Used Butt-End Reducer for sale (9,487)

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, input voltage: 400 V, nominal power (apparent): 45 kVA, electrical fuse: 15 A, working range: 50 mm, open-circuit voltage: 28 V, nominal power at 50% duty cycle: 45 kVA, We offer this refurbished IDEAL BAS 050-11 butt welding machine, year of construction 1998. Ndsdezudivjpfx Afwea type: BAS 050-11 serial number: 224085 year of manufacture: 1998 year nominal power at 50% ED: 45 kVA rated apparent power: 45 kVA no-load voltage: 28/44 V max upsetting force: 250 kN primary voltage: 400 V rated frequency: 50-60 Hz fuse rating: 15 A Bi-metal / carbide bandsaws: 6×0.6 – 34×1.1 mm Wood saw blades: 6×0.4 – 50×1.0 mm Stainless steel saw blades: 6×0.4 – 25×0.5 mm Strip blades: 6×0.4 – 30×0.6 mm If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), functionality: fully functional, automatic pipe end deburring in continuous process --- Pipe length max. 600 mm Max. pipe diameter 30 mm Ndedjzg Tfwjpfx Afwea Brush length approx. 450 mm Brush revolutions 2000 rpm 2 brush drive motors, 5.5 kW each

Condition: like new (used), Decription Absorption occurs through the attachment of molecules to the surface of the sieves according to Van Der Waal's principle of attraction. The structure of the molecular sieve is composed of adapted crystal pores capable of capturing and fixing molecules smaller than those of oxygen and nitrogen as well as CO2, humidity and hydrocarbons. The CO2 PUR is an air purifier designed to reduce the CO2 content and humidity of compressed air. The compressed air is first filtered and then passed through a molecular sieve (CMS), which eliminates humidity, CO2 and hydrocarbons (>àC7). Main characteristics Ndsdpfx Afsia Nd Hswoa * Residual CO2: less than 1 ppm * Humidity: -70° C dew point Apps The CLAIND air purifier has been designed to meet all the requirements of analytical laboratories, which require dry compressed air free of CO2. CO2 PUR was developed especially for the supply of IRTFs. Good working condition. Please check out our other listings as well.

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* Nsdpfx Afsxrb Tgjweda * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Year of construction: 1999, condition: used, End sheet tipping machine Hunkeler VEA 520 KS - HHS Nodpfx Aex Eblpsfwjda Year: 1999 Description: - Offline production - Photocell protection - Cold glue: HHS C-210 (nozzle) - Hotmelt - Premelter: Robatech Concept 4/2 - Inserting - End sheet tipping - Pressing station - Delivery Max. mechanical speed: up to 8.400 cycles/h Outside gluing max. size: 520 x 310 mm Outside gluing min. size: 100 x 70 mm Inside gluing (inserting) max. size: 360 x 260 mm

Condition: new, Year of construction: 2025, Butt Welding Machine Ndjdpfxstwfv Dj Afwea Technical Specifications: Model: KAB10 CE certified Operated: Foot Power at 50% ED 10kVA, Continuous power 7.1kVA Welding Capacity: Up to 8mm + 8mm mild steel wire Primary winding: Copper wire Secondary winding: Copper bar Core: Silicon steel EI core Mains Connection: 400V/50Hz Power Input Cable: 3m Protection Class: IP21 Space Requirement (W/L/H): 625mm x 600mm x 1035mm Weight: 90Kg Warranty: 1 years (+10 years spare parts support)

Condition: new, Year of construction: 2025, Butt Welding Machine Type KMB5 Ndsdeq Rga Sepfx Afwea CE certified Operated: Hand Power at 50% ED 5kVA, Continuous power 3.5kVA Welding Capacity: Up to 5mm + 5mm steel wire Primary winding: Copper wire Secondary winding: Copper bar Core: Silicon steel EI core Mains Connection: 220V/50Hz Power Input Cable: 3m Protection Class: IP21 Space Requirement (W/L/H): 300mm x 370mm x 275mm Weight: 38Kg Warranty: 1 years (+10 years spare parts support)

