Used Agilent/Hp Mass Spectrometer for sale (7,538)

Condition: used, operating hours: 148 h, number of beds: 30, Operating hours: 148, initial registration: 02/02/2026. Initial registration: 02/02/2026. Operating hours: approx. 150. Standard equipment/technical data: ENGINE. Max. power 132/180 kW/hp (ISO 14396). Max. power with power management 155/210 kW/hp. Max. torque 750 Nm, with power management 860 Nm. Registered power 148 kW (ISO 14396). Max. power to the PTO 114/155 kW/hp (OECD). 6 cylinders, 6.6l AGCO Power - 66 AWF, CR, 4V. Exhaust aftertreatment with DOC – diesel oxidation catalyst, SCR 3rd generation & diesel particulate catalyst. Emission standard: Stage 5. Electronic engine control with Vistronic fan control. Engine speed memory. PowerCore engine air filter with coarse dirt extraction. EasyCare cooler package. 305 liter fuel tank. Djdpfx Aezpcu Hopbscn

Condition: new, Year of construction: 2026, _____Standard Equipment / Technical Data Engine Rated Power (ISO) 68 / 90 kW / hp at 2200 rpm Max. Power 71 / 95 kW / hp at 2000 rpm Max. Torque 405 Nm at 1500 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5 Controlled Turbocharger, SCR - Catalyst DOC - Diesel Oxidation Catalyst SCR Particulate Filter Catalyst Hood - single-piece, foldable Exhaust pipe on the right side in front of the cab Fuel tank capacity 198 liters / AdBlue 18 liters Transmission / PTO 16/16-speed Dyna-4, SpeedMatching, 40 km/h PowerControl operation on the left with load-sensing reversing gearbox, clutch operation, 4-stage load shifting with 1 lever, T-shuttle lever in the side console Partially automatic group shifting and Autotronic monitoring Permanently cooled wet disc clutches with independent lubrication system PTO: 540 / 540E / 1000, stub shaft 1 3/8", 6-spline Electrical engagement in the cab PTO START/STOP button on the rear, left fender Hydraulics / Lifting System Open Center system Quick coupler Cat. 2 Upper link control 4,300 daN maximum lifting force, 2 external lifting cylinders Adjustable lifting struts on both sides EHR with external control on both fenders Quick adjustable automatic drawbar coupling Electrical system Thermostart, 120 A alternator Power supply (12 Volt) for external devices with connector Axles / Additional Weights All-wheel drive front axle with switchable differential lock Rear axle ND with flange hub Oil-cooled disc brakes Front fender, width adjusted, rotatable Rear fender width 1.80 m, without extensions Front weight carrier with integrated drawbar and drawbar pin Driver's Seat Vibration-damped standard cab with standard roof, ventilation and heating Integrated safety frame with tinted glazing Doors on both sides with safety steps Steering column adjustable in height and inclination Air-suspended driver's seat with armrests, swivel adapter, safety belt Exterior & wide-angle mirrors Interior mirror Djdpfszpcvdex Apbjcn Analog-digital instrument panel (SIS) Radio preparation with antenna and speakers 4 work lights front and rear on the cab roof 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders Special Equipment: Fuel tank protection PowerControl & Brake on Neutral (clutch effect) 100 l/min, Open Center hydraulic system oil flow coupling (58+42 l/min) Front loader quick coupling system Leak oil collector on quick couplers 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return 2.5t front lift, 1 hydraulic line set, electrical socket MF front loader preparation: foundation set, hydraulic set, electrical control via joystick, PTO: 540/540E, flanged, 6-spline, internal engagement Rear fender extensions - 100mm Tires 480/70R38 & 380/70R28 Air conditioning Cab with mechanical suspension Telescopic exterior & wide-angle mirrors Passenger seat with belt Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter and armrests Rear window wiper / washer system Without MF Connect (MF Telemetry System)

