Used Angle Press for sale (17,965)

Condition: used, Year of construction: 1979, pressure 100 t stroke 500 mm table surface area 4000x500 mm Psdpfx Aloy Tpr Asmopt weight of the machine ca. 5,7 t HY – S 100 RH MAE hydraulic straightening press, complete with straightening unit Year of manufacture: 1979 Approved in accordance with UVV Stroke: 500 mm Pressure capacity: 100 tonnes Table: 4000 x 500 mm Weight: 5700 kg

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Pedsy R Nnfjpfx Almjpt Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: used, workpiece height max. 2.320 x 1.010 mm output 33 kW Available 2 Stück Orma PM/AFT membrane press for coating single-sided profiled workpieces with automatic loading and unloading system Ppodjw Na Ulspfx Almot

Condition: used, 1x bending knife from a VOEST press brake Length: 4050 mm Weight: approx. 120 kg For further dimensions see pictures. Ppjdpoy Tbvmofx Almot

Condition: used, Year of construction: 1974, length 450 mm width 250 mm Ppedpfx Aloydqnxjmjt height 1.250 mm accuracy +/- 1 ° distance between tapping holes H: 130 mm distance between tapping holes V: 150 mm distance between tapping holes H: 70 mm distance between tapping holes V: 200 mm JOHANN FISCHER - Measuring Angle

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, power: 17 kW (23.11 HP), pressing force: 220 t, stroke length: 180 mm, throat depth: 420 mm, total width: 3,650 mm, total height: 2,900 mm, overall weight: 17,900 kg, Hydraulic press brake Manufacturer: AMADA, Type: HFB 220-30 H Year of manufacture: 1991 Technical data Manufacturer: AMADA Type: HFB 220-30 H Year of manufacture: 1991 Press force: 220 tons Bending length: 3100 mm Stroke: max. 180 mm Overhang: 420 mm Distance between side supports: 2750 mm Power: 17 kW Dimensions: L 3,65 m, W 1700 mm, H 2900 mm Weight: 12.9 t Equipment • Delem DA 58 2-D graphics control system • Controlled axes: Y1, Y2, X, R1, R2, Z • Large tool package, see photos • Amada quick-release tool clamping system Pedpfjy T R Ryox Almspt All information is provided without warranty. A live demonstration is possible at any time in our showroom.

Condition: used, Punching force: 200 kN Thread, for example a 13 mm hole in 12 mm steel Ppjdpfx Alormudgomjt Viewfinder via handwheel Assortment of tools is included in the price

Year of construction: 2010, condition: used, Double-acting hydraulic press Testing stand for shear tests on concrete specimens Pressing force: 2 x 1500 tons Pjdpfx Aley Urh Ajmjpt Equipment: - Includes corresponding hydraulic power unit - Measuring unit - Control cabinets Information: - Tare weight: 28,000 kg - Hydraulic power unit: 2,000 kg - Total weight: 30,000 kg - Additional price: excludes machine loading!!!

Condition: used, Year of construction: 2018, Technical specifications: Manufacturer: HAEGER Model: 618MSP-He Year of manufacture: 06/2018 Condition: good, used Connections: 3 phases, 50/60 Hz, 380/480 V, 3.7 A Short-circuit current: 5 kA Prospective short-circuit current: 5 kA Clamping force: 54 kN (6 US tons) Stroke: 458 mm (18 inches) Weight: approx. 1,400 kg Dimensions (L x W x H): 160 x 100 x 240 cm Hydraulic drive system with integrated oil filter Patented HAEGER safety system Fastener and workpiece counter Integrated TPS tool safety system Adjustable dwell time Podpfoy Uvh Tsx Almjpt Hydraulic cylinder stroke limitation possible Program memory Adjustable fixed stop (force or stroke-limited operation possible)

Condition: reconditioned (used), functionality: fully functional, overall weight: 500 kg, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 06/2027, Dough divider and molding machine TOP bread roll press Fortuna Automat A 3 H + with molding stop function Head cleaning towards the rear Dough divider head newly revised with stainless steel blade NEW Dough weight up to 2400g Ppsdpfx Aleygcw Romet robust technology Connection 400V, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm Used machine, overhauled Quality from a specialist company! Benefit from over 35 years of experience! Options: Stainless steel platform New molding plate Service package Maintenance contract Training and commissioning Delivery service We have a large selection of dough dividers in stock!

