Used Andreoni Automatic Engraving Pantograph for sale (23,389)

Condition: used, Year of construction: 1996, cutting diameter 15 - 300 mm saw band length 4640 mm cutting width 1,3 mm cutting range - square - 300 x 300 mm feed length 600 mm feed length: multiple 5400 mm dimensions of saw-band 4640 x 41 x 1,3 mm cutting speed 19 - 130 m/min min. cut-off length 10 mm height of material-table 700 mm total power requirement 7 kW weight of the machine ca. 2,7 t dimensions of machine L x W x H 2,35 x 2,34 x 1,95 m Accessories: chip conveyor, DRO for cutting length, coolant Dsdpfszwxxksx Ab Docl

Condition: used, Year of construction: 1998, number of spindles 6 spindle passage 27 mm turning length 59 mm hexagon material 24 mm square material 18 mm cross slide travel 36 mm longitudinal slide travel 85 mm spindle turning speed range 366 - 5020 U/min Dodpovh Naqsfx Ab Dscl max. torque 95 Nm control INDEX total power requirement 20 kW - 6 cross slides - 6 longitudinal slides - polygon device - thread cutting device - hydr. tapping device - workpiece removal belt - bar loading magazine PIETRO CUCCHI, model AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant

Condition: used, Year of construction: 2008, operating hours: 25,885 h, gearing type: automatic, color: other, Year of manufacture: Apr 2008 Axle 1: left 10 mm right 10 mm Dsdpfx Asy N Ab Njb Dscl Axle 2: left 12 12 mm right 12 12mm Axle 3: left mm right mm

Condition: used, Year of construction: 2008, operating hours: 24,869 h, gearing type: automatic, color: other, Year of manufacture: Apr 2008 Axle 1: left 10 mm right 10 mm Axle 2: left 12 12 mm right 12 12 mm Axle 3: left mm right mm Dsdpfjy N D Rlex Ab Decl

Condition: used, machine/vehicle number: XLWRT222079306537, fuel type: diesel, color: other, gearing type: automatic, Year of construction: 2007, operating hours: 21,826 h, Year of manufacture: May 2007 Dcedpfxjy T H Ars Ab Dol Axle 1: left 18 mm right 18 mm Axle 2: left 6-6 mm right 6-6 mm Axle 3: left mm right mm

Condition: used, Year of construction: 2010, gearing type: automatic, color: other, Year of manufacture: Apr 2010 Dsdpfsy Enkbsx Ab Dscl Axle 1: left 8 mm righ8 mm Axle 2: left 8 8 mm right 8 8 mm Axle 3: left mm right mm

Condition: used, mileage: 24,414 km, power: 115 kW (156.36 HP), first registration: 08/2024, fuel type: diesel, fuel: diesel, CO₂ emissions: 233 g/km, color: white, gearing type: automatic, number of gears: 8, emission class: euro6, number of seats: 3, Year of construction: 2024, Equipment: ABS, Apple CarPlay, air conditioning, cruise control, navigation system, power assisted steering, power mirror, sliding door, trailer coupling, = Additional Options and Accessories = - Adaptive Cruise Control - Alarm system, Class III - Armrest - Heated exterior mirrors - Hands-free system - Third brake light - Air conditioning - Leather steering wheel - Multifunctional steering wheel - Rear parking sensors Dsdpfx Aezvqkpsb Docl - Radio - Spare tire - Rearview camera - Sliding door on the right side - Immobilizer = Additional Information = Number of doors: 5 Number of cylinders: 4 Engine displacement: 2,287 cc Unladen weight: 2,249 kg Payload: 1,251 kg GVWR: 3,500 kg Number of previous owners: 1 APK (Technical Inspection): valid until 08.2027 Manufacturer: IVECO Schouten Used B.V. / Altena Trucks B.V. Almweg 4, 4286LG ALMKERK, NL

