Used Ethernet Switch for sale (6,609)

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Iedpfxsg Iihwe Am Doih Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Year of construction: 1996, condition: excellent (used), Medium voltage panels metal clad air insulation - Un=6kV 1250A 40kA manufactured by ABB, r.v. 1996, type SR7 / 2, components VD4 of ABB circuit breaker, SPAJ protections, SPAU ABB, control voltage 220VDC, fully functional, very good condition. 2 x incomer with voltage measurement, 2 x panel voltage measurement , 6 x outlet panel, 1 x coupling (2 fields) total 12 fields Iisdpfx Aeg Ur Nfem Doh

Condition: used, Operating unit, operating panel, operating panel, operating unit, foot switch, safety foot switch Iodshqf R Ijpfx Am Doih -Foot switch: Safety foot switch from press brake Promecam STPC 250 40 121 -Metal housing: with protective hood -Total dimensions: 500/400/H220 mm -Weight: 6.5 kg

Condition: new, Year of construction: 2025, DPF MASTER FLASH PROFESSIONAL™ A professional device for regenerating DPF/FAP/GPF filters and catalytic converters designed for passenger and delivery vehicles. It has a 185-liter tank, a pump with a capacity of up to 133 L/min, and an integrated drying system. The machine's interior is made of stainless steel (AISI 304) and acid-resistant steel (AISI 316). The cleaning technology operates in a closed-loop system using a hydrodynamic method. The device allows for filter contamination measurement both before and after regeneration, with results displayed in mbar. It features an integrated drying system with temperatures up to 100°C. After regeneration, a final backpressure measurement is taken and provided to the client as a printed report. This comprehensive cleaning process can restore the filter’s factory settings up to 99.9%. Components from leading European manufacturers have been used in the machine’s construction, ensuring the highest quality and reliability. TECHNICAL DATA: • Weight 600 kg • External dimension (L x W x H) 210 x 106 x 215 cm • Chamber dimension 140 x 69 x 107 cm • Tank capacity: 185 litres • Operating pressure 6-8bar • Maximum power 10 kW • Water inlet connection 1/2" • Water outlet connection 6/4" • Airflow: up to 390 m3 • Frequency 50 Hz • Hypertension up to 340 mbar • Safety features: temperature sensor, pressure sensor, door opening sensor, emergency safety switch EQUIPMENT: • 7″ color touch screen • sensors: liquid level, liquid and air temperature, pressure flow, door opening, disappearance and phase sequence • protections: emergency safety switch, end protections of the chamber door Iisdogllwiopfx Am Djh • filter contamination measuring system • AISI 316 stainless steel chamber • extended 3-stages liquid filtration system • integrated drying system in a smooth temperature range from 70 to 100 ° C • cooling the drying system • integrated thermal printer for printing filter parameters • Ethernet controller for remote diagnostics • set of connection adapters for DPF / FAP / GPF / KAT / SCR filters • starter kit for consumables (a set of filters + 2L XTON DPF Cleaner detergent) • liquid tank with a capacity of up to 185 liters • extended 12-month manufacturer’s warranty (optional 24 or 36 months) ADDITIONAL OPTIONS: • automatic double-sided filter cleaning • a second fluid circuit with an additional pump • thermal insulation of the liquid tank • automatic liquid top-up • automatic dosing of chemicals • quick-X filter mounting system • EURO5 and EURO6 adapter

Condition: used, Auxiliary switch, circuit breaker, fuse, line switch, line circuit breaker, switch disconnector, terminal plate, switch disconnector Isdpfxsffwpfj Am Djih -Rittal: SV9343.050 switch disconnector -Current strength: 160 A -Price: per piece -Number: 5 pieces -Dimensions: 215/105/H195 mm -Weight: 1.2 kg/piece

