Used Ulma Operculeuse Taurus 570 for sale (954)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 12,800 kg, maximum load weight: 44,200 kg, overall weight: 57,000 kg, axle configuration: > 3 axles, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are individually tailored to customer specifications. Chassis, Low-bed Semi-trailer Steel welded construction, drawbar plate with interchangeable 2 kingpin and 2 kingpin positions 24 tons, 2-speed landing gear, one-sided operation Foldable rear support 2 chock blocks with holder Aluminum side guard 1 plastic toolbox, with insert tray, w=620/h=360/d=440 mm, lockable with a padlock Extendable widening sections to 3,000 mm Storage compartment for timber planks on gooseneck, transverse at the front Timber planks 70 mm for widening to 3,000 mm Telescoping Central tube frame in cleanly welded, interlocking telescoping frame sections. Extendable by a maximum of 6,000 mm and lockable approximately every 1,000 mm Locking with mechanical pin lock With sliding platform Tie-down eyes, low-bed 2 pairs of ring-type tie-down eyes, each 5 tons, at the front on the gooseneck; 11 pairs of tie-down loops embedded at the top and side in the outer frame, each 10 tons; 2 on the gooseneck, 9 distributed in the low-bed area; first tie-down eye 250 mm from the front and last at most 250 mm from the rear, spacing of tie-down eyes not greater than 1,100 mm 8 pairs of socket pockets embedded in the outer frame, inner dimensions 70 x 40 mm, (can be converted to 5-ton ring-type tie-down eyes, not included in the scope of supply) 3 pairs of folding tie-down eyes additionally embedded in the low-bed area, each 10 tons; 1 at the front of the low-bed, 1 in front of the 1st axle, and 1 behind the 3rd axle Axles + Suspension SAF drum brake axles Axle/chassis laser-measured, reducing tire wear and fuel consumption Last 2 axles steerable, with automatic reverse locking via reversing light and manual locking function via a button on the vehicle Air suspension with lift and lower valve Fedpfsi Ri Hnox Aggegg Wheels and Tires 235 / 75 R 17.5, manufacturer Fulda Steel rims in twin configuration, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab; truck must be appropriately prepared; no truck installation (no calibrated scale) 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 1 LED revolving beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning panels, double LED-lit and extendable to 3,000 mm 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Floor Gooseneck with steel / chequered plate surface Storage box embedded in the ramp to the gooseneck Then with 70 mm soft wood floor, steel/chequered plate surface in the wheel arch area Rear slope with 70 mm soft wood floor Side Walls 25 mm aluminum hollow profile, 400 mm high, at the front and side on the gooseneck, pluggable Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally movable Covered with wood Hydraulically operated via tractor PTO with flow control Hydraulic connection with SVK coupling NW 10/3, without connect