Condition: used, Year of construction: 1991, saw blade diameter 275 mm cutting diameter 90 mm cutting speed 80 m/min EISELE Miter Circular Saw VMS 120 Saw blade diameter: 275 mm Cutting capacity at 90° (round): 90 mm Cutting capacity at 90° (rectangular): 75 × 75 mm Cutting capacity at 45° miter (rectangular): 75 × 75 mm Saw blade speed: 40 / 80 rpm Drive motor: 380 V, 1 / 1.2 kW Djdpfx Abex Avtvj Decl Required floor space: 700 × 600 × 1580 mm Weight: approx. 180 kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Kaltenbach KBS 400 NA metal bandsaw, automatic (2020) Manufacturer: Kaltenbach Type: KBS 400 NA Year of manufacture: 2020 Condition: used, very good, operational Bandsaw blade (mm): 5,730 x 41 x 1.3 mm Motor power (kW): 4 Cutting speed (mm/min): 15-90 Bandsaw blade feed rate (m/min): 0-300 Swivel range: 115° Round stock 90°: 350 mm Dcjdpfx Abjzww Auo Dol Round stock 45°: 350 mm Square stock 90°: 400x350 mm Square stock 45°: 315x350 mm Working height: 720 mm Weight: 3600 kg CNC-controlled cutting angle adjustment Separately driven chip brush Automatic material feed gripper with a stroke length of 2,600 mm for single stroke Hydraulic blade tensioning Electronic bandsaw blade slippage monitoring

Condition: used, Year of construction: 1997, cutting diameter / mm saw band length 8800 mm Dsdpfx Ajy S D Rqob Docl cutting width / mm total power requirement / kW weight of the machine ca. / t required space / m

Condition: used, Year of construction: 1978, cutting diameter / mm saw band length 8800 mm cutting width / mm total power requirement / kW weight of the machine ca. / t Dcsdoy S Drbepfx Ab Del required space / m

Condition: used, cutting diameter / mm Dcjdpfx Abjzcgkmj Djl saw band length 8800 mm cutting width / mm total power requirement / kW weight of the machine ca. / t required space / m

Condition: new, cutting diameter 570 mm saw band length 7250 x 41 mm cutting width 1,3 mm capacity 90 degrees: square 550 x 550 mm capacity 90 degrees: flat 550 x 700 mm total power requirement 4 kW weight of the machine ca. 6050 kg required space 2600 x 1300 x 3700 m The KLS 550 x 700 is a semi-automatic and column guided horizontal bandsaw. Standard specifications Dodpoymf Sdsfx Ab Djcl - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Switch - Stop System - Automatic Ball Screw Lubrication - Led Lighting - Swarf Conveyor - Swarf Carrying - 1400 mm Feeding Drive - Double Roller Table - Material End Detector - Program Saving System - USB Connection Output - PLC Control & Touch Screen - Inverter Optional specifications - Laser Line - Lubrication Mist - V Shape Vice - Extra Double Roller Table - Upper Clamp System - Curve Cutting Detecting Sensor The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: new, saw blade diameter 550 mm Number of revolutions 3580 r.p.m hole of sawblade 32 mm Control NC total power requirement 3 kW weight of the machine ca. 250 kg required space 980 x 1130 x 1430 mm The Gerd Wolff AC 550 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Schnittbereich 90° rund: 155 mm Schnittbereich 90° quadratisch: 155 x 155 mm Schnittbereich 90° rechteckig: 260 x 200 mm Schnittbereich 45° rund: 130 mm Schnittbereich 45° quadratisch: 130 x 130 mm Schnittbereich 45° rechteckig: 180 x 200 mm Standard Accessories - Location points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air gun Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting Dodeymf Tbjpfx Ab Docl - Auxiliary conveyor with rulers

