Used Dalex Drf 4 for sale (59,118)

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 808, The machine is designed for straightening and cutting wire with a diameter of 4-10 mm and a tensile strength of 400-700 N/mm2, using appropriate straightening and cutting tools. The maximum length of the cut wire is 3000 mm. Wire coil: maximum coil weight 1500 kg, maximum coil height 1000 mm, internal coil diameter 450 mm. The total length of the machine, including the wire unwinder, is approximately 10 m. Dwodezy Et Tjpfx Aggob Machine weight: 8 tons. Location: In our workshop.

Year of construction: 2024, condition: new, functionality: unexamined, This is an ATEX-certified filling machine with 4 dispensing nozzles, suitable for standard 10L containers. Dodpfx Aezxruboggewb It features load cells, allowing each container to be filled with a pre-set weight. The machine was purchased in 2024 but has never been used by us. It is still new in its original packaging. Brand: Boloni.

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 12020, Fanuc 21i TB control 3 jaw SMW chuck 720mm swing 2000mm between centres 8 station turret Coolant pump and tank Dodpezaix Ijfx Aggjwb Swarf conveyor

Condition: used, functionality: fully functional, machine/vehicle number: A11300181, Year of construction: 2009, operating hours: 23,737 h, load capacity: 45,000 kg, lifting height: 15,100 mm, fuel type: diesel, empty load weight: 67,900 kg, drive type: Diesel, Vollcontainer Reachstacker Chassis Number: A11300181 Dwedpfx Agozv Amiogeb Transmission: Dana TE32 Condition: Ready for operation and fully functional Technical Condition: Good Front Tyre Type: Pneumatic Rear Tyre Type: Pneumatic Description:

Condition: used, mileage: 552,000 km, power: 309 kW (420.12 HP), first registration: 06/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * MAN TGS 18.420 4x2 BLS semi-trailer tractor for the transport of dangerous goods * ADR FL/AT * Euro 6c * Automatic transmission * MAN Brakematic * ACC (Adaptive Cruise Control) * LGS (Lane Guard System) * Collision warning system * Blind spot warning system * Leaf-spring air suspension * Aluminum rims * Auxiliary air conditioning * Auxiliary heater * Automatic climate control Dsdpszx I S Nofx Aggjwb * Refrigerator compartment * Seat heating * EFH (Electronic Fall Protection System)

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 20,736 h, load capacity: 10,000 kg, lifting height: 16,200 mm, fuel type: diesel, power: 185 kW (251.53 HP), empty load weight: 40,100 kg, drive type: Diesel, Empty Container Reachstacker Chassis number: 0 Load center: 1220 Condition: Ready for operation and fully functional Technical condition: good Front tire type: pneumatic Rear tire type: pneumatic Description: Djdpozv Alfefx Aggowb Central lubrication system, reversing camera

Condition: like new (used), functionality: fully functional, Tool milling machine Deckel FP 4 MK Dwedpfx Aezvxlheggeb Type 2203 Equipped with a hydraulic tool clamping system and central lubrication.

Condition: used, mileage: 551,066 km, power: 320 kW (435.08 HP), first registration: 06/2016, fuel type: diesel, overall weight: 27,000 kg, axle configuration: 3 axles, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, parking heater, Leasing or hire purchase available, subject to a credit check. We are happy to provide you with an offer, including for business start-ups. CF 440 FAN ADR: FL, OX, AT, EXII, EXIII Engine, Transmission: Dwedpfx Agey A Uv Ejgeb * Engine: MX-11, 320 kW, 10,837 cc, Euro 6 * Transmission: 12A2130, automatic Assistance systems: * MX Engine Brake * Differential lock * Cruise control * Lane assist * Distance control * Hill holder (hill start assist) Chassis, Equipment: * Axle configuration: 6 x 2 *4 * Rear trailing axle steerable and liftable * Wheelbase 4,200 mm + * Leaf/air suspension * Front axle 8,000 kg * 1 aluminum tank 335 l * Ringfeder coupling * DuoMatic * Electric battery master switch * AdBlue * Power take-off (PTO) Tyres: * Size: 385/65 (see photos for condition) * Alloy rims Superstructure: * Chassis Cab: * CF * Air conditioning * Auxiliary heating (parking heater) * Electric and heated mirrors * Electric windows * Air-suspended and heated driver’s seat * Fixed co-driver seat * 1 bunk * Cool box * Roof hatch * Central locking with remote control * Sun visor * Fog lights * Radio Vehicle No.: 6897 Sale only to commercial customers or for export. All prices are net plus VAT or for export. Details without guarantee. PARLIAMO ITALIANO, GOWORIM PO RUSSKI, DOMLUVIME SE CESKY, WE SPEAK ENGLISH