Condition: used, Year of construction: 2002, machine/vehicle number: 96.164, functionality: unexamined, overall weight: 3,000 kg, spindle diameter: 40 mm, number of spindles: 6, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of spindles: 6 Spindle 1 Spindle type: Bottom Spindle diameter: 40 mm Spindle 2 Spindle type: Right Motor power: 11 kW Spindle diameter: 40 mm Spindle 3 Spindle type: Left Spindle diameter: 40 mm Spindle 4 Spindle type: Top Motor power: 11 kW Spindle diameter: 40 mm Spindle 5 Spindle type: Top Motor power: 7.5 kW Spindle diameter: 40 mm Spindle 6 Spindle type: Bottom Motor power: 7.5 kW Spindle diameter: 40 mm Infeed table length: 945 mm Diameter of feed rollers: 140 mm Conveyor motor: 14 kW Conveyor drive: Cardan shaft drive Tool type: Standard Lubrication system: Manual MACHINE DETAILS Diameter of extraction nozzle: 140 mm Voltage: 400 V Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 4,100 x 2,100 x 2,400 mm Empty weight: 3,000 kg Transport packages: 1 EQUIPMENT Tools for Spindle 1 Tools for Spindle 2 Tools for Spindle 3 Tools for Spindle 5 Tools for Spindle 6 NOTE Spindle 1 Iodpoz Nir Rsfx Am Djih The brake is weak. The counter for the height adjustment is defective. Spindles 2 and 3 – shared motor The brake is defective. The height adjustment of Spindle 2 is very stiff and seized. The counters for the height and width adjustment of Spindle 2 are defective. The counters for the height and width adjustment of Spindle 3 are defective. Spindle 4 The spindle can only be turned with great difficulty; the bearings are defective. The height adjustment is seized. Spindle 5 The counter for the height adjustment is defective. Spindle 6 The width adjustment is seized, and the corresponding counter is defective. The motor emits a humming sound, presumably caused by the brake. Other defects The drive belts for spindles 1 and 6 are in very poor condition. The switch on the front of the machine for adjusting the table height is defective. The pressure reducing valve and the moisture separator need to be repaired or replaced. The lubrication pump is defective and needs to be repaired or replaced. The mechanism for speed regulation is defective and seized. The rubber coupling elements for the height adjustment are defective. Conclusion Due to the defects listed above, the machine could not be put into operation for testing purposes.

Condition: not inspected (used), Only sold as a set. We are interested in buying everything at once. Additional photos are available upon request. The price is negotiable. For more machines, parts, and other materials, please also visit our website, CNC-Service. Iodpfxezrv Avo Am Doih Do you have any questions or are you looking for something specific? Please feel free to contact us!

Condition: new, We are selling a Festo interface CPX-FB43, art. no. 550208, and a coupling block CPX-M-GE-EV-S, art. no. 8110369, as we do not require these parts after all. Purchased in 2025. Original net price approx. €460. Iisdpfx Amoy Ewuce Djh

Condition: good (used), Year of construction: 2011, machine/vehicle number: A05B-2551-B280, Fanuc LR mate in very good condition. It was removed from an injection moulding process where it loaded the the plastic blanks prior to forming and was only in production for 5 yrs. it comes with the robust R30iA controller which has ethernet connectivity to connect to your PLC or can be configured to work as a stand alone unit Iodpfx Amstiy Sgj Deih

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,270 h, laser type: fiber laser, laser power: 4,000 W, sheet thickness (max.): 20 mm, overall weight: 9,700 kg, year of last overhaul: 2025, The system must be dismantled between November 20, 2026, and November 22, 2026! TECHNICAL DETAILS Laser type: Fiber laser Laser power: 4,000 W Sheet metal thickness (max.): 20 mm Sheet metal thickness steel (max.): 20 mm Sheet metal thickness stainless steel (max.): 20 mm Sheet metal thickness aluminum (max.): 20 mm MACHINE DETAILS Control type: CNC control Automation level: Automatic Actuation type: Electric Power: 4 kW (5.44 hp) Input voltage: 400 V Input frequency: 50 Hz Type of cooling: Water Compressed air connection: 7 bar Laser operating hours: 13,270 h Year of last overhaul: 2025 Dimensions & Weight Dimensions (L x W x H): 9,310 x 7,813 x 2,300 mm Total weight: 9,700 kg EQUIPMENT CE marking Iedpfx Aez I S Uwjm Deih Central lubrication system Cooling unit Documentation/Manual Dust extraction Emergency stop switch Fume extraction Safety light curtain

