Used Bornemann Twist for sale (342)

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P3500i power generator The Atlas Copco P3500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 3500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood, CE compliant noise level, quiet Power sockets Bsdsl R Hz Sspfx Am Tsdf Electric key start (12V) Inverter technology, stable voltage and frequency Instrumentation, voltmeter, hour meter Circuit breaker Wheels Engine alarm: low oil level, overload Intelligent speed control for fuel efficiency Connections for parallel operation (parallel operation kit with cables optionally available) Voltage 230V / 50Hz Peak power 3.3 Rated power 3.0 Tank capacity (l) 10.0 Starter type electric / cable Weight 45.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 240/120V Twist Lock

Year of construction: 2022, condition: new, machine/vehicle number: AN2301155, Atlas Copco P2500i power generator The Atlas Copco P2500i iP mobile power generator is a lightweight, efficient and reliable source of mobile power. Thanks to its high fuel efficiency and compact dimensions, the power generator is versatile for daily use, for frequent single jobs, typically for power tools as an inverter power generator or as an emergency generator. With good sound insulation, the emergency generator is very quiet and hardly louder than an electric razor. The emergency generator is equipped with a large fuel tank and therefore runs up to six hours before it needs to be refueled. Despite the large fuel tank, the emergency generator is compact and light enough to be transported across construction sites or stowed away to save space. The intelligent, variable speed control, together with the option of parallel operation, results in an efficient power supply with minimal fuel consumption, as the engine speed is adapted to the current load conditions. Key product features: Atlas Copco P 2500 i inverter power generator Pull starter Large fuel tank Engine oil level monitor Overheating protection Silenced hood CE compliant noise level, quiet Bjdjl R Hy Ajpfx Am Tjdf Power sockets Inverter technology, stable voltage and frequency Engine alarm: low oil level, overload Speed control for fuel efficiency Connections and cables for parallel operation Voltage 230V / 50Hz Peak power 2.5 Rated power 2.3 Tank capacity (l) 4.0 Starter type pull starter Weight 27.0 Fuel Gasoline Max. Sound pressure level (LPA) at 7 m 63.0 Sound power level (LwA) 88.0 Sockets 2x Schuko 2P+G 16A | 2x Nema 120V 20A | 1x Nema 120V Twist Lock

Condition: excellent (used), Catalog number 7995 TECHNICAL DATA - max. planing width 240mm - max. planing height 140mm 4 spindles: 1) horizontal bottom 240mm, 5.6kW 2) vertical right 140mm, 5.6kW 3) vertical left 140mm, 7.5kW 4) horizontal top 240mm, electrically adjustable up/down, 0.37kW - 7.5kW - diameter of all spindles 40mm - all spindles adjustable up/down and right/left - from above, 5 toothed, twisting feed rollers, including 1 double roller - from above, 2 rubber feed rollers - from below at the outlet, a split metal feed roller - rollers are pneumatically pressed - 3 side pressure rollers - electric adjustment of planing thickness, 0.37kW - length of infeed table 2080mm - stepless feed rate adjustment via frequency inverter - feed via Cardan shafts - feed motor 3.7kW - central lubrication - diameters of dust extraction nozzles 4x125mm - dimensions L/W/H 3600x1650x1700mm - weight approximately 3000kg Bjdpfx Asy T N Ahjm Todf ADVANTAGES – German-made, GUBISCH brand – with 4 heads – DTR documentation available – used planer, very good condition Net price: 32900 PLN Net price: 7840 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), Catalog number: 8052 TECHNICAL DATA - Shaft width: 640mm - Number of knives: 4 pcs - Maximum thickness of workpiece: 240mm - From top to bottom: - Feed rollers/kickers - Toothed, pulling, and twisting infeed shaft - Pressure roller - Planing shaft - Pressure roller - 2 smooth, pulling, metal outfeed shafts Bdedpfx Amoznknxo Tjf - Motor: 5.5kW - Electric table lifting - 4 feed speed settings: 6/9/12/18 m/min - Feed motor: 1.1kW - Diameter of dust extraction port: 160mm - Dimensions (L/W/H): 1300x1100x1400mm - Weight: 1060kg ADVANTAGES - Made in Italy - Electric table lifting - Used thickness planer, very good condition, complete with DTR documentation Net price: 19900 PLN Net price: 4738 EUR (depending on the exchange rate of 4.20 EUR) (Prices are subject to change due to exchange rate fluctuations)

