAC / 24 VDC • Nominal Current: 30 A • Fuses: 35 A • Compressed Air Consumption: Approx. 1,200 Nl/min • Operating Pressure: Approx. 8 bar • Extraction Air Velocity: Approx. 30 m/sec. • Extraction Air Volume: Approx. 1,800 m³/h • Sorting Conveyor Width: 250 mm • Usable Conveyor Width: 210 mm Gkodpfxjzwu Hws Aanjb • Maximum Workpiece Width: 300 mm • Exit Conveyor Length: 7.5 m • Automatic Width Measurement: Laser distance sensors • Width Measurement Accuracy: Max. ±2 mm • Number of Active Products: Max. 16 • Minimum Wood Thickness for Measurement: 12 mm • Scrap Pit Width: 250 mm • Maximum Scrap Length: Approx. 120 mm • Heavy-Duty Ejector: For workpieces over 20 kg • Ejector Plate Height: 80 mm • Writing Length: Workpiece length − 10 mm • Control Panel: OptiCom Pro 18.5" • Display Type: Industrial TFT touchscreen • Display Resolution: 1366 × 768 pixels • Front Protection: IP65 • Board Infeed Capacity: Up to 6.3 m • Marking Station: 2 marking positions • Marking Bench Length: 5 m • Electrical System: 400 V / 50 Hz • UPS: 24 V supply • Operating Hours: 42,874 h

Condition: used, Year of construction: 2025, functionality: fully functional, type of input current: AC, overall weight: 4 kg, input voltage: 230 V, Equipment: documentation/manual, type plate available, For sale is a ZEISS GOM Scan 1 MV400, a high-precision optical 3D scanner for demanding measurement and inspection tasks. Ideal for precise 3D measurements in industry and research. Fast setup, easy operation. Condition: Like new, little used, primarily used for trade shows, exhibitions, and training. Scope of delivery: ZEISS GOM Scan 1 MV400 Gedpfjzypzuox Aanekb Original accessories according to standard configuration Power supplies and cables 10 m cable Transport case available Tripod and PC are not included in the offer and will not be provided, but can be offered separately upon request. ZEISS INSPECT OPTICAL 3D Free Open and edit new and existing projects Import of point clouds, polygon meshes Creation, editing, and processing of polygon meshes Element construction: regular geometries, points, sections, curves, surfaces, dimensions CAD import of standard formats IGES, VDA, STEP, JT Open, STL, PLY Application of common alignment methods Comparison against CAD with colored deviation display Dimensional and form/position evaluations according to ISO GPS and ASME Y14.5 Report module Note: The device has only been used for demonstration, training, and presentation purposes. A new 3D acceptance certificate will be provided upon purchase. Furthermore, we would offer to take in used optical GOM or Zeiss systems in part exchange upon purchase of the Zeiss GOM Scan 1 MV400.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, control type: CNC control, degree of automation: automatic, Fully automatic swivel bending machine with warehouse integration Manufacturer: TRUMPF Model: TruBend Center 7030 (B34) Year of manufacture: 2022 Control: TecZone Fold programming, touch operation, additional screen TECHNICAL DATA: Max. bending length: 3,123 mm Min. bending length: 200 mm Max. box height: 220 mm Max. component size: 3,120 x 1,500 mm Max. diagonal of component: 3,460 mm Max. material thickness: Steel: 3 mm, Stainless steel: 2.2 mm, Aluminium: 4 mm Min. material thickness: 0.4 mm Min. bending depth (standard tool): 145 mm Min. bending depth (retractable hold-down tool): 30 mm Connected load: 80 kVA Average power consumption: 15 kW Space requirement (L x W x H): 8,348 x 5,113 x 3,345 mm (min. hall height: 4,300 mm) EQUIPMENT: - Front gauge - Loading grippers - Rotating part manipulator - 2-axis part manipulator with vacuum modules - 5-axis backgauge - Optical angle assistant - Hold-down tools - ToolMaster - Control unit with foot switch - ACB Laser (Automatically Controlled Bending) - 3-surface vacuum module set Gkjdpfx Aasx Tii Isnob - 2-surface magnet module set - Bending tools OBW90 and UBW90 - Retractable hold-down tool ENW - Additional bending tool function ZBW Comprehensive set of various tools included AUTOMATION: - Robot and warehouse interface (use without warehouse requires adaptation) - Loading and unloading unit with warehouse integration (without pallet), including for blank separation - Safety fence, swing doors, light barriers - Unloading table with conveyor system Further information available in the pictures. This used machine can be inspected under production conditions. All information is without guarantee – sale excludes any warranties or guarantees. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 2007, sheet width 3050 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm 8.00 mm down holder 10 Stück cutting angle 0°40 - 2°20 Grad 3340 mm work height max. 860 mm 575 mm Control GP 37W2 13 - 33 0 max. 315 bar oil volume 100 ltr. total power requirement 6.0 kW weight of the machine ca. 6030 + 1850 kg In good condition (!!) current new price including accessories approx. 110.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=3JUqSaaJkFQ Equipment: - Robust CNC electro-hydraulic guillotine shear - AMADA CNC touch control, front left ("GP 37W2") * Machine control including information display * Main display with 4 control panels * Control/operation of all functions * Max. 50 cutting programs with 15 sequences each - CNC electro-motorized backgauge * Travel speed 100 mm/sec. - CNC electro-hydraulic cutting angle adjustment - CNC electro-hydraulic cutting gap adjustment - Sighting device & cutting line illumination for viewing the scribe line * ??Shear cutting according to the optical scribe line - Manually adjustable table support plates, including ball transfer units * Grip recesses in the front support table - 2x freely movable foot switches - Operating instructions + circuit diagram SPECIAL ACCESSORIES included: - Backgauge system with 3 stations + separate control: Gjdpsxaaghsfx Aanekb * STATION 1 - AMADA conveyor belt with pneumatic sheet support device * STATION 2 - AMADA conveyor belt with pneumatic scrap deflector * STATION 3 - AMADA stacking device with scissor lift table device - Wooden box with spare knives - 1x AMADA extra-long side stop, with support foot * Length approx. 3.000 mm - 2x AMADA extra-long front support arms

