Used Webster & Bennett 48" for sale (3,778)

Condition: used, Year of construction: 1997, Pressing force: 700 kN Throw/counterstroke: 760 mm Hub steplessly adjustable between 0 and 75 mm Laodozyggbopfx Anxjg 48 strokes per minute at 20 mm stroke Locht e.g. 30 mm diameter in 20 mm normal steel Large support table with folding cam Assortment of tools is included in the price and can be customized Total weight of the machine approx. 2,700 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 145 h, load capacity: 2,000 kg, lifting height: 3,805 mm, fuel type: electric, mast type: telescopic, construction height: 2,460 mm, battery capacity: 690 Ah, battery voltage: 48 V, fork length: 1,000 mm, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 200/50 - 10, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 3,589 kg, total height: 2,460 mm, total length: 2,150 mm, total width: 1,100 mm, fuel: electricity, Equipment: sideshift, BT C3E200 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 2.000 kg Lifting height: 3.805 mm Closed height: 2.460 mm Lodez Aqd Njpfx Anxjag Mast: Standard (2W380) Fork length: 1.000 mm Fork carriage: 2 A Drive: Elektro 48V Battery: 48 V 690 Ah v. 2006 Charger: Dreiphasig 48 V 80 A not tested Tyres: Superelastik SE 200/50 - 10 (70%) / 18 x 7 - 8 (70%) Service weight: 3.589 kg Length: 2.150 mm Width: 1.100 mm Year of manufacture: 2006 Operating hours: 145 h Condition: working condition EQUIPMENT 3rd valve, Pulse control ATTACHMENTS Sideshift Internal no.: 1309230 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode Lodpfx Aoztl Sconxeag - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 18,000 rpm, travel distance X-axis: 1,020 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 805 mm, controller manufacturer: FANUC, controller model: 31i-b5, spindle motor power: 22,000 W, table load: 800 kg, number of slots in tool magazine: 40, number of axes: 5, This 5-axis DN SOLUTIONS DVF 8000 was manufactured in 2022. It features impressive X-axis travel of 1,020 mm, Y-axis travel of 850 mm, and Z-axis travel of 805 mm. The machine includes a maximum workpiece diameter of 1,000 mm and a spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DVF 8000 universal machining centre we have for sale. Contact us for further details. • 15" color touchscreen display • CE certified • Metric configuration • Power supply: 3-phase AC 380V / 50Hz • Number of axes: 5 (X, Y, Z, A, C) • Simultaneous 5-axis machining • Absolute feedback system (absolute pulse coder on A- and C-axis) • Table diameter: 800 mm • Maximum workpiece diameter: 1,000 mm • Maximum workpiece height: 630 mm • Spindle motor power: 22 / 18.5 kW • Spindle taper: HSK-A63 • Tool holder type: HSK63A • Flood coolant pump: 2.5 kW / 0.44 MPa / 100 L/min • Through-spindle coolant: 4.0 kW / 2.0 MPa (20 bar) • Tool load monitoring • Portable MPG handwheel • Automatic power off • Program storage: 10,240 m (4 MB) • 1,000 program capacity • 400 tool offset pairs • 48 work coordinate systems • Large capacity memory: 2 GB • Data server & memory card: 2 GB • Embedded Ethernet • iHMI easy operating system (EZI & Machining Cycle) Lajdszlg Ngepfx Anxjg • DSQ1 (AICC II – 200 blocks) Additional equipment • Hinged belt chip conveyor (rear side) • Cyclone filter system • Renishaw probe ready (RMI-Q) + software • External power transformer • Electrical line filter • Machine lifting hooks

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Laedpfxjz Aagge Anxsg Bale length x width x height: 750 x 1200 x 750

Condition: used, maximum load weight: 29,220 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2012, loading space length: 9,000 mm, loading space width: 2,440 mm, loading space height: 2,200 mm, loading space volume: 48 m³, Year of construction: 2012, Equipment: ABS, Air suspension, lift axle, SAF disc, EBS (Electronic Braking System), aluminum rims, aluminum folding supports, spare wheel holder, access ladder, PVC half-shell mudguards, foldable aluminum underrun protection (UFS), right-side lateral protection (AFS), combination rear wall, sliding mechanism, catwalk with ladder, PVC rolling tarpaulin with central locking, 2x WZK, reflective plate, loading pressure gauge Laedpsy Dy Aaefx Anxsg

