Used Bacci Cnc Machine for sale (64,408)

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, total length: 8,000 mm, total width: 3,325 mm, table width: 500 mm, table length: 600 mm, table load: 500 kg, overall weight: 12,000 kg, spindle motor power: 11,000 W, 5-axis CNC machine (VMC) MAZAK - VARIAXIS J600-5X MACH-ID 9484 Make: MAZAK Type: VARIAXIS J600-5X Bodpeyyybhofx Al Iewl Control: MAZATROL matrix 2 Year: 2015 5 Axis Manufacturing cell with automation LANG 20 positions Renishaw 3D Taster with pre-setter ball LANG Preperation system with  vacuum 25 Units LANG pallet with vice / clamp / chucks Only 7155 Working hours ! New EUR 500.000 X - Travel: 850mm Y - Travel: 550mm Z - Travel: 510mm A - Axis: -120 to +30° B - Axis: - 120 to +30° Table Length: 600mm Table Width: 500mm Table load: 500 Table Ø: 600mm Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Feed rate B-Axis: 30Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 11kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3325mm Height: 3060mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, machine/vehicle number: 008495, X axis working area: 3050 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Bwsdpfx Ajy Edqqsl Isl Maximum edge height: 45 mm Total number of drilling spindles: 21 Total number of tool changer positions: 12

Condition: used, machine/vehicle number: 008469, X axis working area: 3050 mm Bwodoywafuspfx Al Ijl Y axis working area: 850 mm Number of controlled axes: 3 axes Total number of drilling spindles: 19 Total number of tool changer positions: 4

Condition: used, Year of construction: 2016, operating hours: 24,872 h, machine/vehicle number: 274448, 5 axes, travel paths (x/y/z): 350/550/510 mm, weight: 6,900 kg, power: 34.7 kVA, chip conveyor, 30-position tool changer, SK 40 tool holder, internal coolant supply, rotary table Ø: approx. 50 cm, error message after restart: data loss, 1 tool cabinet with 7 drawers, with accessories, !!!Collection: 10th+11th June 2026!!! Bwsdpfxsyztfpo Al Isl

Year of construction: 2022, condition: used, machine/vehicle number: EC2101, Grinding area (x/y): 900/460 mm, weight: 4,300 kg, with grinding dust extraction, DELTA control, 1 two-door/two-row workbench, 1 steel shelving unit, with accessories, !!!Collection: 01.+02.06.2026!!! Bwedeyztfispfx Al Iel

Condition: used, Year of construction: 2018, operating hours: 15,847 h, machine/vehicle number: 293044, 5 axes, travel (x/y/z): 850/550/510 mm, power: 34.5 kVA, spindle speed: 12,000 rpm, weight: 11,000 kg, 30-position tool changer, internal coolant supply, tool holder SK 40, chip conveyor, rotary table Ø: approx. 60 cm, 1 tool cabinet with 7 drawers, with accessories, 1 stool, !!!Collection: 10th + 11th June 2026!!! Bodpfx Asyztfvol Iswl

Condition: used, Year of construction: 2021, operating hours: 8,350 h, machine/vehicle number: 323618, 4 axes, travel paths (x/y/z): 560/640/640 mm, weight: 10,200 kg, power: 71.7 kVA, 40-position tool changer, 2-position pallet changer, internal coolant supply, SK-40 tool holder, chip conveyor, !!!Pick-up: 21st+26th May 2026!!! Bwedpfxoyztd Sj Al Iel

Condition: used, Year of construction: 2006, machine/vehicle number: 185631, Travel paths (x/y/z): 560/630/600 mm, tool holder SK 40, power: 64.6 kVA, weight: 9,900 kg, 32-position tool changer, pallet changer, chip conveyor, MAZAK MAZATROL 640M control, !!!Collection: 27th & 28th May 2026!!! Bwsdpfx Aloyztfce Isl

Condition: new, Year of construction: 2024, X-axis 4,400 mm Y-axis 1,600 mm Bwedpsy Ix Upefx Al Iol Z-axis 900 mm Spindle speed 2,000 - 24,000 rpm Drive power 14 kW Tool holder HSK 63 Tool changer 12 positions Control SIEMENS SINUMERIK ONE The machine has never been assembled and is immediately available.