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. The main difference between the MTRent MTcut v60 and the MTRent MTcut v60D lies in the inclusion of an additional rotary axis ("D" stands for rotary table or integrated 4th axis for extended machining capabilities). TECHNICAL DETAILS Travel in X-axis: 600 mm Travel in Y-axis: 420 mm Travel in Z-axis: 450 mm Distance from spindle nose to table: 120–570 mm Spindle speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/Air Tool interface: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Rotary table or integrated 4th axis Heidenhain iTNC 620 CNC control Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Gkjdpfx Aaozzlhaeneb Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with dual gripper Central lubrication Large access door to the work area Loading option from above using an overhead crane Two waterproof work area lights CE certification • The height and weight of the asset must be considered when selecting the transport vehicle. • A forklift is available for loading. • If the item is not collected on time, a storage fee of €20.00 per lot and for each day started will be charged. The fee must be paid before collection. • The sale is made without any warranty or guarantee. • The information on the technical specifications comes from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the item on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 183610114, functionality: fully functional, stroke length: 1,200 mm, empty load weight: 1,500 kg, working width: 3,000 mm, working height: 1,710 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press drive: Hydraulic Max. clamping width: 3,000 mm Max. clamping height: 1,710 mm Max. clamping depth: 100 mm Number of cylinders: 4 pcs Cylinder stroke: 1,200 mm Horizontal and vertical cylinders: Separately controlled MACHINE DETAILS Voltage: 400 V Current consumption: 3.5 A Fuse rating: 16 A Main motor power: 1.5 kW Connected power: 1.5 kW Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,200 x 2,880 mm Unladen weight: 1,500 kg Number of transport packages: 1 pc Gkjdozzbb Nopfx Aansb EQUIPMENT Remote control

