Used Doll T2P-S3Fs21 Next for sale (898)

Condition: new, machine/vehicle number: 8fbda13da8c595f64678f0f82, empty load weight: 2,100 kg, maximum load weight: 11,300 kg, overall weight: 13,400 kg, axle configuration: 2 axles, total width: 2,550 mm, tire size: 275/70 r 22,5, Additional information Chassis: Central axle semi-trailer Fine-grain steel welded construction Fifth wheel coupling, manufacturer at our discretion, for 2 kingpins, with ball bearing swivel ring, locking angle max. 20° Support at the drawbar and at the front dolly Underrun protection, steel Half-shell fenders Coupling system for central axle semi-trailer CLG under-coupling drawbar with tested 50 mm towing eyes for the dolly and the tractor unit, including drawbar locking mechanism on the truck! Axles + Suspension BPW disc brake axles Air suspension For swap train design, standard fifth wheel height lowered to approx. 1100 mm, fifth wheel height raised to approx. 1280 mm, fifth wheel mounting height approx. 1140 mm. Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit 2 fail-safe coupling heads with coil-flex connecting lines to the semi-trailer EBS, electronic braking system with EBS plug at the front, with connecting cable EBS coil-flex connecting lines to the semi-trailer With raising and lowering function, ECAS, via truck control, ECAS CAN 2 bus required in the truck. Without ECAS CAN 2 bus in the truck, additional operating control required in the truck (not included in the scope of delivery): Electrical system with a pre-wired cable and a distribution box. Operation via 15-pin socket, pin 11 and 15, or 2 x 7-pin socket, pin 7 and 5. Note! This design must be technically checked in conjunction with the semi-trailer. If it is not technically possible to raise and lower the dolly and semi-trailer together, the operation is carried out via WABCO eTASC with a hold function in the lowered position + auto-reset function (no power required from the truck). Additional operation on the vehicle via WABCO eTASC + hold function in the lowered position + auto-reset function (no power required from the truck) Dwodpji Rizxofx Anzea Vehicle driving stability system ECAS only possible in conjunction with WABCO EBS. Axle load detection via EBS-CAN bus signal, for display on the instrument panel in the cab, the truck must be appropriately prepared, no truck installation. Brake release function from the truck to PIN 14 and additionally via a button on the vehicle next to the H & S valve, for releasing the brake in the coupled state, EBS power supply must be ensured! With CAN router Wheels and tires 275/70 R 22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, linked to the turn signal, flashing side marker lights 2 white position lights at the front, LED 2 white/red side marker lights at the rear 2 x 7-pin fail-safe plugs at the front, with connecting cable 2 x 7-pin fail-safe plugs with coil-flex connecting lines to the semi-trailer Cable + plug/or socket for reversing camera system, depending on the vehicle type Operating instructions Note! Observe the long truck regulations! Please note the currently permitted route network! The tractor unit must be brought to the Triptis plant for approximately 1 week for adjustment of the drawbar!

Condition: used, empty load weight: 18,240 kg, maximum load weight: 45,760 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 02/2012, loading space length: 12,120 mm, loading space width: 2,740 mm, loading space height: 550 mm, tire size: 285/70R19.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, SAF axles, forced steering, lifting + lowering, ABS (anti-lock braking system), lashing rings. Body: Low-bed trailer with 3 hydraulically steered axles and jeep dolly. Including a jeep dolly with a 10t SAF axle and 295/80R22.5 tires! Djdpsyf E E Usfx Anzewa At the rear: 3 x 12t SAF axles! Extendable to 3.2m width, 8m low bed platform! With radio and cable remote control, automatic self-alignment. A detailed technical description is available and can be sent by request! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 07/2018, total length: 5,060 mm, total width: 2,520 mm, wheelbase: 4,200 mm, Year of construction: 2018, Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Dwsdpsy Nyc Djfx Anzsa Empty weight: 2.640 kg Carrying capacity: 15.360 kg GVW: 18.000 kg Registration number: 37-WS-TR

Condition: new, axle configuration: 1 axle, Year of construction: 2026, Equipment: ABS, Dolly with one axle, model PRD-1 Technical data (subject to change by the manufacturer) Technical permissible total weight: 12,000 kg Unladen weight: 1,850 kg Axle load: 9,000 kg Drawbar load: 1,000 kg Dwodpfxezctkmo Anzsa Saddle height: 1,200 mm Tires: 425/65 R22.5, new tires Overall length: 4,950 mm Overall height: 1,735 mm Overall width: 2,550 mm Coupling height: 510 mm Standard equipment Two-line pneumatic braking system with automatic load-dependent brake force regulator (ALB) from Wabco, diaphragm cylinder Automatic parking brake Air suspension Lifting and lowering device Drum-braked SAF axles 420x180 Adjustable saddle plate JOST Mechanical support leg with gearbox Hydraulic system: 2-circuit hydraulic system, driven by PTO Cardan shaft 540 rpm, pump 100 liters/min, operating pressure 150-240 bar, adjustable, oil tank 170 liters, usable volume 140 liters. Includes hydraulic hose and PTO. Lighting system, input 12 volts / output 24 volts, without connecting cables Voltage converter 12V / 24V ABS converter EBS braking system for 40 km/h approval Rear lights with position lights, license plate lighting Air connection (ISO connections yellow/red) Ball coupling K 80 Underrun protection as a steel tube Rear lights with grid protection Fenders - 4 mud flaps with cover 2 wheel chocks with holder Paint RAL 7021 dark gray German documents for 40 km/h approval: technical data sheet, brake calculation, expert opinion Wielton guarantee 24 months, upon proof of annual technical inspection Additional Control for hydraulics from the cab, cable-connected Unladen weight / Permissible total weight / Payload depends on the respective equipment. All weight figures have a tolerance of +/- 3%. The manufacturer reserves the right to make technical changes to the vehicle.

Condition: used, machine/vehicle number: WFDFLT21301005260, empty load weight: 2,500 kg, maximum load weight: 10,900 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 11/2015, tire size: 285/70 R19,5", Additional information: Chassis: Fine-grain steel welded construction, telescopic support legs, chock blocks with holder, underrun protection made of steel, half-shell fenders. Towing system, tandem trailer: Drawbar with tested 50 mm towing eye, lower coupling, drawbar mechanically adjustable in length. Axles: BPW disc brake axles, air suspension with raise and lower valve, electronic dolly steering system. Braking system: 2-line pneumatic braking system, spring-loaded parking brake, Duomatik coupling head at the front, with connecting lines to the tractor unit, non-interchangeable coupling heads for the semi-trailer, EBS, electronic braking system with EBS plug at the front, with connecting cable. Electrical system: 24 volts, yellow side lighting, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin plug at the front, with connecting cable to the truck, 1 x 15-pin plug with connecting cable to the semi-trailer. Approval: Outline marking with reflective strips according to ECE R 048, warning sign according to ECE - 70, truck. Saddle height approx.: 950 mm. Dsdpfxoi Ri Rrj Anzswa

Condition: new, axle configuration: 2 axles, suspension: steel, color: other, Suspension: leaf spring suspension Rear axle 1: Tyre tread left: 100%; Tyre tread right: 100% Dwodpfjyzgmmex Anzea Rear axle 2: Tyre tread left: 100%; Tyre tread right: 100% Damages: none

Condition: used, machine/vehicle number: WFDFLT21301003569, empty load weight: 2,400 kg, maximum load weight: 11,000 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 03/2014, tire size: 285/70 r19,5, Further information: Fine-grained steel welded construction, fifth wheel coupling, manufacturer to our choice for 2 kingpins with ball bearing swivel, stop max. 20°, telescopic support leg, 2 chock blocks with holder, steel underrun protection, half-shell mudguards. CLG drawbar with tested 50 mm towing eyes for the dolly and the tractor unit. BPW disc brake axles, air suspension with lift and lower valve. 2-line pneumatic brake system, spring-loaded parking brake, Duomatic coupling head at the front, with connection lines to the tractor unit, 2 fail-safe coupling heads for the semi-trailer. EBS, electronic brake system with EBS plug at the front, with connection cable, CAN router, EBS connection cable to the semi-trailer. Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! Axle load recognition for trucks via EBS, not installed. 24 Volt, multi-chamber lights in LED, yellow LED lighting on the sides, 2 white position lights at the front in LED. Dsdpfsi Rizmsx Anzowa 2 white/red marker lights at the rear in LED, 1 x 15-pole plug at the front, with connection cable to the truck, 1 x 15-pole plug with connection cable to the semi-trailer, cable routing for camera system. Country of registration: Germany, with Dekra approval, prepared for single-row license plate holder, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear. Fifth wheel height approx.: 1150 mm.

Condition: used, machine/vehicle number: WFDFLT21601003376, empty load weight: 2,600 kg, maximum load weight: 10,800 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 01/2014, tire size: 285/70 r19,5, Further information: Dwodpfx Ansi Riydozea Fine-grained steel welded construction, fifth wheel coupling, manufacturer at our discretion for 2 kingpins, telescopic support leg, chock blocks with holder, steel underride guard, half-shell fenders. Drawbar with tested 50 mm drawbar eye, lower coupling drawbar mechanically adjustable in length. BPW disc brake axles, air suspension with raise and lower valve, electronic dolly steering system, sensor via contact in the drawbar eye (required in Germany to comply with the BO-Kreis regulation, or the semi-trailer must be steerable). 2-line pneumatic brake system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, with connecting lines to the tractor unit, 2 non-interchangeable coupling heads to the semi-trailer. EBS, electronic braking system with EBS plug at the front, with connecting cable, EBS connecting cable to the semi-trailer, axle load recognition for the truck via EBS, without truck installation. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pole plug at the front. Registration country: Germany, with Dekra approval, prepared for single-row license plate holder, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear, warning sign according to ECE - 70. Fifth wheel height approx.: 960 mm.

Condition: used, machine/vehicle number: WFDFLT21301008306, empty load weight: 2,000 kg, maximum load weight: 11,400 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 11/2018, tire size: 285/70 r19,5, Further information: Dwsdpji Riyasfx Anzea Fine-grained steel welded construction, fifth wheel coupling, manufacturer's choice for 2 kingpins, with ball bearing swivel, stop max. 20°, lockable, support on the drawbar, shims with holder, steel underride guard, quarter-panel fenders in front of and behind the axle assembly, with tarpaulin cover for empty journeys. CLG lower coupling drawbar with tested 50 mm towing eyes for the dolly and the tractor unit. BPW disc brake axles with 370 mm disc diameter, air suspension with raise and lower valve. 2-line compressed air braking system, spring brake parking brake, Duomatik coupling head at the front, with connecting lines to the tractor unit, 2 keyed coupling heads for the semi-trailer, incl. connecting spiral cable. EBS manufacturer Wabco, electronic braking system, with CAN router, with EBS plug at the front, with connection cable. EBS connection cable to the semi-trailer. Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! Axle load recognition for trucks via EBS, not installed for trucks. 24 Volt, 4 x 3-chamber lights + 1 round rear fog light, yellow LED side lighting, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pin plug at the front, with connection cable to the tractor unit, 1 x 15-pin socket, with connecting spiral cable to the semi-trailer, cable for reversing camera system with socket, additional LED work lights at the rear, switched via reversing light. Country of registration: Germany, with Dekra inspection, prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. Fifth wheel height approx.: 950 mm.

Condition: used, machine/vehicle number: WFDFLT21301006798, empty load weight: 2,600 kg, maximum load weight: 10,800 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 05/2017, tire size: 285/70 r19,5, Further information: Fine-grained steel welded construction, fifth-wheel coupling, manufacturer at our discretion for 2 kingpins, telescopic support leg, chocks with holder, steel underrun protection, half-shell fenders, removable upper parts Drawbar with tested 50 mm drawbar eye, lower coupling for drawbar BPW disc brake axles, air suspension with raise and lower valve, mechanical dolly steering system (required in Germany to comply with the BO-Kreis regulations) 2-line compressed air brake system, spring-loaded parking brake, Duomatik coupling head at the front, with connecting lines to the tractor unit, Duomatik coupling head for the semi-trailer, including connecting coil, EBS, electronic brake system with EBS plug at the front, with connecting cable EBS connecting cable to the semi-trailer, with CAN router, axle load detection for the truck via EBS, without truck installation. Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! 24 volts, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pole plug at the front, with connecting cable to the truck, 1 x 15-pole socket, with connecting coil to the semi-trailer, cable for reversing camera system with socket Dwodpfei Rivtjx Anzea with DEKRA approval, prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear, warning sign according to ECE - 70 Saddle height approx.: 960 mm

Condition: used, mileage: 483,000 km, power: 353 kW (479.95 HP), first registration: 09/2008, fuel type: diesel, overall weight: 26,000 kg, brakes: retarder, gearing type: mechanical, emission class: euro5, Equipment: soot filter, - Retarder- Lift &amp, steering axle- Air conditioning- Manual transmission- Trailer with cable winch- Loglift F265Z 2008Suspension: Dwjdpfov Iixgox Anzoa Leaf-air

Condition: used, machine/vehicle number: WFDFLT21301008851, axle configuration: 2 axles, first registration: 06/2019, color: other, Year of construction: 2019, Please contact us for more information. Dwsdpjxbf Dusfx Anzja

Condition: ready for operation (used), Year of construction: 2013, A monoblock high-performance dual-fuel burner Elco is available. Nominal output range (gas): 820kW-7340kW, nominal output range (oil): 1470kW-7340kW, gas connection pressure range: 70mbar-500mbar, fan power: 15kW, burner tube outer diameter: 415mm, machine dimensions X/Y/Z: approx. 2700mm/1450mm/1250mm. Documentation available. An on-site inspection is possible. Dodpfsy Ey Urox Anzjwa

Condition: like new (used), functionality: fully functional, Year of construction: 2019, Scrap conveyor was installed on a Laser Next 1530 built in 2019, but was only used sporadically and was eventually dismantled. All parts on the belts are the complete attachments to the machine. Dwjdpfxovcpi Is Anzoa Prima Power Art. No. D5.57H Steel conveyor belt for automatic turntable. Conveyor length to start of high conveyor: approx. 292 cm, high conveyor length approx. 160 cm. Total length approx. 452 cm. Conveyor height approx. 140 cm. Extension approx. 366 cm. Conveyor belt width approx. 67 cm. Conveyor width approx. 94 cm. Sale ex works without guarantee and return.

Year of construction: 2012, condition: excellent (used), Double-head saw with 3 controlled axes for aluminium, PVC, and light alloys, featuring automatic movement of the mobile head and electronic management of all angles from 45° (internal) to 15° (external), with precision up to 280 positions per degree. Dwsdpfx Aexqdu Dsnzea

Condition: new, Year of construction: 2026, Powered Load Moving Skates, compact built with low heights and capacities of 10, 24 and 40 tonnes. Intelligent Single-Joystick Control for all movements. Version with integrated lifting cylinder available as well as DUO controll for two powered skates. Please send us your request for a detailed offer. Dedpfxogi Dm Hj Anzowa

Condition: new, axle configuration: 2 axles, color: black, Tandem axle dolly 20 tons Bald suspension Hydraulic brakes on all wheels 18x22.5 tires Dish height 1240 mm Dwodpozblraefx Anzsa Condition: New

Condition: good (used), Dollies Dwjdpfsd Aaviox Anzja

Year of construction: 2026, condition: new, Picture 1: Offered Set of two load moving skates with 6tonnes capacity each. You can move 12tonnes in total. The skate system is equipped with high quaity polyurethane wheels. Dwedpfx Aegi Dl Nenzja other pictures: Load moving skates in different sizes from 60-220mm height and capacities between 5 and 220 tonnes. Available as 3-Point, 4-Point, Containerskates, 360° Rotational skates with Polyurethane wheels (for all floors) or Nylon wheels (for flat and smooth floors). Please send us an inquiry with information about the weight and project you have to move. We will then send you a detailed offer. Short delievery times, typicalles in stock. Pictures show a selection.

Condition: used, 1 Pair of Transport Dollies, Platform Trolleys, Transport Carts GORR 1 pair = 2 transport dollies, each equipped with 4 swivel castors Load capacity per dolly: 1000 kg Platform size per dolly: 1050 x 255 mm Material thickness of support plate/platform: 4 mm Overall height: 145 mm Djdpfx Aoxcixlsnzjwa Wheel diameter: 100 mm Wheel width: 37 mm Load capacity per fixed castor: 300 kg - Each dolly has 4 swiveling fixed castors with white polyamide wheels, bolted to the support plate - Each dolly is equipped with two fixed castors with brakes - Steel support plate as the platform surface with reinforced side edge Dimensions L x W x H: 1050 x 265 x 145 mm Net weight per dolly: 17 kg Net weight (pair): 34 kg Used, in good condition Pricing per pair = 2-piece heavy-duty dollies Included in delivery are 2 of these universally and flexibly applicable heavy-duty transport dollies. Currently 50 pairs in stock. Both dollies together offer 8 swivel castors and a combined load capacity of up to 2 tonnes. Our customers use them to transport squared timber, boards, planks, and sawn lumber. Others use them for moving angle steel, beams, and heavy pipes in the workshop. Also suitable for transporting electrical cabinets, control cabinets, heavy tables, and furniture. Ideal as machinery skates, material dollies, or machine moving gear.

