Used Zopf Section Bender for sale (3,060)

Condition: new, Year of construction: 2024, Bending machine ZB 80/3 H eco - with foot pedal - with standard roller set - three driven shafts smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm Nodpfx Amsgh T Hrs Tewi - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,5 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. - adjusting way: 120 mm - weight: 470 kg - dimensions: 900x600x1100 mm

Condition: new, Year of construction: 2025, Bending machine ZB 70/2 M - with foot pedal - with standard roller set - two driven shafts - mecanical adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide -support are exchangeable - shaft diameter: 40 mm - roller diameter: Nwjdpet Hwfnofx Am Tji - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - adjusting way: 120 mm - weight: 400 kg - dimensions: 900x600x1100 mm

Condition: new, Year of construction: 2023, Horizontal bending machine AH 20 with backgauge - ZOPF - with semi-automatic control - hydraulic pressure 20 to. - length of stroke - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 2,2 KW Njdjwyt Tqjpfx Am Tjwi - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - bending capacity: flat material max. 150x12 mm round tube up to 48 mm

Condition: new, Year of construction: 2025, Pipe Bending Machine Zopf Model KB 100: Capacity: - Maximum pipe diameter: 100x5 mm (St. 37) - Square profiles: 80x80x3 mm - Solid material: 45 mm - Maximum tool diameter: 900 mm - Bending angle up to 210 degrees - Bending speed: 0 - 2.2 RPM - Motor: 11 kW, 400 Volt, 50 Hz, 3-phase - Weight: 1850 kg - Dimensions: 140x80x160 cm Features: - Digital display - Programmable bending angle - With foot pedal - Equipped with inverter - Powerful motor and reduction gearbox for high torque - Control unit for setting the bending angle Nwjdpex I Afxefx Am Tei - Counter for positioning the counter bearing - Mobile control panel - Quick tool change - All shafts hardened and ground - Manual material clamping - Worktable made of CK 45 steel

Condition: new, Year of construction: 2026, Ring Rolling machine Zopf profile bending machine model ZB 100/3 H - three driven shafts - hydraulic adjustment of center roller - digital readout with memory - working position horizontal and vertical Nwedpfx Ajd Eyz Uom Toi - shafts are supported by conical bearings - slide bars - shaft diameter 60 mm - roller diameter 215 mm - main motor 1,5 kw - hydraulic mtor 1 kw - hydraulic pressure 18 ton - bending capacity flat material up to 80x15 mm on edge - round tube up to 100x2,0 mm - angle iron leg in and out side 70x70x8 mm - weight 800 kg

Condition: new, Year of construction: 2026, Horizontal bending machine T 1000 Multi - ZOPF - with semi-automatic control Nedpfxsg Anurs Am Tjwi - hydraulic pressure 100 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 10 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 2300 kg - colour RAL5012 / RAL7015 - bending capacity: flat material max. 300x32 mm (V200) round tube 3/8" - 3"

Condition: as good as new (ex-display), Year of construction: 2025, Horizontal Bending press Zopf - model T 100 Nwjdpfxodibygo Am Tei - year of construction 2025 - demo model - length of stroke 200 mm - weight 320 kg Bending capacity flat material mild steel 150x10 (with special tooling) with punch radius 5 mm and die V = 63 mm inclusive mecanical stop Digital Readout with programming of the stroke demo model

Condition: new, Year of construction: 2025, Bending machine ZOPF ZB 140/3 H 2 - compl. with standard roller set, - digital readout for left and right axis Nsdpfx Amsd A Nb Hs Tswi - hydraulic side guides - three smooth driven rollers - planetary movement of bending rolls - working with both vertical and horizontal shafts - built according to the CE rules - bending capacity steel up to 110x25 mm -shaft diameter 110 mm -Rolls diameter 350 mm -working speed 5 m/min -installed power 7,5 kw -weight 2950 kg -module max Wcm3 157 -400 Volt 50 Hz. 3 ph.

Condition: used, Geka Hydracrop HYD-50, 50/N Hydraulic Steelworker (includes punches and Dies) Nwodpfx Amszpan Rs Tei 50 Tonne Pressure. Max Punch Ø28mm through Max 13mm Thickness. Plate Shear Approx 200mm x 20mm. Round Bar/Square Bar 40mm. Foot Control. S/No. 6334. Includes Quantity of Punches & Accessories. 415 Volt Power Supply, 3 Phase.

