Used Veeco Dektak 8 for sale (34,918)

Condition: excellent (used), Year of construction: 2018, conveyor belt length: 4,000 mm, conveyor belt width: 2,000 mm, total length: 4,000 mm, total width: 2,000 mm, total height: 650 mm, overall weight: 6,000 kg, Platform height: 650mm Platform length: 4000mm Rcsdoyh H Sfepfx Akhsb Platform width: 2000mm Max. loading capacity:60T Number of axes: 4 Number of wheels: 32 Wheel Ø: 425mm Length: 4000mm Width: 2000mm Height: 650mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1990, number of straightening rollers: 23, roller diameter: 80 mm, Number off straightening rolls 23 units Roll diameter 80 mm Rsdpexyhhasfx Akhscb Minimum thickess 0,5 mm Maximum thickness 12 mm Digital readout system position rolls Fine adjustment down feed   Rolling width: 1450mm Rolling thickness 3x toproll Ø:12mm Rolling thickness 5x toproll Ø:16mm Top Roll Ø: 80mm Bottom Roll Ø: 80mm Number of rolls: 23 Rolling speed: 3,75 - 15 M/Min Adjustiment lower roll: 26mm/min. Power: 30kW Length: 3000mm Width: 4000mm Height: 2400mm Weight: 28000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), working width: 2,550 mm, sheet thickness (max.): 8 mm, power: 15 kW (20.39 HP), Guillotine SAFAN - HT 255-8 MACH-ID 9237 Make: SAFAN Type: HT 255-8 Control: ARA TOUCHSCREEN Touchscreen backgauge Maximum sheet thickness: 8mm Max. cutting length: 2550mm Strokes on full length: 19mm Strokes in short 1000 length:40 Cutting angle: 0,5 - 2 Gr° Length backgauge: 0 - 1000mm Number of down holders: 17 Approach speed: 200mm/sec. Power: 15kW Length: 3400mm Width: 2300mm Height: 2150mm Weight: 8900kg Redpexdb Eyefx Akhocb

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 2,340 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, table width: 750 mm, table length: 2,900 mm, table load: 2,800 kg, Full enclosure with vacuum extraction Roller shutter door for crane loading Pick-Up station for 3 angled milling head  Face machining possible to generously sized areas Distance spil to table 140 - 740 mm Pendel screen for splitted manufacturing Coolant tank filtration 350 Liter HR410 Handwheel HeidenHain Double LTA Oil Mist   Flexible, high-precision machining of large and complex parts, with reliable German build quality. X - Travel: 2340mm Y - Travel: 800mm Z - Travel: 600mm Table Length: 2900mm Table Width: 750mm Table load: 2800 Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 27kW Speeds / ranges: 8000Rpm ATC / revolver: 40 Coolant through spindle / Bar:20 Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 6200mm Width: 3500mm Rsdex Sxx Njpfx Akhecb Height: 3600mm Weight: 13000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 7.5 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 13,055 kg, empty load weight: 1,945 kg, loading space volume: 10.4 m³, loading space width: 2,300 mm, loading space length: 6,000 mm, loading space height: 6,000 mm, Price on request. The price is ex-stock 33106 Paderborn! Quantity discount possible for purchase of multiple containers. *Leasing/hire-purchase available!* 3 units available immediately from stock, RAL 7043 2 units available at short notice, other RAL colors on request Technical description: Other designs and sizes available ex-warehouse Paderborn. You are welcome to view our current stock on our homepage. Roll-off containers according to DIN - Internal dimensions: 6000 x 2300 x 750 mm (internal length) - Usable volume: 10.4 cbm - Tare weight: 1945 kg - Floor: 5 mm S235 Rcjdpsy Tmrgjfx Akhob - Side walls: 3 mm S235 - Front wall inclined high - All sheets and profiles fully welded - Double-wing door with safety lock - Standard ladder according to UVV, bolted, galvanized - 8 lashing eyes in floor plate, loadable up to 2.5 t - Container inspected and certified according to DGUV Rule 114-010 - Floor to side wall connection 90° - Cross members U 90x55x4 mm - Cross member spacing 750 mm - Hook diameter 50 mm, S355 - Hook height 1570 mm - Top frame round tube Ø 89×6.3 mm - Net hooks - All movable parts greaseable - Steel discharge rollers 159×6.3 mm, length 300 mm - Warning markings according to DIN 67520 - Internal and external zinc phosphate primer, outside coated with alkyd resin paint (80-100 μ) - Permissible total weight 15,000 kg Subject to errors and prior sale. Photos are for illustration purposes only! The price is per piece plus 19% VAT. If you have any questions, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 5,095 h, load capacity: 2,500 kg, lifting height: 6,000 mm, free lift: 2,025 mm, fuel type: gas, mast type: triplex, construction height: 2,595 mm, fork length: 1,200 mm, empty load weight: 3,560 kg, total length: 2,640 mm, drive type: Treibgas, construction width: 1,150 mm, Internal combustion forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tire type: Superelastic Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire condition: 80 - 100% Description: Repainted in grey and green (RAL 6001). New front tires, black. Inspection including oil and filter change, flawless acceptance according to FEM, including documentation. Side shifter, Rcsdpfoy A Actex Akhob 3rd valve, 4th valve, rear work light, front work light, overhead guard, windshield, full free lift, CE certificate.