Condition: used, CTS Type: TSS-70/130 Water-cooled cooling unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used for performing temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material tests Aging tests Electronics and component tests Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/130 Test volume: 130 liters Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from room temperature to +180°C Cooling rate: approx. 4 K/min from room temperature to -60°C Temperature deviation: ±1 K in time ±2 K spatially Temperature change rate: max. 100 K/min on average for shock test tests without heat input Temperature adjustment rate: ≤ 15 min in the range of -65°C to +200°C with 10 kg of ICs Cycle time: < 10 seconds Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 17.2 kW Rated current: approx. 29 A On-site protection: 32 A slow-blow fuse Connection: Cekon 32 Refrigeration system: Refrigerant: R404A / R23 water-cooled, low-noise, fully hermetic Equipment / Features: CTS control panel Microprocessor-controlled control and monitoring system Program operation up to 100 test programs possible digital setpoint and actual value display RS232 interface 2 free switching channels for on-site control of the test specimen Fault message on potential-free contact Load up to 30 V DC, 2 A EMC tested Technical design: Hot and cold chamber Mobile frame with lifting spindle drive Test chamber / mobile frame made of stainless steel, material no. 1.4301 Insert basket made of stainless steel wire Pipe passage NW 50 with sealing plug Compressed air connection 1/4" AG Condensate drain non-pressurized R 1/2" internal thread Safety door lock lockable door with window Iedpfx Amjy Hkd Ho Doih Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Loading dimension approx.: 1990 x 940 x 1652 mm Test chamber dimensions: height approx. 410 mm Width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Other data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: see pictures (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, CTS Type: T-70/600/S Water-cooled temperature testing chamber Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for external control of the test item Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at +0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test item, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Refrigerant: R404A / R23 Weight approx. 700 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Iiedpfx Amszg Ty Ij Djh Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, 3D SYSTEMS Professional MultiJet 3D Printer / MJP System 3D Systems ProJet MJP 2500 Plus MultiJet Printing with HD and UHD print modes For sale is a used, professional 3D printer from the manufacturer 3D Systems. The ProJet MJP 2500 Plus is suitable for producing precise plastic components, functional prototypes, concept models, as well as fixtures and tooling applications. Technical data: Manufacturer: 3D Systems Model: ProJet MJP 2500 Plus Technology: MultiJet Printing (MJP) Print modes: HD / UHD Max. build volume: 294 × 211 × 144 mm HD resolution: 800 × 900 × 790 DPI Layer thickness HD: 32 µm UHD resolution: 1600 × 900 × 790 DPI Layer thickness UHD: 32 µm Dimensions (W × D × H): 1120 × 740 × 1070 mm Weight: 211 kg Power supply: 200–240 V / 50 Hz / 1-phase / 10 A Internal hard drive: at least 500 GB Operating temperature: 18–28 °C Interfaces: Ethernet / USB Equipment: Integrated touch display Material system for build and support material Automatic switching of material cartridges Network connection USB connection 3D Sprint software support Material containers as shown in the pictures Application areas: Functional prototypes Concept models Iiedpoz Erdaefx Am Deh Form and fit testing Fixtures and holders Tooling applications Product development Additive manufacturing Scope of delivery: 1 × 3D Systems ProJet MJP 2500 Plus Material containers as shown in the pictures Additional accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Shipping via freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: excellent (used), I am offering for sale an original DELO DELO-UNIPRO controller, designed for industrial adhesive dispensing and curing systems. The device is fully functional – it powers on correctly, the display works, and the menu is clear and fully operational (as shown in the pictures). The visual condition is very good, with only minor signs of normal use. Technical specifications: • Manufacturer: DELO • Model: DELO-UNIPRO • Part number: 95 200 01 • Serial number: 1501 UNI 648 Iodsz Snrhepfx Am Deih • Power supply: 100–240 V AC • Frequency: 50–60 Hz • Power consumption: 40 W • Interfaces: RS232, CAN, USB, Ethernet, Input/Output, Foot Switch, and 4 channels (CH1–CH4) Included in the set: • DELO DELO-UNIPRO controller The item being sold is exactly as shown in the pictures.

