Used Autonox Rl3-Ts1-1200-20Kg for sale (4,738)

Condition: good (used), Year of construction: 2006, clamping force: 800 kN, Total connected load 21.7 kW Pump motor 18.50 kW Weight 7,400 kg Ncsdpfx Aeyux Uhsdtjr

Condition: used, Pressure total: 1200 ton Ram stroke: 600 mm Slide adjustment: 500 mm Shut height (stroke down, adjustment up): 1250 mm Free frontal opening L-R: 3550 mm Table surface area : 3500 x 2700 mm Njdpfx Adoyw R Adstocr Slide area: 3500 x 2700 mm Die cushion capacity in table: 240 ton Die cushion stroke: 250 mm Ejector in ram: 95 ton Ejector stroke in ram: 150 Number of strokes: 10 - 16 s.p.m. Height over floor approx.: 9000 mm Weight of machine approx.: 280 ton Standard configuration Pin distance 150 mmPin Diameter 50 mm

Condition: used, Pressure total: 1200 ton Ram stroke: 600 mm Slide adjustment: 600 mm Shut height (stroke down, adjustment up): 1600 mm Free frontal opening L-R: 4550 mm Table surface area : 4500 x 2700 mm Slide area: 4500 x 2700 mm Die cushion capacity in table: 225 ton Die cushion stroke: 200 mm Number of strokes: 9 s.p.m. Height over floor approx.: 9000 mm Weight of machine approx.: 344 ton Standard configuration Pin distance 150 mmPin Diameter 50 mm Nodpfx Asyw Rvqodtecr

Condition: used, machine/vehicle number: 14065, Rotor diameter: 457 mm Rotor width: 1200 mm Rotor knives: 81 Stator knives: 1 row Ncedpfxoyvlv Nj Adter Infeed opening approx. 1600 x 1200 mm Drive motor: 55 kW

Condition: new, table length 1200 mm table width 800 mm Nsdpfeyv I Insx Adtecr table height 980 mm weight of the machine ca. 0.95 t Workstation - Hole diameter: 28 mm - Grid: 100 x 100 mm - Side panels: 150 mm - Panel thickness: 10 mm

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,510 mm, travel distance Z-axis: 650 mm, workpiece weight (max.): 7,500 kg, total height: 3,900 mm, total width: 2,950 mm, total length: 3,430 mm, Equipment: documentation/manual, For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. Ncjdpfovwa Nbex Adtsr The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered. For sale: OPS Ingersoll Gantry 1200 EDM machine, built in 2004, with a general overhaul in 2016. The machine was running flawlessly until recently and is in very good condition. An on-site inspection is possible, but please note that the machine is currently not powered.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Holtec Bruks long log intake system with root reducer, consisting of: Cross infeed conveyor with 6 chain strands, split drive. Holtec hydraulic step feeder with split drive. Bruks root reducer type RR 1200 for long logs – milling length 1200 mm. Holtec heavy-duty conveyor belt for round timber. Nsdewxck Ajpfx Adtscr Scraper conveyor for waste removal and distributor auger.

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on solid base frame -Clamping surface: 2000 x 1200 mm Nedpjxm R S Ujfx Adtecr -Table height: 735 mm -Plate thickness: 125 mm -Transport dimensions: 2000/1400/H735 mm -Weight: 2220 kg

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 2124, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,375 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 4,000 rpm, 5-axis machine Pallet size: 800 × 800 mm Nedpfx Adeyzxyxotecr Automatic workpiece change: 5 pallets CNC control: FANUC 15M Spindle: 22 kW – 4000 rpm, FANUC Axis motor (20 m/min) + drive: FANUC Tool magazine: 118 tools, type 50, DIN 69871

Condition: used, mileage: 856,209 km, power: 430 kW (584.64 HP), first registration: 04/2015, fuel type: diesel, empty load weight: 11,900 kg, maximum load weight: 6,100 kg, overall weight: 40,000 kg, tire size: 385 / 55 R 22.5 / 8mm, axle configuration: 4x2, next inspection (TÜV): 05/2025, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, total width: 25,500 mm, front tire size: 385 / 55 R 22.5 / 8mm, operation weight: 18,000 kg, Equipment: air conditioning,