Condition: used, Year of construction: 1998, Portal Milling Machine JOBS JOMACH 241 Year of construction: 1998 Travel X: 3400 mm Travel Y: 2700 mm Travel Z: 1250 mm Numerical Command: CNC Siemens SINUMERIC 840 D Table size: 3000 x 1500 mm Distance between uprights: 1700 mm 1 Tool Changer 32 Tools ISO 50 + 1 Tool Changer 32 Tools HSK-63 3 Milling heads - Axe C: 2 heads TWIST - ISO 50 + HSK 63 A + 1 head 3 axes ISO 50 Weight: 44 T Bdodpozn Hhhefx Am Tof

Condition: used, Year of construction: 2020, operating hours: 3,698 h, 2020 | Vögele Super 700i | Used Asphalt Paver | 3698 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 66000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 51 inspection points 44 approved ✅ 7 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The assembly works but some points require repairs. The ground operator control panels are not working due to a connectivity issue (the panels were tested on another machine and function correctly). The central screed and the auger extensions are very worn. The high-pressure cleaner pump is out of order. The screed frame is twisted at the cylinder arms level (see torch marks on the photos); it will need to be straightened. The 3 screed heating circuits are functioning. Documents available upon request. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40948 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: Bdedpfxjzi U I Ee Am Tof ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space length: 29,000 mm, loading space width: 2,540 mm, loading space height: 2,850 mm, total length: 29,000 mm, total width: 2,540 mm, total height: 2,850 mm, suspension: air, tire size: 385/65-R22.5, Year of construction: 2026, Equipment: ABS, - BPW axles - EBS - Air suspension - Disc brakes - Central lubrication system NEW MAX210-Z-3AA-13.60-22.5-2.54, available directly from stock Technical data MAX210-Z-3AA-13.60-22.5-2.54 Total weight: 48,000 kg / Coupling pressure: 18,000 kg / Axle load: 30,000 kg / Tare weight: 11,456 kg / Payload approx.: 36,544 kg / Coupling height (laden): 1150–1250 mm / Turning radius: 2300 mm Loading area length: 13,600 mm / 2-way extendable (2 x 770 mm) to 2900 mm / Wheelbase: 1810 mm Technical description: Extendable loading area with pneumatic locking / A fixed intermediate table of ± 250 mm is located in the central box structure. / 8 pairs of lashing eyes that fold outwards (LC 5,000 daN) / 3 pairs of lashing eyes that fold outwards (LC 10,000 daN) / Recesses in the outer frame for attaching lashing straps (LC 2,000 daN) Tires: Tires 385/65 R22.5 (Brand: Goodyear) Tire pressure monitoring system (TPMS): TPMS according to ECE R 141 Axles: BPW axles with disc brakes, air-suspended with raising and lowering valve. All axles are hydromechanically steered. Technical axle load: 10,000 kg (ET 0) Braking system: WABCO braking system according to EU regulations with EBS-E system (2S2M), without connecting cable to the tractor. Steel structure: Steel structure made of high-quality fine-grain steel. Steel grades: S355J2+N/S355MC (Yield strength 355 MPa) / S690QL/S700MC (Yield strength 690 MPa) Electrical system: Electrical system according to EU regulations, lighting 24 V ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the galvanized connection strip at the front with 24N, 24S and 15-pin sockets. Connections according to ISO / 24N ISO-1185 / 24S ISO-3731 / 15-pin ISO-12098 Warning signs: Below the gooseneck and at the rear, left and right, holder for warning signs with socket. Options: • Maneuverability at the front and rear via cable remote control with PDC light control for axle alignment. (without mounting on the tractor) • Electro-hydraulic unit (approx. 45 kg) • 2 wheel chocks with holder on the partition wall • Kingpin 2" • Galvanized steel partition, approx. 1600 mm high. EN12642-XL Bdsdpfx Ajzhxgism Tjf • White reflector tape according to EU regulations over the entire length and width. Red at the rear. • EU marking plates (red-yellow) at the rear of the vehicle. • Holder for a rotating beacon at the rear of the vehicle. • Loading floor made of 30 mm thick hardwood, reinforced with omega profiles (approx. 298 kg). • 10 pairs of stake holder, approx. 100 x 50 mm, in the outer frame of the loading floor. • 1 spare wheel holder under the loading floor on the right. • BEKAMAX (Pico) central lubrication system with 2 pumps. • 6 pairs of recesses in the loading floor for WADER container locks, for 1 x 20', 2 x 20', 1 x 40' or 1 x 45' container. • 5 pairs of stake profiles, mounted across in the loading floor, for stakes 100 x 50 mm • Galvanized storage compartment under the loading floor (2390 x 720 x 400 mm) • Rope hooks (8 mm), every approx. 500 mm below the edge profile of the gooseneck and the loading floor • Ladder, mounted on the left in the direction of travel • Stainless steel toolbox • LED lighting • 10 pairs of twist locks (100 x 50 mm, length 1000 mm) • 8 container General information Year of manufacture: 2026...

