Used Double Stacker for sale (13,585)

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, total height: 2,353 mm, total length: 34,520 mm, total width: 5,380 mm, load capacity: 25,000 kg, main lifting speed: 4,000 mm/min, fine lifting speed: 670 mm/s, working height: 11,710 mm, Equipment: documentation/manual, 2 units of double-girder bridge crane with 2 wire rope hoists, 12.5T each. The two crane systems can be operated in tandem. Remote controls and spare control units are included in the sale. The crane systems have been maintained annually, and their condition is very good. The crane systems will be dismantled by the seller. Transportation is the responsibility of the buyer. Lrjdpoz Eghgefx Aazot

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, PRIBO PATERNOSTER STACKER OFFER INCLUDES 1. PROBO OUTFEED CONVEYOR WITH RIGHT ANGLE TRANSFER CONVEYOR. 2. PRIBO Q1020 PATERNOSTER STACKER. 4. 2X AUTOMATIC STICK MAGAZINES 1200MM. MINIMUM LENGTH APPROXIMATELY 1900MM. MAXIMUM LENGTH 4500MM. PACK WIDTH 1200MM PACK HEIGHT 1200MM MAX. CAPACITY 5 LAYERS PER MINUTE Lredpfxezv S H Se Aazet SUITABLE FOR STACKING AFTER MOULDER, TRIMMERS, RESAW, DET, ETC.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 252158, total length: 8,700 mm, total width: 1,400 mm, type of input current: AC, input voltage: 400 V, overall weight: 1,450 kg, Full functional. 5,3kW Digital angle-meters (which are add-on). Full operating documentation and electrical schemas. Lrodpfjz Dbwajx Aazjt Available to see at work on site.

Condition: used, MANFACTURER - PRO-ECO TYPE - PRECISION DOUBLE LOOP SLITTING LINE MATERIAL - GRAIN ORIENTED, NON-GRAIN ORIENTED, SILICON STEEL, COLD ROLLED STEEL SHEAR STRESS - 100,000 PSI - SILICON STEEL | 60,000 COLD ROLLED STEEL MAX YIELD STRESS - 80,000 PSI MIN YIELD STRESS - 30,000 PSI MAX COIL WEIGHT - 50,000 LBS ENTRY/EXIT MAX COIL WIDTH - 48" NOMIMAL (50" MAXIMUM) ENTRY/EXIT MIN COIL WIDTH - 8" ENTRY / 1" EXIT MAX COIL OD - 72" ENTRY / EXIT MIN COIL OD - 36" ENTRY / EXIT MAX STRIP THICKNESS - 0.025" IN - SILICON STEEL / 0.050" CRS MIN STRIP THICKNESS - 0.010" MAX CUTS - 32 LINE SPEED - 1200 FPM ELECTRICAL - 575 V, 3 PH, 60 CYCLE AIR SUPPLY - 80 PSI LINE DIRECTION - LEFT TO RIGHT MODE OF OPERATION - FULL LOOP DRIVE-SLIT, DOUBLE LOOP LINE COMPONENTS: COIL CAR MANDREL UNCOILER PEELER TABLE ENTRY PIT Lodpfx Aaszk Nitszert GUIDE TABLES INTERMEDIATE GUIDES FELT STAND BEFORE ENTRY SHEAR ENTRY SHEAR SIDE GUIDES SLITTING HEAD BUTECH SCRAP CHOPPERS EXIT TABLE PRESSURE & TENSION ROLL STAND EXIT SHEAR RECOILER WITH OVERARM SEPARATOR EXIT COIL CAR ALSO AVAILABLE: INTEGRATED PACKAGAING LINE, INCLUDING: EXIT TURNSTILE DOWNENDER WEIGHT SCALE UNDER SEMI-AUTOMATED BANDING LINE 5/8" STEEL BANDING PICK AND PLACE STACKER MAX CAPACITY 6000 LBS PER SLIT COIL ROTATING CAROUSEL EXIT CONVEYOR SEMI-AUTOMATIC STRETCH WRAPPING MACHINE WEIGHT STATION CONTROLS, HYDRAULICS AND ELECTRICS FOR LINE

Condition: used, Year of construction: 1988, type of input current: AC, input voltage: 400 V, saw blade bore: 32 mm, Equipment: documentation/manual, Saw for processing aluminum and plastic profiles + stop and measuring system AMS200 Ledpezvpzyofx Aazsrt Saw: Manufacturer: Elumatec Type: MGS72 Year of manufacture: approx. 1988 Saw blade diameter: 330 mm Saw blade bore: 32 mm Swivel range: 15°, 22.5°, 30°, 45° Lockable to the left and right Angle 0-45° adjustable in increments Speed: 3800 rpm Equipment: - Enclosure that can be folded open at the front and rear Stop and measuring system: Manufacturer: Elumatec Type: AMS200 With roller track and positioning electronics

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 219937, total length: 6,500 mm, total width: 1,600 mm, total height: 2,000 mm, type of input current: three-phase, input voltage: 380 V, overall weight: 1,200 kg, The Futura double saw is used for crosscutting wood and aluminum. Both the saw units and the saw blades are tiltable, enabling angled cuts. These machines prove particularly useful in all types of manufacturing operations. The Futura double saw is used for crosscutting wood. Both the saw units and the saw blades are tiltable, enabling angled cuts. These machines prove particularly useful in all types of manufacturing operations. Max. saw blade diameter: 450 mm Spindle diameter: 40 mm Safety devices: 2 pieces Pneumatic saw blade feed Lodpfxozvcp Rj Aazjrt Saw units adjustable at an angle of 45° Min. cutting length at 90°: 240 mm Maximum cutting length at 90°: 5000 mm Cutting width: 130 mm Cutting depth at 90°: 200 mm

Condition: good (used), Year of construction: 2002, functionality: fully functional, Machine-Details Stock-No. 1022-E06190 Type of machine Planer-Type Milling M/C - Double Column Make HEYLIGENSTAEDT Type Heynumill 2700-PF Year of manufacture 2002/2018 retrofit Type of control CNC Storage location Germany Country of origin Germany Delivery time Immediately Freight basis ex foundation Technical details x-travel 3000 mm y-travel 4000 mm z-travel 1500 mm Control Heidenhain TNC 430 M total power requirement 120 kVA weight of the machine ca. 83,2 t Additional information 3/5 axes CNC portal milling machine with integrated C-axis and changeable milling heads. The machine had a purchase price of € 1.4 million in 2002. An inspection in the seller's plant under power is possible after previous appointment. Condition: Lrsdpfxoz D Uwgo Aazot The machine was overhauled in 2018, costs of over € 100.000,-. - Drives of the X-axis renewed - New hydraulic power unit - Complete electrical wiring renewed - Spindle cooling unit new - 2 pieces longitudinal conveyors new - Coolant pump new - Cover complete X-axis new - Bellows Y-axis new - Exchange measuring ruler X-axis - Fork head spindle bearing new Belleville spring assembly new Drive motor A-axis new Spindle cone ground - Overhaul milling gear (2020) Working range Travels X-axis 3000 mm Y-axis 4000 mm Z-axis 1500 mm Max. column passage 2700 mm Max. Distance between work table and spindle nose: Lower edge of ram interface min./max. 660 mm / 2160 mm Workpiece table Length 3000 mm Width 2000 mm Load 4 t/m² T-slots 28 H8 Rapid traverse X-axis 15000 mm/min Y-axis 15000 mm/min Z-axis 15000 mm/min Equipment: CNC control Heidenhain TNC 430 M Milling heads: Straight milling head type FK 120/450 Outside diameter 280 mm Tool holder SK 50 power max. 67 kW max. speed 5000 rpm Coolant supply through the spindle, via adjustable nozzles 1-axis fork-type milling head type FK 100/2D tool holder SK50 power max. 67 kW max. speed 4000 rpm swiveling range A/B axis +105°/-95° Coolant supply via adjustable nozzles Coolant tank 1.000 l Chip conveyor system Change head station Weight specifications: 1 Y-slide 7000 kg 2 ram 10000 kg 3 column 1 8000 kg 4 column 2 8000 kg 5 crossrail 28000 kg 6 Bed/table 20000 kg 7 Hydraulic power unit 1000 kg 8 Cooling unit 1200 kg 9 Coolant tank ??? Total 83200 kg

Year of construction: 2003, condition: ready for operation (used), Built in: 2003 Size max: 480 x 320 mm Sizes untrimmed high folio lap: max 480 x 320 mm min 105 x 115 mm with Accessories: 90 x 80 mm Sizes untrimmed low folio lap: max 480 x 300 mm min 105 x 125 mm Mechanical Speed: 21" chain pitch 12.000 c/h Power consumption: max 11,0 kW Compressed air (to be supplied by purchaser): depending on configuration 6 bar working hours: 21466 thsd.h Equipment gathering chain & feeder • 6 station gathering track & chain • 4 flat pile feeders 370 • 1 cover folder feeder 1529 stitching unit • stitching unit 380 • transfer left • wire unwind device • thickness control/ plus-minus • 2 stitching heads HK 75 three knife trimmer • three knife trimmer 449 Lrsdpjizi Syefx Aazet knives • 2 sets of knives standards • 1 set of operator manuals • 1set of electrical diagrams • 1 spare part catalogue • 1 set of tools • further information • location: D-Helmstedt • machine can be tested under power • cleaned & checked available • immediately • additional feeders • double production device • small book attachment • compensating stacker • card gluer • Inline inserting machine with 2 up to 10 stations

Condition: used, Reportedly unused Sinclair Stainless Fabrications approximately 20,000 litre nominal capacity vertical 316L stainless steel fermenter/bioreactor, approximately 15,000 litre working capacity with (4) zone limpet coil jacket. Unit has a welded dished top and bottom. Internal rated -1/+3barG internal operating at 0-159degC. Internal coils rated -1/+5barG and limpet coils rated -1/+5barG operating at 0-159degC. Mixer Drive = Nominal Speed: 100 RPM; Motor: 55KW 1500RPM 250 IE3 IP55 3PH 230/400V 50HZ; Gearbox Input Coupling: Integral w/Gearbox; External Paint Finish: Standard Paint; Colour: Blue RAL5005 Mounting = Arrangement: Structural Nozzle w/Flange Shaft Seal = Mechanical Seal: Custom Seal - No Bearing Balanced (AES CDM C/SiC/C/SiC-AFLAS(3) - Double Mechanical Seal. ) Mounting Flange = Flange Size: DN400 [16”]; Flange Class: CL-150; Flange Material: 316 Stainless Steel Face & Core Shaft = Shaft Diameter: 4-1/2”; Shaft Extension: 6754 mm; Shaft Material: 316 Stainless Steel Impellers = Impeller #1: 921 mm BT-6; Impeller #2: 959 mm W-4; Impeller #3: 959 Lrodpoyln E Rsfx Aazot mm W-4; Impeller #4: 959 mm W-4; Impeller Material: 316 Stainless Steel Mixer Options = Gearbox with Food Grade Lubricants Design Compliance = Machinery Directive 2006/42/EU Specifications: Capacity: 15,000 L Type of stainless: 316L Internal Pressure: -13 bar Internal Temperature: 0°C Jacket Pressure: -15 bar Jacket Temperature: 0°C Diameter: 1,800 mm Straight Side: 5,900 mm Legs/Lugs: Mounted on (4) legs Weight: 6720kg Dimensions: 2400mm diameter x 7500mm height

Condition: good (used), Year of construction: 2010, functionality: fully functional, cutting length (max.): 100,000 mm, feed length X-axis: 5,050 mm, saw blade diameter: 550 mm, type of input current: three-phase, saw blade speed: 2,800 rpm, input voltage: 380 V, air pressure: 6 bar, overall weight: 1,800 kg, The Twin Electra 550 is a double mitre saw with 3 axes and an automatically adjustable saw head on linear guides. Electronic control of all mitre angles via a brushless motor, from 45° (inward) to 22°30’ (outward), with a precision of 240 positions per degree. – Connection to window manufacturing software (orgadata / Unilink / Wictop... etc.) is possible. The machine features the following equipment: - Industrial PC with Windows - Additional clamping device on the roller conveyor - Automatic profile support - Shortcut function - Overlength cutting Ledpfx Asz Adxgsazort - Crosscut - Automatic cutting - Connection to external software is possible (Orgadata, Unilink, Wiktop... etc.)

Condition: good (used), Year of construction: 2008, total length: 2,000 mm, total width: 1,600 mm, total height: 1,900 mm, overall weight: 800 kg, For Sale: Tromp Guillotine / Dough Divider For dividing/cutting dough pieces. This guillotine is suitable for croissants, ciabatta, etc., and can be used for all types of divided products. It can also be integrated into a lamination line. - Brand: Tromp Lsdpfx Aaozvdbnszort - Type: Guillotine / Dough Divider - Blade is easy to replace - Servo-controlled - Controller type: Lenze - Blade width: 780 mm Overall dimensions: 2000 mm x 1600 mm x 1900 mm It is possible to view this machine on-site. If you have any questions or comments, please do not hesitate to ask. Sincerely, Leo Holland

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Ledjzvfp Hspfx Aazsrt Post-travel: max. 10 mm Motor power: 3 kW

Condition: used, Year of construction: 1996, operating hours: 20,700 h, load capacity: 41,000 kg, lifting height: 15,000 mm, fuel type: diesel, construction height: 4,800 mm, gearing type: automatic, Equipment: cabin, head guard, 2 units available. Location is between Munich and Nuremberg. Inspection and pick-up by appointment in the Munich area. All inspections have been carried out. Good condition. New Mercedes engine, 222 kW, 302 hp, 302 engine hours, 1150 total hours. Viewing by appointment only. F 198 Ferrari Width front: 4250 mm Lrodpfx Aaszfykqszst Rear: 3360 mm Chassis length: 8800 mm Overall height: 4570 mm Chassis height: 3350 mm A? Bock Total weight: 66,800 kg - 9500 kg spreader? 8500 mast

Condition: used, mileage: 713,128 km, power: 368 kW (500.34 HP), first registration: 04/2019, fuel type: diesel, number of seats: 81, gearing type: automatic, next inspection (TÜV): 04/2027, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final agreement, errors, typographical errors, and prior sale: Neoplan Skyliner L, 3 stars, 81+1+1, double-decker (Vehicle 79) First registration: April 17, 2019 713,128 km Engine: 12,419 ccm 368 kW / 500 hp Euro 6, C, M, N MAN Truck & Bus MOT valid until 04/2027, next inspection due 07/2027 Permissible gross vehicle weight: 26,000 kg Unladen weight: 19,024 kg Payload: 6,976 kg Overall length: 14,000 mm Overall width: 2,550 mm Overall height: 4,000 mm Base color: white, blue foil Without luggage compartment Tow hitch 81+1+1 Xenon headlights Dual auxiliary headlights Top-mounted windshield wipers Tow hitch Without luggage compartment Lane keeping assist with adaptive cruise control and emergency braking assist Sleeper cabins converted into trunk space DAB radio with large screen and navigation ZF Intarder Multi-function steering wheel Automatic climate control, auxiliary heater Wireless microphone Emergency stop Toilet, switchable between chemical and water (winter operation) 2 x 40-cup coffee machines Microwave Sink Refrigerator, front and rear Partial leather + fabric + leather headrests with armrests and seatbelts Armrests, footrests 220-volt voltage converter 2 screens below, 3 above Stone chips in windshield Camera system, interior, doors, rear Winter tires on 1st and 2nd axles, ALCOA alloy wheels 3rd axle, steerable and liftable (lift axle) Ledpfjzwazmjx Aazsrt Tires 315/70R22.5, 1st axle approx. 90/20%, 2nd axle approx. 40/40%, 3rd axle approx. 20/20%, 3rd axle approx. 60/20% Spare wheel In 12/2025, high-pressure cooler, water and air pressure valve for retarder renewed, invoice for €18,000.00 available Price: €240,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties is the Ludwigslust District Court for disputes up to €5,000.00; for disputes exceeding this amount, it is the Schwerin Regional Court. Errors, typographical errors, and prior sale are subject to change.

Condition: used, Year of construction: 2003, operating hours: 20,500 h, load capacity: 45,000 kg, lifting height: 16,000 mm, fuel type: diesel, construction height: 4,800 mm, gearing type: automatic, Equipment: cabin, head guard, 2 units available; location is between Munich and Nuremberg. Inspection and collection possible near Munich. All inspections have been carried out, good condition. Volvo engine 174 kW. Viewing by appointment only. F 365 Ferrari Ledpfx Aaezfylhozjrt Front width: 4250 mm Rear: 3360 mm Chassis length: 8600 mm Overall height: 4700 mm Chassis height: 3660 mm (A-frame) Weight: 65600 kg, 9500 kg spreader, 8500 kg mast Chassis weight: 47600 kg Transport dimensions/weight