Condition: used, Lippert belt conveyor GF 3860-570-450 RA2486 Technical data: Conveyor length (NL): 3860 mm frame width (NB): 570 mm, 770 mm with motor belt width (GuB): 450 mm Overall height (BH): 130 mm Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Fjdjy Ih Ufspfx Aggegg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Lippert belt conveyor GF 5300-570-450 RA2495 Technical data: Conveyor length (NL): 5300 mm frame width (NB): 570 mm, 770 mm with motor belt width (GuB): 450 mm Overall height (BH): 130 mm Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Fjdpsy Nf Ixsfx Aggogg Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Lippert belt conveyor GF 10270-570-450 RA2489 Technical data: Conveyor length (NL): 10270 mm Frame width (NB): approx. 570 mm Belt width (GuB): 450 mm Overall height (BH): 130 mm Support feet optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor, R37 DRE80M4/TH/Z Electrical data: 50Hz V380-500, kW 0.75 / S1 Return pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Optionally available: Supports Side guides Frequency converter for stepless speed control Fsdpfxsy Ih Uxj Aggegg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Lippert belt conveyor GF 4585-570-450 RA2487 Technical data: Conveyor length (NL): 4585 mm frame width (NB): 570 mm, 770 mm with motor belt width (GuB): 450 mm Overall height (BH): 130 mm Fjdpfx Asy Ih Uljggogg Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Lippert belt conveyor GF 5550-570-450 RA2488 Technical data: Conveyor length (NL): 5550 mm Fedpsy Ih Urjfx Aggjgg frame width (NB): 570 mm, 770 mm with motor belt width (GuB): 450 mm Overall height (BH): 130 mm Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Lippert belt conveyor GF 5030-570-450 RA2496 Technical data: Conveyor length (NL): 5030 mm frame width (NB): 570 mm, 770 mm with motor belt width (GuB): 450 mm Overall height (BH): 130 mm Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW 1,1 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Fjdpfx Agsy Nf I Esgsgg Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2022, Knapp roller conveyor 570-510-450 RA2383 Make: Knapp Running direction: both directions Roller width (RB): 450 mm Nominal/outer width (NB): 540 mm Roller diameter: 50 mm Roller distance: 60 mm Stowage area length: 540 mm Height frame: 90 mm Motor Roller conveyors: Interroll EC300 24V Conveyor speed: freely adjustable up to 1,25m/s with Interroll EC300 Motor Scope of delivery: without supports, Light barrier included Optionally available: Supports Side guides Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. Fgjdpsv I Hq Tofx Aggeg We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: ready for operation (used), Year of construction: 2020, clamping force: 2,200 kN, screw diameter: 70 mm, injection weight: 172 g, This Arburg 570 S 2200-800/290 was manufactured in 2020. It features a hydraulic drive system and the Selogica control system for precise operations. With a clamping force of 2,200 kN and a screw diameter of 40 mm, it is ideal for detailed injection moulding tasks. Consider the opportunity to buy this Arburg 570 S 2200-800/290 hydraulic injection moulding machine. Contact us for more information. Clamping unit • Distance between tie bars: 570 × 570 mm • Opening stroke: 650 mm • Ejector force: 70 kN • Ejector stroke: 200 mmInjection unit • Injection unit size: 290 • Injection pressure: 2,500 bar Fgedpfx Asx Nkp Isggog • Shot volume: 188 cm³Drive & control • Drive system: Hydraulic • Control system: ARBURG Selogica

Condition: good (used), functionality: fully functional, machine/vehicle number: 91618975, Year of construction: 2017, operating hours: 1,138 h, load capacity: 7,000 kg, fuel type: electric, battery capacity: 260 Ah, battery voltage: 48 V, front tire type: cushion tires (black), rear tire type: superelastic tires (black), empty load weight: 1,114 kg, Equipment: lighting, Jungheinrich EZS 570 Tow tug, year of manufacture 2017 with a battery from 2021 Details: Jungheinrich EZS 570 Fgedpfx Ajx I Nu Teggeg Year of manufacture: 2017 Work hours (h): 1138 Lift capacity (kg): 7000 Weight (kg): 1114 Front wheels: Superelastic Rear wheels: Superelastic Battery YOM: 2021 Battery capacity (Ah): 260 Battery voltage (V): 48

Condition: used, functionality: fully functional, mileage: 378,046 km, first registration: 01/2022, fuel type: diesel, fuel: diesel, brakes: intarder, color: silver, gearing type: automatic, Equipment: ABS, air conditioning, airbag, central locking, navigation system, retarder, seat heater, Iveco Stralis S-Way 570 - Registered: 01/2022 - Hydraulic system - Retarder: Intarder - Mileage: 378,046 km - Stationary air conditioning - Double bunk - Refrigerator - Heated seats *Price excludes VAT. WE OFFER CUSTOMIZED FINANCING OR LEASING OPTIONS. Fodpfsztxudex Aggogg FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL | NAPLES - CASERTA - PIACENZA D.E. TRUCK S.P.A. | NAPLES - OFFICIAL DEALERSHIP MERCEDES-BENZ AND FUSO TRUCKS DOMENICO ESPOSITO S.P.A. | EBOLI (SA) - OFFICIAL DEALERSHIP MERCEDES-BENZ AND FUSO TRUCKS CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30 AM/7:00 PM - SATURDAY 8:30 AM/2:00 PM WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-trailer-Refrigerated Semi-trailer – Lamberet - Schmitz Isuzu-Fixed body-Crane-Dumper- 4 axles -4 Rear Axles -Tway-T-Way-540- 460 hp - Xway-X-Way-Three-sided- V8 - Scania - Frost Edition Tarp-Box-Liftgate - Refrigerated cell- Insulated with refrigerator - Van Domenico Truck srl is not responsible for any discrepancies regarding technical specifications, optional features, and characteristics, which may differ from the specifications stated in the description in some cases. We invite you to verify the characteristics of the specific vehicle.