Condition: used, Year of construction: 2016, For sale Duplo 746 Cutter creaser. Year 2016 Top Spec with extra optional Modules includes: CPM-04 RTM-04 Current product, fully supported by Duplo offering support, Supply of spare parts and supported! 1 owner from new, Previous client paid 90K new!! Very nice condition. These new cost £90k Plus, Machine is in stock in my warehouse. Inspecting and testing welcome in Tadley Reading. The Duplo DC-746 Cutter Creaser is Duplo’s most powerful and versatile slitter, cutter, and creaser, designed to handle high-volume production with precision and speed. Ideal for applications like business cards, brochures, and intricate direct mail pieces, it streamlines complex finishing tasks in a single pass. With advanced features, including a high-capacity feeder, automated setup for up to 30 jobs, and lightning-fast speeds of up to 50 sheets per minute, the DC-746 ensures maximum productivity. Its enhanced feeding mechanism supports a wide range of paper types, delivering unparalleled accuracy even for digital stocks prone to curl or static. The DC-746 is expandable with optional modules for rotary perforating and cross-perforating, making it a perfect choice for PSPs looking to increase efficiency, reduce manual intervention, and produce premium-quality finished products. Specification and Features Machine Dimensions W 3040mm x D 870mm x H 1730mm (with PC) Automated Set-up From barcode In-feed Paper Size Min: 210mm x 210mm Max: 370mm x 670mm Creases Max. 20 per sheet Cuts Max. 30 cuts per sheet Slits Six (standard) (8 with options fitted) Ideal for Business cards Folded flyers Dwedpfozx Htfex Aggeb Tickets Perforated vouvhers

Condition: excellent (used), Year of construction: 2024, SPX Waukesha 034-U2 Lobe pump Dwodezzf Iyjpfx Aggsb 2024, port size 2 inch, up to 24 GPM (5.5 m3/hr), displacement 0.227 liters per revolution, never been into production

Condition: good (used), machine/vehicle number: 3568, Year of construction: 2011, load capacity: 45,000 kg, lifting height: 14,900 mm, mast type: telescopic, total length: 12,000 mm, total width: 4,260 mm, operation weight: 86,000 kg, additional equipment features: Automatic Greasing System for spreader and inner boom, Hydraulic sliding cabin, 20-40ft piggy-back spreader, Dual tread, Centralized greasing system, Kalmar DRF450-70S5X from Uniktruck Wheel type – Drive wheel: Pneumatic - Dual mounting Dwedpfx Asy E Tx Roggeb Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 18.00-33 Wheel size – Steering wheel: 18.00-33

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Rod loader, Topload 4-25 Year of manufacture: 2014 Previously mounted on an Emco E25. Djdpjzwb Uzsfx Aggowb

Year of construction: 2001, condition: used, Five CNC PCB drilling and routing machines are available. 1) Pluritec Multistation V3 CNC PCB drilling and routing machine, year of manufacture: 1998. 2) Schmoll A-System 1 Twin CNC PCB drilling machine, year of manufacture: 1997. 3) Lenz G650-4 CNC PCB drilling and routing machine, year of manufacture: 2001. 4) Lenz GX-460/2 CNC PCB drilling and routing machine, year of manufacture: 1991. 5) Lenz DLG 550-2 AL CNC PCB drilling and routing machine, year of manufacture: 2002. The machines come from the drilling department of a PCB manufacturing facility. An on-site inspection is possible. Dodpfx Agezzqc Nsgewb

Condition: like new (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 1,800 mm, total length: 1,500 mm, total width: 1,700 mm, overall weight: 1,550 kg, The machine comes from a training workshop and has hardly ever been used. Dwsdpfezq Hzysx Aggeb Condition: Like new.

