Used Cordia Dotn-150 for sale (9,999)

Condition: new, empty load weight: 118 kg, maximum load weight: 632 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 1,475 mm, loading space width: 1,063 mm, loading space height: 700 mm, tire size: 155/70 R13, Year of construction: 2024, operation weight: 750 kg, Car trailer New Garden Trailer 150 KIPP with additional drop sides, support wheel and gray flat cover New Garden Trailer 150 KIPP trailer from UNITRAILER with a GVW of up to 750 kg has a hinged rear dropside so that loading and unloading is possible in just a few minutes! By using a tiltable drawbar, it can be positioned vertically anywhere on the rear dropside. All formalities in connection with the purchase are taken care of for you. The ordered goods with enclosed documentation will be delivered to the address you specify in Germany/Austria within 6 to 8 working days. Once you have received the car trailer, all you have to do is register it. Advantages of a Garden Trailer 150 KIPP car trailer Fjdot Id Skepfx Aayepl If you decide to purchase our new car trailer, you will receive a 2-year warranty. Each product comes with a user manual and a warranty booklet. All the most important documents come with the purchased trailer. In addition, you can purchase accessories in the form of drop sides, support wheels or anti-theft protection at any time. If you have any questions or doubts while using the car trailer, you can contact our specialists at any time. You can also use the tiltable drawbar to tilt your car trailer. This makes loading and unloading goods that you would normally have to lift or lower much more convenient. This solution is also most commonly found on more expensive car trailers, which contributes significantly to a better user experience. Another advantage of this solution is that the car trailer can be stored vertically, with the folded drawbar resting on the rear dropside. So you don't have to worry about the trailer taking up a lot of space in your garage or not fitting because of the protruding drawbar. You can even put it on the front of the building or wherever you want!

Condition: used, Gear motor, electric motor -Speed: 150 rpm -Power: 0.135 kW -Construction: B14 -Shaft diameter: Ø 12 mm -Protection class: Fpsdpfxedac D Ne Aayel -Price: per piece -Number: 4x available -Dimensions: 270/110/H145 mm -Weight: 3.9 kg

Condition: good (used), bench vice, metalworker's vice, parallel vice -Jaw width: 150 mm -Wingspan: 200 mm -Number: 2x vices available -Price: per piece Fpedpfxeddfh Ej Aayjl -Dimensions: 490/340/H195 mm -Weight: 27 kg

Condition: excellent (used), Year of construction: 2014, operating hours: 271 h, functionality: fully functional, machine/vehicle number: 639074, overall weight: 1,111 kg, load capacity: 150 kg, arm reach: 2,696 mm, This is a KUKA KR 150 R2700 extra F industrial robot with KRC4 control system, manufactured in 2014. We would also be happy to offer this robot as a fully refurbished unit! The control system includes the following options: BoardPackage Fpsdpfxjzl Aqto Aayol EthernetKRL LoadDataDetermination Profinet KRC-Nexxt RemoteService SafeOperation UserTech

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 150 350, total height: 4,600 mm, ram adjustment: 150 mm, installation height: 550 mm, table height: 1,000 mm, total width: 3,000 mm, total length: 4,200 mm, drop-through hole in table: 1,400 mm, table length: 3,000 mm, table width: 1,250 mm, pressing force: 250 t, control cabinet height: 2,000 mm, control cabinet length: 6,800 mm, control cabinet width: 600 mm, type of input current: three-phase, stroke length: 180 mm, stroke adjustment: 20 mm, input voltage: 400 V, distance between side stands: 810 mm, distance between stands: 2,020 mm, overall weight: 45,000 kg, control voltage: 24 V, year of last overhaul: 2026, input frequency: 50 Hz, ATTENTION: The machine will be completely cleaned before delivery. Fairings will be repaired if possible and deemed appropriate. Pressing force: 2500 kN Fpjdpfxezrwzae Aaysl Adjustable stroke: 40 - 180 mm Ram adjustment: 150 mm Stroke rate: 20 - 150/min Installation height for tool: 550 mm Table dimensions: 2000 x 1250 mm Ram dimensions: 2000 x 1000 mm New control system: SIEMENS S7 300, 1st generation, control system designed according to VW specifications. Upon request, the machine can also be completely overhauled by ANDRITZ Kaiser, with a new S7 1500 control system.

