Used Various Robotic Line To Produce Toffee Apples for sale (27,022)

Condition: used, Year of construction: 2001, TECHNOLOGICAL LINE FOR MANUFACTURING ROOFING ELEMENTS 1. Profiling machine 2. Insulation element production system 3. AL foil preparation system Hnjdpfoyv E Aijx Aacek 4. Gluing system 5. Auxiliary components, technical documentation, certificates Types of roofing panels produced on the technological line: - Roofing panels with modular dimensions 1100 mm x 1070 mm - Roofing panels with half-module dimensions 550 x 1070 mm - Roofing panels without anti-condensation layer in various lengths (up to 6 m)

Condition: ready for operation (used), functionality: fully functional, A special machine is for sale. It is a complete production line for the manufacture of heating segments. The production line was built and developed by Bosch itself. The heating segments are suitable for instantaneous water heaters. You can see a picture of the segments in the 2nd picture of the picture gallery. The production line also includes a test station. Everything is apparently available in terms of documentation. Hnodpfx Ajydlgveacok

Condition: excellent (used), Year of construction: 2011, CNC Profiling Center Weinig Conturex 2 for milling, drilling, and sawing in cross and longitudinal machining Type C 124 Year of manufacture: 2011 Hjdpfxjypb Ads Aacenk Very good condition Oertli tool set Working width: 40–260 mm Working height: 25–150 mm PowerGrip clamping table, table support length: 2 x 2280 mm Workpiece length without repositioning cycle: 220–2700 mm Workpiece length with repositioning cycle: 2700–4500 mm Workpiece length with multiple repositioning cycles: 4500–6000 mm

Condition: ready for operation (used), A complete DIMA mozzarella production line is available. Within this plant, the mozzarella is cooked, salted, cut, sealed in plastic packaging and finally packed in boxes and stacked on pallets. Hsdetnilhopfx Aacsnk

Year of construction: 1990, condition: ready for operation (used), A complete and automated OMAG paving block production line is available. Components: 1) Drawing plate for Colormix in the hopper. 2) InLine washing system. 3) Drying side Rekers. 4) Handling Rekers. 5) Rekers control system. 6) Rekers fork carriage. 7) Part of the drying chamber racks, as they are load carriers for the building. 8) Board crane as buffer placer and empty boards. 9) Cyklop horizontal strapping. Without strapping and boards. Concrete feed: 2-axis bucket, output with 90x90 paving blocks: 1000-1100/shift, board size: 1000mm/1400mm, max. format size: 1000mm/1400mm. Completely new OMAG control system in 2017. Conversion to proportional valves in 2014. Documentation available. On-site inspection is possible. Hedpjv Nn Hxefx Aacenk

Condition: ready for operation (used), Year of construction: 2011, A complete pasta line with 2x Cappelletti forming sets is available. 1) Pasta Technologies Group SRL dosing and mixing unit for pasta ingredients such as flour, water, and micro-ingredients. 2) Combined mixer-sheeter Pasta Technologies Group SRL MASA 540, year of manufacture: 2022, dough sheet thickness range: 7mm–8mm, dough sheet width: 540mm, corrugated rollers: 3, pairs of smooth rollers: 1. 3) 2x forming machines GEA/Pavan MRW 540, year of manufacture: 2011, pasta types: Ravioli/Cappelletti, production output Ravioli/Cappelletti: 140/120 strokes/min, dough sheet width: 540mm, machine dimensions X/Y/Z: approx. 1800mm/1700mm/1300mm, weight: approx. 1200kg, filler frame weight: approx. 210kg. Includes 2x Cappelletti tools 3D. 4) Double conveyor belt and waste recovery unit. 5) Dough scrap return system Pasta Technologies Group SRL RS100 with cyclone. 6) Complete system control and management by Pasta Technologies Group QEHD. Documentation available. An on-site inspection is possible. Hnsdpfsw Dfgkex Aacsk