Condition: used, Year of construction: 2005, 2005 | Iveco Trakker AD410T44 8×4 | Used Tipper Truck | 395924 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 35400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Rcedpfezadqlex Akhjb 46 inspection points 41 approved ✅ 5 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good general and operational condition. See details below. Technical inspections up to date until February 5, 2027. Very torquey 13-liter engine, the gearbox functions very well. Disc brakes on axles 1 and 2 (good condition) and drum brakes on axles 3 and 4. Trailer connection for signaling and ABS (no brake hands, GVWR 40T). The vehicle is a first-hand with a full history. Recent repairs: cylinder head gasket, flywheel, and clutch kit at 394360 km; steering linkage and ball joints at 373171 km; starter at 383861 km; axle pivots pins and bushings on axles 1 and 2 at 297850 km. Gearbox overhaul at about 250000 km. Round bucket length 5800 mm. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40818 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 248,500 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, first registration: 04/2020, next inspection (TÜV): 04/2027, emission class: euro6, color: white, number of seats: 8, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, VW T6.1 Special equipment: - Discover Media Streaming & Internet audio navigation system - Driver assistance system: front and rear park assist - Cruise control system (tempomat) incl. speed limiter - Heated rear window - ISOFIX child seat mountings on rear seat - Multifunction display Plus - Seat package: 8-seater Additional equipment: - Passenger airbag deactivatable - Driver and passenger airbags - Traction control system (ASR) - Electrically adjustable and heated exterior mirrors - Convex exterior mirrors - Brake assist (HBA) - Multi-collision brake - Lockable glove compartment - Fuel tank: 70 L - Bluetooth mobile phone interface Rcsdjy Hblujpfx Akhjb - Engine 2.0L – 110 kW TDI - Non-smoker package - Wheelbase 3400 mm - Low-emission according to Euro 6d-TEMP - Engine start/stop system - Lashing points in load compartment - Seat belt warning system - Heat-insulating glazing - Central locking with remote control and interior operation - TÜV due: 04/2027 Subject to errors and prior sale. Internal vehicle number: 11424