Condition: new, 2 Michaelis control units. Fsdpfx Aezaalreayjpl

Condition: excellent (used), functionality: fully functional, Used Maguire plastic drying units are for sale. This listing includes a total of 13 units, with the option to purchase individual units or a larger package. Available are Low Pressure Dryer and Vacuum Batch Dryer / vertical dryer models. Condition as shown in the photos. Price depends on the selected unit and quantity. These dryers are designed for drying plastic granules. The units are used, and their technical and visual condition corresponds to the photos. Additional photos of a specific dryer can be provided upon request. Available units: No. Designation Type / model as shown in the photos 1 D067 Maguire Low Pressure Dryer, model LPD2HE4 2 D049 Maguire Low Pressure Dryer, model LPD1HE4 3 D084 Maguire Low Pressure Dryer 4 D099 Maguire Low Pressure Dryer, model LPD1HE4 5 D054 Maguire Low Pressure Dryer, model LPD1HE4 6 D051 Maguire Low Pressure Dryer, model LPD1HE4 Fedjzc D Ebspfx Aayopl 7 D065 Maguire Low Pressure Dryer, model LPD1HE4 8 D071 Maguire Low Pressure Dryer, model LPD1HE4 9 D068 Maguire Low Pressure Dryer, model LPD2HE4 10 D076 Maguire Vacuum Batch Dryer, model VBD-150 11 D081 Maguire Vacuum Batch Dryer, model VB-150 12 D089 Maguire Vacuum Batch Dryer, model VB-150 13 D091 Maguire Vacuum Batch Dryer, model VB-150

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 71400, For sale is a RÖSLER Rotomatic R 150/15 SE, including a separation station, conveying technology, control cabinet, and control system. This unit comes from our ongoing production facility and was dismantled solely due to a plant upgrade. Fjdpfx Aaszizu Esyspl The unit is fully functional, ready for immediate use, and can be inspected and demonstrated in operational condition by appointment. Technical data Manufacturer: RÖSLER Oberflächentechnik GmbH Model: Rotomatic R 150/15 SE Machine type: Continuous belt grinding machine Year of manufacture: 2016 Serial number: 71400 Working channel length: 15 m Total power: 17 kW Main drive: 12.5 kW Equipment Complete system including: Rotomatic R 150/15 SE Separation station Workpiece conveyor belt Grinding media return system Control cabinet with PLC control Pneumatic and process water technology Automatic continuous operation Integrated workpiece/grinding media separation Variable processing time Designed for continuous industrial operation Application areas Ideally suited for: Deburring Rounding Smoothing Cleaning Surface finishing Belt grinding of mass-produced parts Suitable for workpieces made of: Steel Stainless steel Aluminum Brass Zinc die casting Sintered and stamped parts The Rotomatic is particularly suitable for the continuous processing of large quantities and can be easily integrated into automated production lines. The Rotomatic principle ensures that sensitive workpieces are processed particularly gently and according to the first-in-first-out principle.

