Used Barida Ice 2500 for sale (4,199)

Condition: new, Year of construction: 2025, Motor power 1.5 HP Voltage 230V Motor type Three-phase Frequency 50 Hz Rotation speed 2850 rpm Fan size Ø 292 mm Suction connection Ø 125 mm Outlet diameter Ø 150 mm CFM 712 Air flow 1210 m3/h Max. static pressure 1344 Pa Dimensions 588x568x540 mm Lsdpfx Anev Dvrfexohl Weight 35 kg Direct drive fans are designed for dust. The design has been designed in such a way that access to the motor, impeller and bearings is as simple and quick as possible, which ensures simple installation and subsequent maintenance. The motors of our fans are TEFC type, with CE certificate. Equipped with a strong impeller for maximum efficiency. Ready to use immediately after plugging in.

Condition: good (used), Buderus 825 M-2500kw. Low temperature boiler Ledpsu I Ruaefx Anxohl

Condition: excellent (used), Loos steam boiler 2500 kW, 10 bar. (5082) Oil or gas burner available on request. Lhjdpfx Aexqr Dmenxsl

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Ljdpfjd I T Exsx Anxohl Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: new, Ice machine Ital Form Stainless steel construction and specific materials approved for food contact Standard working conditions: - Inlet water temperature 15°C - Ambient air temperature 20°C Dimensions: 1380x740x1015mm Electric power: 6kW Voltage: 400V 50Hz Lhodpfxstia Ute Anxol Productivity: 1500kg/24h Ice temperature: -5°C / -7°C Ice flake thickness: 0.9/1.2 mm Weight: 381 kg

Condition: used, Year of construction: 2012, Dematic conveyor system Accumulating roller conveyors Roller conveyor 3000-600-540, 750 RA2290 Manufacturer: Dematic Type: Drive unit accumulating roller conveyor Year of construction: 2012 Condition: good (used) Roller width (RB): 540 mm Element length: 3000 mm, optionally shortenable Stowage space size: 750 mm Roller pitch: 62.5-125 mm variable Drive types: Head and center drive Weight of conveyed goods: up to 30 kg Technical data: SEW geared motor 380V RA2290.1 Manufacturer: Dematic Type: Accumulation roller conveyor extension module Year of manufacture: 2012 Condition: good (used) Roller width (RB): 540 mm Element length: 3000 mm, optionally shortenable Stowage space size: 750 mm Roller pitch: 62.5-125 mm variable Drive types: Overdrive from RA2290 (necessary) Weight of conveyed goods: up to 30 kg Optionally available e.g: SEW Eurodrive / Movimot frequency inverter Supports Side guides Lhodpfx Anotp Tv Tsxel Price: on request plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, empty load weight: 410 kg, maximum load weight: 2,090 kg, overall weight: 2,500 kg, loading space length: 3,010 mm, loading space width: 1,500 mm, loading space height: 350 mm, tire size: 185/70R13, Sturdy braked low-loader with tandem axle from the manufacturer ANSSEMS model BSX2500 301x150. As standard equipment, the Anssems box trailer with brake has aluminum side walls, internal locks, external lashing eyes, profile channels for mounting accessories or load securing, very stable welded steel frame, railing on the side, front high frame, front flap, pull-out supports for tailgate, support wheel and a V-drawbar. Lhodpfx Aorz Rydsnxol We also offer accessories for Anssems car trailers such as tarpaulin and frame, flat tarpaulin, net hooks, grid attachment, side wall attachment, rear support set, tool box, lashing eyes, straps and lock.

Year of construction: 2026, condition: new, The equipment is generally considered project stock or, depending on availability, can be offered as a demonstration machine. Application: Accurate dosing of free-flowing products in precise quantities. Scale Features - Easy operation - Fast and uncomplicated cleaning - Low maintenance requirements - Tool-free assembly and disassembly of all product-contacting format parts - Low maintenance requirements - Corrosion-resistant stainless steel construction (1.4301) - Entire control system integrated within the machine housing - Continuously adjustable vibration system for optimal product flow - High accuracy through combination weighing Technical Data - Number of weighing heads: 10 - Weighing hopper volume: 2.5l - Weighing range: 10 - 1000g / 2,500g - Accuracy: ±0.2-1.5g - Speed: 60 bags/min (depending on product) - Control panel: 7" touchscreen display - Power: 1kW / 230V / 50Hz - Dimensions (LxWxH): 1620mm x 1100mm x 1110mm - Machine weight: 380kg Lsdoq T R Sbjpfx Anxjhl