Condition: good (used), Year of construction: 2006, total length: 6,000 mm, total width: 1,950 mm, total height: 3,850 mm, overall weight: 5,000 kg, For Sale: Make: Mecatherm Model: BLOC HPII Included: - Mecatherm pre-proofing cabinet / pre-proofer (without infeed conveyor!) Dcsdozx Er Hepfx Apbsn - control panel - tray supply and discharge conveyor - 90-degree curved conveyor for trays - Mecatherm spreading unit - documentation Conveyor width: 700 mm Spreading conveyor width at the pre-proofing cabinet outlet: 1000 mm 8 rows stacked on top of each other. Price includes careful dismantling and loading into the truck / container. It is possible to view the machine on site. It is currently still set up. If you have any questions or comments, please feel free to call or email us.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Sandwich construction, rear doors, side door Features: - Rear supports - Lashing rails - 25mm insulated wall Net price: €5,168.07 / Gross price: €6,150.00 Article number: BTS113301618.34 Technical data: • Brand: Blyss • Model: FS1330/180HL • Vehicle type: Box trailer • Vehicle condition: New vehicle • First registration: No first registration Dcjdpfxszy Drzo Apben • TÜV/MOT: 2 years from first registration • Interior dimensions (L x W x H): 305 x 159 x 180 cm • Exterior dimensions (L x W x H): 475 x 211 x 237 cm • Loading height of the floor: 52 cm • Permissible total weight: 1,300 kg • Unladen weight: 503 kg • Payload: 797 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • Reinforced, stable, bolted V-drawbar • Hot-dip galvanized frame • Floor panel made of multiplex • Body made of 25 mm sandwich panel, insulated, smooth surface • 2-leaf rear door with rotating bar locking mechanism, lockable • 2x maneuvering handles at the front • 6 lashing eyes recessed in the floor inside • Lashing rail mounted on both sides inside, h= xx cm • Forced ventilation on the side walls: 2x interior fans • Maintenance-free rubber spring axles from KNOTT • Wheel shock absorbers incl. 100 km/h approval • Side door on the front right, lockable from the inside and outside • 2x supports at the rear for safe loading even when not hitched • Reverse automatic • KNOTT overrun device and parking brake • Steel fenders • 13-pin connector • Reversing lights • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any desired options! _____ - Financing or leasing possible - Delivery possible throughout Germany - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer and repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Subject to errors, omissions and prior sale -

Condition: good (used), Year of construction: 1991, pressure 300 t chamfer lenght 4100 mm distance between columns 3710 mm stroke - stepless adjustable 250 mm column arm 330 mm dayligth 500 mm table height 940 mm table width 250 mm working feed 7.0 mm/sec return speed 90.0 mm/sec Control konv. operating pressure max. 305 bar voltage 380 V total power requirement 22.5 kW weight 25200 kg range L-W-H 4320 x 2100 x 3370 mm well-maintained condition (!!) - in checked condition - machine video - ?v=rPOBwTfVReo Equipment: - simple, conventional hydraulic press brake - swiveling control panel, left front - electro-motoric back stop (X axis) * adjustment via front control panel (button) * with analog position display * fine adjustment via handwheel, front - with 3x stop fingers, manually adjustable - electro-motoric depth adjustment (Y1+Y2 axis) Dodpfsxab I Tox Apbecn * with analog position display - 1x split set of 85° deer foot upper tool - 1x MultiV - universal die block, with several V-openings - 2x front, stable support arms - 1x freely movable double foot switch - 1x freely movable 2-hand control - side safety device (swivelling doors) - rear safety device (sliding door) - original operating instructions

Year of construction: 2025, condition: new, Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, doypacks) with zipper. Suitable for middle-sized pre-made bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Two bags are handled per machine cycle, whereby a higher output will be achieved per minute. 2 dosing units are needed and accordingly 2 charging hopper are mounted. The possibility to upgrade the machine with two additional dosing units and charging hoppers does exist, either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). - Specifications: pouch sizes (min.-max.): L(110-260)xW(90-180)mm; filling capacity: max. 1600ml; max. speed of the machine in neutral: 55 cycles/minute (corresponds to max. 110 bags/min); 4.5kW; 33m³/h; machine dimensions: (L)5100x(W)980x(H)1400mm; weight: 2100kg. All product contacting parts made of stainless steel (SS304). Any dosing unit and/or other modules (such as conveyor etc.) shown on the picture are optional modules to this position and only depicted for demonstration purposes. The machine is suitable for variety of composite films. We gladly verify and confirm on basis of sampling the compatibility of the respective composite film. Dsdpsv Nlqusfx Apbscn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Horizontal packaging machine, MINI VERSION, for premade doypacks, block bottom pouches, flat pouches. Modules for specific pouch properties such as zipper, spout, gusset shape can be integrated, optional: batch/date printer, gassing module. Bag detectors checking the correct placement and complete opening of the doypack. The product infeed chute allows immediate pouch filling after the pouch is detected and keeps the sealing area free from contamination at the same time. A special gripper system ensures the right position of the doypack during the filling process before the bag is closed and sealed. MITSUBISHI PLC, SMC vacuum filter, OMRON PID temperature control, AIRTAC-cylinder - Specifications: stainless steel version (SS304); max. speed of the machine in neutral: 10 cycles/minute; bag width: 250-450mm; bag length: 250-500mm; compressed air: 0.2m³/min, 6.5bar; power: 220V, 1 phase; dimensions of the machine: L1150xW950xH1570mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Dedjv Nllrspfx Apbecn