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 06/2027, type of input current: three-phase, Fortuna Automat A 3 E + Roll Divider Dough dividing and rounding machine Roll divider, top model Fortuna Automat, size 3+ Simple, robust technology Head cleaning system, electrically operated, moving towards the rear Dividing head with stainless steel blade Dough capacity up to 2400g Dough divider with 3 rounding plates Connection: 400V, 16A CEE plug Dimensions: 720 x 800 x 1510 mm (W x D x H) Used machine, cleaned Quality from a specialist company! Benefit from over 35 years of experience! Options: Platform or mobile frame Rounding plates Service package Maintenance contract E-box for increased safety Delivery service Instruction and commissioning Ppodpfx Aljw Tub Usmjt We have a large selection of dough dividers!

Condition: good (used), Year of construction: 2005, functionality: fully functional, pressing force: 50 t, stroke length: 215 mm, Hydraulic press brake Manufacturer: TRUMPF, Type: TrumaBend V500 Year of manufacture: 2005 Technical data Manufacturer: Trumpf Type: TrumaBend V500 Year of manufacture: 2005 Capacity: 50 t Working length: 1250 mm Stroke: 215 mm Distance between uprights: 1040 mm C-frame overhang: 420 mm Installation height: max. 385 mm Working speed: 10 mm/s Return stroke speed: 220 mm/s Voltage: 3 x 400V Rated current: 21.5 A Ppedpfxsy T Hx Tj Almst Connected power: 8.6 kVA Compressed air connection: 6 bar Dimensions: approx. L 2.00 x W 2.00 x H 2.40 m Weight: 4.9 t Equipment • Trumpf TASC 6000 control system • Pneumatic die shifting • Hydraulic tool clamping, top and bottom, Wila/Trumpf • Controlled axes: Y1, Y2, X, R, Z1, Z2 • Bend-Guard safety light curtain, front • Tool package: - Upper tool 202/K, straight, R1, H 120mm, L = 1,250mm, segmented - Lower tool EV/S W6/84°, L = 1,225mm, segmented - Lower tool EV005, W16/30°, L = 1,090mm, segmented - Lower tool V24/80°, L = 1,120mm, segmented All information is without guarantee. A live demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 441, functionality: fully functional, pressing force: 28 t, throat depth: 220 mm, overall weight: 3,600 kg, working width: 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Pressing force: 28 t Max. working width: 1,000 mm Column gap: 950 mm Throat depth: 220 mm Back gauge depth: 415 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,150 x 2,400 mm Weight: 3,600 kg Transport packages: 1 Power: 3.0 kW Ppedpfxsy Rxy Dj Almet EQUIPMENT CE marking Documentation

Condition: used, surface area 850x850x80 mm no. of flutes / Ppsdpfxoy S Dnio Almot groove width / mm weight of the machine ca. 870 kg LxWxD: 850x850x80 mm Weight: 870 kg

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 06/2027, total length: 700 mm, total width: 600 mm, total height: 1,520 mm, type of input current: three-phase, power: 1 kW (1.36 HP), electrical fuse: 10 A, Semi-automatic dough divider and rounding machine, bun press for burger buns, pita bread, burek, flatbread, etc. NEW +++ Divobun 4-14 +++ NEW proven technology … already widely used! Stainless steel knives with an easy-to-clean setting! with 3 rounding plates Dough portion range: 130 to 400 grams/piece TOP dough divider Machine is mobile DGUV V3 certified, only available from us Connection: 400V, 16A-CEE plug Dimensions: 600 x 700 x 1520/2200 mm (W x D x H) New machine 2-year warranty + spare parts service Optional: Leasing & rental service Maintenance contract Service package Stainless steel machine platform Delivery service Ppsdpfxerkzgwo Almet Additional rounding plates Instruction and commissioning Other TOP dough dividers in stock!

Condition: good (used), Year of construction: 2011, Used 3.6 meter CNC press brake from Haco Ppjdey N Uadjpfx Almjt Type: ERMS 36220 Capacity: 3600 x 220 tons FastBend 2D CNC control Y1, Y2, X, and R axes CNC controlled CNC crowning Akas Fiessler laser safety Year of manufacture: 2011 1 set of complete tooling for 1 to 6 mm