Condition: excellent (used), Gauge block connectors and universal holders System KOBA Z 101 Hommelwerke as a set in case (108149) Ndodpoylkdpsfx Afwsa

Condition: excellent (used), 1 set of reducing sleeves Ndedpfx Ajud Sliefwoa MK 5 to MK 4-3-2 (28538) Collection free of charge

Condition: excellent (used), Year of construction: 1995, As-new notching milling machine from a training workshop Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Ndedjyrh Rgspfx Afwea DE - 44143 Dortmund - Wambel / Germany

Condition: used, operating hours: 1,980 h, power: 103 kW (140.04 HP), gearing type: mechanical, fuel type: diesel, first registration: 05/2020, color: green, overall weight: 10,450 kg, mileage: 1,980 km, empty load weight: 6,900 kg, maximum load weight: 3,550 kg, suspension: other, number of seats: 2, Equipment: air conditioning, all wheel drive, cabin, Front hydraulics, 1st hand, radio, power steering, HU/AU new, AutoPowr transmission Diesel hydrostatic power steering All-wheel drive First registration 25.05.2020 103 kW 4,525 cm³ 1,980 operating hours Industrial front loader Front PTO Front hydraulics device Autotrac 360° illumination Cabin Cab suspension Suspended front axle Air conditioning Heating Command Arm Display in the A-pillar Radio 2-seater cup holder 40 km/h approval 1st hand Aluminum rims Empty weight 6,900 kg permissible weight 10,450 kg Hand Alloy rims Unladen weight 6,900 kg Gross vehicle weight 10,450 kg FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION ARE DECISIVE, THE PRICE IS SECOND. If you have any further questions, please do not hesitate to contact Mr. Faller on the following number. //*EXCHANGE, DEPOSIT OR RENTAL OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* You can find further offers on our homepage: The description and data given do not constitute a guarantee and are not binding. The contract of sale concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Ndedpfx Ajvic Drefwea

Year of construction: 2019, condition: new, functionality: fully functional, Root reducer – new (in storage) consisting of: 1. Tapered roller conveyor Plant data: Wood lengths: 2 m to 4.6 m (main length: 2.7 m), extendable to 8 m (optional, at an extra charge) Log diameter: 200 mm to 1,100 mm Wood types: Softwood or hardwood, max. individual log weight 2 tons Piece rate: up to 5 pieces/minute, of which with root reduction: up to 2 pieces Operation: 1-shift operation Dimensions: Length: approx. 5 m Roller width: 800 mm Description: Tapered roller conveyor for roundwood with housing bearing (nominal diameter: 60 mm); Outer diameter of the tapered rollers: 450 mm; drive chain: roller chain 5/4"; integrated 4-arm, hydraulic lifting device for transferring to the root reducer, steel housing plain bearing; drive of the tapered roller conveyor via gear motor with reduction gearbox and soft start; integrated light barriers (2 pieces) for log positioning 2. Root reducer Dimensions: Length: approx. 7 m Description: - 3 driven chain beds, drive chain: roller chain 6/4" with square tooth attachment - Drive via gear motor - 2 support blocks with non-driven rollers (roller bearing) Ndjdszcaqtopfx Afwoa - hydraulically pivoting clamping device for clamping from above with V-bed - Drive chain: roller chain 6/4", drive via gear motor; - housing-mounted milling shaft with reversible, interchangeable knife blocks (4 cutting edges per knife block), drive via three-phase motor (drive power: 75 kW; flexible tire coupling) - Star-delta operation for the drive motor (energy-saving mode for idle operation - automatic switchover during the reduction process) - Milling shaft length: 1,200 mm, mounted on a rotatably supported, adjustable drive rocker (hydraulic drive) - 4-arm lifting device, hydraulically driven - integrated hydraulic unit (15 kW) - integrated log diameter measurement for automatic milling time calculation (control unit included in item 2), for wood lengths under 3.5 m, the support position of the log must be adjusted (reduced reduction length) Reduction length for log length of 2.7 m: 0.7 m, for log length of 3 m: 0.9 m 3. Control system - Control cabinets in grounded design, equipped with control units for all drives of items 1 and 2, - Power supply: 3x400 VAC; Rittal control cabinet; motor contactors and contactors from Siemens - Freely programmable controller Bernegger & Rainer - Control cabinets completely wired and tested - Reserve slots for approx. 5 drives - Circuit diagram for the system - Signal exchange via potential-free contacts - Emergency stop system; including necessary sensors; manual operation option Control function description: - Automatic reduction operation, for log lengths under 3.5 m, an adjustment of the support position (wood alignment) is required (reduced reduction length) - Automatic log positioning via the tapered roller conveyor, the reduction process must be activated manually (reduction command) Price: ex works