Condition: good (used), machine/vehicle number: 2812, Year of construction: 2011, load capacity: 45,000 kg, lifting height: 16,300 mm, mast type: telescopic, total length: 13,000 mm, total width: 4,220 mm, operation weight: 78,760 kg, additional equipment features: Centralized greasing system, Hydraulic sliding cabin, Dual tread, Weight system, Equipment: lighting, Kalmar DRF450-65S6X from Uniktruck Wheel type – Drive wheel: Pneumatic Dsdpfx Aeyuhuwoggswb Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 18.00-33 Wheel size – Steering wheel: 18.00-33

Condition: used, Spot Welding Machine DALEX Type SL 16 - 2 Machine No. ZZH/N-10183 Year of manufacture: approx. 2002 Rated power at 50% duty cycle: 16 KVA Maximum welding power: 50 KVA Max. throat depth: 500 mm Max. electrode force: 17 - 278 daN Electrode arm Ø 45 mm Electrode holder Ø 25 mm Arm spacing: 150 mm / 300 mm Operating pressure: 1–6 bar Open circuit voltage: up to 3.6 Volt Connected load: 37 kVA Mains connection: 400 Volt, 50 Hz - Weld control MPS 200-003 - Welding cycle triggered via electric foot switch Dwodpfxey N Duko Aggsb - Water-cooled Required space (L x W x H): 1100 x 720 x 1450 mm Weight: 230 kg Very good condition

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) Dedpfovpalasx Aggswb ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Short-term availability – THE OPPORTUNITY! We are offering our well-maintained and fully operational chalet machine from the renowned Swiss manufacturer KRÜSI for sale. As we are switching to another model, you now have the chance to acquire this flawless machine. It is still in use, so functional testing and trial runs are welcome at any time. Dismantling and collection by buyer Assembly in consultation with Krüsi recommended Machine year: 2018, in operation since 2019 Total length with tables approx. 35.5 m Available from 08/2026 Machine details: - 4 milling units, each 4 kW, spindle drive via toothed belt - Maximum working range: 250 mm construction height and 245 mm wall thickness - 6 frequency converters for soft start and motor braking - Automatic work cycle and pneumatic workpiece clamping - Siko position indicators on adjustment spindles for horizontal operation - Pneumatic under-table crosscut saw, left, 5.5 kW with frequency converter - Hand-operated drilling unit 1.8 kW, mounted on the right column - Hydropneumatic feed for drilling unit - Additional pneumatic vertical clamping cylinder with bracket - Additional pneumatic horizontal clamping cylinder with bracket - Auxiliary table for milling unit with additional vertical clamping cylinder - Stop rail 0.5 m, mounted at the front left of the machine frame - Stop rail 0.5 m, mounted at the front right of the machine frame - Auxiliary table for short workpieces - Steel chip funnel for pit extraction - Dovetail and end-groove milling machine (with pneumatic rotary axis) Milling and drilling tools: For horizontal milling units: - WPL rabbet cutter Ø 180 mm, adjustable range 61-240 mm x 40 mm, Z=2 For vertical milling units: - WPL rabbet cutter Ø 230 mm, adjustable range 61-240 mm x 40 mm, Z=2 - WPL rabbet cutter Ø 270 mm, adjustable range 61-240 mm x 40 mm, Z=2 For drilling unit: Dwsdpfxjy Ri Hue Aggob - Drill Ø 20 mm, with long centering tip - Drill Ø 30 mm, with long centering tip For 90° swiveling dovetail and end-groove milling machine: - WS rabbet cutter Ø 230 mm, bottom Ø 40 mm, width 40 mm - WS dovetail cutter 20°, 92 x 36.5 x IG M 24 left, Z3, V3, F3 with chip-breaker grooves, MK 863-1 - WS dovetail cutter 20°, 92 x 36.5 x Ø 30 mm, Z3, V3, F3 with chip-breaker grooves, MK 863-2 - Clamping wrench for above dovetail cutters Accessories: Horizontal above: - WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm - Center part alu Ø 270 mm, width 30 mm, bore Ø 40, Z2 - Center part alu Ø 270 mm, width 50 mm, bore Ø 40, Z2 Horizontal below: - WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3 - Center part alu Ø 180 mm, width 40 mm, bore Ø 40, Z2 Vertical front: - WS slot and tenon cutter alu Ø 270 mm, bore Ø 40, adjustable range 21-40 mm - Center part alu Ø 270 mm, width 40 mm, bore Ø 40, Z2 Vertical rear: - WS adjustable rabbet cutter alu Ø 180 mm, bore Ø 40, adjustable range 26-50 mm, 2 x Z3 F3 - Center part alu Ø 180 mm, width 30 mm, bore Ø 40, Z2 - Safety guard for horizontal above with holder (for cutter Ø 270 mm) - Safety guard for vertical rear with holder (for cutter Ø 180 mm)

Condition: good (used), Year of construction: 2015, functionality: fully functional, 4 x Pockets 2 x Knives Pallet feeder Noise reduction hoods KTZ-SBAP delivery Dodpszltlhofx Aggswb