Condition: good (used), Strapping machine, strapping kit, tensioning and sealing device, textile strapping kit Bdedpfx Aezfg E Ujm Tof -Strapping kit: with tensioning device, dispenser and staples -Band width: up to 19 mm -Staples/twist clamps: see photos -Transport dimensions: 400/390/H520 mm -Total weight: 15 kg

Condition: used, mileage: 2,496 km, power: 434 kW (590.08 HP), first registration: 05/2026, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x2, wheelbase: 5,150 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2026, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, parking heater, power assisted steering, retarder, seat heater, spoiler, traction control, trailer coupling, - Roof spoiler - Power steering - Remote central locking - Refrigerator - LED headlights - Leather interior - Alloy wheels - Lift axle - Air suspension - Fifth wheel coupling - Engine brake - PTO - Radio - Rear view camera - Disc brakes - Sun visor - Spotlights - Auxiliary heater - Tool box New Scania R590 8x2*6 Color: Ivory white. All-round air suspension. Retarder. Automatic transmission with overdrive. Interior styling package V8, black leather with red stitching. Premium driver's seat, leather with red stitching. Swiveling passenger seat. Auxiliary heater for cab and engine preheating. Coffee maker. Refrigerator. Box truck / tractor combination. Removable fifth wheel that can be easily mounted in different positions. Removable rear frame, allowing the cargo box to be used in two lengths. Bdjdpszh Ixzsfx Am Tof - Tractor / short cargo box. Total length: 966 cm Cargo floor length: 474 cm. Distance from front of vehicle to center of fifth wheel: 721-831 cm Coupling height: 125 cm. Distance from front of vehicle to center of kingpin: 954 cm - Complete box truck. Total length: 1096 cm. Cargo floor length: 630 cm. Distance from front of vehicle to center of kingpin: 1076 cm. Body blasted and primed. Headboard with storage space for ladder and level. 2 x round outrigger, 90 cm. Stainless steel boxes all around. Chain boxes between the axles. Width markers with lighting. Outriggers. 4 x outrigger row Outrigger pots in side rail. Recessed tie-down eyes in side rail. Twist locks / can be placed in different width positions. Work lights in side rails. Stainless steel rear frame with work lights and flashing lights. Palfinger PK 92002-SH F. 7 x hydraulically extendable section: 18.7 m Fly jib PJ170 E. 6 x hydraulically extendable section. 2,500 kg winch / 65 m cable length. 10,000 kg front support. Support legs that can be folded up hydraulically. Technical Information Number of cylinders: 8 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tire size: 385/55R22.5; Steered; Tire tread left: 100%; Tire tread right: 100% Front axle 2: Tire size: 385/55R22.5; Steered; Tire tread left: 100%; Tire tread right: 100% Rear axle 1: Tire size: 315/70R22.5; Tire tread left: 100%; Tire tread right: 100% Rear axle 2: Tire size: 385/55R22.5; Steered; Tire tread left: 100%; Tire tread right: 100% Weights Unladen weight: 29,128 kg Payload: 9,872 kg GVW: 39,000 kg Functional Crane: Palfinger Interior Upholstery: Leather Maintenance MOT (Technical Inspection): Valid until 06.2027 Financial Information Price: On request Identification Model number: R590 8x2*6 / TRACTOR / PALFINGER ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki We make every effort to provide accurate information, but no rights can be derived from the information provided.