Condition: used, Year of construction: 2006, machine/vehicle number: 105554, We offer this used Weinig Conturex window production line, year of manufacture 2006. Machine number: 105554 Machine type: Conturex Year of construction: 2006 Circuit diagram number: FP 3013 Supply voltage: 3×400 V Supply frequency: 50 Hz Control voltage: 230 V Control frequency: 50 Hz Control voltage: 24 V Control frequency: 0 Hz Main fuse: 139 A Current capacity: 160 A Power: 61 kW If you have any questions or require additional information, please send us a message or contact us by phone. CNC machining centre for processing wooden profiles (windows, doors, etc.). Comes with an additional linear tool magazine (120 positions), 2 four-axis machining heads for simultaneous processing (20kW), automatic loading and unloading tables. Optionally, a comprehensive tool package is available (tool holders, angle heads, profile heads). Currently the machine is in continuous use. The machine was purchased in 2024 after a complete overhaul. Since then, it has operated for 15 months on a single shift. Technical specifications: Working ranges: Minimum width: 25 mm Maximum width: 260 mm Minimum height: 10 mm Maximum height: 150 mm Minimum length: 180 mm Maximum length: 4500 mm The max. working length is achieved by multiple transfer of the part in the clamp. Spindle no. 1: Number of axes: 4 Motor power S1: 20 kW Motor speed range: 0 – 18,000 rpm Direction of rotation: right / left C axis: yes Feed rates: - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450 °/s Hand tool magazine for spindle no. 1: - Magazine type: disc - Magazine capacity: 18 tools - Holder spacing: 100 mm - Max. weight per tool: 10 kg - Max. total tool weight: 130 kg - Tool holder type: HSK F 63 Spindle no. 2: Motor power S1: 20 kW Motor speed range: 0 – 18,000 rpm Direction of rotation: right / left C axis: yes Feed rates: - Z axis: 60 m/min - Y axis: 120 m/min - C axis: 450 °/s Hand tool magazine for spindle no. 2: - Magazine type: disc - Magazine capacity: 18 tools - Holder spacing: 100 mm - Max. weight per tool: 10 kg - Max. total tool weight: 130 kg - Tool holder type: HSK F 63 External magazine: - Magazine type: linear - Magazine capacity: 120 tools Hnedpfx Aaeyu Sn Uocsk - Holder spacing: 80 mm - Tool holder type: HSK F 63 Loading table: automatic cross-feed Unloading table: automatic cross-feed CNC control: PLC: Siemens S7 Mobile control panel Control computer: - Operating system: Microsoft Windows - Modem for data transfer and diagnostics - Touchscreen Siemens Sinumerik 840 D Number of axes: 4 The machine is in full working order and is currently in continuous production. For an additional charge, a comprehensive range of accessories is available: 8 angle heads, a package of 3 standard tool holders, and a package of 17 new arbors for heads.

Condition: ready for operation (used), Year of construction: 2000, Line for the production of round tubes and closed profiles from black and stainless steel, with diameters ranging from 20.0 mm to 70.0 mm and wall thicknesses from 0.5 mm to 3.5 mm. Different diameter ranges are possible by manufacturing a suitable set of rollers. The tube or closed profile is formed by rolling the appropriately sized and thick steel strip using a roller set, then joined together by TIG welding. During production, the following processing steps are performed: a) grinding the weld seam b) calibration c) straightening d) and cutting to length Hnodjxmiirspfx Aacjk The finished product, the 'raw tube', can be further processed to achieve the desired surface structure. Two main finishing processes are used: a) wet grinding using abrasive belts b) and/or dry polishing using polishing wheels and compounds. CONSTRUCTION The tube/profiling line features automatic TIG welding by SAF: a) Tricathode NERTAMATIC 300 TR TIG inverter, 2 units b) Tricathode NETRINOX TH 500 TIG inverter, 1 unit c) Welding of 0.5 – 1.5 mm wall thickness products using E16 torch d) Welding of 1.5 – 3.5 mm wall thickness products using E25 torch e) RETRISAF cooling system 1.1 Steel strip coil support and decoiler 1.2 Roll forming stations a) entry station b) preliminary forming station c) main forming station 1.3 Welding segment – triple-electrode TIG welding heads with inert gas (argon) shielding 1.4 Weld seam cleaning station 1.5 Calibration station 1.6 Straightening station 1.7 Flying saw – product cutting to specified length Additional line components: 1.8 Bossi 4-head tube grinder Type: CPS 400x3000/4 Belt: 3000x150 mm 1.9 Bossi 2-head tube polisher Type: CP 400-2U