Condition: good (used), Year of construction: 2007, Main sheet format: max 334 x 272 mm; min 194 x 145 mm Single feeder format: max 334 x 272 mm; min 148 x 105 mm Double feeder format: max 320 x 272 mm; min 148 x 105 mm Product thickness: max 13 mm Blowing air: 1.5 bar Compressed air: 6 bar Lsdpfx Aoqrqx Doazert Speed: max 30,000 c/h Equipment - Main product feeder - Opening station - 6 insert stations - Display Optional accessories: --- not included in scope of delivery --- - additional feeder - compensating stacker - Automatic tying machines - Wrapping machines - palletizer

Year of construction: 2007, condition: good (used), Technical Data: Size: max 480 x 320 mm Sizes untrimmed high folio lap: max 480 x 320 mm min 105 x 115 mm with Accessories 90 x 80 mm Sizes untrimmed low folio lap: max 480 x 300 mm min 105 x 125 mm Mechanical Speed: 21" chain pitch 14.000 c/h Power consumption: max 11 kW Pressure-vacuum pump depending on configuration Compressed air (to be supplied by purchaser) depending on configuration 6 bar Equipment: Gathering chain & feeder: · 8 Station gathering track Feeders: · 5 Feeders 370 Cover folder feeder: · 1 Cover folder feeder 1529 Stitching unit: · 1 Stitching unit 390 · 1 18" inch chain pitch · 1 Transfer right · 1 Wire unwind device · 1 Thickness control/ plus-minus · 1 Oblique sheet control Stitching heads: · 2 Stitching heads HK 75 Three knife trimmer: Lrsdpfemn Sk Nsx Aazot · 1 Three knife trimmer 449 Knifes: · 2 Sets of knives Standards: · Standard accessories Condition: · working condition Availability: · immediately · Machine can be visited in production Optional equipment (not included!): · additional feeders · double production device · compensating stacker · card gluer · inserting machine · inkjet systems All technical data is for information purposes only! Although the technical information is mostly taken from manufacturers documents, no guarantee can be given for correctness due to e.g. undocumented changes of the equipment. By no means are these values intended to be binding or part of the contract.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: DLM 705, overall weight: 8,000 kg, The machine is in good overall condition. Price is negotiable after inspection. Lodpfx Asz Aquzeazjrt

Condition: used, BRET Press blanking line 830x4 Technical characteristics Width: 100 - 830 mm Thickness: 1 - 4 mm Max. weight: 20 Tn Exterior diameter: 900 - 2100 mm Interior diameter with segments: 610 mm Interior diameter without segments: 508 mm Decoiling: from top or from bottom Engine power: 55 kW Elastic yield (for max. thickness): 650 Rm (Mpa) Tensile strength (for max thickness): 900 Rm (Mpa) Scope of supply 1. 4 arms coil loader turnstile 2. Coil carriage 3. Single cantilevered decoiler with hold down roll 4. Opener & centring unit 5. 17 rolls leveller 6. Pit accumulator entry basket 7. Exit basket and pulling unit 8. A 700 tons Press 9. Press side exit (2 bands) 10. Double traverse conveyor with deviation and tilting unit 11. Main stacker 12. Side tacker #1 13. Rollway at stacker’s exit #1 14. Side stacker #2 15. Rollway at stacker’s exit #2 16. Video inspection camera system 17. Pallet introduction rollways for side stackers 18. Magnetic scrap conveyor 19. Operator desks 20. Switch cabinets 21. Hydraulics 22. Existing documentation (to be checked) 23. Available spare parts DELTA Measuring system · Number of measured edges: 2 · Width capacity: 100 - 800 mm BRET Leveller · First level rolls: Ø 55 mm · Number: 17 · Thickness: 0,8 - 4 mm Ledpoymbg Djfx Aazjrt · Driving Power: 110 kW Press · Size of press: 800 mm · Blank length: 100 - 1790 mm · Length tolerances: +/- 0,25 mm · Pressure: 320 Tn · Maximum speed: 100 m/min Cuts/min with tensile strength = 500 Mpa · 130 cuts/min for minimum length · 80 cuts/min for 500 mm · 52 cuts/min for 1.000 mm · 38 cuts/min for 1.500 mm Engine power: 55 kW Stacker by gravity · Number of tables: 1 · Length: 1750 mm · Chain conveyor · Positions per table: Length 5 & Width 3 · Maximum stacking height (including wood): 650 mm · Kind of pallets: Wood spacers / Square + plank / Square + square · In-line weighing Side stackers by gravity · Number of exits: 2 bands · Length 100-800 · Tilting device · Stacker height 650 · Buffer system while changing stacking column · Pallet input front the back side · Scale In both exits Magnetic scrap conveyor Video inspection system Width: 100 - 830 mm Thickness: 1 - 4 mm Max. weight: 20 Tn Exterior diameter: 900 - 2100 mm Interior diameter with segments: 610 mm Interior diameter without segments: 508 mm

Condition: excellent (used), Year of construction: 2020, Ref:11144. 2020 Horizon BQ-480 EVA Late model perfect binder in excellent condition. Perfect binder designed for operation by one person with moveable touch-screen control panel for easy set-up. Customised set-up accounting for paper type, signature or loose sheet, sewn book blocks, notch binding, etc. Comprising: BQ-480 binder with hand feed station and 4 clamps Height adjustable LCD colour touchscreen for full automation of the following areas: • Main clamp book width • Milling head • Spine glue length • Cover size & scoring • Cover nipping unit • Book delivery width Milling & roughing unit with dust bag extraction EVA hotmelt roller type spine gluing tank EVA hotmelt side gluing discs with glue length cut-off Lrjdpfx Aaoz Aklaozjt Auto suction cover feeder with scoring and double sheet detection Improved delivery table for gentle handling of thicker or PUR bound books. Including accessories, tools & manuals. Accessories: Auto calliper book measuring device, for quicker make-ready. Specification: Book size, Max: 320 x 320 mm Min: 145 x 105 mm Open cover size, Max: 320 x 670 mm Min: 135 x 225 mm Book thickness : 1 to 65 mm Mechanical speed, Max: 1,350 cycles/hr

Condition: used, Year of construction: 2000, pressing force: 260 t, stroke length: 250 mm, table width: 840 mm, table length: 1,500 mm, air pressure: 9.807 bar, compressed air connection: 9.807 bar, ram adjustment: 120 mm, We are offering this used Chin Fong OCP-260N eccentric press with double column, year of construction 2000. Model: OCP-260N Factory number: A00373 Year of construction: 2000-11 Capacity: 260 tons Stroke frequency: 20–40 strokes/min Stroke: 250 mm Maximum die height: 500 mm Upper bolster clearance: 7 mm Slide adjustment (range): 120 mm Upper platen surface (L × W): 1130 × 700 mm Lower platen surface (L × W): 1500 × 840 mm Main motor power: 22 kW Poles: 4 Machine weight: 31.8 tons Compressed air pressure: 9.807 bar Oil temperature max.: +100 °C Oil temperature min.: -10 °C Lredpfxsykbcmo Aazst Oil volume: 180 liters If you have any questions or need more information, please feel free to send us a message or call us.

Condition: good (used), functionality: fully functional, machine/vehicle number: 924115, rotational speed (min.): 3,000 rpm, grinding wheel diameter: 200 mm, Original GREIF double grinding wheel stand including base Lsdjzzphqspfx Aazjrt including CEE plug Power: 0.55 kW

Condition: used, Year of construction: 2011, We are offering this used Wegoma DS 130 BC miter saw, manufactured in 2011, for sale. Type: DS 130 BC Serial number: 09438 Year of manufacture: 09/2011 Lrsdez Ag Ecepfx Aazjt If you have any questions or require further information, please feel free to send us a message.

Condition: used, Year of construction: 2020, Used, heated/cooled pressure vessel Article number: 10901 Last known use: Unknown Volume: 1200 liters Type: Standing, on 3 legs Material (media-contacting): 1.4301 / AISI 304 Dome lid: Ø 400mm Max. operating pressure: +1.27 / -0 bar Operating temperature: +50 / -10 °C Design: Double-walled Vessel dimensions: Outer diameter: 1000mm Ljdpfxozuw Sko Aazsrt Cylindrical height: 1150mm Overall width: 1000mm Overall length: 1150mm Overall height: 2750mm Materials: Inside: 1.4301 / AISI 304 External parts: 1.4301 / AISI 304 Features: Outlet diameter: 25mm Distance from outlet to floor: 325mm / 825mm Height of legs: 1240mm Nameplate: yes Nozzle on the top head

Condition: like new (used), Year of construction: 2009, Double-jib slewing crane, like new, very little used. Hardly any operating hours recorded in the documentation, as the company ceased assembly after a short period. Comes with inspection and UVV certification documentation. Lrsdpsz Dup Aefx Aazet