Condition: used, maximum load weight: 30,200 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 01/2021, next inspection (TÜV): 06/2027, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2021, Equipment: ABS, 2-axle DOLL LOGO 21 with 8 bogies First registration 01/2021, from the first owner Rsdpezahuzofx Akhocb Both axles with forced steering and can be steered remotely Hydraulic displacement system for the 3 rear bogies, operable from the crane operator’s seat 2x 12-ton axles BPW with drum brakes WABCO trailer EBS Length 10,715 mm Extendable by -1,800 to +4,500 mm Loading height 1,640 mm Unladen weight 7,800 kg Tires 8-ply 315/80 R 22.5, tread depth 70 to 80% 8-bogie version for the transport of: 4 x 2 meters 4 x 3 meters 3 x 4 meters 2 x 5 meters 2 x 6 meters and long timber up to 21 meters 8 DOLL steel bogies, type MAMMUT 16 DOLL rectangular supports, load capacity up to 9,000 kg per pair Lighting: full LED 4 LED work lights Central lubrication system Technically in perfect condition RENTING is the new BUYING, also available for IMMEDIATE RENTAL from us-----

Condition: like new (used), Year of construction: 2022, operating hours: 12,719 h, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 850 mm, nominal power (apparent): 21 kVA, controller manufacturer: Heidenhain TNC 640 mit CELOS, workpiece weight (max.): 2,000 kg, total height: 3,200 mm, total length: 4,500 mm, total width: 7,100 mm, table width: 850 mm, table length: 2,350 mm, rotational speed (min.): 15,000 rpm, spindle speed (min.): 15,000 rpm, Year of construction: 2022 CNC controller: Heidenhain TNC 640 mit CELOS Axes X-axis travel mm: 2000 Y-axis travel mm: 800 Z-axis travel mm: 850 C-axis degrees: 360º (0,001) B-axis degrees: ±120 Rapid traverse m/min: 50 Acceleration in the axes m/s2: 5 Worktable Table dimensions mm: 2350x850 Max. workpiece weight kg: 2000 Milling/turning table nc: Table dimensions mm: Ø800 Max. workpiece weight kg: 800 Table rotation speed rpm: 50 Spindle Spindle speed rpm: 15000 Spindle drive power kW: 21/16 (40%ED/cont) Spindle torque Nm: 111/85 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 40 Tool changer: Double gripper With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 400 Max tool weight kg: 8 Chip-to-chip time s: from 7,5 Equipment Chip conveyor Rigid table with integrated rotary table Infrared probe Internal cooling lubricant supply Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Mist collector NC swivel rotary table Preparation for the use of the 3D quickSET MPC – Machine Protection Control Automatic door Automation interface Machine running times Under power: 18669 Spindle Working: 12719 Basic machine dimensions / weight Rcedpfx Aey Shgvjkheb Length mm: 4500 Width mm: 7100 Height mm: 3200

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 780 h, load capacity: 1,600 kg, lifting height: 3,500 mm, free lift: 75 mm, fuel type: electric, mast type: simplex, construction height: 2,200 mm, fork length: 1,200 mm, empty load weight: 3,300 kg, total length: 1,900 mm, drive type: Elektro, construction width: 1,100 mm, Electric 4-wheel forklift Load centre: 500 mm ISO class: ISO class 2 = 1.000 - 2.500 kg Mast type: standard Technical condition: good Front tyres type: superelastic Front tyres condition: 60 - 80% Rear tyres type: superelastic Rcedpfex A I U Eex Akhjb Rear tyres condition: 60 - 80% Battery voltage: 52V Battery capacity: 300Ah Battery year: 2020 Equipped with sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, roof cover, front windscreen, heater, STVZO road approval, full cabin, impulse control, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 1,360 h, load capacity: 2,000 kg, lifting height: 7,500 mm, free lift: 2,500 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, fork length: 1,200 mm, empty load weight: 3,750 kg, total length: 2,000 mm, drive type: Elektro, construction width: 1,150 mm, Electric four-wheel forklift Rcodjy S Hc Aspfx Akhjb Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: normal Front tire type: Superelastic Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire condition: 60 - 80% Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, overhead guard, windshield, impulse control, full free lift, CE certificate