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) Lsdpovpalaefx Anxoag ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: reconditioned (used), Year of construction: 1998, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 067-1045 from 1998 first owner, color channels: 2 kleuren rechtdoor, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 100 mm, paper height (max.): 365 mm, total length: 2,765 mm, total width: 1,523 mm, total height: 1,560 mm, space requirement length: 2,765 mm, space requirement width: 1,523 mm, space requirement height: 1,560 mm, type of input current: three-phase, input current: 20 A, input voltage: 200 V, Equipment: documentation/manual, In contrast to the previous offer, the machine has been thoroughly cleaned and inspected. Several replacements and repairs have been carried out, including new timing chains, a new drive chain for the feeder, replacement of some idler rollers, and all grippers on all drums have been made of stainless steel and are now functioning smoothly, ensuring excellent register. The rollers are rated approximately 7 out of 10; they are slightly glazed and close to their minimum dimensions, but a period of approximately 1500 to 2500 hours should still be manageable without any significant issues, which is what has been promised! 2-color offset press with high-quality construction, featuring hardened and ground gears, cylinders running in class P5 preloaded tapered roller bearings (sets of 2), and lubricated via oil bath and pressure lubrication. B3 format (35x50 cm) in a conventional standard configuration (no autoplate or cocking), but with an alcohol dampening system with large rollers based on the SM52 design, producing excellent print quality. From the original owner who did not maintain the machine properly (cosmetically); however, a comprehensive maintenance history is available, performed by the importer. The latest meter reading in the history is 11.6 million impressions from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then. NEXT STEPS: We will check the machine against the current meter reading and ensure correct and reliable operation. C)2 dry ice cleaning is being considered, as is a complete overhaul of the machine, as the mechanical condition is exceptionally good. However, this would increase the cost, so the machine is currently offered in its current condition, "as is", EXW our warehouse in Son, NL (5,500,- EXW, NOW after refurbishment €7,500,- EXW van Rooij). Any type of inspection is, of course, permitted. We guarantee that the machine is free from cracks, cylinder damage and/or repairs, and that the gears are free from damage. The rubber rollers are glazed and need to be replaced. The Royce ECO circulating pump and cooling system for the dampening unit shows signs of corrosion. Some specifications, for all specifications, open the PDF at the bottom of this page. Maximum printing speed 12,000 sheets per hour Maximum paper size 365 x 520 mm Minimum paper size 100 x 148 mm or 148 x 100 mm Maximum printing area 350 x 510 mm Rubber blanket size 500 x 520 x 1.9 mm Plate size 400 - 410 x 510 mm Dampening roller in this case for film dampening is 1 (62mm) Number of ink rollers 4 pieces of 46, 48, 52 and 54 mm Feeder stack height maximum 850 mm Delivery stack height max 360 mm Electrical connection 3 phases 200 VAC 50HZ (primary), but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC Total power consumption 7kW Laodpsv Nv Taefx Anxsg Primary fuse rating at least 20A Dimensions LxWxH = 2765 x 1523 x 1560 mm Net weight 4000 kg

Condition: used, functionality: fully functional, machine/vehicle number: 2481918, Year of construction: 2019, load capacity: 2,000 kg, lifting height: 5,000 mm, free lift: 115 mm, load center: 500 mm, fuel type: electric, construction height: 3,870 mm, power: 6 kW (8.16 HP), motor manufacturer: Toyota, battery capacity: 660 Ah, battery voltage: 48 V, battery weight: 1,013 kg, fork carriage width: 920 mm, fork length: 1,000 mm, fork width: 120 mm, fork thickness: 35 mm, ground clearance: 90 mm, turning radius (outer): 1,811 mm, front tire type: superelastic tires (non-marking), front tire size: 200/50-10, rear tire type: superelastic tires (non-marking), rear tire size: 16x6-8, overall weight: 3,261 kg, total height: 2,120 mm, total length: 3,122 mm, total width: 1,152 mm, color: red, Equipment: UVV, pallet forks, Technical data Year of manufacture: 2019 Ljdpfxsyqzn No Anxsag Drive: electric Motor: 6x2 kW Load capacity: 2.00 t Load center: 500 mm Overall dimensions (L x W x H): 3.12 m x 1.15 m x 2.12 m Fork dimensions (L x W x H): 1.00 m x 0.120 m x 0.035 m Turning radius: 1.81 m Weight: 3261 kg Front tyre size: 200/50-10 Rear tyre size: 16x6-8 Lifting height: 5.00 m Free lift: 115 mm Travel speed: 20 km/h Max. gradeability with/without load: 13.4% / 24.6% Mast height extended: 3.87 m Fully functional, general signs of use, UVV

