Used Abm Efb2H/3G160F/100/30D32/4 for sale (71,871)

Condition: ready for operation (used), Mitsubishi TRS50B / BN624A559G52 servo drive / servo amplifier, serial number: 8602100, used, in good condition, 100% functional, scope of supply as shown in the photos. Nodpfxs Aa Hmle Ah Sjdc

Condition: used, Weiss   Type: WT11-1000/40   Weiss temperature chamber, air-cooled, with Weiss condenser cooler   Test chamber volume approx. 990 liters   Data for temperature tests:   Temperature range -40°C to +180°C   Temporal temperature deviation in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K   Temperature change rate (according to IEC 60068-3-5) Heating 4 K/min Cooling 3 K/min   Heat compensation max. 4500 W   Feedthroughs installed as standard Nodpfx Aezfzamsh Sjdc R1: NW 125 mm L1: NW 50 m   Dimensions:   Test chamber dimensions: Width 1100 mm x Depth 950 mm x Height 950 mm Housing dimensions: Width 1390 mm x Depth 1525 mm x Height 1995 mm   Maximum load (evenly distributed over the area) of the test chamber floor 150 kg Per insert shelf 50 kg Total load of the shelf supports 100 kg   Data for operation:   Test chamber lighting: Halogen bulb 24V, 50W   Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 11.5 kW Rated current 22 A Heat dissipation water-cooled test cabinets max. heat dissipation to the environment 1.3 kW   Noise measurement: Sound pressure level approx. 64 dB(A)   Refrigerant: (converted to R-452a)   Weight: approx. 840 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: new, machine/vehicle number: 41401994, fuel type: diesel, motor manufacturer: Cummins KTA38-G5, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 8.250 kg Functional Generator capacity: 1.100 kVA Dimensions of cargo space: 450 x 201 x 235 cm CE mark: yes Other information Fuel consumption: 137 Liter / Hour at 75% Load Generator: Stamford S6L1D-E41 Frequency: 50 Voltage: 400 Drill equipment: Battery, Control Panel Additional information Please contact Team DPX for more information Ndodpfx Aeyxahfjh Sec = Additional options and accessories = - Battery - Control Panel

Year of construction: 2026, condition: used, Year of manufacture: 2026 New: Yes Empty weight: 2.250 kg Dimensions of cargo space: 245 x 140 x 200 cm CE mark: yes Ndedpfx Ahoxuzupo Soc Serial number: 2002005 Please contact Team DPX for more information

Year of construction: 2026, condition: used, Year of manufacture: 2026 New: Yes Field of application: Construction Dimensions of cargo space: 230 x 230 x 132 cm Serial number: 26008897 Please contact Team DPX for more information Diesel Fuel Tank 4.500 Liter 4.500 Liter Tank Ndedszu Ialepfx Ah Ssc UL142 Certified

Condition: used, Year of construction: 2014, operating hours: 17,438 h, overall weight: 1,301 kg, load capacity: 210 kg, arm reach: 3,096 mm, This is a used and tested industrial robot KUKA KR 210 R3100 ultra from 2014, featuring a KR C4 controller and KSS 8.3. The system is engineered for heavy-duty applications in industrial automation and is commonly utilized in areas such as material handling, welding, machining, and manufacturing. The robot provides a payload capacity of 210 kg, a reach of 3,096 mm, and has logged 17,438 operating hours. The setup comes with software options including Gripper&SpotTech, Profibus, LoadDataDetermination, and RemoteService. Nodoy Nflqepfx Ah Sodc

Condition: new, functionality: fully functional, machine/vehicle number: 01.3206969317.0003.00, power: 2.2 kW (2.99 HP), rotational speed (max.): 1,400 rpm, input frequency: 50 Hz, type of input current: AC, overall weight: 89 kg, torque: 1,700 Nm, protection type (IP code): IP54, Voltage: 230/400 V (three-phase current) Brake voltage: 400 V AC Insulation class: B This bevel geared motor is a powerful drive solution that is ideal for demanding industrial applications. With its robust design and high efficiency, this motor offers reliable performance at variable speeds. The integrated bevel gearbox ensures a compact design and enables optimum power transmission. It is particularly suitable for conveyor technology, mechanical engineering and other industrial applications where precision and durability are required. Ndodpfxou Datqo Ah Soc