Condition: good (used), Year of construction: 2015, Pellet production line, components from Mechanika Nawrocki and Cedrus Line with two Mechanika Nawrocki GRB2 750 2x 100kW granulators Two 250kW beater mills cyclone filters - dust removal system pneumatic and mechanical transport Dosing tanks year of production 2015/16 Hsdpfx Aajwcdlpjcenk Possibility to purchase individual machines

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 700 mm, total width: 2,000 mm, total height: 1,350 mm, type of input current: three-phase, input voltage: 380 V, working width: 1,300 mm, The DRM model offers the most economic single roller coater for smaller or start-up companies looking to oil wooden floorboards. This machine is specifically designed for the application of oil and glue. The machine is fully operational without any functional defaults. The machine comes with two new glue trays. Contact us for a quote, or visit our Test Center for a free demo. Hnodpfx Aajxdxf Rscek

Condition: excellent (used), Year of construction: 2024, operating hours: 2,000 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, working width: 400 mm, warranty duration: 12 months, power: 15 kW (20.39 HP), Fast and efficient UV drying tunnel for oils and lacquers. Delivers instant curing and a durable, high-quality finish. Hnjdpfjxuibkox Aacok Equipped with adjustable UV lamps (50–100%) and a heat- and UV-resistant INOX mesh belt. Lamp type and configuration (mercury or gallium, 5 kW each) available on request. Before sale, the machine is fully cleaned, serviced, and tested.

Condition: like new (used), Year of construction: 2025, operating hours: 8 h, functionality: fully functional, total length: 700 mm, total width: 2,000 mm, total height: 1,350 mm, type of input current: three-phase, input voltage: 380 V, working width: 1,300 mm, The DRM model offers the most economic single roller coater for smaller or start-up companies looking to oil wooden floorboards. This machine is specifically designed for the application of oil and glue. With just 8 operating hours, this machine is as good as new. Hodpfexdxabjx Aaconk Contact us for a quote, or visit our Test Center for a free demo.

Year of construction: 2008, condition: ready for operation (used), Produces light sources in the form of tubes, product dimensions: 2-4x100-1200mm, including coating, cleaning, sealing, high vacuum station, labelling station and Compressor ALMIG LENTO 15. Hodpfx Aasg Tvy Decjnk

Condition: used, A fully assembled and working pellet production line with a capacity of up to 3 tons per hour is for sale. The factory is little used – only 16,000 tons were produced, it is in very good technical and visual condition. Ideal for professional production of pellets from wood biomass, agrobiomass or other raw materials. Hsdjx S Egmspfx Aacenk No additional premises are required for the installation of the plant, the pellet press is already built into the container. The line includes: Press and mill: Salmatec Maxima 700 – reliable German quality with high efficiency and long-term stability. Transport and dosing equipment: Rematec – robust and accurate material supply at all stages. Tent shelter. Additional equipment: cyclones, sieves, cooler, control panel, etc. All DWG files, drawings for the foundations of the equipment are available. Main advantages: Large production capacity – up to 3 t/h. High quality components from European manufacturers. Ability to adapt to usage of different raw materials. Line in working order – can be demonstrated in operation. Available immediately.