Condition: ready for operation (used), Year of construction: 2006, A CNC vertical machining center Spinner is available. Travel X/Y/Z: 650mm/450mm/460mm, table dimensions X/Y: 710mm/450mm, max. table load: 500kg, speed: 8000rpm, tool holder: SK40, tool positions: 24, rapid traverse: 24m/min, feed: 10m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm. Machine dimensions X/Y/Z: approx. 2400mm/2100mm/2600mm, weight: approx. 9500kg, control: Fanuc. Without vise and dividing head. The spindle was recently renewed and the hydraulic pump is currently being renewed. The rotary table is leaking oil. Documentation available. An on-site inspection is possible. Bwodpfxjy Igbqj Al Iel

Year of construction: 1998, condition: used, ID No.: F40205, T-slot clamping table: approx. 4,200 x 960 mm; HEIDENHAIN control; chip conveyor KNOLL 200 S-1/50, year of manufacture: 1997, serial no.: 33897; belt filter KNOLL VRF 150, year of manufacture: 1998; hydraulic unit; control cabinet; cooling system BKW DL32V/4519-1KKSRZP, total machine length: approx. 10 linear meters. Bwjdpfoyzthqjx Al Iel

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE morbidelli x200 - Drilling and Milling Made for You! This numerically controlled machining center comes equipped with a comprehensive range of drilling and milling tools to meet any requirements in the processing of wood and similar materials. Highlights: • Powerful, featuring drilling spindles with 8,000 RPM and advanced technology – the most robust spindle available on the market, offering over 1,000 hours of maintenance-free operation • Better and more extensively equipped, with a multifunction table that allows for various configuration options, ensuring optimal setup according to your needs • Easier and more intuitive programming thanks to the integrated Cad-Cam module 'MAESTRO CNC' • User-friendly operation: the work table is accessible at all times, and both control cabinet and vacuum pump are integrated. In the PRO SPACE configuration, there are no safety barriers required Construction: The supporting structure consists of an exceptionally robust monolithic steel base, heavily ribbed and very rigid; its particularly wide support surface is specifically designed to ensure the machine’s stability, providing sustained precision regardless of working conditions, without the need for floor anchoring. The base provides a large, solid foundation for the moveable gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of withstanding the highest demands, resulting in superior performance quality and greater accuracy. Bwjdpfsywvldsx Al Iol The movable portal is formed from a solid single piece, anchored to both sides of the base and running on high-quality prismatic guides with recirculating ball carriages. Dual drive motors on the X-axis ensure top performance even under heavy-duty conditions. Movement along the lower movable unit (X-axis) and along the gantry (Y-axis) is achieved via helical rack and pinion transmission. This enables higher tooth-by-tooth thrust, greater acceleration, and increased velocity along the X and Y axes. The specially designed helical gearing ensures lower wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, providing perfect balance under dynamic load as well as allowing for strong acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, guaranteeing top-quality finishing since potential vibrations are fully eliminated. Movement along the X-Y-Z axes is accomplished with brushless motors powered by digital inverters, offering: - Reduced processing times due to improved acceleration - Enhanced positioning accuracy with high-resolution encoders - No need for setup referencing upon startup thanks to absolute encoders - Practically no general maintenance required due to the brushless system, as there are no brushes Axis movement and general machine operating elements are managed by an industrial NS module with digital data transmission.

Condition: used, Year of construction: 2024, CNC plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 3001.15P Year of manufacture: 2024 Working area: 1,500 x 3,000 mm 1 x plasma torch with Kjellberg Q1500 plasma source with automatic O² gas console (O², N²) Bwodpfxjytqmmo Al Iel 1 x TEKA filter unit for outdoor installation 1 x nesting software on the machine control Availability: immediately

Condition: used, Year of construction: 2005, CNC portal plasma cutting machine Manufacturer: Messer Model: Omnimat L8000 Year of manufacture: 2005 CNC control: Global Control Plus Bsdpoykruaefx Al Ijwl Track gauge: 8,000 mm Equipment: 1 x oxy-fuel bevel cutting unit DAF/L for weld seam preparation (bevels) 1 x Skew Rotator with Kjellberg FineFocus 800 power source 3 x ALFA oxy-fuel torches 1 x FineMarker marking unit Without table, filter, and rail track ID 16426

Condition: used, Year of construction: 2006, CNC Portal Plasma Cutting Machine Manufacturer: Messer Model: Multitherm 4000 Year of manufacture: 2006 CNC control: Global Control Bodeykpd Espfx Al Ijwl Working area: 3 x 12 m Track width: 4,000 mm Travel length: 15 m Extraction table 1 x plasma torch with Hypertherm HPR260 1 x plasma torch with Skew Rotator Delta and Hypertherm HPR260 Without filtration system ä16426

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Messer Cutting Systems Model: MetalMaster 2.0 6025 Year of manufacture: 2023 Bwjdpfeyhd Rbjx Al Iol CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm 1 x plasma torch with Kjellberg HiFocus 280i neo power source Automatic gas console Donaldson DFPRO 6 Cyclopeel filtration system Cutting software: Omniwin Standard Availability: immediately Ref.: ä16426

Condition: used, Year of construction: 2019, CNC Gantry Plasma Cutting Machine Manufacturer: Microstep Model: MG 4501.20 BkP Year of manufacture: 2019 CNC control Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with Hypertherm XPR300 power source incl. Optimix gas console 1 x 26 kW drilling spindle, up to 40 mm diameter, incl. 8-station automatic tool changer 1 x preparation for retrofitting a rotator (for bevel cutting) 1 x nesting software integrated in CNC control Bwsdsyay H Ajpfx Al Ijl ä5526 Availability: May 2026