Condition: used, functionality: fully functional, Year of construction: 2023, total length: 584 mm, total height: 483 mm, total width: 914 mm, overall weight: 48 kg, We are offering our two 3D printers, both in full working order and in good condition. These units are only being sold together. Markforged Onyx Pro – Professional Composite 3D Printer: Total weight: 48 kg Dimensions: 584 x 330 x 355 mm Printing technology: Fused Filament Fabrication (FFF) + Continuous Fiber Reinforcement (CFR) Build volume: 320 x 132 x 154 mm Print bed: Kinematic coupling, accuracy up to 160 µm Extruder: 2 nozzles (0.4 mm plastic; 0.9 mm fiber) Fibers: Continuous glass fiber for reinforced components Laser-assisted calibration: automatic leveling Layer height: 100 µm (standard); up to 250 µm Materials: Onyx (Nylon/Carbon), Precise PLA, Smooth TPU Tensile strength: approx. 590 MPa (significantly higher than ABS) Software: Markforged Eiger (Cloud) Connectivity: Wi-Fi (802.11 b/g/n) Operating hours: 6,236 h Markforged X5 – Industrial Composite 3D Printer: Weight: 48 kg Dimensions: 584 x 483 x 914 mm Printing technology: Fused Filament Fabrication (FFF) + Continuous Fiber Fabrication Build volume: 330 x 270 x 200 mm Lsdpfx Ajy Rq Hijnxjag Print bed: Kinematic coupling, accuracy up to 80 µm Extruder: 2 nozzles (0.4 mm plastic; 0.9 mm fiber) Fibers: Continuous glass fiber for reinforced components Laser-assisted calibration: automatic leveling Layer height: 100 µm (standard); down to 50 µm (minimum); up to 250 µm (maximum) Materials: Onyx, Onyx FR, Onyx ESD; glass fiber, Precise PLA, Smooth TPU Software: Markforged Eiger (Cloud) Connectivity: Wi-Fi (802.11 b/g/n) Operating hours: 11,822 h Both machines are used and fully functional. Application areas: Functional parts, prototypes, end-use parts, tools, and fixtures for automotive, aerospace, medical technology, mechanical engineering, and defense. Scope of delivery: Standard Eiger software, power supplies, basic materials, toolkits. Optional addons available on request. Location on request! Collection or transport can be arranged.

Condition: good (used), Year of construction: 2006, machine/vehicle number: 4806067, Offer 25059 Technical data: - Pipe bending capacity at 45 kg / mm² up to Ø 48 X 3.5 mm - Solid material up to 30 mm - Bending angle 0 - 180 ° - Largest average bending radius Rm 225 mm - Smallest inner bending radius Ri 10 mm - Drive 220 V / 1.7 Kw - Space requirement approx. W 400 x H 950 x D 600 mm Lasdpfx Ansv Dux Djxsg - Weight approx. 100 kg - with - Bending angle preselection - Digital bending angle display + bending angle fine adjustment - Bending tools, Ø ½“ R 67 mm, Ø 1“ R 67 mm,