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 4,500 h, Hydraulic press brake Manufacturer: TRUMPF, Type: TruBend 3066 B26 Year of manufacture: 2017 Like new, only 4,500 operating hours! Technical data Manufacturer: TRUMPF Type: TruBend 3066 (B26) Year of manufacture: 2017 Bending length: 2040 mm Press force: 66 t Operating hours: 4,500 h (metered) Free clearance between uprights: 2364 mm Reach: 400 mm Stroke: 200 mm Y-axis rapid traverse speed: max. 200 mm/s Y-axis working speed: max. 15 mm/s Drive power: 17 kW Dimensions: L 2.60 x W 1.65 x H 2.40 m Weight: 5650 kg Equipment - Electro-hydraulic upper drive - Block hydraulics - Controlled axes: Y1, Y2, X, R - 3 backstops Ppodoy Txdbopfx Almst - TRUMPF upper and lower tool clamping system - Self-adjusting crowning system - Control: Delem T3500T Multi-Touchscreen 17" - Light curtain front BendGuard - Integrated TRUMPF technology data - Foot switch - Technical documentation - Tool package consists of: - Upper tool Trumpf OW201K, slightly bent, 86°, L = 1,250 mm, segmented - Bent upper tool, H 120 mm, R1/86°, L = 1,950 mm, segmented - Lower tool EV042, V10, L = 1,250 mm, segmented - Lower tool V24, 80°, L = 2,000 mm - plus various short tools All information without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: used, Year of construction: 2010, total width: 2,080 mm, total height: 1,900 mm, total length: 2,440 mm, Colour: Grey Briquette press; Höcker Polytechnik BrikStar C 3-19-L 4.3kW, 400V 25kg/h Funnel volume 3m³ Oil tank 50l Dimensions; 2015x2360x1300mm, 830kg - Year: 2010 - Documentation available: Yes - CE certificate present: No - Transport dimensions: 2440mm x 2080mm x 1900mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ppsdjxqdxcopfx Almot Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2012, total width: 1,700 mm, total height: 1,500 mm, total length: 1,200 mm, Colour: Grey Empty weight: 500 kg Price: On request - Details: - └ Description: Set consisting of briquette press with extraction - Year: 2012 - Documentation available: No - CE certificate present: No - Serial number: 2012 1140 - Transport dimensions: 1200mm x 1700mm x 1500mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Pjdpfxjyy Rt Ue Almopt Yorick Diebels

Condition: used, Year of construction: 2017, operating hours: 854 h, total width: 2,450 mm, total height: 1,100 mm, total length: 1,900 mm, Colour: Grey Empty weight: 800 kg Price: On request - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 5037411-000150 - Operating hours: 854 - Transport dimensions: 1900mm x 2450mm x 1100mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ppedpfx Aljxan Utomjt Yorick Diebels

Condition: used, Year of construction: 1986, total length: 1,500 mm, total width: 1,450 mm, total height: 2,900 mm, Colour: Grey Empty weight: 5.500 kg Price: On request - Year: 1986 - Documentation available: Yes - CE certificate present: No - Serial number: 88 09-86 - Drive system: Conventional - Press force [ton]: 63 - Min. stroke [mm]: 10 - Max. stroke [mm]: 100 - Table length [mm]: 710 - Table width [mm]: 480 - Ram width [mm]: 320 - Height adjustment [mm]: 80 - Transport dimensions: 1500mm x 1450mm x 2900mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ppjdpfx Aleylb Edomjt Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1981, total length: 3,200 mm, total width: 1,500 mm, total height: 2,100 mm, Colour: Green Weight: 6.000 kg - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: - Drive system: Conventional - Power [kW]: 11.0 - Press force [ton]: 100 - Max. working width [mm]: 3100 - Column gap [mm]: 2700 Psdpfxsy Rrdce Almept - Backgauge depth [mm]: 700 - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 3200mm x 1500mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1991, Colour: Grey High frequency press Brand: Italpresse Type: GB/13 Max pressure: 120T Pressing area 2500x1300mm Pressing height 200mm Pedpfx Aswng Tmelmept 6 cylinders diameter 90mm Speed 12m/min. Complete line with loading system, gluing machine, destacker and High frequency cabinet (separate for sale) Machine needs some maintenance. Probably the PLC lost his parameters, and some small parts needs to be changed.  - Details: - └ Description: Exclusive High-frequency cabinet - Year: 1991 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, total length: 3,950 mm, total width: 1,500 mm, total height: 2,150 mm, Colour: Green Empty weight: 4.000 kg - Documentation available: No - CE certificate present: No - Serial number: 19198 - Main motor power [kW]: 1.1 - Press drive: Hydraulic - Max. workpiece length [mm]: 3100 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 390 - Total stroke [mm]: 390 - Number of work zones [pcs]: 3 - Number of levels [pcs]: 3 Ppodpoy Rq Efjfx Almjt - Plate material: Wood - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 80 - Total pressure [Ton]: 160 - Options: Disable partial cylinders - Voltage [V]: 400 - Fuse [A]: 16 - Power [kW]: 1.1 - Transport dimensions: 3950mm x 1500mm x 2150mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2011, input voltage: 230 V, Pneumatic corner clamp. Ppodpfx Aey Twnxelmot Knives for Reynaers systems, included.