Condition: used, Year of construction: 2019, CNC portal plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 CNC control Working area: 2 x 4 m Plasma rotator “MasterCut” Bsdpfjxnmbnox Al Iewl with fully automatic support for weld seam preparation 1 plasma torch with Kjellberg HiFocus 280i power source TEKA filter unit ä5526

Condition: good (used), Year of construction: 2012, CNC Gantry Plasma Cutting Machine Manufacturer: Microstep Model: SPL PAA 9001.25 Year of manufacture: 2012 CNC control Bedpfsu U Hm Asx Al Iewl Working area: 2,500 x 9,000 mm 1 plasma torch with Kjellberg HiFocus 280i power source 2 propane oxy-fuel torches Beuting oscillating conveyor table Donaldson DFPRO12 filter unit for outdoor installation

Condition: good (used), Year of construction: 2008, CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 CNC Control: Global Control Plus Year of Manufacture: 2008 Retrofit: 2019 Extraction Table: 2,000 x 3,000 mm 1 Oxy-fuel Torch ALFA 1 Plasma Torch Power Source: Kjellberg HiFocus 280i Filtration Unit: Z-Line 9 ZDC Bodpjiff Dasfx Al Iowl Own technicians available for installation, commissioning, and training! All spare parts in stock

Condition: used, Year of construction: 2012, CNC Laser Cutting System Manufacturer: Microstep Model: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC Control: iMSNC Windows Bwodpfxjx Eh Dre Al Ijl Laser hours approx.: 4,000-5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Max. sheet thickness steel: 15 mm Max. sheet thickness stainless steel: 8 mm Max. sheet thickness aluminium: 8 mm Operating temperature: +10 to +30 °C and max. 90% relative humidity (at 20°C) Extraction duct (left & right): outlet left, ø 250 mm Laser source: IPG Ytterbium Laser System YLS 2.5 kW Laser chiller: LC 170.01-A.3.5 Voltage: 400 V / 3-phase / 50 Hz Filter unit: TEKA 4H 5.5 kW Overall dimensions: approx. 10,400 x 3,610 mm

Condition: used, Year of construction: 2006, CNC portal flame cutting machine Bedpfx Alow El Ude Iowl Manufacturer: Bach Model: ACK-2D Year of manufacture: 2006 CNC control: NBS300 Working table: 1.5 x 6 m 2 oxy-fuel torches

Condition: good (used), Year of construction: 2011, CNC Gantry Oxyfuel Cutting Machine Manufacturer: Microstep Model: MasterCut-AM 9001.20 Year of manufacture: 2011 CNC Control: iMSNC with integrated network card Bwjdpfx Ajudn Rzjl Isl Working area: 2,000 x 9,000 mm Downdraft cutting table 1 oxyfuel torch Cutting thickness up to 150 mm 1 Kjellberg plasma marking unit Laser pointer Technical data in detail: 1x oxyfuel torch (fully automatic) 1x plasma marking unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC machine control system iMSNC with integrated network card LCD operator units on the gantry Laser pointer with automatic offset transmission iMSNC controller parameter database / Windows® Programming system “AsperWin-Basic” for direct programming at machine control Module macro library “AsperWin Select” Module NC simulator “AsperWin NC-Sim” Module “plasma marking” (for dotting) via plasma source Module “THC” / automatic height control via arc voltage USB2.0 port for storage device Remote diagnostics module MicroStep® “iFDS Win” Remote maintenance access via TeamViewer Central gas control via proportional valves Parameter database for 1 torch Energy supply cables Gas hoses for heating oxygen, cutting oxygen Acetylene machine cutting torch RHÖNA-Acetylene FIT+ 1 piece capacitive height control IHT / for oxyfuel 1 piece electric ignition unit RHÖNA-Acetylene Double-sided rope safety system (collision protection) for the gantry bridge via emergency stop Kjellberg® plasma marking unit FineMarker Fully automatic support for FineMarker Kjellberg® plasma marking system FineMarker CNC interface for FineMarker / integration into CNC control Module for automatic control of the marking device

Condition: used, machine/vehicle number: 10334, overall weight: 1,350 kg, This W+W PlasmaCut CNC plasma cutting machine is being auctioned online in our industrial auction / machinery auction for operating equipment of ZINK NFZ GmbH & Co. KG. Bsdsy Hqtbspfx Al Iowl

Condition: ready for operation (used), Year of construction: 2002, A Fehlmann CNC machining center that was used in the ceramics industry is available. Travel X/Y/Z: 700mm/420mm/610mm, speed: 20000rpm, tool holder: SK30, tool positions: 48, spindle power: 9kW, torque: 70Nm, table dimensions X/Y: 1260mm/490mm, weight: approx. 5200kg, control: Heidenhain TNC 430M. The C key has a fault on the ATS swivel apparatus regarding the amplitude. The ball screws of the X and Y axes were recently replaced. Without extraction system. Documentation available. An on-site inspection is possible. Bwodoy H I Euspfx Al Iel