Condition: used, VETTER Crane Technology PROFI Crane System / Two-Rail Portal Crane VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge, manual travel unit, and electric chain hoist. For sale is a used VETTER PROFI crane system from the manufacturer Vetter Krantechnik GmbH. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, as well as the safe lifting and positioning of heavy loads. Iodpfx Amoz Sn Dds Djih Technical data Manufacturer: Vetter Krantechnik GmbH Type: P300 Design: PROFI crane system as a two-rail portal with crane bridge Year of manufacture: 2020 Load capacity: 1,600 kg Span of crane bridge: 5,100 mm Support distance L: 5,590 mm Support distance B: 5,100 mm Beam length: 6,170 mm Overall dimensions of the system: approx. 6,040 x 5,800 mm Bottom edge of crane bridge: 4,145 mm Bottom edge of portal beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure group: 18/36/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Weight at 5 m lift: 65 kg Travel unit / trolley Manufacturer: Vetter Krantechnik GmbH Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail portal crane system Crane bridge Electric chain hoist SIXX8AF Manual travel unit SiCO-HF 2000 A Load hook Floor control Main switch Steel support and beam construction Inspection book available EC declaration of conformity available Documentation available Accessories according to pictures Application areas Mechanical engineering Assembly work Production Maintenance Workshop operation Material handling Logistics Longest component: approx. 6.2 m Heaviest single component: approx. 300 kg Total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition according to pictures System was installed and in operation Inspection book and documentation available Scope of delivery VETTER P300 PROFI crane system Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual travel unit SiCO-HF 2000 A Support and beam construction Floor control / operating elements Main switch Inspection book EC declaration of conformity Documentation Accessories according to pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight shipping possible. Subject to changes, errors and prior sale.

Condition: used, EA Elektro Automatik Type: EA-PS 8080-170 3U EA Elektro-Automatik EA-PS 8080-170 3U 19″ Rack – Laboratory power supply 0-80V / 0-170A, 5000W Iedpfszibh Esx Am Deih For sale is a high-quality, programmable laboratory DC power supply from the renowned company EA Elektro-Automatik GmbH & Co. KG. This is the EA-PS 8080-170 3U model with an output power of up to 5000 W. Special features: Autoranging (flexible combination of voltage/current up to maximum power) Remote Sense (up to 2.5 V compensation) Low ripple: < 10 mV RMS / < 100 mV pp Multiple interfaces for external control: USB, RS-232, CAN, LAN (Ethernet), GPIB (IEEE488), Profibus Analog control (0–5 V / 0–10 V) Fan-cooled, robust industrial design. Technical data: Output voltage: 0 … 80 V DC Output current: 0 … 170 A Maximum power: 5 kW Form factor: 19″ Rack, 3U Efficiency: approx. 93 % Weight: approx. 20 kg Scope of delivery: (See image) EA-PS 8080-170 3U power supply Power cable (Subject to change and errors in technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, Stäubli Type: TX90XL robot / CS8C controller Six-axis robot with controller For sale is a Stäubli TX90XL 6-axis industrial robot, including a CS8C controller and the original teach pendant. The TX90XL is suitable for pick & place, assembly, machine loading, part handling, as well as automation, testing and training applications. The XL version offers a large reach for flexible applications. Programming is done via VAL3. Technical data – Robot: Type: TX90XL Axes: 6 Payload: 4 kg Reach: approx. 1,400 mm Repeatability: ±0.035 mm Protection class, wrist: IP65 / IP67 Mounting: Floor / Wall / Ceiling Weight: approx. 115 kg Technical data – Controller: Controller: Stäubli CS8C Software: VAL3 Programming languages: VAL3, PLC IEC 61131-3 Interfaces: Ethernet, fieldbus, digital I/O, serial interfaces Supply: 3 × 400 V, 50/60 Hz Power consumption: approx. 2000 VA Protection class: IP20 Weight, controller: approx. 50 kg Important note: "The table shown in the photos is not included in the sale." Iijdpfozix Uisx Am Doh Condition: used Scope of delivery: (See picture) Stäubli TX90L robot arm CS8C controller Original teach pendant Connection cable (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Weiss   Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled   Item description:   For sale is a Weiss Technik TS 60 thermal shock test chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., according to IEC, MIL-STD, JEDEC) and has been well maintained.   