Condition: used, Year of construction: 1996, core drilling diameter max. 25 mm bore depth 1000 mm swing diameter mm total power requirement 25 kW weight of the machine ca. 12,5 t dimensions of the machine ca. m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling " Centre " Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 _____ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed motors 27 Nm / 1.000 daN Spindle drive steplessly adjustable 7 kW Total electrical load, approx. 30 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm. " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc. " High Frequency Spindle Make GAMFIOR with stepless speeds " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc. " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation. " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm, " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions " Built-in coolant device with chip conveyor and various filters. " 2 steady rests. " Completely covered working area with access at the front and at the side. Condition : Very good condition. This is a rare and valuable machine. Under Power Delivery : immediately ex our Stock Bedjt Hw Ayspfx Am Tedf Payment : Net, after conclusion of contract.

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2014, total width: 2,470 mm, suspension: air, tire size: 385/55R22.5, color: black, Year of construction: 2014, Axle configuration Tyre size: 385/55R22.5 Make axles: BPW Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 4.962 kg Carrying capacity: 38.038 kg GVW: 43.000 kg Maintenance APK (MOT): tested until 10/2026 Condition Technical condition: good Visual appearance: good Damages: none Identification Registration number: ON-83-LL Additional information Please contact Arie or Pedro for more information Bdsdpfszhwcijx Am Tjf = Additional options and accessories = - Air suspension - EBS - Extandable - Lift axle - Twist-locks = Remarks = D-TEC Flexitrailer 2014 3x uitschuifbaar: voor, midden en achter

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 05/2015, total width: 2,470 mm, suspension: air, tire size: 385/65R22.5, color: blue, Year of construction: 2015, Axle configuration Tyre size: 385/65R22.5 Make axles: SAF Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 4.765 kg Carrying capacity: 38.235 kg GVW: 43.000 kg Maintenance, history and condition APK (MOT): tested until 05/2027 Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS - Extandable - Lift axle - Twist-locks = Remarks = Bdedpfx Amjzhuxbo Tof D-TEC Flexitrailer 2015 3x extendable: front, middle and back

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,900 kg, maximum load weight: 20,100 kg, overall weight: 24,000 kg, axle configuration: 3 axles, total length: 9,200 mm, total width: 2,550 mm, total height: 1,180 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example only. Production and equipment are customized according to customer specifications. # Chassis – Turntable Swap Body Trailer Heavy-duty fine-grain steel welded construction Adjustable and foldable front stop 2 pairs of removable guide rollers (front and rear) 4 container twist locks with reinforced outriggers on a 20" base for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball-bearing ring 2 wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Half-shell mudguards (front and rear) 2 lockable stainless steel toolboxes (600 × 400 × 500 mm) with polished doors 1 pair of double LED illuminated rear warning panels, extendable to 3,000 mm Electrical connector prepared for customer-installed front warning panels # Drawbar Drawbar with certified 40 mm towing eye Mechanically adjustable drawbar length (6 × 100 mm positions), approx. 1,900–2,500 mm Spring-assisted drawbar height adjustment # Axles + Suspension BPW disc brake axles with 430 mm brake discs Laser-measured axle/chassis alignment for reduced tyre wear and fuel consumption Air suspension with raise/lower valve # Wheels and Tyres 385/55 R22.5 tyres (manufacturer's choice) Factory silver steel rims # Brake System Dual-line compressed air braking system Spring parking brake 2 non-interchangeable air couplings with connecting lines to the towing vehicle Electronic Braking System (EBS) with front connector and connecting cable Note: Trailer may only be operated with towing vehicles that ensure full ABS functionality. # Electrical System Bdedpfxezndmzs Am Tof 24 V electrical system Multi-chamber lighting Yellow LED side marker lights 2 white front position lights 2 white/red rear outline marker lights Removable rotating beacon 1 LED rear work light, activated via reverse gear 2 LED side work lights (left and right), activated via reverse gear 1 × 15-pin front connector with connecting cable # Registration Prepared for registration in Germany DEKRA approval and certificate according to §13 EC-FGV 24/7 service hotline Prepared for single-line number plate holder ECE R48 reflective contour markings (white sides, red rear) # Finish Frame hot-dip galvanized with passivation, including 15-year anti-corrosion warranty Drawbar KTL-coated in black Please note: Archive photos shown – actual vehicle may differ.