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 2,917 h, load capacity: 1,600 kg, lifting height: 4,400 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,040 mm, gearing type: automatic, battery capacity: 625 Ah, battery voltage: 48 V, DGUV certified until: 09/2026, fork length: 1,200 mm, front tire type: superelastic tires (non-marking), rear tire type: superelastic tires (non-marking), Equipment: UVV, cabin, front guard, full service history, gripper hydraulics, head guard, lighting, pallet forks, We are offering this Jungheinrich EFG 216k SP G+E 440 DZ forklift, manufactured in 2019. EFG 216k SP G+E 440 DZ Lasdpezvcflefx Anxeg Equipment No.: FN597104 Year of Manufacture: 2019 03 Operating Hours: 2,917 h Maintenance: Annually (records available) Type: Electric 3-wheel forklift Year of Manufacture: 2019 Load Capacity: 1,600 kg Lifting Height: 4,400 mm Overall Height: 2,040 mm Fork Length: 1,200 mm Load Center: 500 mm Mast: Triple-stage - free lift Equipment: Side thrust, floor spot light, heater, 2x work lights at the front, non-marking tires, front, roof, and rear window, 2x steel doors, auxiliary hydraulics with 2 functions, Battery: 48 V / 625 Ah incl. Aquamatik Charger: suitable Warranty: none If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Laodpezxxifefx Anxog Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 10,982 h, load capacity: 2,000 kg, lifting height: 6,455 mm, free lift: 2,260 mm, fuel type: electric, mast type: triplex, construction height: 2,825 mm, battery capacity: 620 Ah, battery voltage: 48 V, fork length: 1,150 mm, tire condition: 20 %, front tire type: superelastic tires (black), front tire size: 200/50 - 10, rear tire type: superelastic tires (black), overall weight: 3,637 kg, total height: 2,825 mm, total length: 2,000 mm, total width: 1,450 mm, fuel: electricity, Equipment: sideshift, STILL FM-SE 20 – Reach trucks TECHNICAL DATA Lifting capacity: 2.000 kg Lifting height: 6.455 mm Closed height: 2.825 mm Free lift: 2.260 mm Mast: Triplex (3F645) Fork length: 1.150 mm Fork carriage: FEM 2B Drive: Elektro 48V Battery: 48 V 620Ah v. 2019 Tyres: Superelastik SE 200/50 - 10 (20%) Service weight: 3.637 kg Length: 2.000 mm Width: 1.450 mm Year of manufacture: 2010 Operating hours: 10.982 h Condition: working condition Laodpfx Ansz Aqbzoxeg EQUIPMENT 4th valve, Front work lights, Front windscreen, Pulse control ATTACHMENTS Sideshift Internal no.: 1309287 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 3,110 mm, travel distance Y-axis: 1,620 mm, number of axes: 4, number of slots in tool magazine: 11, spindle motor power: 10,000 W, spindle speed (max.): 24,000 rpm, This 4-axis SCM Morbidelli Author M100 CNC Wood Machining Centre was manufactured in 2018. It features a working area along the X-axis of 3110 mm and a maximum panel height of 180 mm. The machine is equipped with 21 vertical spindles and 10 horizontal spindles, providing versatile machining capabilities. If you are looking to get high-quality wood machining capabilities, consider the SCM Morbidelli Author M100 machine we have for sale. Contact us for further details. • Working area / axes: Lodpfxsz A Ahqe Anxeag • Panel length (Y): 1900 mm (2210 mm) • Panel height (Z): 180 mm • Panel length for through machining: 1400 mm • Vector speed X‑Y: Pro‑Space 56 m/min; Pro‑Speed 78 m/min • Worktable: 6–12 beams (TV Flex), 12 vacuum pods (145 × 145 × H75 mm); 2 stops per beam; movable beam length 1600 mm. • Drilling unit (general spec): • 21 vertical spindles, 8,000 rpm • 10 horizontal spindles, 8,000 rpm • Integrated saw Ø125 mm (X), 10,000 rpm • Motor power 2.2 kW • Electrospindle: 10 kW (S6), max 24,000 rpm. • Installation requirements: installed power 23–28.5 kVA; compressed air 450 NL/min; dust extraction 4500 m³/h, 25 m/s, outlet Ø250 mm. • Structure and motion: • Heavy, stress‑relieved, electro‑welded steel frame; all machining in single setup on CNC metalworking machines. • High‑speed four‑row linear guides; three‑circuit recirculating ball systems; X‑axis helical rack‑and‑pinion. • Brushless motors, inverters; machining units mounted on mobile gantry for rigidity. • Transparent polycarbonate safety enclosure. • CNC control and software: • PC‑Office: Windows 7, 17" color LCD, QWERTY keyboard, mobile control panel, Xilog Maestro. • Xilog Maestro features: parametric/graphical/ISO programming; DXF/ASCII import (2D); 3D linear/circular interpolation; spatial linear interpolation; helical interpolation; guided editor; automatic drilling optimization and tool libraries; panel origin offset; simulation; barcode management (software); self‑diagnostics; step‑by‑step manual intervention; graphical unit configuration; machining speed selection; SCM CNC Jerk function. • Safety: CE; PRO‑SPACE system with safety bumpers (automatic stop on potential collision). • Table equipment included/mentioned: rear aluminum reference stops H75 per beam; second central reference stops per beam; front reference stops H75 per beam. • Vacuum system: integrated vacuum pump 90/108 m³/h, 50 Hz. • F23 L drilling unit (listed configuration): • Independent Z‑axis • 13 independent vertical spindles (8 X / 5 Y) • 6 independent horizontal spindles (quick‑release), incl. 4 in Y • 32 mm pitch • Speed 4,500–8,000 rpm (inverter) • Rear‑panel groove/saw unit Ø125 mm, 5,500–10,000 rpm (inverter) • Motor 2.2 kW • Increased Z‑pressure • RO AX advantages: high productivity, precision, finish quality, processing speed; up to 90% reduction in maintenance (approx. 1,000‑hour interval). Additional equipment • TRB14 side‑mounted tool magazine (optional), right side: • Capacity up to 11 tools; max Ø350 mm • Center distance 130 mm • Max tool weight 8 kg; total 48 kg • 4 workpiece lifting supports H75, two lifting levels (above clamps and working level), 20 kg per support • Additional hardware key with USB port