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 650 mm, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 1,770 mm, workpiece width (max.): 1,270 mm, workpiece height (max.): 680 mm, feed rate Z-axis: 12 m/min, table load: 7,500 kg, Status: completely overhauled Control: Mitsubishi - 64 bit CNC Generator power: 70 amps - multipulse Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-way pick-up plate changer Work container (W x D x H): 1770 x 1270 x 680 mm Workpiece clamping table (W x D): 1640 x 1140 mm Njdpfx Ajyrqn Iedtjcr Load capacity: 7,500 kg Accessories: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Condition: good (used), color: grey, lifting height: 27,000 mm, Year of construction: 2017, operating hours: 1,849 h, CE mark: yes Njdpfx Adsk Aaafjtjcr Technical condition: good Visual appearance: good Please contact Vink Machinery for more information Bocker AHK 27/1200 Easyline * 2017 * 1849 working hours * Petrol * 27 meters hook height * 20 meters horizontal range * 1200 kg lifting capacity * Wheel drive * Remote control * Incl. documents

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 400 mm, controller model: Heidenhain TNC 426 PB, spindle speed (max.): 9,000 rpm, No reserve price – guaranteed sale to the highest bidder! Increased pressure to sell – exceptionally attractive offer! TECHNICAL DETAILS Ncedpfoywgvtjx Adtsr Travel X-axis: 1,200 mm Travel Y-axis: 800 mm Travel Z-axis: 400 mm Machine table: 1,280 x 830 mm Number of T-slots: 3x 18 H10 Spindle speed: 9,000 rpm Spindle taper: SK40 Spindle power: 9 kW Spindle torque: 84 Nm Max. linear axis speed: up to 30 m/min Tool changer: 24 stations MACHINE DETAILS Control system: Heidenhain TNC 426 PB Connection data: 400 V / 50 Hz Connected load: 32 kVA Fuse protection: 3x 63 A Transport dimensions Dimensions (L x W x H): 2525 x 2440 x 2700 mm Weight: 8,500 kg + 3 additional EU pallet spaces, each 1200 x 800 x 2200 mm

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm material thickness 25 mm weight 920 kg Manufacturer: GERD WOLFF Technical Details: • Length 2400 mm • Width 1200 mm • Height 200 mm • Weight 920 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 6 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 Nsdpfx Ajynbmmodtecr • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Year of construction: 2007, condition: used, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC Njdpsw Rf S Eefx Adtocr max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm tool taper SK 45 DIN weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN - Cooler - Technical documentation

Condition: new, thread dia. M6 - M36 turning speeds 30 - 150 U/min working area max. 1200 R angle adjustable from - to 0 - 90 Grad voltage 230 V engine output 1200 W weight 65,0 kg - Includes quick-change chuck Njdexab Elepfx Adtocr - for use with taps - for through holes and blind holes - Swivel motor unit for thread cutting - at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting - Thread is guaranteed to be right-angled (90°) - High productivity - significant time savings compared to manual thread cutting - Quick-change chuck with integrated slip clutch - Includes swivel arm with large radius - for easy positioning of the tap on the workpiece - Highly economical due to low investment and maintenance costs - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals Scope of delivery - Operation via touchscreen - Digital drilling depth display - Quick-change holder according to DIN - Quick-change chuck - Electric motor - 90° angle adjustment - Mounting flange Special accessories included: - BERNARDO base frame with 2 drawers * milled support surface 900 x 600 mm * including 3 T-slots (16 mm) * large storage space and 2 drawers for storing tools * 4x swivel castors including parking brake - Mounts according to DIN 376: * M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 1,200 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, total height: 2,700 mm, table load: 3,000 kg, overall weight: 17,600 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 11,000 W, number of axes: 5, This 5-axis OMV BPF-4 1200 universal machining centre was manufactured in 1999. Ideal for precision engineering, it offers robust construction and reliable performance. Consider the opportunity to buy this OMV BPF-4 1200 universal machining centre. Contact us for more information. Machine Benefits Technical Machine Benefits • Table length: 2300 mm // table width: 930 mm • T grooves: 7 • Width t-slots: 18 mm • Groove spacing: 120 mm • Working feed: 0 to 12000 mm/min fast feed: 12000 mm/min • Table distances: floor: 780 mm vertical spindle nose: 325 to 925 mm spindle nose horizontal: 410 to 1010 mm • Type: electric spindle iso 40 Nsdpfxox D R Hys Adtecr • Din: 69871 / compressed air: 6 bar • Vertical inclination: +170 degrees // horizontal inclination: +120 degrees • The bed has a weight of approx. 14000 kg Extra Information 360 degree swivel tableTable diameter 1000 mm, locked! The head can be moved in any direction and stopped at any position. Simultaneous movement is possible on the X, Y, Z, A and B axes, but not on the rotary table! Dimensions Machine Depth 4550 mm