Year of construction: 2007, operating hours: 6,865 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 114744, Multivac R 570 skin-pac machine year of production 2007. Built in vacuum pump Busch + Edwards booster pump foil width 562 mm, Advance 865 mm, Fjdpfx Asyk Uyleggjgg 2x moulds No 1. 210 x 160 mm No 2. 255 x 210 mm Very well maintained machine taken out direct from production site.

Condition: used, Year of construction: 2024, Telescopic drawbar Cat III/IV Coulter set Wide coulter Levelboard with tine / air brake Following harrow DSTS roller Lighting / Fedpfstvgmcex Aggsgg

Condition: used, Year of construction: 2024, Equipment: compressed air brake, Tined Weeder DSTS Ø630 lighting hydraulic stone protection drawbar with / drawbar eye 51mm coulter set HMSpitze+Leitbl 30 coulter set Flügelsch flat 30m / roller level board DSTS roller Ø630mm chassis 40km/h air brake 40km/h / Fsdpfer E Avtsx Aggsgg

Condition: used, Year of construction: 2024, Telescopic drawbar Cat III/IV Coulter set HM point + guide plates Levelboard with / drag tines Air brake Following harrow DSTS roller Lighting / Fjdpjt Hrzdjfx Aggogg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, power: 570 kW (774.98 HP), overall weight: 4,000 kg, type of input current: three-phase, pressure: 6 bar, temperature: 120 °C, Equipment: documentation/manual, hot water, type plate available, Mobile oil-fired heating system in a 20-foot container – Buderus 570 kW / Weishaupt burner – Year of manufacture 2023 (can also be converted to gas operation) We are selling our mobile oil-fired heating system because we have switched to solar energy. This system served as an emergency or supplementary heating system for us, is 100% ready for operation and is sold as is – including stainless steel chimney, electrical distribution panel and complete interior fittings. Technical data: Boiler: Buderus Logano plus GE615, output 511–570 kW (rated output), max. 120 °C, 561 l water content, PMS 6 bar Burner: Weishaupt WM-L10/3-A monarch, T-3LN multiflam®, year of manufacture 2023, heating oil EL (200–900 kW), NOx class 3 Power supply: 230 V / 400 V, 50 Hz, protected by Hensel main distribution panel (3x63 A) with CEE connections Container: 20-foot standard container (approx. 6.06 × 2.44 × 2.59 m), approved for road transport, insulated and equipped with lighting Stainless steel chimney mounted externally, tensioning cables included Complete internal piping with insulation, circulation pumps, water treatment Flexible in terms of fuel: The Buderus GE615 is a condensing oil/gas boiler and can be converted to gas operation with a single adjustment (replacement or modification of the burner) – perfect for locations with a gas connection. Possible applications: Ideal as a mobile large-scale heat source for construction projects, larger building complexes (e.g. as interim heating until the final heating system is commissioned), heating for large halls or for supplying hot water to larger projects. After connecting the piping or via hoses to the existing taps, it is immediately ready for operation. Procedure: The piping will be disconnected from the tap by us. Afterwards, the container can be picked up with a suitable truck (container transport) and set up at the new location. For commissioning (and possibly conversion to gas operation), we strongly recommend involving a qualified plumbing/heating specialist so that all settings on the boiler and burner can be made professionally. Original purchase price 2023: approx. 150,000 € Fgodpfx Ajy Sz Rueggog Selling price: 65,000 € negotiable – serious offers are welcome, just write to us. Inspection possible at any time by appointment. If you have any questions, please do not hesitate to contact us!