Condition: new, Taylor 6/2.5m Clamp Carrier System For Solid Wood Edge / Face Laminating. A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating, the Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a pneumatic clamp tightener / loosener, pneumatic component flattener and air motor drive for rotation. On request the machine can be specified with a working width of 3.1m and also with 12 working sections. 2.5m (8.5ft wide) 6 section frame. 36 x 302 type clamp arms with 90mm (3.5") high jaws and 1015mm (40") max. opening. (6 clamps per section). 1 x 80U type swing style pneumatic clamp tightener and component flattener with push button operation. 1 x 80AA pneumatic motor drive rotation. Front rest - manually operated. Nwsdpfxody Dtre Am Tsi Pneumatic joy stick control for rotation / forward reverse. CE safety perimeter guards to sides / rear

Condition: good (used), Year of construction: 2006, A versatile 6 section clamping machine specifically designed for solid wood edge and face laminating. The Clamp Carrier is ideal for producing a variety of components such as panels, table tops, block gluings, joinery sections and stair parts. The patented 'equaliser' clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. As standard the machine is equipped with a hydraulic clamp tightener / loosener, pneumatic component flattener and hydraulic rotation. Equipped with: 302 type clamp arms with 915mm (36") max opening and 95mm ( 3.5") high jaws - 2 x 80S heavy duty hydraulic drives for rotation Nedporu Evgsfx Am Tswi - 1 x 80V semi automatic hydraulic clamp tightener. (Hydraulic pack 3 phase electrics). - 1 x 80D pneumatic component flattener - Pneumatic movement in / out of front rest - CE safety perimeter guards Year - 2006 CE

Condition: good (used), Year of construction: 2012, Approx. 36 bays of Hofe shelving systems, shelving units 1.30m wide, 0.60m deep, frame height 3m - used -: Price ex-works: €3,500 (net), disassembled, packaged, and loaded. Manufacturer: Hofe Type: Orion Plus Njdezpf Euopfx Am Tewi Year of manufacture: 2012 / 2013 Approx. 6 shelves per bay Dimensions per shelf: approx. 1.30m x 60cm Frame height approx.: 2.50m Load capacity per shelf: 190kg Bay load: 1,700kg Condition: good Available: from approx. August 2026, or by arrangement Location: Erfurt area

Condition: good (used), Year of construction: 2012, Approx. 15 sections of Hofe shelving units, shelving bays 1.30m wide, 0.80m deep, frame height 2m - used: Price ex-yard: €1,335.00 (net), disassembled, packed, and loaded. Manufacturer: Hofe Type: Orion Plus Year of manufacture: 2012 / 2013 Approx. 5 shelves per section Dimensions per shelf: approx. 1.30m x 80cm Frame height approx.: 2m Load capacity per shelf: 190kg Section load capacity: 1,000kg (some nameplates state 200kg, which is due to the load capacity of the platform where the shelving units are placed; the shelving units can hold 1,000kg). Condition: good Available: from approx. August 2026, or upon agreement Location: Erfurt area Nsdpfx Amozpf Ehj Tswi Photos show a shelving unit 60cm deep!

Condition: good (used), Year of construction: 2011, Approx. 84 bays of industrial shelving, Meta, shelves 1.25m wide, 0.60m deep, frame height 2.50m - used: Price ex works: €6,500 (net), disassembled, packed and loaded. Manufacturer: Meta Nsdpfxozpf D Do Am Tjwi Type: Slot-in system Year of manufacture: 2011 Approx. 4 shelves per bay Dimensions per shelf: approx. 1,250mm x 600mm Frame height approx.: 2.50m Load capacity per shelf: 230kg Bay load capacity: 1,030kg Condition: good Available: from approx. August 2026, or by arrangement Location: Erfurt area Note: The photo shows more shelves per bay than are actually available!

Condition: good (used), Year of construction: 2000, control type: NC control, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), Equipment: cone bending device, 4 roll plate bender Davi Promau - MCB-3037 MACH-ID 9751 Make: Davi Promau Type: MCB-3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication CE-Declaration Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Nedpfx Aezi Ra Rom Tjwi Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), punching pressure 60.0 t punching cross-cut in cmm 31 in 15 mm square edge steel 40.0 mm L-beam 160 x 80 mm flat steel 400 x 16 mm throat 400 mm round bar steel 40.0 mm total power requirement 5.5 kW weight of the machine ca. 1.950 kg dimensions of the machine ca. 1700 x 1050 x 1980 mm good / well-maintained condition (!!) Features: - Stop / support table at the punching station - Support table at the notching station - Flat steel blade, 375 mm long, with four cutting edges, - also for cutting angle iron at 45° - Material support table with stop bar on the flat steel shears - Section steel blade for cutting 90° angle steel as well as round and square steel - Scraper, swiveling - Square notching device with stop table - 2 foot switches and electrical controls Nsdpfxezkbnno Am Tewi - Connector for external engagement - Integrated hydraulic power unit - Three-phase motor, 400 volts, 50 Hz - Various insert tools such as punches and dies

Condition: new, functionality: fully functional, Year of construction: 2025, Manual Pipe Bender HRB-3D 850 for bending pipes and solid material up to a maximum of 12 mm Precise positioning and repeatable bending are ensured by three battery-operated digital displays that precisely show the bending angle, pipe feed, and pipe twist. - 80 mm three-jaw chuck - Feed stop system - Feed length approx. 850 mm The manual pipe bender should be permanently mounted on a table or frame (not included). Nwodpfx Asttagdem Toi We would be happy to provide you with a detailed quote if you send us your complete company address, email address, and contact details.