Condition: used, functionality: unexamined, Year of construction: 1995, Bending capacity 6000D: Ø 6 to 60 x 4 mm Automatic mandrel retraction Bsdpfxszlg Aye Am Tedf Manual twisting device

Condition: excellent (used), Catalog number 6765 TECHNICAL DATA - max width of workpiece 230mm - max height of workpiece 160mm number of spindles 4: 1) horizontal lower 230mm, 5.5kW 2) vertical right 160mm, 5.5kW 3) vertical left 160mm – electrically adjustable left/right from the control panel, 5.5kW 4) horizontal upper 230mm – electrically adjustable up/down from the control panel, 7.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm from above: - infeed rollers, toothed, 6 pcs, including 2 double rollers - outfeed rollers, rubber, 2 pcs from below: - infeed roller, toothed, metal, twisted in the lower bed + - outfeed roller, metal, smooth - rollers pneumatically adjustable - length of infeed bed (with pneumatic feeder) 3390mm - possibility of operation without engaging the pneumatic feeder, - bed adjustable up/down - central lubrication - electric adjustment of planing thickness - smooth adjustment of feed speed - feed on Cardan shafts - feed motor 4kW - enclosed in a cabinet - diameters of dust extraction nozzles 4x120mm - dimensions L/W/H 7000x1950x1700mm, - weight approximately 3000kg - for wet and dry wood - pneumatic feeder on the infeed table, - planer used, very good condition Net price: 65900 PLN Net price: 15690 EUR Net price calculated based on the exchange rate of 4.2 PLN/EUR Bdsdozlrnuspfx Am Tsf (price may change in case of larger exchange rate fluctuations)

Condition: used, empty load weight: 2,820 kg, maximum load weight: 15,180 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2017, wheelbase: 5,040 mm, color: black, gearing type: other, driver cabin: other, Equipment: ABS, German trailer, from first owner, turntable steering, condition as per photos, air suspension with raise/lower function, SAF axles, disc brakes, drawbar length 1,400 mm, BDF swap chassis with BDF twist lock, ABS/EBS, Wabco premium braking system, spring-loaded parking brake, coupling height 750 mm, wheelbase 5,040 mm, gross vehicle weight 18,000 kg, unladen weight 2,820 kg, payload 15,180 kg. If a new TÜV inspection is required, we are happy to provide an offer from one of our partner workshops. Our offer is generally WITHOUT new TÜV inspection, WITHOUT new DGUV, WITHOUT new SP, WITHOUT new UVV. Additional trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish. Note: Bdodpfxjw Tdnds Am Tef We offer and strongly recommend viewing and inspection of the item, so that no misunderstandings arise regarding condition and suitability for the buyer. Viewing and inspection are possible and expressly desired by appointment at any time. All information is provided without guarantee. No liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: used, amount 1 Palette Milling, drilling, and cutting tools for CNC and conventional machine tools. These include: -> Face mills — large milling heads with multiple indexable inserts, ideal for facing large surfaces. -> Cylindrical end mills — cylindrical mills with face and peripheral teeth, often used for grooves and contours. -> Disc cutters — thin, round cutters for cutting or for deep grooves. -> Drills — various twist drills for metalworking. -> Gear hobs — gear-like cutters for producing gear teeth. -> Tool shanks (SK/ISO/BT) — the tapered tool holders on which the cutters are mounted. -> Collet chucks — holders for smaller tools, such as drill bits or end mills. -> End mills — smaller cutters with multiple cutting edges for contouring, Bdodpfx Amozhcf Ne Tef pocketing, and 3D machining. -> Indexable-insert cutters — cutters with replaceable carbide inserts. -> Circular saw blades — round saw blades for cutting or slotting. -> Adapters and spacers — for adapting different tool holders. Complete package price Complete package price

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 08/2027, working width: 300 mm, conveyor belt width: 300 mm, type of input current: three-phase, total width: 600 mm, total length: 700 mm, total height: 1,200 mm, Pastry Twisting Machine Universum HWM 30 Twisting Machine Universum Kasper Model: HWM 30 Pastry twisting machine, mobile for all types of pastries such as pretzels and lye sticks, etc. Universal twisting machine for all types of dough for twisting Stainless steel design Robust technology Connection 400V, 16A-CEE plug Dimensions approx.: 600 x 700 x 1200, WxDxH Used machine, refurbished with warranty Quality from a specialist company! Benefit from over 35 years of experience! Options: Conveyor belt EB Delivery service Service package Spare parts box for added security Maintenance contract Instruction and commissioning Come and visit us! Bdodpfxow U I Dxj Am Tof