Condition: used, Complete pellet production line with a maximum capacity of up to 5 tons per hour (limited by dryer capacity). Pellet Presses (3 units): CPM 7122 CPM 7922-2 CPM 7930-4 (only ~200 working hours) Hammer Mills (3 units): Maier hammer mill for wet material Maier hammer mill for dry material Kamas hammer mill (for burner material production) Cooling System: CPM pellet cooler Additional Information: Electrical and control systems are fully integrated into container units Production line has been in operation for approximately 2 years Belt conveyor, reception hopper 4 kW Dryer: distributor reception hopper 2,2 kW Conveyor belt, reception hopper 2,2 kW Worm conveyor for drum dryer 2,2 kW Drum dryer 7,5 kW Main cyclone 90 kW Sluice head cyclone 7,5 kW Fan cyclone 18,5 kW 1 Sluice cyclone 1 2,2 kW Sluice cyclone 2 0,55 kW Sluice cyclone 3 0,55 kW Worm conveyor for cyclones 1-3 3 kW Hammer mill – Maier 160 kW Hammar mill for dust burner – Kamas 110 kW Hammar mill for woodchips – Maier 132 kW Worm screw for elevator 4 kW Elevator for buffer pocket 7,5 kW Buffer pocket high/low 8/4,5 kW Hnsdpfx Aaeyvz Afecok Scraper conveyor for the presses 2,2 kW Worm screw for dust mill 2,2 kW Press 1 CPM: Model: 7122 Main engine 160 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Oil lubrication 1,5 kW Grease lubrication 0,18 kW Press 2 CPM: Model: 7922-2 Main engine 250 kW 200 kW Cascade mixer 7,5 kW Feeding screw, frequency converted 2,2 kW Oil lubrication 1,5 kW Feeding screw 4 kW Press 3 CPM: Model: 7930-4 Work only 200 hours Main engine 250 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Oil lubrication 1,5 kW Oil cooler 2,2 kW Grease lubrication 0,18 kW Conveyor for warm pellets 2,2 kW Belt conveyor to the refrigerator 2,2 kW Pellet refrigerator, outflow 1,5 kW Fan for the pellet refrigerator 11 kW Fan for the suction 5,5 kW Elevator 2,2 kW Belt conveyor 1,5 kW Belt conveyor 4 kW Combustion air fan 45 kW Conveyor fan 22 kW Conveyor fan 11 kW Silo filter 0,04 kW Filter fan 4 kW Screw for dust silo 2,2 kW Driving motor for dust silo 1,1 kW Oil pump 1,5 kW Dosing screw 0,75 kW Sluice feeder 0,37 kW

Condition: used, Year of construction: 2011, Wittmann handling device, year 2011, as new Hnsdpfxjw I Eubj Aacok

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: MT-108/2016, We are offering a used IPVET EPS/MW Custom Sandwich Panel Production Line, manufactured in 2016. The machine has seen very little use. Manufacturer: IPVET Model: EPS/MW Custom Sandwich Panel Year of Manufacture: 2015 Condition: Used Category ID: 1059 Type: EPS/MW Sandwich Panel Production Line The EPS/MW (Expanded Polystyrene/Mineral Wool) sandwich panel production line is suitable for the manufacture, staging, and packaging of assorted types and sizes of sandwich panels with insulation. The line includes all necessary electrical circuits, hydraulic system, and control units required for operation. The production line is capable of manufacturing the following products: - EPS roof panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - EPS wall panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - MW roof panels with insulating thicknesses: 80mm, 100mm, 120mm - MW wall panels with insulating thicknesses: 80mm, 100mm, 120mm Raw materials used in production: - 0.4-0.7mm x 1250mm pre-painted, galvanized steel sheet - EPS 80 Expanded Polystyrene boards - MW Mineral Wool (Spanrock XL) - Adhesive (polyol) - Adhesive (isocyanate) Machine Units/Equipment included in the Sandwich Panel Production Line: The EPS/MW sandwich panel production line is a comprehensive system consisting of several machines and equipment. The production line comprises the following units: 2.1. Decoiler for external steel sheet with trolley 2.2. Trapezoidal roller conveyor Hodpfeyw Tmlsx Aacjnk 2.3. Shearing knife for cutting steel sheet 2.4. Micro-corrugation roller conveyor 2.5. Edge-forming roller conveyor for standard joint outer facing 2.6. Edge-forming roller conveyor for concealed joint outer facing 2.7. Decoiler for internal steel sheet with trolley 2.8. Shearing knife for cutting steel sheet 2.9. Micro-corrugation roller conveyor 2.10. Edge-forming roller conveyor for internal facing 2.11. EPS/MW insulation dispenser unit 2.12. Insulation material conveyor belt 2.13. EPS/MW insulation trimming knives 2.14. Adhesive application unit 2.15. Pump 2.16. Adhesive spreading unit 2.17. Laminating roller conveyor 2.18. Cutting saw 2.19. Accordion roller conveyor 2.20. Roller discharge table 2.21. Stacking and flipping unit 2.22. Transport trolley for stacking 2.23. Packaging unit 2.24. Chain conveyor unit for material handling If you have any questions or require further information, please send us a message or call us.