Condition: good (used), Year of construction: 1980, Donewell press brake Type: 80-2500 Control: Cybelec CP 9220 Pressing force: 80 T Working width: 2540 mm Year of construction: 1980 Dimensions: 255x130x265 cm LxWxH Weight: approx 6300 KG Lsdpfx Aneqgcqisxohl

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale are 2 industrial air filters of the Air-Fresh-Service brand and type F-V15D The units are in very good condition and fully functional Units can be purchased individually or as a package, individual prices will be quoted on request Technical data: Year of construction: 2016 V/Hz: 400/50-60 A1,9-1,5 kW: 1.15 Structure: 2 filter chambers with 3 filters each On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Lhodpfx Ajt Tyqmenxol Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: MRG 2500 4G, total width: 1,980 mm, total length: 5,000 mm, total height: 4,700 mm, operating temperature: 95 °C, AHENA 3 MW-os Aprítékos Acél Kazán Ljdpfx Ansua D Twsxjhl Eladó egy teljesen új AHENA 3 MW teljesítményű acél kazán , amely négy füstjáratos rendszerrel, vízszintes füstcsövekkel és mozgó rácsos automatikus betáplálással rendelkezik. Ideális szilárd tüzelőanyagok, például fakéreg, faapríték és faforgács felhasználására. Ez a kazán kiváló választás nagy hatékonyságú és környezetbarát működéshez. Magyarországon, Cegléden található.

Condition: like new (used), Treif Breadslicer 4-24MM In good working condition for more information please sent an request Lsdpfx Anoumpg Roxohl

Condition: excellent (used), Year of construction: 2002, I sell the 2-head 2-lamp UV-drying tunnel Cefla TLE/B/2+TTE 2500 Year 2002 Working width 1400mm. Total length 2,50m 2 Lamps HG 120 W + HG 120 W Ljdpfx Anjt S Efgexehl Total power 37,7 kW Very good condition, available immediately.

Condition: good (used), functionality: fully functional, machine/vehicle number: 24732, Ficep 1105 punching machine, 110tns, multifunction machine, punching 30 x 25, shear 510 x 16mm, 400 x 19mm, 300 x 22mm, 200 x 25mm, 90º angle cutting 150 x 150x16mm, 45º angle cutting 100 x 10 mm, round and square cut 50mm, punching max diameter 32 thickness 26mm, with several working elements, with electric stop, with different accessories, in good condition Lsdpstvfcmsfx Anxehl

Condition: used, Year of construction: 1977, pressure 160 t throat 340 mm stroke 20-120 mm no. of strokes max. 45 Hub/min table plate 1000 x 720 mm Lhsdpfx Anjzwg Umexol ram surface 750 x 380 mm daylight 330 mm weight of the machine ca. 8,7 t dimensions of the machine ca. 1270x2310x2595 m

Condition: used, Year of construction: 2006, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, inner dimension length: 9,150 mm, inner dimension width: 1,900 mm, inner dimension height: 3,000 mm, number of chambers: 2, Drying chamber with trolleys on rails 2 trolleys Lsdpfsy Sbutsx Anxjhl dimensions: 2x 1900*3000*9150 2x 3kW fans Automatically controlled with adjustable drying programs

Condition: used, CNC Turning and Machining Cente: Gildemeister/DMG Mori CTX2500/700 Year: 2019 Serial No.: 02620000651 Lsdpezwn Sgsfx Anxehl 2 driven spindles, rated speed 4,000/5,000 rpm, net weight 6,360 kg, accumulated operating hours 44,087 h, spindle hours: 27,832 h, cooling unit, chip conveyor, coolant treatment system, control system model: Ergoline, tool turret, 14 positions, for driven tools

Condition: new, Year of construction: 2013, Internal valve, Petrol Valves, Body - A995-4A/UNS, J92205 NACE, Class ASME 2500, 8inch, Serial 39275. API 6D, ISO 14313, 3pcs. Lhsdpfevvh H Eox Anxsl

Condition: used, Year of construction: 2010, machine/vehicle number: 10A46 & 10A47, functionality: limited functionality, power: 110 kW (149.56 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 160 mm, cutting width (max.): 650 mm, total length: 20,000 mm, total width: 2,000 mm, total height: 2,100 mm, table height: 850 mm, LIMITED-TIME OFFER. Manufactured in 2010 by the renowned Italian brand A. Costa Righi, this professional woodworking setup, comprising the LEONE heavy-duty multi-ripsaw and the MAXI-CUT cross-cutting machine, is currently available in good to moderate overall condition, although it is currently stored partially disassembled in our warehouse. Lhjdpfx Anezxx Dvsxsl