Condition: new, color: red, driver cabin: other, gearing type: other, Vehicle location: en route/in transit, emergency stop, foldable, radio remote control Superstructure: Fassi F 110 B 2.22 Dynamic, at 7.8 m – 980 kg, radio-controlled load chart, max. 5,400 kg, at 4 m – 2,200 kg, 7.8 m – 980 kg, new crane from year of manufacture 2022, additional hydraulics only for swivel servo, the crane is intended for stationary mounting, swivel range 410°, all hydraulic cylinders are double-acting, piston rods are hard-chrome plated, double-knee lever system with PROLINK (overextending boom arm up to 15°), electronic overload cut-off device with FX500, emergency stop, and optical alarm (90% and 100%), pressure relief and load holding valves, control block with 4 control valves, operable from both sides separate hydraulic tank (90 l) with filter, mounted on the crane base, standard color RAL 3020 traffic red, load hook and fastening lugs (short / 500 mm), data subject to change as the crane is en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Gksdezv Spaopfx Aaneb

Condition: ready for operation (used), functionality: fully functional, stroke length: 450 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 450 mm, TECHNICAL DETAILS Gkedpfxozxcmus Aanob Press drive: Hydraulic Max. workpiece length: 3,000 mm Max. workpiece width: 1,300 mm Max. workpiece height: 450 mm Total stroke: 450 mm Number of cylinders: 6 Cylinder diameter: 70 mm Heating type: Oil-heated Max. temperature: 120 °C Separate heating for top/bottom: Yes MACHINE DETAILS Number of work areas: 1 Number of levels: 1 Plate material: Steel Main motor power: 2.2 kW Connected power: 10.0 kW Voltage: 400 V Fuse rating: 32 A Dimensions & Weight Dimensions (L x W x H): 3,800 x 1,650 x 2,400 mm Weight: 3,500 kg Transport packages: 1 EQUIPMENT Heating boiler Note: The plates require repair. The plate on the lower bed is missing.

Condition: used, mileage: 113,000 km, power: 115 kW (156.36 HP), first registration: 03/2018, fuel type: diesel, empty load weight: 2,130 kg, maximum load weight: 1,370 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, total length: 5,970 mm, loading space length: 3,480 mm, loading space width: 2,070 mm, loading space height: 2,300 mm, construction height: 2,300 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, AUTOPARADIES in Berlin, Frank-Zappa-Str. 9A Gsdjzz Rrdspfx Aanjkb Mon-Fri 9:00 AM - 5:00 PM Sat 10:00 AM - 1:00 PM Tel: Mobile/WhatsApp: VEHICLE FINANCING & TRADE-INS POSSIBLE IVECO Daily 35S16V/P Hi-Matic, Flatbed Flatbed: L: 3.48 cm, W: 2.07 cm, H: 0.40 cm VAT can be shown separately 1st owner, * Automatic climate control, * Cruise control, * Air suspension * ABS, ESP, * Driver's comfort suspension seat * 3-seater truck registration, * Radio, * German vehicle * Euro-6 Please call to arrange a test drive appointment. Subject to prior sale and errors. Call us! We speak English. Financing, Trade-ins, You can find more offers on our website. The information provided in advertisements, on the internet, price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller also assumes no liability for errors resulting from typing, spelling, and data transmission errors. The listed equipment may need to be checked separately. Please understand that, although the technical and optical condition of this vehicle is good, we prefer to sell it to commercial businesses or for export, excluding any warranty, due to its age and mileage. Thank you very much! The vehicle description serves only for the general identification of the vehicle and does not constitute a guarantee in the legal sense of purchase. The information does not claim to be complete and does not constitute a guaranteed characteristic within the meaning of § 434 BGB paragraph 1 sentence 3. Errors and prior sale are subject to change.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 19020216, A circular trimming saw and a router for veneer bundles, characterized by a robust, electrically welded construction, high flexural and torsional strength, smaller overall dimensions due to the placement of the feed unit motors in the lower frame, and safety controls. An automatic version with motorized feed is available. -Circular saw, 2.2 kW (3 HP), pneumatic cut height adjustment, mechanical axis adjustment (0 – 3 mm) -Pre-cutting unit with a circular saw blade with height and axial adjustment -Routing unit, 1.1 kW, including an angled router bit (a straight router bit can be purchased separately) -Rear table with a movable stop on ball-bearing rails and pneumatic clamping Gkjdpsz Akftefx Aaneb -Electronic display showing the distance between the stop and the cutting line -Front table, movable for machines with a circular saw and a routing unit -TEX “Power L” touch control panel with programming capabilities -Double hardened and ground rails with linear ball bearings for precise linear movement of all carriages -Control panel with switches for main operating modes -Pressure beam with two pneumatic cylinders and a torsion bar -Cable chain with cable protection -Double-tube inlet for connecting to a dust extraction system -Filter pressure regulator with a lubricator on the compressed air supply line -Optical safety sensors (safety level 4) -CE safety standard -Year of manufacture 2018, put into operation in 2019 Technical data: Cutting length: 3100 mm Circular saw blade diameter: 180 mm Cutting height: 45 mm Feed speed: 0 - 20 m/min Saw motor power: 2.2 kW Router motor power: 1.1 kW Voltage: 380 V

