Used Zmm Cu 325 for sale (2,870)

Condition: like new (used), functionality: fully functional, power: 122 kW (165.87 HP), Year of construction: 2018, operating hours: 3,800 h, Equipment: air conditioning, * 3,800 hours * Mono boom * Blade support * Air conditioning * Camera system * Fully hydraulic quick coupler Oilquick OQ70/55 * Central lubrication system Gkjdpfx Ajzdn Syjn Ijb * Engine power 122 kW * Operating weight 25,000 kg * 1 x deep dig bucket * As-new condition

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: J22143, total length: 5,200 mm, total height: 2,391 mm, type of input current: AC, outer diameter of label roll: 400 mm, inside diameter of label roll: 75 mm, overall weight: 800 kg, input voltage: 380 V, Performance specifications: Gsdpfxezv S Rws An Iekb Product: Minimum height 40mm Maximum height 330mm Maximum diameter 150mm Minimum diameter 15mm Labels: Maximum outer roll diameter 400mm Inner roll diameter 75mm Maximum label width 150mm Application speed min 70 ppm Conveyor speed max (infinitely adjustable) 27.5 m/min min 7.5 m/min Dimensions Overall height 2391mm Length 5200mm Power supply Electrical 380V AC (three-phase) 50/60Hz, 4kVA Pneumatic 0.06 m3/min Protection class IP20 Parameter control via Allen Bradley PanelView Plus 700 Condition: Functional, professionally dismantled Note! System is sold without the Cognex camera system Further information available upon request

Condition: used, Year of construction: 2021, operating hours: 2,230 h, CAT 325, year of manufacture 2021, with only 2,230 operating hours. In top condition. Operating weight approx. 28,500 kg Engine: Cat C4.4 turbocharged diesel, engine output 128.5 kW (172 hp) Displacement: 4.4 liters Emissions standard: EU Stage V Gkodpfx Aezg S Absn Iob Fuel tank capacity: approx. 313 liters Hydraulic system capacity: approx. 230 liters Max. digging depth: 6.70 m Air conditioning CE marking

Condition: ready for operation (used), Heidenhain UM 112 inverter, ID: 325 001-02, serial number: 10775502A – complete with test report, professionally overhauled and tested, with a 3-month warranty, 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective unit must not have any mechanical damage, such as breakage, as these cannot be repaired. In such cases, an additional charge of €1000 (including VAT) will be applied. Gsdpfx Aezv Hrcsn Iekb Attention: You are bidding on a Heidenhain UM 112 inverter, ID 325 001-02, serial number 10775502A, as part of an exchange service. It has been professionally completely overhauled and tested and comes with a 3-month warranty. It is 100% functional. The scope of delivery is as shown in the photos. In both the repair and exchange procedures, your defective unit must not exhibit any mechanical damage, such as breakage, as these are no longer repairable. In this case, a subsequent invoice of €1000 (including VAT) will be issued.

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 152290, SPECTRO SPECTROMAXX optical emission spectrometer (OES), floor model (2020). Gedpfezxgtxex An Iekb Serial number: 152290 Wavelength range: 140-670 nm Dimensions (floor model): approx. 790 x 625 x 1350 mm (L x W x H) Condition: - Used in a professional QC laboratory - Fully operational - Annually maintained and calibrated - Last calibration: October 2025 Included: - PC with licensed software (Spark Analyzer Pro MAX) - Analytical programs (Fe, Al, Ti, Cu, Ni) - Accessories (wire adapters, spark stand, ceramic discs, etc.) - Ready for immediate use Delivery: costs to be determined (EXW) Reason for sale: Optimization of laboratory capacity

Condition: as good as new (ex-display), 4-SIDE EDGE BANDING LINE + DRILLING Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Composed of the following machines: 202005a) 1st Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFL 325/ M1 / C Gkjdpfx Aozrd Dhjn Iob 202005b) Turning Station "HOMAG" Mod. TDL (from lengthwise to crosswise) 202005c) 2nd Double-side Sizing & Edge Banding "HOMAG" Mod. KFL 326/ M2 / C 202005d) Connecting Roller Conveyor 202005e) Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 503

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 2132 5x, functionality: fully functional, operating hours: 150 h, number of slots in tool magazine: 12, total length: 3,200 mm, total width: 2,070 mm, overall weight: 10,000 kg, For sale: AES Ultra Raptor 2132 – 5-axis CNC machining center We are selling an AES Ultra Raptor 2132 CNC machining center, a top-of-the-line machine for processing wood, MDF, particleboard, compact panels, and other panel materials. Features: ✔ 5-axis machining ✔ Working area: 3000 x 2100 mm ✔ Automatic tool changer ✔ Nesting table with vacuum clamping ✔ High precision and productivity Gjdpfxezzzbcs An Iekb ✔ Suitable for the production of furniture, stairs, doors, kitchens, and other custom-made products The machine is in excellent condition and ready for operation. Price: €75,000 + VAT For more information, photos, or to arrange a machine inspection, please contact us.