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 150 h, input voltage: 400 V, total length: 6,000 mm, total width: 1,260 mm, total height: 2,130 mm, compressed air connection: 6 bar, type of input current: AC, overall weight: 2,500 kg, input current: 32 A, conveyor belt width: 550 mm, warranty duration: 12 months, roll width: 500 mm, 1. very precise fully automatic screen printing machine, which positions the motif with an accuracy of 0.03 - 0.05mm to the material. The integrated sensor recognizes the edge or print mark and positions the screen with an accuracy of 0.02mm to the sheet or print mark. It prints from roll to roll with unwinder + rewinder. UV drying and hot air drying up to 160 degrees Celsius are integrated Fodequ R Skopfx Aggegg 2. welded steel frame and very dynamic servo axes for maximum precision and smooth running 3. the printing table is made of cast aluminum with a flatness of ± 0.1 mm per meter 4. all guides are hardened linerar guides for a long service life 5. an integrated, electronically controlled pneumatic squeegee pressure compensation (option), which acts directly on the individual squeegee holders, is able to level out even the smallest unevenness in the printed material.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 310 mm, turning length: 1,600 mm, turning diameter: 520 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, Pinacho CNC lathe, Taurus-260 x 1500mm, equipped with a Fagor 8055 CNC control. Swing over bed: 520mm, swing over cross slide: 310mm, spindle bore: 80mm, variable speeds from 0-2500 rpm. The lathe features a universal 3-jaw chuck with a diameter of 250mm and a manual quick-change tool turret, and is equipped with a fixed steady rest. All bearings of the main spindle and tensioners have been replaced with new ones. The lathe is in very good condition. Fgjdpfx Aszmp Eteggsg

Condition: new, Year of construction: 2015, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 57 mm, measuring range Y-axis: 41 mm, measuring range Z-axis: 30 mm, total width: 240 mm, total length: 330 mm, total height: 720 mm, HITEC - Measurement Technology QCM 570 Exhibition machine, as new condition Year of manufacture: 2015 (RRP €27,000.00) - For highly accurate, repeatable measurements of complex workpieces - Various telecentric lenses - Camera system: USB 3.0 / 5 Megapixels - Automatic part program recognition M3 Software: - 23″ touchscreen - Flexible probe library, tolerance and programming functions - Visual display of Pass/Fail results with trend indication - CAD export Fgsdpfx Aoyvur Toggog Measuring range / field of view: 57 x 42 mm Length measurement deviation: 4.5 µm + L/50 (L in mm) Camera system: USB 3.0 / 5 Megapixels Incident light: 4-segment LED ring light Transmitted light: LED Height adjustment: 30 mm The measuring system can be inspected at any time at the Chemnitz location.

Condition: excellent (used), functionality: fully functional, mileage: 456,000 km, fuel type: diesel, wheelbase: 3,800 mm, fuel tank capacity: 1,200 l, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, Year of construction: 2022, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, air conditioning, blind spot assist, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, full service history, hill-start assist, lane keeping assist, navigation system, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, start-stop system, tachograph, tire pressure monitoring, traction control, trailer coupling, Iveco S-Way 570 FP 2022 Full air suspension Intarder Static climate control Full LED headlights Fjdpfx Agey T E Sxjgsgg Dual fuel tank New injectors, with Iveco invoice.

Condition: excellent (used), Year of construction: 2011, Year: 2011 Fgjdpextxd Sjfx Aggog Maximum sheet size: 530 × 740 mm Laminating speed: up to 25 m/min Automatic suction feeder Pneumatic roller pressure Automatic film cutting Compatible with gloss, matt, and soft touch films Short changeover time – ideal for short runs

Condition: like new (used), functionality: fully functional, mileage: 255,558 km, first registration: 06/2023, fuel type: diesel, fuel: diesel, brakes: intarder, color: yellow, gearing type: automatic, Equipment: ABS, Bluetooth, onboard computer, parking air conditioner, Iveco Stralis S-Way 570 -Full air suspension -Registered in 2023 -Retarder: Intarder -255,558 km -Auxiliary air conditioning -Double bunk WE OFFER CUSTOMIZED FINANCING OR LEASING OPTIONS ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER BRANCHES OF OUR GROUP: DOMENICO TRUCK SRL | NAPLES - CASERTA - PIACENZA D.E. TRUCK S.P.A. | NAPLES - OFFICIAL DEALERSHIP MERCEDES-BENZ AND FUSO TRUCKS DOMENICO ESPOSITO S.P.A. | EBOLI (SA) - OFFICIAL DEALERSHIP MERCEDES-BENZ AND FUSO TRUCKS CONTACTS: 0823 1686306 335 6713062 Fedpfx Aszl Acpeggsgg BRANCH OPENING HOURS: MONDAY-FRIDAY 8:30 AM/7:00 PM - SATURDAY 8:30 AM/2:00 PM WE OFFER A WIDE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man - Nissan V8 - Intarder- 770s -Limited Edition - 660 S Semi-trailer-Refrigerated Semi-trailer – Lamberet - Schmitz Isuzu-Fixed body-Crane-Tipper- 4 axles -4 Rear Axles -Tway-T-Way-540- 460 hp - Xway-X-Way-Three-sided- V8 - Scania - Frost Edition Tautliner-Box-Tailgate lift - Refrigerated cell- Insulated with refrigeration - Van Domenico Truck srl is not responsible for any discrepancies regarding technical specifications, optional equipment, and characteristics that may differ in some cases from the options indicated in the description. We invite you to verify the characteristics of the specific vehicle.