Condition: like new (used), Year of construction: 2024, functionality: fully functional, For sale is a like-new Hundegger Speed-Cut SC480, including a fully automatic loading system, Pick & Feed 1000. Speed Cut SC480 Processing range: - Timber cross-sections from 20 × 40 mm to 240 × 480 mm - Timber lengths up to 13 m Equipment: - 5-axis sawing unit - Infeed and transfer cross conveyor for timber lengths up to 13 m - Hydraulic lifting table for timber lengths up to 13 m - Combination support for vertically operating tools - Drilling unit 3 kW, drilling direction vertical - Vertical finger milling cutter 6.5 kW - 4-axis revolving milling cutter 7.5 kW - Drilling unit 3 kW, drilling direction horizontal - Single-blade milling cutter - Marking device at the rear - Inkjet labeling system HP (from the rear) - Label printer at the control panel - Central lubrication - Additional screen at the control panel - Additional screen in the discharge area Laedpoz Da Htsfx Anxog - Floating dust extraction Pick & Feed 1000 Fully automatic loading system: - For timber lengths up to 13 m - 10 rack positions Special features: - System has been in operation since January 2025 - Extensive special equipment - Immediately ready for use - Ideal for timber construction, prefabricated construction, and joinery businesses Inspection: The machine can be inspected by appointment. We will gladly provide further technical information, photos, or videos. Location: Switzerland, Canton of Bern

Condition: good (used), Year of construction: 2014, functionality: fully functional, power: 22 kW (29.91 HP), planing width: 400 mm, rotational speed (min.): 2,940 rpm, overall weight: 1,800 kg, Equipment: CE marking, Calibrating Milling Machine / Planer for Parquet Manufacturer: Ledinek Model: Rotoles 400 D-S Year of manufacture: 2014 This machine comes from a parquet production facility. Working width: 400 mm Working height: 2 - 150 mm Minimum workpiece length: approx. 150 mm Thickness rotor power: 22 kW Motor speed: 2940 rpm Feed continuously variable: approx. 10 - 45 m/min., motor approx. 3 kW Number of reversible blades: 48 pcs Maximum chip removal: approx. 8 mm Lasdpfszyx E Aex Anxeg Total connected load: approx. 26 kW Electrical voltage: 3x 400 V, 50 Hz Compressed air: 6 bar Dimensions: approx. 2000 x 1300 x 2000 mm (LxWxH) Weight: approx. 1800 kg

Condition: used, mileage: 452,383 km, power: 353 kW (479.95 HP), first registration: 10/2016, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, brakes: intarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: air conditioning, electric window regulation, Tyre size: 315/80R22.5 Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Drive: Wheel Number of cylinders: 6 GVW: 19.000 kg Make of engine: MAN = Additional options and accessories = - PTO Lsdpfx Anjz D T E Nsxeag - Tipper hydraulics