Volume & Internal Dimensions:   Test volume: 60 liters   Internal dimensions of basket / test chamber (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm   Temperature ranges & cycling   Hot chamber +50 °C to +220 °C Cold chamber −72 °C to +70 °C   Transfer time (basket between both zones): < 10 seconds   Heating rate / heating speed up to 17 °C/min Cooling rate / cooling speed up to 3.7 °C/min   In single mode (cold zone only), heating rate: approx. 3.2 °C/min   Temperature deviation & homogeneity   Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Ijdpfx Aezii A Rsm Deih   Load / payload & lifting system   Basket / lifting system load: 20 kg maximum load capacity Transfer basket secured by protective grilles on all sides   Other features & equipment   Noise level: approx. 58 dB(A) during operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces   Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power approx. 8.5 kW Rated current approx. 25 A Fuse on customer's side 32 A Refrigerant R-404A / R-23   Weight: 800 kg   For your safety as a buyer, please note the following:   The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run.   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, ESPEC Temperature Shock Chamber ESPEC TSA-72EL-A Temperature Shock Chamber Water-cooled For sale is a used ESPEC temperature shock chamber, model TSA-72EL-A from the manufacturer ESPEC CORP. This chamber is suitable for temperature shock tests, temperature cycling tests, material testing, electronics testing, automotive applications, quality assurance, and research and development. Technical Data Manufacturer: ESPEC CORP. Model: TSA-72EL-A Type of equipment: Temperature Shock Chamber System: 2-zone testing with damper switching Design: Air-cooled Test chamber volume: approx. 72 liters Internal dimensions of test chamber (W × H × D): 410 × 460 × 370 mm External dimensions (W × H × D): 1310 × 1900 × 1470 mm Weight: approx. 900 kg Temperature range, hot chamber: +50 °C to +200 °C Temperature range, cold chamber: -65 °C to 0 °C Temperature stability: ±0.5 °C Preheating temperature: up to +205 °C Iiodozhkfqspfx Am Deh Pre-cooling temperature: up to -75 °C Heating time: from ambient temperature to +200 °C within approx. 15 minutes Cooling time: from ambient temperature to -70 °C within approx. 40 minutes Temperature recovery condition: +125 °C / 30 min. to -40 °C / 30 min. Temperature recovery time: within approx. 5 minutes Max. test chamber load: 30 kg evenly distributed Cable entry: Ø approx. 50 mm Compressed air supply: 0.4 to 0.7 MPa / 4 to 7 bar Refrigerant, high-temperature side: R404A Refrigerant, low-temperature side: R23 Power supply: AC 400 V / 3 phases / 50 Hz Max. current consumption: 45 A Features Color touchscreen control TFT color LCD, 10.4 inches PID temperature control Program memory Trend graphics Alarm history Eco mode Automatic defrost RS-485 interface Over-temperature / under-temperature protection Vertical sliding door Stainless steel test chamber Mechanical cascade refrigeration system Electronic expansion valve Sirocco circulating air fan Damper drive via air cylinder 2 stainless steel test inserts Cable entry, Ø approx. 50 mm Application areas Temperature shock testing Temperature cycling testing Electronics testing Semiconductor testing Automotive Component testing Material testing Quality assurance Research and development Condition Used Optical condition as shown in the images Scope of delivery 1x ESPEC TSA-72EL-A Temperature Shock Chamber 2x Stainless steel test inserts Accessories as shown in the images Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Inspection possible by appointment. Forklift available for loading. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Keysight Mixed Signal Oscilloscope / Digital Storage Oscilloscope Keysight / Agilent InfiniiVision MSO-X 3034A 350 MHz Mixed Signal Oscilloscope with 4 analog channels, 16 digital channels, and 4 GSa/s sampling rate For sale is a used Mixed Signal Oscilloscope from the manufacturer Keysight Technologies / Agilent Technologies. The device is suitable for precise signal and measurement tasks in development, laboratories, service, training, research, as well as industrial electronics and quality assurance. Technical data Manufacturer: Keysight Technologies / Agilent Technologies Type: MSO-X 3034A Series: InfiniiVision Device type: Mixed Signal Oscilloscope / Digital Storage Oscilloscope Bandwidth: 350 MHz Analog channels: 4 Digital channels: 16 Max. sampling rate: 4 GSa/s Display: Color display MegaZoom technology Inputs: 4x analog BNC inputs Digital input / Logic connector USB port USB Device / USB Host Trigger Out Ext. Trigger / Calibration connector Power connection: 100 - 240 V AC 50 / 60 Hz Power consumption: max. 100 W Dimensions: approx. 