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, Hodpfx Aasyi Ezkjconk - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: used, 1) PVC Double Head Welding Machine – Emmegi Fusion 2LV3440 Year of manufacture: 2011 Double head welding machine for PVC profiles. Machine in perfect working condition, regularly maintained annually, complete with manual. 2) PVC Corner Cleaning Machine – Emmegi / Rinaldi Trimmer E Year of manufacture: 2011 Automatic corner cleaning machine for PVC profiles, equipped with lateral support arms. Machine in working condition, regularly maintained, complete with manual. 3) Glazing Bead Cutting Machine – Emmegi Microbo 4200 DX Year of manufacture: 2008 Cutting machine dedicated to glazing beads, designed to ensure precision and repeatability. Included equipment: Roller conveyor Electronic control system Machine in working condition, regularly maintained, complete with manual. 4) Single Head Cutting Machine – OMG mod. Bifra 550 Year of manufacture: 2006 Blade diameter: 550 mm Roller conveyors included Measuring handwheel included 5) Reinforcement Screwdriver Machine – Emmegi Fissa A Year of manufacture: 2012 Screwdriver machine for metal reinforcements used in window and door production. Machine in working condition. 6) Hardware Assembly Table – Emmegi BMF 3400 Hedpfoywkc Rex Aacsnk Year of manufacture: 2008 Table dedicated to hardware assembly for window and door frames. Complete with: Screwdriver Espagnolette system Hardware storage system Machine in working condition. 7) Testing and Glazing Table – Emmegi Vitro Year of manufacture: 2008 Table dedicated to testing and glazing operations for window frames. Machine in working condition. 8) Compressed Air System – NEW Year of manufacture: 2024 – never used Complete system for compressed air production and treatment, consisting of: Boge C12-2LF screw compressor, soundproofed, 11 kW, inverter, air flow from 530 to 2,020 l/min, super-silent version Vertical galvanized tank 725 liters, max pressure 10.8 bar, complete with safety valve and pressure gauge Electronic timed drain valve MTA CA Condensate water/oil separator MTA LP04 Compressed air dryer MTA DE-XG027, air flow 2,700 l/min 9) 4-Axis Machining Center – MECAL MC 304 ATLAS Year of manufacture: 2007 4-axis machine equipped with front working unit, specifically designed for aluminium processing. Maximum working length: 7430 mm X-axis working stroke: 7210 mm Y-axis (transversal) stroke: 550 mm Z-axis (vertical) stroke: 500 mm A-axis (rotating spindle axis): rotation range ±180° 10) Double Head Cutting Machine – TEKNA TK 145 Year of manufacture: 1994 Blade: Ø 500 mm Max cutting length: 4000 mm Blade inclination: outward 11) Cantilever Rack Structure Double-sided cantilever system, 1 double-sided block, 9 levels per side: Height: 9 m Max load per column side: 8,100 kg Max load per arm: 900 kg each 12) Single Head Copy Router – Rinaldi Magnum 360I Year of manufacture: 2003 The machine allows processing on four sides without repositioning the workpiece, ensuring maximum precision and operational continuity.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AN2018080, total length: 12,860 mm, total width: 4,806 mm, type of input current: three-phase, input voltage: 400 V, feed length X-axis: 3,000 mm, working width: 350 mm, power: 25 kW (33.99 HP), TRC 1500 – Timber Repair & Cosmetic Machine Technical Description • System Overview • Process Workflow System Overview The Wintersteiger TRC 1500 is a fully automated industrial system designed to detect, repair defects in wooden boards. It combines advanced 3D scanning, high-pressure thermoplastic injection technology to deliver consistent, high-quality repairs at production speed. Defects are repaired with thermoplastic filling material using injection and application units. No filling material is wasted thanks to the precise calculation of the filling quantity and precision injection. the edges can also be filled. Key Features • Automated 3D laser triangulation defect detection • High-pressure thermoplastic injection for durable repairs • Precision finishing unit for cosmetic perfection • Independent melt temperature zones with 8 kg tank • Closed glycol-water cooling system for controlled solidification • Ethernet-based control system with remote maintenance • Unlimited product profiles and intuitive scanner interface Product Range (Workpiece Specifications) Length 500–3000 mm Width 100–350 mm Thickness 3–30 mm Production speed upto 10 m/min – depending on number and sizes of defects Filling System – Injection & Application Units • Injection Unit: • 3-axis positioning (X/Y servo-driven, Z pneumatic) • Pressure-regulated melt feed • High-pressure injection • Application Unit: • 3-axis control • Fine finishing of repaired areas Faulty Spot Eye Scanner • 3D laser triangulation and high-speed camera system. • Detects defects from approx. 1 mm depth • Automatic height adjustment • 2D + 3D measurement • Adjustable parameters for wood types Melting Unit • 8 kg tank • Independent temperature zones • Integrated piston pump for constant pressure Cooling Unit • Closed glycol-water circuit • Stable temperature control Control System • Ethernet-based communication with remote maintenance • Access to PLC, scanner, servo drives • Energy-efficient regenerative drive technology Scanner Software • Processes 3D light-section profiles • Calculates defect volume and coordinates • Unlimited product programs • Intuitive operator interface High-Pressure Injection Process 1. Melting of thermoplastic material Hnodpfxsx Dmdho Aacsk 2. Pressure and temperature regulation 3. Targeted injection into defect 4. Immediate cooling 5. Minimal surface residue • Benefits: • Low material usage • Excellent adhesion • No alteration of surrounding wood structure System Architecture • Melting unit • Heated hoses • Injection head • Cooling plate • Cooling unit with supply/return flow