Condition: new, Year of construction: 2024, workpiece weight (max.): 12 kg, - Weight approx. 11.8 kg - CNC manufactured from A 600, anodized surface - Working range up to 506 mm diameter Ndjdpfxeri Sice Afwoa - No additional material movements, saving crane capacity, man hours and energy energy are saved If machines are in use, you have to crane to the machine and then back again to the picking area - the time lost for 2 centering holes alone is immense. - Ready for use in seconds - Stepless clamping, 3 diameter ranges - Produce a centering hole in seconds (directly after sawing on the machine) - All components are manufactured in Germany - Centering Din 333 Form A, 60°, 5, 6.3 and 8 mm. Other requests are also possible. A "must have" for every steel dealer! - Selling price: 5.950,- EUR net plus VAT ex stock, freight free within Germany - Scope of delivery: Fixture, Fein cordless drill, charger, - 2 rechargeable batteries - complete in case - 3 centering drills 5, 6.3 and 8 mm Din 333 A with surface, incl. 3 holders, one 6 m

Condition: new, Year of construction: 2025, functionality: fully functional, Simply Center Punch – The Center Marking Aid! A revolution in precision: We present the “Simply Center Punch” The world's only center marking device – an exclusive innovation from Northern Germany. The Problem No more inaccurate center marking of round parts - Are you familiar with the challenges of precisely center punching shafts or rods ranging from 15 mm up to 400 mm? - Inaccurate positioning. - Poor lighting conditions - No glasses for older users - Time-consuming manual alignment - Inefficient and error-prone processes - The market does not offer a universal and reliable solution for varying diameters. Our Solution: Simply Center Punch – A World First! Simply Center Punch: Precision made simple. - Globally unique: A center punch device / center marking aid developed and utility model protected by us, setting new industry standards. - 100% in-house development: From the first concept to the finished product – all from a single source. - Manufactured in-house: We guarantee quality "Made in Germany." - Versatile use: For diameters from 15 mm to 400 mm. - Center marking at the push of a button: Simply position, turn the handle, and mark the center. Ndedpsxb Ucaefx Afwoa Your Advantages at a Glance Your benefits. - Maximum precision: Centers drill holes and markings with accuracy up to 0.3 mm. - Saves time and money: Speeds up your workflow and reduces rework. - Effortless handling: Intuitive operation requiring no prior experience. – Weight just 780 g. - Universally applicable: One tool for nearly all diameters in mechanical engineering, metalworking, etc. - Robust and durable: Made from high-quality materials for professional, continuous use.