Condition: good (used), first registration: 03/2011, Year of construction: 2011, Empty weight: 34,500 kg Body brand: GOLDHOFER STHP/XLE 8 (3+5) LOWLOADER Rcsdpfx Akevfnyqohsb Extendable body: Yes Technical condition: good Optical condition: good

Condition: used, Year of construction: 2018, operating hours: 21,083 h, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, fork length: 1,790 mm, fork width: 1,200 mm, total height: 2,700 mm, total length: 3,200 mm, total width: 1,460 mm, color: yellow, Empty weight: 6.585 kg Lifting capacity: 4.500 kg - Year: 2018 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: E700214 - Operating hours: 21083 - Lifting capacity: 4500kg - Lifting height: 4000mm - Overhead clearance: 2710mm - Free lift: 0mm - Fork length: 1790mm - Maximum fork width: 1200mm - Minimum fork width: 250mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Half cabin, Weighing system, Work lights - Mast: Duplex - Drive: Diesel - Motor brand: GCT - Transport dimensions: 3200mm x 1460mm x 2700mm (l x w x h) - Transport weight [kg]: 6585kg Rcjdpfey N Uixsx Akhsb - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: good (used), mileage: 158,900 km, power: 206 kW (280.08 HP), first registration: 12/2022, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,300 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, number of seats: 2, total length: 9,640 mm, total width: 2,550 mm, total height: 3,670 mm, permissible axle load (axle 1): 7,100 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 72,000 mm, loading space width: 24,800 mm, loading space height: 24,800 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, parking heater, power assisted steering, power mirror, spoiler, tail-lift, traction control, = Additional options and accessories = - Roof hatch - Roof spoiler - Differential lock - Euro 6 Redsy D Aldepfx Akhocb - Remote central locking - Wooden loading platform - Height-adjustable steering wheel - Air suspension - Reversing camera - Side door - Auxiliary heating - Decals (applied) = Further information = General information Number of doors: 2 Registration number: 88-BTH-1 Technical information Number of cylinders: 6 Engine displacement: 7,698 cc Front axle: Max. axle load: 7,100 kg; Steered Rear axle: Twin tires; Differential lock; Max. axle load: 11,500 kg Weights Unladen weight: 8,329 kg Payload: 9,971 kg Gross vehicle weight: 18,300 kg Functional Tail lift: D'HOLLANDIA DHLM.20, rear tailgate, 2,000 kg Maintenance, history and condition APK (Technical Inspection): valid until 08.2026 Technical condition: good Visual condition: good

Condition: used, mileage: 92,000 km, power: 61 kW (82.94 HP), first registration: 06/2002, overall weight: 2,950 kg, fuel type: diesel, color: beige, next inspection (TÜV): 06/2027, gearing type: mechanical, emission class: euro3, Year of construction: 2002, total length: 5,585 mm, total width: 1,933 mm, total height: 2,550 mm, number of seats: 9, 1st hand. Direct from service with a German aid organization. Rjdpfx Aewvc Naskhocb Well-maintained Volkswagen with full service history. Garage-kept vehicle. Oil service NEW in June 2025. Partial brake replacement NEW in June 2025, with workshop invoice. The file with numerous invoices and inspection reports from the vehicle’s history is available and will be handed over to the buyer. Technical inspection (TÜV) valid until 06/2027. The vehicle was always registered as a "closed passenger car (PKW)" ex works. (The blue lights are entered in the documents due to the resulting increased exterior dimensions. For civilian registration, these must first be removed and deregistered from the paperwork before re-registration. The vehicle type "PKW" itself remains unchanged and valid in this process.) 9 seating positions permissible / 8 seats currently installed. Floor anchorages (tracks for up to 3 wheelchairs) and a wheelchair ramp for disabled transport are alternatively entered in the vehicle documents. Driver airbag. Radio. Tow bar with ball head, braked towing capacity increased to 2,300 kg with certification. Unbraked towing capacity is 750 kg. Good Goodyear winter tyres from 2018 (with snowflake symbol in line with current legal requirements). Five-cylinder TDI diesel engine, 2,461 cc, robust and smooth-running. Starts and runs perfectly. Emission standard Euro 3. 5-speed manual transmission. 131 km/h max speed. Unladen weight: 2,115 kg. Gross vehicle weight: 2,950 kg. The LT 28 is immediately available and ready to drive. This offer is only valid for commercial traders, freelancers, farmers, and forestry operators, as well as emergency services and public authorities. Sale to private consumers is strictly excluded. Subject to prior sale and errors. Sales price in accordance with §25a UstG (margin scheme. Gross = net. VAT cannot be separately shown or deducted from the price and will not be added to the purchase price).