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 14,655 h, load capacity: 1,600 kg, lifting height: 3,100 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,060 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,150 kg, total height: 2,060 mm, total length: 1,900 mm, total width: 1,070 mm, fuel: electricity, Equipment: sideshift, JUNGHEINRICH EFG 216k GE120-310ZZ – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 3.100 mm Closed height: 2.060 mm Free lift: 1.500 mm Mast: Duplex (2F310) Fork length: 1.200 mm Fork carriage: 2A Drive: Elektro Battery: 48 V 625 Ah (2018) Charger: 48 V - not tested Tyres: Superelastik 18 x 7 - 8 (80%) / 15 x 4,5 - 8 (40%) Service weight: 3.150 kg Length: 1.900 mm Width: 1.070 mm Year of manufacture: 2016 Operating hours: 14.655 h Condition: working condition EQUIPMENT 3rd valve, Front work lights, Pulse control ATTACHMENTS Sideshift Internal no.: 1308645 Lodpfoz Aql Tsx Anxjag Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 14,633 h, load capacity: 1,800 kg, lifting height: 4,700 mm, free lift: 1,450 mm, fuel type: electric, mast type: triplex, construction height: 2,180 mm, battery capacity: 775 Ah, battery voltage: 48 V, fork length: 1,600 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 200/50 - 10, rear tire type: superelastic tires (black), rear tire size: 16 x 6 - 8, overall weight: 3,710 kg, total height: 2,180 mm, total length: 2,140 mm, total width: 1,150 mm, fuel: electricity, Equipment: cabin, STILL RX 20-18 PH – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 1.800 kg Lifting height: 4.700 mm Closed height: 2.180 mm Free lift: 1.450 mm Ledpfoz Aqb Ujx Anxoag Mast: Triplex (3F470) Fork length: 1.600 mm Fork carriage: FEM 2A Drive: Elektro 48V Battery: 48 V 775 Ah v. 2016 Charger: ohne/without Tyres: Superelastik SE 200/50 - 10 (80%) / 16 x 6 - 8 (80%) Service weight: 3.710 kg Length: 2.140 mm Width: 1.150 mm Year of manufacture: 2016 Operating hours: 14.633 h Condition: working condition EQUIPMENT 3rd valve, Rear work lights, Front work lights, Heating, Full cabin, Pulse control Internal no.: 1309262 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: fully functional, Year of construction: 2018, screw conveyor diameter: 52 mm, Krauss Maffei Berstoff ZE 52-48D Twin Screw Extruder (2018) comprising Krauss Maffei Berstoff ZE 52-48D Twin Screw Extruder with 2x 52.2 mm diameter screws Lasdpfx Anoz Atiusxeg 48:1 L/D ratio, co-rotating 12-barrel housing section, electrically heated and water-cooled Side feeder 1200rpm max.imum screw speed 350kW motor with Eisenbeiss ZE-042.5-16.0 gearbox

Condition: good (used), operating hours: 5,579 h, Crown SC 5360 1.8 Electric Forklift The SC Series forklifts offer the power, maneuverability, and reliability needed to meet the demands of both the job and the operator. The SC Series stands out due to its optimal balance of meticulous attention to detail, advanced technology, a solid foundation, and ergonomic design. Whether used indoors or outdoors, the SC Series forklifts provide a work environment that makes the operator's life easier. The D4 armrest can be easily adjusted vertically and horizontally with one hand. The SC forklifts offer excellent all-around visibility. Robust double-T profile masts withstand longitudinal, lateral, and torsional bending forces. Integrated sideshift with fork carriage protects the cylinders and helps prevent hydraulic oil leakage. Electric motors designed and manufactured by Crown offer the highest thermal protection ratings in the industry. Symmetrical box frame design to reduce frame distortion from collisions. Robust steering axles with heavy-duty tapered roller bearings withstand impacts from uneven floors and loading ramps. Easy maintenance Crown Access 123 technology provides reliable, real-time on-board diagnostics and control of all forklift systems. This significantly simplifies maintenance and also builds operator confidence. The e-GEN braking system replaces the conventional friction brake, resulting in performance, service, and cost benefits. It enables controlled use of the regenerative engine brake depending on operating conditions, reducing pedal effort and long-term maintenance requirements. The battery is accessible from above for quick and easy maintenance. Technical Specifications Manufacturer: Crown Model: SC 5360 1.8 Electric 3-Wheel Forklift Weight: 2.88 t Standard Tires: 2x/2 Model Series: SC 5300 Overall Width: 1123 mm Turning Radius: 1.694 m Fork Length: 1600 mm iForks Weighing Forks Drive System: Diesel Nominal Load Limit at Load Center: 1.8 t Laedpfx Ansya Da Hexeg Center of Gravity: 500 mm Lift Height: 3.5 m Voltage: 48 V Travel Motor(s): 9.6 kW Lift Motor(s): 7.9 kW Travel Speed ​​with/without Load: 16 km/h Lifting Speed ​​with/without Load: 0.56/0.37 m/s Lowering Speed ​​with Load: 0.56 m/s Overall Height: 2260 mm Battery Weight: 0.962 g New steering pump motor (2025) Operating hours: 5579 iForks weighing forks for forklifts, new price €4300 Financing through our bank is also possible. komplett-konzept.leasingo.de More items – new and used – can be found in our shop! Shipping costs abroad on request!