Condition: new, neu Bulgarien 58370 € 1103.19 € 600 mm 2000 mm 0 mm 80 mm 400 mm 400 mm 8 90 MK 3 20 - 100; 80 - 400; 400 - U/Min 120 64 0.5 - 120 mm 60 - 1/4 Gänge/" 315 mm 1 mm 90 mm 5 MK 2 mm 11 kW 3600 mm 1500 mm 1650 mm 3110 kg In contrast to the universal lathes, here the adjustment of the revolutions is infinitely variable by means of a frequency inverter. It is possible to ensure a "constant cutting speed" (V-const), i.e. when changing the diameter to be machined, the speed remains unchanged and thus a higher accuracy and smoothness of the surface is achieved. At the customer's request, the machines can be manufactured with a reading of the linear displacement and positioning by mounting a digital display. driven by variable speed control (3 steps) 3-axes digital readout Fagor with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) Gsdpfoyq Stpjx An Iekb 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm spindle dead center main motor with frequency invertor four way rapid traverse device longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.000 mm € 54970,00 turning length1.500 mm € 56350,00 turning length3.000 mm € 62720,00 turning length4.000 mm € 685,00 turning length5.000 mm € 83910,00

Condition: new, turning diameter 760 mm turning length 3000 mm swing diameter over bed slide 520 mm centre height 380 mm reus 17 (7,5 - 1015) U/min tail stock MK6 quill stroke 225 mm diameter of quill 105 mm spindle bore 132 mm feed längs 0,039 - mm/min feed quer 0,02 - 9 mm/min total power requirement 15 kW weight of the machine ca. 4700 kg dimensions of the machine ca. 4900 x 1650 x 1650 mm - Coolant device - Machine light - Chip back wall Gkjdpfx Aneqv Iw Te Isb - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE

Condition: good (used), functionality: fully functional, 1 x multi-spindle automatic lathe Traub TD 26 with boring unit + tool magazine Iemca AS 325/32 CT Year of manufacture: 1992 + chip conveyor Gsdpfx Ansz Agyae Iskb The machine can be inspected while powered on.

Condition: new, Year of construction: 2019, functionality: fully functional, volume flow: 324 m³/h, total height: 1,285 mm, overall weight: 165 kg, ALUP AD325 adsorption dryer 2019 NEW never used. for sale brand new dryer old stock (2019) includes two brand new filters. capacity : 324 M3/H height : 1285 mm width : 620 mm depth : 571 mm weight: 165 kg connection: 1" 1/2 Godpfxju Rpg To An Iokb tested and ready for use.

Condition: new, neu Bulgarien 42910 € 819.58 € 400 mm 750 mm 200 mm 52 mm 235 mm 320 mm 6 Gkjdpfxsyq Stio An Iob 6 MK 4 18-98; 48-265; 144-790; 3 U/Min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 235 mm 110 mm 50 mm 4 MK 100 mm 7.5 kW 1530 kg driven by variable speed control (4 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.000 mm € 43.630,-

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2278358, type of input current: AC, total height: 2,500 mm, total width: 3,000 mm, total length: 1,200 mm, overall weight: 900 kg, For sale is a SCHUNK Sonosystems LS-C 9 kW ultrasonic welding system in very good condition. The system was used exclusively for development and laboratory purposes and was not used in series production. Accordingly, the machine is in very good technical and optical condition and is almost like new. The LS-C is a universal ultrasonic welding system for joining copper and aluminum conductors with contact parts, busbars, and flat contacts. Due to its flexible system concept, it is particularly suitable for development departments, technical labs, prototype manufacturing, and small series applications. Technical data Manufacturer: SCHUNK Sonosystems GmbH Gksdpfxezzaxae An Ijb Model: LS-C laboratory system Ultrasonic generator: 9 kW Frequency: 20 kHz Voltage supply: 3 × 400 V, 50/60 Hz Compressed air requirement: 6.5 bar Welding range: flexible Al conductors approx. 25–160 mm² and Cu conductors approx. 25–120 mm² (application-dependent) Equipment Dynamic process control Monitoring of welding height, energy, and welding time PC-based user interface with Windows system Memory for over 10,000 applications and process data sets Network capability and data export Soundproof enclosure Force sensor Universal anvil Welding pressure cylinder combination Ø 80 mm and Ø 125 mm Complete vibration system for 95 mm² Cu conductors Cable clamps and stranded wire end stop CE-compliant design Also included in the scope of delivery Tool set for 50 mm² conductors Tool set for 70 mm² conductors Condition The machine was used exclusively in development and laboratory operations and was not subjected to continuous production loads. Accordingly, the operating hours are low and the system is in very good condition. Application areas Development and prototype construction E-mobility and battery technology Cable assembly Laboratory and technical lab use Pre-series and small series production Inspection and functional demonstration possible by arrangement. Technical documentation and further images are available upon request.