Condition: used, current capacity 8,0 kVA throat 80 - 480 mm contact pressure capacity 17 - 235 daN horn spacing 140 mm mm Redey Ty Dcspfx Akhjcb rated capacity 8,0 kVA voltage 380 V total power requirement 17,8 kVA weight of the machine ca. 77,5 kg dimensions of the machine ca. 0,35 x 0,80 x 1,05 m - Serial-No.: 18310126 - 2

Condition: new, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 9,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 62,000 kg, coolant supply: 36 bar, workpiece weight (max.): 62,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, LAGUN CM 8 Travelling Column Milling Machine The LAGUN CM 8 is a highly dynamic travelling column milling machine designed for the precise machining of large and complex workpieces. Ideal for both single-piece production and series manufacturing with the highest demands on accuracy, stability, and flexibility. Your benefits at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly through JMT ✔ Leasing/purchase or financing available ✔ Maximum flexibility thanks to the travelling column design ✔ 24-month warranty Rjdpfxjm Tv D Ae Akhecb Why LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING), known for its robust construction, high dynamics, and decades of experience in building milling machines. These machines stand out for their reliability, ease of maintenance, and cost-effective operation. Technical features: Control: Two HEIDENHAIN TNC 7 controls – one at the front of the machine and one at the rear in the enclosure 2 x HEIDENHAIN 19" TFT displays HEIDENHAIN motors, measurement systems, and electronic handwheels HR-510 Cooling: Internal coolant supply (IKZ) 36 bar Tool changer: Automatic tool changer, 60 positions Chip removal: Hinged belt conveyor Preparation: Preparation for rotary table / 4th axis Enclosure: Three-sided perimeter enclosure Accuracies: Positioning accuracy: ±0.040 mm Repeatability: ±0.008 mm Your advantages as a JMT customer: ✔ Official LAGUN distributor in Germany ✔ Technical support and service on-site ✔ Fast spare parts supply ✔ Training and commissioning included ✔ Reference machines available in Germany Contact us – we are happy to advise you and provide you with a tailored offer.