381 × 204 × 142 mm Weight: approx. 4 kg Features Large color display Front-panel control buttons 4 analog channels 16 digital channels USB interfaces Trigger functions Analysis functions Measurement functions Storage and printing functions Carrying handle Accessories as shown in the pictures Application areas Isdpfxozh I Dwe Am Djih Electronics development Laboratory Service Troubleshooting Signal testing Printed circuit board testing Training Research and development Quality assurance Industrial electronics Scope of delivery Keysight / Agilent InfiniiVision MSO-X 3034A 3x probes as shown in the pictures Power cable Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Device can be switched on Display and operation appear to be functioning properly Test seals / stickers as shown in the pictures are present Weight: approx. 4 kg The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping is possible. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, HUBER Water-cooled recirculating chiller Huber Unichiller 060Tw High-performance process chiller with Pilot ONE touchscreen control For sale is a used water-cooled recirculating chiller from Peter Huber Kältemaschinenbau. The unit is suitable for the precise temperature control and cooling of machines, technical equipment, laboratory applications, chemical processes, and industrial process circuits. Technical data: Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 060Tw Type of unit: Water-cooled recirculating chiller Temperature range: -20 to +40 °C Cooling capacity: at +15 °C: 6.0 kW at 0 °C: 5.0 kW at -10 °C: 3.1 kW at -20 °C: 1.7 kW Temperature stability at -10 °C: 0.5 K Internal temperature sensor: Pt100 Connection for external sensor: Pt100 Safety class: I / NFL Protection class: IP20 Dimensions: approx. 600 × 600 × 1450 mm (W × D × H) Weight: approx. 213 kg net Mains connection: 460 V / 3 Ph / 60 Hz Max. power consumption: 10 A Fuse rating: 3 × 16 A Refrigerant: R507 Refrigerant quantity: 1.2 kg Max. pressure: 25 bar CFC and HCFC-free Circulation pump: Pump type: C3 Max. flow rate: 122 l/min Max. pump pressure: 5.6 bar Pump connection: G1 1/4 AG Cooling water: Cooling water connection: G1/2 AG Min. cooling water differential pressure: 1 bar Max. cooling water pressure: 6 bar Cooling water consumption at 15 °C cooling water: Supply +15 °C: approx. 330 l/h Supply 0 °C: approx. 230 l/h Supply -10 °C: approx. 152 l/h Supply -20 °C: approx. 70 l/h Min. filling volume: 5.9 l Expansion volume: 7.5 l Permissible ambient temperature: +5 to +40 °C Pilot ONE control: 5.7" color touchscreen Graphical temperature display Program generator / ramp functions Digital level indicator Multilingual menu navigation Interfaces: Ethernet USB Host / Device RS232 / Serial Ijdjzui Tgepfx Am Dsih Pt100 connection for external temperature sensor Equipment: Water-cooled chiller C3 circulation pump Pilot ONE touchscreen controller 5.7" color display Digital level indicator Atmospheric open expansion tank Stainless steel housing Stainless steel circulation pump Copper-brazed evaporator Main switch RS232 interface USB interfaces Ethernet interface Pt100 connection Cooling water connections Process connections Castors Connection hoses as shown in the pictures Applications: Process cooling Machine cooling Laboratory applications Chemical processes Technical equipment Production equipment Cooling water supply Research and development Scope of supply: 1 × Huber Unichiller 060Tw recirculating chiller Connection hoses and accessories as shown in the pictures Condition: Used Unit can be switched on Pilot ONE touchscreen is functional and displays the operating menu Optical condition as shown in the pictures The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, VETTER Krantechnik PROFI Crane System / Two-Rail Portal Crane VETTER P300 PROFI Crane System Two-rail portal crane with crane bridge, manual travel unit, and electric chain hoist For sale is a used VETTER PROFI crane system from the manufacturer Vetter Krantechnik GmbH. The system is suitable for assembly work, production, mechanical engineering, maintenance, logistics, as well as the safe lifting and positioning of heavy loads. Technical data Manufacturer: Vetter Krantechnik GmbH Type: P300 Design: PROFI Crane System as a two-rail portal with crane bridge Year of manufacture: 2020 Load capacity: 1,600 kg Span of crane bridge: 5,890 mm Support distance L: 5,590 mm Support distance B: 5,890 mm Beam length: 6,390 mm Overall dimensions of the system: approx. 