Used Asys Stm 03D for sale (577)

Condition: good (used), Franz Haas Wafer Stick Baking Oven, Model EWB 1/1, completely refurbished. The machine is constructed from ASIS 304 stainless steel (with the main frame made of carbon steel). The oven is equipped with a rotating ring, which has adjustable speed control to achieve the desired baking characteristics for the wafer sticks. The ring has been cleaned and checked (re-aligned), and the supports/bearings are brand new. Fans have been replaced with new units. The exhaust outlet and flange have been replaced for quick installation. The machine comes with two extruders with bushings for ribbon forming and tube diameter shaping. Equipped with a cutting knife featuring a pneumatic actuator and photoelectric sensor for precise cutting (tube length adjustment is possible). The oven includes a stainless steel batter tank mounted on a frame with a trolley. Fitted with pumps that feed batter from the tank onto the ring surface. Comes with a new control panel and a new gas pressure regulator. Speeds of the ring and pumps are adjustable via frequency inverters. Fjdpfxsywgaxj Aggsgg Dimensions: length 3200 mm, width 1400 mm, height 1700 mm. The machine is powered by natural gas, high-methane type, symbol E (previously GZ 50). Electrical requirements: 3x400V / 16A, consumption approx. 2.5/3 kWh. The machine has undergone a complete overhaul. All thermal elements have been replaced with new, environmentally-friendly components—resulting in lower gas consumption and enhanced efficiency. Output: approx. 120-150 kg per 8 hours.

Condition: new, Year of construction: 2025, machine/vehicle number: 988906827, Fully mobile ready-mix concrete plant Frumecar Fastmix *THE READY-MIX CONCRETE PLANT* - Year of manufacture: New - 2-4 chambers with a capacity of 7-14 m³ - Capacity: 14-25 m³/h depending on the mixer size - Mixer size: 0.5 m³ - 0.75 m³ - 1.0 m³ - Concrete software from Siemens with self-service terminal, new barcode system, and EC card terminal - Concrete discharge conveyor 9m long - Cement silo 32 tons, including cement screw conveyor - Assembly, commissioning, and training included - 2-year warranty - The highest quality plant on the market. All components are produced in Europe. Siemens electric motors and gearboxes are installed. Other plant components are from the market leader, VAM. Typographical errors and errors in this offer are expressly reserved. Fgjdpfx Agjhd I Smegsg Only the specific agreements in the order confirmation or the purchase contract are binding. More construction machinery and mixing plants on our website. Further information: Intended use: Construction, Usable material: Concrete, General condition: very good, Technical condition: very good, Optical condition: very good.

Condition: excellent (used), functionality: fully functional, 1 used Möhringer log feeder STM2 4-strand with hydraulic unit and control cabinet Total length: approx. 5.60 m Strands: 2.50 - 1.60 - 1.50 m connected load: 15.5 kW Fgjdpjr Ddinjfx Aggog dismantled, inspection possible at any time

Condition: like new (used), we are interessted in buying obsolete electronic components, semi conductors microprocessors, etc Fgjdoizi Twjpfx Aggjg

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 305 mm, warranty duration: 24 months, power: 30 kW (40.79 HP), OMAX MAXIEM 2040 3D, 30 kW MAXIEM Pump and A-JET Tilting Cutting Head Factory-refurbished with manufacturer certification and a two-year warranty. The waterjet cutting system configuration is freely selectable. Feel free to contact us and let us know your desired configuration. Customers searching for efficient and cost-effective waterjet cutting systems will find their ideal solution in the Modular Line MAXIEM. These powerful MAXIEM systems combine operational flexibility and affordability, and can be expanded with a broad range of accessories to suit your specific cutting needs. With the modular MAXIEM line, OMAX delivers advanced, reliable waterjet cutting technology at an economical entry price, thereby opening up the advantages of this technology to a wide array of application areas. Leasing with highly attractive terms is available on request, for example, for up to 86 months. Fgedpfxerm Ilfs Aggog - Accuracy up to ±0.05 mm - Software and machine components based on the latest OMAX standards With the 3D A-JET cutting head, the MAXIEM achieves cutting precision of under 0.1 mm. The 3D head enables bevel cuts up to 60° and compensates for cutting angle errors. The machine is currently being factory-refurbished; the images are thus similar to the actual offering. Prompt delivery can be arranged with INNOMAX AG.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 902 S Hidrolik Alüminyum Köşe Presi Makinesi, • Complies with CE standards • Corner press machine designed for joining aluminium profiles at 90 degrees • 2 upper presses and blade movement are hydraulic • Equipped with a mm scale system for adjusting blade height and feed • Centering square stop is hydraulic • Drain button for fine adjustment is available • Machine comes with 2 pieces of 4 mm blades • 2 pedals are used for hydraulic pressing and profile clamping • Polyamide plate is provided to prevent damage to profile surfaces Fodpfxsrbk Tfs Aggjgg • Left and right profile support arms are available

