Used Automatic Edge Banding Machine For End Trimming for sale (78,407)

Condition: as good as new (ex-display), Year of construction: 2024, Contour edge banding machine for hot melt glue application to 0.4 - 3.0 mm edge material →Direct glue application to edging material: Bottom infeed of glue granules resulting in spill proof glue pot. Quick heating-up time after machine omatic start of application roller after approx. 8-10 mins. →Pressure roller driven by gearmotor infinitely adjustable between 0-15 m/min. →Automatic edging feed-in and automatic cut-off operation for straight and curved workpieces via footpedal →Pneumatic cutt-off unit capacity max. 3 x 30 mm Lodpfxod Sb Dts Amneaa →Turntable D=600mm 67641341015f6

Condition: used, Year of construction: 1997, - edge banding unit - Cross-cutting unit Laodpfxod Inkts Amnea - Milling unit - Fine trimming unit - scraper - buffing unit

Condition: excellent (used), Year of construction: 2017, I sell the fully equipped edge banding machine BRANDT KDF 230 AirTec, year 2017: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible / AirTec unit Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Working thickness adjustment manually Material height 8-60mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 5070mm Laedpfx Ajythxmemnja Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm Lsdpfx Amjwka S Isnsaa - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Smart Touch Numerical Control with Sintra HD Software Panel height mm 10 – 60 Solid mm 22 Pvc/Abs mm 3 Feed speed up to mt/min 25 Working height electronically adjustable by N.C. Motorized and electronically adjustable panel support guide by N.C. Anti-adhesive group Rectifying group with 2 motors electronically adjustable by N.C. Reel holder plate with n° 1 position Lodpfxjwlbxlo Amnsaa Gluing group for EVA hot melt glue with glue pot End trimming group with 2 motors with dynamic suction system that follows the blades in each of its movements. Staggered trimming/cornering unit with 2 motors electronically adjustable by C.N Anti-stick unit Rounding unit with 2 multifunction motors (cornering unit + rounding unit) Electronic edge scraping unit electronically adjustable by C.N Glue scraping unit Brush unit “SP-501” Automatic piece return system with Winner 4A bridge unloading

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 Features and technical data: At 5,500 mm in length, the Quadromat is the shortest edge banding machine that enables complete processing of edge materials with an integrated workpiece return system. Not only are the longitudinal edges trimmed within the machine, but the end edges are also copied, thus completing the processing cycle. The finished workpiece is returned to the operator, eliminating the need for manual reworking. - With PLC control system supporting up to 20 processing programs Workpiece dimensions: - Minimum width: 60-80 mm (depending on edge material) - Minimum length: 150 mm - Workpiece thickness: 10 - 50 mm - Edging thickness: 0.4 - 12 mm Laodpfx Amswkba Tjnoa - Minimum edging length: 400 mm Feed rate: 18 m/min Equipped with: - 2 jointing milling motors - Multi-functional milling unit (flush trimming, chamfer, radius) - Scraper - Cross-cut saw - 2 glue pots (for transparent and white glue) and 1 spare pot Compressed air connection: 7-10 bar Extraction connection: 160 mm Weight: approx. 2,400 kg Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 1998, Used machine Lajdsw Tfw Hopfx Amnoa Year of manufacture: 1998 Proven quick heating tank; heating time approx. 5 minutes. Safety interlock for the application roller; the roller engages only after reaching operating temperature. Centrally height-adjustable upper pressure bar. Edge feeding and roll separation pneumatically controlled. Connected load: approx. 11.5 kW, heating power 4.5 kW, frequency inverter 300 Hz, 4 kVA. HF crosscut saw unit: electrically and pneumatically controlled, motor power 0.37 kW. Saw blade diameter: 100 mm HF flush milling unit: for radius, straight and chamfer milling. Crosscutting from rolls up to 3 mm. Edgebanding and crosscutting up to 5 mm. Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: Chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at front. Digital position display for feed height adjustment, edge thickness, and milling. With chassis. With heated infeed ruler. Compressed air connection: 6 bar Central extraction port: 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short notice Storage location: Flörsheim