Condition: new, Year of construction: 2025, Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. The rotary machine is especially used for filling all kinds of liquids such as water, juices, sauces such as soy sauce, salad dressings, tomato sauce or liquids with high viscosity such as barbecue sauces/BBQ sauces, honey, up to pasty products such as peanut butter, fruit jam, nut nougat cream etc. The filling and capping machine is equipped with six filling heads for liquid filling and with six heads each for positioning and capping the spout lids. The production process is fully automated from bag feeding, filling, cleaning of the nozzles, feeding the spout lids via lift and capping them, to the output of the final products. To ensure the exact filling volume, the liquid level is constantly monitored. PLC control, touch screen operating monitor (menu available in different languages e.g. English, German etc.). Suitable for premade doypacks with a corner spout or a spout on top. - Specifications: Filling range: max. 150ml (can be customized); number of filling heads: 6; max. number of machine cycles in neutral: 18 cycles/min (corresponds to max. 108 bags/min); current: 220/380V, 3P, 1.5kW; air pressure and consumption: 5-7bar, 0.65m³; liquid contact parts are made of AISI 316 stainless steel, non-contact parts are made of AISI 304 stainless steel; machine dimensions LxWxH: 1800x1150x1950mm; weight: 1000kg. Djdjv Nlm Nopfx Apbocn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. Suitable for premade doypacks with a corner spout or a spout on top. The rotary machine has filling units equipped with two filling heads each for liquid filling and two heads each for positioning and closing the spout lids. Additional equipment: feeding lift for the spout caps, external module for CIP cleaning, air cleaning system for inner area of the machine. Relevant electronic components from Schneider and Omron, PLC and touch screen from SIEMENS, pneumatic components from AIRTAC. - Specifications: Filling range: max. 3000ml; number of filling heads: 6; max. number of machine cycles in neutral: 26 cycles/min; current: 220/380V, 2.5kW; air pressure and consumption: 5-7bar, 0.7m³; machine dimensions LxWxH: 2600x1630x1900mm; weight: 1600kg. Dcjdpev Nlngsfx Apbjn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, doypacks) without zipper. Suitable for middle-sized pre-made bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(80-310)xW(60-180); filling capacity: max. 1200ml; max. speed of the machine in neutral: 50 cycles/minute; 1.8kW; 12m³/h; machine dimensions: (L)1990x(W)970x(H)1390mm; weight: 700kg. All product contacting parts made of stainless steel (SS304). Any dosing unit and/or other modules (such as conveyor etc.) shown on the picture are optional modules to this position and only depicted for demonstration purposes. The machine is suitable for variety of composite films. We gladly verify and confirm on basis of sampling the compatibility of the respective composite film. Dodpfx Apjv Nlntebscn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Horizontally cam driven, intermittent operating filling and sealing machine, to fill and handle pre-made pouches (flat, doypacks) with a spout on top. Suitable for small pre-made bag. Integration of liquid and paste dosing units possible. One bag is handled per machine cycle. 1 dosing unit is normally used and accordingly 1 charging hopper is mounted. The possibility to upgrade the machine with a second dosing unit and charging hopper does exist , either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(80-310)xW(60-180); filling capacity: max. 1200ml; max. speed of the machine in neutral: 50 cycles/minute; 1.8kW; 12m³/h; machine dimensions: (L)1990x(W)970x(H)1390mm; weight: 700kg. All product contacting parts made of stainless steel (SS304). Any dosing unit and/or other modules (such as conveyor etc.) shown on the picture are optional modules to this position and only depicted for demonstration purposes. The machine is suitable for variety of composite films. We gladly verify and confirm on basis of sampling the compatibility of the respective composite film. Dcjdev Nln Hepfx Apbjn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2023, operating hours: 462 h, maximum speed: 50 km/h, front tire size: 540/65 R28 | 0%, rear tire size: 650/65 R38 | 0%, tire size: 650/65 R38, number of beds: 35, Tires (front): 540/65 R28, Tires (rear): 650/65 R38, Operating hours: 462, Initial registration: 19.12.2024_____Initial registration: 19.12.2024, Operating hours: approx. 350 h, Standard equipment/technical data: ENGINE, Max. power 121/165 kW/hp (ISO 14396), Max. power with power management 136/185 kW/hp, Max. torque 790 Nm, with power management 800 Nm, Registered power 134 kW (ISO 14396), Max. power at the PTO 103/140 kW/hp (OECD), 4 cylinders, 4.9 l AGCO Power - 49 LFNT-D5, Exhaust aftertreatment with DOC - Diesel oxidation catalyst, SCR 3rd generation & Diesel particulate catalyst, Emission standard: Stage 5, Electronic engine control with Vistronic fan control, Engine speed memory, Powercore engine air filter with coarse dirt extraction, EasyCare cooler package, 280 liter fuel tank. Dedpew A Hgpefx Apbecn

Condition: ready for operation (used), Year of construction: 2017, total height: 2,800 mm, total width: 2,200 mm, overall weight: 2,500 kg, travel distance X-axis: 1,505 mm, travel distance Y-axis: 1,179 mm, travel distance Z-axis: 1,667 mm, product length (max.): 3,100 mm, number of axes: 3, This 3-axis MASSIVIT 1800 was manufactured in 2017. It features a generous print volume of 1500 x 1170 x 1800 mm and a maximum linear speed of 300 mm/s. The machine is equipped with an inline cleaning system and automatic printhead cleaning for enhanced productivity. If you are looking to get high-quality 3D printing capabilities, consider the MASSIVIT 1800 plastic 3D printer we have for sale. Contact us for further details. • Printing Technology: GDP (Gel Dispensing Printing) • Number of Printheads: 1 • Print Volume: 1500 x 1170 x 1800 mm • Small Z Travel: 174.2 mm • Maximum Linear Speed: 300 mm/s • Typical Printing Speed: 100 mm/s • Productivity: up to 350 mm/h • Layer Thickness: 0.8 / 1.0 / 1.3 mm • Printing Materials: Dimengel 90 / Dimengel 100 • Material System: Single Material • Inline Cleaning System: Yes • Automatic Printhead Cleaning: Yes Dcjdpjz Dhbrofx Apbjn • Massivit Printer Software: v4.0.2 • Massivit Smart Software: v4.0.2 • Maximum Object Weight: 150 kg • Crated Dimensions: 3500 x 2300 x 2600 mm • Crated Weight: approx. 3000 kg • Power Supply: 380–400 V • Power Consumption: approx. 10 kW • Compressed Air: 6–8 bar • CE Marking: Yes Additional equipment • Compressor

Condition: new, pressure: 40stroke: 250table diamension: 625 x 1.100total power requirements: 4,0weight approx.: 0,92messurements (LxWxH): 1,15x0,70x0,95 Dcjdpfx Apod Ab Iasben

Condition: new, pressure: 22stroke: 200table diamension: 625 x 1.100total power requirements: 2,2weight approx.: 0,635messurements (LxWxH): 1,100x0,630x0,925 Dcjdpfx Apod Ab Ibjbon

Condition: good (used), Year of construction: 2020, operating hours: 217 h, functionality: fully functional, machine/vehicle number: 62006078, operating pressure: 2,800 bar, total length: 4,670 mm, high-pressure hose length: 10,000 mm, total height: 2,540 mm, total width: 1,970 mm, pressure: 2,800 bar, empty load weight: 2,750 kg, fuel: diesel, overall weight: 2,750 kg, water tank capacity: 160 l, fuel tank capacity: 200 l, power: 160 kW (217.54 HP), volume flow: 1.62 m³/h, noise level: 111 dB, Equipment: crane, DYNAJET UHP 220 2800 | 2020 | Low Hours Dcjdoz D Ew Repfx Apbon This DYNAJET UHP 220 2800 from 2020 is available in excellent condition and has only 396 engine hours and 216 high-pressure hours, making it a highly attractive alternative to a new unit. Delivering up to 2,800 bar and 27 l/min, the UHP 220 is designed for the most demanding water jetting applications, including paint removal, rust removal, concrete rehabilitation, and industrial surface preparation. Powered by a reliable 220 HP Volvo industrial diesel engine, the machine combines exceptional performance with low operating costs and proven durability. The integrated DYNAJET Easy Control II system allows precise pressure adjustment and simple operation, while the twin-axle trailer ensures easy transport between job sites. With its low operating hours and robust DYNAJET construction, this machine is ready for immediate work and many years of productive service. Key Features and Advantages: *Model year 2020 *Only 396 engine hours *Only 216 high-pressure hours *Operating pressure up to 2,800 bar *Maximum flow rate 27 l/min *220 HP Volvo industrial diesel engine *DYNAJET Easy Control II with colour display *Low-speed high-pressure pump with carbide plungers *Large fuel tank for extended operation *Twin-axle trailer for easy transport *Ideal for paint removal, rust removal and concrete removal *Fully operational and ready for immediate use For pricing, availability, or further technical information, please contact us.