Condition: like new (used), Year of construction: 2024, operating hours: 7 h, functionality: fully functional, total height: 1,620 mm, total length: 1,760 mm, total width: 700 mm, type of input current: three-phase, tank capacity: 285 l, input voltage: 400 V, rotational speed (max.): 2,850 rpm, input frequency: 50 Hz, water tank capacity: 440 l, Water treatment and recycling unit for process water Z 800K HA TURBO FLOC – 2024 | Almost like new For sale, a professional water treatment and recycling unit for process water, model Z 800K HA TURBO FLOC. The system was manufactured in 2024 and has only been in operation for 7 hours, making it practically new. The unit is designed for effective treatment of process water and its subsequent reuse. Thanks to the use of a centrifuge and the Turbo-Floc flocculation system, it significantly reduces water consumption and operating costs for the plant. Gjdpfxjzcybrs Aanjkb Technical specifications: treatment capacity up to 1200 l/h, system dimensions: 1760 × 700 × 1620 mm, centrifuge dimensions: 995 × 680 × 580 mm, drum rotation speed: 2850 rpm, RAL 7035 paint finish, automatic water removal from the centrifuge during braking, polyurethane sludge basket, electromagnetic safety valve. Buffer tank (285 l): made of HDPE plastic, equipped with a Turbo-Floc system for automatic dosing of coagulant or flocculant, additional filter on the inlet of process water, two float switches controlling the liquid level, pulsed power supply by P-3 pump. Clean water tank (440 l): made of HDPE polyethylene, supplies the devices with treated process water, equipped with an efficient P9 diaphragm pump: capacity 7.8 m³/h, working pressure 4 bar, water level control. Control and monitoring system: monitoring of filling and sludge basket replacement, timer relay and light signaling (flashing lamp), PLC controller E60-420, supply voltage 400 V / 50 Hz, control voltage 24 V DC, protection class IP54, operating temperature from +5°C to +40°C, safety feature that prevents the centrifuge from starting unless the cover is opened and closed beforehand. Additional equipment: DP1 dosing pump for coagulant supply, dosing capacity 0–1 l/h, Turbo-Floc flocculation mixer with mixing blades on both sides of the diagonal, special conical guide plates made of stainless steel, mounted inside the centrifuge. The unit is in excellent technical and visual condition. It is an ideal solution for industrial plants using vibration treatment, where effective water treatment and reuse are required. Year of manufacture: 2024 Operating hours: 7 We invite you to contact us for more information and to arrange a demonstration of the unit.