Condition: new, neu Bulgarien 96240 € .94 € 860 mm 3000 mm 430 mm Gkedpfx Aeyq Sm Ajn Ieb 135 mm 620 mm 560 mm 11 140 MK 7 - 42; 28 - 170; 165 - 1 U/Min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 240 435 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4650 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length1.500 mm € 82140,00 turning length2.000 mm € 85080,00 turning length4.000 mm € 102660,00 turning length5.000 mm € 115430,00 turning length6.000 mm € 129500,00

Condition: new, neu Bulgarien 89440 € 1690.42 € 760 mm 3000 mm 380 mm 132 mm 520 mm 560 mm 11 140 MK 3 7 - 42; 28 - 170; 165 - 1 U/Min 150 0.039 - mm/U 0.02 - 9 mm/U 0.5 - 0 mm 60 - 1/6 Gänge/" 410 mm 150 mm 105 mm 6 MK 225 mm 15 kW 4470 kg driven by variable speed control (3 steps) 3-axes digital readout FAGOR with CSS (constant surface speed) quick change toolpostAmestra type Multifix with 4 holders (3 square, 1 round) 3-jaw chuck Bison3295/DIN6350, Ø 400 mm spindle dead center main motor with frequency invertor four way rapid traverse device foot pedal brake longitudinal stop for 1 position coolant equipment Gsdpfx Ajyq Sn Ton Iskb full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock tailstock quill reducer mechanized movement of tailstock low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTHS: turning length 1.500 mm € 75340,00 turning length2.000 mm € 78380,00 turning length4.000 mm € 95860,00 turning length5.000 mm € 108730,00 turning length6.000 mm € 122800,00

Condition: good (used), Year of construction: 2014, Traverses XYZ; 1020 x 830 x 245 mm, Gsdezcwk Rjpfx An Ijkb Table size 1000 x 700mm., spindle taper HSK-E25, 5 station ATC, , Datron software

Condition: used, Holzher arcus 1334 edge banding machine pre-milling cutters glue application, cartridge glue Gksdjz Ai Utopfx An Ieb pneumatic pre-trimming guillotine pressure rollers trimming cutters up-and-down milling cutters R1 R2, CNC-controlled corner rounding profile trimming flat trimming Maximum edge banding height: 60 mm Edge band thickness in roll: 3 mm Feed speed: 8-18 m/min

Condition: like new (used), Year of construction: 2019, Ref: 11072 . 2019 Horizon RD-4055 Dual Cylinder Rotary Die Cut System Like new, ex demo condition - ONLY 5,000 on the counter! Efficient production with new separator and card stacker for labour saving operation. Features: • Die cutting, waste separation and stacking in one pass for efficient production. • A wide range of applications can be processed such as business cards, greeting cards, labels and light packages. • Maximum 6,000 sheets can be processed. • 21-up round corner business card production can processed at 126,000 cards per hour. • Simple and easy operation without relying on a skilled operator. • Uniquely designed servo motor controlled ‘Repeat-cut’ feature allows multiple-up cuts from a single up die to minimize die cost. • Ruggedly constructed yet compact compared to normal die cutters. • Various delivery options are available to process a wide range of applications. • Die-cutting and Kiss cutting can be performed simultaneously by using a die which has two different blade heights, ideal for making stickers and labels. • Creasing can be achieved to avoid image cracking. Suitable for boxes, pocket folders and greeting cards which require additional folding processes after die cutting. • Repeat-cut enables the running of multiple up imposed applications with a smaller die to reduce die cost (Up to 8 repeats) Equipped with: TOUCH PANEL: Both setup and control can be done through the intuitive touch screen. After mounting the upper and lower die, the system can be set up by simply inputting sheet size and product size. The graphical illustrations on the screen are simple and easy to understand. FEED SECTION: Vacuum belt feeding enables superior feeding with easy setup and operation. An ultrasonic sensor is used for double feed detection on a wide range of substrates. The optional code reader BR-N4055 enables job separation for easy handling. TRANSPORT SECTION: Sheets are registered by vacuum belt and position is firmly secured with gripper rollers for accurate and consistent register. Servo motor driven gripper rollers ensure the die cut position without effecting processing speed. The optional alignment detection sensor ADS-N4055 detects the alignment error for additional quality control. DIE CUTTING SECTION: Rigid magnetic upper roller and solid lower anvil cylinder ensure high quality die cutting. Uniquely designed die cutting section enables easy and quick die setting. Specification: Sheet Size (Before processing): Max. W400 x L550 mm or W15.740" x L21.650" Min. W200 x L275 mm or W7.875” x L10.830” Processed Material: Normal paper, Coated paper, Cardboard Material Thickness: 127.9 to 400 gsm Gkodjymmqzepfx An Iob Die Cutting: Max. 0.5 mm or 0.019” (In case of blade height: 0.8 mm or 0.031”) Max. 0.3 mm or 0.011” (In case of blade height: 0.6 mm or 0.023”) Creasing: Max. 0.4 mm or 0.015” (In case of blade height: 0.8 mm or 0.031”)