Condition: new, saw blade diameter 400 mm Number of revolutions 3000 r.p.m hole of sawblade 32 mm sawblade width 4 mm Control NC total power requirement 1,5-2 kW weight of the machine ca. 162 kg required space 740 x 780 x 1350 mm The Gerd Wolff AC 400 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Dodpfxoy S Dwws Ab Decl Standard Accessories -BLocation points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air pistol Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Condition: used, Year of construction: 2017, Automatic cold press Manufacturer: CMB Type: PFR-CCL Year of manufacture: 2017 Technical data: Motorized loading table 3,500 x 1,600 mm for manual assembly of the plates and automatic loading into the press on the 1,600 mm side. Structure made of welded steel profiles. Devices for adjusting the working height to compensate for unevenness in the floor. Steel rollers. Foot switch. PRESS Plate size: 5,500 x 1,600 mm Loading side: 1,700 mm Stroke: from top to bottom Opening: 450 mm Cold press The plates are made of steel sheet and attached to a steel frame structure. Maximum pressing force: 160 tons. Specific pressure (on 100% of the area): 1.82 kg/cm2 Specific pressure (on 80% of the area): 2.27 kg/cm2 Pressure cylinder: 12 x 80 mm Auxiliary cylinders: 6 x 50/30 mm Power supply: 400 Volt EU/50 Hz/3 PH. + G AUTOMATIC LOADING and UNLOADING of the plates on the lower plate, on the 3,500 mm side. The transport is carried out via a motorized MYLAR belt. The belt is activated by 2 rollers, one of which is located at the entrance and one at the exit of the press. The rollers are driven by a motor with a chain that slides on special guides. The Mylar belt rotates around the lower plate, which rests on special side supports. Dodjzuzw Depfx Ab Decl The belt rotates on 2 rollers, which are located at the entrance and exit of the press. The ends of the MYLAR belt are attached to special rods with devices for tensioning the MYLAR. The upper plate is covered with a Mylar film. The press plates consist of thick steel sheets that are welded to the frame structure. HYDRAULIC UNIT with pump, oil tank and valves for operating the pressure cylinders and auxiliary cylinders that move the upper plate. The hydraulic control unit is located in the upper part of the press to facilitate maintenance. CONTROL PANEL with buttons and switches. Pressure control manometer on the front of the press. UNLOADING MOTORIZED ROLLER TABLE 2,000 x 1,600 mm The unloading table is located at the exit of the press for manual unloading of the pressed plates. Exit side from the press: 1,600 mm. Note: The loading table of the press with the dimensions 3,500 x 1,600 and the unloading table with the dimensions 2,000 x 1,600 are shorter than the press table with the dimensions 5,500 x 1,600, as the press was installed in a line. Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control Automatically Calibrating Sanding Machine Manufacturer: SCM Type: DMC system Year of manufacture: 2021 Technical data - Working width 1,350 mm - Belt feed speed 2 to 16 m/min - PRO SAND electronic control - PLC terminal with 10.4" LCD color display Unit 1 TIE 5000 working unit for additional table, internal cross-padding - Sequencing system of the unit for belt change by only one machine operator - Automatic brake - Linear blower with timed activation for belt cleaning - Belt dimensions: 150 x 5,000 mm - Chevron belt dimensions: 140 x 4,710 mm PE16T EPICS electronic sector sanding, pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Motor with inverter power up to 15 kW Unit 2 DO19 orbital unit for 19 rotating disc brushes - Manual adjustment of the unit's working position - 1.1 kW main motor with inverter drive - Independent motor for controlling the orbital movement - Diameter of the rotating disc: 125 mm FT/19/125 Set with 19 rotating discs, diameter 125 mm Unit 3 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 4 BF300 working unit for brush roller, diameter 300 mm - Manual adjustment of the roller's working position - 4 kW main motor with inverter drive FT 300 brush roller, diameter 300 mm Unit 5 SC 2620 working unit for super finish pad - Rotation of the belt in the opposite direction of the conveyor belt - Electronic belt swiveling control - Disc brake - Chevron belt dimensions: 1,370 x 2,186 mm - Belt dimensions: 1,370 x 2,620 mm Dcsdpfxjzuzbcj Ab Djl PE16/C EPICS electronic sanding block with sector pitch 16 mm - 16 mm distance between sectors from center to center - Double-acting pneumatic cylinders with adjustable feed/counter feed - Graphite cloth with quick extraction device - Complete management of functions via the electronic Pro Sand control - Inverter motor with a power of up to 15 kW Inverter-controlled vacuum motor integrated into the machine frame, up to 7.5 kW - Rubber-coated conveyor belt, 50 Shore - 4 kW conveyor belt motor with inverter drive Console with integrated PC eye-M and electronic Maestro Pro Sand control with tele service system Device connected to the machine that enables the use of the Maestro Pro Sand software. The integrated LED light strip enables the operator to monitor the machine's status in real time (emergency, operation, etc.) without having to be near the machine itself. It is equipped with a fanless industrial PC with protection class IP53 (IP65 on the front). This robust solution guarantees the highest level of resistance even under the most adverse environmental conditions that an industrial site can offer. The 21.5" LCD color display with a large 16/9 touchscreen enables particularly easy and efficient control of the machine's most important functions: - Full HD display resolution 1920x1080 - LED backlight - Capacitive

Condition: used, Year of construction: 2008, Automatic circular saw machine Manufacturer: Kasto Type: KASTOspeed C9 Year of manufacture: 2008 Technical data - For sawing steel and non-ferrous metals - Test machine, used very little. - Cutting direction 90°. - Saw blade diameter 250, 285 and 315 mm. - Cutting range approximately 15-90 mm or 15x15-80x80. - Power of drive motor for saw unit 11 kW (special equipment). This enables cutting speeds of 50-700 m/min, among other things. - 2 separate and independently selectable tanks for minimal lubrication. Accessories: - Angle magazine, loading length 6000 mm. - Material trolley with drawbar. Dcodpfx Abjzuymkj Dsl - Portal crane, maximum load 1000 kg. - Oil mist extraction system. - Chip conveyor. - Chip tipping container with rollers. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Füller 4 Ventile motor für Vakuum Edelstahlausführung Dcsdpozx Drxjfx Ab Dol