Condition: new, Year of construction: 2024, functionality: fully functional, Turbo molecular pump nEXT85iD CF63 Edwards Dwjdpsw I Snhefx Anzsa

Condition: like new (used), Year of construction: 2022, OPPORTUNITY!!! I am offering furniture dollies/warehouse trolleys with the following dimensions: Width x Depth x Height: 2500x1150x2300 Mc-250.713 We have other trolley sizes available in upcoming offers. Triple stacking Polyamide wheels, 100 mm diameter, 4 swivel castors, 1 wheel with directional lock. Empty trolleys can be folded and nested inside each other. The Corletta can be used for in-house transportation and the storage of almost all types of goods. Thanks to the triple stacking capability, you can make full use of your warehouse height. We provide full trolley servicing. Dwedpfx Anexylg Hozja This allows us to offer a 1-year warranty on used trolleys! Delivery available throughout Europe! Your specialist in sales and servicing Corlett: KAM-KUB Logistic&Trolleys Europe

Condition: new, Steel Frame Automatic Nailing Bridge A fully automatic nailing station for nailing or stapling sheet materials in accordance with the design specifications including the following functions: ​ 1. Nailing or stapling of sheeting 2. Routing of openings or overhangs 3. Application of breather membrane 4. Nailing or stapling of battens ​ Specification Full PC control with 17” touch screen Interactive display of operation being performed Automatic download from drawing software. Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1300mm minimum panel height Maximum panel height up to 3.5m (optionally extendable) Maximum panel length 6m – optionally up to 13m 400mm wide heavy duty work tables 825mm working height 300mm maximum panel thickness (optionally 5000mm) Motorised table opening with automatic brake locking Bridge mounted with one nailing / stapling tool mounting as standard. (Options for 2 or 3 nailing tool mounts) Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail & Mitek. Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Dwsdpsdzc Rxofx Anzsa Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional electrically driven sheet feeding system, including automatic sheet feeding and height indexing of the support table. Optional router unit with 4kw motor - servo drive controlled Optional Equipment ​ Table with rails mounted for bridge Additional price per meter for table with rails mounted Independent rails to travel 8m over one 6m capacity table (16m of rail in total) Additional price per meter of rail Working table for holding panel 6m (no rails mounted) Additional price per meter for table Motorised chains rather than manual rollers - initial cost Price per meter for motorisation Baton positioning guiding arrangement Additional tool mount Paper roll clamp, holder and software Electric paper cutting Panel thickness of 500mm Saw blade in X, Y, Z & C axes 350mm max panel thickness Saw blade in X, Y, Z & C axis 500mm max panel thickness. Inclination of the sawblade to one fixed angle Router complete with frequency inverter, mounted on the bridge for routing out openings in the panels. Complete with software controls and dust extraction.

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side Dsdpfsb Tmrvox Anzjwa 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: new, The Matrix Fast 500 is the latest in the Stromab range of automatic crosscutting machines, with a high speed upstroke saw action which depending on cutting paterns can give up to 40% more production than the standard machine. The machine is primarily designed for programmable and repetitive cutting from standard and / or random lengths of timber. The new high speed pneumatic saw unit with variable speed control, can also be set to limit the saw stroke when cutting smaller boards, helping to increase production even further. The pusher is fitted with a heavy duty rack and pinion drive feeding system, for fast and accurate positioning giving a high level of repeat cutting accuracy, the pusher is raised with a pneumatic cylinder forits return to its loading position, allowing the operator to prepare the next pack of timber on the table without having to wait for the pusher to return to its idle position. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while allowing the operator a clear view of the cutting area still gives complete protection. additional safety features include full length guarding of the rear of the pusher system, whilst there is a safety pull cord running along the length of the front infeed table. Programming and entering of cutting lists is simple with the on board Top 12 control unit. With a 12" colour touch screen display, offering a modern, robust and reliable control system with many innovative features and is ideally suited for a factory or workshop environment. As standard the machine now offers USB, ethernet and 3 levels of optimisation including "board sequence" ideal for repetitive cutting. The Matrix OPTI version offers an additional 3 optimisation criterias including "minimum waste" and automatic board length measuring suitable for random length boards. The Matrix DEFECT version offers all optimisation criterias, length measuring, a defect removal camera and timber grading. Additional options also include extended outfeed table, pneumatic side roller pressure, label and inkjet printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Dwjdpjb Tmwaefx Anzoa Specification Self braking motor 10hp Saw blade diameter 500mm Max cutting width 390mm ( refer to chart ) Max cutting height 150mm ( refer to chart ) Pusher unit 3000 to 15000mm Precision rack and pinion drive giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Positioning speed 100m/min Positioning accuracy + /- 0.2mm Elco TOP 12 control unit Touch screen with 12" colour display 1m outfeed table Dust outlets 2 x 100mm diameter