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 1000 DİJİTAL METRE, • 3 metre length • +/- 0.1 mm measuring accuracy • Servo motor (optional) • Decimal operation option (especially for aluminium) Fgjderblaljpfx Aggjg • Bluetooth measurement option (please ask for details) • 220 Volt voltage • Touch screen • Backstop retraction with a single button for easy removal of the cut product from the mould • User-friendly design • Easy calibration

Year of construction: 1994, condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: GME, transformer from press brake HACO PPES 30135 -Type: STMU -Technical data: see photo nameplate Fsdpfergbvrjx Aggegg -Dimensions: 150/100/H235 mm -Weight: 9.6 kg

Condition: new, empty load weight: 1,300 kg, maximum load weight: 950 kg, loading space length: 3,010 mm, loading space width: 1,530 mm, loading space height: 350 mm, tire size: 165R13C, Car trailer braked and with 100km/h from trailer manufacturer STEMA type SyStema ST O2 13-30-15.1. The open box trailer is ideal for private transportation or commercial use. Garden waste, small furniture and motorcycle transport for up to 3 motorcycles is possible thanks to the removable side walls. Fgedpforx S Dpsx Aggog As standard equipment, the steel trailer has a 100 km/h approval, front and rear flap, support wheel, eight lashing eyes, high-quality locks, removable galvalum galvanized drop sides and a V-drawbar. The complete equipment list and technical details can be found below. This trailer is also available in different versions, for example as a tarpaulin trailer. We also offer car trailer accessories such as attachments, high tarpaulin, flat tarpaulin, drawbar box and rear supports, ramp rail, stand rail, motorcycle rocker, motorcycle lashing straps, lashing straps.

Condition: good (used), Spray booth water stabilizer Technical data: Agitator Fgedpfx Aeiu Hwuoggsg Pump Filling spout Ø 9 cm Thermostat display Level indicator Ø 176cm H: 67 Thickness 3mm More articles - new and used - you will find in our store! International shipping costs on request!

Condition: used, Basic - feed-in unit, feed-in module, converter, frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Baumüller, basic feed-in unit -Type: BUG622-28-54-E-000 -Number: 4x module available Fgsdeb N E Haspfx Aggsg -Price: per piece -Dimensions: 300/100/H380 mm -Weight: 14 kg/piece

Condition: used, Cleaning container -Large: cleaning container -Interior dimensions: see photos -Performance levels: 5 -Price: per piece Fsdpod Skkyofx Aggegg -Number: 2 pieces -Dimensions: 595/380/H660 mm -Weight: 38 kg

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor -Square D basic module: PD 3.01 E -Class: 8502 -Price: per piece -Quantity: 17 pieces Fgodsd Spi Ropfx Aggjg -Dimensions: 88/49/H75 mm -Weight: 0.4 kg/piece

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 400 S Aluminyum Pvc Çift Kafa Kesim Makinası, • Complies with CE standards. • Cutting accuracy +/- 0.1 millimeter • Automatic adjustment to two angles: 90° and 45°. • Automatic slicing at two angles: 90° and 45°. • Touchscreen color panel display • Remote connection and technical support capability • 2 x 500 mm saw blades • With Ø500 mm saw blades, max 16.5 cm cutting depth and ability to cut 2 x 80 mm profiles • Adjustable saw speed • 6-meter cutting capacity • Block cutting feature • Unlimited language support • Unlimited measurement memory capacity • Conveyor right/left profile support unit • Profile support unit between cutting heads • Spray saw cooling system • 2 vertical clamps • 4 horizontal clamps Fjdpjramvaefx Aggsgg • Air gun OPTIONS • Barcode printer • Cutting list transfer via USB memory stick • Hydro-pneumatic, hydro-check controlled saw movement

Year of construction: 2005, condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: STM, geared motor type RMI 50 D -Speed speeds: approx. 14 rpm i= 1/100 -Manufacturer engine: TeKell type M63B4 Fgodpfx Aspbig Hsggog -Power: 0.187 kW / 1390 rpm -Shaft: Ø 24 x 90 mm -Dimensions: 210/215/H345 mm -Weight: 10 kg

Condition: ready for operation (used), Heidenhain ERN 120 5000 01-03 rotary encoder: 589 611-3C, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fgedsi Eah Hepfx Aggsg

Condition: ready for operation (used), Indramat 2AD180D-B350A1-BS03-D2N1 Asynchronous main drive motor SN: 512 / terminal board defective, used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Fgodpfoudghlsx Aggeg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1170x560x570 mm Weight 55 kg Fgjdpfxevz Elco Aggeg Total power requirement 2,2 kw