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application on straight workpieces (EVA/PUR glue pot with emptying function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller upper pressure, extendable workpiece support rail, signal lamp for workpiece tracking and integrated length control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer edging coils, as well as fixed lengths from 0.4–3.0 / 6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. ● 3 free slots for finishing units ● 10" color touch screen. Machine length: 4030 mm Workpiece thickness: 8–60 mm Min. workpiece width: approx. 75 mm Min. workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4–3.0 mm Pre-milling unit chip removal: 0–2.0 mm, stepless adjustment Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1050 kg Options: Ljdpfxsw I U Drs Amneaa Surcharge for radius scraper unit with air nozzle + extraction Surcharge for surface scraper unit + extraction Surcharge for buffing unit EVA/PUR glue pot with emptying function Surcharge for diamond tools, height = 65 mm for pre-milling unit Riepe spray system (anti-adhesive) at the pre-milling unit Riepe spray system (cleaning spray before buffing unit) Pipe system with 90° bend + manual slide valve, installed on machine, D=200 mm Availability: short-term Location: Hochheim

Condition: used, Year of construction: 2004, Used machine Year of manufacture: 2004 Equipment and technical data: Edge feed for rolls and strips Joining milling unit with 2 milling heads Adhesive application system cartridge 3-roll printing unit Cross-cut saw unit Radius milling unit Radius scraper unit Corner copying unit Surface scraper Buffing unit Workpiece thickness min./max.: 6/50 mm Edging thickness: 0.4-15 mm Edging height max.: 55 mm Edging length strip min.: 350 mm Ledpovymdqefx Amnjaa Edging projection per side max.: 3 mm Workpiece width min.: 60 mm Workpiece length min.: 180 mm Feed speed: 12.5 m/min. Machine dimensions L x W x H 6480 x 1250 x 1690 mm Availability: short term Storage location: Flörsheim

Condition: new, Year of construction: 2024, New machine Lsdpfew I U Rfsx Amnsaa Year of manufacture: 2024 Specifications and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Extension for extendable outrigger Standard infeed fence 3 LED lights in the infeed area Jointing unit with two motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edge feeding system 1903, fully automatic GluJet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Pressure unit 1912-3, pneumatic Spray device GM 201 after pressure unit End trimming unit 1918, pneumatic Extraction hoods for end trimming unit Combined trimming unit FR201 with DIA cutters R=2 mm Contour trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Spray device front and rear TR201 Buffing unit 1940 Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 for pre-coated edge material Edge material up to 1.3 mm Lodpfxjxc Rl He Amneaa with roller guillotining with flush trimming with knife with top/bottom flush and bevel milling with HF motors Location: Röllbach Availability: short term

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Lodpfx Asv A E Iyemnoaa Weight 8 kg Total power requirement 0,9 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1820x585x1450 mm Weight 500 kg Total power requirement 4 kw Lajdpfxjvz Hd Hs Amnoa

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2650x640x1400 mm Laedpsvz E T Hofx Amnea Weight 700 kg Total power requirement 5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4200x1500x1500 mm Lasdovz E Tmopfx Amnsa Weight 1050 kg Total power requirement 8 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3810x575x1520 mm Lodpfx Asvz E Scsmnoaa Weight 1000 kg Total power requirement 8 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1050x830x1100 mm Weight 133 kg Total power requirement 2,1 kw Laodpfx Asvz E Hmsmnja

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3200x780x1500 mm Weight 800 kg Lasdovz E Evjpfx Amnea Total power requirement 8 kw