Year of construction: 1998, condition: used, Technical details: profile width: 50 mm work height max.: 950 mm interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Hnjdpfx Aeu Ibuwoacjk Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) -drilling unit with clamping cartridge (hotizontal) -Boring with clamping cartridge (vertical down) -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal 2 transport units: motor driven -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm -track width 2.300mm *

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 100 mm, travel distance Y-axis: 550 mm, Manufacturer: Wittmann Model: W 702 Year of manufacture: 2007 Hnjdpjyk U Hrsfx Aacsk Can be inspected and tested!

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 100 mm, travel distance Y-axis: 550 mm, Manufacturer: Wittmann Model: W 702 Year of manufacture: 2007 Hodpfx Aajyk U Enjcjnk Can be inspected and tested!

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 100 mm, travel distance Y-axis: 550 mm, Manufacturer: Wittmann Model: W 702 Year of manufacture: 2007 Hedpeyk U D Djfx Aacenk Can be inspected and tested!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,300 mm, Handling System Geiger MotionLiner 10.0 XD Stock no.: 503652 Machine/Device type: Handling Manufacturer: Geiger Model: MotionLiner 10.0 XD Year of manufacture: 2020 Handling weight: 10 kg Stroke X-axis: 600 mm Hedpsxuhluefx Aacjnk Stroke Y-axis: 1200 mm Stroke Z-axis: 2300 mm Interface: EUR 67 Accessories: EASYTouch HT320Z