Condition: like new (used), Year of construction: 2020, - 2 pneumatic clamps - Mist lubrication system - depth adjustment - 400V Ndsdpfx Asr Iiimjfwea

Condition: new, Semi-automatic chamfering machine Developed and manufactured in England - Automatic chuck with material sensor - Automatic spindle start when the cutting head moves - Bar diameter 26-105 mm A second cutting head is required for smaller diameters - Adjustable bar support - Max. chamfering/turning length 45 mm - Turning and chamfering tool - Precision three-jaw chuck - Large chip collection container for easy cleaning - Can be easily moved with a pallet truck - Weight approx. 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty Nedpfegkah Tsx Afweda CE certified OPTION: - Adjustable stop + universal chamfering tool €1,990,-

Year of construction: 2000, condition: good (used), Offered for sale from an insolvency proceeding is a tube end machining machine. Manufacturer unknown Model: ?? Year of manufacture: ?? Machine number: ?? Technical data: Njdpfjfynfwsx Afwsda Operated with compressed air Tube diameter up to 401 mm possible Accessories as shown in the picture

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, PROFILATRICE COMAL PRD 12 Automatic edging machine for strip end processing. Used to prepare strip edges for subsequent roll forming. The machine is equipped with a set of rollers capable of performing cold roll forming of strips and sheets, which are continuously shaped until the desired profile or tube is achieved. Ndjdpfxsxdr Sws Afwoa The machine has seen very little use, is fully operational, and is in good overall condition. Manual and original documentation are available.

Year of construction: 2003, operating hours: 4 h, condition: like new (used), functionality: fully functional, Reducer, Bonfiglioli, gear ratio 1:720. Nedpfxozkvbcs Afwjda Used for a technical test lasting 4 hours.

Condition: good (used), Year of construction: 2024, Year of manufacture: 2024 3D AOI inspection system with intelligent DLP projection Ndjdpfx Ajyw Nxwjfwsa 1 x AOI database structure Web Apache server 1 x teaching station (offline programming) 1 x verification station (verification or repair station) 1 x Q-up (analysis station) 1 x administrative interface for AOI management PCB thickness: 0.4-4 mm PCB weight: up to 4 kg PCB warp: +/- 10 mm Compressed air: 0.3x0.6 Mpyi, 10 l/min Lighting: RGB color high-light method 2D camera and 3D measurement Resolution: telecentric lens with 15µ + 4 side cameras with 10µ each Height measurement up to 25 mm PCB size: 50x50 – 510x460 mm Component clearance: top 40 mm, bottom 40 mm

Condition: good (used), for oxygen, high-pressure side: 0 - 400 bar low-pressure side: 0 - 40 bar including connection nipple for oxygen cylinders Njdpfxsdq Hvyj Afwjda

Year of construction: 1987, condition: good (used), for cutter Ø up to max .: 300 mm Njdpjghl Emofx Afwoda Saw stroke adjustable by hand: 550 mm Infeed by hand via spindle: 150 mm Height adjustment by hand via spindle approx .: 130 mm Table semicircle Ø: 500 mm Saw blade drive: 380 V, 2.2 kW Saw blade speed: 2700 rpm Space requirement approx .: 1000 x 900 x 1300 mm Weight approx .: 100 kg

Year of construction: 1998, condition: good (used), Manufacturer unknown Year of manufacture: unknown Ndjdpfef Axiljx Afwoa TRAV H/2830 The Aro Corporation, Model 78051BSN Technical specifications: Pneumatically operated For internal milling operations, 50-225mm Accessories as shown in the picture

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: D30L/7913, Offer Number: D30L/7913 Machinetype: spring end grinding machine Ndjdjwi Szrjpfx Afwja Make: WAFIOS Type: FEL3 Constr. year: 1980 wire diameter: 2-10 mm spring diameter: 120 mm legth of springs: 10 - 240 mm Location: In our warehouse

Year of construction: 1972, condition: used, This machine is 3x available. Data: Manufacturer: Landis Type: FRM 50 E-8 Year of manufacture: 1972 

quill travel: approx. 100mm

 Distance between spindles in retracted position: approx. 550mm Workpiece diameter max.: 75mm travel: per unit 200mm Nodpsg Umitsfx Afwjda 3 drive powers:
 8,5kW/ 750 1/min 12kW/ 1450 1/min 18kW/ 2960 1/min Remark: the machine is equipped for ø20 and 65mm long Accessories: with magazine