Condition: used, Year of construction: 2006, IMA Novimat edge banding machine: Manufacturer: IMA Type: Novimat Concept/I/G/80/650/R3 Year of construction: 2006 Machine no.: 08113 Rated power: 41 kW Workpiece feed: Sliding chain Stop fence: Adjustable stop fence 700.080 Slide-in table: 63.152 Milling unit: 08.378 Glue level monitoring: Available Glue application unit: 04.0832 Gluing unit: 04.1570 PU premelter: 283.203 HK tool holder: For high-speed motors Snipping unit: 08.42 Trimming unit: 08.0555 Multiple processing unit: 08.348 Multiple profile scraper unit: 08.516 Flat scraper: 08.517 Copy corner buffing unit: 08.604 Buffing unit: 08.617-4 Safety devices: Light barriers, temperature controller, control terminal Additional equipment: Roller conveyor table in front Total machine length: Approx. 11 /16 m Suction device: Included Accessories: Edge magazines: 2 sliding magazines for gluing edges, each for 12 rolls, mobile Plasma edge heating (PLASMATREAT Düstec): 2 plasma devices Switch cabinet Panel return system (manufacturer: VENJAKOB): Components: 7 belt conveyor tables, belt width approx. 100 cm, different table lengths Lodpfornkw Dsx Amnjaa Round belt conveyor table Switch cabinet system 2 angular transfer tables Peripheral stations for edge processing line: Consisting of: Interface system Barcode scanning system

Condition: like new (used), Year of construction: 2013, IMA COMBIMA 2013 - 2x loading / unloading station - for PVC, ABS & solid wood edges Lsdpfx Ajtxtkxemnoaa - U-form layout - with KFA 20 aggregate - immediately available For more Info, Video and technical specs, please contact us.

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control system with LCD display - Swiveling operator panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutters for up-cut and down-cut operation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensor-controlled nozzle - Automatic reloading - Use of PUR adhesives possible Pressure unit 1816: - With powered roller - Pneumatic control of the pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivels from 0 to 10°, pneumatically adjustable Milling unit 1942 MOT 2: - For flush, radius, and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Process-controlled surface scraper - Air nozzle at surface scraper Buffing unit 1940 Edge thickness, coil material: 3 mm Edge thickness, strip material: 5 mm Max. edge thickness, corner copying: 3 mm Workpiece thickness: 6-45 mm Ljdpfx Amewka Nysnsaa Workpiece thickness, corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8 m/min Distance, workpiece support: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heating up time: 3.5 min Jointing cutter power: 2 x 2 kW End saw power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle jointing unit: 120 mm Extraction nozzle milling unit: 70 mm Extraction nozzle scraper unit: 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Condition: used, Year of construction: 2007, machine/vehicle number: 3750, functionality: fully functional, Machine glues solid wood up to 18.0mm and roll goods up to 3.0mm Cutting from the roll 3.0mm thick PVC, ABS, and real wood up to 2.0mm Flush chamfering 18mm Rounding and chamfer milling stations Total length 3.20m Power consumption 7.1 kW Glue container Cutting shears Laodpoigad Eefx Amnoa Infinitely variable feed Cutting saw for front and rear edge Flush milling unit Rounding milling unit Chassis Extraction connection 100 mm

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 558/0-112, functionality: fully functional, Weight approx. 1950 kg control panel 1888 Pre-milling unit 1961 edge feeding unit 1901 Ledpfxsh Uyg Es Amneaa tracer nozzle printing unit 1913 MOT cross-cut unit 1918 Milling unit 1942 top Milling unit 1942 top/bottom for round milling scraper 1929 Form milling unit 1983 Surface scraper 1964 Buffing unit 1944 length approx. 5900 mm Connected load 21.4 A

Year of construction: 1995, condition: not inspected (used), Connected load 380V 55A PMS control Pre-milling unit 1961 Magazine 1901 Glue station 1906 Printing unit 1926K Snipping unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm rounding up to 15 mm flush Rounding scraper 1927 Shaping trimming unit 1983 Ljdenxkm Eepfx Amnsaa Buffing unit 1941 Extraction 1x160 1x125 mm Compressed air connection 6 bar

Condition: reconditioned (used), Year of construction: 1993, machine/vehicle number: 869/9-302, functionality: fully functional, Connected load 380V 21A Lajdpfsiamufex Amnoa Edge magazine gluing station 1906 printing unit 1914 Crosscut saw unit 1976 Milling unit rounding 1943 Rounding scraper 1927 Buffing unit 1944 Control panel top Suction nozzle D=100 mm operating instructions no exchange unit for flush milling