Condition: excellent (used), For sale: Professional Schneider Electric Masterpact NW25 H1 circuit breaker equipped with a Micrologic 5.0 A protection unit. This device is used in industrial power distribution systems—such as low-voltage switchboards, manufacturing plants, industrial halls, and power installations. The Masterpact NW series circuit breakers are designed for demanding industrial environments and provide reliable protection against overloads and short circuits. The unit is in very good visual and technical condition—the exact condition can be seen in the photos. Technical Specifications: Manufacturer: Schneider Electric Series: Masterpact NW Model: NW25 H1 Protection unit: Micrologic 5.0 A Rated current: 2500 A Insulation voltage: Ui 1000 V Impulse withstand voltage: Uimp 12 kV Operating voltage: up to 690 V AC Breaking capacity Icu: 65 kA Ics: 100% Icu Standard: IEC 60947-2 Frequency: 50 / 60 Hz Utilization category: AC23A Lhjdpsyua Amjfx Anxel Year of production: 2011 Assembly location: Schneider Electric Venray (Netherlands) The circuit breaker protects installations against overloads and short circuits, and allows for adjustment of protection parameters thanks to the Micrologic unit. Applications: • Low-voltage switchboards • Industrial facilities • Power installations • Energy distribution systems • Large machinery and production lines ✔ Robust industrial construction ✔ High breaking capacity ✔ Adjustable Micrologic protection settings ✔ Equipment from the renowned manufacturer Schneider Electric

Condition: excellent (used), The PFAFF 335 H3 2/27 is a high-quality German sewing machine equipped with a cylindrical arm, a work table, and an EFKA Variostop drive. This model is used for sewing leather, upholstery, leather goods, footwear, suitcases, and other items with complex shapes. Technical specifications: Manufacturer: PFAFF Model: 335 H3 2/27 Cylindrical arm EFKA Variostop VD24 drive Power supply: 220 / 380 V Motor power: 370 W Rotational speed: 1400 / 1700 rpm 50 / 60 Hz Work table included Bobbin stand Foot control Condition: Lhedpfx Aozgt Tuonxjl Used machine. In good visual condition. Condition as shown in the photos.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: manual, actuation type: electric, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 1,500 W, laser wavelength: 1,063 nm, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 1 mm, table length: 600 mm, table width: 600 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 100 m/min, cutting speed: 60 mm/min, positioning speed: 60 m/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 50 kg, power: 1.5 kW (2.04 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, overall weight: 1,000 kg, total length: 1,630 mm, total width: 1,450 mm, total height: 1,850 mm, warranty duration: 12 months, Equipment: cooling unit, documentation/manual, emergency stop, Extremely precise and fast machine. The software is easy to learn. Output power from 1 to 3 kW is available for this machine. This laser cutting machine is extremely robust and requires minimal maintenance. Ideal for cutting all types of metals. Lhedjzzkrwjpfx Anxol The recessed marble bed prevents warping due to heat. Applications: medical technology, toolmaking, precision components.

Condition: like new (used), we are interessted in buying obsolete electronic components, semi conductors microprocessors, etc Lodpfjizi Twjx Anxohl