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Gksdpfx Anozb Il Nj Iob Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Condition: used, Year of construction: 1999, total height: 1,800 mm, total length: 5,700 mm, total width: 2,300 mm, Colour: White Weight: 2.000 kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 10.7488 - Main motor power [kW]: 6.3 - Max. saw length [mm]: 5200 - Max. saw width [mm]: 360 - Max. saw blade diameter [mm]: 600 - Input table length [mm]: 5200 - Output table length [mm]: 3300 - Options: Automatic pusher system - Transport dimensions: 5700mm x 2300mm x 1800mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gkedpfszmxvzex An Ijb Yorick Diebels

Condition: used, functionality: fully functional, machine/vehicle number: 91138631, Year of construction: 2019, operating hours: 11,602 h, load capacity: 2,500 kg, lifting height: 6,950 mm, free lift: 2,450 mm, mast type: triplex, construction height: 2,950 mm, fork length: 1,150 mm, drive type: Lithium-Ionen, Reach truck Chassis number: 91138631 Load centre: 600 Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Front tyre type: Polyurethane Rear tyre type: Polyurethane Battery type: Lithium-ion Description: Newly serviced and UVV inspected Gkjdpfx Aeztt S Don Ieb Sideshifter, fork positioner, Scale, safety light, Fork camera, lift height indicator

Condition: used, functionality: fully functional, machine/vehicle number: 91138630, Year of construction: 2019, operating hours: 12,607 h, load capacity: 2,500 kg, lifting height: 6,950 mm, free lift: 2,400 mm, mast type: triplex, construction height: 2,950 mm, fork length: 1,200 mm, drive type: Lithium-Ionen, Reach truck Chassis number: 91138630 Load center: 600 Mast type: Triplex Godpsztt S Rsfx An Ijkb Condition: Ready for use and fully functional Technical condition: good Front tire type: Polyurethane Rear tire type: Polyurethane Battery type: Lithium-ion Description: Maintenance performed + safety inspection completed Side shifter, fork positioner, Weighing scale, safety light, Fork camera, lift height indicator

Condition: excellent (used), Double side - First (1st) machine in a line Machine Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Working width (min/max) mm 195 / 1500 Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 32 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Gkodpfxozrd Nqe An Ieb Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Rough Trimming unit BF10 (2 x Kw 0,55) Fine Trimming unit PF20 (2 x Kw 0,4) FRRE SPACE Milling grooving unit UF 11 (1 x Kw ?) Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)

Condition: new, neu ca. 4 Monate ab Auftragse Bulgarien 37910 € 724.08 € 400 mm 1000 mm 200 mm 52 mm 235 mm 320 mm 6 6 MK 12 50-2.240 1/min 80 0.015 - 0.6 mm/U 0.0075 - 0.3 mm/U 40 0.25 - 7.5 mm 120 - 4 Gänge/" 0.0625 - 1.875 480 - 16 235 mm 110 mm 50 mm 4 MK 100 mm 4 kW 2750 mm 1100 mm 1600 mm 1540 kg driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostMultisuissewith4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 200 mm spindle noseNr. 6 DIN 55027 four way rapid traverse device spindle dead center coolant equipment 1 pce. flange plate for lathe chuckØ 200 mm 1 adapter sleeve full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock Godpfxexzuu Aj An Ijkb low voltage machine lamp operating manual machine according to "CE" FURTHER TURNING LENGTH (PRICE ON REQUEST): turning length 750 mm

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS Gkodpfx Anjv Tp D Hs Ieb - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition