Used Amada Bending Cell for sale (4,496)

Condition: not inspected (used), Bluhm Systems Marking Laser Lhjdjzgci Eopfx Afwsk Here we offer a Bluhm Systems marking laser. Bluhm Systems marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30W are Class IV lasers according to IEC 825 and EN 60825 standards (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product of a specific protection class, according to the aforementioned standards. The e-SolarMark is a laser system for marking and engraving plastics, metals, and films, both stationary and in motion. Technical specifications e-SolarMark description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system operation, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser specification in standard configuration Laser type: Fiber laser Laser output power: FL2 model: 19W; typical Wavelength: 1062 nm typical Internal modulation: 20 to 80 kHz Scanner head description: Scan head: Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens types and their properties: Lens marking field: 70x70 mm to 300 x 300 mm Focal length: B 192 mm Operating environment conditions: Relative humidity: up to 80%, non-condensing Operating temperature: 5 - 40°C Recommended operating temperature: 15-25°C Dimensions W x H x D Laser unit: 122 x 108 x 495 mm Control unit: 520 x 380 x 215 mm Cable length, marking/control unit: 3 m Weight, marking unit: 5 kg Weight, control unit: 15 kg Mains voltage 115/230 VAC, 50/60 Hz, single-phase. Power consumption, FL2 model: 450W Type: e-SolarMark FL Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: 7001922, input voltage: 400 V, Equipped with 4 M-20iD/12L Fanuc robots. Ljdpfx Afsy T Ulzjwjhk Installation dimensions: 16,000 x 4,000 x 3,400 mm.

Condition: used, Rebar Bending Machine, Reinforcing Steel Bender, Alba DAR 45, Used Machine Manufacturer: Alba (Spain) Type: DAR 45 (Dobladoras Automáticas) Ljdpfxoy Rh Rfo Afwshk Overall dimensions: Width: 1300 mm Depth: 800 mm Height: 830 mm Weight: 555 kg Electrical data: 400 V Maximum bending diameter: Ø 45 mm (single bar, for 450 N/mm² steel grade) Bending speed: 2 speed settings (higher speed for smaller diameters)

Condition: ready for operation (used), Year of construction: 2025, number of axes: 7, This 7-axis FRONIUS TransSteel 4000 Pulse Welding Cell was manufactured in 2025. It features advanced Steel Transfer Technology and Pulse MIG/MAG capabilities. The system includes a Universal Robots UR10e cobot, a Siegmund welding table, and a Fumator Minivac 200D extraction unit. If you are looking to get high-quality welding capabilities, consider the FRONIUS TransSteel 4000 Pulse Welding Cell we have for sale. Contact us for further details. - Technology: Steel Transfer Technology / Pulse MIG/MAG- Cobot / Robot Brand: Universal Robots- Cobot / Robot Model: UR10e- Cobot Year of Manufacture: 2025- Welding Table Brand: Siegmund (Extreme 8.7 series, perforated grid pattern)- Extraction Unit Brand/Model: Fumator Absaugtechnik / Minivac 200D- Extraction Unit Controls: Start, Stop, Filter Reset, Suction Power Regulation- Included Documentation: German User Manual (UR10e) and Heidenbluth documentation binders- System Configuration: Robot mounted on a linear 7th-axis track system running alongside the welding table- Additional Equipment: Welding torch, hose packages, integrated cable carrier chain (energy chain), control cabinet with main switch, teach pendant, shielding gas cylinder rack Ledpfszic Elex Afwehk

Condition: new, Year of construction: 2026, working width: 31,400 mm, bending angle (max.): 155 °, overall weight: 700 kg, total length: 36,000 mm, total width: 900 mm, total height: 1,100 mm, warranty duration: 12 months, bending cheek thickness: 30 mm, clear span: 80 mm, working height: 900 mm, Equipment: documentation/manual, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench ZGR3000/1,2 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 3140mm - Sheet metal thickness up to 1,2mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 155° -Bending beam: 28 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 700kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 360 EUR All prices are plus 19% VAT. Lhsdpfx Aszdcmaefwjk Self pickup Certificate CE Guarantee: 12 months. Self pickup

Condition: excellent (used), functionality: fully functional, Capasity 30 cm3. Flat steel 200 x 30mm (800mm diam) flat stell standing 100 x 18mm (800 mm diam) Ledpfx Afszhmbuswshk

Condition: good (used), Bending tool, die, lower knife, lower tool, prism tool Lhjdpfx Afex S D U Aswsk -Tool: for press brake, 7-piece set -Total length: 1053 mm / each 1x 238/58/390/100/270 mm / 2x 75 mm -Width/Height: 97 mm -Weight: 75 kg

Condition: new, sheet width 1250 mm Ljdpfx Afoxaacvewshk plate thickness 5.5 mm pre-bending 5.0 mm roll diam. toproll 140 mm min. dia. 210 mm turning speeds 5.7 U/min engine output 2.2 kW weight 1365 kg range L-W-H 2020 x 900 x 1.200 mm Furnishing: - Robust electro-mechanical bending machine - 2x central rollers driven by an electric motor (top and bottom roller) - Top roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - Lower roller manually adjustable, by hand wheel - asymmetrical roller arrangement - self-braking main motor - Safety device (safety line with switch unit) - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized side roller adjustment - Digital position display for motor-driven adjustable side roller

Condition: new, sheet width 3100 mm plate thickness 13,0 mm pre-bending 10,0 mm Lhsdpfoxabfljx Afwek diameter of upper rolls 300 mm side roll diameter 210 mm diameter of lower rolls 270 mm total power requirement 11,0 kW Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 1600 mm plate thickness 15,0 mm ST pre-bending 13,0 mm ST diameter of upper rolls 230 mm side roll diameter 210 mm diameter of lower rolls 190 mm total power requirement 7,5 kW weight of the machine ca. 4225 kg. dimensions of the machine ca. 4000 x 1300 x 1440 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) Lsdpfxoxabkhj Afwshk - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, bending diam. - max. 36.0 mm ST cutting thickness max. 36.0 mm ST motor 1450 U/min oil volume 32.0 l motor 380 Volt 50 Hz total power requirement 5.5 kW weight 650 kg range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm Lhsdpfx Aoxabntefwok * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Condition: new, tube diameter 33,7 x 3,4 GAS mm tube diameter 35,0 x 2,5 STAHL mm Lhsdpfxexab E Sj Afwek tube diameter 35,0 x 1,5 EDELST mm bending radius min. R10 - R 190 mm bending angle max. 0 - 180 ° tool taper 6-kant 40 mm voltage 230 V total power requirement 0,9 kW weight of the machine ca. 23,0 kg Description: - MediBender "070" digital - with maximum bending performance for 35 x 2.5 mm steel tubes - Excellent bending quality with very tight bending radii . (from 2 x tube diameter) and bending angles between 0° and 180° - Easy to operate - High accuracy and reliability - Fast tool changes (within seconds) - Easy to transport - Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: as good as new (ex-display), Year of construction: 2022, sheet width 1070 mm plate thickness 4.0 mm pre-bending 3.0 mm roll length 1070 mm roll diam. toproll 110 mm bending speed 3.0 m/min engine output 2.2 kW weight 848 kg range L-W-H 2250 x 1000 x 1800 mm New price ~ 10.000 euros Exhibition machine - like NEW (!!) Lhedpfxjxacdpj Afwok Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (top & bottom roller) - right/left running of the rollers - top roller can be manually swiveled out, with folding bearing - manual delivery of the side roller - including conical bending device - asymmetrical roller arrangement - rollers with profile inlets - safety device (safety line with switch unit) - 1x freely movable control panel - operating instructions (ENG)

Condition: good (used), Year of construction: 1999, overall weight: 2,900 kg, total length: 1,800 mm, total width: 1,900 mm, total height: 2,200 mm, Length:1800mm Ljdpfx Afeycu E Eowehk Width:1900mm Height:2200mm Weight:2900kg

Condition: excellent (used), Year of construction: 2023, tube diameter 42.0 x 3.0 STAHL mm tube diameter 30.0 x 2.0 EDELST mm bending angle max. 180 ° bending radius max. 100 mm bending speed 2.0 U/min. Control NC voltage 400 V total power requirement 0.55 kW weight of the machine ca. 115 kg Current new price approx. 4.200 Euro Very good condition / with machine base Description: - NC electro-motor tube bending machine - mandrelless * up to 50 programs can be stored - Automatically returns to the starting position - Maximum bending capacity for 42 x 3.0 mm steel tubes - Excellent bending quality with very tight bending radii (from 2x tube diameter) . and bending angles between 0° and 180° - Easy operation - High accuracy and reliability - Quick tool change (within seconds) - Easy to transport Lhsdex U El Iopfx Afwek - Includes machine base

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: 10659, roller (bottom) diameter: 300 mm, roller (top) diameter: 350 mm, working width: 3,000 mm, sheet thickness (max.): 25 mm, empty load weight: 24,000 kg, TECHNICAL DETAILS Number of rollers: 4 pcs Max. sheet thickness: 25 mm Max. working width: 3,000 mm Upper roller diameter: 350 mm Lower roller diameter: 300 mm MACHINE DETAILS Control: Conventional Dimensions & Weight Dimensions (L x W x H): 6,300 x 2,000 x 1,800 mm Unladen weight: 24,000 kg Transport packages: 1 pc. Lhsdpfjyua Ezsx Afwok

Condition: good (used), Bending tool, bending tool, die, upper blade, upper tool, straightening tool -Bending tool: Length 1760 mm -Tool angle: 83° -Dimensions: see drawing in the photos Lhodpfoxugm Rex Afwok -Dimensions: 1760/28/H144 mm -Weight: 44.6 kg

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2007, controller model: ATL 550, working width: 4,100 mm, bending force (max.): 135 t, distance between stands: 3,600 mm, Refurbished machine Haco press brake type PPM 4m x 135T ATL 550 control Motorized back gauge X-axis Manual crowning table Monobloc punch Monobloc die Lhjdsxanlfepfx Afwjk

Condition: used, functionality: fully functional, Hydraulic mandrel tube bending machine Complete bending sets with bending mandrels and bending shoes: Ø 18, 20, 22, 25, 2 x 30 + 35 mm Additional bending mandrels without bending shoes: Ljdpfownrt Sex Afwshk Ø 28, 2 x 38 + 42 mm Pre-assembly device with hydraulic cylinder Hydraulically driven deburring unit for tubes, inside and outside, from 6 - 48.3 mm Max. tube feed length: 3000 mm Machine weight: approx. 700 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2025, tube diameter 48,3 mm wall strength 3,25 mm bending radius min. max. 180 mm Bending speed 20 °/sec total power requirement 2,4 kW weight of the machine ca. 700 t dimensions of the machine ca. 3880 x 800 x 1250 m Description: Round tube steel (S235): 60.0 x 6.0 mm Lhedpfx Afexcuicowek Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 4900 € 109.71 € Lhjdewirv Njpfx Afwjk 1050 mm 3 mm 2 mm 90 mm 2080 mm 700 mm 1250 mm 410 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by handwheel lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll conical rolling device user manual in GERMAN

Condition: new, Year of construction: 2023, neu 2023 9656 prompt, Zwischenverkauf v Türkei 2600 € 1 1 1050 mm 1 mm 56 mm 1400 mm 700 mm 1120 mm 185 kg 3 Walzen Ljdpfx Aewira Ujfwjhk asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH

Condition: new, Year of construction: 2024, 1050 mm 5.5 mm 5.0 mm roll diameter 130 / 195 mm 2.2 kW 1050 kg 2150 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor Lodpfx Afsq Sz Ahowohk - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment

Condition: used, Frame size: 4100 x 2520 mm Lhodpfx Afjxct Anewek Cabin size: 3000 x 2520 x 2500 mm high + chimney: 600 mm

Condition: new, Year of construction: 2026, actuation type: electric, number of rollers: 3, shaft diameter: 30 mm, - Shaft diameter 30 mm - Can be operated in both clockwise and counterclockwise directions Lodpfszmc T Dox Afwohk - Suitable for horizontal and vertical applications - Foot pedal control - Emergency stop switch - Documentation - 400V