6,590 x 6,590 mm UK crane bridge: 4,145 mm UK portal beam: 4,567 mm Overall height: 4,905 mm Classification according to EN 15011: HC2 / S2 Steel structure: 18/30/30 Operating voltage: 400 V / 50 Hz Control voltage: 24 V Max. permissible hoist weight: 85 kg Electric chain hoist Manufacturer: Vetter Krantechnik GmbH Type: SIXX8AF Year of manufacture: 2020 Load capacity: 1,600 kg Lifting speed: 4.0 / 1.0 m/min Lifting motor power: 1.50 / 0.37 kW Rated current: 7.7 / 5.4 A FEM class: 2m / M5 Protection class: IP55 Duty cycle: 40 % Number of load chains: 2 Weight at 5 m lift: 65 kg Travel unit / Trolley Manufacturer: Vetter Krantechnik GmbH Type: SiCO-HF 2000 A Variant A Load capacity: 2,000 kg Beam width: 66 - 220 mm Weight: 17 kg Equipment Two-rail portal crane system Crane bridge Electric chain hoist SIXX8AF Manual travel unit SiCO-HF 2000 A Load hook Floor control Main switch Conductor rail / Power supply Steel support and beam structure Documentation / Crane test book available Hoist test book available EC declaration of conformity (crane) available EC declaration of conformity (hoist) available Assembly and operating instructions available Accessories as shown in the pictures Application areas Mechanical engineering Assembly work Production Maintenance Workshop operations Material handling Logistics Longest component: approx. 6.4 m Heaviest single component: approx. 300 kg Total weight of the system is approximately between 2,000 and 3,500 kg, depending on the installed steel profiles and foundation plates. Condition Used Optical condition as shown in the pictures System was assembled and in operation Test book and documentation available Scope of delivery VETTER P300 PROFI Crane System Crane bridge Electric chain hoist SIXX8AF 1.6 t Manual travel unit SiCO-HF 2000 A Support and beam structure Control / Operating elements Main switch Documentation / Test book EC declarations of conformity Assembly and operating instructions Accessories according to pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Iiedpfx Amszgv U Us Dsh Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Anton Paar Modular Rotational Rheometer / Precision Rheometer Software: Anton Paar Rheoplus (original CD included) Device driver and license diskette available Anton Paar Physica MCR 301 Professional rotational and oscillatory rheometer for research, development, quality control and material testing For sale is a used rotational rheometer from the manufacturer Anton Paar. The device is suitable for highly precise rheological characterization of liquids, polymers, dispersions, emulsions, pastes, gels and other materials. The MCR 301 is one of the professional laboratory instruments for research, development, quality assurance and industrial material testing. Technical data: Manufacturer: Anton Paar GmbH Type: Physica MCR 301 Device type: Modular rotational rheometer Measuring principle: Rotational and oscillatory rheometer Drive: Air-bearing EC servo motor (Air Bearing Technology) Normal force measurement integrated Modular measuring system for different measuring geometries Power connection: AC 100–240 V Mains frequency: 50–60 Hz Power consumption: 850 W PC connection: RS-232 / Ethernet (depending on the configuration) Software: Anton Paar Rheoplus Operation via LCD display and membrane keypad Environmental conditions: Operating temperature: 15 °C to 35 °C Recommended ambient temperature: 23 °C ±3 °C Storage temperature: -20 °C to +50 °C Relative humidity: 20–60 % (non-condensing) Dimensions: approx. 610 × 420 × 670 mm (L × W × H) Weight: approx. 48 kg Measurement possibilities: Rotational measurements Oscillatory measurements Viscosity measurements Flow curves Shear stress Creep tests Relaxation measurements Amplitude sweeps Frequency sweeps Material characterization Equipment: Air-bearing precision drive LCD display with control panel Electronic control Measuring head Measuring platform PC interfaces Iedpfx Amozicwuj Doih Rheoplus software CD Original documentation Operating manual Diskette with software data Connection cable Accessories as shown in the pictures Application areas: Research & Development Laboratory Quality assurance Chemical industry Pharmaceutical industry Cosmetics industry Food industry Polymer technology Materials science Universities Testing laboratories Scope of delivery: Anton Paar Physica MCR 301 Original Rheoplus software CD Original operating manual Documentation folder Diskette Connection cable Other accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age are present. Nameplate is present. The table shown in the photos or other items not explicitly mentioned are not included in the sale. Shipping by freight forwarder or parcel service is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone or email.