Condition: new, sheet thickness: 70bending length: 2100upper roll diameter: 540 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 6.940,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 19.500,-- - side supports EURO 10.400,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) Fgedpfx Ajd Ab N Seggog We have many references!

Condition: used, functionality: fully functional, mileage: 253,929 km, first registration: 01/2022, fuel type: diesel, fuel: diesel, brakes: intarder, color: white, gearing type: automatic, Equipment: ABS, AdBlue, Bluetooth, airbag, onboard computer, Iveco Stralis S-Way 570 -Full air suspension -Registered in 2022 -Retarder: Intarder -253,929 km -Auxiliary air conditioning system -Double bunk *Vehicle price excludes VAT. WE OFFER CUSTOMIZED FINANCING OR LEASING OPTIONS. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL | NAPLES - CASERTA - PIACENZA D.E. TRUCK S.P.A. | NAPLES - OFFICIAL DEALERSHIP MERCEDES-BENZ AND FUSO TRUCKS DOMENICO ESPOSITO S.P.A. | EBOLI (SA) - OFFICIAL DEALERSHIP MERCEDES-BENZ AND FUSO TRUCKS Fgedpszidbuefx Aggsg CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30 AM/7:00 PM - SATURDAY 8:30 AM/2:00 PM WE OFFER A WIDE SELECTION OF USED COMMERCIAL/INDUSTRIAL VEHICLES FROM VARIOUS BRANDS: Fiat – Hyundai – Daf - Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500 - V8 - 650 - 580 - 730 - S500 - S 500 - S500 – Stralis – Man - Nissan V8 - Intarder - 770s - Limited Edition - 660 S Semi-trailer - Refrigerated Semi-trailer - Lamberet - Schmitz Isuzu - Fixed body - Crane - Tipper - 4 axles - 4 Rear Axles - Tway - T-Way - 540 - 460 hp - Xway - X-Way - Three-sided - V8 - Scania - Frost Edition - Tarp - Box - Tail lift - Refrigerated cell - Insulated with refrigeration - Van Domenico Truck srl is not responsible for any discrepancies regarding technical specifications, optional equipment, and features, which may differ from the details described in some cases. We invite you to verify the specifications of the specific vehicle.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,000 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, input frequency: 50 Hz, Equipment: documentation/manual, rotational speed infinitely variable, Solar gas turbine Taurus 65 Solonox (6.3 MWe) ready for delivery. Package description: Taurus 65 8401S (6.3 MWe ISO), Solar RGB & Leroy Somer 6.3 kV generator. Year of manufacture: Package 2011; gas turbine and gearbox replaced with new units in 2022. Engine starts: 14 / Package starts: 399. Running hours (gas turbine & gearbox): 2,423 hours. Location: Spain – unit stored at our indoor, temperature-controlled facility. The genset is currently available in our Zaragoza warehouse. Inspections welcome at any time. Scope of supply: - Main package in container, including: • SOLONOX Taurus 65 gas turbine generator (T65) – 2,423 operating hours • 6,300 V alternator • Control panels Fjdpfx Agoytpbijgjgg • Fire detection module • Gas train • Air inlet filter • Air outlet duct • Oil cooler • Gas compressor • 2 x gas storage tanks • Gas compressor cooler - Control system: • On-skid TTS4 Control System (Siemens S7 based) Available documentation: - Official borescope inspection report carried out by Solar following shutdown - Alternator maintenance report - Official Solar certificate confirming replacement of gas turbine and gearbox with new units in 2022 - Official data sheet for the complete package Additional information: - Most recent power generation: end of 2023 - Preservation: stored indoors in temperature-controlled building - Delivery: immediate