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 fly jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Flatbed body with sideboards 6200x2550x600 mm Step plates Diamond plate flooring Removable sideboards 9 x LED lights Overwidth markings extendable to 3500 mm width Gjdozcr Nzspfx Aanskb Start/Stop Rotating beacon 8 x rung pockets 6 x lashing points 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20 ft container locking mechanism Perforated side profile lashing points 2500daN Crane: FASSI F805R.2.7, with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly jib L436 with 6 hydraulic extensions, rope winch, cross-type radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), complete accessories for winch operation, pivoting roller, quick coupling between main boom and fly jib and more... TECHNO SERIES!! NEW crane model Slewing range endless All hydraulic cylinders double-acting Piston rods hard chrome-plated Double knuckle system with PROLINK (over-extendable knuckle arm up to 10°) Electronic overload cut-out device with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency stop, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter is supplied pre-assembled Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger width 10.00m, Outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Note: Pay attention to the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically pivotable support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 additional functions with » 2 hose lines / hxp-techno Additional knuckle arm (Jib) L436, 6-fold » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct » mounted for Jib for 2 functions Control system for additional function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the Jib » LED for 2 support legs, not mounted » (Crane) LED for 2 support legs, not mounted » (Additional support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Additional price for Dinitrol applicat

Condition: ready for operation (used), Siemens 1FT6136-6AC71-1AL4 synchronous servo motor, serial number: YFS528367007001, with optical encoder B01 2048 S/R and EBD 8B 24V – 40.4W, used, in good condition, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Gedpozahwiefx Aanjkb

Condition: new, Board separator conveyor Gsdpoyknpmefx Aanjkb Outfeed after HewSaw Manufacturer / model: Drive experts UK CA Type: 3E100L4D-FC-A0-D36 Power: 3.0 kW RPM: ~1450 rpm (50 Hz) ~1750–1760 rpm (60 Hz)

Year of construction: 2007, condition: used, machine/vehicle number: EKP 84325-81, OPTICAL SORTER FOR CONTAMINANT SEPARATION - SORTEX by Bühler Godpfxjyv Aite Aanokb Type: MEAF DevCtrl Year of manufacture: 2007 Advanced optical machine designed for automatic sorting of bulk products, primarily foodstuffs, by color, shape, and structure. The unit is mechanically functional. Calibration required. Quoted price does not include transport.

Condition: used, Year of construction: 2004, We are offering this used STORK MPS B.V. bone separator. Type no: DMM50; Serial no: B27-13B; Order no: BX152004; Voltage: 400V; PHASE/Hz: 3/50; Netherlands; Year of manufacture: 2004. Control cabinet is not included. Net price: 7,000 EUR. Price negotiable. Gjdey Hi A Uepfx Aanskb

Condition: excellent (used), CTS Temperature Shock Test Chamber TSS-70/350-A Device Data Manufacturer: CTS GmbH Type: TSS-70/350-A Year of Manufacture: 10/2017 Design: Temperature Shock Test Chamber Refrigeration Unit: Water-cooled Description Used temperature shock test chamber from CTS. Suitable for shock and cycle temperature tests. Application in industry, research, and quality assurance. Application Areas Material testing Aging tests Electronics and component tests Temperature shock tests Automotive and quality control Temperature Ranges Hot chamber: +50 °C to +220 °C Gkjdoy H Hk Aepfx Aanob Cold chamber: -70 °C to +100 °C Electrical Data 400 V / 3/N / 50 Hz Power: 19.8 kW Current: 46.5 A Connection: CEE 63A Refrigeration System Pre-cooling: R452A, 7.2 kg Cooling stage: R23, 2.8 kg CO₂ equivalent: 15.41 t / 41.59 t Water-cooled Pressure / Protection PS: 25 bar PT: 27.5 bar IP 54 Equipment Touchscreen control Microprocessor control Program operation Setpoint/actual value display (digital) 2-zone system Mobile frame for quick changeover Viewing window Integrated control cabinet Cooling water connections Technical Design Separate hot and cold chambers Stainless steel test chamber Industrial design Dimensions Dimensions: External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Documentation Declaration of Conformity Test certificates Operating manual Wiring diagram and piping diagram Spare parts list Service before delivery (optional) Functional test Refrigerant service Leak test Test run with protocol Condition Used. Optical condition, see pictures. Scope of Delivery Test chamber TSS-70/350-A Documentation (if available) Inspection possible by arrangement. Loading and transport can be arranged on request. Subject to change and prior sale. If you have any questions, please do not hesitate to contact us.