Year of construction: 2020, condition: new, Hopper Dryer FASI CHD-50T, d=430, H. 1140mm, 50kg, 3.9kW, NEW Fsdpfjv Nkcvjx Aggsgg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 100372005, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 465 mm, feed length X-axis: 40,000 mm, feed length Y-axis: 40,000 mm, feed length Z-axis: 40,000 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, mount diameter: 63 mm, total length: 5,350 mm, table length: 500 mm, table width: 450 mm, total width: 5,116 mm, spindle speed (max.): 16,000 rpm, total height: 3,082 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, type of input current: three-phase, table load: 250 kg, position of the milling head: Horizontal / Swiveling, workpiece weight (max.): 250 kg, torque: 63 Nm, rotational speed (max.): 16,000 rpm, overall weight: 16,000 kg, working range: 500 mm, tool weight: 6 g, input voltage: 400 V, input frequency: 50 Hz, input current: 90 A, workpiece length (max.): 700 mm, workpiece width (max.): 400 mm, number of slots in tool magazine: 24, Equipment: documentation/manual, rotational speed infinitely variable, Zero hours HAMUEL HSTM 500 HD 5-Axis Turn-Milling Center Was not used in production / just commissioning (by OEM) and preserved. Comes as complete shipset from MFG. - X, Y, Z axis with absolute linear scale - A axis - Swivel axis / B axis - C axis Fgedpfxszvulke Aggsg - Pressure control of head clamping - CNC-control system SIEMENS 840D SL - Remote diagnosis system via Ethernet - Patrol light - Control cabinet with air-condition - Milling spindle 16’000 rpm, HSK-A63 - Machining hour counter - Tool handling system with double gripper - Chill unit - Hydraulic unit - Machine housing with front door L shape - Standard machine color scheme - Coolant supply unit, low pressure, paper belt filter - Flush Gun - Chip conveyor - Oil Mist exhaust system - Documentation 1-fold in English + CD Machine option package: High pressure cooling through spindle BEMA automatically adjustable nozzles Tool measuring system BLUM Work piece measuring system BLUM Rotoclear window Handweel HT2 VNCK Siemens simulation Available in Bangkok, Thailand Worldwide shipping

Condition: used, Year of construction: 2008, functionality: limited functionality, power: 150 kW (203.94 HP), nominal heat output: 250 kW (339.91 HP), heating capacity: 220 kW (299.12 HP), Fixed-bed wood gasification plant from Urbas. The system is operational. Scope includes engine and generator. The engine requires an overhaul. Also included is a valid EEG feed-in contract at 21.6 cents/kWh until 2028. A comprehensive stock of spare parts, such as side channel blowers, sensors, and pumps, is included. A second unit is provided as a parts donor. Fgodjyyzv Tepfx Aggeg

Condition: used, Used Wolfking TSMG 1500/250 stainless steel ASI 304 / 1.4301 horizontal twin paddle mixer total capacity 1 500 ltr. Mixing chamber measures approx. 1 500 mm length x 1 600 mm width. Total lenght of mixer is 3 200 mm. Total height of mixer is 2 200 mm. There is two horizontal twin paddle agitators in the mixing chamber. Agitators speed is 20 PRM driven by two el. motors 7,5 kW. One side discharge with screw installed in the bottom of chamber driven by el. motor 55 kw, 160 PRM. Included: control panel, switchboard Fedpfozn N H Tsx Aggsgg

Condition: used, Siemens SIMATIC Panel PC 6AV7881-3AF00-3DT0 Industrial PC HMI Touch Panel Fedpfxszxq T Aj Aggjgg Quantity: 2 units available Manufacturer: Siemens Article number: 6AV7881-3AF00-3DT0 Product type: Industrial Panel PC / HMI Design: Panel PC with touch display Application area: Industrial automation / Machine operation Condition: used

Condition: used, Bottling line for rinsing, filling, capping bottles + labeling. Fgodjzymzfepfx Aggog 1. Filling unit: Manufacturer: VIR MAURI (ITALY) Type: 9/24/1 Filler capacity: 3,000 - 4,000 bottles per hour (bph) Year of manufacture: 1992 / major overhaul: 2005 Current format: PET bottle, diameter 57 mm, height: 170 mm, cap 28 mm / PCO 1881 Capping machine: AROL - BETA PF1 2. Labeling machine: Manufacturer: KRONES Model: CANMATIC Paper labels with hot-melt adhesive Two gluing stations – one applies adhesive to the bottle, the other to the label Capacity: max. 12,000 bph Year of manufacture: 1985 / major overhaul: 2005 (by STM) Machines are regularly serviced and were in working order at the time of dismantling. Requires inspection before starting production. Includes conveyor belts as shown in the pictures.

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Fgsdoixxwmjpfx Aggsg Position 6= Group for slat recovery 2500 mm entry level Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott