Used Delta Storti Cha2500 for sale (651)

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Circular saw unit, 0° - 46° swivel, maintenance-free, Saw blade diameter: 250-550mm Maximum cutting height: 200mm Saw blade arbor: 30mm Undertable extraction port: 120mm Parallel fence with fine adjustment Fence ruler length: 1200mm, swiveling Extension table: 1250x650mm Cutting length: 2800/3200mm Crosscut fence: 3200mm, swiveling 90-45°, 2 fence jaws Kappa 550 control with programmable angle and height positioning, automatic cutting height correction when swiveling. 3-line LED display for height, angle and speed Circular saw table extension up to 1620mm behind the saw arbor, anodized aluminum On/off switch on the sliding table Sliding table: 3200mm, anodized 10 years Felder warranty on "X-Roll" Swivel mechanism for extension table Cutting width: 1250mm Upper guard cutting width: 1250mm Extraction port: 100mm Electrical system Kappa 550, 3x400V 50Hz CE, 10 KW S6 with star-delta starter 3 speeds: 3000/4000/5000 rpm Quick View Location: Flörsheim Ndodpfsz Dyfcox Aazob Availability: short notice

Condition: new, table diameter 900 mm table load 1 t swivelling range 0-135 Grad excentricity 200 mm table turning speeds 0,12 - 1,2 U/min Torque 2000 N/m total power requirement 0,75 kW Njdpegvkikjfx Aazedb dimensions of the machine ca. 1,5 x 1,020 x 0,9 m The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading and trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table diameter 560 mm table load 0,3 t swivelling range 0-90 Grad table turning speeds 0,25 - 4 U/min Torque max. 360 N/m Nedpfxogvkgte Aazedb centre of gravity max. 150 mm total power requirement 0,4 kW The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, saw blade diameter 520 x Ø 50 mm cutting diameter 200 mm cutting length 420 mm Cutting height at 45° 140 mm dimensions of saw-blade 520x3,6/3,0x50 mm turning speeds 2800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 310 kg. range L-W-H 1400 x 900 x 1650 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60°/45°), with fixed stops - Shift cut on both sides (60°/45°), with fixed stops - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Furnishing : - 3.0 kW motor for ALU cuttings - Saw blade can be tilted via handwheel and worm gear (shift cut) - Saw blade diameter 520 mm - Saw blade mounting hole 50 mm - Saw blade speed 2,800 rpm - 400 Volt / 3 kW (S6/40%) motor with brake and automatic. Star-delta motor circuit - Machine weight approx. 250 kg Cutting data : - Cutting length at 90° = 420 mm - Cutting height at 90° = 200 mm - Cutting length at 45° = 295 mm - Cutting height at 45° = 140 mm Special accessories included: - HM saw blade 520x3.6/3.0x50 mm - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above best. from : 2 vertical clamping cylinders adjustable with lever valve Ndodpfjxaaxdsx Aazsb - pneumaschine saw blade spray device - Machine can be tilted from the front on both sides using a hand crank - Machine stand

Condition: excellent (used), mileage: 344,529 km, power: 265 kW (360.30 HP), first registration: 09/2011, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,500 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, total length: 8,300 mm, total width: 2,550 mm, Year of construction: 2011, = Additional options and accessories = - PTO = Remarks = Wiedemann Reichhardt combi kolkenzuiger (type: 12.0/2.5 - 320) - Inhoud watertank: 2.500 Liter - Inhoud slibwatertank: 8.000 Liter - Achterwaarts kippende opbouw - Kolkenzuigerarm bovenzijde, links- en rechts verschuifbaar - Welvaartsweegsysteem (type: Delta 30) - Radiografische afstandsbediening Ndsdpsymqbqsfx Aazjb - Vacuumpomp Wiedemann (type: KW 3000), 3.000 m³ per uur - Hogedrukwaterpomp Speck bij 400 bar - Uitschuifbare achterbumper - Opbergkist - Aluminium brandstoftank 330 Liter - Adblue tank 60 Liter = More information = Technical information Number of cylinders: 6 Engine capacity: 12.740 cc Rear axle 1: Lift axle Weights Empty weight: 15.730 kg Carrying capacity: 10.770 kg GVW: 26.500 kg Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Identification Registration number: BZ-LR-51 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), mileage: 444,759 km, power: 250 kW (339.91 HP), first registration: 05/2009, fuel type: diesel, tire size: 385/55 R22.5, axle configuration: 6x2, wheelbase: 4,700 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, number of gears: 12, suspension: steel-air, number of seats: 2, total length: 9,400 mm, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2009, Equipment: differential lock, Superstructure Construction year: 2009 Volume: 15 m3 Tank capacity: 1500 liters Vacuum pump: Delta, 3000 m³/hour The wastewater tank: 15,000 liters The cyclone tank: 1,500 liters The cooling water tank: 1,500 liters. = More information = General information Cab: single Registration number: BV-ZH-79 Technical information Number of cylinders: 6 Engine capacity: 11.705 cc Drivetrain Make of engine: Scania Axle configuration Brakes: disc brakes Front axle: Tyre size: 385/55 R22.5; Steering; Suspension: leaf suspension Rear axle 1: Tyre size: 315/70 R22.5; Double wheels; Differential lock; Suspension: air suspension Rear axle 2: Tyre size: 385/55 R22.5; Lift axle; Steering; Suspension: air suspension Weights Empty weight: 15.265 kg Ndodpfxezg Hdts Aazeb Carrying capacity: 12.735 kg GVW: 28.000 kg Functional Water tank: 2.300 l Tipper: Back Maintenance, history and condition APK (MOT): tested until 12/2026 Technical condition: very good Visual appearance: very good = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: new, 0 600 x 800 mm Motor output 15 kW 0 0,6 m³ Diameter of the motor 260 mm Dimensions (L/W/H) 1.805 x 1.118 x 1.646 mm Weight ca. 1.100 kg Hoku single-shaft shredder H 600 Compact, robust, high throughput ----- Technical manufacturer description: Ndedpfxjx Iwfmo Aazob The H600 high-performance shredder with its flexible application options can shred all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) and achieves a high and, in the case of bulky materials, achieves an enormous reduction in the volume reduction of the material. The hydraulically controlled pusher feeds the wood waste to be shredded to the cutting area of the rotor and is controlled automatically and automatically and load-dependent. The high-performance electric rotor made of has a diameter of 252 mm and operates with a rotor speed of rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-fold rotating knives / reversible cutting crowns are located in milled knife pockets knife pockets on special knife carriers. This highly efficient system guarantees, through the reduction of the cutting gap between the counter knife and rotor, it guarantees high throughput, low energy consumption and optimum optimised discharge of the shredded material. Clamp size (10–60 mm) depending on sieve perforation. Technical data: Hopper opening 600 x 800 mm Hopper capacity 0.6 m³ Working width of the rotor 600 mm Rotor diameter 260 mm Drive power 15 kW Rotor speed 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of knives: concave/40 x 40 mm, reversible cutting crowns concave/ 30 x 30 mm, broaching knives Screen perforation: 10-60 mm connected load: 400 V +/- 5% / 50 Hz included: Switch cabinet (Rittal) with 5 m cable Electrical control (SPS Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Gear limit switch 1st row of knives Hold-down device on the pusher for long and large parts Large 40 x 40 mm blades for optimum material feed Very robust gearbox Special broaching blade to prevent lateral jamming ----- Price of the above mentioned machine on request! ----- Prices plus packaging and shipping, plus VAT. (technical data according to manufacturer - without guarantee !)

Condition: ready for operation (used), Working width 410 mm Length of the planing table 1450 mm Number of knives 4 St. Motor output 4 kW Dimensions (L/W/H) 2650x850x1100 mm weight of the machine ca. 750 kg SCM Surface planer F 410 N ----- Technical manufacturer's description: Planing width: 410 mm Total table length: 2600 mm Table height: 855 mm Feed table length: 1450 mm Aluminum planing fence swivels up to 45° Planing fence dimensions: 1100 x 170 mm 4-knife planing shaft diameter: 120 mm Ndsdpfx Aowzmu Djazeb Knife shaft speed: 5000 rpm Motor power: 4 kW TERSA monobloc one-way reversible cutterhead SCM dressing protection device integrated in machine stand 120 mm diameter extraction nozzle Manual star-delta switch Motor protection switch, undervoltage release Lockable main switch Automatic motor brake Pivoting auxiliary fence ----- Price of the above machine on request! ----- (technical data according to manufacturer - without guarantee!) All prices quoted are net and subject to VAT.

Condition: as good as new (ex-display), Working width 630 mm Working height 3-310 mm Motor output 7,5 kW Number of knives 4-TERSA St. Feed speed 6-20 m/min. Vertikal stroke elektrisch FIMAL thickness planer type SP 63 A Demonstration Maschine ----- NEW MACHINE "Partnership Edition" Njdsu Uu U Ujpfx Aazodb Technical data / basic equipment: ----- - 4-knife V-shaft, d = 120 mm, speed 4,800 rpm. - Table height adjustment via 4 trapezoidal spindles - chip removal up to 8 mm - Min. / Max. working height: 3/310 mm - Min. workpiece length: 250 mm - Suction nozzle 150 mm - Electrics and protections in accordance with CE standards - Planing width: 630 mm - Motor: 50 Hz., 5.5 kW / 7.5 HP with manual star-delta switch - Infinitely adjustable feed speed from 6 to 20 m/min. - Motorized table height adjustment with electronic positioning device (Input of planing height via keyboard with electronic display) - Sound level according to EN 27960: 86 – 90 dB(A) Stock machine additionally equipped with the following options: ----- ----- - Motor with 7.5 kW / 10 hp - Thicknessing table extension, 600 mm - 2x rubberized pull-out roller - TERSA system knife shaft, including reversible knives ----- Promotional price from stock: on request! ----- All prices ex warehouse plus VAT/plus. Freight and assembly at cost (Technical information according to the manufacturer - without guarantee!)

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, Electrolux professional dryers, 2 models, UNUSED. Nedpfx Aezg D Uioazjdb - 2x Electrolux TD6-16, dimensions = 720x1210x1700 mm, 400V, 60 Hz, 14.3 Kw, PRICE = €3750 The Electrolux TD6-17S is an industrial stack dryer with two drums and a total capacity of 2 x 17 kg. This double dryer is designed for maximum efficiency, fast drying times, and low energy consumption, making it ideal for professional laundries and self-service laundromats.

Condition: new, Year of construction: 2026, Machine with special rotor Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. Njdpfx Ajdv Eu Hsazodb The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Nsdpfez Ehvxex Aazedb

Condition: used, Year of construction: 2022, Exhibition machine Year of manufacture: 2022 Equipment and technical data: > Solid German engineering for jointing and rabbeting, including concave and convex profiling > Adjustable rabbet depth for PLANER WIDTH up to 510 mm and max. chip removal up to 8 mm > Ergonomic working position directly at the cutterblock > Panhans four-knife cutterblock with strip-type planing knives and adjustment tools > Finely planed cast iron table, total table length 2850 mm > Control panel at eye level with digital display of chip removal, current outfeed table position (neutral, concave and convex profiling), including template holder and practical tool storage > Electrically adjustable infeed table via push buttons > Concave and convex profiling adjustment on the outfeed table > Toothed table lips for noise reduction > Adjustable fence in depth and angle via a single lever, adjustable up to 45° and mounted in an extremely smooth steel guide > Anodized fence ruler > Swivel auxiliary fence type 1545 > Console for feed mechanism > Bridge guard TXF type 1570 with folding cover > Automatic star-delta starter, motor circuit breaker > Planed in our workshop Planer width: 510 mm Infeed table length: 1620 mm Outfeed table length: 1170 mm Total table length: 2850 mm Motor power: 5.5 kW / 7.5 HP Cutterblock speed: 5000 rpm Dust extraction port: 160 mm Voltage: 400 V / 50 Hz Footprint: 2850 x 1420 mm Color: Light gray RAL 7034 and violet-blue RAL 5000 Weight: approx. 1050 kg Includes: Full steel Tersa cutterblock > Automatic motor brake Location: Flörsheim Availability: Short notice Njdpfx Ajzz Tzneazjdb

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 23.30 E91D-A003, input voltage: 230 V, total length: 125,000 mm, total height: 2,500 mm, total width: 125,000 mm, • Automated sorting and palletizing system with robotics • Robot-assisted sorting, packaging, and palletizing system • Flexible sorting and packaging system with delta and palletizing robots • Automated packaging and palletizing system • Intelligent sorting and palletizing solution with robotic systems • Fully automatic sorting, packaging, and palletizing system Nedoz Df Aaepfx Aazsdb • Robot-assisted packaging and palletizing system • Automated packaging line with delta robots and palletizing robot • Modular sorting and packaging system for packaging • Highly automated sorting, packaging, and palletizing system Automated sorting and palletizing system with robotics For sale is an automated sorting and palletizing system for processing and packaging various products. The system is equipped with two delta robots for product handling and sorting, an industrial palletizing robot, and a case sealer for automatically closing the packages. After sorting, the products are automatically grouped into packages, case sealed, and then palletized. The system is suitable for high throughput rates and can be adapted to different products and packaging concepts. The modular design allows individual stations to be expanded or integrated into existing production lines. Equipment: • 2 × Delta robots for pick-and-place and sorting • 1 × Industrial palletizing robot • Automatic case sealer • Conveyor technology and system control • Suitable for semi-automatic and fully automatic operation The system is in good condition and can be inspected by arrangement. Further technical information, documentation, and images are available upon request.

Condition: excellent (used), mileage: 207,559 km, power: 315 kW (428.28 HP), first registration: 12/2011, fuel type: diesel, axle configuration: 6x4, wheelbase: 5,720 mm, fuel: diesel, fuel tank capacity: 15,000 l, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, total length: 9,000 mm, total width: 2,500 mm, Year of construction: 2011, = Additional options and accessories = - PTO = Remarks = Wiedemann Reichhardt 15m³ kolkenzuiger (type: 12.0/2.5 - 320) - bovenzijde, links- en rechtsverschuifbaar (zuigslang Ø200 mm) - Hogedrukslanghaspel achterzijde (120 meter hogedrukslang Ø19 mm) - Capaciteit: 3.000 m³ per uur - Speck Hogedrukwaterpomp (type: P45-75 180) - Achterwaarts kippende opbouw met hydraulische bediening - Extra inspectieluiken op slibtank voor reiniging en onderhoud - Welvaartsweegsysteem (type: Delta 30) - Radiografische afstandsbediening = More information = Technical information Number of cylinders: 6 Engine capacity: 12.780 cc Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels; Steering Weights Empty weight: 16.700 kg Carrying capacity: 15.300 kg GVW: 32.000 kg Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Identification Registration number: BZ-RB-28 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. Ndodpfeymrfksx Aazjb No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: reconditioned (used), Year of construction: 1986, cutting width (max.): 800 mm, cutting length (max.): 2,800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Nodpfjwrb U Tjx Aazjdb

Condition: used, Year of construction: 2008, Overview This electronic empty bottle inspector (EBI) for returnable glass bottles was manufactured in 2008 by Germany HEUFT. The machine is designed for inspection of returnable glass bottles in beverage production lines. It is currently still installed and can be visited on request. Technical data - Capacity: up to 60,000 bottles/hour (machine) / up to 54,000 bottles/hour (filler) - Formats: 20 cl returnable glass bottles (Coca-Cola, multiproduct, Sprite formats) - Application: Empty bottle inspection (returnable glass bottles) - Configuration: Single-lane installation between bottle washer and filler - Inspection technology: HEUFT reflexx inspection system - Inspection systems: - Base inspection (foreign body detection) - Finish inspection (mouth / finish defects) - Double sidewall inspection with 90° rotation - Residual liquid detection (Dual High Frequency + Infrared) - Detection & rejection: Ndjdpfxsy Ucy No Aazob - Detection of fallen, tilted, higher or lower bottles - DELTA reject system - Vision system: - CCD matrix cameras - 32-bit image processors - Stroboscopic lighting with microprocessor control - Control system: HEUFT SPECTRUM multiprocessor control - Operator interface: HEUFT PILOT LCD terminal with membrane keyboard and LED counter display - Construction: Stainless steel and synthetic material housing - Additional features: - Encoder for conveyor speed monitoring - Automatic air-blow cleaning system - Pre-programmed bottle formats with additional programs

Condition: used, Year of construction: 2007, Overview This electronic empty bottle inspector (EBI) for returnable glass bottles was manufactured in 2007 by Germany HEUFT. The machine is designed for inspection of returnable glass bottles in beverage production lines. It is currently still installed and can be visited on request.  Technical data - Capacity: up to 60,000 bottles/hour (machine) / up to 54,000 bottles/hour (filler) - Formats: 20 cl returnable glass bottles - Application: Empty bottle inspection (returnable glass bottles) - Configuration: Single-lane installation between bottle washer and filler - Inspection technology: HEUFT reflexx inspection system - Inspection systems: - Base inspection (foreign body detection) - Finish inspection (mouth / finish defects) - Double sidewall inspection with 90° rotation - Residual liquid detection (Dual High Frequency + Infrared) - Detection & rejection: Nedpfoy Ucyvsx Aazsdb - Detection of fallen, tilted, higher or lower bottles - DELTA reject system - Vision system: - CCD matrix cameras - 32-bit image processors - Stroboscopic lighting with microprocessor control - Control system: HEUFT SPECTRUM multiprocessor control - Operator interface: HEUFT PILOT LCD terminal with membrane keyboard and LED counter display - Construction: Stainless steel and synthetic material housing - Additional features: - Encoder for conveyor speed monitoring - Automatic air-blow cleaning system - Pre-programmed bottle formats with additional programs

Condition: used, Year of construction: 2026, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Nsdjz A H Saepfx Aazsdb Storage location: Supplier

Condition: new, functionality: fully functional, planing width: 530 mm, number of planer blades: 4, Equipment: motor brake, Houfek R 530 surface planer - 400V/50Hz, 5.5 kW (7.5 HP), width 530 mm 1.1 Motor 5.5 kW (7.5 HP), Tersa cutterhead 1.2 Total work table length 3100 mm 1.3 Dimension of the guide ruler 1300x150 mm with tiltable auxiliary ruler 1.4 Planed table 1.5 Upper control panel with ELGO Z60 digital display Electronic adjustment of the take-off 0 - 7 mm Tilt angle of the tiltable ruler 0°- 45° - Digital display Adjustment of the input table inclination (pointed/hollow joint) 1.6 Cover for the SUVAMATIC planing roller 1.7 4-knife planing roller D=120 mm 1.8 Automatic star/delta start of the motor 1.9 Electromagnetic brake 1.10 Suction nozzle with outlet D=150 mm 1.11 Blade setting gauge 1.12 Voltage 400V/50Hz Nsdpfx Aaeu Rnqqjzjdb 1.13 Packed in PE film as standard 1.14 Machine built according to CE power and safety standards

Condition: new, Year of construction: 2026, functionality: fully functional, planing width: 530 mm, Houfek Planer-thicknesser SC 530 Standard configuration: Motor 5.5 kW (7.5 HP) Total length of planer tables SC 530 – 2,350 mm Simultaneously tilting planer tables Guide fence dimensions 1,300 × 150 mm Fence tilting angle 0°–45° Thicknesser table length – 1,000 mm Manual height adjustment of thicknesser table Mechanical numeric measurement of table position 4-point mounting of thicknesser table Split inlet pressure segments Grooved infeed roller Njdpfxowvaqzs Aazodb Outfeed roller Min./max. workpiece thickness 3 – 250 mm 4-knife cutterblock D=120 mm Automatic star/delta motor start Feed speeds 6/12 m/min Electromagnetic brake Voltage 400V/50Hz Standard packaging in PE film Machine built according to CE electrical and safety standards Additional equipment (installed on this machine): Motor 7.5 kW (10 HP) for SC 530 Split grooved feed roller Tilting cover for cutterblock Tiltable auxiliary fence Motorised thicknesser table lift with two-speed motor Electronic position measurement of thicknesser table with digital display Cutterblock type "Tersa" for SC 530 mm Planed planer table Planed thicknesser table

Condition: new, Year of construction: 2025, functionality: fully functional, planing width: 630 mm, height adjustment type: electric, number of planer blades: 4, planing height: 300 mm, table length: 1,200 mm, Equipment: motor brake, Houfek Thickness Planer A 630 Year of manufacture: 2025 Motor: 7.5 kW (11 HP) Electric table lift Automatic table positioning to specified height Feed table - length 1200 mm Automatic star-delta motor start Electromagnetic brake Infinitely variable feed speed adjustment, 4 - 19 m/min Segmented pressure bar at the infeed, pressure bar at the outfeed Ndsdjx Hy Nlopfx Aazjb Feed rollers: 1x grooved at the infeed + 2x steel rollers at the outfeed 4-point table mounting Min./max. workpiece thickness: 3 - 300 mm Options installed on this machine: Segmented grooved infeed roller Two rubber-coated outfeed feed rollers Cutterblock type "Tersa" Planed thicknessing table 1200 mm Outfeed table extension 1200 mm

Condition: new, Year of construction: 2025, machine/vehicle number: KK00050613, input frequency: 50 Hz, type of input current: three-phase, total length of planing tables: 2,250 mm, overall weight: 695 kg, chip removal: 5 mm, chip removal for surfacing (max.): 5 mm, number of planer blades: 4, planer shaft diameter: 120 mm, planing height: 240 mm, Equipment: motor brake, Holzkraft jointer and thickness planer minimax fs 52 TERSA, Planing width 520 mm, planing height 3 - 240 mm, Jointer table length 2,250 mm, 4-knife TERSA planing cutterhead, Motor 7 kW (9.5 hp); S6 5-meter connection cable 2.5 mm² with 16 Ah plug, Nodpfx Aexn Suaoazodb complete with: simultaneously folding tables, common dust extraction hood for jointer and thickness planer D = 120 mm, thickness table adjustment via handwheel with integrated display, star-delta switch, auxiliary fence, CE and BG certified for wood dust. Order No.: 5503501 immediately available from Seevetal, Ex works, without transport, subject to prior sale.

Condition: new, Year of construction: 2025, machine/vehicle number: 6939, functionality: fully functional, Fimal Swivel Spindle Milling Machine TX 160 Ndsdpfxjvlw Idj Aazeb "Partnership Edition" Milling stop including parallel adjustment with handwheel and digital display, handwheel adjustment with digital display for the front stop jaw, electric travel swivel device for the complete stop, quick-release lever for fixing, aluminum stop jaws and pressure device, arc milling stop, electromotive spindle height adjustment, including digital display and decimal impulse setting, Table insert adjustable to the milling tool diameter (instead of table insert rings), Indicator lights for set milling speed, Electrical system and safety devices according to CE standard, Table dimensions: 2,500 x 780 mm, Milling spindle d= 30 mm, H= 140 mm, Milling speeds: 3000/4500/6000/8000/10000 rpm, Max. tool size under the table: d= 320 mm, H= 50 mm, Motor 7.5 kW / 10 HP, 400 Volt, 50 Hz, including automatic star-delta switch, Sound pressure level according to EN 27960: 83.9 – 87.3 dB(A), Spindle inclination: -45° to +45°, Electromotive spindle swivel adjustment including electronic display and decimal impulse setting, Partnership Edition complete with: "L" version with double-sided table extension and extendable workpiece support with emergency stop button, Upper control panel including electronic display, Swiveling mounting plate for feed device, mounted on the vertical column of the upper control panel, Socket for feed device, Right-left operation according to CE standard, Preparation for the installation of AIGNER integral stop jaws Ex works, from Seevetal location, without pre-carriage, freight and instruction, as inspected, subject to prior sale

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 4,000 mm, total width: 1,050 mm, total height: 2,000 mm, overall weight: 164 kg, input voltage: 230 V, working width: 4,000 mm, Bralyx: 200x105x110 cm Nedpfxszxh Nue Aazodb Tire: 200x45x200 cm