Condition: used, mileage: 633,000 km, power: 460 kW (625.43 HP), first registration: 04/2016, axle configuration: 8x4, gearing type: mechanical, number of gears: 255, emission class: euro6, Year of construction: 2016, Equipment: air conditioning, trailer coupling, = Additional options and accessories = - Coupling - Low-noise - PTO - Spotlight front - Spotlight rear - Toolbox = More information = Front axle 1: Steering Front axle 2: Steering Djdpfjy T Ii Tsx Apbjcn Empty weight: 23.200 kg Carrying capacity: 8.800 kg GVW: 32.000 kg

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 10,000 h, power: 66.19 kW (89.99 HP), maximum speed: 40 km/h, motor manufacturer: perkins, gearing type: semi-automatic, Equipment: front-end loader, hydraulics, lighting, power shift gear, trailer coupling, mechanical reversing gearbox loader mower good mechanical condition Dcsdpfx Ajz Egmvopbsn

Condition: used, Year of construction: 2011, functionality: unexamined, machine/vehicle number: S16W80-11-4, load capacity: 20 kg, arm reach: 1,717 mm, controller manufacturer: Yaskawa, controller model: DX100, teach pendant manufacturer: Yaskawa, teach pendant model: JZRCR-YPP01-1, input voltage: 400 V, type of input current: three-phase, repeat accuracy: 0.06 mm, For sale is a Yaskawa Motoman HP20D 6-axis industrial robot with DX100 controller, teach pendant, connection cables, and a customer-specific pneumatic gripper/handling device. Technical data and specifications: - Model: Motoman HP20D - Robot type: YR-HP0020D-B00 - Year of manufacture: 07/2011 - Serial/order number: S16W80-11-4 Djdpfxez Ebn Ue Apbscn - Axes: 6 - Payload: 20 kg - Horizontal reach: 1,717 mm - Repeatability: ±0.06 mm - Robot weight: 268 kg - Maximum pneumatic pressure: 490 kPa - Controller: Yaskawa DX100 - Controller type: ERDS-HP0020D-E02 - Power supply: 400/415/440 V, 3-phase, 50/60 Hz - Average connected power: 2.0 kVA - Full load current: 5.8 A - Teach pendant: JZRCR-YPP01-1 Visible scope of supply according to the images: - Robot arm on welded steel base - DX100 control cabinet - Teach pendant - Robot, operator device, and connection cables with CEE plug - Customer-specific pneumatic gripper/handling device Used condition with paint chips, scratches, and dirt. The robot has not been re-tested for functionality after disassembly; therefore, it is sold as untested. The function and suitability of the customer-specific gripper device have not been tested. Scope of supply according to the images. Price net, EXW Kirkel. Loading and organization of transport are possible for an additional charge and upon prior agreement. Transport costs depend on the destination and scope. Sale subject to prior sale.

Condition: used, Year of construction: 2000, total length: 4,100 mm, total width: 1,900 mm, total height: 3,000 mm, Colour: Blue Weight: 20.000 kg Price: On request - Year: 2000 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 80960 - Drive system: CNC Dcodpfx Apozmaa Iobjn - Power [kW]: 22.5 - Press force [ton]: 300 - Max. working width [mm]: 3600 - Column gap [mm]: 3100 - Throat depth [mm]: 500 - Backgauge depth [mm]: 850 - Max. stroke [mm]: 250 - Tools included: Yes - Transport dimensions: 4100mm x 1900mm x 3000mm (l x w x h) - Transport weight [kg]: 20000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), color: red, lifting height: 34,000 mm, Year of construction: 2018, operating hours: 1,230 h, Drivetrain Drive: Wheel Make of engine: Yanmar Weights Empty weight: 3.500 kg Functional Lifting capacity: 1.500 kg CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Delivery terms: EXW Upper hours: 1230 h Production country: DE Dedpsz A Al Aefx Apbecn Additional information Please contact Michael Overmeer for more information = Additional options and accessories = - Hook blocks = Remarks = Klaas K 23-33 TSR City trailer crane construction year 2018 with only 1.230 hours from the first owner. Machine is in a nice condition and has among other things: passenger basket included, remote controlled wheel drive, automatic leveling, hydraulically folding support legs, hydraulic jip. Changes and typographical errors reserved.