Year of construction: 1982, condition: used, Manesty – ACCELA COTA Coating machine Model 150 (45 inch) This high quality coating equipment, designed to cover a wide range of production batches from medium scale to large scale, has an unbeatable combination of a very efficient coating process coupled with a high rate of return on investment. Innovative science based developments in the four key areas of; tablet mixing, spraying, drying efficiency and control system technology, guarantee that the XLTMCota provides a very effective solution to obtaining a highly controlled process, ensuring the delivery of high quality end product. Interchangeable baffles to suit all processes A range of three baffles to suit different applications are offered. Oystar Manesty identified the product movement in the coating pan to be a key attribute in reaching optimal coating efficiency. Baffles can be easily removed and interchanged. Efficient CIP system to guarantee fast return to production In conjunction with our m-tecTM control system, Oystar Manesty provides a fully validatable Clean in Place (CIP) option. From the initial rinse through to compressed air cleaning of solution tubes, the XLTMCota Clean in Place (CIP) was designed to promote fast return to production by eliminating the need for manual cleaning. Simple and fast loading and unloading facility Tablets can be loaded with the front door closed or open using simple load chutes designed to suit different types of containers. Tablets are discharged by reversing the direction of the drum. This method has been proven to be extremely fast and gentle at the same for safe handling of the finished product. TECHNICAL INFORMATION Weight : 1590 kg Coater Dimensions : H 2065 x W 1665 x D1475 Spray Guns : 3 Working Volume : 170 L Lasdpfx Anjzg I T Aexsg Compressed Air Consumption (5bar from Coater) : 7.9 Air Volume Range (m3/hr) : 1500 – 2500 Main Heater Temperature Range (°C) : 10 – 85 Main Heater Steam Consumption ( kg/hr ) : 117 Sold with : Donaldson Torit – Dust collector DCE DF02 12R

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the Ledpevuhumefx Anxsag reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 11,558 h, load capacity: 1,600 kg, lifting height: 3,960 mm, free lift: 1,820 mm, fuel type: electric, mast type: duplex, construction height: 2,460 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 18x7-8, rear tire type: superelastic tires (black), rear tire size: 16x6-8, overall weight: 3,200 kg, total height: 2,460 mm, total length: 2,100 mm, total width: 1,100 mm, fuel: electricity, Equipment: sideshift, STILL RX 20-16 P – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 3.960 mm Closed height: 2.460 mm Free lift: 1.820 mm Mast: Duplex (2F396) Fork length: 1.200 mm Fork carriage: FEM 2B Drive: Elektro Lajdpsz Apqnjfx Anxsg Battery: 48 V/625 Ah (2016) Charger: ohne/without Tyres: Superelastik 18x7-8 (40 %) / 16x6-8 (50 %) Service weight: 3.200 kg Length: 2.100 mm Width: 1.100 mm Year of manufacture: 2006 Operating hours: 11.558 h Condition: working condition EQUIPMENT 3rd valve, Front work lights, Half cabin ATTACHMENTS Sideshift Internal no.: 1308826 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.