Year of construction: 2021, operating hours: 480 h, condition: like new (used), functionality: fully functional, Electrostatic separator (corona) - EBS-4-271200 - builded to extract the metals from the rejection of the plastic from electric cable process Including additional options: - 3 screw transporters; - 3 m3 input hopper; - mechanisms for changing material flow and stand for big bag for mix collection; - touch screen for control cabinet english / rusian language; - set of spare parts Designed for dry high-efficiency separation of materials, that are differ in their electric properties: - mixtures of plastics and metals, including shredded cables, into metal (copper, aluminium), and non-conducting material (plastic); - mixture of different materials, provided that one of the components has conducting properties (extraction oftextilecord from rubber crumb in the processing of used tires ); - shredded WEEE (including PCB’s) into metal (aluminium, copper, nickel, bronze, and other) and nonconducting materials (plastic, textolite, fiber-glass plastic, and other), and also for: - separations of non-metal raw material (feldspar, pegmatite, quartz sand); - enrichingofdroughconcentratesofores of rare metals (titan-zirconia, tantalum- niobic, tin-tungsten, monazite), ores of precious metals (gold, silver); Gkedpfx Aewcp I Aeansb - benefication of diamond ore. The equipment was purchased at the end of 2021 directly from the prestigious manufacturer PRODECOLOGIA, which also installed it in our factory. The equipment works perfectly and can be tested at any time with PVC plastic, from our Guidetti plant for electric cable recycling. Upon request, we can also provide installation + commissioning at the buyer's location. PRICE : 108 000 EURO- netto

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 8,000 rpm, number of axes: 9, This 9-axis TRAUB TNL 32 swiss type turning machine was manufactured in 2014. It features a TX8i-s control with a 64-bit RISC CNC/PLC processor, color TFT display, and electronic handwheel. The main spindle supports a 32 mm bore, and the machine includes a sub-spindle with a C-axis. It offers a dual-driven upper tool turret and a lower turret with nine tool holders. Consider the opportunity to buy this TRAUB TNL 32 swiss type turning machine. Contact us for more information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber-optic PC; color TFT flat-panel display; electronic handwheel Gsdpfx Ajx D Drcoanokb • Software/extensions included: Polyform (C-axis programming), Helical (3D Y-axis interpolation), tapping without compensating chuck, parting tool breakage monitoring, parting tool ejection monitoring, axis shutdown, T-ATC • Main spindle: Motor spindle with hollow clamping system; 32 mm bore/bar capacity; C-axis max speed 8,000 rpm • Max stroke: 305 mm (L version) / 127 mm (K version) • Sub-spindle: Partial hollow clamping, C-axis; cleaning unit mounted on lower tool turret • Upper tool turret: X/Y/Z/H/B axes; 10 tool holders; dual drive • Lower tool turret: X/Y/Z/H axes; 9 tool holders; combined drive; separate counter-spindle operation • Measuring/feedback: Glass scales on X-axis (upper and lower turrets); rotary encoder on C-axis • Back working: 8-position back table with combined drive for up to 3 tools; prepared for internal coolant supply • Clamping: Clamping direction reversal device and counter clamping pressure device on main and counter spindles • Coolant system: Standard system with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), 19 l/min flow rate • Extraction: Connection D 150 mm for central extraction Additional equipment • None specified (no robots, bar feeder, chip conveyor, or external automation listed)