Condition: used, Year of construction: 2019, functionality: fully functional, table length: 8,000 mm, table width: 2,540 mm, overall weight: 8,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 8,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO G25LG - CNC PLATE PROCESSING LINE (DRILLING, MILLING, THERMAL CUTTING) | YEAR 2019 The Ficep Tipo G25LG is a CNC plate processing line for combined drilling, milling, tapping and thermal cutting of steel plates in structural steel fabrication. Built in 2019 - a young machine in its class on the used market. All processes run in a single pass on a rigid double-bridge gantry frame. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The vertical mono drilling unit with automatic tool changer (ISO 40) performs drilling, milling, tapping, centre-punching and countersinking. The Hypertherm XPR300 plasma torch and the integrated oxy-fuel cutting unit handle thermal cutting - from thin sheet to heavy plate. The line is operated via the Ficep Pegaso CNC control. Infeed and outfeed roller conveyors with material transfer (8 m each) ensure continuous material flow. Typical applications: structural steel fabrication, steel trading and plant engineering. TECHNICAL DATA - Manufacturer: Ficep | Model: Tipo G25LG | Year: 2019 | Serial number: 36098 - Machine type: CNC plate processing line (drilling / milling / thermal cutting) - Condition: used, refurbished by certified technician - Frame design: double-bridge gantry frame, welded | Machine weight: 8,000 kg - Plate width: max. approx. 2,540 mm, min. 200 mm - Plate thickness: max. 45 mm (plasma cutting), max. 100 mm (drilling) - Drilling heads: 1 (vertical mono drilling unit) | Tool holder: ISO 40 - Max. drilling diameter: 40 mm | Max. drilling/milling depth: 100 mm - Max. spindle speed: 7,000 rpm | Spindle power: 15 kW - Plasma cutting torch (straight): 1 | Plasma source: Hypertherm XPR300 | 300 A - Oxy-fuel cutting unit: included - CNC control: Ficep Pegaso CNC - Processes: drilling, milling (incl. straight/curved slots, Y/J weld-edge preparation), tapping, centre-punching, countersinking, marking, scribing, straight plasma cutting, oxy-fuel cutting On request (to be confirmed bindingly during inspection): processing length, tool magazine stations, min. plate thickness for drilling, min. drilling diameter, pass line height, longitudinal and cross positioning speeds, connected load and machine dimensions. SCOPE OF DELIVERY - 1 x Ficep Tipo G25LG CNC drilling, milling and thermal cutting line (year 2019) - 1 x Ficep Pegaso CNC control - 1 x Vertical mono drilling unit with automatic tool changer (ISO 40) Lhedpfeu Dw I Esx Anxel - 1 x Plasma cutting torch (straight) | 1 x Hypertherm XPR300 plasma source (300 A) - 1 x Oxy-fuel cutting unit - 1 x Infeed roller conveyor with material transfer (8 m) | 1 x Outfeed roller conveyor (8 m) - 1 x Extraction system for plasma cutting LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Condition: used, Year of construction: 2020, functionality: fully functional, table length: 6,000 mm, table width: 2,540 mm, sheet thickness steel (max.): 50 mm, cutting length (max.): 6,000 mm, cutting width (max.): 2,540 mm, FICEP KRONOS KR25SP - CNC GANTRY PLASMA CUTTING SYSTEM FOR STEEL PLATES | YEAR 2020 The Ficep Kronos KR25SP is an automatic CNC gantry system for high-definition plasma cutting of steel plates, designed for steel construction and sheet metal fabrication shops that need precise, repeatable and cost-efficient parts directly from plate. With a maximum plate size of 2,540 x 6,000 mm and a plasma cutting thickness of up to 50 mm, it covers a broad range of parts in a single pass. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. The machine is fully functional and can be put into production immediately. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The KR25SP cuts steel plates fully automatically according to CNC program in gantry design. Using Hypertherm plasma technology including True-Hole technology, it produces contour-accurate cut parts and hole patterns at high cut quality - ideal for gusset plates, end plates, base plates and connection components in steel construction. The robust grid cutting table is prepared for connection to an extraction system; a network remote-diagnosis interface supports maintenance and support. TECHNICAL DATA - Manufacturer: Ficep S.p.A., Italy | Model: Kronos KR25SP (KRONOS SP series) - Machine type: Automatic CNC gantry plasma cutting system for steel plates Lhjdpsv Iaqyofx Anxjl - Year of manufacture: 2020 | Serial number: 36499 - Condition: used, refurbished by certified technician - Maximum plate size (W x L): 2,540 x 6,000 mm - Max. plasma cutting thickness: 50 mm - Plasma straight-cut torch: 1 | Plasma unit: Hypertherm XPR300 - Hypertherm True-Hole technology: available - CNC control and drives: Fanuc (to be confirmed on the machine during inspection) - Remote diagnostics: available (network connection) - Cutting table: robust grid construction, prepared for extraction system - Extraction and filter system: optionally available Further details (machine weight, connected load, footprint, cutting speed) are available on request. SCOPE OF DELIVERY - 1 x Ficep Kronos KR25SP gantry system (year 2020) - 1 x plasma straight-cut torch (Hypertherm XPR300) - Grid cutting table with extraction preparation - CNC control and drives - Remote-diagnosis interface (network) LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border - short transport distance from the entire DACH region. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) is your specialist for refurbished Ficep steel construction machinery. We supply inspected, ready-to-operate systems for steel construction and sheet metal fabrication. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).