Condition: used, mileage: 422,076 km, power: 316 kW (429.64 HP), first registration: 06/2010, tire size: 385/65R22,5, axle configuration: 8x4, wheelbase: 3,700 mm, color: red, gearing type: mechanical, number of gears: 12, emission class: euro5, suspension: steel-air, Equipment: air conditioning, Technical information Nsdjuc E Nfepfx Ah Sedc Number of cylinders: 6 Engine capacity: 12.777 cc GVW: 32.000 kg Drivetrain Drive: Wheel Make of engine: Volvo Axle configuration Axle 1: Tyre size: 385/65R22,5; Suspension: leaf suspension Axle 2: Tyre size: 315/80R22,5; Double wheels; Suspension: air suspension Axle 3: Tyre size: 315/80R22,5; Double wheels; Suspension: air suspension Axle 4: Tyre size: 315/80R22,5; Steering; Suspension: air suspension Functional Make of bodywork: HIAB = Additional options and accessories = - PTO - Tipper hydraulics

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,200 kg, maximum load weight: 8,300 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 4,500 mm, loading space width: 2,050 mm, loading space height: 400 mm, total length: 6,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis: Central axle trailer, low-bed Fine-grain steel welded construction Gear-supported front leg Telescopic rear support 2 chock blocks with holder Fenders made of sheet steel over both wheels Side impact protection, aluminum Coupling device for central axle trailer Drawbar with tested 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension BPW drum brake axles "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (rocker equalization) Wheels and tires 235 / 75 R 17.5" according to manufacturer's choice Steel rims, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle 24 Volt ABS and ALB, with ABS connector at the front, with connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable Platform TTS Low-lying steel pan, platform floor made of steel/diamond plate, steel walls solidly welded to the floor Platform length 4500 mm Pan front and side with "Load-Lock profile" for attaching lashing straps (8 pieces at the front, 12 pieces on each side) Note: Slight floor waviness due to welding distortion is possible! 2 pairs of lashing eyes, 1 x at the front in the corners of the steel pan and 1 x at the rear in the floor, each 5 tons. Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally movable with handrail on the ramps covered with wood (tip area with steel/diamond plate) with gas spring for single-person operation Ndjdpfji Ri Ebsx Ah Soc Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and tracking behavior possible due to incorrect load distribution) Country of approval/signs Country of approval: Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Painting Frame painted or galvanized, according to customer requirements Ramps, hot-dip galvanized Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements.

Condition: ready for operation (used), Year of construction: 2010, pressure 160 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 400 mm ram stroke speed 200 mm/sec work speed 10.0 mm/min return speed 165 mm/sec work stroke ca. 350 mm dayligth ca. 660 mm oil volume 450 ltr. table height 830 / 950 mm table width 75.0 / 60.0 mm voltage 400 Volt total power requirement 18.5 kW weight 13440 kg range L-W-H 5150 x 2050 x 3150 mm current new price approx. 90.000 euros special price on request ----- ULTIMA PLUS electro-hydraulic press brake with: * increased installation height .. approx. 660 mm * increased cylinder stroke .. approx. 350 mm ----- - in checked condition - machine video - ?v=chgCaXLnpa8 Equipment: - CNC electro-hydraulic die/press brake - CYBELEC CNC control "DNC 880 S" * swiveling control panel, front right Ndodpfx Ahsxaambe Sjc * 2D graphic programming & product display * tool & program library - CNC controlled axes: Y1 + Y2 + X + R axis - CNC electro-motorized back stop, with ball screws (X axis) - CNC electro-motorized Height adjustment of the stop beam (R axis) - 2x manually adjustable back stop fingers (Z axis) - 2x front, movable support arms with T-slot ("Sliding System") - 1x set of bending/insert tools * AMADA / SYSTEM A tool system - Laser protection device in front of the machine - Safety device behind the machine (door) - 1x freely movable foot switch - original operating instructions