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, table length: 10,900 mm, feed length X-axis: 10,200 mm, feed length Y-axis: 1,960 mm, feed length Z-axis: 1,850 mm, planing height: 1,850 mm, planing width: 1,750 mm, spindle speed (min.): 9,000 rpm, WALDRICH COBURG hydraulic double-column planer and grinding machine Control: conventional relay control Operation: original Waldrich Coburg main control panel with buttons, rotary switches, analog displays, and emergency stop Display / Positioning: 2 x HEIDENHAIN POSITIP digital position indicators / positioning aids on the main control panel Additional control units: Siemens SIMATIC HMI KTP700 / KTP400 for grinding support and grinding attachment Partial modernization 2021: approx. EUR 170,000 Ongoing modernizations / retrofits up to 2021 Retrofitted grinding attachment Modernized grinding support Siemens / Lenze drive technology Control cabinet and modernization documentation available Work area Largest planing width / clamping: 1,750 / 1,790 mm Largest travel height: 1,850 mm Total clamping area: 10,900 x 1,500 mm Additionally documented: 2 x 4,750 x 1,500 mm Usable table / length value according to drawing: approx. 10,200 mm T-slots: 7 pieces T-slot spacing: 210 mm T-slot width: 28 mm Smallest width of cross rail / traverse: 420 mm Cross rail / column / supports Number of cross rails: 2 Number of columns: 2 Cross rail horizontal travel: 1,960 mm Cross rail vertical travel: 250 mm Column horizontal travel: 550 mm Column vertical travel: 1,850 mm Support swiveling: +/- 60° Support folding: +/- 25° Speeds / Feeds Working speed: 5 - 60 m/min Return speed: 5 - 60 m/min Cross planer carriage vertical: 0.1 - 7.5 mm Cross planer carriage horizontal: 0.1 - 15 mm Column carriage vertical: 0.1 - 7.5 mm Column carriage horizontal: 0.1 - 7.5 mm Redpfjy Ubn Sjx Akhocb Dimensions / Weight / Connection Space requirement: 22.67 x 3.97 m Height: 3.95 m Weight: approx. 51,872 kg Voltage: 500 V Fuse rating: 125 A Type of current: three-phase Frequency: 50 Hz Grinding support / grinding attachment Grinding support with grinding spindle Guideway system with base and Z-axis Y-axis grinding support converted to ball screw spindle 40 x 10 Pre-tensioned double nut Single-axis control for feed axis Angle gearbox motor 72 Nm Synchronous servo motor 11 Nm with absolute encoder Rittal compact control cabinet Grinding spindle / grinding wheel drive Siemens asynchronous motor grinding spindle 9 kW at 1,500 rpm / 57 Nm 10 kW at 1,750 rpm / 55 Nm Max. speed: 9,000 rpm Siemens SINAMICS drive technology Siemens SIMATIC control unit grinding support / grinding attachment Lenze L-force axis drive for Y-axis grinding support Separate control cabinets for grinding wheel drive and Y-axis grinding support Cooling / Hydraulics Schimpke DK150-V cooling unit Cooling capacity approx. 17.5 kW Cooling medium: oil ISO VG46 Gear pump approx. 135 l/min at 10 bar Pump motor approx. 5.5 kW Transformer 500 V to 400 V Separate hydraulic / unit block available Mechanics / Overhaul Partial overhaul of bed / table, crossbeam with slides Y1 / Y2, Z1-axis planer support and lubrication system Machine bed scraped Bed geometry created Table scraped Guideways reworked Slides Y1/Y2 scraped Strips coated and scraped Steel belt renewed Central lubrication system expanded Scrapers renewed Crossbeam lift repaired Worm shaft, drive shaft center, coupling pieces and roller bearings renewed Bellows X-axis renewed Condition / Equipment Column area newly painted Table and functional surfaces in very good condition Accessories, assemblies and spare parts available

Condition: good (used), Year of construction: 2009, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system, cartridge filter unit, cartridge filter -Filter system: with vibrator -Type: TMS 8/10 -Filter area: 8.5 m² -Vibration motor: Motor power 0.06 kW Rsdpfxoyh Hp Re Akhscb -Inlet connection: Ø 200 mm -Outlet connection: Ø 300 mm -Dimensions: 1070/680/H2530 mm -Weight: 243 kg