Year of construction: 2017, condition: used, Engine unit / engine computer / engine control unit Nwjdpfx Aszl Tmlom Tji BOSCH 51.25820-10 Coming from: MAN TGS 26.420 Euro 6 Year of manufacture: 2017 Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: used, Technical details: throat: 510 mm number of strokes: 34 Hub/min height of stroke: 100 mm sheet thickness - max.: 16 mm round bar steel: Ø 60 (scheren) mm square edge steel: 60 (scheren) mm angle steel: 90°: 200x200x18 und 45°: 100x100x13 (scheren) mm flat steel: 750x20 und 400x30 (scheren) mm knife length: 765 mm total power requirement: 15 kW weight of the machine ca.: 5,1 t dimension machine approx.LxWxH: 2,4 x 1,2 x 2,0 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Punching: -Hold-down device -throat 510mm -Punching force 150t -Hole size max. Ø 40x28mm -Ø max. 165mm -max. punch holder Ø 31mm, currently installed punch Ø 25mm Notching: -max. sheet thickness 16mm Nedpsxcay Hefx Am Towi -max. angle steel 120mm -Cutting depth x width: 110 x 58mm -Pipe notching device Ø 60mm Accessories: various dies and various punches and small punches (see photo) *

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Universal profile steel shear with punching unit Peddinghaus Model 210 / 16 Year of manufacture: 1977 Pressing force: 60 t Punching: 27 x 19 mm Round steel: 50 mm Nwedpfsznh A Hjx Am Toi Square: 45 x 45 mm Flat steel: 150 x 19 mm Punching: 27 x 19 mm L profile 90 degrees: 130 x 13 mm L profile 45 degrees: 100 x 11 mm T profile 90 degrees: 130 x 15 mm T profile 45 degrees: 100 x 11 mm Drive: 5.5 kW Weight: 3 t Many punching tools included Price: €1,500 plus VAT, ex site

Condition: used, functionality: fully functional, Year of construction: 2016, Flat shear blades, 520 mm long, with four cutting edges, also for shearing angle iron 45° material support table with gauge stops on the flat shear station section shear knife for shearing angle iron 90° as well as rounds and squares quick-change punching attachment up to 39 mm Ø, for punches and dies of the blue series or with universal die block for die no. 3 height-adjustable and swing-away stripper with exchangeable plate square notching attachment material support table on the notcher station two two-stage foot pedals and electric control elements on the punch station and notcher station Nwedpjy Ndt Hjfx Am Toi hydraulic low pressure spotter for foot operation connecting sockets for external engagement, e. g. via electrical length stop integrated hydraulic power-pack

Condition: like new (used), functionality: fully functional, Year of construction: 2025, TECHNICAL SPECIFICATIONS • Punching force: 850KN / 85 tons • Punching: Ø40x15mm • Cuts per minute (stroke 20mm): 40 • Throat depth: 500mm • Stroke: 70mm • Cutting of L-shaped profiles at 90º: 120x120x10mm Nwedszg Dxbopfx Am Tji • Flat bars: 450x15mm • Round bars: Ø45mm • Square bars: 40mm • Triangular notching: 130x130x12mm • Bending: 200x12mm • Motor: 9KW • Net weight: 2500Kg

Condition: used, Year of construction: 2014, Robust, power-operated industrial sectional door with an integrated pedestrian door and transparent sections. Ideal for production halls, warehouses, and logistics buildings. Manufacturer: Promotec Industrietore Model series: Prismatherm Type: 62 Njdpfx Aezl Ediom Towi Dimensions: 5 x 5 m Door type: Power-operated industrial sectional door Design: With integrated pedestrian door Glazing: Several transparent sections Year of manufacture: 2014 Product standard: EN 13241-1

Condition: used, High-quality, insulated industrial or garage sectional door from HÖRMANN. The door is in good used condition and is ideal for reuse in warehouses, workshops, or garages. Manufacturer: HÖRMANN Type: RenoMatic 42 Year of manufacture: 2023 Door type: Sectional door Design: Double-skinned steel sectional door Thermal transmittance coefficient: 1.4 W/m²K Wind load class: 3 Water tightness: Class 3 Nsdpfxezl D T Aj Am Towi Air permeability: Class 2 Leaf weight: 72.3 kg Available quantity: 4

Condition: good (used), Year of construction: 2002, machine/vehicle number: 4523, punching force: 80 t, sheet thickness steel (max.): 20 mm, Equipment: CE marking, foot remote control, IMS model HY 80 Njdozkwttepfx Am Tjwi