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 001, Equipment: CE marking, DEKCEL 150 W Industrial CO₂ Laser – Usable Area: 2,650 x 1,450 mm – Complete equipment ready for production Price: €7,500 + VAT For sale: a DEKCEL 150 W industrial CO₂ laser cutting and engraving machine, currently in operation at our facilities and available for demonstration before disassembly. The machine is being sold exclusively due to a technological upgrade following the introduction of new, state-of-the-art RF laser equipment. Equipped with a Ruida DSP industrial controller, RDWorks software, and a fully configured computer, it is ready to start working from day one. It features a large usable working area of 2,650 x 1,450 mm, ideal for machining entire sheets of MDF, HDF, plywood, acrylic, cardboard, leather, foam, rubber, and other non-metallic materials. The machine incorporates a fully operational 150 W RECI laser tube and also comes with a second, brand-new 150 W RECI laser tube, providing the buyer with significant savings on future maintenance costs. The price includes: Fodpfxjzmqaxo Aayspl • DEKCEL 150 W industrial laser machine. • Usable working area: 2,650 x 1,450 mm. • Ruida DSP industrial controller. • Computer with RDWorks installed and configured. • CW-5200 industrial chiller. • Installed and operational RECI 150 W laser tube. • New spare RECI 150 W laser tube. • Complete new optical head. • Two spare high-voltage power supplies. • Three industrial fume extractors. • New cable carrier chain. • Various additional spare parts. The machine can be seen in operation before disassembly, allowing you to verify its performance, precision, and cutting quality. An excellent opportunity to acquire a large-format industrial machine that is fully operational and comes with a significant set of accessories and spare parts, ready to continue production from day one. _____ This is not just a used machine; it is delivered as a complete industrial system with strategic spare parts included, which minimizes maintenance costs and ensures quick start-up.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, ABB Robotics IRB 6400R 2.5-150 M99 robot, complete, with Profibus Controller: S4C M99 Number of axes: 6 Max. payload: 150 kg Max. working range: approx. 2500 mm Year of manufacture: 2002 Serial number: 64-17912 Scope of delivery: Robot, controller, cables, teach pendant, operating manual, wiring diagrams Used item – normal signs of wear and tear. Further details, article numbers and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Fsdpfezmtiiex Aayepl Shipping costs to foreign countries upon request – please specify country, city and postal code. Freight costs upon request – please specify delivery address.

Condition: excellent (used), 4 kW motor, feed unit, cutting height 9 cm, passage height 125 cm, table length 157 cm. Fodpfxjy S U D Uo Aayopl

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir -Hydraulic pump: Pressure up to 150 bar -Flow rate: 42 l/min -Motor: Lammers 4.0 kW / 1440 rpm -Hydraulic reservoir: with filter and temperature/level indicator Fpodpezbhdlofx Aayel -Individual components: see photos -Dimensions: 630/520/H960 mm -Weight: 206 kg

Condition: used, 1 cylindrical, vertical stainless steel tank, used Capacity: 150 cbm Order number: 4326 Material: V2A Internal weld seams ground smooth for food contact Dimensions: 3,400 mm internal diameter 3,600 mm external diameter 16,500 mm cylindrical height 800 mm upper bottom Approx. 17,300 mm overall height Design: Cylindrical, vertical with a lower, inwardly curved conical bottom, supported by concrete with an upper conical bottom Propeller agitator in the cylinder at the bottom, installed at an angle, 15 kW, 960/min Insulation around the cylinder and upper bottom Cover completely welded Connections: 1 manhole 320 x 420 in the cylinder Vent Ø600 mm with hood in the upper bottom with a spray head, removable Condensate line drawn down laterally CIP line DN 65 drawn down laterally to operating height, tapering to DN 40 1 cable duct Ø25 drawn down to operating height as well as a measuring connection in the upper bottom 1 x measuring connection 1 x DRD flange Fpedey Atvqopfx Aayol 1 x sampling point in the cover Outlet at the lowest point DN 100

Condition: new, width of the strips 150 mm band length 2000 mm band speed 16,5/33 m/sec total power requirement 2,6/3,37 kW turning speeds 1400/2800 U/min weight of the machine ca. 95 kg Equipment / Accessories: - Removable dust catcher - Fine adjustment of the band adjustment Fpjdpfoyv Nb Nex Aayjl - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad

Condition: new, functionality: fully functional, empty load weight: 106 kg, maximum load weight: 644 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 1,470 mm, loading space width: 1,060 mm, loading space height: 300 mm, total length: 2,360 mm, total width: 1,490 mm, total height: 800 mm, maximum speed: 100 km/h, trailer brake: trailer unbraked, Year of construction: 2026, Martz Basic 150 Tipper NEW VEHICLE Internal dimensions: 147cm x 106cm Total weight: 750 Kg Payload: 644 Kg Side panel height: 30cm Unbraked, single-axle, low-loader trailer Side panels made of galvanized sheet steel Rear side panel can be folded down and removed Easy conversion Bolted and galvanized steel frame Drawbar can be folded down Screen-printed wood floor 13-pole electrical system Rear lamps with reversing light and triangular reflectors Plastic mudguards Support wheel 13-inch M+S tires Vehicle can be placed on the rear panel for storage Optional accessories: - 100 km/h upgrade - Rear supports - Mesh superstructure - Extension side panels 40cm - Aluminum cover with bracket for e.g. bicycle carrier Fpedpfszk Hb Hex Aayol - Flat cover with or without frame - High cover 80cm - Coarse or fine mesh net - Spare wheel with bracket - Ramps Further accessories available upon request! Pictures are for illustrative purposes and may show optional accessories that incur additional costs. Plus vehicle registration document and freight to Gera 100 € net. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate pick-up. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist in axle repairs, also for caravan trailers. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come directly to us.

Condition: good (used), Clamping angle, clamping aid Fjdpfx Aasy Iwp Esyjpl -Clamping angle: for workpiece clamping -Wall thickness: 31 mm -Dimensions: 265/150/H200 mm -Weight: 18.7 kg

Condition: good (used), Year of construction: 2014, functionality: fully functional, For sale is a used Siat L36-150 TC-CE adhesive tape printing machine, manufactured in 2014. The machine is in good condition and fully functional. This machine was operated in our facility together with a dust extraction system, which is also to be sold: Manufacturer / Model: Siat L36 150 TC CE Year of manufacture: 2014 Condition: used, good Function: functional Application: printing adhesive tape CE marking: present Dust extraction system: FILTERBLOC CARBO-2000 ATEX (new, from 2023) We prefer to sell the machine as a complete package including the dust extraction system. The machine can be inspected by arrangement. Further technical data and photos are available upon request. Fpodpoza Synofx Aaysl

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input voltage: 400 V, empty load weight: 50 kg, input frequency: 50 Hz, Tool tempering heating: 9 kW. Temperature: 150°C. Fodszab A Espfx Aayjpl

Condition: used, Year of construction: 2012, functionality: fully functional, operating hours: 9,750 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 150 t, stroke length: 215 mm, ram plate length: 4,100 mm, overall weight: 11,600 kg, We offer a high-quality Bystronic XPERT 150/4100 CNC hydraulic press brake, built in 2012, designed for the precise bending of medium to large sheet metal parts. The machine is supplied including tooling, making it immediately ready for operation. ✅ Excellent technical condition ✅ High bending precision ✅ Includes tooling Availability: Q3 2026 Inspection: The machine can be inspected under power by appointment. Fedpezfpnfsfx Aayspl

Condition: excellent (used), Year of construction: 2016, Reforming Tool type WT/NFW Diameter 150 mm Weight 16.9 Kg Steel 400 N/mm2 = 6,0 mm Inox 600 N/mm2 = 6,0 mm Aluminium 250 N/mm2 = 6,0 mm For finish forming and calibrating of preformed components. It consists of a tool carrier WT 80 S and forming inserts N NFW 102 The forming inserts NFW in steel quality are designed for one single radius and one single thickness of material only. Different forming inserts can be put into the same Fjdpfx Aszcxzqjayepl tool carrier WT 80 S. But with one set of forming inserts only one single radius in one single thickness of material can be reformed. Inserts are available different shapes