Condition: used, Year of construction: 2014, Candle Filter System – Automatic, 3 Filters Dcsdpfx Aszx Dhmeb Djl 2x Filter housings 30" x 3 FBFM33 1x Candle filter FBT013GNW25J 1x Sepex pump 1x Pump for injection of oenological product after filtration or reinjection of wine 1x Mounted on skid, fully equipped with fixed piping

Condition: used, - Demonstration machine - Frame and work table made of stainless steel - Liquid circuit for continuous use up to 90⁰C - Filling head fully closed by security glasses, - Automated cycle start, automated tap removal, automated capping - Multifunctional coloured display, with touchscreen - Supply voltage: AC220V/50Hz±10% - complies with the Machinery Directive 2006/42/EC Video:  ?v=BDoyMhHtzIg [1] *Capacity depends on bag type* 3 l bag – approx. 400/420 per hour 5 l bag – approx. 345/370 per hour 10 l bag – approx. 260/295 per hour Dsdpfx Aszx Dacjb Docl 15 l bag – approx. 210/245 per hour 20 l bag – approx. 175/210 per hour [1] ?v=BDoyMhHtzIg

Condition: used, machine/vehicle number: SH01-332, motor defect. 5000 EUR afte repair Dcedpfx Abjzx A Ske Del

Condition: used, Year of construction: 2019, Semi- automatic labelling machine model S1/M – CONSOLE Dcedpszx Av Nofx Ab Del 230V, 50 Hz, Single phase Max approx 700 bph Console for labelling adjustment Paper web passage height H=150mm

Condition: used, Die halbautomatische Verschlussmaschine RLC1 ist für die Verpackung von Glasflaschen mit 26 oder 29mm Kronkorken geeignet. Die Schließeinheit kann auf Kronkorken von 26 oder 29mm Durchmesser verwendet werden. Wenn man beide Durchmesser braucht, wird eine zusätzliche Schließeinheit geliefert. Der Schließkopf der Kronkorken ist aus gehärtetem Stahl, und auch im Laufe der Zeit ist er verschleißfest. Die Schiene führt die Kronkorken in der richtign Position. Die spezifische Form der Schiene wird spezifisch für die Kronkorken aus Edelstahl 304 gebaut. Diese enthält eine kleine Menge Kronkorken, die manuell eingegeben werden können. Die Schließeinheit zieht die Kronkorken aus der Schiene heraus und steckt sie in den Schließkegel. Dcjdpfx Abozx Au Se Dol Auf Anfrage kann man einen Trichter einbauen, um eine größere Menge Kronkorken einzugeben. Den EG-Normen entsprechend startet der Verschlussprozess mit dem gleichzeitigen Drücken von zwei Tasten. Nach der Positionierung der Flasche auf den Halter, fängt der Verschlussprozess an, die Schließeinheit sinkt auf die Flasche und verschliesst der Kronkorken, automatisch kehrt die Schließeinheit zurück. Maße: L 0,41m H 1,96 m B 0,41 m Gewicht ca. 80kg Gewicht mit dem automatischen Trichter:140kg Max Durchmesser der Flasche 220 ​​mm nutzbare Höhe max 500 mm

Condition: used, Year of construction: 2004, total length: 21,000 mm, total height: 2,750 mm, total width: 2,550 mm, Colour: Blue Weight: 8.000 kg Price: On request - Details: - └ Description: Available by 05-2026 (depending on delivery of new machine) - Year: 2004 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 9076 - Main motor power: 15 - Control system: Windows 10 - Max. saw width: 450 - Max. saw height: 160 - Infeed table length: 8200 - Outfeed table length: 8900 - Max. infeed length: 8000 - Opstellengte [mm]: 23000 - Opstelbreedte [mm]: 5200 Djdpfx Aoyy Nnqsb Dscl - Opstelhoogte [mm]: 2700 - Veiligheidsvoorziening: Safety light curtain, Enclosed fence - Options: Waste conveyor belt, Label printer, Marking pen - Voltage [V]: 400 - Fuse [A]: 63 - Power [kW]: 15.0 - Transport dimensions: 21000mm x 2550mm x 2750mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels