Used Draloric Resistance for sale (1,839)

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full equipment details available on request. Chassis, cranked * Special steel frame made of high-strength fine-grained steels, electric welded at connection points, well-dimensioned outer frame * 4-axle configuration. Wheel covers above the axles with spray suppression * All steel parts sandblasted * Side underrun protection mounted, made of anodized aluminum * Increased point load capacity approx. 30,000 kg over approx. 4,000 mm * Special construction in the cranked area for the largest possible low-bed length in combination with AluLeg drop supports instead of telescopic spindle landing gears, max. rear swing radius of the tractor unit approx. 2,100 mm Special body with rear stanchion extension * Self-supporting aluminum roof girder/profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stanchions expandable to approx. 4,200 mm * Three sliding stanchions per side with rubber tension relief * Additional central stanchion latches in the roof girder and parking position, operable by pull cable and spring latch * Mechanical lifting roof with height adjustment, lifting roof height approx. 400 mm, operable from both sides or one side only, without opening the opposite side and doors * Additionally, height adjustment of approx. 480 mm in approx. 40 mm increments via height-adjustable stanchions * Front cover on the bulkhead for driving under tarp up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on each side, 450 mm pockets at bottom, four rows of single pockets above * In the high-bed only 3 rows of insertable slats. Intermediate distances evenly distributed Floor * Approx. 27 mm special water-resistant bonded beech multiplex boards, rough surface * Steel plate in the wheel arch area * Forklift suitable according to DIN ? standard * Flush outer frame surface Brakes * WABCO air brake system with EBS according to EC standard 71/320 EEC incl. PREV (Park Release Safety Valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and axle load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low loader design * Air suspension with lift and lowering function, total stroke approx. 230 mm * Third and fourth axle as friction-steered trailing axles with electric and mechanical lock Twin tyres * 235/75 R 17.5, -16 ply, incl. spare wheel holder, without spare wheel Paintwork * Chassis in RAL 3002 red, single colour * Central stanchions, axles KTL-coated black * Corner stanchions hot-dip galvanized * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Body single-colour in RAL shade Special equipment included * Air suspension in ECAS version, operation on the semi-trailer * Oversize signage front and rear, galvanized, stepless telescopic, with attached marker lights incl. sockets for revolving beacons (small plates) * Additional sliding roof frame release from outside * 4 stanchion adapters for special outer frame profile, for arbitrary locking of central stanchions Godpfx Anslthgueleuc * PVC sliding tarpaulins, color similar to RAL 9006 silver * Translucent roof tarpaulin, oversize and overheight specification, flat hooks, tarpaulin folds, closures with locking pawl/OCS * Rear left telescopic socket for warning beacon incl. light * Outer frame for machine transport with approx. 64 lashing poin

Condition: used, axle configuration: 3 axles, first registration: 09/2008, loading space length: 9,700 mm, loading space width: 2,350 mm, loading space height: 2,165 mm, loading space volume: 50 m³, Chassis ALU chassis, aluminium alloy 5383H34 Two fully automatically welded T-profiles (width 200 mm) Corrosion protection between steel and aluminium components, continuous rubber bonded under pressure onto the longitudinal beams for maximum stability via integrated tipping bearing shaft with wear-resistant, pressed-in special bushes, chassis width approx. 1,600 mm, air and electrical lines integrated in a plastic conduit. Axles and Suspension, Disc Brakes Jost-disc axle assemblies 3 x 9 tons with DCA air suspension, lift and lower valve, load pressure gauge, 3rd axle automatically liftable Godpfx Aoxf Spfsnlsuc Tyres and Wheels 6 wheels fitted with 385/65 R 22.5 tyres approx. 50–60% tread remaining, on silver steel rims, 11.75x22.5 ET 120 Landing Gear Mechanical support legs, 2 x 20 ton load capacity, pivoting feet used for air suspension systems Brake System In compliance with EC standards, dual-circuit Wabco system, spring-loaded parking brake acting on two axles, EBS-E system Wabco 2S/2M, with RSS system (Roll Stability Support), aluminium air tanks Electrical System According to German Road Traffic Licensing Regulations (StVZO) with two five-chamber Aspöck LED lights, 24V system with two 7-pin and one 15-pin sockets at front, EBS socket, LED side marker lights, 2 clearance lights, 2 separate LED reversing lights Tipping Body / Bin ALU bin, side walls with welded vertical aluminium profiles, floor approx. 6 mm thick wear-resistant aluminium alloy (5383H34), Brinell HB 110, front wall sloped design in 4 mm ALU with reinforcement profiles for tipping cylinder mount, side walls in 3 mm hard alloy, straight rear wall, universal door with automatic-pneumatic (lockable) swinging and 2/3-1/3 split hinged tailgate, double linkage, manufactured from 4 mm aluminium, 1 grain chute with water protection, wear plates on sides approx. 400-1,000mm x 3,000mm x 4mm Hydraulic System Hydraulic cylinder mounted on front wall with working pressure 150 bar, make: Edbro, with approx. 2 m hydraulic hose and 1" loose half-coupling Accessories 6 Parlok plastic mudguards with 2 Stas mud flaps, 3 m aluminium ladder, reinforced underrun protection in folding execution with 2 towing eyes, 1x folding side guard, walkway on front wall with side access ladder (left), 3 ALU hoops in pivoting design, 1x centre hoop support, rolling tarpaulin with central aluminium tube, rolling tarpaulin system, tarpaulin approx. 660 g/m², quick-release fastener (without tension belts), wheel spanner, 2x wheel chocks, toolbox type 800, continuous splash guard mounted on underrun protection, etc. Offer and pictures subject to change.

Condition: used, axle configuration: 3 axles, first registration: 09/2021, loading space length: 9,700 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, loading space volume: 53 m³, Chassis, Light Version Gujdpfx Anjyiw T Eolsc Aluminium (15-6-12) Two fully-automatically welded I-beam longitudinal members with welded cross members. Chassis width: 1,600 mm. Axles and Suspension: SAF-Intradisc light axle assemblies, 'off-road version', with 3 x 9 t disc brake axles (430 mm), SAF air suspension, centrally arranged to the chassis longitudinal members. 1st axle with liftable air bellows, starting aid and manual forced lowering. Smart Board Info Center, Hebert lowering valve, front load pressure gauge. Tyres and Wheels on Alloy Rims 6 wheels with tyres size 385/65 R 22.5 approx. 50% tread, 11.75 x 22.5 ET 120, UNI wheel bolts for alloy rims. Kingpin 2" screwed into an 8 mm thick 'light' plate. Landing Gear Support winches, load capacity 2 x 20 t, with swivel foot for air suspension. Braking System In accordance with E.G. standards, twin-line Wabco system, spring-actuated parking brake operating on two axles, with Wabco EBS-E including RSS (Roll Stability System), Wabco Smartboard Info Center, aluminium air reservoir system. Electrical System In compliance with StVZO guidelines, 3 round three-chamber lamps (Aspöck type), 24-volt system with 2x 7-pin and 1x 5-pin socket, 2x 7 side marker lamps, 2 central rear LED reverse lights, 1 round fog lamp, 4 LED work lights, 1 interior LED lamp, 4 red LED position lights in the door header. All air and electrical lines are neatly laid in plastic conduits. Tipper Body / Tipping Skip "Smooth Construction" Internal structure fully welded. Aluminium skip, side walls made from 30 mm thick plank profiles (2-3 mm), 600 mm wide and welded, floor plate 8 mm thick highly wear-resistant alloy (5383H34/HB 110) with 90-degree profile to side walls, front wall 4 mm reinforced in straight design, rear wall as universal door in straight design with 2 wing doors (1/2–1/2 configuration) and grain slide. Universal door operated automatically-pneumatically, separately lockable lever, rear frame in swing-out ALU design, two hold-downs with rubber buffers on the tipper skip fixed to the chassis at the front wall. Hydraulic System Tipping Cylinder with "Sheath" Suspension Hydraulic cylinder mounted on the front wall, operating pressure 150 bar, manufacturer Edbro, approx. 2.5 m hydraulic hose and loose end 1", tipping angle approx. 48 degrees. Accessories 6 Parlok mudguards, complete spray flaps across full vehicle width fixed to underrun protection, no spare wheel holder ALU, side underrun protection right side foldable, large tool box type 860, approx. 3 m aluminium ladder, 3 aluminium swing hoops in the centre approx. 150 mm elevated, additional central hoop support, roll tarp with central light strip and separate reinforcements in high wear areas, approx. 660 g/m² quality, tarp rolling system with quick tension closure, continuous rubber rope at rear edge with two tension hooks to be fastened to rear swing hoop, walkway on the chassis, rear tarp closure welded with rubber rope to prevent water ingress, robust folding underrun protection, 2 "Clear-Pass" spray flaps on mudguard (EG-compliant), aluminium grain funnel with sack fitted laterally to frame, holder for shovel, broom and scraper mounted above the axles, etc. Unladen weight: 5,950 kg Offer and images non-binding

Condition: new, functionality: fully functional, We offer a high-quality BOPP flat film (BOPPFF30040-1000) for industrial processing. Technical specifications: Material: BOPP flat film (PC100) Width: 300 mm Thickness: 0.040 mm Length: 1,000 meters Core: 76 mm Properties: Transparent, stable, and tear-resistant polypropylene film Ideal for packaging, lamination, and label applications High resistance to temperature and humidity Availability: Available for immediate delivery from stock. €2.00 per kg for pallet quantities Gjdpfx Anoyw Ib Rjlouc €2.30 per kg for quantities of 10 rolls or more 15% discount for purchasing 1 pallet containing 60 rolls.

Condition: new, Year of construction: 2025, functionality: fully functional, coil outer diameter: 1,500 mm, coil inner diameter: 508 mm, product height (max.): 200 mm, feed length X-axis: 1,520 mm, feed length Y-axis: 3,020 mm, feed length Z-axis: 80 mm, warranty duration: 24 months, total height: 2,380 mm, total length: 8,900 mm, total width: 2,300 mm, load capacity: 1,300 kg, input frequency: 50 Hz, input voltage: 380 V, overall weight: 180 kg, repeat accuracy: 0.02 mm, workpiece weight (max.): 15,000 kg, Equipment: cooling unit, GS-J Series has various workbench sizes such as 3015, 4015, 4020, 6015 to meet different processing needs Suitable for batch processing of thin plates with high flatness requirements of 0.6-3.0mm Uncoiling machine parameters: Maximum weight of coil (kg): 15000 Coil width (mm): 200～1524 Coil outer diameter (mm): Φ800～Φ1500 Coil inner diameter (mm): Φ508mm~Φ610mm Gusdpfxjv Awguo Anlec (cast iron pad) Coil thickness: (mm) 0.6-2.0mm (stainless steel) ≤1524mm 0.8-3.0mm (carbon steel) ≤1524mm Feeding length (mm): 0～ Maximum stroke of equipment Unwinding speed (m/min): 0～15 Moving speed (mm/s): 0-8 Lifting speed (mm/s): 3.0 Lifting stroke (mm) : 350 Leveling flatness (mm/㎡): ≤±3 Fixed feeding line height (mm) : 870 Sizing accuracy (mm/m) : Length direction ≤±0.2 Diagonal direction : ≤±0.8 Revolutionize Your Coil Processing with One Machine, Five Functions! Uncoiling, leveling, feeding, cutting, and blanking – all in one seamless automated system for maximum efficiency. Smart, Flexible & Versatile - Effortlessly cuts special-shaped workpieces, adapting to diverse production needs - Optional touchscreen control with top-tier international cutting systems - High-quality drag chain cables – durable, bend-resistant, and interference-free

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 20 kg, total width: 1,160 mm, total length: 1,160 mm, For sale is a high-quality Motan material distribution station (6x6) for the central supply of materials in plastics processing. The system has a robust design and is intended for continuous industrial use. The use of hardened steel profiles makes the material distribution station particularly wear-resistant and ideally suited for abrasive plastics. Thanks to its compact design on a pallet, it is easy to transport and can be quickly put into operation. Guodpfjzcvgwox Anlec

Condition: new, Year of construction: 2026, We have high-quality load banks from our standard production series for sale, with the following technical specifications: Condition: NEW Gusdpfx Anjfm T Eujljc Applications: - Load testing of emergency power generators and uninterruptible power supplies (UPS) - Grid stabilization through power consumption - Engine test benches Technical Features: - Load type: Ohmic resistance - Voltage: 400V, also available up to 800V - Frequency: 50/60 Hz - Power factor: 1 - Power: - 250 kW - 500 kW - 800 kW - 1000 kW - 1500 kW - 2000 kW - Load steps can be set via any key combination - Test report printout - Test automation, automatic activation of load steps Operation and Control: - Directly via the keypad on the load bank - Via remote control box (touch panel) - Via potential-free contacts - Optionally available with Modbus for integration into test automation Further Features: - Lockable flaps/doors to prevent dust accumulation during storage - Compact design - Lightweight - Portable - Robust construction with container frame - Forklift slots and crane lifting device Including electrical wiring diagrams Including manual Including software Delivery and commissioning possible for an additional charge.

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, loading space length: 13,600 mm, loading space width: 2,540 mm, loading space height: 1,550 mm, total length: 13,600 mm, total width: 2,540 mm, total height: 1,550 mm, suspension: air, tire size: 275 / 70 R22.5 – Good Year, color: red, Year of construction: 2024, Color: Red Load capacity: 60,800 kg Extendable Main Features Manufacturer: Faymonville Type: F-S44-1BBY Triple Extendable Flat Bed Chassis number: YAFSR4009S0036724 Year: NEW / Unused Weights/Loading Capacity King-pin load: 28,000 kg Axle load: 12,000 kg Total axle load: 48,000 kg GVW: 76,000 kg Empty weight: 15,200 kg Loading capacity: 60,800 kg Axles Brand Axles: BPW Air suspension All axles with hydraulic steering WABCO braking system with EBS Tires: 275 / 70 R22.5 – Good Year Load index 148/145M Dimensions Length: 13,600 mm Extensions: 7,200mm + 7,400mm + 7,600mm Max extended length: 35,800 mm Loading floor width: 2,540 mm Height: 1,550 mm (+/- 100 mm) Additional Information High resistance metallization of steel construction NATO plug Lashing rings Stake pockets Wooden loading floor Mechanical landing gear Electro-hydraulic pump for trailer functions Guodpfx Ansv I Dqqslec Spare wheel Rear bumper with lights King-pin 2.0” + 3.5″ Central lubrication with 2 BEKAMAX pumps = Further Information = General Information Year of manufacture: 2024 Axle Configuration Tire size: 275 / 70 R22.5 – Good Year Axle brand: BPW Suspension: Air suspension Rear axle 1: Dual tires; Max. axle load: 12,000 kg; Steerable; Tire tread depth left inner: 100%; Tire tread depth left outer: 100%; Tire tread depth right inner: 100%; Tire tread depth right outer: 100% Rear axle 2: Dual tires; Max. axle load: 12,000 kg; Steerable; Tire tread depth left inner: 100%; Tire tread depth left outer: 100%; Tire tread depth right inner: 100%; Tire tread depth right outer: 100% Rear axle 3: Dual tires; Max. axle load: 12,000 kg; Steerable; Tire tread depth left inner: 100%; Tire tread depth left outer: 100%; Tire tread depth right inner: 100%; Tire tread depth right outer: 100% Rear axle 4: Dual tires; Max. axle load: 12,000 kg; Steerable; Tire tread depth left inner: 100%; Tire tread depth left outer: 100%; Tire tread depth right inner: 100%; Tire tread depth right outer: 100% Weights Empty weight: 15,200 kg Load capacity: 60,800 kg GVW: 76,000 kg Functional Loading platform height: 155 cm Extendable superstructure: Yes Condition Technical condition: very good Optical condition: very good

Condition: new, mileage: 500 km, power: 315 kW (428.28 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 7 m³, Equipment: ABS, air conditioning, navigation system, Mercedes Benz Arocs 5 3243B 8x4 EURO6 OBD-E with Stetter FBP 26-4 Pump Mixer, 7m3 Capacity, 125mm Pipework (PUMI) First Registration: Unregistered Guedendcvtopfx Anloc Kilometers: 500 Color: Arctic White Technical Data * Power: 315 kW (428 HP) * Tires (front & rear): 315/80R22.5 * Gross Vehicle Weight: 32,000 kg * Emission Class: Euro 6, OBD-E * Transmission: Automatic, Mercedes Powershift 3 * Condition: New Vehicle Chassis Equipment * M-Cab Classic-Space, 2.30m wide, 320mm tunnel * Comfortable cab suspension * Straight front axle, 7.5t with 2x 7.5t 4-leaf springs * Rear axle with 13.4t planetary gear and 2x 10t heavy-duty springs * Gearbox oil cooling * High Performance Engine Brake * Front air intake * 320L aluminum diesel tank + 25L AdBlue tank * Disc brakes front and rear * Sun visor * Air conditioning * ABS + ASR * Comfort driver's air suspension seat, velour leather * Multimedia Interactive incl. navigation and Bluetooth * Reversing alarm * CB radio and tolling pre-installation * Daytime running lights * Pre-installation for beacon lights Superstructure Equipment * Schwing-Stetter FBP 26-4 pump mixer with 7m3 drum * Concrete delivery line: Super 2000, 125mm diameter * Maximum horizontal reach: 20.52m * Maximum vertical reach: 25.10m * Placing boom FBP 26/4, 4-arm * 380° slewing range * Pump type: P1020-90/50 * Theoretical output: 61m3/h * VECTOR control system * Filling height approx. 1350mm * Pump cylinder diameter: 200mm * Water tank: 650l with gauge * Radio remote control * Work lights * AM 7 C4 FBP mixer unit * Hardox 500 TUF wear-resistant material (spirals Hardox 500 TUF) * Rated capacity: 7m3 Non-binding offer EXW Cologne. Intermediate sale and errors excepted. Sale to business customers only. We speak German - We speak English - Hablamos español - Nous parlons français - Мы говорим по-русски - م نتحدث العربية

Condition: ready for operation (used), functionality: fully functional, total width: 1,784 mm, total length: 3,660 mm, total height: 2,629 mm, overall weight: 2,300 kg, The item is offered as a "Premium Listing" – the sale is qualified and curated by Maschinensucher. TECHNICAL DETAILS Application: Storage of hazardous substances in liquid or solid form Used in a large German corporation in compliance with applicable regulations and maintenance recommendations. Dimensions External dimensions (W x D x H): 3,660 x 1,784 x 2,629 mm Clear internal dimensions (W x D x H): 2,917 x 1,440 x 1,954 mm Storage capacity IBC storage capacity: 2 Drum storage capacity: 8 Load capacity / Containment volume / Weight Load capacity: max. 1,250 kg/m² Containment volume: 1,150 l Empty weight: 2,300 kg Basic data / Environmental load Density of liquid: max. 1.9 kg/dm³ Flash point: > +55 °C Wind load: max. 0.39 kN/m² Gsdoy Ux Atepfx Anlouc Snow load: max. 2.50 kN/m² Fire protection / Fire resistance Fire resistance of container: REI 90 Fire resistance of door elements: EI2 90-C Validity of classification report: until 30.11.2021 Spill containment / Approval Approval number: Z-38.5-337 Validity of approval: 25.10.2022 to 25.10.2027 Minimum sheet thickness: 5 mm Average surface load HSR 315 / 615: max. 12.5 kN/m² Filling level HSR 315 / 615: max. 460 mm EQUIPMENT Tested spill containment Safety lock Lifting points Supporting frame made of hot-dip galvanized base material External cladding made of fire protection panels Fire-resistant door Technical ventilation Note: The dismantling and loading of the item must be organized by the buyer.

Condition: used, mileage: 63,345 km, power: 125 kW (169.95 HP), first registration: 07/2024, fuel type: diesel, empty load weight: 2,428 kg, maximum load weight: 1,072 kg, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 3,665 mm, fuel: diesel, color: white, gearing type: automatic, suspension: other, number of seats: 3, total length: 5,932 mm, loading space length: 3,272 mm, loading space width: 1,780 mm, loading space height: 1,940 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, had accident, onboard computer, sliding door, soot filter, traction control, Disc brakes, double passenger seat, rear step, interior trim, wooden cargo floor, L2 wheelbase, right-hand side mirror electrically adjustable, H2 roof height, air suspension seat, high roof, touchscreen, partition, accident damage, heat-resistant glass, clock & tachometer, brake pad indicator, active headrest, 3-door, 1st owner, Euro6e, green environmental badge (4), steel rims, puncture repair kit, rear view camera, black, passenger airbag, sliding door on the right, navigation system with color monitor, color monitor for navigation system, shift paddles, parking assistance camera, parking assistance sensors rear, parking assistance sensors front, traction control, electric windows (2-way), seat heating, radio/MP3, outside temperature display, tinted glass, heated exterior mirrors, power steering, wood trim, electric exterior mirrors, brake assist, comfort seats, rear-wheel drive, 3rd brake light, center armrest, German version, additional features available, errors and prior sale excepted, trade-in possible, financing possible, please contact us, we will prepare a customized offer for you. A50 front axle with increased load capacity, AR2 axle ratio i = 3.923, BA3 active brake assist, BH1 HOLD function, C6L multi-function steering wheel, CL1 steering wheel adjustable in inclination and height, CT1 vibration damper, CW2 deletion of vehicle lowering, D03 high roof, D50 continuous partition, E07 hill start assist, E1B storage compartment for smartphones incl. wireless charging, E1D digital radio (DAB), E1E navigation, E1U USB socket 5 V, E46 socket in the cab, E57 electrical system for trailer socket, E7M MBUX multimedia system, ES0 jump start - contact, ES5 charging package dashboard, EW6 pre-installation for Remote Services Plus, EY2 Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 breakdown management, F2W winter package, F64 electrically folding exterior mirrors, F68 heated and electrically adjustable exterior mirrors, FF4 storage compartment above headliner, FF5 storage compartment above windshield, FJ1 folding cover for storage compartment, FJ4 storage compartment under cockpit, FKA VAN, FM3 Guodpfjzdamwsx Anlsc

Condition: used, mileage: 27,105 km, power: 62 kW (84.30 HP), first registration: 03/2022, overall weight: 4,800 kg, fuel type: diesel, color: silver, axle configuration: 4x2, maximum load weight: 1,850 kg, empty load weight: 2,950 kg, next inspection (TÜV): 11/2026, wheelbase: 1,900 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, Equipment: additional headlights, air conditioning, cabin, cruise control, onboard computer, parking sensors, soot filter, * German vehicle * 1st owner * Original 27,105 km * Only 3,310 operating hours * Condition, see photos * Ideal for narrow streets, pedestrian and cycle paths, extremely maneuverable thanks to articulated steering * 3-brush sweeping system – 2 side brushes left and right Ø 800 mm – shock-resistant brush mounting * Third front brush for a sweeping width of 2,700 mm and for cleaning corners and ramps, usable on both left and right * Floating, wide suction mouth made of cast aluminum between the front wheels * Debris container made of stainless steel, hydraulically tiltable and closable, capacity 2.0 m³ * Smart-Con control unit: multifunction armrest with Smart-Start function enables operation of all work functions single-handedly * Comfortably sprung, sound-insulated aluminum cabin with two seats * Infinitely variable hydrostatic drive. Two driving modes with automatic, load-dependent electronic control. * Air-conditioning * Road speed 50 km/h * Working speed up to 15 km/h * Emissions standard Euro 6d * Engine displacement 2,970 cc with 62 kW * Fuel tank 80 L * Parking assist camera * Side cameras left & right * Rotating beacon * Additional headlights * Heated exterior mirrors * Wheelbase: 1,900 mm * Gross vehicle weight 4,800 kg * Curb weight 2,950 kg * Payload 1,850 kg * Self-propelled working machine If a new TÜV inspection is desired, we are happy to provide a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, no new DGUV, no new SP, no new UVV. You can find further commercial vehicles on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the item to ensure the buyer has a correct understanding regarding condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly welcome. Guedpfx Ajy E Tuxsnlsc All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale and errors.

Condition: used, axle configuration: 1 axle, first registration: 10/2016, color: red, power: 15 kW (20.39 HP), gearing type: other, driver cabin: other, * German trailer * 1st owner * Condition – see photos * TRILO VANMAC SU60 leaf vacuum * The SU60 suction units are specifically designed for the rapid collection of leaves, debris, grass, wood chips, etc. * The TRILO® SU60 suction unit is mounted on a roadworthy chassis suitable for high-speed transport (up to 80 km/h) and can easily be coupled to your vehicle, allowing you to transport and start using it anywhere. * The SU60 comes standard with a 5-meter-long hand hose equipped with a robust end tube and handle. * The SU60 is powered by a reliable Honda 2-cylinder, 20 HP petrol engine with electric start. * The 600 mm diameter radial fan is enclosed in a wear-resistant double-walled housing and driven by a V-belt. * 5-meter-long hand hose * Adjustable, 360-degree rotatable discharge spout * Ø 600 mm turbine fan * Replaceable wear plates * Statically and dynamically balanced * Easy cleaning via dirt water drain cap * Unladen weight: 440 kg If you require a new technical inspection (TÜV), we will gladly obtain an offer from our partner workshops. Gsdpfx Anexu Nn Djlsuc Our offer is generally WITHOUT new TÜV, without new DGUV, without new SP, and without new UVV inspections. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the item to avoid misunderstandings about its condition and suitability. Viewing and inspection are possible at any time by appointment and are expressly desired. All information provided without guarantee. We do not accept liability for errors or incorrect information in this offer. The buyer is obliged to verify the condition and features of the item/vehicle independently. Subject to alterations, prior sale, and errors.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, laser type: fiber laser, laser source manufacturer: Max Photonics, laser source model: MAX 6kW mit CE, laser power: 12,000 W, sheet thickness (max.): 80 mm, sheet thickness steel (max.): 80 mm, sheet thickness stainless steel (max.): 60 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness brass (max.): 50 mm, sheet thickness copper (max.): 50 mm, table length: 6,000 mm, table width: 2,500 mm, working length: 6,000 mm, working width: 2,500 mm, positioning accuracy: 0.3 mm, repeat accuracy: 0.3 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, overall weight: 13,500 kg, total length: 14,500 mm, total width: 4,500 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Fiber laser cutting machine 6025, 30 kW – Overview Safety & Protection Fully enclosed metal enclosure with radiation-shielding doors and windows. Guodpfxozb Uinj Anlsc Environmentally friendly and safe for operators. Work platform High and low, parallel platform: Front end: Laser cutting. Rear end: Loading and unloading. No mutual interference → increased work efficiency. Machine structure 30 kW bed structure: Time-shared, segmented dust extraction. Excellent heat dissipation, resistant to thermal influences. Industrial accessories: Air conditioning, special cooling system, constant temperature & humidity → stable performance & longer service life. Precision guarantee: Bed processed by a large gantry milling machine. Industrial guide rails, gears, screw supports. Complete servo control, double-sided dual drive. High industrial quality and precision. German assembly technology: Precision calibration with laser interferometers Fine craftsmanship, easier maintenance. Control & Software FSCUT 6000 control system (included). FSCUT software package: Market-standard, safe, and user-friendly software. Supports intelligent networking. Professional nesting software: CypNest (included). Core components Laser cutting head BOCI BLT442 Laser source MAX 30 kW, CE Water cooler HANLI 20 kW Guide rail TAIWAN DTX 30+20+20 Frame TAIWAN JT Reducer Germany Techmach Camera 3 pieces Servo motor BOCHU Proportional valve Felton Electronic components SCHNEIDER Triple air inlet Nitrogen, oxygen, air Lubrication system Automatic oil supply system Accessories 30 protective lenses, 30 nozzles, tool kit. Optional: Air compressor ARS-30HP-XF-1.6 MPa, dust collector 11.5 kW.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 6,000 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 500 8x4 Crane F705 R.2.7 L436 V20 NEW MODEL Removable flatbed with drop sides 4400x2500x600 mm Fifth wheel plate Volvo: New Model 2026!! * FH sleeper cab * Wheelbase 4600 mm * Exhaust emissions according to Euro 6 Stage E, with SCR, particulate filter, and EGR * 12.8 l diesel engine, 510 hp / 375 kW, 2,550 Nm * Volvo Engine Brake+ (VEB+), braking power 510 hp / 375 kW (D13K) * Complies with ADR brake regulations * I-Shift AT2612F, automated 12-speed transmission (direct drive), max. input torque: 2,652 Nm * Rear axle RSS1370A, single reduction, 13 t axle load, GVW 70 t * AA tires 315/70R22.5 * Drive axle ratio 2.85:1 * Diesel fuel tank * Driver comfort package * Air conditioning with automatic temperature control and sun sensor * Information & media package with navigation * Radio: AM/FM * 3 x USB ports * 8 speakers * High instruments: digital driver info display, 12" with 4 views * Second driver info display, 9" display * Navigation system: TOMTO * AGM batteries, 2 x 210 Ah * Battery indicator in the display (voltage, amperage, battery status with warning function) * Main switch on chassis * 330 L aluminum tank on right, D-shape, 710 mm high, 830 mm long * Fuel tank, standard ground clearance * AdBlue tank on left, usable capacity 64 liters * Lockable tank cap * Spill guard for tank filler neck * Exhaust to rear * 2 foldable wheel chocks, transport mounted * Rear and side marker lights * Towing crossmember with D-value = 190 kN for G-150/G-260 hole pattern * Towing crossmember to frame end 85 mm * Frame length rear 4395 mm, measured from drive axle/1st drive axle * Towing hitch Rockinger 400 G-150 (observe D-value / max. trailer load!) * Electrical connection for semi-trailer/trailer, 15-pin * Trailer/semi-trailer connection Duomatic * Trailer connections centrally positioned * Stationary trailer brake (active up to 7 km/h) * Rear underrun protection, aluminum, fixed, thin * 4x VA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle 2x NLA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, tag axle Guodpeywfxgsfx Anloc * Electric venting pump * Transmission/I-Shift operation via control unit on driver's seat * I-Shift driving modes: Standard, Performance, and Economy * Auto return to Economy mode * No manual intervention in automatic mode, no kickdown * Cruise control * Gearbox oil cooler, basic, water/oil * 2-cylinder air compressor, 1100 l/min, for vehicles/combinations with increased air requirement * Front air intake with standard air filter * Alternator 150A / 4200W * External noise per ECE R51.03 Phase 2, with low-noise certificate and L-plate * Closed crankcase ventilation * Dual fuel filter on engine, large, for poor fuel quality (e.g. Eastern Europe) * Fuel filter with water separator * PTO (mid-speed PTR-DM), gearbox-mounted, interface: 1 DIN rear for pump * NA at gearbox, max. output 600 Nm * Dynamic Package: seats in fabric (blue/dark blue) with interior in gray fabric Driver's seat comfort, air-sprung, heated, integrated seatbelt * Passenger seat standard, air-sprung * Lower foldable bunk, 2000x815/740/660 mm (middle, upper, lower) with safety net * Cab auxiliary heater, 2 kW * Storage under bunk * Refrigerator with 33 L freezer compartment under bunk * Vanity/shaving mirror * Cab insulation

Condition: new, maximum load weight: 30,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,300 mm, loading space width: 2,480 mm, loading space height: 2,303 mm, Year of construction: 2026, Equipment: ABS, Brand new D-Tec Flexliner Aluminium Tipper 57m³ with 3 Axles D-TEC Flexliner FL-3-S Aluminium * 3 axles * SAF axles * Disc brakes * Air suspension Gujdpfoy Nuqisx Anljc * Automatic lift axle * Wabco EBS * 57 m³ capacity * Aluminium load body * 7 mm wear-resistant aluminium floor * Internal dimensions approx. 10,300 x 2,480 x 2,303 mm * Tipping angle approx. 45–46° * Black sliding tarpaulin * Pneumatically locked combination rear door * 2 rear slides * LED lighting * LED work lamps * Toolbox * Load pressure gauge * Tyre pressure monitoring system (TPMS) * Broom/shovel holder * Access ladder * Steel rims * Tyres 385/65 R22.5 * Body colour: RAL 7001 silver grey * Frame RAL 7016 anthracite grey * Available at short notice * Errors and prior sale excepted We are always at your disposal for any questions.

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 6,000 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 500 8x4 Crane F705 R.2.7 L436 V20 NEW MODEL Removable flatbed with drop sides 4400x2500x600 Fifth wheel Volvo: New model 2026!! * FH sleeper cabin * Wheelbase 4600 mm * Emissions in accordance with Euro 6 Stage E, with SCR, particulate filter, and EGR * Diesel engine 12.8 l, 510 hp / 375 kW, 2,550 Nm * Volvo Engine Brake+ (VEB+), engine brake output 510 hp / 375 kW (D13K) * ADR brake regulations compliant * I-Shift AT2612F, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm * Rear axle RSS1370A, single reduction, 13 t axle load, GVW 70 t * AA tires 315/70R22.5 * Drive axle ratio 2.85 : 1 * Diesel fuel tank * Driver comfort package * Air conditioning with automatic temperature control and sun sensor * Info and media package with navigation * AM/FM radio reception * USB ports, 3x * 8 speakers * High Instruments: digital driver display, 12'' with 4 views * Second driver info display, 9" display * Navigation system "TOMTO" * AGM batteries, 2 x 210 Ah * Battery indicator on display (volts, amperes, and battery status with warning function) * Main switch on chassis * 330 L aluminum tank on the right, D-shape, 710 mm high, 830 mm long * Fuel tank, normal ground clearance * AdBlue tank left, usable capacity 64 liters * Lockable tank cap * Tank filler neck, anti-spill protection * Rear-facing exhaust * 2 foldable wheel chocks, transport mounted * Rear and side marker lights * Trailer crossmember with D-value = 190 kN for G-150/G-260 bolt pattern * Trailer crossmember to end of frame 85 mm * Rear frame length 4395 mm, measured from drive axle/first drive axle * Trailer coupling Rockinger 400 G-150 (observe D-value/max. trailer load!) * Electrical connection for semi-trailer/trailer, 15-pin * Trailer/semi-trailer connector Duomatic * Trailer connections in center * Stationary trailer brake (active up to 7 km/h) * Rear underrun protection, aluminum, fixed, slim * 4x VA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle 2x NLA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, tag axle * Electric vent pump * Gearbox/I-Shift control via operating unit on driver's seat * I-Shift driving modes: standard, performance and economy * Auto return to economy mode * No manual override in automatic mode, without kickdown Gsdpfx Aeywfxaonleuc * Cruise control (tempomat) * Gearbox oil cooler, basic, water/oil * 2-cylinder air compressor, 1100 l/min, for vehicles/combinations with increased air demand * Front air intake with standard air filter * Alternator 150A/4200W * External noise to ECE R51.03 phase 2, with low-noise certificate and L-label * Closed crankcase ventilation * Dual fuel filter on engine, large for poor fuel quality e.g. in Eastern Europe * Fuel filter with water separator * PTO (medium speed PTR-DM), gearbox side, connection: 1 DIN rear for pump * PTO on gearbox, max. output 600 Nm * Dynamic equipment: fabric seats, yl (blue/dark blue) with fabric interior in gray Driver comfort seat, air-suspended, heated, belt in seat * Passenger seat standard, air-suspended * Lower bed, foldable, 2000x815/740/660 mm (middle, top, bottom) with safety net * Cab auxiliary heater, 2 kW * Storage under bed * Refrigerator with freezer compartment 33 L under bed * Vanity/shaving mirror * Cab insulation

Condition: new, mileage: 500 km, power: 368 kW (500.34 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Volvo FH 500 8x4 Crane F705 R.2.7 L436 V20 NEW MODEL Removable flatbed with drop sides 4400x2500x600 mm + extension Fifth Wheel Coupling Volvo: * New Model * FH sleeper cab * Wheelbase: 4600 mm * Emission standard: Euro 6 Step E with SCR, particulate filter, and EGR * Diesel engine 12.8 l, 510 hp / 375 kW, 2,550 Nm * Volvo Engine Brake+ (VEB+), braking power 510 hp / 375 kW (D13K) * Complies with ADR brake regulations * I-Shift AT2612F, automated 12-speed gearbox (direct drive), max. input torque: 2,652 Nm * Rear axle RSS1370A, single reduction, 13 t axle load, GCW 70 t * AA tyres 315/70R22.5 * Drive axle ratio 2.85 : 1 * Diesel fuel tank * Driver comfort package * Air conditioning with automatic temperature regulation and sun sensor * Info and media package with navigation * Radio: AM/FM * 3x USB ports * 8 speakers * High-level instruments: 12'' digital driver's info display with 4 views * Second driver info display, 9'' display * Navigation system "TOMTO" * AGM batteries, 2 x 210 Ah * Battery status display (voltage, amperage and status with warning function) Guedpfeywfwijx Anloc * Main switch on chassis * 330 L aluminium tank right, D-form, 710 mm high, 830 mm long * Standard ground clearance fuel tank * AdBlue tank left, usable capacity 64 litres * Lockable tank cap * Spill guard tank filling nozzle * Exhaust at rear * 2 folding wheel chocks, transport mounted * Rear and side marker lights * Trailer cross member with D-value = 190 kN for G-150/G-260 hole pattern * Trailer cross member to frame end: 85 mm * Rear frame length: 4,395 mm, measured from drive axle/first drive axle * Trailer coupling Rockinger 400 G-150 (observe D-value/max trailer load!) * Electrical connection for semi-trailer/trailer, 15-pin * Trailer/semi-trailer Duomatic connection * Central trailer connections * Stationary trailer brake (active up to 7 km/h) * Rear underrun protection, aluminium, fixed, thin * 4x VA tyres 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle * 4x AA tyres 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle * 2x NLA tyres 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, tag axle * Electric venting pump * Gearbox/I-Shift control via driver seat console * I-Shift driving modes: Standard, Performance, and Economy * Automatic return to Economy mode * No manual override in automatic mode, no kickdown * Cruise control * Gearbox oil cooler, basic, water/oil * Two-cylinder air compressor, 1,100 l/min, for vehicles/combinations with high air demand * Forward air intake with standard air filter * Alternator 150A/4200W * External noise as per ECE R51.03 Phase 2, with low noise certificate and L-plate * Closed crankcase ventilation * Dual fuel filter system at engine, large for poor fuel quality (e.g. Eastern Europe) * Fuel filter with water separator * PTO (medium speed PTR-DM), gearbox side, connection: 1 DIN rear for pump * PTO on gearbox, max output 600 Nm * Dynamic equipment: seats in fabric (blue/dark blue) with grey fabric interior * Comfort driver’s seat: air-suspended, heated, seat-integrated belt * Standard co-driver seat, air-suspended * Lower bunk, foldable, 2000x815/740/660 mm (middle, top, bottom) with safety net * Cab parking heater, 2 kW * Storage under the bunk * Refrigerator with 33 L freezer compartment under the bunk * Vanity/shaving mirror * Cab...

Condition: used, maximum load weight: 23,480 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 04/2018, next inspection (TÜV): 02/2026, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Krone 2-axle curtainsider trailer with tail lift Side walls Spare wheel Rear portal doors Cut-resistant side curtains Sliding tarpaulins Front support Sliding DHollandia tail lift Guedpfx Aex St Acsnlec Krone axles Tyres 385/55 R 22.5 Further information available on request

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,350 mm, loading space height: 2,400 mm, loading space volume: 50 m³, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, KEMPF 3-Axle Tipper Semi-Trailer SKM 36/3 SR Membrane ? Steel Half-Pipe Body (50.4 m³) New Vehicle Availability: Expected February 2026 ----Technical Specifications Type: KEMPF SKM 36/3 SR Membrane * Design: 3-axle tipper semi-trailer with steel half-pipe body * Permissible total weight: 36,000 kg * Axle load: 3 x 8,000 kg * Fifth wheel load: approx. 12,000 kg * Loading length: approx. 9,500 mm * Loading width: approx. 2,350 mm * Body height: approx. 2,400 mm * Body volume: approx. 50.4 m³ * Total height: approx. 3,830 mm to the top edge (loaded) * Nominal coupling height: approx. 1,200 mm (technically 1,200–1,260 mm) ----Superstructure / Body Steel half-pipe body in durable off-road design * Material: highly wear-resistant HARDOX steel (HB 450 / HB 500) * Floor: continuous 5 mm HARDOX steel, reinforced * Side walls: 4 mm HARDOX steel * Front wall: 20° inclined, 4 mm HARDOX steel * Rear wall: double-leaf (1/3 left, 2/3 right), grain-tight, with pneumatic 2-hook locking system and integrated slide (400 x 400 mm) * Cover plate: removable, protects slider from dirt and damage * Air vibrator: rear left, operated by switch * Catwalk with ladder and guardrail according to accident prevention regulations (UVV) * Internal access via step system in the front wall * Shovel and broom holder on the front wall ----Chassis and Superstructure KEMPF welded construction made of fine-grained steel, sandblasted and hot-dip galvanized * Off-road version, conically tapered * Chassis color: Deep Black (RAL 9005) * Body color: White Aluminium (RAL 9006) * Tarp color: Silver (Mehler 911) * Attachments: hot-dip galvanized and black powder-coated * Robust and high-quality overall construction ----Axles, Tyres, and Suspension SAF INTRADISC plus Integral off-road axles with disc brakes (Ø 430 mm) * Axle with automatic lift axle and forced lowering * Tyres: 385/65 R 22.5 (brand according to Kempf's choice) * Rims: Alcoa Ultra ONE aluminum rims, Dura-Bright EVO * Air suspension system with lift/lower function and quick release * Load gauge with scale display at the front left * Chassis laser-aligned (optimized tire wear and fuel consumption) ----Hydraulics and Tipping System HYVA front tipping cylinder, single-circuit hydraulic system (190–250 bar) * Edbro 1" closure coupling, high mounted * Hard-chromed piston, robust design ----Brake and Safety Systems Knorr EBS with RSP (Roll Stability Program) * ABS with 4-channel configuration (4S/2M) and brake light connection * Tire pressure monitoring system in accordance with ECE R141 * Trailer Info Module TIM G2 with brake wear indicator and diagnostic data * Acoustic reverse warning system * Folding underrun protection to ECE R58.03 with spring-assisted lifting Gujdpfx Ansxn Ebmoljc ----Lighting and Electrics Complete LED lighting to EC standard, ADR compliant * LED triple chamber lights with chrome rings * LED side markers with indicator function * LED cargo space lighting, operated by switch * LED reversing lights (2 additional side-mounted) * LED rear fog light and license plate lighting * Brake light * 15-pin socket ----Accessories and Extras Two PVC toolboxes (approx. 660 x 500 x 460 mm each) * Removable aluminum ladder (4 m) with holder * Two plastic wheel chocks * Double-sided side underrun protection in accordance with EC regulation * Folding A-plate at the rear of the chassis * Large reflective panel (200 x 1,130 mm) * Mud flaps with spray suppressor * Two aluminum landing legs (load capacity 24 t) ----Tarpaulin and Frame Rol

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, loading space length: 6,000 mm, loading space width: 2,480 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Volvo FH 500 8x4 Crane F705 R.2.7 L436 V20 NEW MODEL detachable platform with drop sides 4400x2500x600 Fifth wheel coupling Volvo: New model 2026!! * FH sleeper cab * Wheelbase 4600 mm * Emissions per Euro 6 Step E with SCR, particulate filter, and EGR * 12.8 L diesel engine, 510 HP/375 kW, 2,550 Nm * Volvo Engine Brake+ (VEB+) engine brake. Braking power 510 HP/375 kW (D13K) * Complies with ADR brake regulations * I-Shift AT2612F automated 12-speed gearbox (direct-drive), max. input torque: 2,652 Nm * Rear axle RSS1370A, single reduction, 13 t axle load, GCW 70 t * AA tires 315/70R22.5 * Drive axle ratio 2.85 : 1 * Diesel fuel tank * Driver comfort package * Air conditioning with automatic temperature control and sun sensor * Info and media package with navigation * Radio reception: AM/FM * 3x USB ports * 8 speakers * High instruments: digital driver's info display, 12'' with 4 views * Second driver's info display, 9'' bdisplay * Navigation system "TOMTO" * AGM batteries, 2 x 210 Ah * Battery status display (voltage, amperage, battery status incl. warning) * Main electrical switch on chassis * 330 L aluminum tank right, D-shape, 710 mm high, 830 mm long * Fuel tank, standard ground clearance * AdBlue tank left, usable volume 64 liters * Lockable fuel cap * Spillover protection on tank filler * Exhaust rear discharge * 2 folding wheel chocks, transport mounted * Rear and side marker lights * Trailer cross member with D-value = 190 kN for G-150/G-260 hole pattern * Trailer cross member to end of frame 85 mm * Frame length rear 4395 mm, measured from drive axle/first drive axle * Trailer coupling Rockinger 400 G-150 (D-value/max. trailer weight must be observed!) * 15-pin electrical connection for semi-trailer/trailer * Trailer/semi-trailer Duomatic connection * Trailer connections centered * Stationary trailer brake (active up to 7 km/h) * Rear underride protection, fixed, thin aluminum * 4x VA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steer axle Guedpfxjywfvxo Anlec 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle 2x NLA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, tag axle * Electric air release pump * Gearbox/I-Shift control via driver's seat control panel * I-Shift drive mode: Standard, Performance, and Economy * Auto return to Economy mode * No manual interventions in automatic mode, without kickdown * Cruise control * Transmission oil cooler, basic, water/oil * Air compressor 2-cyl., 1100 l/min., for vehicles/combinations with high air demand * Air intake front with standard air filter * Alternator 150A/4200W * Exterior noise per ECE R51.03 phase 2, with noise reduction certificate and L-plate * Closed crankcase ventilation * Dual fuel filters on engine, large size for poor fuel quality (e.g. Eastern Europe) * Fuel filter with water separator * PTO (medium speed PTR-DM) gearbox-mounted, 1 DIN rear connection for pump * PTO on gearbox, max. output 600 Nm * Dynamic trim: seats in fabric, yl (blue/dark blue) with interior in grey fabric Comfort driver seat, air-suspended, heated, seatbelt integrated * Standard passenger seat, air-suspended * Lower folding bunk, 2000x815/740/660 mm (middle, top, bottom) with safety net * Cab heater, 2 kW * Storage below the bunk * Refrigerator with 33 L freezer under bunk * Make-up/shaving mirror * Cab insulation

Condition: new, mileage: 500 km, power: 368 kW (500.34 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Volvo FH 500 8x4 Crane F710 RA2.27 with Jib and Winch – Tractor Unit, Immediately Available Removable drop-side platform body 4400x2500x600 mm + extension Fifth wheel coupling Volvo: New model * FH sleeper cab * Wheelbase: 4600 mm * Emissions: Euro 6 Step E, with SCR, particulate filter, and EGR * Diesel engine 12.8 l, 510 hp/375 kW, 2,550 Nm * Volvo Engine Brake+ (VEB+), braking power: 510 hp/375 kW (D13K) * Compliant with ADR braking regulations * I-Shift AT2612F, automated 12-speed transmission (direct drive), max. input torque: 2,652 Nm * Rear axle RSS1370A, single reduction, 13 t axle load, GCW 70 t * AA tires 315/70R22.5 Guedpfx Anjywfwvjlec * Drive axle ratio 2.85:1 * Diesel fuel tank * Driver comfort package * Air conditioning with automatic climate control and sun sensor * Info and media package with navigation * Radio: AM/FM * 3x USB ports * 8 speakers * High instrument cluster: 12'' digital driver display with 4 views * Second driver’s info display, 9'' b-display * Navigation system: TOMTOM * AGM batteries, 2 x 210 Ah * Battery status display (voltage, amperage, and condition with warning function) * Main switch on chassis * 330 L aluminum fuel tank on right, D-shape, 710 mm high, 830 mm long * Fuel tank, standard ground clearance * AdBlue tank on left, usable capacity 64 L * Lockable fuel cap * Splash protection on tank filler neck * Exhaust outlet to rear * 2 foldable wheel chocks, transport mounted * Marker lights rear and side * Trailer crossmember with D-value = 190 kN for G-150/G-260 mounting pattern * Trailer crossmember to frame end: 85 mm * Rear frame length: 4395 mm, measured from drive axle/first drive axle * Rockinger 400 G-150 trailer coupling (observe D-value/max. trailer weight!) * Electrical trailer/semi-trailer connection, 15-pin * Trailer/semi-trailer Duomatic connection * Trailer connections in the center * Stationary trailer brake (active up to 7 km/h) * Rear underrun protection, aluminum, fixed, thin * 4x VA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, steering axle * 4x AA tires 315/70R22.5 Continental, Hybrid HD3, rolling resistance class: C, drive axle * 2x NLA tires 385/55R22.5 Continental, Hybrid HS3+, rolling resistance class: C, trailing axle * Electric venting pump * Transmission/I-Shift control via unit on driver’s seat * I-Shift driving modes: Standard, Performance, and Economy * Auto-return to Economy mode * No manual intervention in automatic mode, no kickdown * Cruise control * Transmission oil cooler, basic, water/oil * 2-cylinder air compressor, 1100 l/min, for vehicles/combinations with increased air consumption * Front air intake with standard air filter * Alternator: 150A/4200W * External noise level per ECE R51.03 Phase 2, with low noise certificate and L sign * Closed crankcase ventilation * Dual fuel filters on engine, large size for poor fuel quality (e.g., Eastern Europe) * Fuel filter with water separator * PTO (medium speed PTR-DM), gearbox side, connection: 1x rear DIN for pump * PTO on gearbox, max. power: 600 Nm * Dynamic trim: fabric seats, yl (blue/dark blue), interior trim in grey fabric * Comfort driver’s seat: air-suspended, heated, seatbelt integrated * Standard air-suspended passenger seat * Lower bunk, folding, 2000x815/740/660 mm (center, top, bottom) with safety net * Cab parking heater, 2 kW * Storage under bunk * 33 L fridge with freezer compartment under bunk * S

Condition: new, Year of construction: 2024, empty load weight: 178 kg, Dreipunktstreuer D301 0.3m³ Description: Spreader with three-point linkage (CAT 1) and a single spreading material chamber. The spreading material is conveyed via an auger and distributed by the patented spreading disc unit. Hydraulically driven motors, controlled by Kugelmann hydraulic block. All drives can also be operated manually in the event of control failure. Chain drive ensures high torque when starting the auger. Corrosion-resistant material combination: stainless steel subframe (VA) and plastic spreading material hopper. Support legs can be folded up towards the spreader during operation. Features: - Hydraulically driven single-chamber spreader with auger and spreading disc - Corrosion-resistant combination of stainless steel subframe and plastic hopper - Dimensions (WxDxH): 1080 x 590 x 1200 mm - Unladen weight: 178 kg - Includes apron/splash guard - Includes tarpaulin cover - Includes road lighting (compliant with StVZO) - RAL 2011 signal color - Manual emergency operation - Foldable support legs - Low energy consumption - Operable from an oil flow rate of 15 l/min - Patented spreading disc unit - Manual adjustment of spreading pattern - Winter service marked with reflective white warning film - Can be operated without control unit (via control cabinet key on easily accessible side) - Mounting for CAT 1 Standard Equipment: - Hydraulic drive for auger and spreading disc - Stainless steel (VA) subframe with RAL 2011 signal paint - Stainless steel spreading disc - Plastic spreading hopper - Plastic spreading disc guard - Mesh tarpaulin cover - Apron - LED lighting in accordance with StVZO - Foldable support legs (remain on device during use) - Manual adjustment of spreading pattern - Winter service marking - Operation possible without control unit - All drives are regulated and equipped with manual emergency operation - Hydraulic hoses with SVK couplings for forward and return - Spreader is fully storable (can be set down) Carrier Vehicle Requirements: - min. 20 L/min at reduced spreading output - max. 50 L/min with external oil cooler - Kugelmann system internally rated at 230 bar - Carrier vehicle with mounted spreader must not exceed permissible axle load or gross vehicle weight Optional Equipment: - k-basic 2 control unit - Wiring harness (flying) - Microprocessor control with CAN-BUS technology - Closed loop control of all drives (with feedback) - Functions: > Adjust spreading width > Adjust spreading density > Rotating beacon on/off > Work light on/off > Spreader operating/pause > Illuminated keys and rotary controls > Data recording > Speed simulation Guedpfx Ajx S Tpvenloc > x2 key for travel-dependent spreading (compatible with k-basic 2) - Option: Travel-dependent spreading incl. start/stop function – driving signal required - LED work light 12V Storage location: not specified

Condition: used, Year of construction: 2016, operating hours: 3,597 h, mileage: 66,228 km, fuel type: diesel, empty load weight: 18,000 kg, Operating hours: 3597, First registration: 23.06.2016, self-propelled _____ Standard basic equipment: Fan unit - fan drive hydraulically operated via a gearbox-independent PTO located on the chassis (semi-hydrostatic drive) – Hydraulic fan drive – Hydraulic oil tank 50 l – Engine compartment finished with sound-absorbing material – Fan exhaust guided upward through the front superstructure of the hopper – Hydraulic pump, single for sweepings hopper – Sweepings hopper (with tailgate and sieve) and water tank made of 1.4003 stainless steel – Engine compartment paneling, standard steel – Gross hopper volume 6.5 m³ – Hopper floor made of alloyed stainless steel, 1.4301 – Hopper tipping angle approx. 55 degrees – Dirt chute made of stainless steel, 1.4003 – Inspection hatches right and left – Dirty water drain 4", A-coupling – Air guide sieve, manually foldable – 2 amber rotating beacons at rear of hopper – Pneumatically actuated air shut-off valve on suction hose – Multi-stage safety support, pneumatically operated – Marker lights at rear of hopper, side marker lights – Integrated water tank – Provision for rear suction hose boom or roof-mounted – Side marker lights. Sweeping intake – Intake, wear-resistant coated – Coarse pickup by tilting the suction nozzle – Suction hose diameter 250 mm – Disc brush, pushed – Disc brushes, hydraulically driven, steel – Disc brushes, steel, diameter 500 mm, pulled – Infinitely variable speed regulation for disc brushes – Two robust swiveling trailing wheels – Automatic raising of sweeping units when reversing – Working lights for sweeping assembly. Roller brush – Roller brush mounting, pulled – Brush length 1,300 mm, brush diameter 406 mm with synthetic bristles (chassis-dependent) – Hydraulically driven roller brush – Throw limit skirt for roller brush assembly. Guodpfjfy Am Uex Anlec Water system – Water tank capacity approx. 1,554 l – Water tank made of 1.4003 stainless steel, coated – Water level indicator in cab – Water filling device, Storz C (2"), right – Manual water filling device, right and left – Water pump, hydraulically driven – Automatic water stop when lifting the sweeping units – Spray water connection, 3/4", rear right – Water blow-out system – Electric water valves in the cab – Dual nozzle bar, low pressure front. Instrument cluster and control panel – Bucher instrument cluster, incl. 7" color display – Ergonomic control unit mounted on driver’s door, equipped with main functions – Display includes the following features: water level indicator, operating hours, and rear axle load – Warning and indicator lights for rear axle load – Control and regulation unit for adjusting brush pressure (brush relief), stepless speed regulation of disc brushes – Electric valves for water system, operated from the cab – Operation of debris hopper functions via cable remote control from cab, also operable from outside – Operation of air guide sieve, controlled at rear right of vehicle – Overload indicator for rear axle load, warning light in display (option).

Condition: used, Year of construction: 2019, operating hours: 3,394 h, empty load weight: 4,000 kg, Operating hours: 3,394, First registration: 16/09/2019 Driving speed: 40 km/h - 4,000 kg gross vehicle weight Cab: Sound-insulated, low-vibration cab with entry on right or left, right-hand drive, air-suspended driver's seat, passenger seat, rotating beacon, reverse warning buzzer, engine RPM gauge, heater with 2-speed fan, heated windshield with 2-speed intermittent wiper system, radio/SD, work lights, seat belts for driver and passenger. Floor panels with metal grating, CAN View System with 7" color display showing all relevant data with integrated self-diagnosis system. Engine: VM engine D754 E6 (60D/14), 2,970 cm³, 4 cylinder, 62 kW @ 2,300 rpm, 270 Nm @ 1,350 rpm, Common Rail. Exhaust system: DPF & DOC with SCR urea system, AdBlue tank 15 l Suspension: Fully suspended with coil springs and shock absorbers front and rear. Tires: front 6.50 R10 / rear 225/75 R10 Brakes: Hydraulic dual-circuit brake plus hydrostatic rear brake, hydraulically operated parking brake. Sweeper container: Container made of DIN 1.4003 stainless steel, tipping height 1.50 m, tipping angle 45°. High-performance blower with a wear-resistant, self-cleaning impeller. Discharge chute on the container 200 mm. Brush: 850 mm front brush (poly) with hydraulic drive, adjustable up to 120 rpm, 1,440 mm sweeping width per side, brush contact pressure and lateral swing angle independently adjustable via joystick, front and side collision protection. Suction duct: Continuously adjustable lifting and lowering suction duct on rigid wheels. Water tank: Fresh water tank with 152 l and water recovery tank with 250 l. Paint: Cab, side and rear covers, single-color white; chassis, fresh water tanks and container in grey. Toolkit includes grease gun, combination wrench, screwdriver set. Special equipment: - Right-hand drive (standard) - All-wheel steering - Wall-to-wall turning circle 4,600 mm - Air-conditioning with automatic climate control - Deluxe driver’s seat, heated with lumbar support - Upgraded radio with Bluetooth - Hands-free phone kit - Blind spot mirror Guedpfx Aetuzqpjnljc - Heated left/right rearview mirrors - Rear-view camera system with integrated color monitor - Automatic central lubrication system (Interlube) - Folding LED rotating beacon (instead of standard) - Airport rotating beacon, strobe lights (CAA specifications CAP 168) - Optional mounting for 3rd brush available - Mounting plate & high-level work lights oriented to the right Location: 54595 Prüm