Year of construction: 1996, condition: ready for operation (used), travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 360, number of axes: 3, Drilling machine manufactured in 1996. This Auerbach FBE 1200 features a Huron head and is equipped with a Heidenhain TNC 360 control system. With a working envelope of 1200 mm in the X-axis, 600 mm in the Y-axis, and 600 mm in the Z-axis, consider the opportunity to buy this Auerbach FBE 1200 drilling machine. Contact us for further details. • Head type: Huron head Nsdsylbi Nspfx Adtecr

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • X – 1200 mm • Y – 900 mm • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm Njdpfx Ajylw Stedtocr • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,250 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620, table load: 1,500 kg, spindle speed (max.): 20,000 rpm, number of axes: 4, This 4-axis +GF+ Mikron Mill E 1200 was manufactured in 2021. It features a spindle speed of 20,000 rpm, HSK A63 tool magazine, and rapid traverses up to 40 m/min. The work table measures 1450 x 600 mm with a maximum load of 1500 kg. Additional features include a Lehmann 4-axis rotary table and a liftable chip conveyor. Consider the opportunity to buy this +GF+ Mikron Mill E 1200 vertical machining centre. Contact us for more information. • Tool magazine: DT30, HSK-A63 • Rapid traverse: X/Y 40 m/min; Z 35 m/min • Table size: 1450 x 600 mm • T-slots: 5 • Spindle cooling system – 20 kHz • Linear scales: MILL E 1200 linear scales • Machine status light Additional equipment • Liftable chip conveyor • Chip trolley • Washdown system • Oil separator • Remote electronic handwheel • TS35.10 tool presetter (TNC 620) • IRP40.02 HSK63A measuring system • Lehmann 4-axis rotary table Technical Specification Nodpfoyb Sifjx Adtocr Taper Size HSK 63

Condition: new, Year of construction: 2024, Customizable Sawing Machine: The Ideal Solution for Small and Medium Sections Total Optimization, High Precision, and Maximum Speed in One Tool TRV 1200 is the perfect saw for tackling the daily challenges of processing single boards, whether raw or painted. With its advanced technology, this ultra-fast and efficient cutting system allows you to optimize each operation without stress for the operators. Whether for small or medium sections, the TRV 1200 is designed to meet all your needs, with a continuous work cycle that ensures flawless performance. Intelligent Operation and Full Automation With the innovative touch screen, you can easily upload cutting lists directly from the device or remotely, from your office. Once you select the desired optimization, the system autonomously handles all subsequent stages, including: Material introduction (*see Cursal accessories) Automatic advancement and positioning Immediate data transmission to the CNC and optimization Piece evacuation Quality, width, and length selection (*see Cursal accessories) Maximum Speed and Precision Without Compromise Ncodpfx Ajv Ip Uzjdtor With TRV 1200, speed is exceptional: 195 m/min, self-limited by the Brushless servo motor. The synergy of a high-performance optimizer, an indestructible machine structure, and precise table control ensures flawless results. The CNC-driven motorized belts and pneumatic pressure wheels guarantee perfect material positioning. Total Versatility for Every Type of Processing The TRV 1200 perfectly adapts to various applications, from recovery work to defect cleaning, or even more complex tasks that require advanced software processing. It is the ideal partner for optimizing every phase of the process, ensuring maximum results with minimal waste. Advanced and Easy-to-Use Programming Software Over 100 preset cutting plans: customizable widths, quality, and cutting specifications Different optimization options: for commercial value, for scrap, for quantity, for length, and mixed optimization Optimization simulation to ensure the best material management Continuous monitoring of worked quantities Internal optimization within the machine body to simplify the process and save valuable space Advanced Numerical Control for Efficient Management The heart of the TRV 1200 is the powerful CNC, an industrial computer that ensures continuous production without stoppages. With the HD touch screen, you can easily import data via USB and access simple yet powerful software, quick to learn and easy to use. Moreover, you can rely on online remote assistance for real-time troubleshooting. Discover how TRV 1200 can transform your production: speed, precision, and optimization at your fingertips.

