Used Espe Chip 50 for sale (38,393)

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Pgodpfx Ajy Hkd Hsdlek Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 2007, operating hours: 13,800 h, lifting height: 4,430 mm, fuel type: diesel, mast type: duplex, fork length: 1,000 mm, fork width: 1,140 mm, total height: 3,010 mm, total length: 3,050 mm, total width: 1,190 mm, color: other, Empty weight: 6.815 kg Lifting capacity: 5.000 kg - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: H2X394U03600 - Operating hours: 13800 - Lifting capacity: 5000kg - Lifting height: 4430mm - Overhead clearance: 3000mm Pgedoy Exnwopfx Adljk - Free lift: 0mm - Fork length: 1000mm - Maximum fork width: 1140mm - Minimum fork width: 260mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights, Half cabin, Joystick - Mast: Duplex - Drive: Diesel - Motor brand: Linde ? - Transport dimensions: 3050mm x 1190mm x 3010mm (l x w x h) - Transport weight [kg]: 6815kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Deckel Maho Machining Center 5-Axis Simultaneous Machining Model DMU 50 Evo Linear Year 2005 Pedpfoy Hqviox Adlogk CNC Heidenhain iTNC 530

Condition: used, Year of construction: 1996, pressure 0050 t chamfer lenght 1270 mm distance between columns 1040 mm stroke 215 mm throat 410 mm dayligth 385 mm back stop - adjustable 860 mm working feed 1 - 10 mm/sec return speed 135 mm/sec total power requirement 8,6 kVA weight of the machine ca. 4750 kg dimensions of the machine ca. 2000 x 2100 x 2400 mm - controlled axes: Y1, Y2, X, R - Pneumatic die shift Pgjdpjy Hxmisfx Adljk - hydraulic WILA/TRUMPF upper tool clamp - hydraulic WILA/TRUMPF lower tool clamp - LAN network connection - 4 stop fingers manually adjustable, foldable to the rear, pneumatic clampable - CNC control, operation on the front left - 2-hand operation / foot switch - rear + side protection

Condition: repair required (used), grinding diameter: 1,295 mm, grinding length: 4,276 mm, Manufacturer: Farrel Type: 50x14 CNC Control: NUM 760 Year of construction: 1970 Looking for a high-precision cylindrical grinder for large workpieces? We have a Farrel 50 x 14 CNC Cylindrical Grinder available! This machine is ideal for industries requiring precise concave and convex grinding, ensuring superior accuracy and efficiency. Key Features: Concave grinding possible Covex grinding possible Pgodpfx Aov Dia Aedljk NUM 760 CNC Control Fixed steady rest 2 x Stones and Flanches included Specifications Metric US Standard Center height 647 mm Grinding diameter Ø 1295 mm Grinding length 4267 mm Grinding stone dimensions 914 x 152 mm mm Grinding stone speed 400 - 1200 Rpm Coolant system Yes Dimensions (estimate) Length 8500 mm Width 4500 mm Height 3200 mm Weight 78000 kg Please note: The information on this page is believed to be correct and, where possible, obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, they will not constitute a representation and contractual terms. We recommend that you review all important details.

Condition: like new (used), Year of construction: 2010, operating hours: 32,498 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece width (max.): 500 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, overall weight: 5,900 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 35,000 W, Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Pedpfeyi Dniox Adlsgk Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer RENISHAW Measuring probe Automatic door Machine running times Under power: 54257 Spindle Working: 32498 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: good (used), Year of construction: 2007, operating hours: 443 h, color: blue, Mast: articulated arm Working height: 5.000 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Max. horizontal reach: 2000 m Production country: DE Please contact Vink Machinery for more information Teupen Leo 50 GT * 2007 Podor Hn H Depfx Adlogk * Diesel and 380 volts * 443 working hours!! * 50 meters working height * 20 meters horizontal range * 200 kg lifting capacity * Adjustable tracks * Remote control * Stamp machine * 13510 kg own weight * Including manual

Condition: good (used), Year of construction: 2018, operating hours: 6,478 h, load capacity: 5,000 kg, lifting height: 3,880 mm, fuel type: electric, mast type: duplex, construction height: 2,850 mm, empty load weight: 7,500 kg, mileage: 6,478 km, Electric triplex forklift Brand: Still (Germany) Year: 2018 Capacity: 5,000 kg Lift height: 3,880 mm Overall height: 2,850 mm Equipped with sideshift Equipped with fork positioner (up to 135 cm) 6,478 operating hours Fork length: 2,200 mm 2018 battery with external charger Pgjdpfx Adjy D Upbslek

Condition: good (used), Chip conveyor, chip conveyor belt, coolant cleaning, chip disposal, scraper conveyor, scraper conveyor belt, chip chain conveyor, hinge belt conveyor, scraper belt conveyor -Manufacturer: COMAR, chip conveyor comes from a MIKRON VC 500D -Type: VC 500D -Conveyor belt width: 230 mm -Outlet height: 1100 mm -Drive: 0.15 kW / 14 rpm (2.40 m/min) Psdpey Ezacjfx Adlsgk -Individual components: see photos -Dimensions: 720/2630/H1575 mm -Weight: 727 kg

Condition: excellent (used), Year of construction: 2020, Steady rest for WEILER E40 and E50 lathe In very good condition. Price for E40 steady rest: €2,500 Price for E50 steady rest: €2,850 Clamping range: 10 – 150 mm. Pjdpfjtx Avkox Adlegk

Condition: new, pressure 50.0 t stroke 200 mm table surface area 730 x 205 mm Podpfx Adsxaa Ixelsgk dayligth 75 - 1050 mm column travel between the guideways 730 mm weight of the machine ca. 292 kg range L-W-H 1040 x 800 x 1880 mm Description : - Standard with cable winch - for easy height adjustment of the support table - Piston delivery either manually or pneumatically - Powerful workshop presses for craft and repair businesses - Optimum price-performance ratio thanks to rational design - The standard foot pedal keeps your hands free for the workpiece - Increased range of application thanks to the optionally . available pressure mandrel set (10 pieces). - Pressure cylinder with integrated return spring for piston return - Welded steel frame for heavy use and high stability - Versatile in use thanks to the pressure cylinder that can . be moved to the left and right

Condition: good (used), Air cooler, evaporator, cold room, industrial cooler, cooling unit, cooler, water cooler, cooling system, refrigeration, cold storage, refrigerated container, cold room, heat exchanger, jet stream, cooling fan Pedpfx Adorxgwbolsgk -Manufacturer: Port-A-Cool, mobile cooling fan type PAC2K36HP220-50 -Fan: Diameter: 36" / 914 mm Speed adjustable -Operating pressure: max. 3.45 bar -Voltage: 230V 50Hz / 5.5A -Dimensions: 1575/820/H1590 mm -Weight: 112 kg with pallet

Condition: used, grinding length / mm grinding width / mm workpiece height / mm Schanbacher S 3 50 Saw Blade Sharpening Machine – working condition – industrial unit For sale is a high-quality circular saw blade sharpening machine manufactured by Willy Schanbacher KG (Germany). The machine is ideal for precise sharpening of circular saw blades used in metal and woodworking industries. Technical details: Manufacturer: Willy Schanbacher KG (Esslingen, Germany) Type: S 3 50 Pgjdpoy E Tyusfx Adlok Serial number: 93 2187 Machine type: Saw blade sharpening machine Condition: Working condition Used, with normal signs of wear Last used without issues Features: Adjustable grinding angles (e.g. 90°, 120°, 140°) Precision grinding unit Feed mechanism for consistent sharpening Safety guard included Heavy-duty industrial design Applications: Metalworking Woodworking Workshops and sharpening services Scope of delivery: Machine as shown ?? Inspection possible by appointment ?? Shipping via freight forwarding available

Condition: used, Item: D-5730-Dickow Pump Wilhelm Dickow, Type NCL 50/165 Centrifugal pump / explosion-proof centrifugal pump with shaft seal Pgjdpsiiyrksfx Adlsk 7,5 kW, 2890 r/min

Condition: used, Year of construction: 2018, operating hours: 3,315 h, lifting height: 3,180 mm, fuel type: electric, mast type: duplex, fork length: 1,210 mm, fork width: 1,140 mm, total height: 2,350 mm, total length: 2,890 mm, total width: 1,390 mm, color: other, Empty weight: 7.114 kg Lifting capacity: 5.000 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516329J00544 - Operating hours: 3315 - Lifting capacity: 5000kg - Lifting height: 3180mm - Overhead clearance: 2400mm - Free lift: 0mm - Fork length: 1210mm - Maximum fork width: 1140mm - Minimum fork width: 310mm - Number of wheels: 4 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Half cabin, Work lights - Mast: Duplex - Drive: Electric - Brand/Type: 6 PZM 930 Pgjdpfx Ajy Dtkwodljk - Battery year of construction: 2018 - Capacity: 930Ah - Battery voltage: 80V - Transport dimensions: 2896mm x 1399mm x 2350mm (l x w x h) - Transport weight [kg]: 7114kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: good (used), Gear cutters, module cutters, hob cutters, tooth form cutters, module milling heads, end mill cutters, roller cutters, milling cutters, hob cutters, splined shaft hob cutters, gear hob cutters, slotted hob cutters, rack cutters Pjdjy D Ntzopfx Adlsgk -Manufacturer: Reishauer, hob cutters, 3 pieces -Type: Ø 50 mm / Ø 55 mm / Ø 62 mm -Hole: Ø 27 mm -Price/Fee: complete -Transport dimensions: 115/65/H70 mm -Weight: 1.3 kg

Condition: good (used), Mechatronic drive system, gearbox, spur gear gearbox, bevel gearbox, worm gearbox, Movegear Pedsy D I Hyepfx Adljgk -Gearbox: Angle gearbox -Translation: 31 : 1 -Shaft: Ø 20 x 50 mm / Ø 30 x 25 mm -Dimensions: 280/270/H210 mm -Weight: 24.5 kg

Condition: used, diameter div. number 16x tool adaptor SK 50 Tool Package DS Pgsdpfx Adowtrztsljk SK 50 Other quantities also possible! A total of approx. 600x SK 50 holder available

Condition: used, We are offering used crossbeams for sale. TECHNICAL DATA Clear span: 3,600 mm Box section: 125 x 50 mm – Load capacity per pair of beams: 3,700 kg Box section: 130 x 50 mm – Load capacity per pair of beams: 3,800 kg Colour: Narcissus yellow Condition: Used PRICING €25.00 net per unit Pgjdjy H D Ekopfx Adlok €29.75 gross per unit TIERED PRICING per unit – Stock: 2,000 units 1 – 50 units: €25.00 net 51 – 100 units: €24.00 net 101 – 250 units: €23.00 net From 251 units: €22.00 net PROJECT PLANNING Our sales team will be happy to provide you with a non-binding, tailor-made quotation. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. Prices are per unit/net price unless otherwise specified in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, deals in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage systems as well as machinery for trade, industry, and craft businesses. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. Please feel free to contact us if you have any questions. Four wins – The building blocks of DLK’s success: Warehouse Technology | Levelmaker® | Logistics | Solutions.

Condition: used, We are offering used cross beams for sale. TECHNICAL SPECIFICATIONS Clear span: 2,700 mm Pedpey H D Dmjfx Adlogk Box profile: 110 x 50 mm Colour: Daffodil yellow Load capacity per beam pair: 2,650 kg Condition: used PRICING €19.00 net per piece €22.61 gross per piece TIERED PRICING per piece – Stock: 200 pieces 1 - 30 pieces: €19.00 net 31 - 60 pieces: €18.24 net 61 - 120 pieces: €17.48 net from 121 pieces: €16.72 net PROJECT PLANNING Our sales team will be happy to provide you with a non-binding and customised offer to suit your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the event of an order. The price is quoted per piece/net price as specified in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products for warehouse logistics, conveyor technology, warehouse platforms, textile storage, and machines for trade, industry, and crafts. We continuously offer interesting used equipment from various manufacturers and brands at attractive terms. If you have questions, please do not hesitate to contact us. Connect Four – The four success factors from DLK: Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, We are offering used cross beams for sale. TECHNICAL DATA Clear span: 2,700 mm Box profile: 120 x 50 mm Colour: Narcissus yellow Load capacity per pair of beams: 2,900 kg Condition: used PRICING €20.00 net per piece €23.80 gross per piece TIERED PRICING per unit – Stock: 350 units 1 – 20 units: €20.00 net 21 – 60 units: €19.20 net 61 – 120 units: €18.40 net from 121 units: €17.60 net PROJECT PLANNING Pedey H D Dgjpfx Adlogk Our sales team will be happy to provide you with a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transportation and assembly of the goods. TERMS OF PAYMENT Payment terms are to be agreed upon in case of an order. The indicated price refers to a unit/net price or as specified in the description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, deals in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage systems as well as machinery for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. Please feel free to contact us with any questions. Four wins – The success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: used, We are offering used cross beams for sale. TECHNICAL DATA Clear span: 2,700 mm Box profile: 125 x 50 mm Color: Daffodil Yellow Load capacity per pair of beams: 2,650 kg Condition: used PRICE €19.00 net per piece €22.61 gross per piece TIERED PRICING per piece – Stock quantity: 120 pieces 1 - 30 pieces: €19.00 net 31 - 60 pieces: €18.24 net From 61 pieces: €17.48 net From 121 pieces: €17.60 net PROJECT PLANNING Our sales team will be happy to provide you with a non-binding offer tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. PAYMENT TERMS Payment terms are to be agreed in the event of an order. The indicated price is per item/net price, as specified in the description (plus VAT). You will, of course, receive an invoice with VAT shown separately. Psdpfxsy H D Aie Adlsgk ABOUT US DLK, based in Nordhorn, deals in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for commerce, industry, and trades. We continuously offer interesting used equipment from various manufacturers/brands at attractive terms. Should you have any questions, please feel free to contact us. Four wins – The key success factors of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: good (used), Year of construction: 2018, operating hours: 3,595 h, load capacity: 5,000 kg, lifting height: 5,980 mm, fuel type: electric, mast type: triplex, construction height: 2,800 mm, empty load weight: 7,500 kg, mileage: 3,595 km, Electric triplex forklift Brand: Still (Germany) Year of manufacture: 2018 Pgsdpfx Asy A Eu Sjdlsk Capacity: 5,000 kg Lifting height: 5,980 mm Overall height: 2,800 mm Equipped with: - Sideshift - Fourth hydraulic function - Only 3,595 operating hours - Non-marking tyres - 2018 battery - Automatic fill system - External charger Watch the video on YouTube

Condition: like new (used), Year of construction: 2025, operating hours: 150 h, functionality: fully functional, 5-Axis Machining Center Hedelius Acura 50 Control: Heidenhain TNC 7 Year of manufacture: 2025 Spindle hours: approx. 150h Internal machine No. 54 Travel distances: X-axis: 500 mm Y-axis (H / V): 550 / 370 mm Z-axis: 550 mm Swivel range: +30° to -115° Rotary table: Ø 500 x 430 mm Taper: SK 40 DIN 69871 Tool magazine: 55 positions Spindle speed: 50 - 14,000 rpm Drive power: 22 kW Equipment: - KinematicOpt - 3D Formingstar package - Sieve filter coolant system 500l - ICS 25 bar - Pressure booster pump from 25 to 50 bar - Scraper belt conveyor - Blow-off gun - Rinsing gun Pgsdpfx Adey Dc Dtjlok - Electronic handwheel HR 510 FS - Infrared receiver M&H - 3D infrared probe M&H 25.50 - Laser control system Blum LC50 260 - LTA extraction

Condition: ready for operation (used), This SSI Schäfer R3000 shelf rack starter bay with additional dividers is a particularly robust and proven storage solution for professional use in warehouses, workshops, businesses, archives, and hand storage areas. The high-quality, galvanized boltless shelving is perfectly suited for the clear and secure storage of boxes, small parts, containers, and other stored goods. With a shelf load capacity of up to 150 kg per shelf and a flexible 5 cm pitch, this immediately available shelving system provides a powerful and versatile solution for various storage requirements. This version additionally includes 20 used dividers for SSI Schäfer R3000 shelving racks. This listing serves as a reference for available versions with extra shelf dividers – if interested or if you have any questions, please contact us directly. PRODUCT DETAILS: - Height: approx. 249 cm - Depth: approx. 50 cm - Length: approx. 130 cm - Shelf load: 150 kg per shelf - Shelves: approx. 128.5 x 50 cm - Colour / finish: galvanized - Upright: approx. 249 x 50 cm, pre-assembled - Shelf pitch: 5 cm - Design: boltless system for quick assembly Psdpoy Hifvofx Adlogk - Availability: from stock Wietmarschen - Condition: used uprights and shelves - Manufacturer: SSI Schäfer R3000 - Accessories: 20 x divider / compartment separator - Divider model: TRF4517 - Divider dimensions: approx. 17.5 cm high / total height approx. 20.5 cm / width approx. 46.5 cm - Divider condition: used, galvanized - Other quantities available! ---- MULTIPLE UNITS AVAILABLE FOR IMMEDIATE DELIVERY ---- DELIVERY CONTENTS: - 02 x frame (approx. 249 x 50 cm), pre-assembled - 06 x shelf (approx. 128.5 x 50 cm) - 01 x cross bracing for stability - 20 x divider / compartment separator SSI Schäfer R3000 (TRF4517) PRICE: €190.00 net €226.10 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Germany-wide delivery through our partner freight forwarder – shipping costs depend on postcode - Professional assembly and disassembly by trained teams optionally available. - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will gladly provide you with a non-binding offer – individually tailored to your requirements. Whether new construction, modification or extension – we offer you expert advice for your rack configuration. SHOWROOM: We invite you to visit our showroom! On site you can get a comprehensive impression of our pallet racking, storage shelving, and other solutions. Many systems are assembled and can be experienced directly. Our expert advisors are at your disposal for questions and individual consultation – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers & variations of our products! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone call. Our telephone number is listed on our company page. ☎️ You can reach us by phone Monday to Friday, 08:00 – 16:00. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.