Condition: used, GE Druck Modular High-Precision Pressure Controller / Pneumatic Pressure Controller PACE5000 Professional High-Precision Pressure Controller for calibration, pressure testing, automation, and laboratory applications For sale is a used high-precision pressure controller from the manufacturer GE Druck. The PACE5000 is a modular, high-precision pressure control system designed for the most demanding applications in calibration laboratories, research, development, production, and quality assurance. Due to its high control speed and precision, the device is ideally suited for automatic pressure tests, calibration tasks, and industrial measuring and testing systems. Technical data: Manufacturer: GE Druck (Baker Hughes) Model: PACE5000 Device type: Modular High-Precision Pressure Controller Pneumatic Control Module: CM0-B-16G Dimensions: approx. 440 × 88 × 320 mm (W × H × D) Weight: approx. 10.1 kg Control range: -1 to 70 bar(g) Maximum permissible operating pressure (MWP): 94 bar Accuracy: up to 0.001% of the final value (model-dependent) Long-term stability up to 0.001% FV Features: Modular control system Very high pressure control speed Automatic pressure control Pressure testing Leak test function Burst test Switch test Programmable test sequences User-defined pressure units Display: Color touch display Graphical user interface Display of setpoint and actual value Intuitive menu navigation Interfaces: Ethernet USB Host USB Device RS-232 CAN IEEE-488 (GPIB) 24 V DC inputs/outputs Pneumatic connections: Supply Output Vent Reference G1/8" connection Power connection: 100–230 VAC 50–60 Hz Power consumption: max. 100 VA Application areas: Calibration laboratory Testing systems Quality assurance Automotive industry Aerospace Ijdpjziyqrsfx Am Djih Mechanical engineering Measurement technology Research & Development Automation technology Pressure sensor calibration Equipment: Color display Pneumatic Control Module Ethernet USB RS232 CAN IEEE-488 (GPIB) Pressure connections Power cable Accessories as shown in the pictures Scope of delivery: GE Druck PACE5000 Power cable Accessories as shown in the pictures Weight: approx. 10.1 kg Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age are present. The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping via parcel service or freight forwarder is possible. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone or e-mail.

Condition: used, FRIULAIR Industrial Chiller / Water Cooler / Chiller Friulair CWE068 Nominal cooling capacity 48.5 kW according to the nameplate Year of manufacture 2023 – air-cooled industrial chiller with integrated water circuit For sale is a used industrial chiller from the manufacturer Friulair S.r.l., model CWE068. The chiller is suitable for cooling industrial plants, machines, test benches, production facilities, and process circuits. The CWE series is designed as an air-cooled water cooling system for industrial continuous applications. Technical data: Manufacturer: Friulair S.r.l. Model: CWE068 Code: CWE068CQ27151 Type of equipment: Industrial chiller Year of manufacture: May 2023 Country of manufacture: Italy Cooling capacity according to the nameplate: 48.5 kW Operating conditions according to the nameplate: Ambient air: 35 °C Water inlet: 12 °C Water outlet: 7 °C Refrigerant circuit: Refrigerant: R410A Filling quantity: 6.0 kg Refrigerant circuit volume: 3.2 liters CO₂ equivalent: 12.53 t GWP: 2088 Max. operating pressure high-pressure side: 41.5 bar Max. operating pressure low-pressure side: 29 bar Temperature range refrigerant circuit: -10 °C to +120 °C Water circuit: Water volume: 200 liters Max. operating pressure: 6 bar Temperature range water circuit: -10 °C to +30 °C Electrical data: Power connection: 3 / 400 V AC ±10 % / 50 Hz Electrical power according to the nameplate: 24.1 kW Current draw: 41.3 A FLA: 47.4 A Fuse rating: 63 A Protection class: IP54 Equipment: Air-cooled chiller Axial fans Integrated refrigerant circuit Integrated water circuit / buffer tank Circulating pump Manometers for high and low pressure Pressure gauge water circuit Main switch Electrical control Hydraulic inlet and outlet connections Closed industrial housing Applications: Industrial cooling Process cooling Machine cooling Test bench cooling Production facilities Machine tools Laser systems Plastics processing Electronics and power electronics testing Research and development Dimensions / Transport: Iisdezy U Uaepfx Am Djh Dimensions (L × W × H): approx. 1,890 × 925 × 1,615 mm Empty weight: approx. 390 kg The transport data is based on the manufacturer's information for the corresponding CWE model size. The actual external dimensions can be checked again before shipment. Condition: Used Year of manufacture 2023 Optical condition according to the pictures. Scope of delivery: 1 x Friulair CWE068 industrial chiller Equipment and connections as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures. Shipping by freight forwarder is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by phone.