Condition: new, thread dia. M5 - M24 turning speeds 70 - 200 U/min working area max. 1200 R angle adjustable from - to 0 - 90 Grad voltage 230 V engine output 1200 W weight 65,0 kg - with micro spray system for constant cooling & minimal Cooling lubricant consumption - Includes blow-out device to remove chips, ensuring optimal visibility on the borehole - Includes quick-change chuck for using taps for Through and blind holes - Swivel motor unit for thread cutting at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting, thread is guaranteed right angle (90°) - high productivity, significant time savings compared to manual Threading - Quick-change chuck with integrated slip clutch prevents breaking of the tap - Includes large radius swivel arm for easy positioning tap on the workpiece - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals scope of delivery - Operation via touchscreen - Digital drilling depth display - Micro spray system - Blow-out device - Quick change mount - Quick-change chuck according to DIN Ncjdpjxaaybofx Adtjr - Electric motor - 90° angle adjustment - Mounting flange Special accessories included: - BERNARDO base frame 900 x 600 mm (Art. No.: Mounts: DIN 376: M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24

Condition: used, Year of construction: 2012, operating hours: 2,093 h, 2012 | Terex Hd 1200 | Used Site Dumper | 2093 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 6500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Nsdpjyrgp Iofx Adtjcr 👷‍♂️ Inspected by an independent expert 29 inspection points 19 approved ✅ 1 imperfect ℹ️ 9 issues ⚠️ 📌 Inspector's Comment: The unit would not start properly with the ignition switch. But the seller has confirmed that it is in ok running condition and just came back from rental. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40165 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Keyence RB-1200 3D Bin-Picking Robot Vision System with Camera Unit and Controller Ncjdpfeyrun Ejx Adtor Manufacturer: Keyence Model: RB-1200 Type: 3D Bin-Picking Vision System for Robots System: Industrial image processing system for automatic part recognition Camera Unit: Keyence RB-1200 Vision Sensor Components: Camera unit, vision controller, mounting frame with four sensor modules Function: 3D detection and position determination of unordered parts in containers Application: Automated picking and removal of parts by industrial robots Connections: Industrial communication interfaces on the controller Scope of delivery: Camera unit, controller, sensor mounting frame, connection cables Condition: Good Location: Fulda

Condition: used, mileage: 288,811 km, power: 265 kW (360.30 HP), first registration: 08/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: silver, gearing type: automatic, emission class: euro6, loading space volume: 48 m³, loading space length: 8,200 mm, loading space width: 2,450 mm, loading space height: 2,380 mm, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, ANTOS 1836 L refrigerated box, 8.30 m with roller door + folding tail lift 2 t * THERMOKING T-1200 R (diesel engine) with 380 V electric standby cooling * ENGINE OM 470, inline 6-cylinder, displacement 10,677 cc * Vehicle number for customer inquiries: 3367 * Euro VI engine specification, version 2 * Active Brake Assist * Lane Departure Warning Ncjdpfxokwaddo Adtor * Air suspension, rear axle * Air conditioning * Differential lock, rear axle * Attention Assist * Stability Control Assist (ESP) * Standard trailer coupling, D40, Ringfeder * High Performance Engine Brake * Front axle air suspension * Tail lift * Wheelbase 6,100 mm * Antos model * Cruise control * Mercedes PowerShift 3 * Transmission G 211-12/14.93-1.0 * Comfort central locking system * Central locking with remote * Driver’s air suspension comfort seat * Trailer brake, dual-line, brake connections left * Electronic brake system with ABS and ASR * Particulate filter * Emissions sticker (green) * Two-seater * Weight variant 18.0 t (7.5/11.5) * Engine OM470, inline-6, 10.7 l, 265 kW (360 hp), 1800 Nm * AdBlue tank 60 l, left side * Diesel tank 290 l, left, 650 x 565 x 950 mm, aluminum * Digital tachograph, EU, rev counter * Tubeless tires 315/70 R 22.5 drive axle * Tubeless tires 315/70 R 22.5 front/lead/lift axles * M-Cab ClassicSpace, 2.30 m wide, 320 mm tunnel * 24 V trailer socket, 15-pin * Roof hatch/vent * High storage compartment on engine tunnel * Heating, electronic compressed air supply unit * Full service history * Metallic paint finish No liability for typographical or printing errors. Sale exclusively to commercial customers. Errors and interim sales excepted. Changes, interim sales, and errors are expressly reserved. The description serves to identify the vehicle and does not constitute a warranty as defined by sales law. The description according to the purchase contract is binding. * TOP SERVICE & QUALITY * We are happy to provide you with a LEASING-FINANCING-HIRE PURCHASE offer * Warranty insurance available upon request from the insurer * TÜV / UVV tail lift inspection / tachograph check and OBU device installation available through our local partners * 30-day export plates available * All export documentation possible, must be requested individually * Toll-Collect toll registration can be booked in-house * Free transfer from Stuttgart Airport or Metzingen train station * ARRIVAL TRAIN STATION: 72555 METZINGEN * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * * --- Visit our website at * Over 200 vehicles in stock at all times