Condition: ready for operation (used), Bosch QUVF 100U / 4P-11 / 408 / 3703597-2 servo motor SN: 1070916017, professionally completely overhauled and tested with a 12 month warranty, 100% functional, scope of delivery as per photos, The agreed sales discounts do not apply to this article. Please enquire about price separately! ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Ndedpfougyytox Ah Sec

Condition: new, Bosch SF-A3.0042.030-10.037 servo motor, serial number: 871000003, unused, in open original packaging, 100% functional. Scope of delivery as shown in the photos. Ndjdpfx Ahji D Hgbs Sjc

Condition: new, Heidenhain EXE 922 Standard. 284807-20, Serial No: 41001419, unused, in opened original packaging, 100% functional. Scope of delivery as shown in the photos. Njdpfsi Eaikox Ah Sedc

Condition: new, Siemens 1FK7040-5AK71-1AH2 synchronous servomotor, serial no.: YFA621608601003, unused, 100% functional, scope of delivery as shown in the photos. Ndedpfx Aei D Rfloh Soc

Condition: new, Rexroth MAD130D-0100-SA-N0-BP0-05-N1, part number: R911335340, serial number: 7800106000678, unused, hardly any signs of wear, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! ATTENTION: Please enquire for charges for packing and transport separately! The agreed-upon sales discounts do not apply to this item. Please request the price separately! Ndodsi D Ngvspfx Ah Ssc

Condition: new, Siemens 1FK7080-2AF71-1CH1 synchronous motor, serial number: YFF1614522701001, unused, 100% functional, scope of delivery as shown in the photos. Ndedji D Rrfspfx Ah Soc

Condition: ready for operation (used), Siemens 1FK7100-5AF71-1TG0 synchronous servo motor SN:YFT633774409002, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Njdpfstkhvyox Ah Sjdc

Condition: ready for operation (used), Siemens 1FK7100-5AF71-1TG0 synchronous servo motor SN:YFU739824501001, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Ndedpfx Astkhv Ioh Ssc

Condition: ready for operation (used), Siemens 1FT5074-0AF01-2 - AC motor, Z = see nameplate, SN: YFS729644201001. The motor was completely overhauled at Siemens and then stored for a long period. Used, with normal signs of wear, 100% functional. Scope of delivery as shown in the photos. Nsdpfei D Sxksx Ah Sjdc

Condition: ready for operation (used), Siemens 1FT6062-6AF71-4EG2 synchronous servomotor, serial number: YFS427839701005, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ndsdpfji D Ti Ajx Ah Ssc

Condition: ready for operation (used), Kadia Unipos SPK 2000.40 EAU0100022, machine control unit + analog, serial number 47302ETG, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nodpfxei Ebvgs Ah Sjdc

Condition: ready for operation (used), Siemens 6BK1000-0AE40-1AA0 Box PC 627B (DC), SN: VPB5856631, without hard drive, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nodpfxoi Edkpe Ah Sodc

Condition: ready for operation (used), Siemens 6BK1000-0AE40-1AA0 Box PC 627B (DC), SN: VPA4856158, without hard drive, serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nsdpfx Asi Edkzjh Ssdc

Condition: ready for operation (used), Siemens 6AV7861-3TB00-0AA0 Simatic Flat Panel 19" Touch Industrial Monitor, SN: LBW1004945, Serial number as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ndjdpfx Ahji Edd Uo Ssc

Condition: ready for operation (used), Fanuc A20B-1003-0010/14B / A350-1003-T016 card, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nodpfsulqhgjx Ah Sjdc