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 14,178 h, load capacity: 5,000 kg, lifting height: 4,260 mm, free lift: 2,000 mm, fuel type: diesel, mast type: duplex, construction height: 2,880 mm, fork carriage width: 1,260 mm, fork length: 1,350 mm, empty load weight: 7,390 kg, total length: 4,200 mm, drive type: Diesel, construction width: 2,150 mm, Sideload forklift Dedpjz Ev A Tofx Apbocn Load center: 650 Fork width: 180 mm Fork thickness: 50 mm Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: normal Front tire type: Superelastic Front tire size: 27x10-12 Rear tire type: Superelastic Rear tire size: 27x10-12 Description: In addition to this Jumbo model, we have around 200 heavy-duty forklifts, compact forklifts, lift trucks, and sideloaders available in our Hamburg and Gdansk warehouses. Visit our homepage – sago-online. Leasing and financing on favorable terms are always available. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this J/SNHP 50/13/42V. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom construction of forklifts from 8 tonnes and up. We can also display your vehicle for consignment sale at our facility. Fork positioner, Fork positioner opening range: 380 / 1245 mm Heater, full cab, full free lift, Platform height: 880 mm

Condition: excellent (used), mileage: 207,559 km, power: 315 kW (428.28 HP), first registration: 12/2011, fuel type: diesel, axle configuration: 6x4, wheelbase: 5,720 mm, fuel: diesel, fuel tank capacity: 15,000 l, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, total length: 9,000 mm, total width: 2,500 mm, Year of construction: 2011, = Additional options and accessories = - PTO = Remarks = Wiedemann Reichhardt 15m³ kolkenzuiger (type: 12.0/2.5 - 320) - bovenzijde, links- en rechtsverschuifbaar (zuigslang Ø200 mm) - Hogedrukslanghaspel achterzijde (120 meter hogedrukslang Ø19 mm) - Capaciteit: 3.000 m³ per uur - Speck Hogedrukwaterpomp (type: P45-75 180) - Achterwaarts kippende opbouw met hydraulische bediening - Extra inspectieluiken op slibtank voor reiniging en onderhoud - Welvaartsweegsysteem (type: Delta 30) - Radiografische afstandsbediening = More information = Technical information Number of cylinders: 6 Engine capacity: 12.780 cc Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels; Steering Weights Empty weight: 16.700 kg Carrying capacity: 15.300 kg GVW: 32.000 kg Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Identification Registration number: BZ-RB-28 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Dodpfx Asymrfkspbscn Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Year of construction: 2023, operating hours: 2,495 h, Operating hours: 2495, first registration: 01/16/2024. Model year 2024. 2,478 operating hours. Front hydraulics, 4.8 tons. Hydraulic top link. Fixed K 80 ball head. Automatic trailer coupling. Front axle suspension. Rear tires: 710/70-R42, front tires: 600/70R30. 2 rotating warning lights. 16 LED work lights. Datatronic 5 front/rear. MF Connect. Hydraulic pump, 205 l. 50 km/h. MF Auto Guide. Maintenance recently performed. Price: 134,000 euros (net). Internal number: 14688. Location: Patrick & L. Michels. Dsdpfsz D Rc Sox Apbocn

Condition: refurbished (used), 1 overhauled HAU table polishing machine, model T1500 (maximum part processing length 1500 mm), with 1 PES/3 polishing station and a control cabinet. Dcodpfxsw Au A Eo Apbjn The table was disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The guide shafts were re-bearinged, and a new gearbox was installed. + 1 PES/3 polishing station, 11 kW (pneumatic lifting, 100 mm oscillation AND motorized height adjustment). Max. wheel width 400 mm, max. wheel diameter 400 mm The station was completely disassembled, inspected for damage (damaged parts were replaced), cleaned, and repainted. The polishing shaft was completely re-bearinged, including the liner bearings. The oscillation device was also completely re-sealed. New motor, pulleys, and drive belt were installed. + 1 new control cabinet for controlling the above-described system. Table speed and polishing wheel speed adjustable via frequency converter.