Condition: ready for operation (used), Year of construction: 2003, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 190332, clamping force: 1,000 kN, injection weight: 15 g, ejector force: 66,000 N, ejector stroke: 225 mm, plate length: 795 mm, No reserve price – guaranteed sale to the highest bidder! Auction of a 3-color injection molding machine! TECHNICAL DETAILS Clamping force: 1,000 kN Tie bar spacing: 420 x 420 mm Mounting platens: 795 x 795 mm Mold height: 300 mm Maximum platen distance: 950 mm Ejector stroke: 225 mm Ejector force: 66 kN Injection Unit 1 (150 series) Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 2 (150 series) Fpsdpfxey Hki Ao Aayol Screw diameter: 15 mm Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,750 bar Injection Unit 3 (60 series) Screw diameter: 15 mm (high abrasion resistant) Injection volume: 17 cm³ Shot weight: 15 g Injection pressure: 2,080 bar MACHINE DETAILS Control system: Selogica Clamping unit: hydraulic Operating hours: 21,200 h FEATURES 1 vertical injection unit, mounted on supports for the 2nd injection unit instead of on the clamping unit tie bars, manually operated, working position adjustable between 70 and 250 mm 2 x core pull Open nozzle 15 mm wear-resistant, without heating band (1st injection unit 150) Technology level 2 – servo-regulated hydraulic system with two variable displacement pumps Technology level 3 hydraulic system with three variable displacement pumps for simultaneous movements Heating band for open nozzle Injection unit 150 for vertical injection into the mold parting line for 2-component processing Position-regulated screw with control valve on the injection unit, including regulated back pressure Position-regulated screw with control valve for multi-component machines – for injection unit 2 Injection unit 60 for horizontal injection into the mold parting line as the 3rd injection unit For VE 906/00, injection unit 60 in L-position: unit lowered by 70 mm Plasticizing cylinder assembly 15 mm (without nozzle), with advanced feed and pressure reducing valve Open nozzle 15 mm wear-resistant, without heating band (L-position) Nozzle tip with radius 15 (L-position) Heating band for open nozzle (L-position) Position-regulated screw for the third injection unit Documentation/manual

Condition: used, Year of construction: 2006, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, grinding height: 150 mm, input frequency: 50 Hz, - Year of manufacture: 2006 - In stock - After technical inspection - CE certified TECHNICAL SPECIFICATIONS: - Working height: 150 mm - Sanding belt dimensions: 150 x 2150 mm - Two sanding belt speeds - Table dimensions: 22 x 144 cm - Both tables adjustable at an angle within the range of 0-30 degrees - Motor power: 3.5 kW / 4.5 HP - Pneumatic belt tensioning and oscillation - Adjustable platen for sanding veneer on one side and a "back" of 15x75 cm on the other Fpodpfx Aaezinpcsyol - Attachment, protractor for angle sanding - Additional table for profile sanding - Dust extraction port: diameter 140 mm - Overall dimensions: 144 x 71 x 130 cm (length x width x height) - Weight: approx. 450 kg

Condition: excellent (used), RS Simulators Here we offer a temperature test chamber. Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Time deviation: ±1 K according to DIN 50011 in an empty test chamber Fpodszd Sfqjpfx Aaysl Average heating time: approx. 3 K/min (according to DIN 50011 Part 12) Average cooling time: approx. 3 K/min (according to DIN 50011 Part 12) Test chamber dimensions: Width 530 mm x Height 530 mm x Depth 530 mm External dimensions: Width approx. 900 mm x Height approx. 1800 mm x Depth approx. 1400 mm Total power: approx. 6 kVA Current consumption: 12 A Main fuse: 3 x 16 A, slow-blow Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 600 kg Type: TS 150/75 Refrigerant: R404A / R23 Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), functionality: fully functional, CNC FLOOR TYPE BORING MACHINE MAKE TITAN MOD. AF 150 SPINDLE SIZE 150MM, ISO 50 X TRAVEL 3000MM Y TRAVEL 2000MM W TRAVEL 800MM ROTARY TABLE 2000 X 1700 MM ROTRARY TABLE TRAVEL 1000MM Fedpfx Aaeztq Ayeyopl LOADING CAPACITY ON TABLE 15 TON CNC NUM

Condition: reconditioned (used), Year of construction: 2016, Technical specifications: Product number V-VC 150 Year of manufacture 2016 Engine power 3 kW Capacity 150 m3/h Maximum vacuum 1.1 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 90 kg Dimensions [h x l x w] 7011 x 281 x 310 mm The pump achieves a vacuum of 1.1 mbar, as confirmed by the measurement on the sensor in the video attached below. Fsdpfxszvrnio Aayjpl After oil service New oil New exhaust separators Oil-sealed vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are divided according to their operating principle into: volumetric, flow, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with a given pump), pumping speed and its dependence on pressure, capacity (usually measured in m3 of gas pumped per unit of time).