Condition: good (used), Year of construction: 1998, operating hours: 385 h, functionality: fully functional, color channels: 8 color, paper weight (min.): 40 g/m², paper weight (max.): 400 g/m², paper width (min.): 280 mm, paper width (max.): 720 mm, paper height (min.): 400 mm, paper height (max.): 1,020 mm, total length: 720 mm, total width: 11,500 mm, total height: 3,200 mm, space requirement length: 13,500 mm, space requirement width: 2,500 mm, space requirement height: 2,500 mm, counter reading (black): 385, counter reading (color): 385, year of last overhaul: 1998, type of input current: three-phase, input current: 200 A, input voltage: 400 V, Equipment: documentation/manual, HEIDELBERG SPEEDMASTER SM 102-8-P OFFSET PRINTING PRESS 8 Colors + Perfecting 4+4 | CPC 1-04 | Autoplate | In Production Year: 1998 Impression Count: 359 Million Availability: Immediate HIGH PERFORMANCE HEIDELBERG SPEEDMASTER 102-8-P AVAILABLE FOR IMMEDIATE SALE This well-maintained Heidelberg Speedmaster SM 102-8-P is currently visible in production and operating in Good condition. Equipped with advanced Heidelberg automation systems, this machine delivers high productivity, stable register accuracy, and premium print quality for commercial printing operations. The machine with complete NEW ink rollers and dampening rollers for all 8 printing units. Ideal for: • Commercial printing • Packaging printing • Magazine production • High-volume offset printing • Brochures, catalogs & advertising materials • International print production facilities TECHNICAL CONFIGURATION: • CP Tronic Control System • CPC 1-04 Ink Control Rcsdpfxsy Sg Dms Akheb • Alcolor Dampening System • Autoplate Semi-Automatic Plate Changing • Auto Blanket Wash • Autoregister • Electronic Double Sheet Control • Electronic Side Lay Control • High Pile Delivery • Sheet De-curler • Antistatic System • Steel Plate in Feeder & Delivery • Super Blue Package • Technotrans Refrigeration & Re-circulation • Weko Powder Spray MACHINE CONDITION: • Machine visible in production • Good mechanical condition • Full new ink rollers will be installed • Full new dampening rollers installed • Clean and professionally maintained dismantling, loading, and shipping assistance can be arranged. Contact us today for: Additional photos & videos Heidelberg SM 102, Heidelberg Speedmaster, 8 color 4+4 offset press, perfecting printing press, used Heidelberg printing machine, commercial printing press, Heidelberg CPC 1-04, offset printing machine , Heidelberg Autoplate, Heidelberg SM102-8P, industrial printing equipment, used offset press for sale, Heidelberg printing machinery, sheetfed offset press, Heidelberg printing machine

Condition: used, Year of construction: 1990, Technical details: plate thickness: 8 mm Rcedpfxsu Ictbj Akheb cutting range: 300 x 300 mm table-size: 1100 x 900 mm voltage: 380 V / Hz Weight approx.: 1,7 t dimension machine xH: 1,3 x 1,2 x 1,5 m For notching of 90° sheet metal segments, works hydraulically. On the table are 2x rulers 300mm 90° offset. T-slot according to DIN 680: a=12mm, h=21mm, b=22mm, c=14mm with length = 1x 330mm and 2x 700mm Operation via control panel and foot switch *

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm Rcsdpsvc Aklefx Akheb dimension machine xH: 3,3 x 1,5 x 1,45 m dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 total power requirement: 72 kW weight of the machine ca.: 18,0 t dimensions of machine: LxBxH: 2100x3400x2600 mm dimensions electric cabinet: Nr.1: LxBxH: 1000x850x2300 mm Redeu Idvwjpfx Akhocb dimensions electric cabinet: Nr.2: LxBxH: 1250x850x2500 mm dimensions electric cabinet: Nr.3: LxBxH: 1000x850x2100 mm dimensions electric cabinet: Nr.4: LxBxH: 1000x500x2350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - left 3x drill & mill spindle and 2x thread cutting spindle - right 2x drill & mill spindle and 2x thread cutting spindle and 1x U-Axis such as 2x thread cutting spindle slidable, 2x drill and milling spindle from that one slideable and 1x U-axis slideable - 1. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2. thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 weight of the machine ca.: 17,0 t total power requirement: 83,0 kW dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1:LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxBxH: 650x600x1700 mm dimensions electric cabinet: Nr.4: LxB.H: 1000x500x1350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - left 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel Redpfx Aju Idxfekhjcb - manual switch i.D. *