Condition: used, Year of construction: 2021, power: 4.9 kW (6.66 HP), cutting height (max.): 2,200 mm, cutting width (max.): 5,300 mm, saw blade diameter: 250 mm, actuation type: manual, rotational speed (max.): 5,300 rpm, Equipment: CE marking, saw blade guard, Format4 Kappa V60 vertical panel saw by Felder, purchased on May 26, 2021, for precise cutting of panel materials in the woodworking shop. Suitable for large-format wood, wood-based materials, and coated panels with minimal space requirements. Key technical data: - Cutting depth: Maximum 60 mm - Cutting height: 2200 mm vertically - Cutting length: 5300 mm - Motor power: approx. 4.9 kW - Saw blade: Ø 250 mm at 5300 rpm - Dust extraction: 2x 100 mm connections - Weight: approx. 910 kg, depending on the model - Vertical design for space-saving cutting of large panels - Precise horizontal and vertical cuts for panel materials - Particularly interesting for carpentry shops, makerspaces, training workshops, and companies with regular panel cutting needs No warranty Dwsdpfjzulpqox Aggsb

Year of construction: 2016, condition: excellent (used), functionality: unexamined, Edge Polisher Comandulli Musa 7+4 DX Working direction: from right to left - Feed speed (conveyor belt) 0 to 3 m/min - Belt width 600 mm - Working thickness 10 to 80 mm - Min. working width 80 mm - Max. working width (without bar) 1200 mm - Max. working width (with bar) 3000 mm - Loading plane height 750 mm Djdpozipzgefx Aggewb Aggregates: - Calibrating spindle with vertical and horizontal positioning for a 260 mm diameter flat diamond wheel - Edge polishing spindles, no. 7, with floating mechanism – oscillation - Chamfering spindles, no. 4; the first two chamfering spindles (no. 1 upper and no. 1 lower) are inclined at 45° and equipped with the mechanical locking system TMM3. Two spindles at 45° (no. 1 upper and no. 1 lower) for polishing the previously created chamfers. Automatic valves for the water 2 roller tables, each 1.5 m long Color touch screen Rated power 22 kW Dimensions (excluding rollers) 5.15 x 1.8 x 1.74 m Weight 4000 kg

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, used confectionery oven Wachtel Piccolo I-4, overhauled, 4 decks for sheets 60 x 80 cm, on stone, DMS 3 MASTER EM 100 GLAS control, with hood, swath condenser and underframe, fabrication no. 28559, year of manufacture 2014, only rarely used, 400 V, 50 Hz Dsdpfxezhilvo Aggewb

Condition: excellent (used), Year of construction: 2000, Ref:11105 . 2000 Polar RA-4 Paper Jogger Comprising; Air table and left & right side flaps for smooth pile flow Tilting table with adjustable angle for light or heavy stock Tilt action to the left or right Including air table blower unit. N.B. In-house, 6 bar compressed air line required. Dwedpfx Agey Uya Tegob Specification: Useable surface, Max: 90 x 115 cm Pile height, Max: 16.5 cm Power requirements : 3pH, 380-415V, 1.5kW. Space required (tilted): 124 x 155 cm.

Condition: used, Used Alfa Laval model PX60VGD-140G stainless steel separator centrifuge. Bowl speed max. 6240 rpm. Equipped with 18.5 kW/50 Hz/1500 rpm motor. Some tools available. New in 2003. Dedpfx Aezvyi Ioggjwb

Condition: used, Year of construction: 2019, machine/vehicle number: 0191, For sale: Fenstek Emerald F260, a 4-axis CNC profile machining center from 2019, designed for the precise machining of long aluminum and plastic profiles. Thanks to its working range of up to 7,000 mm and the powerful 9 kW HSD spindle, this machine is particularly suitable for window, door, and facade production. The machine comes from a professional production environment, has been well maintained, is damage-free, and is fully operational. Inspection and a demonstration under power are possible. Key specifications: - Axes: X / Y / Z / A, 4-axis interpolation - Control: PA8000 - Spindle: HSD, 9 kW - Maximum speed: 24,000 rpm - A-axis rotation: +90° to -90° Dwsdex R U Eiopfx Aggsb - Working range: up to 7,000 mm, depending on the clamping configuration - Tool magazine: ISO30, 9 positions - Operations: milling, drilling, tapping, grooving, and chamfering - Suitable materials: aluminum profiles, light alloys, and uPVC An interesting machine for companies that want to machine long profiles flexibly and in a single setup.