Condition: used, Year of construction: 1994, machine/vehicle number: GA24, Used ROBINO & GALANDRINO Wirehooder record 10-2Technical Specifications & Performance DataThis Automatic Wirehooder is a compact, high-performance wirehood applicator designed for sparkling wine and premium beverage closures. Built for reliable operation on glass bottles, it delivers precise wirehood positioning and twisting for consistent, secure muselet application at industrial speeds.Machine type: Automatic Wirehooder (wirehood/muselet applicator)Model: Record 10/2Year of manufacture: 1994Refurbishment: Overhauled in 2017Production speed: 10,000 bphContainer material: Glass bottlesInfeed direction: ClockwiseWirehood magazine: High-capacity, long-autonomy designSupported wirehood styles: Collio, Collio light, Collina, Lia, Sile, Extra L, Valdobbiadene, Elegance, Artù, Piave, Monterossa, Cru, Magnum CollioAdvanced Automation & Control SystemsEngineered for stable, repeatable operation, this wirehooder features automated feeding and consistent torque application to protect cork integrity while ensuring firm cage tightening. The long-autonomy magazine reduces manual replenishment for improved uptime on a used bottling line or integrated second hand packaging cell. Operator-friendly controls support quick setup and process monitoring for efficient beverage production.Automated wirehood feeding with alignment and controlled twist applicationHigh-capacity magazine to extend runtime between reloadsOperator controls for speed and format parametersStandard safety interlocks and emergency stop circuitsProduction Line Integration CapabilitiesThis wirehooder integrates seamlessly downstream of a corking machine on glass bottling lines. It can function as a standalone module or as part of a synchronized industrial packaging line with upstream and downstream conveyors, accumulation, and inspection systems.Inline or standalone operation with conveyor interfacesDesigned for glass bottle handling in sparkling applicationsFormat changeover kits support various wirehood styles listed aboveSuitable for integration into complete bottling and beverage production linesMachine Condition & Maintenance HistoryThe unit was manufactured in 1994 and underwent a refurbishment in 2017, providing renewed reliability of key components and alignment systems. It is presented in good working order and ready for operation, ideal for facilities seeking robust second hand bottling equipment with proven performance.Operational Performance & VersatilityOptimized for sparkling closures, the machine handles a broad range of wirehood designs without compromising on application quality. Its high-speed performance supports commercial throughputs, while the magazine capacity helps maintain continuous operation and minimize changeover interruptions.Consistent cage placement and twist control for secure closureWide compatibility with premium wirehood styles for different brand aestheti... Bsdpfozmpzusx Am Todf

Year of construction: 2021, condition: ready for operation (used), overall weight: 9,300 kg, total width: 2,200 mm, total height: 2,130 mm, cutting length (max.): 3,080 mm, product length (max.): 3,920 mm, Hydraulic shearing machine manufactured in 2021. This KNUTH KHT H 3010 NC features a working length of 3080 mm and a throat depth of 150 mm. It includes a Cybelec Touch 8 control for optimal positioning of cutting gap, angle, and length. The robust backgauge and standard blades are suitable for stainless steel. If you are looking to get high-quality shearing capabilities, consider the KNUTH KHT H 3010 NC machine we have for sale. Contact us for further details. • Control: Cybelec Touch 8 (touchscreen) • Features: • Guided cutter bar with adjustable cutting angle for minimal twisting • Automatic optimization of cutting gap, cutting angle, and cutting length • Controlled backgauge with preloaded ball screw • Controlled kerf (cutting gap) adjustment • Controlled cutting angle adjustment • Blades/knife suitable for stainless steel • Robust, precise backgauge • Working area: • Working length: 3080 mm (maximum cutting length 3080 mm) Bjdpfx Amezgfhwo Todf • Throat depth: 150 mm • Cutting angle: 0.3°–2° • Strokes per minute: 17 H/min • Hold-down: 16 positions, 20 t capacity • Table size: 3340 mm x 520 mm x 875 mm • Backgauge: • Rear stop: 1000 mm • X-axis feed speed: 6000 mm/min • Front support arms: • Quantity: 3 • Length: 900 mm each • Cutting capacities: • 10 mm at 450 N/mm² • 6 mm at 700 N/mm² • Drive: • Main motor: 22 kW • Hydraulic tank: 350 l

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 08/2015, suspension: air, tire size: 385/55R22.5, wheelbase: 8,810 mm, color: blue, Year of construction: 2015, Axle configuration Tyre size: 385/55R22.5 Make axles: Valx Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Bsdpezf Ic Uefx Am Tsdf Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.800 kg Carrying capacity: 37.200 kg GVW: 41.000 kg Condition Technical condition: good Visual appearance: good Identification Registration number: ON-64-VV Additional information Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - EBS - Twist-locks = Remarks = 45 FT Only. Empty Weight: 3.800 KG!

Condition: refurbished (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 08/2027, working width: 300 mm, conveyor belt width: 320 mm, type of input current: three-phase, total width: 590 mm, total length: 680 mm, total height: 1,220 mm, TOP Pretzel Twisting Machine MK-Erka WMA 30 Wrapping band width 320 mm for all types of sticks, such as corn-topped pretzels and lye pretzels, stainless steel construction simple, robust technology! Connection: 400V, 16A-CEE plug Dimensions: 590 x 680 x 1220-1300 mm (W x L x H) Used machine, refurbished with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Optional: Bdsdpfx Amsw Tqkxo Tsf Maintenance contract Feeder E-box for increased safety Service package Delivery service Training & commissioning We offer a wide selection of twisting machines!

Condition: used, empty load weight: 6,385 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 11/2018, suspension: air, tire size: 385/65 R22,5, color: blue, Year of construction: 2018, mileage: 650,258 km, Equipment: ABS, Poids à vide: 6385kg, Poids total admissible: 38000kg, La taille du pneu: 385/65 R22.5, 1er essieu: , 2ème essieu: , 3ème essieu: , Suspension pneumatique, Dispositif anti- encastrement, Système de freinage électronique EBS, Porte-extincteur, Coffre à outils, Porte roue de secours, Anneaux d'arrimage Ferry, Toit coulissant, Compteur kms essieux, Fiche de raccordement 2x7 broches, Mines 12/2026. fixation Twist lock. -Disques de frein Essieu 1 38,5mmPlaquettes de frein Essieu 1 60 % usureDisques de frein Essieu 2 39,1mmPlaquettes de frein Essieu 2 50 % d'usureDisques de frein Essieu 3 43,1mmPlaquettes de frein Essieu 3 20 % dusure, Vous trouverez un aperçu de tous nos véhicules disponibles sur notre site web . Besoin d’un financement ? Nous proposons des financements individualisés, ainsi que du full-service ou un service télématique.Nous serons heureux de vous conseiller personnellement. Bedpfx Aeytimxem Tjdf

Condition: used, mileage: 761,569 km, power: 355 kW (482.67 HP), first registration: 04/2019, fuel type: diesel, empty load weight: 9,545 kg, maximum load weight: 13,535 kg, overall weight: 23,080 kg, axle configuration: 6x2, wheelbase: 4,800 mm, brakes: engine braking, color: black, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, soot filter, spoiler, traction control, trailer coupling, * German vehicle * Available in quantities of 2 * Condition: see photos * BDF swap body frame * BDF swap frame for 7.15 and 7.45 swap containers * Twist lock * Adjustable underrun protection * Tow hitch * Trailer load: 29,525 kg * Cab: Super Space Cab / Luxury cab with two seats & two beds * Auxiliary air conditioning * Refrigerator * Automatic climate control * Auxiliary heater * Automatic transmission * Differential lock * Engine brake * Lane keeping assist Bdsdpfxszh Hbbj Am Tjf * Multifunction steering wheel * Lane departure warning system * Hill start assist * Television * ABS/ASR/ESP * Tag axle with steering and lift/lower function * Full air suspension * Multifunction steering wheel * Cruise control * Suspended cab * Driver's comfort seat with air suspension * Seat heating * Center armrest * Power windows * Heated and electrically adjustable exterior mirrors * LED daytime running lights * Central locking with remote control * Fog lights * Alloy wheels * Work lights * Stereo CD player * Bluetooth phone * Storage compartments * Wheelbase: 4,800 mm * Permissible total weight: 23,080 kg - technically possible 26,500 kg * Unladen weight: 9,545 kg * Payload: 13,535 kg - technically possible 16,955 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer the possibility of inspecting and examining the goods so that the buyer does not have any false ideas about their condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired. All information is provided without guarantee. No liability is assumed for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods / vehicles. Subject to changes, prior sale and errors.

Condition: good (used), Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills -Manufacturer: Sassex, clip-on holders, 4 pieces -Recording: MK5 -Type/Sizes: see photos -Submission/Price: complete -Transport dimensions: 530/320/H60 mm -Weight: 18.4 kg Bdsdpfxezbiq To Am Tsf